Merge pull request #4033 from adamsthws/0_15_internal_temp_usermod_improvement_new

Usermod Updated: Internal Temperature V2

usermods/Internal_Temperature_v2/readme.md

@@ -1,17 +1,44 @@
 # Internal Temperature Usermod
-This usermod adds the temperature readout to the Info tab and also publishes that over the topic `mcutemp` topic.
 
-## Important
+![Screenshot of WLED info page](assets/screenshot_info.png)
-A shown temp of 53,33°C might indicate that the internal temp is not supported.
 
-ESP8266 does not have a internal temp sensor
+![Screenshot of WLED usermod settings page](assets/screenshot_settings.png)
+
+
+## Features
+ - 🌡️ Adds the internal temperature readout of the chip to the `Info` tab
+ - 🥵 High temperature indicator/action. (Configurable threshold and preset)
+ - 📣 Publishes the internal temperature over the MQTT topic: `mcutemp`
+
+
+## Use Examples
+- Warn of excessive/damaging temperatures by the triggering of a 'warning' preset
+- Activate a cooling fan (when used with the multi-relay usermod)
+
+
+## Compatibility
+- A shown temp of 53,33°C might indicate that the internal temp is not supported
+- ESP8266 does not have a internal temp sensor -> Disabled (Indicated with a readout of '-1')
+- ESP32S2 seems to crash on reading the sensor -> Disabled (Indicated with a readout of '-1')
 
-ESP32S2 seems to crash on reading the sensor -> disabled
 
 ## Installation
-Add a build flag `-D USERMOD_INTERNAL_TEMPERATURE` to your `platformio.ini` (or `platformio_override.ini`).
+- Add a build flag `-D USERMOD_INTERNAL_TEMPERATURE` to your `platformio.ini` (or `platformio_override.ini`).
+
+
+## 📝 Change Log
+
+2024-06-26
+
+- Added "high-temperature-indication" feature
+- Documentation updated
+
+2023-09-01
+
+* "Internal Temperature" usermod created
+
 
 ## Authors
-Soeren Willrodt [@lost-hope](https://github.com/lost-hope)
+- Soeren Willrodt [@lost-hope](https://github.com/lost-hope)
-
+- Dimitry Zhemkov [@dima-zhemkov](https://github.com/dima-zhemkov)
-Dimitry Zhemkov [@dima-zhemkov](https://github.com/dima-zhemkov)
+- Adam Matthews [@adamsthws](https://github.com/adamsthws)

usermods/Internal_Temperature_v2/usermod_internal_temperature.h

@@ -6,14 +6,23 @@ class InternalTemperatureUsermod : public Usermod
 {
 
 private:
+  static constexpr unsigned long minLoopInterval = 1000;  // minimum allowable interval (ms)
   unsigned long loopInterval = 10000;
   unsigned long lastTime = 0;
   bool isEnabled = false;
-  float temperature = 0;
+  float temperature = 0.0f;
+  uint8_t previousPlaylist = 0;         // Stores the playlist that was active before high-temperature activation
+  uint8_t previousPreset = 0;           // Stores the preset that was active before high-temperature activation
+  uint8_t presetToActivate = 0;         // Preset to activate when temp goes above threshold (0 = disabled)
+  float activationThreshold = 95.0f;    // Temperature threshold to trigger high-temperature actions
+  float resetMargin = 2.0f;             // Margin below the activation threshold (Prevents frequent toggling when close to threshold)
+  bool isAboveThreshold = false;        // Flag to track if the high temperature preset is currently active
 
   static const char _name[];
   static const char _enabled[];
   static const char _loopInterval[];
+  static const char _activationThreshold[];
+  static const char _presetToActivate[];
 
   // any private methods should go here (non-inline method should be defined out of class)
   void publishMqtt(const char *state, bool retain = false); // example for publishing MQTT message
@@ -32,6 +41,7 @@ public:
 
     lastTime = millis();
 
+// Measure the temperature
 #ifdef ESP8266 // ESP8266
     // does not seem possible
     temperature = -1;
@@ -41,6 +51,57 @@ public:
     temperature = roundf(temperatureRead() * 10) / 10;
 #endif
 
