mirror of
https://github.com/wled/WLED.git
synced 2025-04-23 22:37:18 +00:00
Trim platformio.ini & add info to sample
This commit is contained in:
Blaz Kristan
parent
5dd8f0a0b7
commit
78aeca6399
406
platformio.ini
406
platformio.ini
@ -9,40 +9,9 @@
|
||||
# (use `platformio_override.ini` when building for your own board; see `platformio_override.ini.sample` for an example)
|
||||
# ------------------------------------------------------------------------------
|
||||
|
||||
# CI binaries
|
||||
; default_envs = nodemcuv2, esp8266_2m, esp01_1m_full, esp32dev, esp32_eth # ESP32 variant builds are temporarily excluded from CI due to toolchain issues on the GitHub Actions Linux environment
|
||||
# CI/release binaries
|
||||
default_envs = nodemcuv2, esp8266_2m, esp01_1m_full, esp32dev, esp32_eth, esp32dev_audioreactive, lolin_s2_mini, esp32c3dev, esp32s3dev_8MB, esp32s3dev_8MB_PSRAM_opi
|
||||
|
||||
# Release binaries
|
||||
; default_envs = nodemcuv2, esp8266_2m, esp01_1m_full, esp32dev, esp32_eth, lolin_s2_mini, esp32c3dev, esp32s3dev_8MB
|
||||
|
||||
# Build everything
|
||||
; default_envs = esp32dev, esp8285_4CH_MagicHome, codm-controller-0_6-rev2, codm-controller-0_6, esp32s2_saola, d1_mini_5CH_Shojo_PCB, d1_mini, sp501e, nodemcuv2, esp32_eth, anavi_miracle_controller, esp07, esp01_1m_full, m5atom, h803wf, d1_mini_ota, heltec_wifi_kit_8, esp8285_H801, d1_mini_debug, wemos_shield_esp32, elekstube_ips
|
||||
|
||||
# Single binaries (uncomment your board)
|
||||
; default_envs = elekstube_ips
|
||||
; default_envs = nodemcuv2
|
||||
; default_envs = esp8266_2m
|
||||
; default_envs = esp01_1m_full
|
||||
; default_envs = esp07
|
||||
; default_envs = d1_mini
|
||||
; default_envs = heltec_wifi_kit_8
|
||||
; default_envs = h803wf
|
||||
; default_envs = d1_mini_debug
|
||||
; default_envs = d1_mini_ota
|
||||
; default_envs = esp32dev
|
||||
; default_envs = esp8285_4CH_MagicHome
|
||||
; default_envs = esp8285_H801
|
||||
; default_envs = d1_mini_5CH_Shojo_PCB
|
||||
; default_envs = wemos_shield_esp32
|
||||
; default_envs = m5atom
|
||||
; default_envs = esp32_eth
|
||||
; default_envs = esp32dev_qio80
|
||||
; default_envs = esp32_eth_ota1mapp
|
||||
; default_envs = esp32s2_saola
|
||||
; default_envs = esp32c3dev
|
||||
; default_envs = lolin_s2_mini
|
||||
|
||||
src_dir = ./wled00
|
||||
data_dir = ./wled00/data
|
||||
build_cache_dir = ~/.buildcache
|
||||
@ -62,7 +31,7 @@ arduino_core_2_7_4 = espressif8266@2.6.2
|
||||
arduino_core_3_0_0 = espressif8266@3.0.0
|
||||
arduino_core_3_2_0 = espressif8266@3.2.0
|
||||
arduino_core_4_1_0 = espressif8266@4.1.0
|
||||
arduino_core_3_1_2 = espressif8266@4.2.0
|
||||
arduino_core_3_1_2 = espressif8266@4.2.1
|
||||
|
||||
# Development platforms
|
||||
arduino_core_develop = https://github.com/platformio/platform-espressif8266#develop
|
||||
@ -132,12 +101,7 @@ build_flags =
|
||||
-D DECODE_SONY=true
|
||||
-D DECODE_SAMSUNG=true
|
||||
-D DECODE_LG=true
|
||||
;-Dregister= # remove warnings in C++17 due to use of deprecated register keyword by the FastLED library ;; warning: this breaks framework code on ESP32-C3 and ESP32-S2
|
||||
-DWLED_USE_MY_CONFIG
|
||||
; -D USERMOD_SENSORSTOMQTT
|
||||
#For ADS1115 sensor uncomment following
|
||||
; -D USERMOD_ADS1115
|
||||
; -D USERMOD_ANIMARTRIX
|
||||
|
||||
build_unflags =
|
||||
|
||||
@ -183,28 +147,34 @@ lib_deps =
|
||||
IRremoteESP8266 @ 2.8.2
|
||||
makuna/NeoPixelBus @ 2.7.5
|
||||
https://github.com/Aircoookie/ESPAsyncWebServer.git @ ~2.0.7
|
||||
# for I2C interface
|
||||
;Wire
|
||||
# ESP-NOW library (includes mandatory QuickDebug library)
|
||||
; gmag11/QuickESPNow @ 0.6.2
|
||||
;gmag11/QuickESPNow @ 0.6.2
|
||||
https://github.com/blazoncek/QuickESPNow.git#optional-debug
|
||||
#For use of the TTGO T-Display ESP32 Module with integrated TFT display uncomment the following line
|
||||
#TFT_eSPI
|
||||
#For compatible OLED display uncomment following
|
||||
#U8g2 #@ ~2.33.15
|
||||
#olikraus/U8g2 #@ ~2.33.15
|
||||
#For Dallas sensor uncomment following
|
||||
#OneWire @ ~2.3.7
|
||||
#paulstoffregen/OneWire @ ~2.3.8
|
||||
#For BME280 sensor uncomment following
|
||||
#BME280 @ ~3.0.0
|
||||
; adafruit/Adafruit BMP280 Library @ 2.1.0
|
||||
; adafruit/Adafruit CCS811 Library @ 1.0.4
|
||||
; adafruit/Adafruit Si7021 Library @ 1.4.0
|
||||
;adafruit/Adafruit BMP280 Library @ 2.1.0
|
||||
;adafruit/Adafruit CCS811 Library @ 1.0.4
|
||||
;adafruit/Adafruit Si7021 Library @ 1.4.0
|
||||
#For ADS1115 sensor uncomment following
|
||||
; adafruit/Adafruit BusIO @ 1.13.2
|
||||
; adafruit/Adafruit ADS1X15 @ 2.4.0
|
||||
;adafruit/Adafruit BusIO @ 1.13.2
|
||||
;adafruit/Adafruit ADS1X15 @ 2.4.0
|
||||
#For MPU6050 IMU uncomment follwoing
|
||||
; electroniccats/MPU6050 @1.0.1
|
||||
# For -D USERMOD_ANIMARTRIX
|
||||
# CC BY-NC 3.0 licensed effects by Stefan Petrick, include this usermod only if you accept the terms!
|
||||
; https://github.com/netmindz/animartrix.git#18bf17389e57c69f11bc8d04ebe1d215422c7fb7
