mirror of
https://github.com/wled/WLED.git
synced 2025-07-14 14:26:33 +00:00
fix outdated build options
* DEFAULT_LED_PIN --> DATA_PINS
* DEFAULT_LED_COUNT --> PIXEL_COUNTS
* DEFAULT_LED_TYPE --> LED_TYPES
* USERMOD_AUDIOREACTIVE --> ${esp32.AR_build_flags}
This commit is contained in:
Frank
parent
3c11c8441f
commit
c6fd4c51cf
@ -28,8 +28,8 @@ lib_deps = ${esp8266.lib_deps}
|
||||
; robtillaart/SHT85@~0.3.3
|
||||
; ;gmag11/QuickESPNow @ ~0.7.0 # will also load QuickDebug
|
||||
; https://github.com/blazoncek/QuickESPNow.git#optional-debug ;; exludes debug library
|
||||
; ${esp32.AR_lib_deps} ;; used for USERMOD_AUDIOREACTIVE
|
||||
; bitbank2/PNGdec@^1.0.1 ;; used for POV display uncomment following
|
||||
; ${esp32.AR_lib_deps} ;; needed for USERMOD_AUDIOREACTIVE
|
||||
|
||||
build_unflags = ${common.build_unflags}
|
||||
build_flags = ${common.build_flags} ${esp8266.build_flags}
|
||||
@ -141,7 +141,8 @@ build_flags = ${common.build_flags} ${esp8266.build_flags}
|
||||
; -D PIR_SENSOR_MAX_SENSORS=2 # max allowable sensors (uses OR logic for triggering)
|
||||
;
|
||||
; Use Audioreactive usermod and configure I2S microphone
|
||||
; -D USERMOD_AUDIOREACTIVE
|
||||
; ${esp32.AR_build_flags} ;; default flags required to propery configure ArduinoFFT
|
||||
; ;; don't forget to add ArduinoFFT to your libs_deps: ${esp32.AR_lib_deps}
|
||||
; -D AUDIOPIN=-1
|
||||
; -D DMTYPE=1 # 0-analog/disabled, 1-I2S generic, 2-ES7243, 3-SPH0645, 4-I2S+mclk, 5-I2S PDM
|
||||
; -D I2S_SDPIN=36
|
||||
@ -157,17 +158,22 @@ build_flags = ${common.build_flags} ${esp8266.build_flags}
|
||||
; -D USERMOD_POV_DISPLAY
|
||||
; Use built-in or custom LED as a status indicator (assumes LED is connected to GPIO16)
|
||||
; -D STATUSLED=16
|
||||
;
|
||||
;
|
||||
; set the name of the module - make sure there is a quote-backslash-quote before the name and a backslash-quote-quote after the name
|
||||
; -D SERVERNAME="\"WLED\""
|
||||
;
|
||||
;
|
||||
; set the number of LEDs
|
||||
; -D DEFAULT_LED_COUNT=30
|
||||
; -D PIXEL_COUNTS=30
|
||||
; or this for multiple outputs
|
||||
; -D PIXEL_COUNTS=30,30
|
||||
;
|
||||
; set the default LED type
|
||||
; -D DEFAULT_LED_TYPE=22 # see const.h (TYPE_xxxx)
|
||||
; -D LED_TYPES=22 # see const.h (TYPE_xxxx)
|
||||
; or this for multiple outputs
|
||||
; -D LED_TYPES=TYPE_SK6812_RGBW,TYPE_WS2812_RGB
|
||||
;
|
||||
; set default color order of your led strip
|
||||
; -D DEFAULT_LED_COLOR_ORDER=COL_ORDER_GRB
|
||||
;
|
||||
; set milliampere limit when using ESP power pin (or inadequate PSU) to power LEDs
|
||||
; -D ABL_MILLIAMPS_DEFAULT=850
|
||||
@ -176,9 +182,6 @@ build_flags = ${common.build_flags} ${esp8266.build_flags}
|
||||
; enable IR by setting remote type
|
||||
; -D IRTYPE=0 # 0 Remote disabled | 1 24-key RGB | 2 24-key with CT | 3 40-key blue | 4 40-key RGB | 5 21-key RGB | 6 6-key black | 7 9-key red | 8 JSON remote
|
||||
;
|
||||
; set default color order of your led strip
|
||||
; -D DEFAULT_LED_COLOR_ORDER=COL_ORDER_GRB
|
||||
;
|
||||
; use PSRAM on classic ESP32 rev.1 (rev.3 or above has no issues)
|
||||
; -DBOARD_HAS_PSRAM -mfix-esp32-psram-cache-issue # needed only for classic ESP32 rev.1
|
||||
;
|
||||
@ -241,7 +244,9 @@ platform = ${esp32.platform}
|
||||
platform_packages = ${esp32.platform_packages}
|
||||
build_unflags = ${common.build_unflags}
|
||||
