diff --git a/wled00/data/settings_2D.htm b/wled00/data/settings_2D.htm index ffac029d6..00970e494 100644 --- a/wled00/data/settings_2D.htm +++ b/wled00/data/settings_2D.htm @@ -7,7 +7,7 @@ 2D Set-up - + + + + DMX Settings + +
diff --git a/wled00/data/settings_leds.htm b/wled00/data/settings_leds.htm index 45eb49800..824e37837 100644 --- a/wled00/data/settings_leds.htm +++ b/wled00/data/settings_leds.htm @@ -1,327 +1,327 @@ - + - + LED Settings -
+
-
-

LED & Hardware setup

- Total LEDs: ?
- Recommended power supply for brightest white:
- ?
-
-
- Enable automatic brightness limiter:
-
- Maximum Current: mA
- - Automatically limits brightness to stay close to the limit.
- Keep at <1A if powering LEDs directly from the ESP 5V pin!
- If you are using an external power supply, enter its rating.
- (Current estimated usage: unknown)

- LED voltage (Max. current for a single LED):
-
- - Keep at default if you are unsure about your type of LEDs.
-
-

Hardware setup

-
LED outputs:
-
- -
- LED Memory Usage: 0 / ? B
-

- -
- Make a segment for each output:
- Custom bus start indices:
- Use global LED buffer:
-
-
- Color Order Override: -
-
- -
-
-
-
- Disable internal pull-up/down:
- Touch threshold:
- IR GPIO:  ✕
- Apply IR change to main segment only:
- - IR info
- Relay GPIO: Invert  ✕
-
+
+

LED & Hardware setup

+ Total LEDs: ?
+ Recommended power supply for brightest white:
+ ?
+
+
+ Enable automatic brightness limiter:
+
+ Maximum Current: mA
+ + Automatically limits brightness to stay close to the limit.
+ Keep at <1A if powering LEDs directly from the ESP 5V pin!
+ If you are using an external power supply, enter its rating.
+ (Current estimated usage: unknown)

+ LED voltage (Max. current for a single LED):
+
+ + Keep at default if you are unsure about your type of LEDs.
+
+

Hardware setup

+
LED outputs:
+
+ +
+ LED Memory Usage: 0 / ? B
+

+ +
+ Make a segment for each output:
+ Custom bus start indices:
+ Use global LED buffer:
+
+
+ Color Order Override: +
+
+ +
+
+
+
+ Disable internal pull-up/down:
+ Touch threshold:
+ IR GPIO:  ✕
+ Apply IR change to main segment only:
+ + IR info
+ Relay GPIO: Invert  ✕
+

Defaults

Turn LEDs on after power up/reset:
- Default brightness: (0-255)

- Apply preset at boot (0 uses defaults) -

+ Default brightness: (0-255)

+ Apply preset at boot (0 uses defaults) +

Use Gamma correction for color: (strongly recommended)
Use Gamma correction for brightness: (not recommended)

Brightness factor: % @@ -651,7 +651,7 @@ Length: min
Default Target brightness:
Mode: - @@ -660,18 +660,18 @@ Length:
- Global override for Auto-calculate white:
- -
- Calculate CCT from RGB:
- CCT additive blending: % -

Advanced

+ Global override for Auto-calculate white:
+ +
+ Calculate CCT from RGB:
+ CCT additive blending: % +

Advanced

Palette blending: None (not recommended)
Target refresh rate: FPS -
-
Config template:
-
- +
+
Config template:
+
+
-
+
diff --git a/wled00/data/settings_pin.htm b/wled00/data/settings_pin.htm index 67eb1b262..5c70d423c 100644 --- a/wled00/data/settings_pin.htm +++ b/wled00/data/settings_pin.htm @@ -17,7 +17,7 @@

Please enter settings PIN code

-
+
diff --git a/wled00/data/settings_sec.htm b/wled00/data/settings_sec.htm index 16f2f64b8..950614960 100644 --- a/wled00/data/settings_sec.htm +++ b/wled00/data/settings_sec.htm @@ -53,7 +53,7 @@ req.send(formData); fO.value = ''; return false; - } + } function checkNum(o) { const specialkeys = ["Backspace", "Tab", "Enter", "Shift", "Control", "Alt", "Pause", "CapsLock", "Escape", "Space", "PageUp", "PageDown", "End", "Home", "ArrowLeft", "ArrowUp", "ArrowRight", "ArrowDown", "Insert", "Delete"]; // true if key is a number or a special key diff --git a/wled00/data/settings_sync.htm b/wled00/data/settings_sync.htm index 30d794797..a15e6fef7 100644 --- a/wled00/data/settings_sync.htm +++ b/wled00/data/settings_sync.htm @@ -1,74 +1,74 @@ - - - - Sync Settings - - + } + var url = (loc?`http://${locip}`:'') + '/settings/s.js?p=4'; + loadJS(url, false); // If we set async false, file is loaded and executed, then next statement is processed + } + +
@@ -84,39 +84,39 @@ UDP Port: - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
12345678
Send:
Receive:
12345678
Send:
Receive:

Receive: Brightness, Color, and Effects
Segment options, bounds
@@ -171,7 +171,7 @@ Realtime LED offset:

Alexa Voice Assistant

- This firmware build does not include Alexa support.

+ This firmware build does not include Alexa support.

Emulate Alexa device:
@@ -187,7 +187,7 @@ For best results, only use one of these services at a time.

Blynk

- This firmware build does not include Blynk support.
 + This firmware build does not include Blynk support.
Host: @@ -197,7 +197,7 @@ Device Auth token:

MQTT

- This firmware build does not include MQTT support.
 + This firmware build does not include MQTT support.
Enable MQTT:
@@ -215,7 +215,7 @@ Publish on button press:

Philips Hue

- This firmware build does not include Philips Hue support.
 + This firmware build does not include Philips Hue support.
You can find the bridge IP and the light number in the 'About' section of the hue app.
diff --git a/wled00/data/settings_time.htm b/wled00/data/settings_time.htm index d6d7a052f..d26a89218 100644 --- a/wled00/data/settings_time.htm +++ b/wled00/data/settings_time.htm @@ -6,8 +6,8 @@ Time Settings