|
||||
;electroniccats/MPU6050 @1.0.1
|
||||
# For -D USERMOD_ANIMARTRIX
|
||||
# CC BY-NC 3.0 licensed effects by Stefan Petrick, include this usermod only if you accept the terms!
|
||||
;https://github.com/netmindz/animartrix.git#18bf17389e57c69f11bc8d04ebe1d215422c7fb7
|
||||
# SHT85
|
||||
;robtillaart/SHT85@~0.3.3
|
||||
# Audioreactive usermod
|
||||
;https://github.com/kosme/arduinoFFT#develop @ 1.9.2+sha.419d7b0 ;; used for USERMOD_AUDIOREACTIVE - using "known working" hash
|
||||
|
||||
extra_scripts = ${scripts_defaults.extra_scripts}
|
||||
|
||||
@ -366,44 +336,6 @@ build_flags = ${common.build_flags_esp8266} -D WLED_RELEASE_NAME=ESP01 -D WLED_D
|
||||
; -D WLED_USE_UNREAL_MATH ;; may cause wrong sunset/sunrise times, but saves 7064 bytes FLASH and 975 bytes RAM
|
||||
lib_deps = ${esp8266.lib_deps}
|
||||
|
||||
[env:esp07]
|
||||
board = esp07
|
||||
platform = ${common.platform_wled_default}
|
||||
platform_packages = ${common.platform_packages}
|
||||
board_build.ldscript = ${common.ldscript_4m1m}
|
||||
build_unflags = ${common.build_unflags}
|
||||
build_flags = ${common.build_flags_esp8266}
|
||||
lib_deps = ${esp8266.lib_deps}
|
||||
|
||||
[env:d1_mini]
|
||||
board = d1_mini
|
||||
platform = ${common.platform_wled_default}
|
||||
platform_packages = ${common.platform_packages}
|
||||
upload_speed = 921600
|
||||
board_build.ldscript = ${common.ldscript_4m1m}
|
||||
build_unflags = ${common.build_unflags}
|
||||
build_flags = ${common.build_flags_esp8266}
|
||||
lib_deps = ${esp8266.lib_deps}
|
||||
monitor_filters = esp8266_exception_decoder
|
||||
|
||||
[env:heltec_wifi_kit_8]
|
||||
board = d1_mini
|
||||
platform = ${common.platform_wled_default}
|
||||
platform_packages = ${common.platform_packages}
|
||||
board_build.ldscript = ${common.ldscript_4m1m}
|
||||
build_unflags = ${common.build_unflags}
|
||||
build_flags = ${common.build_flags_esp8266}
|
||||
lib_deps = ${esp8266.lib_deps}
|
||||
|
||||
[env:h803wf]
|
||||
board = d1_mini
|
||||
platform = ${common.platform_wled_default}
|
||||
platform_packages = ${common.platform_packages}
|
||||
board_build.ldscript = ${common.ldscript_4m1m}
|
||||
build_unflags = ${common.build_unflags}
|
||||
build_flags = ${common.build_flags_esp8266} -D LEDPIN=1 -D WLED_DISABLE_INFRARED
|
||||
lib_deps = ${esp8266.lib_deps}
|
||||
|
||||
[env:esp32dev]
|
||||
board = esp32dev
|
||||
platform = ${esp32.platform}
|
||||
@ -428,33 +360,6 @@ board_build.partitions = ${esp32.default_partitions}
|
||||
; board_build.f_flash = 80000000L
|
||||
; board_build.flash_mode = dio
|
||||
|
||||
[env:esp32dev_qio80]
|
||||
board = esp32dev
|
||||
platform = ${esp32.platform}
|
||||
platform_packages = ${esp32.platform_packages}
|
||||
build_unflags = ${common.build_unflags}
|
||||
build_flags = ${common.build_flags_esp32} -D WLED_RELEASE_NAME=ESP32_qio80 #-D WLED_DISABLE_BROWNOUT_DET
|
||||
lib_deps = ${esp32.lib_deps}
|
||||
monitor_filters = esp32_exception_decoder
|
||||
board_build.partitions = ${esp32.default_partitions}
|
||||
board_build.f_flash = 80000000L
|
||||
board_build.flash_mode = qio
|
||||
|
||||
[env:esp32dev_V4_dio80]
|
||||
;; experimental ESP32 env using ESP-IDF V4.4.x
|
||||
;; Warning: this build environment is not stable!!
|
||||
;; please erase your device before installing.
|
||||
board = esp32dev
|
||||
platform = ${esp32_idf_V4.platform}
|
||||
platform_packages = ${esp32_idf_V4.platform_packages}
|
||||
build_unflags = ${common.build_unflags}
|
||||
build_flags = ${common.build_flags} ${esp32_idf_V4.build_flags} -D WLED_RELEASE_NAME=ESP32_V4_qio80 #-D WLED_DISABLE_BROWNOUT_DET
|
||||
lib_deps = ${esp32_idf_V4.lib_deps}
|
||||
monitor_filters = esp32_exception_decoder
|
||||
board_build.partitions = ${esp32_idf_V4.default_partitions}
|
||||
board_build.f_flash = 80000000L
|
||||
board_build.flash_mode = dio
|
||||
|
||||
[env:esp32_eth]
|
||||
board = esp32-poe
|
||||
platform = ${esp32.platform}
|
||||
@ -466,20 +371,6 @@ build_flags = ${common.build_flags_esp32} -D WLED_RELEASE_NAME=ESP32_Ethernet -D
|
||||
lib_deps = ${esp32.lib_deps}
|
||||
board_build.partitions = ${esp32.default_partitions}
|
||||
|
||||
[env:esp32s2_saola]
|
||||
board = esp32-s2-saola-1
|
||||
platform = https://github.com/tasmota/platform-espressif32/releases/download/v2.0.2.2/platform-tasmota-espressif32-2.0.2.zip
|
||||
platform_packages =
|
||||
framework = arduino
|
||||
board_build.partitions = tools/WLED_ESP32_4MB_1MB_FS.csv
|
||||
board_build.flash_mode = qio
|
||||
upload_speed = 460800
|
||||
build_unflags = ${common.build_unflags}
|
||||
build_flags = ${common.build_flags} ${esp32s2.build_flags} #-D WLED_RELEASE_NAME=S2_saola
|
||||
;-DLOLIN_WIFI_FIX ;; try this in case Wifi does not work
|
||||
-DARDUINO_USB_CDC_ON_BOOT=1
|
||||
lib_deps = ${esp32s2.lib_deps}
|
||||
|
||||
[env:esp32c3dev]
|
||||
extends = esp32c3
|
||||
platform = ${esp32c3.platform}
|
||||
@ -535,80 +426,13 @@ board_build.f_flash = 80000000L
|
||||
board_build.flash_mode = qio
|
||||
monitor_filters = esp32_exception_decoder
|
||||
|
||||
[env:esp32s3dev_8MB_PSRAM_qspi]
|
||||
;; ESP32-TinyS3 development board, with 8MB FLASH and PSRAM (memory_type: qio_qspi)
|
||||
extends = env:esp32s3dev_8MB_PSRAM_opi
|
||||
;board = um_tinys3 ; -> needs workaround from https://github.com/Aircoookie/WLED/pull/2905#issuecomment-1328049860
|
||||
board = esp32-s3-devkitc-1 ;; generic dev board; the next line adds PSRAM support
|
||||
board_build.arduino.memory_type = qio_qspi ;; use with PSRAM: 2MB or 4MB
|
||||
|
||||
[env:esp8285_4CH_MagicHome]
|
||||
board = esp8285
|
||||
platform = ${common.platform_wled_default}
|
||||
platform_packages = ${common.platform_packages}
|
||||
board_build.ldscript = ${common.ldscript_1m128k}
|
||||
build_unflags = ${common.build_unflags}
|
||||
build_flags = ${common.build_flags_esp8266} -D WLED_DISABLE_OTA
|
||||