build_flags = ${common.build_flags} ${esp32.build_flags} #-D WLED_DISABLE_BROWNOUT_DET
|
||||
${esp32.AR_build_flags} ;; optional - includes USERMOD_AUDIOREACTIVE
|
||||
lib_deps = ${esp32.lib_deps}
|
||||
${esp32.AR_lib_deps} ;; needed for USERMOD_AUDIOREACTIVE
|
||||
monitor_filters = esp32_exception_decoder
|
||||
board_build.partitions = ${esp32.default_partitions}
|
||||
board_build.f_flash = 80000000L
|
||||
@ -256,7 +261,9 @@ platform = ${esp32_idf_V4.platform}
|
||||
platform_packages = ${esp32_idf_V4.platform_packages}
|
||||
build_unflags = ${common.build_unflags}
|
||||
build_flags = ${common.build_flags} ${esp32_idf_V4.build_flags} #-D WLED_DISABLE_BROWNOUT_DET
|
||||
${esp32.AR_build_flags} ;; includes USERMOD_AUDIOREACTIVE
|
||||
lib_deps = ${esp32_idf_V4.lib_deps}
|
||||
${esp32.AR_lib_deps} ;; needed for USERMOD_AUDIOREACTIVE
|
||||
monitor_filters = esp32_exception_decoder
|
||||
board_build.partitions = ${esp32.default_partitions}
|
||||
board_build.f_flash = 80000000L
|
||||
@ -307,7 +314,7 @@ platform = ${common.platform_wled_default}
|
||||
platform_packages = ${common.platform_packages}
|
||||
board_build.ldscript = ${common.ldscript_4m1m}
|
||||
build_unflags = ${common.build_unflags}
|
||||
build_flags = ${common.build_flags} ${esp8266.build_flags} -D WLED_USE_SHOJO_PCB
|
||||
build_flags = ${common.build_flags} ${esp8266.build_flags} -D WLED_USE_SHOJO_PCB ;; NB: WLED_USE_SHOJO_PCB is not used anywhere in the source code. Not sure why its needed.
|
||||
lib_deps = ${esp8266.lib_deps}
|
||||
|
||||
[env:d1_mini_debug]
|
||||
@ -373,7 +380,7 @@ build_flags = ${common.build_flags} ${esp32.build_flags}
|
||||
-D RLYPIN=19
|
||||
-D BTNPIN=17
|
||||
-D IRPIN=18
|
||||
-D UWLED_USE_MY_CONFIG
|
||||
-UWLED_USE_MY_CONFIG
|
||||
-D USERMOD_DALLASTEMPERATURE
|
||||
-D USERMOD_FOUR_LINE_DISPLAY
|
||||
-D TEMPERATURE_PIN=23
|
||||
@ -414,7 +421,7 @@ platform_packages = ${common.platform_packages}
|
||||
board_build.ldscript = ${common.ldscript_2m512k}
|
||||
build_unflags = ${common.build_unflags}
|
||||
build_flags = ${common.build_flags} ${esp8266.build_flags} -D BTNPIN=-1 -D RLYPIN=-1 -D DATA_PINS=4,12,14,13,5
|
||||
-D DEFAULT_LED_TYPE=TYPE_ANALOG_5CH -D WLED_DISABLE_INFRARED -D WLED_MAX_CCT_BLEND=0
|
||||
-D LED_TYPES=TYPE_ANALOG_5CH -D WLED_DISABLE_INFRARED -D WLED_MAX_CCT_BLEND=0
|
||||
lib_deps = ${esp8266.lib_deps}
|
||||
|
||||
[env:Athom_15w_RGBCW] ;15w bulb
|
||||
@ -424,7 +431,7 @@ platform_packages = ${common.platform_packages}
|
||||
board_build.ldscript = ${common.ldscript_2m512k}
|
||||
build_unflags = ${common.build_unflags}
|
||||
build_flags = ${common.build_flags} ${esp8266.build_flags} -D BTNPIN=-1 -D RLYPIN=-1 -D DATA_PINS=4,12,14,5,13
|
||||
-D DEFAULT_LED_TYPE=TYPE_ANALOG_5CH -D WLED_DISABLE_INFRARED -D WLED_MAX_CCT_BLEND=0 -D WLED_USE_IC_CCT
|
||||
-D LED_TYPES=TYPE_ANALOG_5CH -D WLED_DISABLE_INFRARED -D WLED_MAX_CCT_BLEND=0 -D WLED_USE_IC_CCT
|
||||
lib_deps = ${esp8266.lib_deps}
|
||||
|
||||
[env:Athom_3Pin_Controller] ;small controller with only data
|
||||
@ -500,7 +507,7 @@ build_flags = ${common.build_flags} ${esp32.build_flags} -D WLED_DISABLE_BROWNOU
|
||||
-D DATA_PINS=12
|
||||
-D RLYPIN=27
|
||||
-D BTNPIN=34
|
||||
-D DEFAULT_LED_COUNT=6
|
||||
-D PIXEL_COUNTS=6
|
||||
# Display config
|
||||
-D ST7789_DRIVER
|
||||
-D TFT_WIDTH=135
|
||||
|
||||
Loading…
x
Reference in New Issue
Block a user