diff --git a/usermods/Battery/battery_defaults.h b/usermods/Battery/battery_defaults.h
index f4060ca60..fbdaf4877 100644
--- a/usermods/Battery/battery_defaults.h
+++ b/usermods/Battery/battery_defaults.h
@@ -1,6 +1,8 @@
 #ifndef UMBDefaults_h
 #define UMBDefaults_h
 
+#include "wled.h"
+
 // pin defaults
 // for the esp32 it is best to use the ADC1: GPIO32 - GPIO39
 // https://docs.espressif.com/projects/esp-idf/en/latest/esp32/api-reference/peripherals/adc.html
diff --git a/usermods/Battery/readme.md b/usermods/Battery/readme.md
index d55573abe..1ca229763 100644
--- a/usermods/Battery/readme.md
+++ b/usermods/Battery/readme.md
@@ -36,13 +36,12 @@ define `USERMOD_BATTERY` in `wled00/my_config.h`
 | Name                                            | Unit        | Description                                                                           |
 | ----------------------------------------------- | ----------- |-------------------------------------------------------------------------------------- |
 | `USERMOD_BATTERY`                               |             | define this (in `my_config.h`) to have this usermod included wled00\usermods_list.cpp |
-| `USERMOD_BATTERY_USE_LIPO`                      |             | define this (in `my_config.h`) if you use LiPo rechargeables (1S)                     |
 | `USERMOD_BATTERY_MEASUREMENT_PIN`               |             | defaults to A0 on ESP8266 and GPIO35 on ESP32                                         |
 | `USERMOD_BATTERY_MEASUREMENT_INTERVAL`          | ms          | battery check interval. defaults to 30 seconds                                        |
-| `USERMOD_BATTERY_MIN_VOLTAGE`                   | v           | minimum battery voltage. default is 2.6 (18650 battery standard)                      |
-| `USERMOD_BATTERY_MAX_VOLTAGE`                   | v           | maximum battery voltage. default is 4.2 (18650 battery standard)                      |
-| `USERMOD_BATTERY_TOTAL_CAPACITY`                | mAh         | the capacity of all cells in parralel sumed up                                        |
-| `USERMOD_BATTERY_CALIBRATION`                   |             | offset / calibration number, fine tune the measured voltage by the microcontroller    |
+| `USERMOD_BATTERY_{TYPE}_MIN_VOLTAGE`            | v           | minimum battery voltage. default is 2.6 (18650 battery standard)                      |
+| `USERMOD_BATTERY_{TYPE}_MAX_VOLTAGE`            | v           | maximum battery voltage. default is 4.2 (18650 battery standard)                      |
+| `USERMOD_BATTERY_{TYPE}_TOTAL_CAPACITY`         | mAh         | the capacity of all cells in parralel sumed up                                        |
+| `USERMOD_BATTERY_{TYPE}_CALIBRATION`            |             | offset / calibration number, fine tune the measured voltage by the microcontroller    |
 | Auto-Off                                        | ---         | ---                                                                                   |
 | `USERMOD_BATTERY_AUTO_OFF_ENABLED`              | true/false  | enables auto-off                                                                      |
 | `USERMOD_BATTERY_AUTO_OFF_THRESHOLD`            | % (0-100)   | when this threshold is reached master power turns off                                 |
@@ -54,6 +53,13 @@ define `USERMOD_BATTERY` in `wled00/my_config.h`
 
 All parameters can be configured at runtime via the Usermods settings page.
 
+**NOTICE:** Each Battery type can be pre-configured individualy (in `my_config.h`)
+
+| Name            | Alias         | `my_config.h` example                 |
+| --------------- | ------------- | ------------------------------------- |
+| Lithium Polymer | lipo (Li-Po)  | `USERMOD_BATTERY_lipo_MIN_VOLTAGE`    |
+| Lithium Ionen   | lion (Li-Ion) | `USERMOD_BATTERY_lion_TOTAL_CAPACITY` |
+
 ## ⚠️ Important
 
 - Make sure you know your battery specifications! All batteries are **NOT** the same!