lib_deps = ${esp8266.lib_deps}
|
||||
|
||||
[env:esp8285_H801]
|
||||
board = esp8285
|
||||
platform = ${common.platform_wled_default}
|
||||
platform_packages = ${common.platform_packages}
|
||||
board_build.ldscript = ${common.ldscript_1m128k}
|
||||
build_unflags = ${common.build_unflags}
|
||||
build_flags = ${common.build_flags_esp8266} -D WLED_DISABLE_OTA
|
||||
lib_deps = ${esp8266.lib_deps}
|
||||
|
||||
[env:d1_mini_5CH_Shojo_PCB]
|
||||
board = d1_mini
|
||||
platform = ${common.platform_wled_default}
|
||||
platform_packages = ${common.platform_packages}
|
||||
board_build.ldscript = ${common.ldscript_4m1m}
|
||||
build_unflags = ${common.build_unflags}
|
||||
build_flags = ${common.build_flags_esp8266} -D WLED_USE_SHOJO_PCB
|
||||
lib_deps = ${esp8266.lib_deps}
|
||||
|
||||
# ------------------------------------------------------------------------------
|
||||
# DEVELOPMENT BOARDS
|
||||
# ------------------------------------------------------------------------------
|
||||
|
||||
[env:d1_mini_debug]
|
||||
board = d1_mini
|
||||
build_type = debug
|
||||
platform = ${common.platform_wled_default}
|
||||
platform_packages = ${common.platform_packages}
|
||||
board_build.ldscript = ${common.ldscript_4m1m}
|
||||
build_unflags = ${common.build_unflags}
|
||||
build_flags = ${common.build_flags_esp8266} ${common.debug_flags}
|
||||
lib_deps = ${esp8266.lib_deps}
|
||||
|
||||
[env:d1_mini_ota]
|
||||
board = d1_mini
|
||||
upload_protocol = espota
|
||||
# exchange for your WLED IP
|
||||
upload_port = "10.10.1.27"
|
||||
platform = ${common.platform_wled_default}
|
||||
platform_packages = ${common.platform_packages}
|
||||
board_build.ldscript = ${common.ldscript_4m1m}
|
||||
build_unflags = ${common.build_unflags}
|
||||
build_flags = ${common.build_flags_esp8266}
|
||||
lib_deps = ${esp8266.lib_deps}
|
||||
|
||||
[env:anavi_miracle_controller]
|
||||
board = d1_mini
|
||||
platform = ${common.platform_wled_default}
|
||||
platform_packages = ${common.platform_packages}
|
||||
board_build.ldscript = ${common.ldscript_4m1m}
|
||||
build_unflags = ${common.build_unflags}
|
||||
build_flags = ${common.build_flags_esp8266} -D LEDPIN=12 -D IRPIN=-1 -D RLYPIN=2
|
||||
lib_deps = ${esp8266.lib_deps}
|
||||
|
||||
[env:lolin_s2_mini]
|
||||
platform = ${esp32s2.platform}
|
||||
platform_packages = ${esp32s2.platform_packages}
|
||||
board = lolin_s2_mini
|
||||
board_build.partitions = tools/WLED_ESP32_4MB_1MB_FS.csv
|
||||
board_build.flash_mode = qio
|
||||
board_build.f_flash = 80000000L
|
||||
build_unflags = ${common.build_unflags} #-DARDUINO_USB_CDC_ON_BOOT=1
|
||||
build_flags = ${common.build_flags} ${esp32s2.build_flags} -D WLED_RELEASE_NAME=ESP32-S2
|
||||
-DBOARD_HAS_PSRAM
|
||||
@ -617,7 +441,6 @@ build_flags = ${common.build_flags} ${esp32s2.build_flags} -D WLED_RELEASE_NAME=
|
||||
-DARDUINO_USB_DFU_ON_BOOT=0
|
||||
-DLOLIN_WIFI_FIX ; seems to work much better with this
|
||||
-D WLED_USE_PSRAM
|
||||
; -D WLED_USE_UNREAL_MATH ;; may cause wrong sunset/sunrise times, but saves 6792 bytes FLASH
|
||||
-D WLED_WATCHDOG_TIMEOUT=0
|
||||
-D CONFIG_ASYNC_TCP_USE_WDT=0
|
||||
-D LEDPIN=16
|
||||
@ -631,188 +454,3 @@ build_flags = ${common.build_flags} ${esp32s2.build_flags} -D WLED_RELEASE_NAME=
|
||||
-D HW_PIN_MISOSPI=9
|
||||
; -D STATUSLED=15
|
||||
lib_deps = ${esp32s2.lib_deps}
|
||||
|
||||
# ------------------------------------------------------------------------------
|
||||
# custom board configurations
|
||||
# ------------------------------------------------------------------------------
|
||||
|
||||
[env:esp32c3dev_2MB]
|
||||
;; for ESP32-C3 boards with 2MB flash (instead of 4MB).
|
||||
;; this board need a specific partition file. OTA not possible.
|
||||
extends = esp32c3
|
||||
platform = ${esp32c3.platform}
|
||||
platform_packages = ${esp32c3.platform_packages}
|
||||
board = esp32-c3-devkitm-1
|
||||
build_flags = ${common.build_flags} ${esp32c3.build_flags} #-D WLED_RELEASE_NAME=ESP32-C3
|
||||
-D WLED_WATCHDOG_TIMEOUT=0
|
||||
-D WLED_DISABLE_OTA
|
||||
; -DARDUINO_USB_CDC_ON_BOOT=1 ;; for virtual CDC USB
|
||||
-DARDUINO_USB_CDC_ON_BOOT=0 ;; for serial-to-USB chip
|
||||
build_unflags = ${common.build_unflags}
|
||||
upload_speed = 115200
|
||||
lib_deps = ${esp32c3.lib_deps}
|
||||
board_build.partitions = tools/WLED_ESP32_2MB_noOTA.csv
|
||||
board_build.flash_mode = dio
|
||||
|
||||
[env:wemos_shield_esp32]
|
||||
board = esp32dev
|
||||
platform = ${esp32.platform}
|
||||
platform_packages = ${esp32.platform_packages}
|
||||
upload_speed = 460800
|
||||
build_unflags = ${common.build_unflags}
|
||||
build_flags = ${common.build_flags_esp32}
|
||||
-D LEDPIN=16
|
||||
-D RLYPIN=19
|
||||
-D BTNPIN=17
|
||||
-D IRPIN=18
|
||||
-D UWLED_USE_MY_CONFIG
|
||||
-D USERMOD_DALLASTEMPERATURE
|
||||
-D USERMOD_FOUR_LINE_DISPLAY
|
||||
-D TEMPERATURE_PIN=23
|
||||
-D USE_ALT_DISPlAY ; new versions of USERMOD_FOUR_LINE_DISPLAY and USERMOD_ROTARY_ENCODER_UI
|
||||
-D USERMOD_AUDIOREACTIVE
|
||||
lib_deps = ${esp32.lib_deps}
|
||||
OneWire@~2.3.5
|
||||
olikraus/U8g2 @ ^2.28.8
|
||||
https://github.com/blazoncek/arduinoFFT.git
|
||||
board_build.partitions = ${esp32.default_partitions}
|
||||
|
||||
[env:m5atom]
|
||||
board = esp32dev
|
||||
build_unflags = ${common.build_unflags}
|
||||
build_flags = ${common.build_flags_esp32} -D LEDPIN=27 -D BTNPIN=39
|
||||
lib_deps = ${esp32.lib_deps}
|
||||
platform = ${esp32.platform}
|
||||
platform_packages = ${esp32.platform_packages}
|
||||
board_build.partitions = ${esp32.default_partitions}
|
||||
|
||||
[env:sp501e]
|
||||
board = esp_wroom_02
|
||||
platform = ${common.platform_wled_default}
|
||||
board_build.ldscript = ${common.ldscript_2m512k}
|
||||
build_flags = ${common.build_flags_esp8266} -D LEDPIN=3 -D BTNPIN=1
|
||||
lib_deps = ${esp8266.lib_deps}
|
||||
|
||||
[env:sp511e]
|
||||