+    // Check if temperature has exceeded the activation threshold
+    if (temperature >= activationThreshold) {
+      // Update the state flag if not already set
+      if (!isAboveThreshold) {
+        isAboveThreshold = true;
+        }
+      // Check if a 'high temperature' preset is configured and it's not already active
+      if (presetToActivate != 0 && currentPreset != presetToActivate) {
+        // If a playlist is active, store it for reactivation later
+        if (currentPlaylist > 0) {
+          previousPlaylist = currentPlaylist;
+        }
+        // If a preset is active, store it for reactivation later
+        else if (currentPreset > 0) {
+          previousPreset = currentPreset;
+        // If no playlist or preset is active, save current state for reactivation later
+        } else {
+          saveTemporaryPreset();
+        }
+        // Activate the 'high temperature' preset
+        applyPreset(presetToActivate);
+        }
+      }
+    // Check if temperature is back below the threshold
+    else if (temperature <= (activationThreshold - resetMargin)) {
+      // Update the state flag if not already set
+      if (isAboveThreshold){
+        isAboveThreshold = false;
+        }
+      // Check if the 'high temperature' preset is active
+      if (currentPreset == presetToActivate) {
+        // Check if a previous playlist was stored
+        if (previousPlaylist > 0) {
+          // Reactivate the stored playlist
+          applyPreset(previousPlaylist);
+          // Clear the stored playlist
+          previousPlaylist = 0;
+          }
+        // Check if a previous preset was stored
+        else if (previousPreset > 0) {
+          // Reactivate the stored preset
+          applyPreset(previousPreset);
+          // Clear the stored preset
+          previousPreset = 0;
+          // If no previous playlist or preset was stored, revert to the stored state
+        } else {
+          applyTemporaryPreset();
+          }
+        }
+      }
+
 #ifndef WLED_DISABLE_MQTT
     if (WLED_MQTT_CONNECTED)
     {
@@ -80,6 +141,19 @@ public:
     JsonObject top = root.createNestedObject(FPSTR(_name));
     top[FPSTR(_enabled)] = isEnabled;
     top[FPSTR(_loopInterval)] = loopInterval;
+    top[FPSTR(_activationThreshold)] = activationThreshold;
+    top[FPSTR(_presetToActivate)] = presetToActivate;
+  }
+
+    // Append useful info to the usermod settings gui
+    void appendConfigData()
+    {
+    // Display 'ms' next to the 'Loop Interval' setting
+    oappend(SET_F("addInfo('Internal Temperature:Loop Interval', 1, 'ms');"));
+    // Display '°C' next to the 'Activation Threshold' setting
+    oappend(SET_F("addInfo('Internal Temperature:Activation Threshold', 1, '°C');"));
+    // Display '0 = Disabled' next to the 'Preset To Activate' setting
+    oappend(SET_F("addInfo('Internal Temperature:Preset To Activate', 1, '0 = unused');"));
     }
 
   bool readFromConfig(JsonObject &root)
@@ -88,7 +162,9 @@ public:
     bool configComplete = !top.isNull();
     configComplete &= getJsonValue(top[FPSTR(_enabled)], isEnabled);
     configComplete &= getJsonValue(top[FPSTR(_loopInterval)], loopInterval);
-
+    loopInterval = max(loopInterval, minLoopInterval);    // Makes sure the loop interval isn't too small.
+    configComplete &= getJsonValue(top[FPSTR(_presetToActivate)], presetToActivate);
+    configComplete &= getJsonValue(top[FPSTR(_activationThreshold)], activationThreshold);
     return configComplete;
   }
 
@@ -101,6 +177,8 @@ public:
 const char InternalTemperatureUsermod::_name[] PROGMEM = "Internal Temperature";
 const char InternalTemperatureUsermod::_enabled[] PROGMEM = "Enabled";
 const char InternalTemperatureUsermod::_loopInterval[] PROGMEM = "Loop Interval";
+const char InternalTemperatureUsermod::_activationThreshold[] PROGMEM = "Activation Threshold";
+const char InternalTemperatureUsermod::_presetToActivate[] PROGMEM = "Preset To Activate";
 
 void InternalTemperatureUsermod::publishMqtt(const char *state, bool retain)
 {