Merge pull request #4244 from MoonModules/framerate_ac015

Improved framerate control code - strip.show(), strip.service()

.devcontainer/Dockerfile

@@ -2,7 +2,12 @@
 
 # [Choice] Python version: 3, 3.9, 3.8, 3.7, 3.6
 ARG VARIANT="3"
-FROM mcr.microsoft.com/devcontainers/python:0-${VARIANT}
+FROM mcr.microsoft.com/vscode/devcontainers/python:0-${VARIANT}
+
+# [Option] Install Node.js
+ARG INSTALL_NODE="true"
+ARG NODE_VERSION="lts/*"
+RUN if [ "${INSTALL_NODE}" = "true" ]; then su vscode -c "source /usr/local/share/nvm/nvm.sh && nvm install ${NODE_VERSION} 2>&1"; fi
 
 # [Optional] If your pip requirements rarely change, uncomment this section to add them to the image.
 # COPY requirements.txt /tmp/pip-tmp/

.devcontainer/devcontainer.json

@@ -5,7 +5,10 @@
 		"context": "..",
 		"args": { 
 			// Update 'VARIANT' to pick a Python version: 3, 3.6, 3.7, 3.8, 3.9
-			"VARIANT": "3"
+			"VARIANT": "3",
+			// Options
+			"INSTALL_NODE": "true",
+			"NODE_VERSION": "lts/*"
 		}
 	},
 
@@ -24,35 +27,34 @@
 	// risk to running the build directly on the host.
 	// "runArgs": ["--privileged", "-v", "/dev/bus/usb:/dev/bus/usb", "--group-add", "dialout"],
 
-	"customizations": {
-		"vscode": {
-			"settings": { 
-				"terminal.integrated.shell.linux": "/bin/bash",
-				"python.pythonPath": "/usr/local/bin/python",
-				"python.linting.enabled": true,
-				"python.linting.pylintEnabled": true,
-				"python.formatting.autopep8Path": "/usr/local/py-utils/bin/autopep8",
-				"python.formatting.blackPath": "/usr/local/py-utils/bin/black",
-				"python.formatting.yapfPath": "/usr/local/py-utils/bin/yapf",
-				"python.linting.banditPath": "/usr/local/py-utils/bin/bandit",
-				"python.linting.flake8Path": "/usr/local/py-utils/bin/flake8",
-				"python.linting.mypyPath": "/usr/local/py-utils/bin/mypy",
-				"python.linting.pycodestylePath": "/usr/local/py-utils/bin/pycodestyle",
-				"python.linting.pydocstylePath": "/usr/local/py-utils/bin/pydocstyle",
-				"python.linting.pylintPath": "/usr/local/py-utils/bin/pylint"
-			},
-			"extensions": [
-				"ms-python.python",
-				"platformio.platformio-ide"
-			]
-		}
+	// Set *default* container specific settings.json values on container create.
+	"settings": { 
+		"terminal.integrated.shell.linux": "/bin/bash",
+		"python.pythonPath": "/usr/local/bin/python",
+		"python.linting.enabled": true,
+		"python.linting.pylintEnabled": true,
+		"python.formatting.autopep8Path": "/usr/local/py-utils/bin/autopep8",
+		"python.formatting.blackPath": "/usr/local/py-utils/bin/black",
+		"python.formatting.yapfPath": "/usr/local/py-utils/bin/yapf",
+		"python.linting.banditPath": "/usr/local/py-utils/bin/bandit",
+		"python.linting.flake8Path": "/usr/local/py-utils/bin/flake8",
+		"python.linting.mypyPath": "/usr/local/py-utils/bin/mypy",
+		"python.linting.pycodestylePath": "/usr/local/py-utils/bin/pycodestyle",
+		"python.linting.pydocstylePath": "/usr/local/py-utils/bin/pydocstyle",
+		"python.linting.pylintPath": "/usr/local/py-utils/bin/pylint"
 	},
 
+	// Add the IDs of extensions you want installed when the container is created.
+	"extensions": [
+		"ms-python.python",
+		"platformio.platformio-ide"
+	],
+
 	// Use 'forwardPorts' to make a list of ports inside the container available locally.
 	// "forwardPorts": [],
 
 	// Use 'postCreateCommand' to run commands after the container is created.
-	"postCreateCommand": "bash -i -c 'nvm install && npm ci'",
+	"postCreateCommand": "npm install",
 
 	// Comment out connect as root instead. More info: https://aka.ms/vscode-remote/containers/non-root.
 	"remoteUser": "vscode"

.github/ISSUE_TEMPLATE/bug.yml

@@ -80,7 +80,7 @@ body:
     id: terms
     attributes:
       label: Code of Conduct
-      description: By submitting this issue, you agree to follow our [Code of Conduct](https://github.com/wled-dev/WLED/blob/main/CODE_OF_CONDUCT.md)
+      description: By submitting this issue, you agree to follow our [Code of Conduct](https://github.com/Aircoookie/WLED/blob/master/CODE_OF_CONDUCT.md)
       options:
         - label: I agree to follow this project's Code of Conduct
           required: true

.github/workflows/build.yml

@@ -26,7 +26,7 @@ jobs:
 
 
   build:
-    name: Build Environments
+    name: Build Enviornments
     runs-on: ubuntu-latest
     needs: get_default_envs
     strategy:
@@ -38,7 +38,6 @@ jobs:
     - name: Set up Node.js
       uses: actions/setup-node@v4
       with:
-        node-version-file: '.nvmrc'
         cache: 'npm'
     - run: npm ci
     - name: Cache PlatformIO
@@ -57,7 +56,6 @@ jobs:
           cache: 'pip'
     - name: Install PlatformIO
       run: pip install -r requirements.txt
-
     - name: Build firmware
       run: pio run -e ${{ matrix.environment }}
     - uses: actions/upload-artifact@v4
@@ -76,7 +74,7 @@ jobs:
       - name: Use Node.js
         uses: actions/setup-node@v4
         with:
-          node-version-file: '.nvmrc'
+          node-version: '20.x'
           cache: 'npm'
       - run: npm ci
       - run: npm test

.github/workflows/nightly.yml

@@ -1,47 +0,0 @@
-
-name: Deploy Nightly
-on:
-  # This can be used to automatically publish nightlies at UTC nighttime
-  schedule:
-    - cron: '0 2 * * *' # run at 2 AM UTC
-  # This can be used to allow manually triggering nightlies from the web interface
-  workflow_dispatch:
-
-jobs:
-  wled_build:
-    uses: ./.github/workflows/build.yml
-  nightly:
-    name: Deploy nightly
-    runs-on: ubuntu-latest
-    needs: wled_build
-    steps:
-      - name: Download artifacts
-        uses: actions/download-artifact@v4
-        with:
-          merge-multiple: true
-      - name: Show Files
-        run: ls -la
-      - name: "✏️ Generate release changelog"
-        id: changelog
-        uses: janheinrichmerker/action-github-changelog-generator@v2.3
-        with:
-          token: ${{ secrets.GITHUB_TOKEN }} 
-          sinceTag: v0.15.0
-      - name: Update Nightly Release
-        uses: andelf/nightly-release@main
-        env:
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-        with:
-          tag_name: nightly
-          name: 'Nightly Release $$'
-          prerelease: true
-          body: ${{ steps.changelog.outputs.changelog }}
-          files: |
-            *.bin
-            *.bin.gz
-      - name: Repository Dispatch
-        uses: peter-evans/repository-dispatch@v3
-        with:
-          repository: wled/WLED-WebInstaller
-          event-type: release-nightly
-          token: ${{ secrets.PAT_PUBLIC }}

.github/workflows/pr-merge.yaml

@@ -1,16 +0,0 @@
-    name: Notify Discord on PR Merge
-    on:
-      pull_request:
-        types: [closed]
-
-    jobs:
-      notify:
-        runs-on: ubuntu-latest
-        steps:
-        - name: Send Discord notification
-          shell: bash
-          env:
-            DISCORD_WEBHOOK_BETA_TESTERS: ${{ secrets.DISCORD_WEBHOOK_BETA_TESTERS }}
-          if: github.event.pull_request.merged == true
-          run: |
-            curl -H "Content-Type: application/json" -d '{"content": "Pull Request #{{ github.event.pull_request.number }} merged by {{ github.actor }}"}' $DISCORD_WEBHOOK_BETA_TESTERS

.github/workflows/release.yml

@@ -18,16 +18,9 @@ jobs:
     - uses: actions/download-artifact@v4
       with:
         merge-multiple: true
-    - name: "✏️ Generate release changelog"
-      id: changelog
-      uses: janheinrichmerker/action-github-changelog-generator@v2.3
-      with:
-          token: ${{ secrets.GITHUB_TOKEN }} 
-          sinceTag: v0.15.0        
     - name: Create draft release
       uses: softprops/action-gh-release@v1
       with:
-        body: ${{ steps.changelog.outputs.changelog }}
         draft: True
         files: |
           *.bin

.github/workflows/test.yaml

@@ -1,13 +0,0 @@
-on:
-  workflow_dispatch:
-
-jobs:
-  dispatch:
-    runs-on: ubuntu-latest
-    steps:
-      - name: Repository Dispatch
-        uses: peter-evans/repository-dispatch@v3
-        with:
-          repository: wled/WLED-WebInstaller
-          event-type: release-nightly
-          token: ${{ secrets.PAT_PUBLIC }}

.gitignore

@@ -15,7 +15,6 @@ wled-update.sh
 
 /build_output/
 /node_modules/
-/logs/
 
 /wled00/extLibs
 /wled00/LittleFS

.nvmrc

@@ -1 +0,0 @@
-20.18

CHANGELOG.md

@@ -1,5 +1,23 @@
 ## WLED changelog
 
+#### Build 2412100
+-   WLED 0.15.0 release
+-   Usermod BME280: Fix "Unit of Measurement" for temperature
+-   WiFi reconnect bugfix (@blazoncek)
+
+#### Build 2411250
+-   WLED 0.15.0-rc1 release
+-   Add support for esp32S3_wroom2 (#4243 by @softhack007)
+-   Fix mixed LED SK6812 and ws2812b booloop (#4301 by @willmmiles)
+-   Improved FPS calculation (by DedeHai)
+-   Fix crashes when using HTTP API within MQTT (#4269 by @willmmiles)
+-   Fix array overflow in exploding_fireworks (#4120 by @willmmiles)
+-   Fix MQTT topic buffer length (#4293 by @WouterGritter)
+-   Fix SparkFunDMX fix for possible array bounds violation in DMX.write (by @softhack007)
+-   Allow TV Simulator on single LED segments (by @softhack007)
+-   Fix WLED_RELEASE_NAME (by @netmindz)
+
+
 #### Build 2410270
 -   WLED 0.15.0-b7 release
 -   Re-license the WLED project from MIT to EUPL (#4194 by @Aircoookie)
@@ -173,7 +191,7 @@
 -   v0.15.0-b2
 -   WS2805 support (RGB + WW + CW, 600kbps)
 -   Unified PSRAM use
--   NeoPixelBus v2.7.9 (for future WS2805 support)
+-   NeoPixelBus v2.7.9
 -   Ubiquitous PSRAM mode for all variants of ESP32
 -   SSD1309_64 I2C Support for FLD Usermod (#3836 by @THATDONFC)
 -   Palette cycling fix (add support for `{"seg":[{"pal":"X~Y~"}]}` or `{"seg":[{"pal":"X~Yr"}]}`)

CONTRIBUTING.md

@@ -14,7 +14,7 @@ A good description helps us to review and understand your proposed changes. For
 
 ### Target branch for pull requests
 
-Please make all PRs against the `main` branch.
+Please make all PRs against the `0_15` branch.
 
 ### Updating your code
 While the PR is open - and under review by maintainers - you may be asked to modify your PR source code.
@@ -27,7 +27,7 @@ Github will pick up the changes so your PR stays up-to-date.
 > For example, we regularly lost review comments when the PR author force-pushes code changes. So, pretty please, do not force-push.
 
 
-You can find a collection of very useful tips and tricks here: https://github.com/wled-dev/WLED/wiki/How-to-properly-submit-a-PR
+You can find a collection of very useful tips and tricks here: https://github.com/Aircoookie/WLED/wiki/How-to-properly-submit-a-PR
 
 
 ### Code style
@@ -105,4 +105,4 @@ Good:
 
 There is no hard character limit for a comment within a line,
 though as a rule of thumb consider wrapping after 120 characters.
-Inline comments are OK if they describe that line only and are not exceedingly wide.
+Inline comments are OK if they describe that line only and are not exceedingly wide.

boards/lolin_s3_mini.json

@@ -1,47 +0,0 @@
-{
-    "build": {
-      "arduino": {
-        "ldscript": "esp32s3_out.ld",
-        "memory_type": "qio_qspi"
-      },
-      "core": "esp32",
-      "extra_flags": [
-        "-DBOARD_HAS_PSRAM",
-        "-DARDUINO_LOLIN_S3_MINI",
-        "-DARDUINO_USB_MODE=1"
-      ],
-      "f_cpu": "240000000L",
-      "f_flash": "80000000L",
-      "flash_mode": "qio",
-      "hwids": [
-        [
-          "0x303A",
-          "0x8167"
-        ]
-      ],
-      "mcu": "esp32s3",
-      "variant": "lolin_s3_mini"
-    },
-    "connectivity": [
-      "bluetooth",
-      "wifi"
-    ],
-    "debug": {
-      "openocd_target": "esp32s3.cfg"
-    },
-    "frameworks": [
-      "arduino",
-      "espidf"
-    ],
-    "name": "WEMOS LOLIN S3 Mini",
-    "upload": {
-      "flash_size": "4MB",
-      "maximum_ram_size": 327680,
-      "maximum_size": 4194304,
-      "require_upload_port": true,
-      "speed": 460800
-    },
-    "url": "https://www.wemos.cc/en/latest/s3/index.html",
-    "vendor": "WEMOS"
-}
-  