board = esp_wroom_02
|
||||
platform = ${common.platform_wled_default}
|
||||
board_build.ldscript = ${common.ldscript_2m512k}
|
||||
build_flags = ${common.build_flags_esp8266} -D LEDPIN=3 -D BTNPIN=2 -D IRPIN=5 -D WLED_MAX_BUTTONS=3
|
||||
lib_deps = ${esp8266.lib_deps}
|
||||
|
||||
[env:Athom_RGBCW] ;7w and 5w(GU10) bulbs
|
||||
board = esp8285
|
||||
platform = ${common.platform_wled_default}
|
||||
platform_packages = ${common.platform_packages}
|
||||
board_build.ldscript = ${common.ldscript_2m512k}
|
||||
build_unflags = ${common.build_unflags}
|
||||
build_flags = ${common.build_flags_esp8266} -D WLED_RELEASE_NAME=ESP8266 -D BTNPIN=-1 -D RLYPIN=-1 -D DATA_PINS=4,12,14,13,5
|
||||
-D DEFAULT_LED_TYPE=TYPE_ANALOG_5CH -D WLED_DISABLE_INFRARED -D WLED_MAX_CCT_BLEND=0
|
||||
lib_deps = ${esp8266.lib_deps}
|
||||
|
||||
|
||||
[env:Athom_15w_RGBCW] ;15w bulb
|
||||
board = esp8285
|
||||
platform = ${common.platform_wled_default}
|
||||
platform_packages = ${common.platform_packages}
|
||||
board_build.ldscript = ${common.ldscript_2m512k}
|
||||
build_unflags = ${common.build_unflags}
|
||||
build_flags = ${common.build_flags_esp8266} -D WLED_RELEASE_NAME=ESP8266 -D BTNPIN=-1 -D RLYPIN=-1 -D DATA_PINS=4,12,14,5,13
|
||||
-D DEFAULT_LED_TYPE=TYPE_ANALOG_5CH -D WLED_DISABLE_INFRARED -D WLED_MAX_CCT_BLEND=0 -D WLED_USE_IC_CCT
|
||||
lib_deps = ${esp8266.lib_deps}
|
||||
|
||||
|
||||
[env:Athom_3Pin_Controller] ;small controller with only data
|
||||
board = esp8285
|
||||
platform = ${common.platform_wled_default}
|
||||
platform_packages = ${common.platform_packages}
|
||||
board_build.ldscript = ${common.ldscript_2m512k}
|
||||
build_unflags = ${common.build_unflags}
|
||||
build_flags = ${common.build_flags_esp8266} -D WLED_RELEASE_NAME=ESP8266 -D BTNPIN=0 -D RLYPIN=-1 -D LEDPIN=1 -D WLED_DISABLE_INFRARED
|
||||
lib_deps = ${esp8266.lib_deps}
|
||||
|
||||
|
||||
[env:Athom_4Pin_Controller] ; With clock and data interface
|
||||
board = esp8285
|
||||
platform = ${common.platform_wled_default}
|
||||
platform_packages = ${common.platform_packages}
|
||||
board_build.ldscript = ${common.ldscript_2m512k}
|
||||
build_unflags = ${common.build_unflags}
|
||||
build_flags = ${common.build_flags_esp8266} -D WLED_RELEASE_NAME=ESP8266 -D BTNPIN=0 -D RLYPIN=12 -D LEDPIN=1 -D WLED_DISABLE_INFRARED
|
||||
lib_deps = ${esp8266.lib_deps}
|
||||
|
||||
|
||||
[env:Athom_5Pin_Controller] ;Analog light strip controller
|
||||
board = esp8285
|
||||
platform = ${common.platform_wled_default}
|
||||
platform_packages = ${common.platform_packages}
|
||||
board_build.ldscript = ${common.ldscript_2m512k}
|
||||
build_unflags = ${common.build_unflags}
|
||||
build_flags = ${common.build_flags_esp8266} -D WLED_RELEASE_NAME=ESP8266 -D BTNPIN=0 -D RLYPIN=-1 DATA_PINS=4,12,14,13 -D WLED_DISABLE_INFRARED
|
||||
lib_deps = ${esp8266.lib_deps}
|
||||
|
||||
|
||||
[env:MY9291]
|
||||
board = esp01_1m
|
||||
platform = ${common.platform_wled_default}
|
||||
platform_packages = ${common.platform_packages}
|
||||
board_build.ldscript = ${common.ldscript_1m128k}
|
||||
build_unflags = ${common.build_unflags}
|
||||
build_flags = ${common.build_flags_esp8266} -D WLED_RELEASE_NAME=ESP01 -D WLED_DISABLE_OTA -D USERMOD_MY9291
|
||||
lib_deps = ${esp8266.lib_deps}
|
||||
|
||||
# ------------------------------------------------------------------------------
|
||||
# codm pixel controller board configurations
|
||||
# codm-controller-0_6 can also be used for the TYWE3S controller
|
||||
# ------------------------------------------------------------------------------
|
||||
|
||||
[env:codm-controller-0_6]
|
||||
board = esp_wroom_02
|
||||
platform = ${common.platform_wled_default}
|
||||
platform_packages = ${common.platform_packages}
|
||||
board_build.ldscript = ${common.ldscript_2m512k}
|
||||
build_unflags = ${common.build_unflags}
|
||||
build_flags = ${common.build_flags_esp8266}
|
||||
lib_deps = ${esp8266.lib_deps}
|
||||
|
||||
[env:codm-controller-0_6-rev2]
|
||||
board = esp_wroom_02
|
||||
platform = ${common.platform_wled_default}
|
||||
platform_packages = ${common.platform_packages}
|
||||
board_build.ldscript = ${common.ldscript_4m1m}
|
||||
build_unflags = ${common.build_unflags}
|
||||
build_flags = ${common.build_flags_esp8266}
|
||||
lib_deps = ${esp8266.lib_deps}
|
||||
|
||||
# ------------------------------------------------------------------------------
|
||||
# EleksTube-IPS
|
||||
# ------------------------------------------------------------------------------
|
||||
[env:elekstube_ips]
|
||||
board = esp32dev
|
||||
platform = ${esp32.platform}
|
||||
platform_packages = ${esp32.platform_packages}
|
||||
upload_speed = 921600
|
||||
build_flags = ${common.build_flags_esp32} -D WLED_DISABLE_BROWNOUT_DET -D WLED_DISABLE_INFRARED
|
||||
-D USERMOD_RTC
|
||||
-D USERMOD_ELEKSTUBE_IPS
|
||||
-D LEDPIN=12
|
||||
-D RLYPIN=27
|
||||
-D BTNPIN=34
|
||||
-D DEFAULT_LED_COUNT=6
|
||||
# Display config
|
||||
-D ST7789_DRIVER
|
||||
-D TFT_WIDTH=135
|
||||
-D TFT_HEIGHT=240
|
||||
-D CGRAM_OFFSET
|
||||
-D TFT_SDA_READ
|
||||
-D TFT_MOSI=23
|
||||
-D TFT_SCLK=18
|
||||
-D TFT_DC=25
|
||||
-D TFT_RST=26
|
||||
-D SPI_FREQUENCY=40000000
|
||||
-D USER_SETUP_LOADED
|
||||
monitor_filters = esp32_exception_decoder
|
||||
lib_deps =
|
||||
${esp32.lib_deps}
|
||||
TFT_eSPI @ ^2.3.70
|
||||
board_build.partitions = ${esp32.default_partitions}
|
||||
|
||||
@ -7,53 +7,142 @@
|
||||
[platformio]
|
||||
default_envs = WLED_tasmota_1M
|
||||
|
||||
#----------
|
||||
# SAMPLE
|
||||
#----------
|
||||
[env:WLED_tasmota_1M]
|
||||
board = esp01_1m
|
||||
platform = ${common.platform_wled_default}
|
||||
platform_packages = ${common.platform_packages}
|
||||
board_build.ldscript = ${common.ldscript_1m128k}
|
||||
; Sample libraries used for various usermods. Uncomment when using particular usermod.
