Format changes.

.clang-format

@@ -1,4 +1,12 @@
 ---
   BasedOnStyle: Webkit
   IndentWidth: 2
-  
+  AlignTrailingComments: true 
+  SpacesBeforeTrailingComments: 8
+  AllowShortIfStatementsOnASingleLine: Always
+  AllowShortLoopsOnASingleLine: true
+  AllowShortLambdasOnASingleLine: true
+  AllowShortCaseLabelsOnASingleLine: true
+  AllowShortFunctionsOnASingleLine: All
+  AllowShortBlocksOnASingleLine: true
+  IndentCaseLabels: true

wled00/wled.cpp

@@ -18,224 +18,224 @@
 // Global Variable definitions
 char versionString[] = "0.9.1";
 
-//AP and OTA default passwords (for maximum change them!)
+// AP and OTA default passwords (for maximum change them!)
 char apPass[65] = DEFAULT_AP_PASS;
 char otaPass[33] = DEFAULT_OTA_PASS;
 
-//Hardware CONFIG (only changeble HERE, not at runtime)
+// Hardware CONFIG (only changeble HERE, not at runtime)
-//LED strip pin, button pin and IR pin changeable in NpbWrapper.h!
+// LED strip pin, button pin and IR pin changeable in NpbWrapper.h!
 
-byte auxDefaultState = 0; //0: input 1: high 2: low
+byte auxDefaultState = 0;                              // 0: input 1: high 2: low
-byte auxTriggeredState = 0; //0: input 1: high 2: low
+byte auxTriggeredState = 0;                            // 0: input 1: high 2: low
-char ntpServerName[33] = "0.wled.pool.ntp.org"; //NTP server to use
+char ntpServerName[33] = "0.wled.pool.ntp.org";        // NTP server to use
 
-//WiFi CONFIG (all these can be changed via web UI, no need to set them here)
+// WiFi CONFIG (all these can be changed via web UI, no need to set them here)
 char clientSSID[33] = CLIENT_SSID;
 char clientPass[65] = CLIENT_PASS;
-char cmDNS[33] = "x"; //mDNS address (placeholder, will be replaced by wledXXXXXXXXXXXX.local)
+char cmDNS[33] = "x";                              // mDNS address (placeholder, will be replaced by wledXXXXXXXXXXXX.local)
-char apSSID[33] = ""; //AP off by default (unless setup)
+char apSSID[33] = "";                              // AP off by default (unless setup)
-byte apChannel = 1; //2.4GHz WiFi AP channel (1-13)
+byte apChannel = 1;                                // 2.4GHz WiFi AP channel (1-13)
-byte apHide = 0; //hidden AP SSID
+byte apHide = 0;                                   // hidden AP SSID
-byte apBehavior = AP_BEHAVIOR_BOOT_NO_CONN; //access point opens when no connection after boot by default
+byte apBehavior = AP_BEHAVIOR_BOOT_NO_CONN;        // access point opens when no connection after boot by default
-IPAddress staticIP(0, 0, 0, 0); //static IP of ESP
+IPAddress staticIP(0, 0, 0, 0);                    // static IP of ESP
-IPAddress staticGateway(0, 0, 0, 0); //gateway (router) IP
+IPAddress staticGateway(0, 0, 0, 0);               // gateway (router) IP
-IPAddress staticSubnet(255, 255, 255, 0); //most common subnet in home networks
+IPAddress staticSubnet(255, 255, 255, 0);          // most common subnet in home networks
-bool noWifiSleep = false; //disabling modem sleep modes will increase heat output and power usage, but may help with connection issues
+bool noWifiSleep = false;                          // disabling modem sleep modes will increase heat output and power usage, but may help with connection issues
 
-//LED CONFIG
+// LED CONFIG
-uint16_t ledCount = 30; //overcurrent prevented by ABL
+uint16_t ledCount = 30;          // overcurrent prevented by ABL
-bool useRGBW = false; //SK6812 strips can contain an extra White channel
+bool useRGBW = false;            // SK6812 strips can contain an extra White channel
-bool turnOnAtBoot = true; //turn on LEDs at power-up
+bool turnOnAtBoot = true;        // turn on LEDs at power-up
-byte bootPreset = 0; //save preset to load after power-up
+byte bootPreset = 0;             // save preset to load after power-up
 
-byte col[] { 255, 160, 0, 0 }; //current RGB(W) primary color. col[] should be updated if you want to change the color.
+byte col[] { 255, 160, 0, 0 };        // current RGB(W) primary color. col[] should be updated if you want to change the color.
-byte colSec[] { 0, 0, 0, 0 }; //current RGB(W) secondary color
+byte colSec[] { 0, 0, 0, 0 };         // current RGB(W) secondary color
-byte briS = 128; //default brightness
+byte briS = 128;                      // default brightness
 
-byte nightlightTargetBri = 0; //brightness after nightlight is over
+byte nightlightTargetBri = 0;        // brightness after nightlight is over
 byte nightlightDelayMins = 60;
-bool nightlightFade = true; //if enabled, light will gradually dim towards the target bri. Otherwise, it will instantly set after delay over
+bool nightlightFade = true;              // if enabled, light will gradually dim towards the target bri. Otherwise, it will instantly set after delay over
-bool nightlightColorFade = false; //if enabled, light will gradually fade color from primary to secondary color.
+bool nightlightColorFade = false;        // if enabled, light will gradually fade color from primary to secondary color.
-bool fadeTransition = true; //enable crossfading color transition
+bool fadeTransition = true;              // enable crossfading color transition
-uint16_t transitionDelay = 750; //default crossfade duration in ms
+uint16_t transitionDelay = 750;          // default crossfade duration in ms
 
-bool skipFirstLed = false; //ignore first LED in strip (useful if you need the LED as signal repeater)
+bool skipFirstLed = false;        // ignore first LED in strip (useful if you need the LED as signal repeater)
-byte briMultiplier = 100; //% of brightness to set (to limit power, if you set it to 50 and set bri to 255, actual brightness will be 127)
+byte briMultiplier = 100;         // % of brightness to set (to limit power, if you set it to 50 and set bri to 255, actual brightness will be 127)
 