lib/ESP8266PWM/src/core_esp8266_waveform_phase.cpp

@@ -1,504 +0,0 @@
-/* esp8266_waveform imported from platform source code
-   Modified for WLED to work around a fault in the NMI handling,
-   which can result in the system locking up and hard WDT crashes.
-
-   Imported from https://github.com/esp8266/Arduino/blob/7e0d20e2b9034994f573a236364e0aef17fd66de/cores/esp8266/core_esp8266_waveform_phase.cpp
-*/
-
-
-/*
-  esp8266_waveform - General purpose waveform generation and control,
-                     supporting outputs on all pins in parallel.
-
-  Copyright (c) 2018 Earle F. Philhower, III.  All rights reserved.
-  Copyright (c) 2020 Dirk O. Kaar.
-
-  The core idea is to have a programmable waveform generator with a unique
-  high and low period (defined in microseconds or CPU clock cycles).  TIMER1 is
-  set to 1-shot mode and is always loaded with the time until the next edge
-  of any live waveforms.
-
-  Up to one waveform generator per pin supported.
-
-  Each waveform generator is synchronized to the ESP clock cycle counter, not the
-  timer.  This allows for removing interrupt jitter and delay as the counter
-  always increments once per 80MHz clock.  Changes to a waveform are
-  contiguous and only take effect on the next waveform transition,
-  allowing for smooth transitions.
-
-  This replaces older tone(), analogWrite(), and the Servo classes.
-
-  Everywhere in the code where "ccy" or "ccys" is used, it means ESP.getCycleCount()
-  clock cycle time, or an interval measured in clock cycles, but not TIMER1
-  cycles (which may be 2 CPU clock cycles @ 160MHz).
-
-  This library is free software; you can redistribute it and/or
-  modify it under the terms of the GNU Lesser General Public
-  License as published by the Free Software Foundation; either
-  version 2.1 of the License, or (at your option) any later version.
-
-  This library is distributed in the hope that it will be useful,
-  but WITHOUT ANY WARRANTY; without even the implied warranty of
-  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-  Lesser General Public License for more details.
-
-  You should have received a copy of the GNU Lesser General Public
-  License along with this library; if not, write to the Free Software
-  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-*/
-
-#include "core_esp8266_waveform.h"
-#include <Arduino.h>
-#include "debug.h"
-#include "ets_sys.h"
-#include <atomic>
-
-
-// ----- @willmmiles begin patch -----
-// Linker magic
-extern "C" void usePWMFixedNMI(void) {};
-
-// NMI crash workaround
-// Sometimes the NMI fails to return, stalling the CPU.  When this happens,
-// the next NMI gets a return address /inside the NMI handler function/.
-// We work around this by caching the last NMI return address, and restoring
-// the epc3 and eps3 registers to the previous values if the observed epc3
-// happens to be pointing to the _NMILevelVector function.
-extern "C" void _NMILevelVector();
-extern "C" void _UserExceptionVector_1(); // the next function after _NMILevelVector
-static inline IRAM_ATTR void nmiCrashWorkaround() {
-  static uintptr_t epc3_backup, eps3_backup;
-
-  uintptr_t epc3, eps3;
-  __asm__ __volatile__("rsr %0,epc3; rsr %1,eps3":"=a"(epc3),"=a" (eps3));
-  if ((epc3 < (uintptr_t) &_NMILevelVector) || (epc3 >= (uintptr_t) &_UserExceptionVector_1)) {
-    // Address is good; save backup
-    epc3_backup = epc3;
-    eps3_backup = eps3;
-  } else {
-    // Address is inside the NMI handler -- restore from backup
-    __asm__ __volatile__("wsr %0,epc3; wsr %1,eps3"::"a"(epc3_backup),"a"(eps3_backup));
-  }
-}
-// ----- @willmmiles end patch -----
-
-
-// No-op calls to override the PWM implementation
-extern "C" void _setPWMFreq_weak(uint32_t freq) { (void) freq; }
-extern "C" IRAM_ATTR bool _stopPWM_weak(int pin) { (void) pin; return false; }
-extern "C" bool _setPWM_weak(int pin, uint32_t val, uint32_t range) { (void) pin; (void) val; (void) range; return false; }
-
-
-// Timer is 80MHz fixed. 160MHz CPU frequency need scaling.
-constexpr bool ISCPUFREQ160MHZ = clockCyclesPerMicrosecond() == 160;
-// Maximum delay between IRQs, Timer1, <= 2^23 / 80MHz
-constexpr int32_t MAXIRQTICKSCCYS = microsecondsToClockCycles(10000);
-// Maximum servicing time for any single IRQ
-constexpr uint32_t ISRTIMEOUTCCYS = microsecondsToClockCycles(18);
-// The latency between in-ISR rearming of the timer and the earliest firing
-constexpr int32_t IRQLATENCYCCYS = microsecondsToClockCycles(2);
-// The SDK and hardware take some time to actually get to our NMI code
-constexpr int32_t DELTAIRQCCYS = ISCPUFREQ160MHZ ?
-  microsecondsToClockCycles(2) >> 1 : microsecondsToClockCycles(2);
-
-// for INFINITE, the NMI proceeds on the waveform without expiry deadline.
-// for EXPIRES, the NMI expires the waveform automatically on the expiry ccy.
-// for UPDATEEXPIRY, the NMI recomputes the exact expiry ccy and transitions to EXPIRES.
-// for UPDATEPHASE, the NMI recomputes the target timings
-// for INIT, the NMI initializes nextPeriodCcy, and if expiryCcy != 0 includes UPDATEEXPIRY.
-enum class WaveformMode : uint8_t {INFINITE = 0, EXPIRES = 1, UPDATEEXPIRY = 2, UPDATEPHASE = 3, INIT = 4};
-
-// Waveform generator can create tones, PWM, and servos
-typedef struct {
-  uint32_t nextPeriodCcy; // ESP clock cycle when a period begins.
-  uint32_t endDutyCcy;    // ESP clock cycle when going from duty to off
-  int32_t dutyCcys;       // Set next off cycle at low->high to maintain phase
-  int32_t adjDutyCcys;    // Temporary correction for next period
-  int32_t periodCcys;     // Set next phase cycle at low->high to maintain phase
-  uint32_t expiryCcy;     // For time-limited waveform, the CPU clock cycle when this waveform must stop. If WaveformMode::UPDATE, temporarily holds relative ccy count
-  WaveformMode mode;
-  bool autoPwm;           // perform PWM duty to idle cycle ratio correction under high load at the expense of precise timings
-} Waveform;
-
-namespace {
-
-  static struct {
-    Waveform pins[17];             // State of all possible pins
-    uint32_t states = 0;           // Is the pin high or low, updated in NMI so no access outside the NMI code
-    uint32_t enabled = 0; // Is it actively running, updated in NMI so no access outside the NMI code
-
-    // Enable lock-free by only allowing updates to waveform.states and waveform.enabled from IRQ service routine
-    int32_t toSetBits = 0;     // Message to the NMI handler to start/modify exactly one waveform
-    int32_t toDisableBits = 0; // Message to the NMI handler to disable exactly one pin from waveform generation
-
-    // toSetBits temporaries
-    // cheaper than packing them in every Waveform, since we permit only one use at a time
-    uint32_t phaseCcy;      // positive phase offset ccy count  
-    int8_t alignPhase;      // < 0 no phase alignment, otherwise starts waveform in relative phase offset to given pin
-
-    uint32_t(*timer1CB)() = nullptr;
-
-    bool timer1Running = false;
-
-    uint32_t nextEventCcy;
-  } waveform;
-
-}
-
-// Interrupt on/off control
-static IRAM_ATTR void timer1Interrupt();
-
-// Non-speed critical bits
-#pragma GCC optimize ("Os")
-
-static void initTimer() {
-  timer1_disable();
-  ETS_FRC_TIMER1_INTR_ATTACH(NULL, NULL);
-  ETS_FRC_TIMER1_NMI_INTR_ATTACH(timer1Interrupt);
-  timer1_enable(TIM_DIV1, TIM_EDGE, TIM_SINGLE);
-  waveform.timer1Running = true;
-  timer1_write(IRQLATENCYCCYS); // Cause an interrupt post-haste
-}
-
-static void IRAM_ATTR deinitTimer() {
-  ETS_FRC_TIMER1_NMI_INTR_ATTACH(NULL);
-  timer1_disable();
-  timer1_isr_init();
-  waveform.timer1Running = false;
-}
-
-extern "C" {
-
-// Set a callback.  Pass in NULL to stop it
-void setTimer1Callback_weak(uint32_t (*fn)()) {
-  waveform.timer1CB = fn;
-  std::atomic_thread_fence(std::memory_order_acq_rel);
-  if (!waveform.timer1Running && fn) {
-    initTimer();
-  } else if (waveform.timer1Running && !fn && !waveform.enabled) {
-    deinitTimer();
-  }
-}
-
-// Start up a waveform on a pin, or change the current one.  Will change to the new
-// waveform smoothly on next low->high transition.  For immediate change, stopWaveform()
-// first, then it will immediately begin.
-int startWaveformClockCycles_weak(uint8_t pin, uint32_t highCcys, uint32_t lowCcys,
-  uint32_t runTimeCcys, int8_t alignPhase, uint32_t phaseOffsetCcys, bool autoPwm) {
-  uint32_t periodCcys = highCcys + lowCcys;
-  if (periodCcys < MAXIRQTICKSCCYS) {
-    if (!highCcys) {
-      periodCcys = (MAXIRQTICKSCCYS / periodCcys) * periodCcys;
-    }
-    else if (!lowCcys) {
-      highCcys = periodCcys = (MAXIRQTICKSCCYS / periodCcys) * periodCcys;
-    }
-  }
-  // sanity checks, including mixed signed/unsigned arithmetic safety
-  if ((pin > 16) || isFlashInterfacePin(pin) || (alignPhase > 16) ||
-    static_cast<int32_t>(periodCcys) <= 0 ||
-    static_cast<int32_t>(highCcys) < 0 || static_cast<int32_t>(lowCcys) < 0) {
-    return false;
-  }
-  Waveform& wave = waveform.pins[pin];
-  wave.dutyCcys = highCcys;
-  wave.adjDutyCcys = 0;
-  wave.periodCcys = periodCcys;
-  wave.autoPwm = autoPwm;
-  waveform.alignPhase = (alignPhase < 0) ? -1 : alignPhase;
-  waveform.phaseCcy = phaseOffsetCcys;
-
-  std::atomic_thread_fence(std::memory_order_acquire);
-  const uint32_t pinBit = 1UL << pin;
-  if (!(waveform.enabled & pinBit)) {
-    // wave.nextPeriodCcy and wave.endDutyCcy are initialized by the ISR
-    wave.expiryCcy = runTimeCcys; // in WaveformMode::INIT, temporarily hold relative cycle count
-    wave.mode = WaveformMode::INIT;
-    if (!wave.dutyCcys) {
-      // If initially at zero duty cycle, force GPIO off
-      if (pin == 16) {
-        GP16O = 0;
-      }
-      else {
-        GPOC = pinBit;
-      }
-    }
-    std::atomic_thread_fence(std::memory_order_release);
-    waveform.toSetBits = 1UL << pin;
-    std::atomic_thread_fence(std::memory_order_release);
-    if (!waveform.timer1Running) {
-      initTimer();
-    }
-    else if (T1V > IRQLATENCYCCYS) {
-      // Must not interfere if Timer is due shortly
-      timer1_write(IRQLATENCYCCYS);
-    }
-  }
-  else {
-    wave.mode = WaveformMode::INFINITE; // turn off possible expiry to make update atomic from NMI
-    std::atomic_thread_fence(std::memory_order_release);
-    if (runTimeCcys) {
-      wave.expiryCcy = runTimeCcys; // in WaveformMode::UPDATEEXPIRY, temporarily hold relative cycle count
-      wave.mode = WaveformMode::UPDATEEXPIRY;
-      std::atomic_thread_fence(std::memory_order_release);
-      waveform.toSetBits = 1UL << pin;
-    } else if (alignPhase >= 0) {
-      // @willmmiles new feature
-      wave.mode = WaveformMode::UPDATEPHASE; // recalculate start
-      std::atomic_thread_fence(std::memory_order_release);
-      waveform.toSetBits = 1UL << pin;
-    }
-  }
-  std::atomic_thread_fence(std::memory_order_acq_rel);
-  while (waveform.toSetBits) {
-    esp_yield(); // Wait for waveform to update
-    std::atomic_thread_fence(std::memory_order_acquire);
-  }
-  return true;
-}
-
-// Stops a waveform on a pin
-IRAM_ATTR int stopWaveform_weak(uint8_t pin) {
-  // Can't possibly need to stop anything if there is no timer active
-  if (!waveform.timer1Running) {
-    return false;
-  }
-  // If user sends in a pin >16 but <32, this will always point to a 0 bit
-  // If they send >=32, then the shift will result in 0 and it will also return false
-  std::atomic_thread_fence(std::memory_order_acquire);
-  const uint32_t pinBit = 1UL << pin;
-  if (waveform.enabled & pinBit) {
-    waveform.toDisableBits = 1UL << pin;
-    std::atomic_thread_fence(std::memory_order_release);
-    // Must not interfere if Timer is due shortly
-    if (T1V > IRQLATENCYCCYS) {
-      timer1_write(IRQLATENCYCCYS);
-    }
-    while (waveform.toDisableBits) {
-      /* no-op */ // Can't delay() since stopWaveform may be called from an IRQ
-      std::atomic_thread_fence(std::memory_order_acquire);
-    }
-  }
-  if (!waveform.enabled && !waveform.timer1CB) {
-    deinitTimer();
-  }
-  return true;
-}
-
-};
-
-// Speed critical bits
-#pragma GCC optimize ("O2")
-
-// For dynamic CPU clock frequency switch in loop the scaling logic would have to be adapted.
-// Using constexpr makes sure that the CPU clock frequency is compile-time fixed.
-static inline IRAM_ATTR int32_t scaleCcys(const int32_t ccys, const bool isCPU2X) {
-  if (ISCPUFREQ160MHZ) {
-    return isCPU2X ? ccys : (ccys >> 1);
-  }
-  else {
-    return isCPU2X ? (ccys << 1) : ccys;
-  }
-}
-
-static IRAM_ATTR void timer1Interrupt() {
-  const uint32_t isrStartCcy = ESP.getCycleCount();
-  //int32_t clockDrift = isrStartCcy - waveform.nextEventCcy;
-
-  // ----- @willmmiles begin patch -----
-  nmiCrashWorkaround();
-  // ----- @willmmiles end patch -----
-
-  const bool isCPU2X = CPU2X & 1;
-  if ((waveform.toSetBits && !(waveform.enabled & waveform.toSetBits)) || waveform.toDisableBits) {
-    // Handle enable/disable requests from main app.
-    waveform.enabled = (waveform.enabled & ~waveform.toDisableBits) | waveform.toSetBits; // Set the requested waveforms on/off
-    // Find the first GPIO being generated by checking GCC's find-first-set (returns 1 + the bit of the first 1 in an int32_t)
-    waveform.toDisableBits = 0;
-  }
-
-  if (waveform.toSetBits) {
-    const int toSetPin = __builtin_ffs(waveform.toSetBits) - 1;
-    Waveform& wave = waveform.pins[toSetPin];
-    switch (wave.mode) {
-    case WaveformMode::INIT:
-      waveform.states &= ~waveform.toSetBits; // Clear the state of any just started
-      if (waveform.alignPhase >= 0 && waveform.enabled & (1UL << waveform.alignPhase)) {
-        wave.nextPeriodCcy = waveform.pins[waveform.alignPhase].nextPeriodCcy + scaleCcys(waveform.phaseCcy, isCPU2X);
-      }
-      else {
-        wave.nextPeriodCcy = waveform.nextEventCcy;
-      }
-      if (!wave.expiryCcy) {
-        wave.mode = WaveformMode::INFINITE;
-        break;
-      }
-      // fall through
-    case WaveformMode::UPDATEEXPIRY:
-      // in WaveformMode::UPDATEEXPIRY, expiryCcy temporarily holds relative CPU cycle count
-      wave.expiryCcy = wave.nextPeriodCcy + scaleCcys(wave.expiryCcy, isCPU2X);
-      wave.mode = WaveformMode::EXPIRES;
-      break;
-    // @willmmiles new feature
-    case WaveformMode::UPDATEPHASE:
-      // in WaveformMode::UPDATEPHASE, we recalculate the targets
-      if ((waveform.alignPhase >= 0) && (waveform.enabled & (1UL << waveform.alignPhase))) {
-        // Compute phase shift to realign with target
-        auto const newPeriodCcy = waveform.pins[waveform.alignPhase].nextPeriodCcy + scaleCcys(waveform.phaseCcy, isCPU2X);
-        auto const period = scaleCcys(wave.periodCcys, isCPU2X);
-        auto shift = ((static_cast<int32_t> (newPeriodCcy - wave.nextPeriodCcy) + period/2) % period) - (period/2);
-        wave.nextPeriodCcy += static_cast<uint32_t>(shift);
-        if (static_cast<int32_t>(wave.endDutyCcy - wave.nextPeriodCcy) > 0) {
-          wave.endDutyCcy = wave.nextPeriodCcy;
-        }
-      }
-    default:
-      break;
-    }
-    waveform.toSetBits = 0;
-  }
-
-  // Exit the loop if the next event, if any, is sufficiently distant.
-  const uint32_t isrTimeoutCcy = isrStartCcy + ISRTIMEOUTCCYS;
-  uint32_t busyPins = waveform.enabled;
-  waveform.nextEventCcy = isrStartCcy + MAXIRQTICKSCCYS;
-
-  uint32_t now = ESP.getCycleCount();
-  uint32_t isrNextEventCcy = now;
-  while (busyPins) {
-    if (static_cast<int32_t>(isrNextEventCcy - now) > IRQLATENCYCCYS) {
-      waveform.nextEventCcy = isrNextEventCcy;
-      break;
-    }
-    isrNextEventCcy = waveform.nextEventCcy;
-    uint32_t loopPins = busyPins;
-    while (loopPins) {
-      const int pin = __builtin_ffsl(loopPins) - 1;
-      const uint32_t pinBit = 1UL << pin;
-      loopPins ^= pinBit;
-
-      Waveform& wave = waveform.pins[pin];
-
-/* @willmmiles - wtf?  We don't want to accumulate drift
-      if (clockDrift) {
-        wave.endDutyCcy += clockDrift;
-        wave.nextPeriodCcy += clockDrift;
-        wave.expiryCcy += clockDrift;
-      }
-*/          
-
-      uint32_t waveNextEventCcy = (waveform.states & pinBit) ? wave.endDutyCcy : wave.nextPeriodCcy;
-      if (WaveformMode::EXPIRES == wave.mode &&
-        static_cast<int32_t>(waveNextEventCcy - wave.expiryCcy) >= 0 &&
-        static_cast<int32_t>(now - wave.expiryCcy) >= 0) {
-        // Disable any waveforms that are done
-        waveform.enabled ^= pinBit;
-        busyPins ^= pinBit;
-      }
-      else {
-        const int32_t overshootCcys = now - waveNextEventCcy;
-        if (overshootCcys >= 0) {
-          const int32_t periodCcys = scaleCcys(wave.periodCcys, isCPU2X);
-          if (waveform.states & pinBit) {
-            // active configuration and forward are 100% duty
-            if (wave.periodCcys == wave.dutyCcys) {
-              wave.nextPeriodCcy += periodCcys;
-              wave.endDutyCcy = wave.nextPeriodCcy;
-            }
-            else {
-              if (wave.autoPwm) {
-                wave.adjDutyCcys += overshootCcys;
-              }
-              waveform.states ^= pinBit;
-              if (16 == pin) {
-                GP16O = 0;
-              }
-              else {
-                GPOC = pinBit;
-              }
-            }
-            waveNextEventCcy = wave.nextPeriodCcy;
-          }
-          else {
-            wave.nextPeriodCcy += periodCcys;
-            if (!wave.dutyCcys) {
-              wave.endDutyCcy = wave.nextPeriodCcy;
-            }
-            else {
-              int32_t dutyCcys = scaleCcys(wave.dutyCcys, isCPU2X);
-              if (dutyCcys <= wave.adjDutyCcys) {
-                dutyCcys >>= 1;
-                wave.adjDutyCcys -= dutyCcys;
-              }
-              else if (wave.adjDutyCcys) {
-                dutyCcys -= wave.adjDutyCcys;
-                wave.adjDutyCcys = 0;
-              }
-              wave.endDutyCcy = now + dutyCcys;
-              if (static_cast<int32_t>(wave.endDutyCcy - wave.nextPeriodCcy) > 0) {
-                wave.endDutyCcy = wave.nextPeriodCcy;
-              }
-              waveform.states |= pinBit;
-              if (16 == pin) {
-                GP16O = 1;
-              }
-              else {
-                GPOS = pinBit;
-              }
-            }
-            waveNextEventCcy = wave.endDutyCcy;
-          }
-
-          if (WaveformMode::EXPIRES == wave.mode && static_cast<int32_t>(waveNextEventCcy - wave.expiryCcy) > 0) {
-            waveNextEventCcy = wave.expiryCcy;
-          }
-        }
-
-        if (static_cast<int32_t>(waveNextEventCcy - isrTimeoutCcy) >= 0) {
-          busyPins ^= pinBit;
-          if (static_cast<int32_t>(waveform.nextEventCcy - waveNextEventCcy) > 0) {
-            waveform.nextEventCcy = waveNextEventCcy;
-          }
-        }
-        else if (static_cast<int32_t>(isrNextEventCcy - waveNextEventCcy) > 0) {
-          isrNextEventCcy = waveNextEventCcy;
-        }
-      }
-      now = ESP.getCycleCount();
-    }
-    //clockDrift = 0;
-  }
-
-  int32_t callbackCcys = 0;
-  if (waveform.timer1CB) {
-    callbackCcys = scaleCcys(waveform.timer1CB(), isCPU2X);
-  }
-  now = ESP.getCycleCount();
-  int32_t nextEventCcys = waveform.nextEventCcy - now;
-  // Account for unknown duration of timer1CB().
-  if (waveform.timer1CB && nextEventCcys > callbackCcys) {
-    waveform.nextEventCcy = now + callbackCcys;
-    nextEventCcys = callbackCcys;
-  }
-
-  // Timer is 80MHz fixed. 160MHz CPU frequency need scaling.
-  int32_t deltaIrqCcys = DELTAIRQCCYS;
-  int32_t irqLatencyCcys = IRQLATENCYCCYS;
-  if (isCPU2X) {
-    nextEventCcys >>= 1;
-    deltaIrqCcys >>= 1;
-    irqLatencyCcys >>= 1;
-  }
-
-  // Firing timer too soon, the NMI occurs before ISR has returned.
-  if (nextEventCcys < irqLatencyCcys + deltaIrqCcys) {
-    waveform.nextEventCcy = now + IRQLATENCYCCYS + DELTAIRQCCYS;
-    nextEventCcys = irqLatencyCcys;
-  }
-  else {
-    nextEventCcys -= deltaIrqCcys;
-  }
-
-  // Register access is fast and edge IRQ was configured before.
-  T1L = nextEventCcys;
-}