|
||||
lib_deps = ${esp8266.lib_deps}
|
||||
; olikraus/U8g2 # @~2.33.15
|
||||
; paulstoffregen/OneWire@~2.3.8
|
||||
; adafruit/Adafruit Unified Sensor@^1.1.4
|
||||
; adafruit/DHT sensor library@^1.4.1
|
||||
; adafruit/Adafruit BME280 Library@^2.2.2
|
||||
; Wire
|
||||
; robtillaart/SHT85@~0.3.3
|
||||
; gmag11/QuickESPNow ;@ 0.6.2
|
||||
; https://github.com/blazoncek/QuickESPNow.git#optional-debug ;; exludes debug library
|
||||
; https://github.com/kosme/arduinoFFT#develop @ 1.9.2+sha.419d7b0 ;; used for USERMOD_AUDIOREACTIVE - using "known working" hash
|
||||
build_unflags = ${common.build_unflags}
|
||||
build_flags = ${common.build_flags_esp8266}
|
||||
; *********************************************************************
|
||||
; *** Use custom settings from file my_config.h
|
||||
-DWLED_USE_MY_CONFIG
|
||||
; *********************************************************************
|
||||
;
|
||||
;
|
||||
; *** To use the below defines/overrides, copy and paste each onto it's own line just below build_flags in the section above.
|
||||
;
|
||||
; disable specific features
|
||||
; -D WLED_DISABLE_OTA
|
||||
; -D WLED_DISABLE_ALEXA
|
||||
; -D WLED_DISABLE_HUESYNC
|
||||
; -D WLED_DISABLE_INFRARED
|
||||
; -D WLED_DISABLE_WEBSOCKETS
|
||||
; -D WLED_DISABLE_OTA
|
||||
; -D WLED_DISABLE_ALEXA
|
||||
; -D WLED_DISABLE_HUESYNC
|
||||
; -D WLED_DISABLE_LOXONE
|
||||
; -D WLED_DISABLE_INFRARED
|
||||
; -D WLED_DISABLE_WEBSOCKETS
|
||||
; -D WLED_DISABLE_MQTT
|
||||
; -D WLED_DISABLE_ADALIGHT
|
||||
; -D WLED_DISABLE_2D
|
||||
; -D WLED_DISABLE_PXMAGIC
|
||||
; -D WLED_DISABLE_ESPNOW
|
||||
; -D WLED_DISABLE_BROWNOUT_DET
|
||||
;
|
||||
; PIN defines - uncomment and change, if needed:
|
||||
; -D LEDPIN=2
|
||||
; or use this for multiple outputs
|
||||
; -D DATA_PINS=1,3
|
||||
; -D BTNPIN=0
|
||||
; -D TOUCHPIN=T0
|
||||
; -D IRPIN=4
|
||||
; -D RLYPIN=12
|
||||
; -D RLYMDE=1
|
||||
; digital LED strip types - uncomment only one ! - this will disable WS281x / SK681x support
|
||||
; -D USE_APA102
|
||||
; -D USE_WS2801
|
||||
; -D USE_LPD8806
|
||||
; PIN defines for 2 wire LEDs
|
||||
-D CLKPIN=0
|
||||
-D DATAPIN=2
|
||||
; to drive analog LED strips (aka 5050) hardware configuration is no longer necessary
|
||||
; configure the settings in the UI as follows (hard):
|
||||
; for the Magic Home LED Controller use PWM pins 5,12,13,15
|
||||
; for the H801 controller use PINs 15,13,12,14 (W2 = 04)
|
||||
; for the BW-LT11 controller use PINs 12,4,14,5
|
||||
; -D LED_BUILTIN=2 # GPIO of built-in LED
|
||||
;
|
||||
; Limit max buses
|
||||
; -D WLED_MAX_BUSSES=2
|
||||
;
|
||||
; Configure default WiFi
|
||||
; -D CLIENT_SSID='"MyNetwork"'
|
||||
; -D CLIENT_PASS='"Netw0rkPassw0rd"'
|
||||
;
|
||||
; Configure and use Ethernet
|
||||
; -D WLED_USE_ETHERNET
|
||||
; -D WLED_ETH_DEFAULT=5
|
||||
; do not use pins 5, (16,) 17, 18, 19, 21, 22, 23, 25, 26, 27 for anything but ethernet
|
||||
; -D PHY_ADDR=0 -D ETH_PHY_POWER=5 -D ETH_PHY_MDC=23 -D ETH_PHY_MDIO=18
|
||||
; -D ETH_CLK_MODE=ETH_CLOCK_GPIO17_OUT
|
||||
;
|
||||
; NTP time configuration
|
||||
; -D WLED_NTP_ENABLED=true
|
||||
; -D WLED_TIMEZONE=2
|
||||
; -D WLED_LAT=48.86
|
||||
; -D WLED_LON=2.33
|
||||
;
|
||||
; Use Watchdog timer with 10s guard
|
||||
; -D WLED_WATCHDOG_TIMEOUT=10
|
||||
;
|
||||
; Create debug build (with remote debug)
|
||||
; -D WLED_DEBUG
|
||||
; -D WLED_DEBUG_HOST='"192.168.0.100"'
|
||||
; -D WLED_DEBUG_PORT=7868
|
||||
;
|
||||
; Use Autosave usermod and set it to do save after 90s
|
||||
; -D USERMOD_AUTO_SAVE
|
||||
; -D AUTOSAVE_AFTER_SEC=90
|
||||
;
|
||||
; Use 4 Line Display usermod with SPI display
|
||||
; -D USERMOD_FOUR_LINE_DISPLAY
|
||||
; -D USE_ALT_DISPlAY # mandatory
|
||||
; -DFLD_SPI_DEFAULT
|
||||
; -D FLD_TYPE=SSD1306_SPI64
|
||||
; -D FLD_PIN_CLOCKSPI=14
|
||||
; -D FLD_PIN_DATASPI=13
|
||||
; -D FLD_PIN_DC=26
|
||||
; -D FLD_PIN_CS=15
|
||||
; -D FLD_PIN_RESET=27
|
||||
;
|
||||
; Use Rotary encoder usermod (in conjunction with 4LD)
|
||||
; -D USERMOD_ROTARY_ENCODER_UI
|
||||
; -D ENCODER_DT_PIN=5
|
||||
; -D ENCODER_CLK_PIN=18
|
||||
; -D ENCODER_SW_PIN=19
|
||||
;
|
||||
; Use Dallas DS18B20 temperature sensor usermod and configure it to use GPIO13
|
||||
; -D USERMOD_DALLASTEMPERATURE
|
||||
; -D TEMPERATURE_PIN=13
|
||||
;
|
||||
; Use Multi Relay usermod and configure it to use 6 relays and appropriate GPIO
|