-//User Interface CONFIG
+// User Interface CONFIG
-char serverDescription[33] = "WLED"; //Name of module
+char serverDescription[33] = "WLED";        // Name of module
-bool syncToggleReceive = false; //UIs which only have a single button for sync should toggle send+receive if this is true, only send otherwise
+bool syncToggleReceive = false;             // UIs which only have a single button for sync should toggle send+receive if this is true, only send otherwise
 
-//Sync CONFIG
+// Sync CONFIG
 bool buttonEnabled = true;
-byte irEnabled = 0; //Infrared receiver
+byte irEnabled = 0;        // Infrared receiver
 
-uint16_t udpPort = 21324; //WLED notifier default port
+uint16_t udpPort = 21324;           // WLED notifier default port
-uint16_t udpRgbPort = 19446; //Hyperion port
+uint16_t udpRgbPort = 19446;        // Hyperion port
 
-bool receiveNotificationBrightness = true; //apply brightness from incoming notifications
+bool receiveNotificationBrightness = true;        // apply brightness from incoming notifications
-bool receiveNotificationColor = true; //apply color
+bool receiveNotificationColor = true;             // apply color
-bool receiveNotificationEffects = true; //apply effects setup
+bool receiveNotificationEffects = true;           // apply effects setup
-bool notifyDirect = false; //send notification if change via UI or HTTP API
+bool notifyDirect = false;                        // send notification if change via UI or HTTP API
-bool notifyButton = false; //send if updated by button or infrared remote
+bool notifyButton = false;                        // send if updated by button or infrared remote
-bool notifyAlexa = false; //send notification if updated via Alexa
+bool notifyAlexa = false;                         // send notification if updated via Alexa
-bool notifyMacro = false; //send notification for macro
+bool notifyMacro = false;                         // send notification for macro
-bool notifyHue = true; //send notification if Hue light changes
+bool notifyHue = true;                            // send notification if Hue light changes
-bool notifyTwice = false; //notifications use UDP: enable if devices don't sync reliably
+bool notifyTwice = false;                         // notifications use UDP: enable if devices don't sync reliably
 
-bool alexaEnabled = true; //enable device discovery by Amazon Echo
+bool alexaEnabled = true;                      // enable device discovery by Amazon Echo
-char alexaInvocationName[33] = "Light"; //speech control name of device. Choose something voice-to-text can understand
+char alexaInvocationName[33] = "Light";        // speech control name of device. Choose something voice-to-text can understand
 
-char blynkApiKey[36] = ""; //Auth token for Blynk server. If empty, no connection will be made
+char blynkApiKey[36] = "";        // Auth token for Blynk server. If empty, no connection will be made
 
-uint16_t realtimeTimeoutMs = 2500; //ms timeout of realtime mode before returning to normal mode
+uint16_t realtimeTimeoutMs = 2500;             // ms timeout of realtime mode before returning to normal mode
-int arlsOffset = 0; //realtime LED offset
+int arlsOffset = 0;                            // realtime LED offset
-bool receiveDirect = true; //receive UDP realtime
+bool receiveDirect = true;                     // receive UDP realtime
-bool arlsDisableGammaCorrection = true; //activate if gamma correction is handled by the source
+bool arlsDisableGammaCorrection = true;        // activate if gamma correction is handled by the source
-bool arlsForceMaxBri = false; //enable to force max brightness if source has very dark colors that would be black
+bool arlsForceMaxBri = false;                  // enable to force max brightness if source has very dark colors that would be black
 
-uint16_t e131Universe = 1; //settings for E1.31 (sACN) protocol (only DMX_MODE_MULTIPLE_* can span over consequtive universes)
+uint16_t e131Universe = 1;                                      // settings for E1.31 (sACN) protocol (only DMX_MODE_MULTIPLE_* can span over consequtive universes)
-uint8_t DMXMode = DMX_MODE_MULTIPLE_RGB; //DMX mode (s.a.)
+uint8_t DMXMode = DMX_MODE_MULTIPLE_RGB;                        // DMX mode (s.a.)
-uint16_t DMXAddress = 1; //DMX start address of fixture, a.k.a. first Channel [for E1.31 (sACN) protocol]
+uint16_t DMXAddress = 1;                                        // DMX start address of fixture, a.k.a. first Channel [for E1.31 (sACN) protocol]
-uint8_t DMXOldDimmer = 0; //only update brightness on change
+uint8_t DMXOldDimmer = 0;                                       // only update brightness on change
-uint8_t e131LastSequenceNumber[E131_MAX_UNIVERSE_COUNT]; //to detect packet loss
+uint8_t e131LastSequenceNumber[E131_MAX_UNIVERSE_COUNT];        // to detect packet loss
-bool e131Multicast = false; //multicast or unicast
+bool e131Multicast = false;                                     // multicast or unicast
-bool e131SkipOutOfSequence = false; //freeze instead of flickering
+bool e131SkipOutOfSequence = false;                             // freeze instead of flickering
 
 bool mqttEnabled = false;
-char mqttDeviceTopic[33] = ""; //main MQTT topic (individual per device, default is wled/mac)
+char mqttDeviceTopic[33] = "";               // main MQTT topic (individual per device, default is wled/mac)
-char mqttGroupTopic[33] = "wled/all"; //second MQTT topic (for example to group devices)
+char mqttGroupTopic[33] = "wled/all";        // second MQTT topic (for example to group devices)
-char mqttServer[33] = ""; //both domains and IPs should work (no SSL)
+char mqttServer[33] = "";                    // both domains and IPs should work (no SSL)
-char mqttUser[41] = ""; //optional: username for MQTT auth
+char mqttUser[41] = "";                      // optional: username for MQTT auth
-char mqttPass[41] = ""; //optional: password for MQTT auth
+char mqttPass[41] = "";                      // optional: password for MQTT auth
-char mqttClientID[41] = ""; //override the client ID
+char mqttClientID[41] = "";                  // override the client ID
 uint16_t mqttPort = 1883;
 