lib/ESP8266PWM/src/core_esp8266_waveform_pwm.cpp

@@ -0,0 +1,717 @@
+/* esp8266_waveform imported from platform source code
+   Modified for WLED to work around a fault in the NMI handling,
+   which can result in the system locking up and hard WDT crashes.
+
+   Imported from https://github.com/esp8266/Arduino/blob/7e0d20e2b9034994f573a236364e0aef17fd66de/cores/esp8266/core_esp8266_waveform_pwm.cpp
+*/
+
+/*
+  esp8266_waveform - General purpose waveform generation and control,
+                     supporting outputs on all pins in parallel.
+
+  Copyright (c) 2018 Earle F. Philhower, III.  All rights reserved.
+
+  The core idea is to have a programmable waveform generator with a unique
+  high and low period (defined in microseconds or CPU clock cycles).  TIMER1
+  is set to 1-shot mode and is always loaded with the time until the next
+  edge of any live waveforms.
+
+  Up to one waveform generator per pin supported.
+
+  Each waveform generator is synchronized to the ESP clock cycle counter, not
+  the timer.  This allows for removing interrupt jitter and delay as the
+  counter always increments once per 80MHz clock.  Changes to a waveform are
+  contiguous and only take effect on the next waveform transition,
+  allowing for smooth transitions.
+
+  This replaces older tone(), analogWrite(), and the Servo classes.
+
+  Everywhere in the code where "cycles" is used, it means ESP.getCycleCount()
+  clock cycle count, or an interval measured in CPU clock cycles, but not
+  TIMER1 cycles (which may be 2 CPU clock cycles @ 160MHz).
+
+  This library is free software; you can redistribute it and/or
+  modify it under the terms of the GNU Lesser General Public
+  License as published by the Free Software Foundation; either
+  version 2.1 of the License, or (at your option) any later version.
+
+  This library is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+  Lesser General Public License for more details.
+
+  You should have received a copy of the GNU Lesser General Public
+  License along with this library; if not, write to the Free Software
+  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+*/
+
+
+#include <Arduino.h>
+#include <coredecls.h>
+#include "ets_sys.h"
+#include "core_esp8266_waveform.h"
+#include "user_interface.h"
+
+extern "C" {
+
+// Linker magic
+void usePWMFixedNMI() {};
+
+// Maximum delay between IRQs
+#define MAXIRQUS (10000)
+
+// Waveform generator can create tones, PWM, and servos
+typedef struct {
+  uint32_t nextServiceCycle;   // ESP cycle timer when a transition required
+  uint32_t expiryCycle;        // For time-limited waveform, the cycle when this waveform must stop
+  uint32_t timeHighCycles;     // Actual running waveform period (adjusted using desiredCycles)
+  uint32_t timeLowCycles;      //
+  uint32_t desiredHighCycles;  // Ideal waveform period to drive the error signal
+  uint32_t desiredLowCycles;   //
+  uint32_t lastEdge;           // Cycle when this generator last changed
+} Waveform;
+
+class WVFState {
+public:
+  Waveform waveform[17];        // State of all possible pins
+  uint32_t waveformState = 0;   // Is the pin high or low, updated in NMI so no access outside the NMI code
+  uint32_t waveformEnabled = 0; // Is it actively running, updated in NMI so no access outside the NMI code
+
+  // Enable lock-free by only allowing updates to waveformState and waveformEnabled from IRQ service routine
+  uint32_t waveformToEnable = 0;  // Message to the NMI handler to start a waveform on a inactive pin
+  uint32_t waveformToDisable = 0; // Message to the NMI handler to disable a pin from waveform generation
+
+  uint32_t waveformToChange = 0; // Mask of pin to change. One bit set in main app, cleared when effected in the NMI
+  uint32_t waveformNewHigh = 0;
+  uint32_t waveformNewLow = 0;
+
+  uint32_t (*timer1CB)() = NULL;
+
+  // Optimize the NMI inner loop by keeping track of the min and max GPIO that we
+  // are generating.  In the common case (1 PWM) these may be the same pin and
+  // we can avoid looking at the other pins.
+  uint16_t startPin = 0;
+  uint16_t endPin = 0;
+};
+static WVFState wvfState;
+
+
+// Ensure everything is read/written to RAM
+#define MEMBARRIER() { __asm__ volatile("" ::: "memory"); }
+
+// Non-speed critical bits
+#pragma GCC optimize ("Os")
+
+// Interrupt on/off control
+static IRAM_ATTR void timer1Interrupt();
+static bool timerRunning = false;
+
+static __attribute__((noinline)) void initTimer() {
+  if (!timerRunning) {
+    timer1_disable();
+    ETS_FRC_TIMER1_INTR_ATTACH(NULL, NULL);
+    ETS_FRC_TIMER1_NMI_INTR_ATTACH(timer1Interrupt);
+    timer1_enable(TIM_DIV1, TIM_EDGE, TIM_SINGLE);
+    timerRunning = true;
+    timer1_write(microsecondsToClockCycles(10));
+  }
+}
+
+static IRAM_ATTR void forceTimerInterrupt() {
+  if (T1L > microsecondsToClockCycles(10)) {
+    T1L = microsecondsToClockCycles(10);
+  }
+}
+
+// PWM implementation using special purpose state machine
+//
+// Keep an ordered list of pins with the delta in cycles between each
+// element, with a terminal entry making up the remainder of the PWM
+// period.  With this method sum(all deltas) == PWM period clock cycles.
+//
+// At t=0 set all pins high and set the timeout for the 1st edge.
+// On interrupt, if we're at the last element reset to t=0 state
+// Otherwise, clear that pin down and set delay for next element
+// and so forth.
+
+constexpr int maxPWMs = 8;
+
+// PWM machine state
+typedef struct PWMState {
+  uint32_t mask; // Bitmask of active pins
+  uint32_t cnt;  // How many entries
+  uint32_t idx;  // Where the state machine is along the list
+  uint8_t  pin[maxPWMs + 1];
+  uint32_t delta[maxPWMs + 1];
+  uint32_t nextServiceCycle;  // Clock cycle for next step
+  struct PWMState *pwmUpdate; // Set by main code, cleared by ISR
+} PWMState;
+
+static PWMState pwmState;
+static uint32_t _pwmFreq = 1000;
+static uint32_t _pwmPeriod = microsecondsToClockCycles(1000000UL) / _pwmFreq;
+
+
+// If there are no more scheduled activities, shut down Timer 1.
+// Otherwise, do nothing.
+static IRAM_ATTR void disableIdleTimer() {
+ if (timerRunning && !wvfState.waveformEnabled && !pwmState.cnt && !wvfState.timer1CB) {
+    ETS_FRC_TIMER1_NMI_INTR_ATTACH(NULL);
+    timer1_disable();
+    timer1_isr_init();
+    timerRunning = false;
+  }
+}
+
+// Notify the NMI that a new PWM state is available through the mailbox.
+// Wait for mailbox to be emptied (either busy or delay() as needed)
+static IRAM_ATTR void _notifyPWM(PWMState *p, bool idle) {
+  p->pwmUpdate = nullptr;
+  pwmState.pwmUpdate = p;
+  MEMBARRIER();
+  forceTimerInterrupt();
+  while (pwmState.pwmUpdate) {
+    if (idle) {
+      esp_yield();
+    }
+    MEMBARRIER();
+  }
+}
+
+static void _addPWMtoList(PWMState &p, int pin, uint32_t val, uint32_t range);
+
+
+// Called when analogWriteFreq() changed to update the PWM total period
+//extern void _setPWMFreq_weak(uint32_t freq) __attribute__((weak)); 
+void _setPWMFreq_weak(uint32_t freq) {
+  _pwmFreq = freq;
+
+  // Convert frequency into clock cycles
+  uint32_t cc = microsecondsToClockCycles(1000000UL) / freq;
+
+  // Simple static adjustment to bring period closer to requested due to overhead
+  // Empirically determined as a constant PWM delay and a function of the number of PWMs
+#if F_CPU == 80000000
+  cc -= ((microsecondsToClockCycles(pwmState.cnt) * 13) >> 4) + 110;
+#else
+  cc -= ((microsecondsToClockCycles(pwmState.cnt) * 10) >> 4) + 75;
+#endif
+
+  if (cc == _pwmPeriod) {
+    return; // No change
+  }
+
+  _pwmPeriod = cc;
+
+  if (pwmState.cnt) {
+    PWMState p;  // The working copy since we can't edit the one in use
+    p.mask = 0;
+    p.cnt = 0;
+    for (uint32_t i = 0; i < pwmState.cnt; i++) {
+      auto pin = pwmState.pin[i];
+      _addPWMtoList(p, pin, wvfState.waveform[pin].desiredHighCycles, wvfState.waveform[pin].desiredLowCycles);
+    }
+    // Update and wait for mailbox to be emptied
+    initTimer();
+    _notifyPWM(&p, true);
+    disableIdleTimer();
+  }
+}
+/*
+static void _setPWMFreq_bound(uint32_t freq) __attribute__((weakref("_setPWMFreq_weak")));
+void _setPWMFreq(uint32_t freq) { 
+  _setPWMFreq_bound(freq);
+}
+*/
+
+// Helper routine to remove an entry from the state machine
+// and clean up any marked-off entries
+static void _cleanAndRemovePWM(PWMState *p, int pin) {
+  uint32_t leftover = 0;
+  uint32_t in, out;
+  for (in = 0, out = 0; in < p->cnt; in++) {
+    if ((p->pin[in] != pin) && (p->mask & (1<<p->pin[in]))) {
+        p->pin[out] = p->pin[in];
+        p->delta[out] = p->delta[in] + leftover;
+        leftover = 0;
+        out++;
+    } else {
+        leftover += p->delta[in];
+        p->mask &= ~(1<<p->pin[in]);
+    }
+  }
+  p->cnt = out;
+  // Final pin is never used: p->pin[out] = 0xff;
+  p->delta[out] = p->delta[in] + leftover;
+}
+
+
+// Disable PWM on a specific pin (i.e. when a digitalWrite or analogWrite(0%/100%))
+//extern bool _stopPWM_weak(uint8_t pin) __attribute__((weak));
+IRAM_ATTR bool _stopPWM_weak(uint8_t pin) {
+  if (!((1<<pin) & pwmState.mask)) {
+    return false; // Pin not actually active
+  }
+
+  PWMState p;  // The working copy since we can't edit the one in use
+  p = pwmState;
+
+  // In _stopPWM we just clear the mask but keep everything else
+  // untouched to save IRAM.  The main startPWM will handle cleanup.
+  p.mask &= ~(1<<pin);
+  if (!p.mask) {
+    // If all have been stopped, then turn PWM off completely
+    p.cnt = 0;
+  }
+
+  // Update and wait for mailbox to be emptied, no delay (could be in ISR)
+  _notifyPWM(&p, false);
+  // Possibly shut down the timer completely if we're done
+  disableIdleTimer();
+  return true;
+}
+/*
+static bool _stopPWM_bound(uint8_t pin) __attribute__((weakref("_stopPWM_weak")));
+IRAM_ATTR bool _stopPWM(uint8_t pin) {
+  return _stopPWM_bound(pin);
+}
+*/
+
+static void _addPWMtoList(PWMState &p, int pin, uint32_t val, uint32_t range) {
+  // Stash the val and range so we can re-evaluate the fraction
+  // should the user change PWM frequency.  This allows us to
+  // give as great a precision as possible.  We know by construction
+  // that the waveform for this pin will be inactive so we can borrow
+  // memory from that structure.
+  wvfState.waveform[pin].desiredHighCycles = val;  // Numerator == high
+  wvfState.waveform[pin].desiredLowCycles = range; // Denominator == low
+
+  uint32_t cc = (_pwmPeriod * val) / range;
+
+  // Clip to sane values in the case we go from OK to not-OK when adjusting frequencies
+  if (cc == 0) {
+    cc = 1;
+  } else if (cc >= _pwmPeriod) {
+    cc = _pwmPeriod - 1;
+  }
+
+  if (p.cnt == 0) {
+    // Starting up from scratch, special case 1st element and PWM period
+    p.pin[0] = pin;
+    p.delta[0] = cc;
+   // Final pin is never used: p.pin[1] = 0xff;
+    p.delta[1] = _pwmPeriod - cc;
+  } else {
+    uint32_t ttl = 0;
+    uint32_t i;
+    // Skip along until we're at the spot to insert
+    for (i=0; (i <= p.cnt) && (ttl + p.delta[i] < cc); i++) {
+      ttl += p.delta[i];
+    }
+    // Shift everything out by one to make space for new edge
+    for (int32_t j = p.cnt; j >= (int)i; j--) {
+      p.pin[j + 1] = p.pin[j];
+      p.delta[j + 1] = p.delta[j];
+    }
+    int off = cc - ttl; // The delta from the last edge to the one we're inserting
+    p.pin[i] = pin;
+    p.delta[i] = off; // Add the delta to this new pin
+    p.delta[i + 1] -= off; // And subtract it from the follower to keep sum(deltas) constant
+  }
+  p.cnt++;
+  p.mask |= 1<<pin;
+}
+
+// Called by analogWrite(1...99%) to set the PWM duty in clock cycles
+//extern bool _setPWM_weak(int pin, uint32_t val, uint32_t range) __attribute__((weak));
+bool _setPWM_weak(int pin, uint32_t val, uint32_t range) {
+  stopWaveform(pin);
+  PWMState p;  // Working copy
+  p = pwmState;
+  // Get rid of any entries for this pin
+  _cleanAndRemovePWM(&p, pin);
+  // And add it to the list, in order
+  if (p.cnt >= maxPWMs) {
+    return false; // No space left
+  }
+
+  // Sanity check for all-on/off
+  uint32_t cc = (_pwmPeriod * val) / range;
+  if ((cc == 0) || (cc >= _pwmPeriod)) {
+    digitalWrite(pin, cc ? HIGH : LOW);
+    return true;
+  }
+
+  _addPWMtoList(p, pin, val, range);
+
+  // Set mailbox and wait for ISR to copy it over
+  initTimer();
+  _notifyPWM(&p, true);
+  disableIdleTimer();
+
+  // Potentially recalculate the PWM period if we've added another pin
+  _setPWMFreq(_pwmFreq);
+
+  return true;
+}
+/*
+static bool _setPWM_bound(int pin, uint32_t val, uint32_t range) __attribute__((weakref("_setPWM_weak")));
+bool _setPWM(int pin, uint32_t val, uint32_t range) {
+  return _setPWM_bound(pin, val, range);
+}
+*/
+
+// Start up a waveform on a pin, or change the current one.  Will change to the new
+// waveform smoothly on next low->high transition.  For immediate change, stopWaveform()
+// first, then it will immediately begin.
+//extern int startWaveformClockCycles_weak(uint8_t pin, uint32_t timeHighCycles, uint32_t timeLowCycles, uint32_t runTimeCycles, int8_t alignPhase, uint32_t phaseOffsetUS, bool autoPwm)  __attribute__((weak));
+int startWaveformClockCycles_weak(uint8_t pin, uint32_t timeHighCycles, uint32_t timeLowCycles, uint32_t runTimeCycles,
+                             int8_t alignPhase, uint32_t phaseOffsetUS, bool autoPwm) {
+  (void) alignPhase;
+  (void) phaseOffsetUS;
+  (void) autoPwm;
+
+   if ((pin > 16) || isFlashInterfacePin(pin) || (timeHighCycles == 0)) {
+    return false;
+  }
+  Waveform *wave = &wvfState.waveform[pin];
+  wave->expiryCycle = runTimeCycles ? ESP.getCycleCount() + runTimeCycles : 0;
+  if (runTimeCycles && !wave->expiryCycle) {
+    wave->expiryCycle = 1; // expiryCycle==0 means no timeout, so avoid setting it
+  }
+
+  _stopPWM(pin); // Make sure there's no PWM live here
+
+  uint32_t mask = 1<<pin;
+  MEMBARRIER();
+  if (wvfState.waveformEnabled & mask) {
+    // Make sure no waveform changes are waiting to be applied
+    while (wvfState.waveformToChange) {
+      esp_yield(); // Wait for waveform to update
+      MEMBARRIER();
+    }
+    wvfState.waveformNewHigh = timeHighCycles;
+    wvfState.waveformNewLow = timeLowCycles;
+    MEMBARRIER();
+    wvfState.waveformToChange = mask;
+    // The waveform will be updated some time in the future on the next period for the signal
+  } else { //  if (!(wvfState.waveformEnabled & mask)) {
+    wave->timeHighCycles = timeHighCycles;
+    wave->desiredHighCycles = timeHighCycles;
+    wave->timeLowCycles = timeLowCycles;
+    wave->desiredLowCycles = timeLowCycles;
+    wave->lastEdge = 0;
+    wave->nextServiceCycle = ESP.getCycleCount() + microsecondsToClockCycles(1);
+    wvfState.waveformToEnable |= mask;
+    MEMBARRIER();
+    initTimer();
+    forceTimerInterrupt();
+    while (wvfState.waveformToEnable) {
+      esp_yield(); // Wait for waveform to update
+      MEMBARRIER();
+    }
+  }
+
+  return true;
+}
+/*
+static int startWaveformClockCycles_bound(uint8_t pin, uint32_t timeHighCycles, uint32_t timeLowCycles, uint32_t runTimeCycles, int8_t alignPhase, uint32_t phaseOffsetUS, bool autoPwm) __attribute__((weakref("startWaveformClockCycles_weak")));
+int startWaveformClockCycles(uint8_t pin, uint32_t timeHighCycles, uint32_t timeLowCycles, uint32_t runTimeCycles, int8_t alignPhase, uint32_t phaseOffsetUS, bool autoPwm) {
+  return startWaveformClockCycles_bound(pin, timeHighCycles, timeLowCycles, runTimeCycles, alignPhase, phaseOffsetUS, autoPwm);
+}
+
+
+// This version falls-thru to the proper startWaveformClockCycles call and is invariant across waveform generators
+int startWaveform(uint8_t pin, uint32_t timeHighUS, uint32_t timeLowUS, uint32_t runTimeUS,
+                  int8_t alignPhase, uint32_t phaseOffsetUS, bool autoPwm) {
+  return startWaveformClockCycles_bound(pin,
+    microsecondsToClockCycles(timeHighUS), microsecondsToClockCycles(timeLowUS),
+    microsecondsToClockCycles(runTimeUS), alignPhase, microsecondsToClockCycles(phaseOffsetUS), autoPwm);
+}
+*/
+
+// Set a callback.  Pass in NULL to stop it
+//extern void setTimer1Callback_weak(uint32_t (*fn)()) __attribute__((weak));
+void setTimer1Callback_weak(uint32_t (*fn)()) {
+  wvfState.timer1CB = fn;
+  if (fn) {
+    initTimer();
+    forceTimerInterrupt();
+  }
+  disableIdleTimer();
+}
+/*
+static void setTimer1Callback_bound(uint32_t (*fn)()) __attribute__((weakref("setTimer1Callback_weak")));
+void setTimer1Callback(uint32_t (*fn)()) {
+  setTimer1Callback_bound(fn);
+}
+*/
+
+// Stops a waveform on a pin
+//extern int stopWaveform_weak(uint8_t pin) __attribute__((weak));
+IRAM_ATTR int stopWaveform_weak(uint8_t pin) {
+  // Can't possibly need to stop anything if there is no timer active
+  if (!timerRunning) {
+    return false;
+  }
+  // If user sends in a pin >16 but <32, this will always point to a 0 bit
+  // If they send >=32, then the shift will result in 0 and it will also return false
+  uint32_t mask = 1<<pin;
+  if (wvfState.waveformEnabled & mask) {
+    wvfState.waveformToDisable = mask;
+    // Cancel any pending updates for this waveform, too.
+    if (wvfState.waveformToChange & mask) {
+        wvfState.waveformToChange = 0;
+    }
+    forceTimerInterrupt();
+    while (wvfState.waveformToDisable) {
+      MEMBARRIER(); // If it wasn't written yet, it has to be by now
+      /* no-op */ // Can't delay() since stopWaveform may be called from an IRQ
+    }
+  }
+  disableIdleTimer();
+  return true;
+}
+/*
+static int stopWaveform_bound(uint8_t pin) __attribute__((weakref("stopWaveform_weak")));
+IRAM_ATTR int stopWaveform(uint8_t pin) {
+  return stopWaveform_bound(pin);
+}
+*/
+
+// Speed critical bits
+#pragma GCC optimize ("O2")
+
+// Normally would not want two copies like this, but due to different
+// optimization levels the inline attribute gets lost if we try the
+// other version.
+static inline IRAM_ATTR uint32_t GetCycleCountIRQ() {
+  uint32_t ccount;
+  __asm__ __volatile__("rsr %0,ccount":"=a"(ccount));
+  return ccount;
+}
+
+// Find the earliest cycle as compared to right now
+static inline IRAM_ATTR uint32_t earliest(uint32_t a, uint32_t b) {
+    uint32_t now = GetCycleCountIRQ();
+    int32_t da = a - now;
+    int32_t db = b - now;
+    return (da < db) ? a : b;
+}
+
+// ----- @willmmiles begin patch -----
+// NMI crash workaround
+// Sometimes the NMI fails to return, stalling the CPU.  When this happens,
+// the next NMI gets a return address /inside the NMI handler function/.
+// We work around this by caching the last NMI return address, and restoring
+// the epc3 and eps3 registers to the previous values if the observed epc3
+// happens to be pointing to the _NMILevelVector function.
+extern void _NMILevelVector();
+extern void _UserExceptionVector_1(); // the next function after _NMILevelVector
+static inline IRAM_ATTR void nmiCrashWorkaround() {
+  static uintptr_t epc3_backup, eps3_backup;
+
+  uintptr_t epc3, eps3;
+  __asm__ __volatile__("rsr %0,epc3; rsr %1,eps3":"=a"(epc3),"=a" (eps3));
+  if ((epc3 < (uintptr_t) &_NMILevelVector) || (epc3 >= (uintptr_t) &_UserExceptionVector_1)) {
+    // Address is good; save backup
+    epc3_backup = epc3;
+    eps3_backup = eps3;
+  } else {
+    // Address is inside the NMI handler -- restore from backup
+    __asm__ __volatile__("wsr %0,epc3; wsr %1,eps3"::"a"(epc3_backup),"a"(eps3_backup));
+  }
+}
+// ----- @willmmiles end patch -----
+
+
+// The SDK and hardware take some time to actually get to our NMI code, so
+// decrement the next IRQ's timer value by a bit so we can actually catch the
+// real CPU cycle counter we want for the waveforms.
+
+// The SDK also sometimes is running at a different speed the the Arduino core
+// so the ESP cycle counter is actually running at a variable speed.
+// adjust(x) takes care of adjusting a delta clock cycle amount accordingly.
+#if F_CPU == 80000000
+  #define DELTAIRQ (microsecondsToClockCycles(9)/4)
+  #define adjust(x) ((x) << (turbo ? 1 : 0))
+#else
+  #define DELTAIRQ (microsecondsToClockCycles(9)/8)
+  #define adjust(x) ((x) >> 0)
+#endif
+
+// When the time to the next edge is greater than this, RTI and set another IRQ to minimize CPU usage
+#define MINIRQTIME microsecondsToClockCycles(6)
+
+static IRAM_ATTR void timer1Interrupt() {
+  // ----- @willmmiles begin patch -----
+  nmiCrashWorkaround();
+  // ----- @willmmiles end patch -----
+
+  // Flag if the core is at 160 MHz, for use by adjust()
+  bool turbo = (*(uint32_t*)0x3FF00014) & 1 ? true : false;
+
+  uint32_t nextEventCycle = GetCycleCountIRQ() + microsecondsToClockCycles(MAXIRQUS);
+  uint32_t timeoutCycle = GetCycleCountIRQ() + microsecondsToClockCycles(14);
+
+  if (wvfState.waveformToEnable || wvfState.waveformToDisable) {
+    // Handle enable/disable requests from main app
+    wvfState.waveformEnabled = (wvfState.waveformEnabled & ~wvfState.waveformToDisable) | wvfState.waveformToEnable; // Set the requested waveforms on/off
+    wvfState.waveformState &= ~wvfState.waveformToEnable;  // And clear the state of any just started
+    wvfState.waveformToEnable = 0;
+    wvfState.waveformToDisable = 0;
+    // No mem barrier.  Globals must be written to RAM on ISR exit.
+    // Find the first GPIO being generated by checking GCC's find-first-set (returns 1 + the bit of the first 1 in an int32_t)
+    wvfState.startPin = __builtin_ffs(wvfState.waveformEnabled) - 1;
+    // Find the last bit by subtracting off GCC's count-leading-zeros (no offset in this one)
+    wvfState.endPin = 32 - __builtin_clz(wvfState.waveformEnabled);
+  } else if (!pwmState.cnt && pwmState.pwmUpdate) {
+    // Start up the PWM generator by copying from the mailbox
+    pwmState.cnt = 1;
+    pwmState.idx = 1; // Ensure copy this cycle, cause it to start at t=0
+    pwmState.nextServiceCycle = GetCycleCountIRQ(); // Do it this loop!
+    // No need for mem barrier here.  Global must be written by IRQ exit
+  }
+
+  bool done = false;
+  if (wvfState.waveformEnabled || pwmState.cnt) {
+    do {
+      nextEventCycle = GetCycleCountIRQ() + microsecondsToClockCycles(MAXIRQUS);
+
+      // PWM state machine implementation
+      if (pwmState.cnt) {
+        int32_t cyclesToGo;
+        do {
+            cyclesToGo = pwmState.nextServiceCycle - GetCycleCountIRQ();
+            if (cyclesToGo < 0) {
+                if (pwmState.idx == pwmState.cnt) { // Start of pulses, possibly copy new
+                  if (pwmState.pwmUpdate) {
+                    // Do the memory copy from temp to global and clear mailbox
+                    pwmState = *(PWMState*)pwmState.pwmUpdate;
+                  }
+                  GPOS = pwmState.mask; // Set all active pins high
+                  if (pwmState.mask & (1<<16)) {
+                    GP16O = 1;
+                  }
+                  pwmState.idx = 0;
+                } else {
+                  do {
+                    // Drop the pin at this edge
+                    if (pwmState.mask & (1<<pwmState.pin[pwmState.idx])) {
+                      GPOC = 1<<pwmState.pin[pwmState.idx];
+                      if (pwmState.pin[pwmState.idx] == 16) {
+                        GP16O = 0;
+                      }
+                    }
+                    pwmState.idx++;
+                    // Any other pins at this same PWM value will have delta==0, drop them too.
+                  } while (pwmState.delta[pwmState.idx] == 0);
+                }
+                // Preserve duty cycle over PWM period by using now+xxx instead of += delta
+                cyclesToGo = adjust(pwmState.delta[pwmState.idx]);
+                pwmState.nextServiceCycle = GetCycleCountIRQ() + cyclesToGo;
+            }
+            nextEventCycle = earliest(nextEventCycle, pwmState.nextServiceCycle);
+        } while (pwmState.cnt && (cyclesToGo < 100));
+      }
+
+      for (auto i = wvfState.startPin; i <= wvfState.endPin; i++) {
+        uint32_t mask = 1<<i;
+
+        // If it's not on, ignore!
+        if (!(wvfState.waveformEnabled & mask)) {
+          continue;
+        }
+
+        Waveform *wave = &wvfState.waveform[i];
+        uint32_t now = GetCycleCountIRQ();
+
+        // Disable any waveforms that are done
+        if (wave->expiryCycle) {
+          int32_t expiryToGo = wave->expiryCycle - now;
+          if (expiryToGo < 0) {
+              // Done, remove!
+              if (i == 16) {
+                GP16O = 0;
+              } 
+              GPOC = mask;
+              wvfState.waveformEnabled &= ~mask;
+              continue;
+            }
+        }
+
+        // Check for toggles
+        int32_t cyclesToGo = wave->nextServiceCycle - now;
+        if (cyclesToGo < 0) {
+          uint32_t nextEdgeCycles;
+          uint32_t desired = 0;
+          uint32_t *timeToUpdate;
+          wvfState.waveformState ^= mask;
+          if (wvfState.waveformState & mask) {
+            if (i == 16) {
+              GP16O = 1;
+            }
+            GPOS = mask;
+
+            if (wvfState.waveformToChange & mask) {
+              // Copy over next full-cycle timings
+              wave->timeHighCycles = wvfState.waveformNewHigh;
+              wave->desiredHighCycles = wvfState.waveformNewHigh;
+              wave->timeLowCycles = wvfState.waveformNewLow;
+              wave->desiredLowCycles = wvfState.waveformNewLow;
+              wave->lastEdge = 0;
+              wvfState.waveformToChange = 0;
+            }
+            if (wave->lastEdge) {
+              desired = wave->desiredLowCycles;
+              timeToUpdate = &wave->timeLowCycles;
+            }
+            nextEdgeCycles = wave->timeHighCycles;
+          } else {
+            if (i == 16) {
+              GP16O = 0;
+            }
+            GPOC = mask;
+            desired = wave->desiredHighCycles;
+            timeToUpdate = &wave->timeHighCycles;
+            nextEdgeCycles = wave->timeLowCycles;
+          }
+          if (desired) {
+            desired = adjust(desired);
+            int32_t err = desired - (now - wave->lastEdge);
+            if (abs(err) < desired) { // If we've lost > the entire phase, ignore this error signal
+                err /= 2;
+                *timeToUpdate += err;
+            }
+          }
+          nextEdgeCycles = adjust(nextEdgeCycles);
+          wave->nextServiceCycle = now + nextEdgeCycles;
+          wave->lastEdge = now;
+        }
+        nextEventCycle = earliest(nextEventCycle, wave->nextServiceCycle);
+      }
+
+      // Exit the loop if we've hit the fixed runtime limit or the next event is known to be after that timeout would occur
+      uint32_t now = GetCycleCountIRQ();
+      int32_t cycleDeltaNextEvent = nextEventCycle - now;
+      int32_t cyclesLeftTimeout = timeoutCycle - now;
+      done = (cycleDeltaNextEvent > MINIRQTIME) || (cyclesLeftTimeout < 0);
+    } while (!done);
+  } // if (wvfState.waveformEnabled)
+
+  if (wvfState.timer1CB) {
+    nextEventCycle = earliest(nextEventCycle, GetCycleCountIRQ() + wvfState.timer1CB());
+  }
+
+  int32_t nextEventCycles = nextEventCycle - GetCycleCountIRQ();
+
+  if (nextEventCycles < MINIRQTIME) {
+    nextEventCycles = MINIRQTIME;
+  }
+  nextEventCycles -= DELTAIRQ;
+
+  // Do it here instead of global function to save time and because we know it's edge-IRQ
+  T1L = nextEventCycles >> (turbo ? 1 : 0);
+}
+
+};