||||
; -D USERMOD_MULTI_RELAY
|
||||
; -D MULTI_RELAY_MAX_RELAYS=6
|
||||
; -D MULTI_RELAY_PINS=12,23,22,21,24,25
|
||||
;
|
||||
; Use PIR sensor usermod and configure it to use GPIO4 and timer of 60s
|
||||
; -D USERMOD_PIRSWITCH
|
||||
; -D PIR_SENSOR_PIN=4
|
||||
; -D PIR_SENSOR_OFF_SEC=60
|
||||
;
|
||||
; Use Audioreactive usermod and configure I2S microphone
|
||||
; -D USERMOD_AUDIOREACTIVE
|
||||
; -D UM_AUDIOREACTIVE_USE_NEW_FFT
|
||||
; -D AUDIOPIN=-1
|
||||
; -D DMTYPE=1 # 0-analog/disabled, 1-I2S generic, 2-ES7243, 3-SPH0645, 4-I2S+mclk, 5-I2S PDM
|
||||
; -D I2S_SDPIN=36
|
||||
; -D I2S_WSPIN=23
|
||||
; -D I2S_CKPIN=19
|
||||
;
|
||||
; Use PWM fan usermod
|
||||
; -D USERMOD_PWM_FAN
|
||||
; -D TACHO_PIN=33
|
||||
; -D PWM_PIN=32
|
||||
;
|
||||
; Use built-in or custom LED as a status indicator (assumes LED is connected to GPIO16)
|
||||
; -D STATUSLED=16
|
||||
;
|
||||
; set the name of the module - make sure there is a quote-backslash-quote before the name and a backslash-quote-quote after the name
|
||||
; -D SERVERNAME="\"WLED\""
|
||||
;
|
||||
; set the number of LEDs
|
||||
; -D DEFAULT_LED_COUNT=30
|
||||
; or this for multiple outputs
|
||||
; -D PIXEL_COUNTS=30,30
|
||||
;
|
||||
; set milliampere limit when using ESP pin to power leds
|
||||
; -D ABL_MILLIAMPS_DEFAULT=850
|
||||
@ -63,3 +152,342 @@ build_flags = ${common.build_flags_esp8266}
|
||||
;
|
||||
; set default color order of your led strip
|
||||
; -D DEFAULT_LED_COLOR_ORDER=COL_ORDER_GRB
|
||||
;
|
||||
; use PSRAM if a device (ESP) has one
|
||||
; -DBOARD_HAS_PSRAM
|
||||
; -D WLED_USE_PSRAM
|
||||
;
|
||||
; configure I2C and SPI interface (for various hardware)
|
||||
; -D I2CSDAPIN=33 # initialise interface
|
||||
; -D I2CSCLPIN=35 # initialise interface
|
||||
; -D HW_PIN_SCL=35
|
||||
; -D HW_PIN_SDA=33
|
||||
; -D HW_PIN_CLOCKSPI=7
|
||||
; -D HW_PIN_DATASPI=11
|
||||
; -D HW_PIN_MISOSPI=9
|
||||
|
||||
|
||||
|
||||
# ------------------------------------------------------------------------------
|
||||
# PRE-CONFIGURED DEVELOPMENT BOARDS AND CONTROLLERS
|
||||
# ------------------------------------------------------------------------------
|
||||
|
||||
[env:esp07]
|
||||
board = esp07
|
||||
platform = ${common.platform_wled_default}
|
||||
platform_packages = ${common.platform_packages}
|
||||
board_build.ldscript = ${common.ldscript_4m1m}
|
||||
build_unflags = ${common.build_unflags}
|
||||
build_flags = ${common.build_flags_esp8266}
|
||||
lib_deps = ${esp8266.lib_deps}
|
||||
|
||||
[env:d1_mini]
|
||||
board = d1_mini
|
||||
platform = ${common.platform_wled_default}
|
||||
platform_packages = ${common.platform_packages}
|
||||
upload_speed = 921600
|
||||
board_build.ldscript = ${common.ldscript_4m1m}
|
||||
build_unflags = ${common.build_unflags}
|
||||
build_flags = ${common.build_flags_esp8266}
|
||||
lib_deps = ${esp8266.lib_deps}
|
||||
monitor_filters = esp8266_exception_decoder
|
||||
|
||||
[env:heltec_wifi_kit_8]
|
||||
board = d1_mini
|
||||
platform = ${common.platform_wled_default}
|
||||
platform_packages = ${common.platform_packages}
|
||||
board_build.ldscript = ${common.ldscript_4m1m}
|
||||
build_unflags = ${common.build_unflags}
|
||||
build_flags = ${common.build_flags_esp8266}
|
||||
lib_deps = ${esp8266.lib_deps}
|
||||
|
||||
[env:h803wf]
|
||||
board = d1_mini
|
||||
platform = ${common.platform_wled_default}
|
||||
platform_packages = ${common.platform_packages}
|
||||
board_build.ldscript = ${common.ldscript_4m1m}
|
||||
build_unflags = ${common.build_unflags}
|
||||
build_flags = ${common.build_flags_esp8266} -D LEDPIN=1 -D WLED_DISABLE_INFRARED
|
||||
lib_deps = ${esp8266.lib_deps}
|
||||
|
||||
[env:esp32dev_qio80]
|
||||
board = esp32dev
|
||||
platform = ${esp32.platform}
|
||||
platform_packages = ${esp32.platform_packages}
|
||||
build_unflags = ${common.build_unflags}
|
||||
build_flags = ${common.build_flags_esp32} -D WLED_RELEASE_NAME=ESP32_qio80 #-D WLED_DISABLE_BROWNOUT_DET
|
||||
lib_deps = ${esp32.lib_deps}
|
||||
monitor_filters = esp32_exception_decoder
|
||||
board_build.partitions = ${esp32.default_partitions}
|
||||
board_build.f_flash = 80000000L
|
||||
board_build.flash_mode = qio
|
||||
|
||||
[env:esp32dev_V4_dio80]
|
||||
;; experimental ESP32 env using ESP-IDF V4.4.x
|
||||
;; Warning: this build environment is not stable!!
|
||||
;; please erase your device before installing.