-bool huePollingEnabled = false; //poll hue bridge for light state
+bool huePollingEnabled = false;           // poll hue bridge for light state
-uint16_t huePollIntervalMs = 2500; //low values (< 1sec) may cause lag but offer quicker response
+uint16_t huePollIntervalMs = 2500;        // low values (< 1sec) may cause lag but offer quicker response
-char hueApiKey[47] = "api"; //key token will be obtained from bridge
+char hueApiKey[47] = "api";               // key token will be obtained from bridge
-byte huePollLightId = 1; //ID of hue lamp to sync to. Find the ID in the hue app ("about" section)
+byte huePollLightId = 1;                  // ID of hue lamp to sync to. Find the ID in the hue app ("about" section)
-IPAddress hueIP = (0, 0, 0, 0); //IP address of the bridge
+IPAddress hueIP = (0, 0, 0, 0);           // IP address of the bridge
 bool hueApplyOnOff = true;
 bool hueApplyBri = true;
 bool hueApplyColor = true;
 
-//Time CONFIG
+// Time CONFIG
-bool ntpEnabled = false; //get internet time. Only required if you use clock overlays or time-activated macros
+bool ntpEnabled = false;         // get internet time. Only required if you use clock overlays or time-activated macros
-bool useAMPM = false; //12h/24h clock format
+bool useAMPM = false;            // 12h/24h clock format
-byte currentTimezone = 0; //Timezone ID. Refer to timezones array in wled10_ntp.ino
+byte currentTimezone = 0;        // Timezone ID. Refer to timezones array in wled10_ntp.ino
-int utcOffsetSecs = 0; //Seconds to offset from UTC before timzone calculation
+int utcOffsetSecs = 0;           // Seconds to offset from UTC before timzone calculation
 
-byte overlayDefault = 0; //0: no overlay 1: analog clock 2: single-digit clocl 3: cronixie
+byte overlayDefault = 0;                               // 0: no overlay 1: analog clock 2: single-digit clocl 3: cronixie
-byte overlayMin = 0, overlayMax = ledCount - 1; //boundaries of overlay mode
+byte overlayMin = 0, overlayMax = ledCount - 1;        // boundaries of overlay mode
 
-byte analogClock12pixel = 0; //The pixel in your strip where "midnight" would be
+byte analogClock12pixel = 0;                 // The pixel in your strip where "midnight" would be
-bool analogClockSecondsTrail = false; //Display seconds as trail of LEDs instead of a single pixel
+bool analogClockSecondsTrail = false;        // Display seconds as trail of LEDs instead of a single pixel
-bool analogClock5MinuteMarks = false; //Light pixels at every 5-minute position
+bool analogClock5MinuteMarks = false;        // Light pixels at every 5-minute position
 
-char cronixieDisplay[7] = "HHMMSS"; //Cronixie Display mask. See wled13_cronixie.ino
+char cronixieDisplay[7] = "HHMMSS";        // Cronixie Display mask. See wled13_cronixie.ino
-bool cronixieBacklight = true; //Allow digits to be back-illuminated
+bool cronixieBacklight = true;             // Allow digits to be back-illuminated
 
-bool countdownMode = false; //Clock will count down towards date
+bool countdownMode = false;                         // Clock will count down towards date
-byte countdownYear = 20, countdownMonth = 1; //Countdown target date, year is last two digits
+byte countdownYear = 20, countdownMonth = 1;        // Countdown target date, year is last two digits
 byte countdownDay = 1, countdownHour = 0;
 byte countdownMin = 0, countdownSec = 0;
 
-byte macroBoot = 0; //macro loaded after startup
+byte macroBoot = 0;        // macro loaded after startup
-byte macroNl = 0; //after nightlight delay over
+byte macroNl = 0;          // after nightlight delay over
 byte macroCountdown = 0;
 byte macroAlexaOn = 0, macroAlexaOff = 0;
 byte macroButton = 0, macroLongPress = 0, macroDoublePress = 0;
 
-//Security CONFIG
+// Security CONFIG
-bool otaLock = false; //prevents OTA firmware updates without password. ALWAYS enable if system exposed to any public networks
+bool otaLock = false;           // prevents OTA firmware updates without password. ALWAYS enable if system exposed to any public networks
-bool wifiLock = false; //prevents access to WiFi settings when OTA lock is enabled
+bool wifiLock = false;          // prevents access to WiFi settings when OTA lock is enabled
-bool aOtaEnabled = true; //ArduinoOTA allows easy updates directly from the IDE. Careful, it does not auto-disable when OTA lock is on
+bool aOtaEnabled = true;        // ArduinoOTA allows easy updates directly from the IDE. Careful, it does not auto-disable when OTA lock is on
 
 uint16_t userVar0 = 0, userVar1 = 0;
 
 #ifdef WLED_ENABLE_DMX
-//dmx CONFIG
+  // dmx CONFIG
-byte DMXChannels = 7; // number of channels per fixture
+  byte DMXChannels = 7;        // number of channels per fixture
-byte DMXFixtureMap[15] = { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 };
+  byte DMXFixtureMap[15] = { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 };
-// assigns the different channels to different functions. See wled21_dmx.ino for more information.
+  // assigns the different channels to different functions. See wled21_dmx.ino for more information.
-uint16_t DMXGap = 10; // gap between the fixtures. makes addressing easier because you don't have to memorize odd numbers when climbing up onto a rig.
+  uint16_t DMXGap = 10;          // gap between the fixtures. makes addressing easier because you don't have to memorize odd numbers when climbing up onto a rig.
-uint16_t DMXStart = 10; // start address of the first fixture
+  uint16_t DMXStart = 10;        // start address of the first fixture
 #endif
 