package.json

@@ -1,6 +1,6 @@
 {
   "name": "wled",
-  "version": "0.16.0-alpha",
+  "version": "0.15.1.beta1",
   "description": "Tools for WLED project",
   "main": "tools/cdata.js",
   "directories": {
@@ -14,21 +14,21 @@
   },
   "repository": {
     "type": "git",
-    "url": "git+https://github.com/wled-dev/WLED.git"
+    "url": "git+https://github.com/Aircoookie/WLED.git"
   },
   "author": "",
   "license": "ISC",
   "bugs": {
-    "url": "https://github.com/wled-dev/WLED/issues"
+    "url": "https://github.com/Aircoookie/WLED/issues"
   },
-  "homepage": "https://github.com/wled-dev/WLED#readme",
+  "homepage": "https://github.com/Aircoookie/WLED#readme",
   "dependencies": {
     "clean-css": "^5.3.3",
     "html-minifier-terser": "^7.2.0",
-    "web-resource-inliner": "^7.0.0",
-    "nodemon": "^3.1.9"
+    "inliner": "^1.13.1",
+    "nodemon": "^3.1.7"
   },
   "engines": {
     "node": ">=20.0.0"
   }
-}
+}

pio-scripts/build_ui.py

@@ -10,7 +10,7 @@ if node_ex is None:
 else:
     # Install the necessary node packages for the pre-build asset bundling script
     print('\x1b[6;33;42m' + 'Installing node packages' + '\x1b[0m')
-    env.Execute("npm ci")
+    env.Execute("npm install")
 
     # Call the bundling script
     exitCode = env.Execute("npm run build")
@@ -18,4 +18,4 @@ else:
     # If it failed, abort the build
     if (exitCode):
       print('\x1b[0;31;43m' + 'npm run build fails check https://kno.wled.ge/advanced/compiling-wled/' + '\x1b[0m')
-      exit(exitCode)
+      exit(exitCode)

pio-scripts/load_usermods.py

@@ -1,115 +0,0 @@
-Import('env')
-import os.path
-from collections import deque
-from pathlib import Path   # For OS-agnostic path manipulation
-from platformio.package.manager.library import LibraryPackageManager
-
-usermod_dir = Path(env["PROJECT_DIR"]) / "usermods"
-all_usermods = [f for f in usermod_dir.iterdir() if f.is_dir() and f.joinpath('library.json').exists()]
-
-if env['PIOENV'] == "usermods":
-   # Add all usermods
-   env.GetProjectConfig().set(f"env:usermods", 'custom_usermods', " ".join([f.name for f in all_usermods]))
-
-def find_usermod(mod: str):
-  """Locate this library in the usermods folder.
-     We do this to avoid needing to rename a bunch of folders;
-     this could be removed later
-  """
-  # Check name match
-  mp = usermod_dir / mod
-  if mp.exists():
-    return mp
-  mp = usermod_dir / f"{mod}_v2"
-  if mp.exists():
-    return mp  
-  mp = usermod_dir / f"usermod_v2_{mod}"
-  if mp.exists():
-    return mp
-  raise RuntimeError(f"Couldn't locate module {mod} in usermods directory!")
-
-usermods = env.GetProjectOption("custom_usermods","")
-if usermods:
-  # Inject usermods in to project lib_deps
-  proj = env.GetProjectConfig()
-  deps = env.GetProjectOption('lib_deps')
-  src_dir = proj.get("platformio", "src_dir")
-  src_dir = src_dir.replace('\\','/')
-  mod_paths = {mod: find_usermod(mod) for mod in usermods.split()}
-  usermods = [f"{mod} = symlink://{path}" for mod, path in mod_paths.items()]
-  proj.set("env:" + env['PIOENV'], 'lib_deps', deps + usermods)
-  # Force usermods to be installed in to the environment build state before the LDF runs
-  # Otherwise we won't be able to see them until it's too late to change their paths for LDF
-  # Logic is largely borrowed from PlaformIO internals
-  not_found_specs = []
-  for spec in usermods:
-    found = False
-    for storage_dir in env.GetLibSourceDirs():
-      #print(f"Checking {storage_dir} for {spec}")
-      lm = LibraryPackageManager(storage_dir)
-      if lm.get_package(spec):
-          #print("Found!")
-          found = True
-          break
-    if not found:
-        #print("Missing!")
-        not_found_specs.append(spec)
-  if not_found_specs:
-      lm = LibraryPackageManager(
-          env.subst(os.path.join("$PROJECT_LIBDEPS_DIR", "$PIOENV"))
-      )
-      for spec in not_found_specs:
-        #print(f"LU: forcing install of {spec}")
-        lm.install(spec)
-
-
-# Utility function for assembling usermod include paths
-def cached_add_includes(dep, dep_cache: set, includes: deque):
-  """ Add dep's include paths to includes if it's not in the cache """
-  if dep not in dep_cache:   
-    dep_cache.add(dep)
-    for include in dep.get_include_dirs():
-      if include not in includes:
-        includes.appendleft(include)
-      if usermod_dir not in Path(dep.src_dir).parents:
-        # Recurse, but only for NON-usermods
-        for subdep in dep.depbuilders:
-          cached_add_includes(subdep, dep_cache, includes)
-
-# Monkey-patch ConfigureProjectLibBuilder to mark up the dependencies
-# Save the old value
-old_ConfigureProjectLibBuilder = env.ConfigureProjectLibBuilder
-
-# Our new wrapper
-def wrapped_ConfigureProjectLibBuilder(xenv):
-  # Update usermod properties
-  # Set libArchive before build actions are added
-  for um in (um for um in xenv.GetLibBuilders() if usermod_dir in Path(um.src_dir).parents):
-    build = um._manifest.get("build", {})
-    build["libArchive"] = False
-    um._manifest["build"] = build
-
-  # Call the wrapped function
-  result = old_ConfigureProjectLibBuilder.clone(xenv)()
-
-  # Fix up include paths
-  # In PlatformIO >=6.1.17, this could be done prior to ConfigureProjectLibBuilder
-  wled_dir = xenv["PROJECT_SRC_DIR"]
-  # Build a list of dependency include dirs
-  # TODO: Find out if this is the order that PlatformIO/SCons puts them in??
-  processed_deps = set()
-  extra_include_dirs = deque()  # Deque used for fast prepend
-  for dep in result.depbuilders:
-     cached_add_includes(dep, processed_deps, extra_include_dirs)
-
-  for um in [dep for dep in result.depbuilders if usermod_dir in Path(dep.src_dir).parents]:
-    # Add the wled folder to the include path
-    um.env.PrependUnique(CPPPATH=wled_dir)
-    # Add WLED's own dependencies
-    for dir in extra_include_dirs:
-      um.env.PrependUnique(CPPPATH=dir)
-
-  return result
-
-# Apply the wrapper
-env.AddMethod(wrapped_ConfigureProjectLibBuilder, "ConfigureProjectLibBuilder")

platformio.ini

@@ -10,7 +10,7 @@
 # ------------------------------------------------------------------------------
 
 # CI/release binaries
-default_envs = nodemcuv2, esp8266_2m, esp01_1m_full, nodemcuv2_160, esp8266_2m_160, esp01_1m_full_160, nodemcuv2_compat, esp8266_2m_compat, esp01_1m_full_compat, esp32dev, esp32dev_V4, esp32_eth, lolin_s2_mini, esp32c3dev, esp32s3dev_16MB_opi, esp32s3dev_8MB_opi, esp32s3_4M_qspi, esp32_wrover, usermods
+default_envs = nodemcuv2, esp8266_2m, esp01_1m_full, nodemcuv2_160, esp8266_2m_160, esp01_1m_full_160, nodemcuv2_compat, esp8266_2m_compat, esp01_1m_full_compat, esp32dev, esp32_eth, lolin_s2_mini, esp32c3dev, esp32s3dev_16MB_opi, esp32s3dev_8MB_opi, esp32s3_4M_qspi, esp32_wrover
 
 src_dir  = ./wled00
 data_dir = ./wled00/data
@@ -114,7 +114,6 @@ extra_scripts =
   post:pio-scripts/output_bins.py
   post:pio-scripts/strip-floats.py
   pre:pio-scripts/user_config_copy.py
-  pre:pio-scripts/load_usermods.py
   pre:pio-scripts/build_ui.py
   ; post:pio-scripts/obj-dump.py  ;; convenience script to create a disassembly dump of the firmware (hardcore debugging)
 
@@ -139,9 +138,9 @@ lib_compat_mode = strict
 lib_deps =
     fastled/FastLED @ 3.6.0
     IRremoteESP8266 @ 2.8.2
-    makuna/NeoPixelBus @ 2.8.3
+    makuna/NeoPixelBus @ 2.8.0
     #https://github.com/makuna/NeoPixelBus.git#CoreShaderBeta
-    https://github.com/Aircoookie/ESPAsyncWebServer.git#v2.4.0
+    https://github.com/Aircoookie/ESPAsyncWebServer.git#v2.2.1
   # for I2C interface
     ;Wire
   # ESP-NOW library
@@ -158,13 +157,21 @@ lib_deps =
     ;adafruit/Adafruit BMP280 Library @ 2.1.0
     ;adafruit/Adafruit CCS811 Library @ 1.0.4
     ;adafruit/Adafruit Si7021 Library @ 1.4.0
+  #For ADS1115 sensor uncomment following
+    ;adafruit/Adafruit BusIO @ 1.13.2
+    ;adafruit/Adafruit ADS1X15 @ 2.4.0
   #For MAX1704x Lipo Monitor / Fuel Gauge uncomment following
     ; https://github.com/adafruit/Adafruit_BusIO @ 1.14.5
     ; https://github.com/adafruit/Adafruit_MAX1704X @ 1.0.2
   #For MPU6050 IMU uncomment follwoing
     ;electroniccats/MPU6050 @1.0.1
+  # For -D USERMOD_ANIMARTRIX
+  # CC BY-NC 3.0 licensed effects by Stefan Petrick, include this usermod only if you accept the terms!
+    ;https://github.com/netmindz/animartrix.git#18bf17389e57c69f11bc8d04ebe1d215422c7fb7
   # SHT85
     ;robtillaart/SHT85@~0.3.3
+  # Audioreactive usermod
+    ;kosme/arduinoFFT @ 2.0.1
 
 extra_scripts = ${scripts_defaults.extra_scripts}
 
@@ -229,16 +236,8 @@ lib_deps_compat =
   IRremoteESP8266 @ 2.8.2
   makuna/NeoPixelBus @ 2.7.9
   https://github.com/blazoncek/QuickESPNow.git#optional-debug
-  https://github.com/Aircoookie/ESPAsyncWebServer.git#v2.4.0
+  https://github.com/Aircoookie/ESPAsyncWebServer.git#v2.2.1
 
-[esp32_all_variants]
-lib_deps =
-  willmmiles/AsyncTCP @ 1.3.1
-  bitbank2/AnimatedGIF@^1.4.7
-  https://github.com/Aircoookie/GifDecoder#bc3af18
-build_flags =
-  -D CONFIG_ASYNC_TCP_USE_WDT=0
-  -D WLED_ENABLE_GIF
 
 [esp32]
 #platform = https://github.com/tasmota/platform-espressif32/releases/download/v2.0.2.3/platform-espressif32-2.0.2.3.zip
@@ -248,11 +247,10 @@ build_unflags = ${common.build_unflags}
 build_flags = -g
   -DARDUINO_ARCH_ESP32
   #-DCONFIG_LITTLEFS_FOR_IDF_3_2
+  -D CONFIG_ASYNC_TCP_USE_WDT=0
   #use LITTLEFS library by lorol in ESP32 core 1.x.x instead of built-in in 2.x.x
   -D LOROL_LITTLEFS
   ; -DARDUINO_USB_CDC_ON_BOOT=0 ;; this flag is mandatory for "classic ESP32" when building with arduino-esp32 >=2.0.3
-  ${esp32_all_variants.build_flags}
-
 tiny_partitions = tools/WLED_ESP32_2MB_noOTA.csv
 default_partitions = tools/WLED_ESP32_4MB_1MB_FS.csv
 extended_partitions = tools/WLED_ESP32_4MB_700k_FS.csv
@@ -261,13 +259,13 @@ large_partitions = tools/WLED_ESP32_8MB.csv
 extreme_partitions = tools/WLED_ESP32_16MB_9MB_FS.csv
 lib_deps =
   https://github.com/lorol/LITTLEFS.git
-  ${esp32_all_variants.lib_deps}
+  https://github.com/pbolduc/AsyncTCP.git @ 1.2.0
   ${env.lib_deps}
+# additional build flags for audioreactive
+AR_build_flags = -D USERMOD_AUDIOREACTIVE 
+  -D sqrt_internal=sqrtf ;; -fsingle-precision-constant ;; forces ArduinoFFT to use float math (2x faster)
+AR_lib_deps = kosme/arduinoFFT @ 2.0.1
 board_build.partitions = ${esp32.default_partitions}   ;; default partioning for 4MB Flash - can be overridden in build envs
-# additional build flags for audioreactive - must be applied globally
-AR_build_flags = ;; -fsingle-precision-constant ;; forces ArduinoFFT to use float math (2x faster)
-AR_lib_deps =  ;; for pre-usermod-library platformio_override compatibility
-
 
 [esp32_idf_V4]
 ;; experimental build environment for ESP32 using ESP-IDF 4.4.x / arduino-esp32 v2.0.5
@@ -275,76 +273,75 @@ AR_lib_deps =  ;; for pre-usermod-library platformio_override compatibility
 ;;
 ;; please note that you can NOT update existing ESP32 installs with a "V4" build. Also updating by OTA will not work properly.
 ;; You need to completely erase your device (esptool erase_flash) first, then install the "V4" build from VSCode+platformio.
-
-;; select arduino-esp32 v2.0.9 (arduino-esp32 2.0.10 thru 2.0.14 are buggy so avoid them)
-platform = https://github.com/tasmota/platform-espressif32/releases/download/2023.06.02/platform-espressif32.zip ;; Tasmota Arduino Core 2.0.9 with IPv6 support, based on IDF 4.4.4
+platform = espressif32@ ~6.3.2
+platform_packages = platformio/framework-arduinoespressif32 @ 3.20009.0    ;; select arduino-esp32 v2.0.9 (arduino-esp32 2.0.10 thru 2.0.14 are buggy so avoid them)
 build_unflags = ${common.build_unflags}
 build_flags = -g
   -Wshadow=compatible-local ;; emit warning in case a local variable "shadows" another local one
   -DARDUINO_ARCH_ESP32 -DESP32
+  -D CONFIG_ASYNC_TCP_USE_WDT=0
   -DARDUINO_USB_CDC_ON_BOOT=0 ;; this flag is mandatory for "classic ESP32" when building with arduino-esp32 >=2.0.3
-  ${esp32_all_variants.build_flags}
-  -D WLED_ENABLE_DMX_INPUT
 lib_deps =
-  ${esp32_all_variants.lib_deps}
-  https://github.com/someweisguy/esp_dmx.git#47db25d
+  https://github.com/pbolduc/AsyncTCP.git @ 1.2.0
   ${env.lib_deps}
 board_build.partitions = ${esp32.default_partitions}   ;; default partioning for 4MB Flash - can be overridden in build envs
 
 [esp32s2]
 ;; generic definitions for all ESP32-S2 boards
-platform = ${esp32_idf_V4.platform}
+platform = espressif32@ ~6.3.2
+platform_packages = platformio/framework-arduinoespressif32 @ 3.20009.0    ;; select arduino-esp32 v2.0.9 (arduino-esp32 2.0.10 thru 2.0.14 are buggy so avoid them)
 build_unflags = ${common.build_unflags}
 build_flags = -g
   -DARDUINO_ARCH_ESP32
   -DARDUINO_ARCH_ESP32S2
   -DCONFIG_IDF_TARGET_ESP32S2=1
+  -D CONFIG_ASYNC_TCP_USE_WDT=0
   -DARDUINO_USB_MSC_ON_BOOT=0 -DARDUINO_USB_DFU_ON_BOOT=0
   -DCO
   -DARDUINO_USB_MODE=0 ;; this flag is mandatory for ESP32-S2 !
   ;; please make sure that the following flags are properly set (to 0 or 1) by your board.json, or included in your custom platformio_override.ini entry:
   ;; ARDUINO_USB_CDC_ON_BOOT
-  ${esp32_all_variants.build_flags}
 lib_deps =
-  ${esp32_all_variants.lib_deps}
+  https://github.com/pbolduc/AsyncTCP.git @ 1.2.0
   ${env.lib_deps}
 board_build.partitions = ${esp32.default_partitions}   ;; default partioning for 4MB Flash - can be overridden in build envs
 
 [esp32c3]
 ;; generic definitions for all ESP32-C3 boards
-platform = ${esp32_idf_V4.platform}
+platform = espressif32@ ~6.3.2
+platform_packages = platformio/framework-arduinoespressif32 @ 3.20009.0    ;; select arduino-esp32 v2.0.9 (arduino-esp32 2.0.10 thru 2.0.14 are buggy so avoid them)
 build_unflags = ${common.build_unflags}
 build_flags = -g
   -DARDUINO_ARCH_ESP32
   -DARDUINO_ARCH_ESP32C3
   -DCONFIG_IDF_TARGET_ESP32C3=1
+  -D CONFIG_ASYNC_TCP_USE_WDT=0
   -DCO
   -DARDUINO_USB_MODE=1 ;; this flag is mandatory for ESP32-C3
   ;; please make sure that the following flags are properly set (to 0 or 1) by your board.json, or included in your custom platformio_override.ini entry:
   ;; ARDUINO_USB_CDC_ON_BOOT
-  ${esp32_all_variants.build_flags}
 lib_deps =
-  ${esp32_all_variants.lib_deps}
+  https://github.com/pbolduc/AsyncTCP.git @ 1.2.0
   ${env.lib_deps}
 board_build.partitions = ${esp32.default_partitions}   ;; default partioning for 4MB Flash - can be overridden in build envs
-board_build.flash_mode = qio
 