|
||||
board = esp32dev
|
||||
platform = ${esp32_idf_V4.platform}
|
||||
platform_packages = ${esp32_idf_V4.platform_packages}
|
||||
build_unflags = ${common.build_unflags}
|
||||
build_flags = ${common.build_flags} ${esp32_idf_V4.build_flags} -D WLED_RELEASE_NAME=ESP32_V4_qio80 #-D WLED_DISABLE_BROWNOUT_DET
|
||||
lib_deps = ${esp32_idf_V4.lib_deps}
|
||||
monitor_filters = esp32_exception_decoder
|
||||
board_build.partitions = ${esp32_idf_V4.default_partitions}
|
||||
board_build.f_flash = 80000000L
|
||||
board_build.flash_mode = dio
|
||||
|
||||
[env:esp32s2_saola]
|
||||
board = esp32-s2-saola-1
|
||||
platform = https://github.com/tasmota/platform-espressif32/releases/download/v2.0.2.2/platform-tasmota-espressif32-2.0.2.zip
|
||||
platform_packages =
|
||||
framework = arduino
|
||||
board_build.partitions = tools/WLED_ESP32_4MB_1MB_FS.csv
|
||||
board_build.flash_mode = qio
|
||||
upload_speed = 460800
|
||||
build_unflags = ${common.build_unflags}
|
||||
build_flags = ${common.build_flags} ${esp32s2.build_flags} #-D WLED_RELEASE_NAME=S2_saola
|
||||
;-DLOLIN_WIFI_FIX ;; try this in case Wifi does not work
|
||||
-DARDUINO_USB_CDC_ON_BOOT=1
|
||||
lib_deps = ${esp32s2.lib_deps}
|
||||
|
||||
[env:esp32s3dev_8MB_PSRAM_qspi]
|
||||
;; ESP32-TinyS3 development board, with 8MB FLASH and PSRAM (memory_type: qio_qspi)
|
||||
extends = env:esp32s3dev_8MB_PSRAM_opi
|
||||
;board = um_tinys3 ; -> needs workaround from https://github.com/Aircoookie/WLED/pull/2905#issuecomment-1328049860
|
||||
board = esp32-s3-devkitc-1 ;; generic dev board; the next line adds PSRAM support
|
||||
board_build.arduino.memory_type = qio_qspi ;; use with PSRAM: 2MB or 4MB
|
||||
|
||||
[env:esp8285_4CH_MagicHome]
|
||||
board = esp8285
|
||||
platform = ${common.platform_wled_default}
|
||||
platform_packages = ${common.platform_packages}
|
||||
board_build.ldscript = ${common.ldscript_1m128k}
|
||||
build_unflags = ${common.build_unflags}
|
||||
build_flags = ${common.build_flags_esp8266} -D WLED_DISABLE_OTA
|
||||
lib_deps = ${esp8266.lib_deps}
|
||||
|
||||
[env:esp8285_H801]
|
||||
board = esp8285
|
||||
platform = ${common.platform_wled_default}
|
||||
platform_packages = ${common.platform_packages}
|
||||
board_build.ldscript = ${common.ldscript_1m128k}
|
||||
build_unflags = ${common.build_unflags}
|
||||
build_flags = ${common.build_flags_esp8266} -D WLED_DISABLE_OTA
|
||||
lib_deps = ${esp8266.lib_deps}
|
||||
|
||||
[env:d1_mini_5CH_Shojo_PCB]
|
||||
board = d1_mini
|
||||
platform = ${common.platform_wled_default}
|
||||
platform_packages = ${common.platform_packages}
|
||||
board_build.ldscript = ${common.ldscript_4m1m}
|
||||
build_unflags = ${common.build_unflags}
|
||||
build_flags = ${common.build_flags_esp8266} -D WLED_USE_SHOJO_PCB
|
||||
lib_deps = ${esp8266.lib_deps}
|
||||
|
||||
[env:d1_mini_debug]
|
||||
board = d1_mini
|
||||
build_type = debug
|
||||
platform = ${common.platform_wled_default}
|
||||
platform_packages = ${common.platform_packages}
|
||||
board_build.ldscript = ${common.ldscript_4m1m}
|
||||
build_unflags = ${common.build_unflags}
|
||||
build_flags = ${common.build_flags_esp8266} ${common.debug_flags}
|
||||
lib_deps = ${esp8266.lib_deps}
|
||||
|
||||
[env:d1_mini_ota]
|
||||
board = d1_mini
|
||||
upload_protocol = espota
|
||||
# exchange for your WLED IP
|
||||
upload_port = "10.10.1.27"
|
||||
platform = ${common.platform_wled_default}
|
||||
platform_packages = ${common.platform_packages}
|
||||
board_build.ldscript = ${common.ldscript_4m1m}
|
||||
build_unflags = ${common.build_unflags}
|
||||
build_flags = ${common.build_flags_esp8266}
|
||||
lib_deps = ${esp8266.lib_deps}
|
||||
|
||||
[env:anavi_miracle_controller]
|
||||
board = d1_mini
|
||||
platform = ${common.platform_wled_default}
|
||||
platform_packages = ${common.platform_packages}
|
||||
board_build.ldscript = ${common.ldscript_4m1m}
|
||||
build_unflags = ${common.build_unflags}
|
||||
build_flags = ${common.build_flags_esp8266} -D LEDPIN=12 -D IRPIN=-1 -D RLYPIN=2
|
||||
lib_deps = ${esp8266.lib_deps}
|
||||
|
||||
[env:esp32c3dev_2MB]
|
||||
;; for ESP32-C3 boards with 2MB flash (instead of 4MB).
|
||||
;; this board need a specific partition file. OTA not possible.
|
||||
extends = esp32c3
|
||||
platform = ${esp32c3.platform}
|
||||
platform_packages = ${esp32c3.platform_packages}
|
||||
board = esp32-c3-devkitm-1
|
||||
build_flags = ${common.build_flags} ${esp32c3.build_flags} #-D WLED_RELEASE_NAME=ESP32-C3
|
||||
-D WLED_WATCHDOG_TIMEOUT=0
|
||||
-D WLED_DISABLE_OTA
|
||||
; -DARDUINO_USB_CDC_ON_BOOT=1 ;; for virtual CDC USB
|
||||
-DARDUINO_USB_CDC_ON_BOOT=0 ;; for serial-to-USB chip
|
||||
build_unflags = ${common.build_unflags}
|
||||
upload_speed = 115200
|
||||
lib_deps = ${esp32c3.lib_deps}
|
||||
board_build.partitions = tools/WLED_ESP32_2MB_noOTA.csv
|
||||
board_build.flash_mode = dio
|
||||
|
||||
[env:wemos_shield_esp32]
|
||||
board = esp32dev
|
||||
platform = ${esp32.platform}
|
||||
platform_packages = ${esp32.platform_packages}
|
||||
upload_speed = 460800
|
||||
build_unflags = ${common.build_unflags}
|
||||
build_flags = ${common.build_flags_esp32}
|
||||
-D LEDPIN=16
|
||||
-D RLYPIN=19
|
||||
-D BTNPIN=17
|
||||
-D IRPIN=18
|
||||
-D UWLED_USE_MY_CONFIG
|
||||
-D USERMOD_DALLASTEMPERATURE
|
||||
-D USERMOD_FOUR_LINE_DISPLAY
|
||||
-D TEMPERATURE_PIN=23
|
||||
-D USE_ALT_DISPlAY ; new versions of USERMOD_FOUR_LINE_DISPLAY and USERMOD_ROTARY_ENCODER_UI
|
||||
-D USERMOD_AUDIOREACTIVE
|
||||
lib_deps = ${esp32.lib_deps}
|
||||
OneWire@~2.3.5
|
||||
olikraus/U8g2 @ ^2.28.8
|
||||
https://github.com/blazoncek/arduinoFFT.git
|
||||
board_build.partitions = ${esp32.default_partitions}
|
||||
|
||||
[env:m5atom]
|
||||
board = esp32dev
|
||||
build_unflags = ${common.build_unflags}
|
||||
build_flags = ${common.build_flags_esp32} -D LEDPIN=27 -D BTNPIN=39
|
||||
lib_deps = ${esp32.lib_deps}