-//internal global variable declarations
+// internal global variable declarations
-//wifi
+// wifi
 bool apActive = false;
 bool forceReconnect = false;
 uint32_t lastReconnectAttempt = 0;
 bool interfacesInited = false;
 bool wasConnected = false;
 
-//color
+// color
-byte colOld[] { 0, 0, 0, 0 }; //color before transition
+byte colOld[] { 0, 0, 0, 0 };        // color before transition
-byte colT[] { 0, 0, 0, 0 }; //color that is currently displayed on the LEDs
+byte colT[] { 0, 0, 0, 0 };          // color that is currently displayed on the LEDs
-byte colIT[] { 0, 0, 0, 0 }; //color that was last sent to LEDs
+byte colIT[] { 0, 0, 0, 0 };         // color that was last sent to LEDs
 byte colSecT[] { 0, 0, 0, 0 };
 byte colSecOld[] { 0, 0, 0, 0 };
 byte colSecIT[] { 0, 0, 0, 0 };
 
-byte lastRandomIndex = 0; //used to save last random color so the new one is not the same
+byte lastRandomIndex = 0;        // used to save last random color so the new one is not the same
 
-//transitions
+// transitions
 bool transitionActive = false;
 uint16_t transitionDelayDefault = transitionDelay;
 uint16_t transitionDelayTemp = transitionDelay;
 unsigned long transitionStartTime;
-float tperLast = 0; //crossfade transition progress, 0.0f - 1.0f
+float tperLast = 0;        // crossfade transition progress, 0.0f - 1.0f
 bool jsonTransitionOnce = false;
 
-//nightlight
+// nightlight
 bool nightlightActive = false;
 bool nightlightActiveOld = false;
 uint32_t nightlightDelayMs = 10;
 uint8_t nightlightDelayMinsDefault = nightlightDelayMins;
 unsigned long nightlightStartTime;
-byte briNlT = 0; //current nightlight brightness
+byte briNlT = 0;                     // current nightlight brightness
-byte colNlT[] { 0, 0, 0, 0 }; //current nightlight color
+byte colNlT[] { 0, 0, 0, 0 };        // current nightlight color
 
-//brightness
+// brightness
 unsigned long lastOnTime = 0;
 bool offMode = !turnOnAtBoot;
 byte bri = briS;
 byte briOld = 0;
 byte briT = 0;
 byte briIT = 0;
-byte briLast = 128; //brightness before turned off. Used for toggle function
+byte briLast = 128;          // brightness before turned off. Used for toggle function
-byte whiteLast = 128; //white channel before turned off. Used for toggle function
+byte whiteLast = 128;        // white channel before turned off. Used for toggle function
 
-//button
+// button
 bool buttonPressedBefore = false;
 bool buttonLongPressed = false;
 unsigned long buttonPressedTime = 0;
 unsigned long buttonWaitTime = 0;
 
-//notifications
+// notifications
 bool notifyDirectDefault = notifyDirect;
 bool receiveNotifications = true;
 unsigned long notificationSentTime = 0;
 byte notificationSentCallMode = NOTIFIER_CALL_MODE_INIT;
 bool notificationTwoRequired = false;
 
-//effects
+// effects
 byte effectCurrent = 0;
 byte effectSpeed = 128;
 byte effectIntensity = 128;
 byte effectPalette = 0;
 
-//network
+// network
 bool udpConnected = false, udpRgbConnected = false;
 
-//ui style
+// ui style
 bool showWelcomePage = false;
 
-//hue
+// hue
 byte hueError = HUE_ERROR_INACTIVE;
-//uint16_t hueFailCount = 0;
+// uint16_t hueFailCount = 0;
 float hueXLast = 0, hueYLast = 0;
 uint16_t hueHueLast = 0, hueCtLast = 0;
 byte hueSatLast = 0, hueBriLast = 0;
@@ -244,32 +244,32 @@ bool hueAuthRequired = false;
 bool hueReceived = false;
 bool hueStoreAllowed = false, hueNewKey = false;
 
-//overlays
+// overlays
 byte overlayCurrent = overlayDefault;
 byte overlaySpeed = 200;
 unsigned long overlayRefreshMs = 200;
 unsigned long overlayRefreshedTime;
 
-//cronixie
+// cronixie
 byte dP[] { 0, 0, 0, 0, 0, 0 };
 bool cronixieInit = false;
 
-//countdown
+// countdown
 unsigned long countdownTime = 1514764800L;
 bool countdownOverTriggered = true;
 
-//timer
+// timer
 byte lastTimerMinute = 0;
 byte timerHours[] = { 0, 0, 0, 0, 0, 0, 0, 0 };
 byte timerMinutes[] = { 0, 0, 0, 0, 0, 0, 0, 0 };
 byte timerMacro[] = { 0, 0, 0, 0, 0, 0, 0, 0 };
-byte timerWeekday[] = { 255, 255, 255, 255, 255, 255, 255, 255 }; //weekdays to activate on
+byte timerWeekday[] = { 255, 255, 255, 255, 255, 255, 255, 255 };        // weekdays to activate on
-//bit pattern of arr elem: 0b11111111: sun,sat,fri,thu,wed,tue,mon,validity
+// bit pattern of arr elem: 0b11111111: sun,sat,fri,thu,wed,tue,mon,validity
 
-//blynk
+// blynk
 bool blynkEnabled = false;
 
-//preset cycling
+// preset cycling
 bool presetCyclingEnabled = false;
 byte presetCycleMin = 1, presetCycleMax = 5;
 uint16_t presetCycleTime = 1250;
@@ -278,35 +278,35 @@ byte presetCycCurr = presetCycleMin;
 bool presetApplyBri = true;
 bool saveCurrPresetCycConf = false;
 
-//realtime
+// realtime
 byte realtimeMode = REALTIME_MODE_INACTIVE;
 IPAddress realtimeIP = (0, 0, 0, 0);
 unsigned long realtimeTimeout = 0;
 