 [esp32s3]
 ;; generic definitions for all ESP32-S3 boards
-platform = ${esp32_idf_V4.platform}
+platform = espressif32@ ~6.3.2
+platform_packages = platformio/framework-arduinoespressif32 @ 3.20009.0    ;; select arduino-esp32 v2.0.9 (arduino-esp32 2.0.10 thru 2.0.14 are buggy so avoid them)
 build_unflags = ${common.build_unflags}
 build_flags = -g
   -DESP32
   -DARDUINO_ARCH_ESP32
   -DARDUINO_ARCH_ESP32S3
   -DCONFIG_IDF_TARGET_ESP32S3=1
+  -D CONFIG_ASYNC_TCP_USE_WDT=0
   -DARDUINO_USB_MSC_ON_BOOT=0 -DARDUINO_DFU_ON_BOOT=0
   -DCO
   ;; please make sure that the following flags are properly set (to 0 or 1) by your board.json, or included in your custom platformio_override.ini entry:
   ;; ARDUINO_USB_MODE, ARDUINO_USB_CDC_ON_BOOT
-  ${esp32_all_variants.build_flags}
 lib_deps =
-  ${esp32_all_variants.lib_deps}
+  https://github.com/pbolduc/AsyncTCP.git @ 1.2.0
   ${env.lib_deps}
 board_build.partitions = ${esp32.large_partitions}   ;; default partioning for 8MB flash - can be overridden in build envs
 
@@ -360,7 +357,6 @@ platform_packages = ${common.platform_packages}
 board_build.ldscript = ${common.ldscript_4m1m}
 build_unflags = ${common.build_unflags}
 build_flags = ${common.build_flags} ${esp8266.build_flags} -D WLED_RELEASE_NAME=\"ESP8266\" #-DWLED_DISABLE_2D
-  -D WLED_DISABLE_PARTICLESYSTEM2D
 lib_deps = ${esp8266.lib_deps}
 monitor_filters = esp8266_exception_decoder
 
@@ -370,15 +366,13 @@ extends = env:nodemcuv2
 platform = ${esp8266.platform_compat}
 platform_packages = ${esp8266.platform_packages_compat}
 build_flags = ${common.build_flags} ${esp8266.build_flags_compat} -D WLED_RELEASE_NAME=\"ESP8266_compat\" #-DWLED_DISABLE_2D
-  -D WLED_DISABLE_PARTICLESYSTEM2D
 ;; lib_deps = ${esp8266.lib_deps_compat} ;; experimental - use older NeoPixelBus 2.7.9
 
 [env:nodemcuv2_160]
 extends = env:nodemcuv2
 board_build.f_cpu = 160000000L
 build_flags = ${common.build_flags} ${esp8266.build_flags} -D WLED_RELEASE_NAME=\"ESP8266_160\" #-DWLED_DISABLE_2D
-  -D WLED_DISABLE_PARTICLESYSTEM2D
-custom_usermods = audioreactive
+  -D USERMOD_AUDIOREACTIVE
 
 [env:esp8266_2m]
 board = esp_wroom_02
@@ -387,8 +381,6 @@ platform_packages = ${common.platform_packages}
 board_build.ldscript = ${common.ldscript_2m512k}
 build_unflags = ${common.build_unflags}
 build_flags = ${common.build_flags} ${esp8266.build_flags} -D WLED_RELEASE_NAME=\"ESP02\"
-  -D WLED_DISABLE_PARTICLESYSTEM2D
-  -D WLED_DISABLE_PARTICLESYSTEM1D
 lib_deps = ${esp8266.lib_deps}
 
 [env:esp8266_2m_compat]
@@ -397,16 +389,12 @@ extends = env:esp8266_2m
 platform = ${esp8266.platform_compat}
 platform_packages = ${esp8266.platform_packages_compat}
 build_flags = ${common.build_flags} ${esp8266.build_flags_compat} -D WLED_RELEASE_NAME=\"ESP02_compat\" #-DWLED_DISABLE_2D
-  -D WLED_DISABLE_PARTICLESYSTEM1D
-  -D WLED_DISABLE_PARTICLESYSTEM2D
 
 [env:esp8266_2m_160]
 extends = env:esp8266_2m
 board_build.f_cpu = 160000000L
 build_flags = ${common.build_flags} ${esp8266.build_flags} -D WLED_RELEASE_NAME=\"ESP02_160\"
-  -D WLED_DISABLE_PARTICLESYSTEM1D
-  -D WLED_DISABLE_PARTICLESYSTEM2D
-custom_usermods = audioreactive
+  -D USERMOD_AUDIOREACTIVE
 
 [env:esp01_1m_full]
 board = esp01_1m
@@ -416,8 +404,6 @@ board_build.ldscript = ${common.ldscript_1m128k}
 build_unflags = ${common.build_unflags}
 build_flags = ${common.build_flags} ${esp8266.build_flags} -D WLED_RELEASE_NAME=\"ESP01\" -D WLED_DISABLE_OTA
   ; -D WLED_USE_REAL_MATH ;; may fix wrong sunset/sunrise times, at the cost of 7064 bytes FLASH and 975 bytes RAM
-  -D WLED_DISABLE_PARTICLESYSTEM1D
-  -D WLED_DISABLE_PARTICLESYSTEM2D
 lib_deps = ${esp8266.lib_deps}
 
 [env:esp01_1m_full_compat]
@@ -426,47 +412,35 @@ extends = env:esp01_1m_full
 platform = ${esp8266.platform_compat}
 platform_packages = ${esp8266.platform_packages_compat}
 build_flags = ${common.build_flags} ${esp8266.build_flags_compat} -D WLED_RELEASE_NAME=\"ESP01_compat\" -D WLED_DISABLE_OTA #-DWLED_DISABLE_2D
-  -D WLED_DISABLE_PARTICLESYSTEM1D
-  -D WLED_DISABLE_PARTICLESYSTEM2D
 
 [env:esp01_1m_full_160]
 extends = env:esp01_1m_full
 board_build.f_cpu = 160000000L
 build_flags = ${common.build_flags} ${esp8266.build_flags} -D WLED_RELEASE_NAME=\"ESP01_160\" -D WLED_DISABLE_OTA
+  -D USERMOD_AUDIOREACTIVE
   ; -D WLED_USE_REAL_MATH ;; may fix wrong sunset/sunrise times, at the cost of 7064 bytes FLASH and 975 bytes RAM
-  -D WLED_DISABLE_PARTICLESYSTEM1D
-  -D WLED_DISABLE_PARTICLESYSTEM2D
-custom_usermods = audioreactive
 
 [env:esp32dev]
 board = esp32dev
 platform = ${esp32.platform}
 platform_packages = ${esp32.platform_packages}
-custom_usermods = audioreactive
 build_unflags = ${common.build_unflags}
 build_flags = ${common.build_flags} ${esp32.build_flags} -D WLED_RELEASE_NAME=\"ESP32\" #-D WLED_DISABLE_BROWNOUT_DET
+  ${esp32.AR_build_flags}
 lib_deps = ${esp32.lib_deps}
+  ${esp32.AR_lib_deps}
 monitor_filters = esp32_exception_decoder
 board_build.partitions = ${esp32.default_partitions}
 
-[env:esp32dev_V4]
-board = esp32dev
-platform = ${esp32_idf_V4.platform}
-build_unflags = ${common.build_unflags}
-custom_usermods = audioreactive
-build_flags = ${common.build_flags} ${esp32_idf_V4.build_flags} -D WLED_RELEASE_NAME=\"ESP32_V4\" #-D WLED_DISABLE_BROWNOUT_DET
-lib_deps = ${esp32_idf_V4.lib_deps}
-monitor_filters = esp32_exception_decoder
-board_build.partitions = ${esp32.default_partitions}
-board_build.flash_mode = dio
-
 [env:esp32dev_8M]
 board = esp32dev
 platform = ${esp32_idf_V4.platform}
-custom_usermods = audioreactive
+platform_packages = ${esp32_idf_V4.platform_packages}
 build_unflags = ${common.build_unflags}
 build_flags = ${common.build_flags} ${esp32_idf_V4.build_flags} -D WLED_RELEASE_NAME=\"ESP32_8M\" #-D WLED_DISABLE_BROWNOUT_DET
+  ${esp32.AR_build_flags}
 lib_deps = ${esp32_idf_V4.lib_deps}
+  ${esp32.AR_lib_deps}
 monitor_filters = esp32_exception_decoder
 board_build.partitions = ${esp32.large_partitions}
 board_upload.flash_size = 8MB
@@ -477,10 +451,12 @@ board_upload.maximum_size = 8388608
 [env:esp32dev_16M]
 board = esp32dev
 platform = ${esp32_idf_V4.platform}
-custom_usermods = audioreactive
+platform_packages = ${esp32_idf_V4.platform_packages}
 build_unflags = ${common.build_unflags}
 build_flags = ${common.build_flags} ${esp32_idf_V4.build_flags} -D WLED_RELEASE_NAME=\"ESP32_16M\" #-D WLED_DISABLE_BROWNOUT_DET
+  ${esp32.AR_build_flags}
 lib_deps = ${esp32_idf_V4.lib_deps}
+  ${esp32.AR_lib_deps}
 monitor_filters = esp32_exception_decoder
 board_build.partitions = ${esp32.extreme_partitions}
 board_upload.flash_size = 16MB
@@ -492,10 +468,11 @@ board_build.flash_mode = dio
 ;board = esp32dev
 ;platform = ${esp32.platform}
 ;platform_packages = ${esp32.platform_packages}
-;custom_usermods = audioreactive
 ;build_unflags = ${common.build_unflags}
 ;build_flags = ${common.build_flags} ${esp32.build_flags} -D WLED_RELEASE_NAME=\"ESP32_audioreactive\" #-D WLED_DISABLE_BROWNOUT_DET
+;  ${esp32.AR_build_flags}
 ;lib_deps = ${esp32.lib_deps}
+;  ${esp32.AR_lib_deps}
 ;monitor_filters = esp32_exception_decoder
 ;board_build.partitions = ${esp32.default_partitions}
 ;; board_build.f_flash = 80000000L
@@ -506,30 +483,34 @@ board = esp32-poe
 platform = ${esp32.platform}
 platform_packages = ${esp32.platform_packages}
 upload_speed = 921600
-custom_usermods = audioreactive
 build_unflags = ${common.build_unflags}
 build_flags = ${common.build_flags} ${esp32.build_flags} -D WLED_RELEASE_NAME=\"ESP32_Ethernet\" -D RLYPIN=-1 -D WLED_USE_ETHERNET -D BTNPIN=-1
 ;  -D WLED_DISABLE_ESPNOW ;; ESP-NOW requires wifi, may crash with ethernet only
+  ${esp32.AR_build_flags}
 lib_deps = ${esp32.lib_deps}
+  ${esp32.AR_lib_deps}
 board_build.partitions = ${esp32.default_partitions}
 
 [env:esp32_wrover]
 extends = esp32_idf_V4
 platform = ${esp32_idf_V4.platform}
+platform_packages = ${esp32_idf_V4.platform_packages}
 board = ttgo-t7-v14-mini32
 board_build.f_flash = 80000000L
 board_build.flash_mode = qio
 board_build.partitions = ${esp32.extended_partitions}
-custom_usermods = audioreactive
 build_unflags = ${common.build_unflags}
 build_flags = ${common.build_flags} ${esp32_idf_V4.build_flags} -D WLED_RELEASE_NAME=\"ESP32_WROVER\"
   -DBOARD_HAS_PSRAM -mfix-esp32-psram-cache-issue ;; Older ESP32 (rev.<3) need a PSRAM fix (increases static RAM used) https://docs.espressif.com/projects/esp-idf/en/stable/esp32/api-guides/external-ram.html
   -D DATA_PINS=25
+  ${esp32.AR_build_flags}
 lib_deps = ${esp32_idf_V4.lib_deps}
-  
+  ${esp32.AR_lib_deps}
+
 [env:esp32c3dev]
 extends = esp32c3
 platform = ${esp32c3.platform}
+platform_packages = ${esp32c3.platform_packages}
 framework = arduino
 board = esp32-c3-devkitm-1
 board_build.partitions = ${esp32.default_partitions}
@@ -547,15 +528,17 @@ lib_deps = ${esp32c3.lib_deps}
 board = esp32-s3-devkitc-1 ;; generic dev board; the next line adds PSRAM support
 board_build.arduino.memory_type = qio_opi     ;; use with PSRAM: 8MB or 16MB
 platform = ${esp32s3.platform}
+platform_packages = ${esp32s3.platform_packages}
 upload_speed = 921600
-custom_usermods = audioreactive
 build_unflags = ${common.build_unflags}
 build_flags = ${common.build_flags} ${esp32s3.build_flags} -D WLED_RELEASE_NAME=\"ESP32-S3_16MB_opi\"
   -D CONFIG_LITTLEFS_FOR_IDF_3_2 -D WLED_WATCHDOG_TIMEOUT=0
   ;-D ARDUINO_USB_CDC_ON_BOOT=0  ;; -D ARDUINO_USB_MODE=1 ;; for boards with serial-to-USB chip
   -D ARDUINO_USB_CDC_ON_BOOT=1 -D ARDUINO_USB_MODE=1      ;; for boards with USB-OTG connector only (USBCDC or "TinyUSB")
   -DBOARD_HAS_PSRAM
+  ${esp32.AR_build_flags}
 lib_deps = ${esp32s3.lib_deps}
+  ${esp32.AR_lib_deps}
 board_build.partitions = ${esp32.extreme_partitions}
 board_upload.flash_size = 16MB
 board_upload.maximum_size = 16777216
@@ -568,15 +551,17 @@ monitor_filters = esp32_exception_decoder
 board = esp32-s3-devkitc-1 ;; generic dev board; the next line adds PSRAM support
 board_build.arduino.memory_type = qio_opi     ;; use with PSRAM: 8MB or 16MB
 platform = ${esp32s3.platform}
+platform_packages = ${esp32s3.platform_packages}
 upload_speed = 921600
-custom_usermods = audioreactive
 build_unflags = ${common.build_unflags}
 build_flags = ${common.build_flags} ${esp32s3.build_flags} -D WLED_RELEASE_NAME=\"ESP32-S3_8MB_opi\"
   -D CONFIG_LITTLEFS_FOR_IDF_3_2 -D WLED_WATCHDOG_TIMEOUT=0
   ;-D ARDUINO_USB_CDC_ON_BOOT=0  ;; -D ARDUINO_USB_MODE=1 ;; for boards with serial-to-USB chip
   -D ARDUINO_USB_CDC_ON_BOOT=1 -D ARDUINO_USB_MODE=1      ;; for boards with USB-OTG connector only (USBCDC or "TinyUSB")
   -DBOARD_HAS_PSRAM
+  ${esp32.AR_build_flags}
 lib_deps = ${esp32s3.lib_deps}
+  ${esp32.AR_lib_deps}
 board_build.partitions = ${esp32.large_partitions}
 board_build.f_flash = 80000000L
 board_build.flash_mode = qio
@@ -586,10 +571,10 @@ monitor_filters = esp32_exception_decoder
 ;; For ESP32-S3 WROOM-2, a.k.a. ESP32-S3 DevKitC-1 v1.1
 ;; with >= 16MB FLASH and >= 8MB PSRAM (memory_type: opi_opi)
 platform = ${esp32s3.platform}
+platform_packages = ${esp32s3.platform_packages}
 board = esp32s3camlcd ;; this is the only standard board with "opi_opi"
 board_build.arduino.memory_type = opi_opi
 upload_speed = 921600
-custom_usermods = audioreactive
 build_unflags = ${common.build_unflags}
 build_flags = ${common.build_flags} ${esp32s3.build_flags} -D WLED_RELEASE_NAME=\"ESP32-S3_WROOM-2\"
   -D CONFIG_LITTLEFS_FOR_IDF_3_2 -D WLED_WATCHDOG_TIMEOUT=0
@@ -599,8 +584,10 @@ build_flags = ${common.build_flags} ${esp32s3.build_flags} -D WLED_RELEASE_NAME=
   -D LEDPIN=38 -D DATA_PINS=38 ;; buildin WS2812b LED
   -D BTNPIN=0 -D RLYPIN=16 -D IRPIN=17 -D AUDIOPIN=-1
   -D WLED_DEBUG
+  ${esp32.AR_build_flags}
   -D SR_DMTYPE=1 -D I2S_SDPIN=13 -D I2S_CKPIN=14 -D I2S_WSPIN=15 -D MCLK_PIN=4  ;; I2S mic
 lib_deps = ${esp32s3.lib_deps}
+  ${esp32.AR_lib_deps}
 
 board_build.partitions = ${esp32.extreme_partitions}
 board_upload.flash_size = 16MB
@@ -611,15 +598,17 @@ monitor_filters = esp32_exception_decoder
 ;; ESP32-S3, with 4MB FLASH and <= 4MB PSRAM (memory_type: qio_qspi)
 board = lolin_s3_mini ;; -S3 mini, 4MB flash 2MB PSRAM 
 platform = ${esp32s3.platform}
+platform_packages = ${esp32s3.platform_packages}
 upload_speed = 921600
-custom_usermods = audioreactive
 build_unflags = ${common.build_unflags}
 build_flags = ${common.build_flags} ${esp32s3.build_flags} -D WLED_RELEASE_NAME=\"ESP32-S3_4M_qspi\"
   -DARDUINO_USB_CDC_ON_BOOT=1 -DARDUINO_USB_MODE=1      ;; for boards with USB-OTG connector only (USBCDC or "TinyUSB")
   -DBOARD_HAS_PSRAM
   -DLOLIN_WIFI_FIX ; seems to work much better with this
   -D WLED_WATCHDOG_TIMEOUT=0
+  ${esp32.AR_build_flags}
 lib_deps = ${esp32s3.lib_deps}
+  ${esp32.AR_lib_deps}
 board_build.partitions = ${esp32.default_partitions}
 board_build.f_flash = 80000000L
 board_build.flash_mode = qio
@@ -627,11 +616,11 @@ monitor_filters = esp32_exception_decoder
 
 [env:lolin_s2_mini]
 platform = ${esp32s2.platform}
+platform_packages = ${esp32s2.platform_packages}
 board = lolin_s2_mini
 board_build.partitions = ${esp32.default_partitions}
 board_build.flash_mode = qio
 board_build.f_flash = 80000000L
-custom_usermods = audioreactive
 build_unflags = ${common.build_unflags}
 build_flags = ${common.build_flags} ${esp32s2.build_flags} -D WLED_RELEASE_NAME=\"ESP32-S2\"
   -DARDUINO_USB_CDC_ON_BOOT=1
@@ -640,6 +629,7 @@ build_flags = ${common.build_flags} ${esp32s2.build_flags} -D WLED_RELEASE_NAME=
   -DBOARD_HAS_PSRAM
   -DLOLIN_WIFI_FIX ; seems to work much better with this
   -D WLED_WATCHDOG_TIMEOUT=0
+  -D CONFIG_ASYNC_TCP_USE_WDT=0
   -D DATA_PINS=16
   -D HW_PIN_SCL=35
   -D HW_PIN_SDA=33
@@ -647,17 +637,6 @@ build_flags = ${common.build_flags} ${esp32s2.build_flags} -D WLED_RELEASE_NAME=
   -D HW_PIN_DATASPI=11
   -D HW_PIN_MISOSPI=9
 ;  -D STATUSLED=15
+  ${esp32.AR_build_flags}
 lib_deps = ${esp32s2.lib_deps}
-
-
-[env:usermods]
-board = esp32dev
-platform = ${esp32_idf_V4.platform}
-build_unflags = ${common.build_unflags}
-build_flags = ${common.build_flags} ${esp32_idf_V4.build_flags} -D WLED_RELEASE_NAME=\"ESP32_USERMODS\"
-  -DTOUCH_CS=9
-lib_deps = ${esp32_idf_V4.lib_deps}
-monitor_filters = esp32_exception_decoder
-board_build.flash_mode = dio
-; custom_usermods = *every folder with library.json* -- injected by pio-scripts/load_usermods.py
-board_build.partitions = ${esp32.extreme_partitions}  ; We're gonna need a bigger boat
+  ${esp32.AR_lib_deps}

platformio_override.sample.ini

@@ -34,7 +34,7 @@ lib_deps = ${esp8266.lib_deps}
 build_unflags = ${common.build_unflags}
 build_flags = ${common.build_flags} ${esp8266.build_flags}
 ;
-; *** To use the below defines/overrides, copy and paste each onto its own line just below build_flags in the section above.
+; *** To use the below defines/overrides, copy and paste each onto it's own line just below build_flags in the section above.
 ; 
 ; Set a release name that may be used to distinguish required binary for flashing
 ;   -D WLED_RELEASE_NAME=\"ESP32_MULTI_USREMODS\"
@@ -280,7 +280,7 @@ lib_deps = ${esp32s2.lib_deps}
 [env:esp32s3dev_8MB_PSRAM_qspi]
 ;; ESP32-TinyS3 development board, with 8MB FLASH and PSRAM (memory_type: qio_qspi)
 extends = env:esp32s3dev_8MB_PSRAM_opi
-;board = um_tinys3 ;    -> needs workaround from https://github.com/wled-dev/WLED/pull/2905#issuecomment-1328049860
+;board = um_tinys3 ;    -> needs workaround from https://github.com/Aircoookie/WLED/pull/2905#issuecomment-1328049860
 board = esp32-s3-devkitc-1 ;; generic dev board; the next line adds PSRAM support
 board_build.arduino.memory_type = qio_qspi ;; use with PSRAM: 2MB or  4MB
 