|
||||
platform = ${esp32.platform}
|
||||
platform_packages = ${esp32.platform_packages}
|
||||
board_build.partitions = ${esp32.default_partitions}
|
||||
|
||||
[env:sp501e]
|
||||
board = esp_wroom_02
|
||||
platform = ${common.platform_wled_default}
|
||||
board_build.ldscript = ${common.ldscript_2m512k}
|
||||
build_flags = ${common.build_flags_esp8266} -D LEDPIN=3 -D BTNPIN=1
|
||||
lib_deps = ${esp8266.lib_deps}
|
||||
|
||||
[env:sp511e]
|
||||
board = esp_wroom_02
|
||||
platform = ${common.platform_wled_default}
|
||||
board_build.ldscript = ${common.ldscript_2m512k}
|
||||
build_flags = ${common.build_flags_esp8266} -D LEDPIN=3 -D BTNPIN=2 -D IRPIN=5 -D WLED_MAX_BUTTONS=3
|
||||
lib_deps = ${esp8266.lib_deps}
|
||||
|
||||
[env:Athom_RGBCW] ;7w and 5w(GU10) bulbs
|
||||
board = esp8285
|
||||
platform = ${common.platform_wled_default}
|
||||
platform_packages = ${common.platform_packages}
|
||||
board_build.ldscript = ${common.ldscript_2m512k}
|
||||
build_unflags = ${common.build_unflags}
|
||||
build_flags = ${common.build_flags_esp8266} -D WLED_RELEASE_NAME=ESP8266 -D BTNPIN=-1 -D RLYPIN=-1 -D DATA_PINS=4,12,14,13,5
|
||||
-D DEFAULT_LED_TYPE=TYPE_ANALOG_5CH -D WLED_DISABLE_INFRARED -D WLED_MAX_CCT_BLEND=0
|
||||
lib_deps = ${esp8266.lib_deps}
|
||||
|
||||
[env:Athom_15w_RGBCW] ;15w bulb
|
||||
board = esp8285
|
||||
platform = ${common.platform_wled_default}
|
||||
platform_packages = ${common.platform_packages}
|
||||
board_build.ldscript = ${common.ldscript_2m512k}
|
||||
build_unflags = ${common.build_unflags}
|
||||
build_flags = ${common.build_flags_esp8266} -D WLED_RELEASE_NAME=ESP8266 -D BTNPIN=-1 -D RLYPIN=-1 -D DATA_PINS=4,12,14,5,13
|
||||
-D DEFAULT_LED_TYPE=TYPE_ANALOG_5CH -D WLED_DISABLE_INFRARED -D WLED_MAX_CCT_BLEND=0 -D WLED_USE_IC_CCT
|
||||
lib_deps = ${esp8266.lib_deps}
|
||||
|
||||
[env:Athom_3Pin_Controller] ;small controller with only data
|
||||
board = esp8285
|
||||
platform = ${common.platform_wled_default}
|
||||
platform_packages = ${common.platform_packages}
|
||||
board_build.ldscript = ${common.ldscript_2m512k}
|
||||
build_unflags = ${common.build_unflags}
|
||||
build_flags = ${common.build_flags_esp8266} -D WLED_RELEASE_NAME=ESP8266 -D BTNPIN=0 -D RLYPIN=-1 -D LEDPIN=1 -D WLED_DISABLE_INFRARED
|
||||
lib_deps = ${esp8266.lib_deps}
|
||||
|
||||
[env:Athom_4Pin_Controller] ; With clock and data interface
|
||||
board = esp8285
|
||||
platform = ${common.platform_wled_default}
|
||||
platform_packages = ${common.platform_packages}
|
||||
board_build.ldscript = ${common.ldscript_2m512k}
|
||||
build_unflags = ${common.build_unflags}
|
||||
build_flags = ${common.build_flags_esp8266} -D WLED_RELEASE_NAME=ESP8266 -D BTNPIN=0 -D RLYPIN=12 -D LEDPIN=1 -D WLED_DISABLE_INFRARED
|
||||
lib_deps = ${esp8266.lib_deps}
|
||||
|
||||
[env:Athom_5Pin_Controller] ;Analog light strip controller
|
||||
board = esp8285
|
||||
platform = ${common.platform_wled_default}
|
||||
platform_packages = ${common.platform_packages}
|
||||
board_build.ldscript = ${common.ldscript_2m512k}
|
||||
build_unflags = ${common.build_unflags}
|
||||
build_flags = ${common.build_flags_esp8266} -D WLED_RELEASE_NAME=ESP8266 -D BTNPIN=0 -D RLYPIN=-1 DATA_PINS=4,12,14,13 -D WLED_DISABLE_INFRARED
|
||||
lib_deps = ${esp8266.lib_deps}
|
||||
|
||||
[env:MY9291]
|
||||
board = esp01_1m
|
||||
platform = ${common.platform_wled_default}
|
||||
platform_packages = ${common.platform_packages}
|
||||
board_build.ldscript = ${common.ldscript_1m128k}
|
||||
build_unflags = ${common.build_unflags}
|
||||
build_flags = ${common.build_flags_esp8266} -D WLED_RELEASE_NAME=ESP01 -D WLED_DISABLE_OTA -D USERMOD_MY9291
|
||||
lib_deps = ${esp8266.lib_deps}
|
||||
|
||||
# ------------------------------------------------------------------------------
|
||||
# codm pixel controller board configurations
|
||||
# codm-controller-0_6 can also be used for the TYWE3S controller
|
||||
# ------------------------------------------------------------------------------
|
||||
|
||||
[env:codm-controller-0_6]
|
||||
board = esp_wroom_02
|
||||
platform = ${common.platform_wled_default}
|
||||
platform_packages = ${common.platform_packages}
|
||||
board_build.ldscript = ${common.ldscript_2m512k}
|
||||
build_unflags = ${common.build_unflags}
|
||||
build_flags = ${common.build_flags_esp8266}
|
||||
lib_deps = ${esp8266.lib_deps}
|
||||
|
||||
[env:codm-controller-0_6-rev2]
|
||||
board = esp_wroom_02
|
||||
platform = ${common.platform_wled_default}
|
||||
platform_packages = ${common.platform_packages}
|
||||
board_build.ldscript = ${common.ldscript_4m1m}
|
||||
build_unflags = ${common.build_unflags}
|
||||
build_flags = ${common.build_flags_esp8266}
|
||||
lib_deps = ${esp8266.lib_deps}
|
||||
|
||||
# ------------------------------------------------------------------------------
|
||||
# EleksTube-IPS
|
||||
# ------------------------------------------------------------------------------
|
||||
[env:elekstube_ips]
|
||||
board = esp32dev
|
||||
platform = ${esp32.platform}
|
||||
platform_packages = ${esp32.platform_packages}
|
||||
upload_speed = 921600
|
||||
build_flags = ${common.build_flags_esp32} -D WLED_DISABLE_BROWNOUT_DET -D WLED_DISABLE_INFRARED
|
||||
-D USERMOD_RTC
|
||||
-D USERMOD_ELEKSTUBE_IPS
|
||||
-D LEDPIN=12
|
||||
-D RLYPIN=27
|
||||
-D BTNPIN=34
|
||||
-D DEFAULT_LED_COUNT=6
|
||||
# Display config
|
||||
-D ST7789_DRIVER
|
||||
-D TFT_WIDTH=135
|
||||
-D TFT_HEIGHT=240
|
||||
-D CGRAM_OFFSET
|
||||
-D TFT_SDA_READ
|
||||
-D TFT_MOSI=23
|
||||
-D TFT_SCLK=18
|
||||
-D TFT_DC=25
|
||||
-D TFT_RST=26
|
||||
-D SPI_FREQUENCY=40000000
|
||||
-D USER_SETUP_LOADED
|
||||
monitor_filters = esp32_exception_decoder
|
||||
lib_deps =
|
||||
${esp32.lib_deps}
|
||||
TFT_eSPI @ ^2.3.70
|
||||
board_build.partitions = ${esp32.default_partitions}
|
||||
|
||||
Loading…
x
Reference in New Issue
Block a user