-//mqtt
+// mqtt
 long lastMqttReconnectAttempt = 0;
 long lastInterfaceUpdate = 0;
 byte interfaceUpdateCallMode = NOTIFIER_CALL_MODE_INIT;
-char mqttStatusTopic[40] = ""; //this must be global because of async handlers
+char mqttStatusTopic[40] = "";        // this must be global because of async handlers
 
 #if AUXPIN >= 0
-    //auxiliary debug pin
+  // auxiliary debug pin
-byte auxTime = 0;
+  byte auxTime = 0;
-unsigned long auxStartTime = 0;
+  unsigned long auxStartTime = 0;
-bool auxActive = false, auxActiveBefore = false;
+  bool auxActive = false, auxActiveBefore = false;
 #endif
 
-//alexa udp
+// alexa udp
 String escapedMac;
 #ifndef WLED_DISABLE_ALEXA
-Espalexa espalexa;
+  Espalexa espalexa;
-EspalexaDevice* espalexaDevice;
+  EspalexaDevice* espalexaDevice;
 #endif
 
-//dns server
+// dns server
 DNSServer dnsServer;
 
-//network time
+// network time
 bool ntpConnected = false;
 time_t local = 0;
 unsigned long ntpLastSyncTime = 999000000L;
@@ -318,7 +318,7 @@ uint16_t ntpLocalPort = 2390;
 char* obuf;
 uint16_t olen = 0;
 
-//presets
+// presets
 uint16_t savedPresets = 0;
 int8_t currentPreset = -1;
 bool isPreset = false;
@@ -328,42 +328,42 @@ byte errorFlag = 0;
 String messageHead, messageSub;
 byte optionType;
 
-bool doReboot = false; //flag to initiate reboot from async handlers
+bool doReboot = false;        // flag to initiate reboot from async handlers
 bool doPublishMqtt = false;
 
-//server library objects
+// server library objects
 AsyncWebServer server(80);
 AsyncClient* hueClient = NULL;
 AsyncMqttClient* mqtt = NULL;
 
-//udp interface objects
+// udp interface objects
 WiFiUDP notifierUdp, rgbUdp;
 WiFiUDP ntpUdp;
 ESPAsyncE131 e131(handleE131Packet);
 bool e131NewData = false;
 
-//led fx library object
+// led fx library object
 WS2812FX strip = WS2812FX();
 
-//debug macro variable definitions
+// debug macro variable definitions
 #ifdef WLED_DEBUG
-unsigned long debugTime = 0;
+  unsigned long debugTime = 0;
-int lastWifiState = 3;
+  int lastWifiState = 3;
-unsigned long wifiStateChangedTime = 0;
+  unsigned long wifiStateChangedTime = 0;
-int loops = 0;
+  int loops = 0;
 #endif
 
 WLED::WLED()
 {
 }
 
-//turns all LEDs off and restarts ESP
+// turns all LEDs off and restarts ESP
 void WLED::reset()
 {
   briT = 0;
   long dly = millis();
   while (millis() - dly < 250) {
-    yield(); //enough time to send response to client
+    yield();        // enough time to send response to client
   }
   setAllLeds();
   DEBUG_PRINTLN("MODULE RESET");
@@ -381,7 +381,7 @@ bool oappend(const char* txt)
 {
   uint16_t len = strlen(txt);
   if (olen + len >= OMAX)
-    return false; //buffer full
+    return false;        // buffer full
   strcpy(obuf + olen, txt);
   olen += len;
   return true;
@@ -389,7 +389,7 @@ bool oappend(const char* txt)
 
 void WLED::loop()
 {
-  handleIR(); //2nd call to function needed for ESP32 to return valid results -- should be good for ESP8266, too
+  handleIR();        // 2nd call to function needed for ESP32 to return valid results -- should be good for ESP8266, too
   handleConnection();
   handleSerial();
   handleNotifications();
@@ -414,7 +414,7 @@ void WLED::loop()
   if (doReboot)
     reset();
 
-  if (!realtimeMode) //block stuff if WARLS/Adalight is enabled
+  if (!realtimeMode)        // block stuff if WARLS/Adalight is enabled
   {
     if (apActive)
       dnsServer.processNextRequest();
@@ -439,7 +439,7 @@ void WLED::loop()
   if (millis() - lastMqttReconnectAttempt > 30000)
     initMqtt();
 
-//DEBUG serial logging
+// DEBUG serial logging
 #ifdef WLED_DEBUG
   if (millis() - debugTime > 9999) {
     DEBUG_PRINTLN("---DEBUG INFO---");
@@ -467,7 +467,7 @@ void WLED::loop()
     debugTime = millis();
   }
   loops++;
-#endif // WLED_DEBU
+#endif        // WLED_DEBU
 }
 
 void WLED::setup()
@@ -478,10 +478,10 @@ void WLED::setup()
     ledCount = 30;
 
 #ifdef ESP8266
-#if LEDPIN == 3
+  #if LEDPIN == 3
-  if (ledCount > MAX_LEDS_DMA)
+    if (ledCount > MAX_LEDS_DMA)
-    ledCount = MAX_LEDS_DMA; //DMA method uses too much ram
+      ledCount = MAX_LEDS_DMA;        // DMA method uses too much ram
-#endif
+  #endif
 #endif
   Serial.begin(115200);
   Serial.setTimeout(50);
@@ -502,17 +502,17 @@ void WLED::setup()
   DEBUG_PRINT("heap ");
   DEBUG_PRINTLN(ESP.getFreeHeap());
 
-  strip.init(EEPROM.read(372), ledCount, EEPROM.read(2204)); //init LEDs quickly
+  strip.init(EEPROM.read(372), ledCount, EEPROM.read(2204));        // init LEDs quickly
   strip.setBrightness(0);
 
   DEBUG_PRINT("LEDs inited. heap usage ~");
   DEBUG_PRINTLN(heapPreAlloc - ESP.getFreeHeap());
 