@@ -506,8 +506,9 @@ lib_deps = ${esp8266.lib_deps}
 extends = esp32              ;; use default esp32 platform
 board = esp32dev
 upload_speed = 921600
-custom_usermods = ${env:esp32dev.custom_usermods} RTC EleksTube_IPS
 build_flags = ${common.build_flags} ${esp32.build_flags} -D WLED_DISABLE_BROWNOUT_DET -D WLED_DISABLE_INFRARED
+  -D USERMOD_RTC
+  -D USERMOD_ELEKSTUBE_IPS
   -D DATA_PINS=12
   -D RLYPIN=27
   -D BTNPIN=34
@@ -525,14 +526,6 @@ build_flags = ${common.build_flags} ${esp32.build_flags} -D WLED_DISABLE_BROWNOU
   -D SPI_FREQUENCY=40000000
   -D USER_SETUP_LOADED
 monitor_filters = esp32_exception_decoder
-
-# ------------------------------------------------------------------------------
-# Usermod examples
-# ------------------------------------------------------------------------------
-
-# 433MHz RF remote example for esp32dev
-[env:esp32dev_usermod_RF433]
-extends = env:esp32dev
-build_flags = ${env:esp32dev.build_flags} -D USERMOD_RF433
-lib_deps = ${env:esp32dev.lib_deps}
-  sui77/rc-switch @ 2.6.4
+lib_deps =
+  ${esp32.lib_deps}
+  TFT_eSPI @ 2.5.33  ;; this is the last version that compiles with the WLED default framework - newer versions require platform = espressif32 @ ^6.3.2

readme.md

@@ -1,18 +1,18 @@
 <p align="center">
   <img src="/images/wled_logo_akemi.png">
-  <a href="https://github.com/wled-dev/WLED/releases"><img src="https://img.shields.io/github/release/wled-dev/WLED.svg?style=flat-square"></a>
-  <a href="https://raw.githubusercontent.com/wled-dev/WLED/main/LICENSE"><img src="https://img.shields.io/github/license/wled-dev/wled?color=blue&style=flat-square"></a>
+  <a href="https://github.com/Aircoookie/WLED/releases"><img src="https://img.shields.io/github/release/Aircoookie/WLED.svg?style=flat-square"></a>
+  <a href="https://raw.githubusercontent.com/Aircoookie/WLED/master/LICENSE"><img src="https://img.shields.io/github/license/Aircoookie/wled?color=blue&style=flat-square"></a>
   <a href="https://wled.discourse.group"><img src="https://img.shields.io/discourse/topics?colorB=blue&label=forum&server=https%3A%2F%2Fwled.discourse.group%2F&style=flat-square"></a>
   <a href="https://discord.gg/QAh7wJHrRM"><img src="https://img.shields.io/discord/473448917040758787.svg?colorB=blue&label=discord&style=flat-square"></a>
   <a href="https://kno.wled.ge"><img src="https://img.shields.io/badge/quick_start-wiki-blue.svg?style=flat-square"></a>
   <a href="https://github.com/Aircoookie/WLED-App"><img src="https://img.shields.io/badge/app-wled-blue.svg?style=flat-square"></a>
-  <a href="https://gitpod.io/#https://github.com/wled-dev/WLED"><img src="https://img.shields.io/badge/Gitpod-ready--to--code-blue?style=flat-square&logo=gitpod"></a>
+  <a href="https://gitpod.io/#https://github.com/Aircoookie/WLED"><img src="https://img.shields.io/badge/Gitpod-ready--to--code-blue?style=flat-square&logo=gitpod"></a>
 
   </p>
 
 # Welcome to my project WLED! ✨
 
-A fast and feature-rich implementation of an ESP32 and ESP8266 webserver to control NeoPixel (WS2812B, WS2811, SK6812) LEDs or also SPI based chipsets like the WS2801 and APA102!
+A fast and feature-rich implementation of an ESP8266/ESP32 webserver to control NeoPixel (WS2812B, WS2811, SK6812) LEDs or also SPI based chipsets like the WS2801 and APA102!
 
 ## ⚙️ Features
 - WS2812FX library with more than 100 special effects  
@@ -21,7 +21,7 @@ A fast and feature-rich implementation of an ESP32 and ESP8266 webserver to cont
 - Segments to set different effects and colors to user defined parts of the LED string  
 - Settings page - configuration via the network  
 - Access Point and station mode - automatic failsafe AP  
-- [Up to 10 LED outputs](https://kno.wled.ge/features/multi-strip/#esp32) per instance
+- Up to 10 LED outputs per instance
 - Support for RGBW strips  
 - Up to 250 user presets to save and load colors/effects easily, supports cycling through them.  
 - Presets can be used to automatically execute API calls  

requirements.in

@@ -1 +1 @@
-platformio>=6.1.17
+platformio

requirements.txt

@@ -1,25 +1,27 @@
 #
-# This file is autogenerated by pip-compile with Python 3.11
+# This file is autogenerated by pip-compile with Python 3.12
 # by the following command:
 #
-#    pip-compile requirements.in
+#    pip-compile
 #
 ajsonrpc==1.2.0
     # via platformio
-anyio==4.8.0
+anyio==4.6.0
     # via starlette
-bottle==0.13.2
+bottle==0.13.1
     # via platformio
-certifi==2025.1.31
+certifi==2024.8.30
     # via requests
-charset-normalizer==3.4.1
+charset-normalizer==3.3.2
     # via requests
-click==8.1.8
+click==8.1.7
     # via
     #   platformio
     #   uvicorn
 colorama==0.4.6
-    # via platformio
+    # via
+    #   click
+    #   platformio
 h11==0.14.0
     # via
     #   uvicorn
@@ -28,13 +30,13 @@ idna==3.10
     # via
     #   anyio
     #   requests
-marshmallow==3.26.1
+marshmallow==3.22.0
     # via platformio
-packaging==24.2
+packaging==24.1
     # via marshmallow
-platformio==6.1.17
+platformio==6.1.16
     # via -r requirements.in
-pyelftools==0.32
+pyelftools==0.31
     # via platformio
 pyserial==3.5
     # via platformio
@@ -44,15 +46,13 @@ semantic-version==2.10.0
     # via platformio
 sniffio==1.3.1
     # via anyio
-starlette==0.45.3
+starlette==0.39.1
     # via platformio
 tabulate==0.9.0
     # via platformio
-typing-extensions==4.12.2
-    # via anyio
-urllib3==2.3.0
+urllib3==2.2.3
     # via requests
-uvicorn==0.34.0
+uvicorn==0.30.6
     # via platformio
 wsproto==1.2.0
     # via platformio

tools/cdata.js

@@ -17,7 +17,7 @@
 
 const fs = require("node:fs");
 const path = require("path");
-const inline = require("web-resource-inliner");
+const inliner = require("inliner");
 const zlib = require("node:zlib");
 const CleanCSS = require("clean-css");
 const minifyHtml = require("html-minifier-terser").minify;
@@ -89,7 +89,7 @@ function adoptVersionAndRepo(html) {
     repoUrl = repoUrl.replace(/^git\+/, "");
     repoUrl = repoUrl.replace(/\.git$/, "");
     html = html.replaceAll("https://github.com/atuline/WLED", repoUrl);
-    html = html.replaceAll("https://github.com/wled-dev/WLED", repoUrl);
+    html = html.replaceAll("https://github.com/Aircoookie/WLED", repoUrl);
   }
   let version = packageJson.version;
   if (version) {
@@ -128,26 +128,21 @@ async function minify(str, type = "plain") {
 
 async function writeHtmlGzipped(sourceFile, resultFile, page) {
   console.info("Reading " + sourceFile);
-  inline.html({
-    fileContent: fs.readFileSync(sourceFile, "utf8"),
-    relativeTo: path.dirname(sourceFile),
-    strict: true,
-  },
-    async function (error, html) {
-      if (error) throw error;
+  new inliner(sourceFile, async function (error, html) {
+    if (error) throw error;
 
-      html = adoptVersionAndRepo(html);
-      const originalLength = html.length;
-      html = await minify(html, "html-minify");
-      const result = zlib.gzipSync(html, { level: zlib.constants.Z_BEST_COMPRESSION });
-      console.info("Minified and compressed " + sourceFile + " from " + originalLength + " to " + result.length + " bytes");
-      const array = hexdump(result);
-      let src = singleHeader;
-      src += `const uint16_t PAGE_${page}_L = ${result.length};\n`;
-      src += `const uint8_t PAGE_${page}[] PROGMEM = {\n${array}\n};\n\n`;
-      console.info("Writing " + resultFile);
-      fs.writeFileSync(resultFile, src);
-    });
+    html = adoptVersionAndRepo(html);
+    const originalLength = html.length;
+    html = await minify(html, "html-minify");
+    const result = zlib.gzipSync(html, { level: zlib.constants.Z_BEST_COMPRESSION });
+    console.info("Minified and compressed " + sourceFile + " from " + originalLength + " to " + result.length + " bytes");
+    const array = hexdump(result);
+    let src = singleHeader;
+    src += `const uint16_t PAGE_${page}_L = ${result.length};\n`;
+    src += `const uint8_t PAGE_${page}[] PROGMEM = {\n${array}\n};\n\n`;
+    console.info("Writing " + resultFile);
+    fs.writeFileSync(resultFile, src);
+  });
 }
 
 async function specToChunk(srcDir, s) {

tools/stress_test.sh

@@ -27,7 +27,6 @@ read -a JSON_TINY_TARGETS <<< $(replicate "json/nodes")
 read -a JSON_SMALL_TARGETS <<< $(replicate "json/info")
 read -a JSON_LARGE_TARGETS <<< $(replicate "json/si")
 read -a JSON_LARGER_TARGETS <<< $(replicate "json/fxdata")
-read -a INDEX_TARGETS <<< $(replicate "")
 
 # Expand target URLS to full arguments for curl
 TARGETS=(${TARGET_STR[@]})

usermods/ADS1115_v2/library.json

@@ -1,7 +0,0 @@
-{
-  "name:": "ADS1115_v2",
-  "dependencies": {
-    "Adafruit BusIO": "https://github.com/adafruit/Adafruit_BusIO#1.13.2",
-    "Adafruit ADS1X15": "https://github.com/adafruit/Adafruit_ADS1X15#2.4.0"
-  }
-}

usermods/ADS1115_v2/readme.md

@@ -6,5 +6,5 @@ Configuration is performed via the Usermod menu. There are no parameters to set
 
 ## Installation 
 
-Add 'ADS1115' to `custom_usermods` in your platformio environment.
-
+Add the build flag `-D USERMOD_ADS1115` to your platformio environment.
+Uncomment libraries with comment `#For ADS1115 sensor uncomment following`

usermods/ADS1115_v2/usermod_ads1115.h

@@ -1,3 +1,5 @@
+#pragma once
+
 #include "wled.h"
 #include <Adafruit_ADS1X15.h>
 #include <math.h>
@@ -250,7 +252,4 @@ class ADS1115Usermod : public Usermod {
         int16_t results = ads.getLastConversionResults();
         readings[activeChannel] = ads.computeVolts(results);
     }
-};
-
-static ADS1115Usermod ads1115_v2;
-REGISTER_USERMOD(ads1115_v2);
+};

usermods/AHT10_v2/README.md

@@ -22,9 +22,15 @@ Dependencies, These must be added under `lib_deps` in your `platform.ini` (or `p
 
 # Compiling
 
-To enable, add 'AHT10' to `custom_usermods` in your platformio encrionment  (e.g. in `platformio_override.ini`)
+To enable, compile with `USERMOD_AHT10` defined  (e.g. in `platformio_override.ini`)
 ```ini
 [env:aht10_example]
 extends = env:esp32dev
-custom_usermods = ${env:esp32dev.custom_usermods} AHT10
+build_flags =
+  ${common.build_flags} ${esp32.build_flags}
+  -D USERMOD_AHT10
+  ; -D USERMOD_AHT10_DEBUG ; -- add a debug status to the info modal
+lib_deps = 
+  ${esp32.lib_deps}
+  enjoyneering/AHT10@~1.1.0
 ```

usermods/AHT10_v2/library.json

@@ -1,6 +0,0 @@
-{
-  "name:": "AHT10_v2",
-  "dependencies": {
-    "enjoyneering/AHT10":"~1.1.0"
-  }
-}

usermods/AHT10_v2/platformio_override.ini

@@ -2,4 +2,8 @@
 extends = env:esp32dev
 build_flags =
   ${common.build_flags} ${esp32.build_flags}
+  -D USERMOD_AHT10
   ; -D USERMOD_AHT10_DEBUG ; -- add a debug status to the info modal
+lib_deps = 
+  ${esp32.lib_deps}
+  enjoyneering/AHT10@~1.1.0

usermods/AHT10_v2/usermod_aht10.h

@@ -1,3 +1,5 @@
+#pragma once
+
 #include "wled.h"
 #include <AHT10.h>
 
@@ -52,6 +54,12 @@ private:
     _lastTemperature = 0;
   }
 
+  ~UsermodAHT10()
+  {
+    delete _aht;
+    _aht = nullptr;
+  }
+
 #ifndef WLED_DISABLE_MQTT
   void mqttInitialize()
   {
@@ -314,15 +322,6 @@ public:
     _initDone = true;
     return configComplete;
   }
-
-  ~UsermodAHT10()
-  {
-    delete _aht;
-    _aht = nullptr;
-  }
 };
 
-const char UsermodAHT10::_name[] PROGMEM = "AHTxx";
-
-static UsermodAHT10 aht10_v2;
-REGISTER_USERMOD(aht10_v2);
+const char UsermodAHT10::_name[] PROGMEM = "AHTxx";

usermods/Analog_Clock/Analog_Clock.h

@@ -1,3 +1,4 @@
+#pragma once
 #include "wled.h"
 
 /*
@@ -253,7 +254,3 @@ public:
         return USERMOD_ID_ANALOG_CLOCK;
     }
 };
-
-
-static AnalogClockUsermod analog_clock;
-REGISTER_USERMOD(analog_clock);

usermods/Analog_Clock/library.json

@@ -1,3 +0,0 @@
-{
-  "name:": "Analog_Clock"
-}

usermods/Animated_Staircase/Animated_Staircase.h

@@ -7,6 +7,7 @@
  * 
  * See the accompanying README.md file for more info.
  */
+#pragma once
 #include "wled.h"
 
 class Animated_Staircase : public Usermod {
@@ -561,7 +562,3 @@ const char Animated_Staircase::_bottomEcho_pin[]            PROGMEM = "bottomEch
 const char Animated_Staircase::_topEchoCm[]                 PROGMEM = "top-dist-cm";
 const char Animated_Staircase::_bottomEchoCm[]              PROGMEM = "bottom-dist-cm";
 const char Animated_Staircase::_togglePower[]               PROGMEM = "toggle-on-off";
-
-
-static Animated_Staircase animated_staircase;
-REGISTER_USERMOD(animated_staircase);

usermods/Animated_Staircase/README.md

@@ -15,9 +15,10 @@ To include this usermod in your WLED setup, you have to be able to [compile WLED
 
 Before compiling, you have to make the following modifications:
 
-Edit your environment in `platformio_override.ini`
-1. Open `platformio_override.ini`
-2. add `Animated_Staircase` to the `custom_usermods` line for your environment
+Edit `usermods_list.cpp`:
+1. Open `wled00/usermods_list.cpp`
+2. add `#include "../usermods/Animated_Staircase/Animated_Staircase.h"` to the top of the file
+3. add `UsermodManager::add(new Animated_Staircase());` to the end of the `void registerUsermods()` function.
 
 You can configure usermod using the Usermods settings page.
 Please enter GPIO pins for PIR or ultrasonic sensors (trigger and echo).

usermods/Animated_Staircase/library.json

@@ -1,3 +0,0 @@
-{
-  "name:": "Animated_Staircase"
-}

usermods/BH1750_v2/library.json

@@ -1,6 +0,0 @@
-{
-  "name:": "BH1750_v2",
-  "dependencies": {
-    "claws/BH1750":"^1.2.0"
-  }
-}

usermods/BH1750_v2/readme.md

@@ -6,11 +6,22 @@ The luminance is displayed in both the Info section of the web UI, as well as pu
 ## Dependencies
 - Libraries
   - `claws/BH1750 @^1.2.0`
+  - This must be added under `lib_deps` in your `platformio.ini` (or `platformio_override.ini`).
 - Data is published over MQTT - make sure you've enabled the MQTT sync interface.
 
 ## Compilation
 
-To enable, compile with `BH1750` in `custom_usermods` (e.g. in `platformio_override.ini`)
+To enable, compile with `USERMOD_BH1750` defined  (e.g. in `platformio_override.ini`)
+```ini
+[env:usermod_BH1750_d1_mini]
+extends = env:d1_mini
+build_flags =
+    ${common.build_flags_esp8266}
+    -D USERMOD_BH1750
+lib_deps = 
+    ${esp8266.lib_deps}
+    claws/BH1750 @ ^1.2.0
+```
 
 ### Configuration Options
 The following settings can be set at compile-time but are configurable on the usermod menu (except First Measurement time):

usermods/BH1750_v2/usermod_bh1750.h

@@ -1,13 +1,15 @@
 // force the compiler to show a warning to confirm that this file is included
 #warning **** Included USERMOD_BH1750 ****
 
-#include "wled.h"
-#include <BH1750.h>
-
-#ifdef WLED_DISABLE_MQTT
+#ifndef WLED_ENABLE_MQTT
 #error "This user mod requires MQTT to be enabled."
 #endif
 
+#pragma once
+
+#include "wled.h"
+#include <BH1750.h>
+
 // the max frequency to check photoresistor, 10 seconds
 #ifndef USERMOD_BH1750_MAX_MEASUREMENT_INTERVAL
 #define USERMOD_BH1750_MAX_MEASUREMENT_INTERVAL 10000
@@ -248,7 +250,3 @@ const char Usermod_BH1750::_maxReadInterval[] PROGMEM = "max-read-interval-ms";
 const char Usermod_BH1750::_minReadInterval[] PROGMEM = "min-read-interval-ms";
 const char Usermod_BH1750::_HomeAssistantDiscovery[] PROGMEM = "HomeAssistantDiscoveryLux";
 const char Usermod_BH1750::_offset[] PROGMEM = "offset-lx";
-
-
-static Usermod_BH1750 bh1750_v2;
-REGISTER_USERMOD(bh1750_v2);

usermods/BME280_v2/README.md

@@ -22,6 +22,7 @@ Dependencies
 - Libraries
   - `BME280@~3.0.0` (by [finitespace](https://github.com/finitespace/BME280))
   - `Wire`
+  - These must be added under `lib_deps` in your `platform.ini` (or `platform_override.ini`).
 - Data is published over MQTT - make sure you've enabled the MQTT sync interface.
 - This usermod also writes to serial (GPIO1 on ESP8266). Please make sure nothing else is listening to the serial TX pin or your board will get confused by log messages!
 
@@ -39,11 +40,17 @@ Methods also exist to read the read/calculated values from other WLED modules th
 
 # Compiling
 
-To enable, add `BME280_v2` to your `custom_usermods`  (e.g. in `platformio_override.ini`)
+To enable, compile with `USERMOD_BME280` defined  (e.g. in `platformio_override.ini`)
 ```ini
 [env:usermod_bme280_d1_mini]
 extends = env:d1_mini
-custom_usermods = ${env:d1_mini.custom_usermods} BME280_v2
+build_flags =
+  ${common.build_flags_esp8266}
+  -D USERMOD_BME280
+lib_deps = 
+  ${esp8266.lib_deps}
+  BME280@~3.0.0
+  Wire
 ```
 
 

usermods/BME280_v2/library.json

@@ -1,6 +0,0 @@
-{
-  "name:": "BME280_v2",
-  "dependencies": {
-    "finitespace/BME280":"~3.0.0"
-  }
-}

usermods/BME280_v2/usermod_bme280.h

@@ -1,15 +1,17 @@
 // force the compiler to show a warning to confirm that this file is included
 #warning **** Included USERMOD_BME280 version 2.0 ****
 
+#ifndef WLED_ENABLE_MQTT
+#error "This user mod requires MQTT to be enabled."
+#endif
+
+#pragma once
+
 #include "wled.h"
 #include <Arduino.h>
 #include <BME280I2C.h>               // BME280 sensor
 #include <EnvironmentCalculations.h> // BME280 extended measurements
 
-#ifdef WLED_DISABLE_MQTT
-#error "This user mod requires MQTT to be enabled."
-#endif
-
 class UsermodBME280 : public Usermod
 {
 private:
@@ -239,7 +241,7 @@ public:
         // from the UI and values read from sensor, then publish to broker
         if (temperature != lastTemperature || PublishAlways)
         {
-          publishMqtt("temperature", String(temperature, (unsigned) TemperatureDecimals).c_str());
+          publishMqtt("temperature", String(temperature, TemperatureDecimals).c_str());
         }
 
         lastTemperature = temperature; // Update last sensor temperature for next loop
@@ -252,17 +254,17 @@ public:
 
           if (humidity != lastHumidity || PublishAlways)
           {
-            publishMqtt("humidity", String(humidity, (unsigned) HumidityDecimals).c_str());
+            publishMqtt("humidity", String(humidity, HumidityDecimals).c_str());
           }
 
           if (heatIndex != lastHeatIndex || PublishAlways)
           {
-            publishMqtt("heat_index", String(heatIndex, (unsigned) TemperatureDecimals).c_str());
+            publishMqtt("heat_index", String(heatIndex, TemperatureDecimals).c_str());
           }
 
           if (dewPoint != lastDewPoint || PublishAlways)
           {
-            publishMqtt("dew_point", String(dewPoint, (unsigned) TemperatureDecimals).c_str());
+            publishMqtt("dew_point", String(dewPoint, TemperatureDecimals).c_str());
           }
 
           lastHumidity = humidity;
@@ -279,7 +281,7 @@ public:
 
         if (pressure != lastPressure || PublishAlways)
         {
-          publishMqtt("pressure", String(pressure, (unsigned) PressureDecimals).c_str());
+          publishMqtt("pressure", String(pressure, PressureDecimals).c_str());
         }
 
         lastPressure = pressure;
@@ -442,6 +444,7 @@ public:
     configComplete &= getJsonValue(top[F("PublishAlways")], PublishAlways, false);
     configComplete &= getJsonValue(top[F("UseCelsius")], UseCelsius, true);
     configComplete &= getJsonValue(top[F("HomeAssistantDiscovery")], HomeAssistantDiscovery, false);
+    tempScale = UseCelsius ? "°C" : "°F";
 
     DEBUG_PRINT(FPSTR(_name));
     if (!initDone) {
@@ -477,7 +480,3 @@ public:
 
 const char UsermodBME280::_name[]                      PROGMEM = "BME280/BMP280";
 const char UsermodBME280::_enabled[]                   PROGMEM = "enabled";
-
-
-static UsermodBME280 bme280_v2;
-REGISTER_USERMOD(bme280_v2);

usermods/BME68X_v2/README.md

@@ -1,70 +1,65 @@
 # Usermod BME68X
-
-This usermod was developed for a BME680/BME68X sensor. The BME68X is not compatible with the BME280/BMP280 chip. It has its own library. The original 'BSEC Software Library' from Bosch was used to develop the code. The measured values are displayed on the WLED info page.
+This usermod was developed for a BME680/BME68X sensor. The BME68X is not compatible with the BME280/BMP280 chip. It has its own library. The original 'BSEC Software Library' from Bosch was used to develop the code. The measured values are displayed on the WLED info page. 
 
 <p align="center"><img src="pics/pic1.png" style="width:60%;"></p>
 
 In addition, the values are published on MQTT if this is active. The topic used for this is: 'wled/[MQTT Client ID]'. The Client ID is set in the WLED MQTT settings.
-
 <p align="center"><img src="pics/pic2.png"></p>
 
 If you use HomeAssistance discovery, the device tree for HomeAssistance is created.  This is published under the topic 'homeassistant/sensor/[MQTT Client ID]' via MQTT.
-
 <p align="center"><img src="pics/pic3.png"></p>
 
 A device with the following sensors appears in HomeAssistant. Please note that MQTT must be activated in HomeAssistant.
-
 <p align="center"><img src="pics/pic4.png" style="width:60%;"></p>
 
-## Features
 
+## Features
 Raw sensor types
 
-Sensor		Accuracy	Scale		Range
------------------------------
+	Sensor		Accuracy	Scale		Range
+ 	--------------------------------------------------------------------------------------------------
+	Temperature	+/- 1.0		°C/°F		-40 to 85 °C
+	Humidity	+/- 3 		%		0 to 100 %
+	Pressure	+/- 1 		hPa		300 to 1100 hPa
+	Gas Resistance			Ohm
 
-Temperature	+/- 1.0		°C/°F		-40 to 85 °C
-Humidity	+/- 3 		%		0 to 100 %
-Pressure	+/- 1 		hPa		300 to 1100 hPa
-Gas Resistance			Ohm
 The BSEC Library calculates the following values via the gas resistance
 
-Sensor		Accuracy	Scale		Range
------------------------------
+	Sensor		Accuracy	Scale		Range
+ 	--------------------------------------------------------------------------------------------------
+	IAQ 						value between 0 and 500
+	Static IAQ 					same as IAQ but for permanently installed devices
+	CO2 				PPM
+	VOC 				PPM
+	Gas-Percentage 			%
+
 
-IAQ 						value between 0 and 500
-Static IAQ 					same as IAQ but for permanently installed devices
-CO2 				PPM
-VOC 				PPM
-Gas-Percentage 			%
 In addition the usermod calculates
 
-Sensor		Accuracy	Scale		Range
------------------------------
-
-Absolute humidity	 	g/m³
-Dew point 			°C/°F
+	Sensor		Accuracy	Scale		Range
+ 	--------------------------------------------------------------------------------------------------
+	Absolute humidity	 	g/m³
+	Dew point 			°C/°F
 
 ### IAQ (Indoor Air Quality)
-
-The IAQ is divided into the following value groups.
-
+The IAQ is divided into the following value groups. 
 <p align="center"><img src="pics/pic5.png"></p>
 
 For more detailed information, please consult the enclosed Bosch product description (BME680.pdf).
 
+
 ## Calibration of the device
 
-The gas sensor of the BME68X must be calibrated. This differs from the BME280, which does not require any calibration.
+The gas sensor of the BME68X must be calibrated. This differs from the BME280, which does not require any calibration. 
 There is a range of additional information for this, which the driver also provides. These values can be found in HomeAssistant under Diagnostics.
 
 - **STABILIZATION_STATUS**: Gas sensor stabilization status [boolean] Indicates initial stabilization status of the gas sensor element: stabilization is ongoing (0) or stabilization is finished (1).
 - **RUN_IN_STATUS**: 	Gas sensor run-in status [boolean] Indicates power-on stabilization status of the gas sensor element: stabilization is ongoing (0) or stabilization is finished (1)
 
-Furthermore, all GAS based values have their own accuracy value. These have the following meaning:
+Furthermore, all GAS based values have their own accuracy value. These have the following meaning: 
 
-- **Accuracy = 0** 	means the sensor is being stabilized (this can take a while on the first run)
-- **Accuracy = 1**	means that the previous measured values show too few differences and cannot be used for calibration. If the sensor is at accuracy 1 for too long, you must ensure that the ambient air is chaning. Opening the windows is fine. Or sometimes it is sufficient to breathe on the sensor for approx. 5 minutes.
+- **Accuracy = 0** 	means the sensor is being stabilized (this can take a while on the first run) 
+- **Accuracy = 1**	means that the previous measured values show too few differences and cannot be used for calibration. If the sensor is at accuracy 1 for too long, you must ensure that the ambient air is chaning. Opening the windows is fine. Or sometimes it is sufficient to breathe on the sensor for approx. 5 minutes. 
 - **Accuracy = 2**	means the sensor is currently calibrating.
 - **Accuracy = 3**	means that the sensor has been successfully calibrated. Once accuracy 3 is reached, the calibration data is automatically written to the file system. This calibration data will be used again at the next start and will speed up the calibration.
 
@@ -72,29 +67,28 @@ The IAQ index is therefore only meaningful if IAQ Accuracy = 3. In addition to t
 
 Reasonably reliable values are therefore only achieved when accuracy displays the value 3.
 
+
+
 ## Settings
-
-The settings of the usermods are set in the usermod section of wled.
-
+The settings of the usermods are set in the usermod section of wled. 
 <p align="center"><img src="pics/pic6.png"></p>
 
 The possible settings are
 
 - **Enable:**			Enables / disables the usermod
 - **I2C address:**		I2C address of the sensor. You can choose between 0X77 & 0X76. The default is 0x77.
-- **Interval:**			Specifies the interval of seconds at which the usermod should be executed. The default is every second.
-- **Pub Chages Only:**		If this item is active, the values are only published if they have changed since the last publication.
-- **Pub Accuracy:**		The Accuracy values associated with the gas values are also published.
-- **Pub Calib State:**		If this item is active, STABILIZATION_STATUS& RUN_IN_STATUS are also published.
+- **Interval:**			Specifies the interval of seconds at which the usermod should be executed. The default is every second. 
+- **Pub Chages Only:**		If this item is active, the values are only published if they have changed since the last publication. 
+- **Pub Accuracy:**		The Accuracy values associated with the gas values are also published. 
+- **Pub Calib State:**		If this item is active, STABILIZATION_STATUS& RUN_IN_STATUS are also published. 
 - **Temp Scale:**		Here you can choose between °C and °F.
-- **Temp Offset:**		The temperature offset is always set in °C. It must be converted for Fahrenheit.
-- **HA Discovery:**		If this item is active, the HomeAssistant sensor tree is created.
+- **Temp Offset:**		The temperature offset is always set in °C. It must be converted for Fahrenheit. 
+- **HA Discovery:**		If this item is active, the HomeAssistant sensor tree is created. 
 - **Pause While WLED Active:**	If WLED has many LEDs to calculate, the computing power may no longer be sufficient to calculate the LEDs and read the sensor data. The LEDs then hang for a few microseconds, which can be seen. If this point is active, no sensor data is fetched as long as WLED is running.
-- **Del Calibration Hist:**	If a check mark is set here, the calibration file saved in the file system is deleted when the settings are saved.
+- **Del Calibration Hist:**	If a check mark is set here, the calibration file saved in the file system is deleted when the settings are saved. 
 
 ### Sensors
-
-Applies to all sensors. The number of decimal places is set here. If the sensor is set to -1, it will no longer be published. In addition, the IAQ values can be activated here in verbal form.
+Applies to all sensors. The number of decimal places is set here. If the sensor is set to -1, it will no longer be published. In addition, the IAQ values can be activated here in verbal form. 
 
 It is recommended to use the Static IAQ for the IAQ values. This is recommended by Bosch for statically placed devices.
 
@@ -105,9 +99,8 @@ Data is published over MQTT - make sure you've enabled the MQTT sync interface.
 In addition to outputting via MQTT, you can read the values from the Info Screen on the dashboard page of the device's web interface.
 
 Methods also exist to read the read/calculated values from other WLED modules through code.
-
 - getTemperature();	The scale °C/°F is depended to the settings
-- getHumidity();
+- getHumidity();	
 - getPressure();
 - getGasResistance();
 - getAbsoluteHumidity();
@@ -125,36 +118,32 @@ Methods also exist to read the read/calculated values from other WLED modules th
 - getStabStatus();
 - getRunInStatus();
 
-## Compilation
 
-To enable, compile with `BME68X` in `custom_usermods` (e.g. in `platformio_override.ini`)
+## Compiling
 
-Example:
+To enable, compile with `USERMOD_BME68X` defined (e.g. in `platformio_override.ini`) and add the `BSEC Software Library` to the lib_deps.
 
-```[env:esp32_mySpecial]
-extends = env:esp32dev
-custom_usermods = ${env:esp32dev.custom_usermods} BME68X
+```
+[env:esp32-BME680]
+board = 		esp32dev
+platform = 		${esp32.platform}
+platform_packages = 	${esp32.platform_packages}
+lib_deps = 		${esp32.lib_deps}
+           		boschsensortec/BSEC Software Library @ ^1.8.1492      	; USERMOD: BME680                                          
+build_unflags = 	${common.build_unflags}
+build_flags = 		${common.build_flags_esp32} 
+              		-D USERMOD_BME68X                      			; USERMOD: BME680
 ```
 
 ## Revision History
-
 ### Version 1.0.0
-
 - First version of the BME68X_v user module
-
 ### Version 1.0.1
-
 - Rebased to WELD Version 0.15
 - Reworked some default settings
 - A problem with the default settings has been fixed
 
-### Version 1.0.2
-
-* Rebased to WELD Version 0.16
-* Fixed: Solved compilation problems related to some macro naming interferences.
-
 ## Known problems
-
 - MQTT goes online at device start. Shortly afterwards it goes offline and takes quite a while until it goes online again. The problem does not come from this user module, but from the WLED core.
 - If you save the settings often, WLED can get stuck.
 - If many LEDS are connected to WLED, reading the sensor can cause a small but noticeable hang. The "Pause While WLED Active" option was introduced as a workaround.

usermods/BME68X_v2/library.json

@@ -1,6 +0,0 @@
-{
-  "name:": "BME68X",
-  "dependencies": {
-    "boschsensortec/BSEC Software Library":"^1.8.1492"
-  }
-}

usermods/Battery/library.json

@@ -1,3 +0,0 @@
-{
-  "name:": "Battery"
-}

usermods/Battery/readme.md

@@ -23,7 +23,9 @@ Enables battery level monitoring of your project.
 
 ## 🎈 Installation
 
-In `platformio_override.ini` (or `platformio.ini`)<br>Under: `custom_usermods =`, add the line: `Battery`<br><br>[Example: platformio_override.ini](assets/installation_platformio_override_ini.png) |
+| **Option 1** | **Option 2** |
+|--------------|--------------|
+| In `wled00/my_config.h`<br>Add the line: `#define USERMOD_BATTERY`<br><br>[Example: my_config.h](assets/installation_my_config_h.png) | In `platformio_override.ini` (or `platformio.ini`)<br>Under: `build_flags =`, add the line: `-D USERMOD_BATTERY`<br><br>[Example: platformio_override.ini](assets/installation_platformio_override_ini.png) |
 
 <br><br>
 

usermods/Battery/usermod_v2_Battery.h

@@ -1,3 +1,5 @@
+#pragma once
+
 #include "wled.h"
 #include "battery_defaults.h"
 #include "UMBattery.h"
@@ -855,7 +857,3 @@ const char UsermodBattery::_preset[]        PROGMEM = "preset";
 const char UsermodBattery::_duration[]      PROGMEM = "duration";
 const char UsermodBattery::_init[]          PROGMEM = "init";
 const char UsermodBattery::_haDiscovery[]   PROGMEM = "HA-discovery";
-
-
-static UsermodBattery battery;
-REGISTER_USERMOD(battery);

usermods/Cronixie/library.json

@@ -1,3 +0,0 @@
-{
-  "name:": "Cronixie"
-}

usermods/Cronixie/readme.md

@@ -4,5 +4,5 @@ This usermod supports driving the Cronixie M and L clock kits by Diamex.
 
 ## Installation 
 
-Compile and upload after adding `Cronixie` to `custom_usermods` of your PlatformIO environment.  
+Compile and upload after adding `-D USERMOD_CRONIXIE` to `build_flags` of your PlatformIO environment.  
 Make sure the Auto Brightness Limiter is enabled at 420mA (!) and configure 60 WS281x LEDs.

usermods/Cronixie/usermod_cronixie.h

@@ -1,3 +1,5 @@
+#pragma once
+
 #include "wled.h"
 
 class UsermodCronixie : public Usermod {
@@ -297,7 +299,4 @@ class UsermodCronixie : public Usermod {
     {
       return USERMOD_ID_CRONIXIE;
     }
-};
-
-static UsermodCronixie cronixie;
-REGISTER_USERMOD(cronixie);
+};

usermods/DHT/library.json

@@ -1,7 +0,0 @@
-{
-  "name:": "DHT",
-  "build": { "libArchive": false},
-  "dependencies": {
-    "DHT_nonblocking":"https://github.com/alwynallan/DHT_nonblocking"
-  }
-}

usermods/DHT/platformio_override.ini

@@ -1,5 +1,6 @@
 ; Options
 ; -------
+; USERMOD_DHT                      - define this to have this user mod included wled00\usermods_list.cpp
 ; USERMOD_DHT_DHTTYPE              - DHT model: 11, 21, 22 for DHT11, DHT21, or DHT22, defaults to 22/DHT22
 ; USERMOD_DHT_PIN                  - pin to which DTH is connected, defaults to Q2 pin on QuinLed Dig-Uno's board
 ; USERMOD_DHT_CELSIUS              - define this to report temperatures in degrees celsious, otherwise fahrenheit will be reported
@@ -10,11 +11,13 @@
 
 [env:d1_mini_usermod_dht_C]
 extends = env:d1_mini
-custom_usermods = ${env:d1_mini.custom_usermods} DHT
-build_flags = ${env:d1_mini.build_flags} -D USERMOD_DHT_CELSIUS
+build_flags = ${env:d1_mini.build_flags} -D USERMOD_DHT -D USERMOD_DHT_CELSIUS
+lib_deps = ${env:d1_mini.lib_deps}
+    https://github.com/alwynallan/DHT_nonblocking
 
 [env:custom32_LEDPIN_16_usermod_dht_C]
 extends = env:custom32_LEDPIN_16
-custom_usermods = ${env:custom32_LEDPIN_16.custom_usermods} DHT
-build_flags = ${env:custom32_LEDPIN_16.build_flags} -D USERMOD_DHT_CELSIUS -D USERMOD_DHT_STATS
+build_flags = ${env:custom32_LEDPIN_16.build_flags} -D USERMOD_DHT -D USERMOD_DHT_CELSIUS -D USERMOD_DHT_STATS
+lib_deps = ${env.lib_deps}
+    https://github.com/alwynallan/DHT_nonblocking
 

usermods/DHT/readme.md

@@ -15,6 +15,7 @@ Copy the example `platformio_override.ini` to the root directory.  This file sho
 
 ### Define Your Options
 
+* `USERMOD_DHT`                      - define this to include this user mod wled00\usermods_list.cpp
 * `USERMOD_DHT_DHTTYPE`              - DHT model: 11, 21, 22 for DHT11, DHT21, or DHT22, defaults to 22/DHT22
 * `USERMOD_DHT_PIN`                  - pin to which DTH is connected, defaults to Q2 pin on QuinLed Dig-Uno's board
 * `USERMOD_DHT_CELSIUS`              - define this to report temperatures in degrees Celsius, otherwise Fahrenheit will be reported

usermods/DHT/usermod_dht.h

@@ -1,5 +1,7 @@
+#pragma once
+
 #include "wled.h"
-#ifdef WLED_DISABLE_MQTT
+#ifndef WLED_ENABLE_MQTT
 #error "This user mod requires MQTT to be enabled."
 #endif
 
@@ -243,7 +245,3 @@ class UsermodDHT : public Usermod {
     }
 
 };
-
-
-static UsermodDHT dht;
-REGISTER_USERMOD(dht);

usermods/EXAMPLE/library.json

@@ -1,4 +0,0 @@
-{
-  "name:": "EXAMPLE",
-  "dependencies": {}
-}

usermods/EXAMPLE_v2/readme.md

@@ -4,6 +4,7 @@ In this usermod file you can find the documentation on how to take advantage of
 
 ## Installation 
 
-Add `EXAMPLE` to `custom_usermods` in your PlatformIO environment and compile!
+Copy `usermod_v2_example.h` to the wled00 directory.  
+Uncomment the corresponding lines in `usermods_list.cpp` and compile!  
 _(You shouldn't need to actually install this, it does nothing useful)_
 

usermods/EXAMPLE_v2/usermod_v2_example.h

@@ -1,8 +1,10 @@
+#pragma once
+
 #include "wled.h"
 
 /*
  * Usermods allow you to add own functionality to WLED more easily
- * See: https://github.com/wled-dev/WLED/wiki/Add-own-functionality
+ * See: https://github.com/Aircoookie/WLED/wiki/Add-own-functionality
  * 
  * This is an example for a v2 usermod.
  * v2 usermods are class inheritance based and can (but don't have to) implement more functions, each of them is shown in this example.
@@ -402,6 +404,3 @@ void MyExampleUsermod::publishMqtt(const char* state, bool retain)
   }
 #endif
 }
-
-static MyExampleUsermod example_usermod;
-REGISTER_USERMOD(example_usermod);

usermods/EleksTube_IPS/library.json.disabled

@@ -1,7 +0,0 @@
-{
-  "name:": "EleksTube_IPS",
-  "dependencies": {
-    "TFT_eSPI" : "2.5.33"
-  } 
-}
-# Seems to add 300kb to the RAM requirement???

usermods/EleksTube_IPS/usermod_elekstube_ips.h

@@ -1,3 +1,4 @@
+#pragma once
 #include "TFTs.h"
 #include "wled.h"
 
@@ -155,7 +156,3 @@ class ElekstubeIPSUsermod : public Usermod {
 const char ElekstubeIPSUsermod::_name[]         PROGMEM = "EleksTubeIPS";
 const char ElekstubeIPSUsermod::_tubeSeg[]      PROGMEM = "tubeSegment";
 const char ElekstubeIPSUsermod::_digitOffset[]  PROGMEM = "digitOffset";
-
-
-static ElekstubeIPSUsermod elekstube_ips;
-REGISTER_USERMOD(elekstube_ips);

usermods/Enclosure_with_OLED_temp_ESP07/usermod.cpp

@@ -1,12 +1,11 @@
+#ifndef WLED_ENABLE_MQTT
+#error "This user mod requires MQTT to be enabled."
+#endif
+
 #include "wled.h"
 #include <Arduino.h>
 #include <U8x8lib.h> // from https://github.com/olikraus/u8g2/
 #include <DallasTemperature.h> //Dallastemperature sensor
-
-#ifdef WLED_DISABLE_MQTT
-#error "This user mod requires MQTT to be enabled."
-#endif
-
 //The SCL and SDA pins are defined here. 
 //Lolin32 boards use SCL=5 SDA=4 
 #define U8X8_PIN_SCL 5

usermods/Enclosure_with_OLED_temp_ESP07/usermod_bme280.cpp

@@ -1,13 +1,13 @@
+#ifndef WLED_ENABLE_MQTT
+#error "This user mod requires MQTT to be enabled."
+#endif
+
 #include "wled.h"
 #include <Arduino.h>
 #include <U8x8lib.h> // from https://github.com/olikraus/u8g2/
 #include <Wire.h>
 #include <BME280I2C.h> //BME280 sensor
 
-#ifdef WLED_DISABLE_MQTT
-#error "This user mod requires MQTT to be enabled."
-#endif
-
 void UpdateBME280Data();
 
 #define Celsius // Show temperature measurement in Celsius otherwise is in Fahrenheit 

usermods/Fix_unreachable_netservices_v2/library.json

@@ -1,4 +0,0 @@
-{
-  "name:": "Fix_unreachable_netservices_v2",
-  "platforms": ["espressif8266"]
-}

usermods/Fix_unreachable_netservices_v2/readme.md

@@ -30,6 +30,41 @@ The usermod supports the following state changes:
 
 ## Installation
 
-1. Add `Fix_unreachable_netservices` to `custom_usermods` in your PlatformIO environment.
+1. Copy the file `usermod_Fix_unreachable_netservices.h` to the `wled00` directory.
+2. Register the usermod by adding `#include "usermod_Fix_unreachable_netservices.h"` in the top and `registerUsermod(new FixUnreachableNetServices());` in the bottom of `usermods_list.cpp`.
+
+Example **usermods_list.cpp**:
+
+```cpp
+#include "wled.h"
+/*
+ * Register your v2 usermods here!
+ *   (for v1 usermods using just usermod.cpp, you can ignore this file)
+ */
+
+/*
+ * Add/uncomment your usermod filename here (and once more below)
+ * || || ||
+ * \/ \/ \/
+ */
+//#include "usermod_v2_example.h"
+//#include "usermod_temperature.h"
+//#include "usermod_v2_empty.h"
+#include  "usermod_Fix_unreachable_netservices.h"
+
+void registerUsermods()
+{
+  /*
+   * Add your usermod class name here
+   * || || ||
+   * \/ \/ \/
+   */
+  //UsermodManager::add(new MyExampleUsermod());
+  //UsermodManager::add(new UsermodTemperature());
+  //UsermodManager::add(new UsermodRenameMe());
+  UsermodManager::add(new FixUnreachableNetServices());
+
+}
+```
 
 Hopefully I can help someone with that - @gegu

usermods/Fix_unreachable_netservices_v2/usermod_Fix_unreachable_netservices.h

@@ -1,4 +1,12 @@
+#pragma once
+
 #include "wled.h"
+#if defined(ESP32)
+#warning "Usermod FixUnreachableNetServices works only with ESP8266 builds"
+class FixUnreachableNetServices : public Usermod
+{
+};
+#endif
 
 #if defined(ESP8266)
 #include <ping.h>
@@ -8,7 +16,7 @@
  * By this procedure the net services of WLED remains accessible in some problematic WLAN environments.
  * 
  * Usermods allow you to add own functionality to WLED more easily
- * See: https://github.com/wled-dev/WLED/wiki/Add-own-functionality
+ * See: https://github.com/Aircoookie/WLED/wiki/Add-own-functionality
  * 
  * v2 usermods are class inheritance based and can (but don't have to) implement more functions, each of them is shown in this example.
  * Multiple v2 usermods can be added to one compilation easily.
@@ -160,11 +168,4 @@ Delay <input type=\"number\" min=\"5\" max=\"300\" value=\"";
     return USERMOD_ID_FIXNETSERVICES;
   }
 };
-
-static FixUnreachableNetServices fix_unreachable_net_services;
-REGISTER_USERMOD(fix_unreachable_net_services);
-
-#else /* !ESP8266 */
-#warning "Usermod FixUnreachableNetServices works only with ESP8266 builds"
 #endif
-

usermods/INA226_v2/README.md

@@ -22,6 +22,13 @@ The following settings can be configured in the Usermod Menu:
 - **MqttPublishAlways**: Publish always, regardless if there is a change.
 - **MqttHomeAssistantDiscovery**: Enable Home Assistant discovery.
 
+## Dependencies
+
+These must be added under `lib_deps` in your `platform.ini` (or `platform_override.ini`).
+
+- Libraries
+  - `wollewald/INA226_WE@~1.2.9` (by [wollewald](https://registry.platformio.org/libraries/wollewald/INA226_WE))
+  - `Wire`
 
 ## Understanding Samples and Conversion Times
 
@@ -55,12 +62,16 @@ For detailed programming information and register configurations, refer to the [
 
 ## Compiling
 
-To enable, compile with `INA226` in `custom_usermods` (e.g. in `platformio_override.ini`).
+To enable, compile with `USERMOD_INA226` defined (e.g. in `platformio_override.ini`).
 