 #ifndef WLED_DISABLE_FILESYSTEM
-#ifdef ARDUINO_ARCH_ESP32
+  #ifdef ARDUINO_ARCH_ESP32
-  SPIFFS.begin(true);
+    SPIFFS.begin(true);
-#endif
+  #endif
-  SPIFFS.begin();
+    SPIFFS.begin();
 #endif
 
   DEBUG_PRINTLN("Load EEPROM");
@@ -527,11 +527,11 @@ void WLED::setup()
     applyMacro(macroBoot);
   Serial.println("Ada");
 
-  //generate module IDs
+  // generate module IDs
   escapedMac = WiFi.macAddress();
   escapedMac.replace(":", "");
   escapedMac.toLowerCase();
-  if (strcmp(cmDNS, "x") == 0) //fill in unique mdns default
+  if (strcmp(cmDNS, "x") == 0)        // fill in unique mdns default
   {
     strcpy(cmDNS, "wled-");
     sprintf(cmDNS + 5, "%*s", 6, escapedMac.c_str() + 6);
@@ -560,9 +560,9 @@ void WLED::setup()
   }
 #endif
 #ifdef WLED_ENABLE_DMX
-  dmx.init(512); // initialize with bus length
+  dmx.init(512);        // initialize with bus length
 #endif
-  //HTTP server page init
+  // HTTP server page init
   initServer();
 }
 
@@ -579,7 +579,7 @@ void WLED::beginStrip()
     applyPreset(bootPreset, turnOnAtBoot);
   colorUpdated(NOTIFIER_CALL_MODE_INIT);
 
-//init relay pin
+// init relay pin
 #if RLYPIN >= 0
   pinMode(RLYPIN, OUTPUT);
 #if RLYMDE
@@ -589,7 +589,7 @@ void WLED::beginStrip()
 #endif
 #endif
 
-  //disable button if it is "pressed" unintentionally
+  // disable button if it is "pressed" unintentionally
 #ifdef BTNPIN
   if (digitalRead(BTNPIN) == LOW)
     buttonEnabled = false;
@@ -612,7 +612,7 @@ void WLED::initAP(bool resetAP)
   WiFi.softAPConfig(IPAddress(4, 3, 2, 1), IPAddress(4, 3, 2, 1), IPAddress(255, 255, 255, 0));
   WiFi.softAP(apSSID, apPass, apChannel, apHide);
 
-  if (!apActive) //start captive portal if AP active
+  if (!apActive)        // start captive portal if AP active
   {
     DEBUG_PRINTLN("Init AP interfaces");
     server.begin();
@@ -631,7 +631,7 @@ void WLED::initAP(bool resetAP)
 
 void WLED::initConnection()
 {
-  WiFi.disconnect(); //close old connections
+  WiFi.disconnect();        // close old connections
 #ifdef ESP8266
   WiFi.setPhyMode(WIFI_PHY_MODE_11N);
 #endif
@@ -647,7 +647,7 @@ void WLED::initConnection()
   if (!WLED_WIFI_CONFIGURED) {
     DEBUG_PRINT("No connection configured. ");
     if (!apActive)
-      initAP(); //instantly go to ap mode
+      initAP();        // instantly go to ap mode
     return;
   } else if (!apActive) {
     if (apBehavior == AP_BEHAVIOR_ALWAYS) {
@@ -687,7 +687,7 @@ void WLED::initInterfaces()
     hueIP[2] = WiFi.localIP()[2];
   }
 
-  //init Alexa hue emulation
+  // init Alexa hue emulation
   if (alexaEnabled)
     alexaInit();
 
@@ -736,7 +736,7 @@ void WLED::handleConnection()
   if (lastReconnectAttempt == 0)
     initConnection();
 
-  //reconnect WiFi to clear stale allocations if heap gets too low
+  // reconnect WiFi to clear stale allocations if heap gets too low
   if (millis() - heapTime > 5000) {
     uint32_t heap = ESP.getFreeHeap();
     if (heap < 9000 && lastHeap < 9000) {
@@ -761,11 +761,11 @@ void WLED::handleConnection()
       stacO = stac;
       DEBUG_PRINT("Connected AP clients: ");
       DEBUG_PRINTLN(stac);
-      if (!WLED_CONNECTED && WLED_WIFI_CONFIGURED) { //trying to connect, but not connected
+      if (!WLED_CONNECTED && WLED_WIFI_CONFIGURED) {        // trying to connect, but not connected
         if (stac)
-          WiFi.disconnect(); //disable search so that AP can work
+          WiFi.disconnect();        // disable search so that AP can work
         else
-          initConnection(); //restart search
+          initConnection();        // restart search
       }
     }
   }
@@ -787,14 +787,14 @@ void WLED::handleConnection()
       initConnection();
     if (!apActive && millis() - lastReconnectAttempt > 12000 && (!wasConnected || apBehavior == AP_BEHAVIOR_NO_CONN))
       initAP();
-  } else if (!interfacesInited) { //newly connected
+  } else if (!interfacesInited) {        // newly connected
     DEBUG_PRINTLN("");
     DEBUG_PRINT("Connected! IP address: ");
     DEBUG_PRINTLN(WiFi.localIP());
     initInterfaces();
     userConnected();
 
-    //shut down AP
+    // shut down AP
     if (apBehavior != AP_BEHAVIOR_ALWAYS && apActive) {
       dnsServer.stop();
       WiFi.softAPdisconnect(true);

wled00/wled.h

@@ -14,41 +14,41 @@
 // Alternatively, with platformio pass your chosen flags to your custom build target in platformio.ini.override
 
 // You are required to disable over-the-air updates:
-//#define WLED_DISABLE_OTA         //saves 14kb
+//#define WLED_DISABLE_OTA         // saves 14kb
 
 // You need to choose some of these features to disable:
-//#define WLED_DISABLE_ALEXA       //saves 11kb
+//#define WLED_DISABLE_ALEXA       // saves 11kb
-//#define WLED_DISABLE_BLYNK       //saves 6kb
+//#define WLED_DISABLE_BLYNK       // saves 6kb
-//#define WLED_DISABLE_CRONIXIE    //saves 3kb
+//#define WLED_DISABLE_CRONIXIE    // saves 3kb
-//#define WLED_DISABLE_HUESYNC     //saves 4kb
+//#define WLED_DISABLE_HUESYNC     // saves 4kb
-//#define WLED_DISABLE_INFRARED    //there is no pin left for this on ESP8266-01, saves 12kb
+//#define WLED_DISABLE_INFRARED    // there is no pin left for this on ESP8266-01, saves 12kb
-#define WLED_ENABLE_MQTT         //saves 12kb
+#define WLED_ENABLE_MQTT            // saves 12kb
-#define WLED_ENABLE_ADALIGHT     //saves 500b only
+#define WLED_ENABLE_ADALIGHT        // saves 500b only
-//#define WLED_ENABLE_DMX          //uses 3.5kb
+//#define WLED_ENABLE_DMX          // uses 3.5kb
 
-#define WLED_DISABLE_FILESYSTEM //SPIFFS is not used by any WLED feature yet
+#define WLED_DISABLE_FILESYSTEM        // SPIFFS is not used by any WLED feature yet
-//#define WLED_ENABLE_FS_SERVING   //Enable sending html file from SPIFFS before serving progmem version
+//#define WLED_ENABLE_FS_SERVING   // Enable sending html file from SPIFFS before serving progmem version
-//#define WLED_ENABLE_FS_EDITOR    //enable /edit page for editing SPIFFS content. Will also be disabled with OTA lock
+//#define WLED_ENABLE_FS_EDITOR    // enable /edit page for editing SPIFFS content. Will also be disabled with OTA lock
 
 // to toggle usb serial debug (un)comment the following line
 //#define WLED_DEBUG
 
 // Library inclusions. 
 #include <Arduino.h>
-#ifdef ESP8266
+  #ifdef ESP8266
-#include <ESP8266WiFi.h>
+  #include <ESP8266WiFi.h>
-#include <ESP8266mDNS.h>
+  #include <ESP8266mDNS.h>
-#include <ESPAsyncTCP.h>
+  #include <ESPAsyncTCP.h>
-extern "C"
+  extern "C"
-{
+  {
-#include <user_interface.h>
+  #include <user_interface.h>
-}
+  }
-#else //ESP32
+#else // ESP32
-#include <WiFi.h>
+  #include <WiFi.h>
-#include "esp_wifi.h"
+  #include "esp_wifi.h"
-#include <ESPmDNS.h>
+  #include <ESPmDNS.h>
-#include <AsyncTCP.h>
+  #include <AsyncTCP.h>
-#include "SPIFFS.h"
+  #include "SPIFFS.h"
 #endif
 
 #include <ESPAsyncWebServer.h>
@@ -56,25 +56,28 @@ extern "C"
 #include <WiFiUdp.h>
 #include <DNSServer.h>
 #ifndef WLED_DISABLE_OTA
-#include <ArduinoOTA.h>
+  #include <ArduinoOTA.h>
 #endif
 #include <SPIFFSEditor.h>
 #include "src/dependencies/time/TimeLib.h"
 #include "src/dependencies/timezone/Timezone.h"
+
 #ifndef WLED_DISABLE_ALEXA
-#define ESPALEXA_ASYNC
+  #define ESPALEXA_ASYNC
-#define ESPALEXA_NO_SUBPAGE
+  #define ESPALEXA_NO_SUBPAGE
-#define ESPALEXA_MAXDEVICES 1
+  #define ESPALEXA_MAXDEVICES 1
-// #define ESPALEXA_DEBUG
+  // #define ESPALEXA_DEBUG
-#include "src/dependencies/espalexa/Espalexa.h"
+  #include "src/dependencies/espalexa/Espalexa.h"
 #endif
 #ifndef WLED_DISABLE_BLYNK
-#include "src/dependencies/blynk/BlynkSimpleEsp.h"
+  #include "src/dependencies/blynk/BlynkSimpleEsp.h"
 #endif
+
 #include "src/dependencies/e131/ESPAsyncE131.h"
 #include "src/dependencies/async-mqtt-client/AsyncMqttClient.h"
 #include "src/dependencies/json/AsyncJson-v6.h"
 #include "src/dependencies/json/ArduinoJson-v6.h"
+
 #include "html_ui.h"
 #include "html_settings.h"
 #include "html_other.h"
@@ -83,35 +86,35 @@ extern "C"
 #include "const.h"
 
 #ifndef CLIENT_SSID
-#define CLIENT_SSID DEFAULT_CLIENT_SSID
+  #define CLIENT_SSID DEFAULT_CLIENT_SSID
 #endif
 
 #ifndef CLIENT_PASS
-#define CLIENT_PASS ""
+  #define CLIENT_PASS ""
 #endif
 
 #if IR_PIN < 0
-#ifndef WLED_DISABLE_INFRARED
+  #ifndef WLED_DISABLE_INFRARED
-#define WLED_DISABLE_INFRARED
+    #define WLED_DISABLE_INFRARED
-#endif
+  #endif
 #endif
 
 #ifndef WLED_DISABLE_INFRARED
-#include <IRremoteESP8266.h>
+  #include <IRremoteESP8266.h>
-#include <IRrecv.h>
+  #include <IRrecv.h>
-#include <IRutils.h>
+  #include <IRutils.h>
 #endif
 
 // remove flicker because PWM signal of RGB channels can become out of phase
 #if defined(WLED_USE_ANALOG_LEDS) && defined(ESP8266)
-#include "src/dependencies/arduino/core_esp8266_waveform.h"
+  #include "src/dependencies/arduino/core_esp8266_waveform.h"
 #endif
 
 // enable additional debug output
 #ifdef WLED_DEBUG
-#ifndef ESP8266
+  #ifndef ESP8266
-#include <rom/rtc.h>
+  #include <rom/rtc.h>
-#endif
+  #endif
 #endif
 
 // version code in format yymmddb (b = daily build)
@@ -137,7 +140,7 @@ extern IPAddress staticSubnet;
 extern bool noWifiSleep;                   
 extern uint16_t ledCount;            
 extern bool useRGBW;              
-#define ABL_MILLIAMPS_DEFAULT 850; //auto lower brightness to stay close to milliampere limit
+#define ABL_MILLIAMPS_DEFAULT 850; // auto lower brightness to stay close to milliampere limit
 extern bool turnOnAtBoot;          
 extern byte bootPreset;               
 extern byte col[]; 
@@ -224,11 +227,10 @@ extern bool wifiLock;
 extern bool aOtaEnabled; 
 extern uint16_t userVar0, userVar1;
 #ifdef WLED_ENABLE_DMX
-extern byte DMXChannels; 
+  extern byte DMXChannels; 
-extern byte DMXFixtureMap[15];
+  extern byte DMXFixtureMap[15];
-extern 
+  extern uint16_t DMXGap;   
-extern uint16_t DMXGap;   
+  extern uint16_t DMXStart; 
-extern uint16_t DMXStart; 
 #endif
 extern bool apActive;
 extern bool forceReconnect;
@@ -315,15 +317,17 @@ extern long lastInterfaceUpdate;
 extern byte interfaceUpdateCallMode;
 extern char mqttStatusTopic[40]; 
 #if AUXPIN >= 0
-extern byte auxTime;
+  extern byte auxTime;
-extern unsigned long auxStartTime;
+  extern unsigned long auxStartTime;
-extern bool auxActive;
+  extern bool auxActive;
 #endif
 extern String escapedMac;
 #ifndef WLED_DISABLE_ALEXA
-extern Espalexa espalexa;
+  extern Espalexa espalexa;
-extern EspalexaDevice *espalexaDevice;
+  extern EspalexaDevice *espalexaDevice;
 #endif
+
+#define NTP_PACKET_SIZE 48
 extern DNSServer dnsServer;
 extern bool ntpConnected;
 extern time_t local;
@@ -331,15 +335,14 @@ extern unsigned long ntpLastSyncTime;
 extern unsigned long ntpPacketSentTime;
 extern IPAddress ntpServerIP;
 extern uint16_t ntpLocalPort;
-#define NTP_PACKET_SIZE 48
 
-//maximum number of LEDs - MAX_LEDS is coming from the JSON response getting too big, MAX_LEDS_DMA will become a timing issue
+// maximum number of LEDs - MAX_LEDS is coming from the JSON response getting too big, MAX_LEDS_DMA will become a timing issue
 #define MAX_LEDS 1500
 #define MAX_LEDS_DMA 500
 
-//string temp buffer (now stored in stack locally)
+// string temp buffer (now stored in stack locally)
 #define OMAX 2048
-extern char *obuf;
+extern char* obuf;
 extern uint16_t olen;
 
 extern uint16_t savedPresets;
@@ -348,11 +351,11 @@ extern bool isPreset;
 extern byte errorFlag;
 extern String messageHead, messageSub;
 extern byte optionType;
-extern bool doReboot; 
+extern bool doReboot;
 extern bool doPublishMqtt;
 extern AsyncWebServer server;
-extern AsyncClient *hueClient;
+extern AsyncClient* hueClient;
-extern AsyncMqttClient *mqtt;
+extern AsyncMqttClient* mqtt;
 extern WiFiUDP notifierUdp, rgbUdp;
 extern WiFiUDP ntpUdp;
 extern ESPAsyncE131 e131;
@@ -362,46 +365,45 @@ extern WS2812FX strip;
 #define WLED_CONNECTED (WiFi.status() == WL_CONNECTED)
 #define WLED_WIFI_CONFIGURED (strlen(clientSSID) >= 1 && strcmp(clientSSID, DEFAULT_CLIENT_SSID) != 0)
 
-//debug macros
+// debug macros
 #ifdef WLED_DEBUG
-#define DEBUG_PRINT(x) Serial.print(x)
+  #define DEBUG_PRINT(x) Serial.print(x)
-#define DEBUG_PRINTLN(x) Serial.println(x)
+  #define DEBUG_PRINTLN(x) Serial.println(x)
-#define DEBUG_PRINTF(x) Serial.printf(x)
+  #define DEBUG_PRINTF(x) Serial.printf(x)
-extern unsigned long debugTime;
+  extern unsigned long debugTime;
-extern int lastWifiState;
+  extern int lastWifiState;
-extern unsigned long wifiStateChangedTime;
+  extern unsigned long wifiStateChangedTime;
-extern int loops;
+  extern int loops;
 #else
-#define DEBUG_PRINT(x)
+  #define DEBUG_PRINT(x)
-#define DEBUG_PRINTLN(x)
+  #define DEBUG_PRINTLN(x)
-#define DEBUG_PRINTF(x)
+  #define DEBUG_PRINTF(x)
 #endif
 
 // append new c string to temp buffer efficiently
-bool oappend(const char *txt);
+bool oappend(const char* txt);
 // append new number to temp buffer efficiently
 bool oappendi(int i);
 
-class WLED
+class WLED {
-{
 public:
-    WLED(); 
+  WLED();
-    static WLED &instance()
+  static WLED& instance()
-    {
+  {
-        static WLED instance;
+    static WLED instance;
-        return instance;
+    return instance;
-    }
+  }
 
-    //boot starts here
+  // boot starts here
-    void setup();
+  void setup();
 
-    void loop();
+  void loop();
-    void reset();
+  void reset();
 
-    void beginStrip();
+  void beginStrip();
-    void handleConnection();
+  void handleConnection();
-    void initAP(bool resetAP = false);
+  void initAP(bool resetAP = false);
-    void initConnection();
+  void initConnection();
-    void initInterfaces();
+  void initInterfaces();
 };
-#endif // WLED_H
+#endif        // WLED_H