 ```ini
 [env:ina226_example]
 extends = env:esp32dev
-custom_usermods = ${env:esp32dev.custom_usermods} INA226
-build_flags = ${env:esp32dev.build_flags}
+build_flags =
+  ${common.build_flags} ${esp32.build_flags}
+  -D USERMOD_INA226
   ; -D USERMOD_INA226_DEBUG ; -- add a debug status to the info modal
+lib_deps = 
+  ${esp32.lib_deps}
+  wollewald/INA226_WE@~1.2.9
 ```

usermods/INA226_v2/library.json

@@ -1,6 +0,0 @@
-{
-  "name:": "INA226_v2",
-  "dependencies": {
-    "wollewald/INA226_WE":"~1.2.9"
-  }
-}

usermods/INA226_v2/platformio_override.ini

@@ -1,6 +1,9 @@
 [env:ina226_example]
 extends = env:esp32dev
-custom_usermods = ${env:esp32dev.custom_usermods} INA226_v2
 build_flags =
-  ${env:esp32dev.build_flags}
+  ${common.build_flags} ${esp32.build_flags}
+  -D USERMOD_INA226
   ; -D USERMOD_INA226_DEBUG ; -- add a debug status to the info modal
+lib_deps = 
+  ${esp32.lib_deps}
+  wollewald/INA226_WE@~1.2.9

usermods/INA226_v2/usermod_ina226.h

@@ -1,3 +1,5 @@
+#pragma once
+
 #include "wled.h"
 #include <INA226_WE.h>
 
@@ -208,6 +210,12 @@ private:
         }
     }
 
+    ~UsermodINA226()
+    {
+        delete _ina226;
+        _ina226 = nullptr;
+    }
+
 #ifndef WLED_DISABLE_MQTT
     void mqttInitialize()
     {
@@ -543,17 +551,6 @@ public:
         _initDone = true;
         return configComplete;
     }
-
-    ~UsermodINA226()
-    {
-        delete _ina226;
-        _ina226 = nullptr;
-    }
-
 };
 
 const char UsermodINA226::_name[] PROGMEM = "INA226";
-
-
-static UsermodINA226 ina226_v2;
-REGISTER_USERMOD(ina226_v2);

usermods/Internal_Temperature_v2/library.json

@@ -1,3 +0,0 @@
-{
-  "name:": "Internal_Temperature_v2"
-}

usermods/Internal_Temperature_v2/readme.md

@@ -23,7 +23,8 @@
 
 
 ## Installation
-- Add `Internal_Temperature` to `custom_usermods` in your `platformio.ini` (or `platformio_override.ini`).
+- Add a build flag `-D USERMOD_INTERNAL_TEMPERATURE` to your `platformio.ini` (or `platformio_override.ini`).
+
 
 ## 📝 Change Log
 

usermods/Internal_Temperature_v2/usermod_internal_temperature.h

@@ -1,3 +1,5 @@
+#pragma once
+
 #include "wled.h"
 
 class InternalTemperatureUsermod : public Usermod
@@ -48,7 +50,7 @@ public:
 #else                                    // ESP32 ESP32S3 and ESP32C3
     temperature = roundf(temperatureRead() * 10) / 10;
 #endif
- if(presetToActivate != 0){
+
     // Check if temperature has exceeded the activation threshold
     if (temperature >= activationThreshold) {
       // Update the state flag if not already set
@@ -56,7 +58,7 @@ public:
         isAboveThreshold = true;
         }
       // Check if a 'high temperature' preset is configured and it's not already active
-      if (currentPreset != presetToActivate) {
+      if (presetToActivate != 0 && currentPreset != presetToActivate) {
         // If a playlist is active, store it for reactivation later
         if (currentPlaylist > 0) {
           previousPlaylist = currentPlaylist;
@@ -99,7 +101,6 @@ public:
           }
         }
       }
- }
 
 #ifndef WLED_DISABLE_MQTT
     if (WLED_MQTT_CONNECTED)
@@ -191,7 +192,4 @@ void InternalTemperatureUsermod::publishMqtt(const char *state, bool retain)
     mqtt->publish(subuf, 0, retain, state);
   }
 #endif
-}
-
-static InternalTemperatureUsermod internal_temperature_v2;
-REGISTER_USERMOD(internal_temperature_v2);
+}

usermods/LD2410_v2/library.json

@@ -1,6 +0,0 @@
-{
-  "name:": "LD2410_v2",
-  "dependencies": {
-    "ncmreynolds/ld2410":"^0.1.3"
-  }
-}

usermods/LD2410_v2/readme.md

@@ -10,15 +10,21 @@ The movement and presence state are displayed in both the Info section of the we
 ## Dependencies
 - Libraries
   - `ncmreynolds/ld2410@^0.1.3`
+  - This must be added under `lib_deps` in your `platformio.ini` (or `platformio_override.ini`).
 - Data is published over MQTT - make sure you've enabled the MQTT sync interface.
 
 ## Compilation
 
-To enable, compile with `LD2140` in `custom_usermods` (e.g. in `platformio_override.ini`)
+To enable, compile with `USERMOD_LD2410` defined  (e.g. in `platformio_override.ini`)
 ```ini
 [env:usermod_USERMOD_LD2410_esp32dev]
 extends = env:esp32dev
-custom_usermods = ${env:esp32dev.custom_usermods} LD2140
+build_flags =
+    ${common.build_flags_esp32}
+    -D USERMOD_LD2410
+lib_deps = 
+    ${esp32.lib_deps}
+    ncmreynolds/ld2410@^0.1.3
 ```
 
 ### Configuration Options

usermods/LD2410_v2/usermod_ld2410.h

@@ -1,10 +1,14 @@
-#include "wled.h"
-#include <ld2410.h>
+#warning **** Included USERMOD_LD2410 ****
 
-#ifdef WLED_DISABLE_MQTT
+#ifndef WLED_ENABLE_MQTT
 #error "This user mod requires MQTT to be enabled."
 #endif
 
+#pragma once
+
+#include "wled.h"
+#include <ld2410.h>
+
 class LD2410Usermod : public Usermod {
 
   private:
@@ -231,7 +235,3 @@ void LD2410Usermod::publishMqtt(const char* topic, const char* state, bool retai
   }
 #endif
 }
-
-
-static LD2410Usermod ld2410_v2;
-REGISTER_USERMOD(ld2410_v2);

usermods/LDR_Dusk_Dawn_v2/README.md

@@ -2,14 +2,13 @@
 This usermod will obtain readings from a Light Dependent Resistor (LDR) and will turn on/off specific presets based on those readings. This is useful for exterior lighting situations where you want the lights to only be on when it is dark out.
 
 # Installation
-Add "LDR_Dusk_Dawn" to your platformio.ini environment's custom_usermods and build.
+Add "-D USERMOD_LDR_DUSK_DAWN" to your platformio.ini [common] build_flags and build.
 
 Example:
 ```
-[env:usermod_LDR_Dusk_Dawn_esp32dev]
-extends = env:esp32dev
-custom_usermods = ${env:esp32dev.custom_usermods} 
-  LDR_Dusk_Dawn   # Enable LDR Dusk Dawn Usermod
+[common]
+build_flags =
+  -D USERMOD_LDR_DUSK_DAWN   # Enable LDR Dusk Dawn Usermod
 ```
 
 # Usermod Settings

usermods/LDR_Dusk_Dawn_v2/library.json

@@ -1,3 +0,0 @@
-{
-  "name:": "LDR_Dusk_Dawn_v2"
-}

usermods/LDR_Dusk_Dawn_v2/usermod_LDR_Dusk_Dawn_v2.h

@@ -1,3 +1,4 @@
+#pragma once
 #include "wled.h"
 
 #ifndef ARDUINO_ARCH_ESP32
@@ -150,7 +151,3 @@ class LDR_Dusk_Dawn_v2 : public Usermod {
 };
 
 const char LDR_Dusk_Dawn_v2::_name[]    PROGMEM = "LDR_Dusk_Dawn_v2";
-
-
-static LDR_Dusk_Dawn_v2 ldr_dusk_dawn_v2;
-REGISTER_USERMOD(ldr_dusk_dawn_v2);

usermods/MAX17048_v2/library.json.disabled

@@ -1,7 +0,0 @@
-{
-  "name:": "MAX17048_v2",
-  "build": { "libArchive": false},
-  "dependencies": {
-    "Adafruit_MAX1704X":"https://github.com/adafruit/Adafruit_MAX1704X#1.0.2"
-  }
-}

usermods/MAX17048_v2/usermod_max17048.h

@@ -1,6 +1,8 @@
 // force the compiler to show a warning to confirm that this file is included
 #warning **** Included USERMOD_MAX17048 V2.0 ****
 
+#pragma once
+
 #include "wled.h"
 #include "Adafruit_MAX1704X.h"
 
@@ -277,7 +279,3 @@ const char Usermod_MAX17048::_enabled[] PROGMEM = "enabled";
 const char Usermod_MAX17048::_maxReadInterval[] PROGMEM = "max-read-interval-ms";
 const char Usermod_MAX17048::_minReadInterval[] PROGMEM = "min-read-interval-ms";
 const char Usermod_MAX17048::_HomeAssistantDiscovery[] PROGMEM = "HomeAssistantDiscovery";
-
-
-static Usermod_MAX17048 max17048_v2;
-REGISTER_USERMOD(max17048_v2);

usermods/MY9291/library.json

@@ -1,4 +0,0 @@
-{
-  "name:": "MY9291",
-  "platforms": ["espressif8266"]
-}

usermods/MY9291/usermode_MY9291.h

@@ -1,3 +1,5 @@
+#pragma once
+
 #include "wled.h"
 #include "MY92xx.h"
 
@@ -40,7 +42,4 @@ class MY9291Usermod : public Usermod {
     uint16_t getId() {
       return USERMOD_ID_MY9291;
     }
-};
-
-static MY9291Usermod my9291;
-REGISTER_USERMOD(my9291);
+};

usermods/PIR_sensor_switch/PIR_Highlight_Standby

@@ -42,7 +42,7 @@
  * 
  * 
  * Usermods allow you to add own functionality to WLED more easily
- * See: https://github.com/wled-dev/WLED/wiki/Add-own-functionality
+ * See: https://github.com/Aircoookie/WLED/wiki/Add-own-functionality
  * 
  * v2 usermods are class inheritance based and can (but don't have to) implement more functions, each of them is shown in this example.
  * Multiple v2 usermods can be added to one compilation easily.

usermods/PIR_sensor_switch/library.json

@@ -1,3 +0,0 @@
-{
-  "name:": "PIR_sensor_switch"
-}

usermods/PIR_sensor_switch/readme.md

@@ -5,7 +5,7 @@ This usermod-v2 modification allows the connection of a PIR sensor to switch on
 _Story:_
 
 I use the PIR Sensor to automatically turn on the WLED analog clock in my home office room when I am there.
-The LED strip is switched [using a relay](https://kno.wled.ge/features/relay-control/) to keep the power consumption low when it is switched off.
+The LED strip is switched [using a relay](https://github.com/Aircoookie/WLED/wiki/Control-a-relay-with-WLED) to keep the power consumption low when it is switched off.
 
 ## Web interface
 

usermods/PIR_sensor_switch/usermod_PIR_sensor_switch.h

@@ -1,3 +1,5 @@
+#pragma once
+
 #include "wled.h"
 
 #ifndef PIR_SENSOR_PIN
@@ -24,7 +26,7 @@
  * Maintained by: @blazoncek
  * 
  * Usermods allow you to add own functionality to WLED more easily
- * See: https://github.com/wled-dev/WLED/wiki/Add-own-functionality
+ * See: https://github.com/Aircoookie/WLED/wiki/Add-own-functionality
  * 
  * v2 usermods are class inheritance based and can (but don't have to) implement more functions, each of them is shown in this example.
  * Multiple v2 usermods can be added to one compilation easily.
@@ -569,7 +571,3 @@ bool PIRsensorSwitch::readFromConfig(JsonObject &root)
   // use "return !top["newestParameter"].isNull();" when updating Usermod with new features
   return !(pins.isNull() || pins.size() != PIR_SENSOR_MAX_SENSORS);
 }
-
-
-static PIRsensorSwitch pir_sensor_switch;
-REGISTER_USERMOD(pir_sensor_switch);

usermods/PWM_fan/library.json

@@ -1,6 +0,0 @@
-{
-  "name:": "PWM_fan",
-  "build": {
-    "extraScript": "setup_deps.py"
-  }
-}

usermods/PWM_fan/readme.md

@@ -11,8 +11,8 @@ If the _tachometer_ is supported, the current speed (in RPM) will be displayed o
 
 ## Installation
 
-Add the `PWM_fan` to `custom_usermods` in your `platformio.ini` (or `platformio_override.ini`)
-You will also need `Temperature` or `sht`.
+Add the compile-time option `-D USERMOD_PWM_FAN` to your `platformio.ini` (or `platformio_override.ini`) or use `#define USERMOD_PWM_FAN` in `myconfig.h`.
+You will also need `-D USERMOD_DALLASTEMPERATURE`.
 
 ### Define Your Options
 

usermods/PWM_fan/setup_deps.py

@@ -1,12 +0,0 @@
-Import('env')
-
-
-usermods = env.GetProjectOption("custom_usermods","").split()
-# Check for dependencies
-if "Temperature" in usermods:
-    env.Append(CPPDEFINES=[("USERMOD_DALLASTEMPERATURE")])
-elif "sht" in usermods:
-    env.Append(CPPDEFINES=[("USERMOD_SHT")])
-else:    
-    raise RuntimeError("PWM_fan usermod requires Temperature or sht to be enabled")
-

usermods/PWM_fan/usermod_PWM_fan.h

@@ -1,14 +1,10 @@
-#include "wled.h"
+#pragma once
 
-#if defined(USERMOD_DALLASTEMPERATURE) 
-#include "UsermodTemperature.h"
-#elif defined(USERMOD_SHT)
-#include "ShtUsermod.h"
-#else
+#if !defined(USERMOD_DALLASTEMPERATURE) && !defined(USERMOD_SHT)
 #error The "PWM fan" usermod requires "Dallas Temeprature" or "SHT" usermod to function properly.
 #endif
 
-
+#include "wled.h"
 
 // PWM & tacho code curtesy of @KlausMu
 // https://github.com/KlausMu/esp32-fan-controller/tree/main/src
@@ -401,7 +397,3 @@ const char PWMFanUsermod::_maxPWMValuePct[] PROGMEM = "max-PWM-percent";
 const char PWMFanUsermod::_IRQperRotation[] PROGMEM = "IRQs-per-rotation";
 const char PWMFanUsermod::_speed[]          PROGMEM = "speed";
 const char PWMFanUsermod::_lock[]           PROGMEM = "lock";
-
-
-static PWMFanUsermod pwm_fan;
-REGISTER_USERMOD(pwm_fan);

usermods/RTC/library.json

@@ -1,3 +0,0 @@
-{
-  "name:": "RTC"
-}

usermods/RTC/usermod_rtc.h

@@ -1,3 +1,5 @@
+#pragma once
+
 #include "src/dependencies/time/DS1307RTC.h"
 #include "wled.h"
 
@@ -46,7 +48,4 @@ class RTCUsermod : public Usermod {
     {
       return USERMOD_ID_RTC;
     }
-};
-
-static RTCUsermod rtc;
-REGISTER_USERMOD(rtc);
+};

usermods/SN_Photoresistor/library.json

@@ -1,3 +0,0 @@
-{
-  "name:": "SN_Photoresistor"
-}

usermods/SN_Photoresistor/usermod_sn_photoresistor.h

@@ -1,3 +1,5 @@
+#pragma once
+
 #include "wled.h"
 
 //Pin defaults for QuinLed Dig-Uno (A0)
@@ -208,7 +210,3 @@ const char Usermod_SN_Photoresistor::_referenceVoltage[] PROGMEM = "supplied-vol
 const char Usermod_SN_Photoresistor::_resistorValue[] PROGMEM = "resistor-value";
 const char Usermod_SN_Photoresistor::_adcPrecision[] PROGMEM = "adc-precision";
 const char Usermod_SN_Photoresistor::_offset[] PROGMEM = "offset";
-
-
-static Usermod_SN_Photoresistor sn_photoresistor;
-REGISTER_USERMOD(sn_photoresistor);

usermods/ST7789_display/README.md

@@ -27,6 +27,19 @@ This usermod enables display of the following:
 
 ### Platformio.ini changes
 
+In the `platformio.ini` file, uncomment the `TFT_eSPI` line within the [common] section, under `lib_deps`:
+
+```ini
+# platformio.ini
+...
+[common]
+...
+lib_deps =
+    ...
+  #For use of the TTGO T-Display ESP32 Module with integrated TFT display uncomment the following line  
+    #TFT_eSPI
+...
+```
 
 In the `platformio.ini` file, you must change the environment setup to build for just the esp32dev platform as follows:
 

usermods/ST7789_display/ST7789_display.h

@@ -1,6 +1,8 @@
 // Credits to @mrVanboy, @gwaland and my dearest friend @westward
 // Also for @spiff72 for usermod TTGO-T-Display
 // 210217
+#pragma once
+
 #include "wled.h"
 #include <TFT_eSPI.h>
 #include <SPI.h>
@@ -408,7 +410,4 @@ class St7789DisplayUsermod : public Usermod {
 
    //More methods can be added in the future, this example will then be extended.
    //Your usermod will remain compatible as it does not need to implement all methods from the Usermod base class!
-};
-
-static name. st7789_display;
-REGISTER_USERMOD(st7789_display);
+};

usermods/ST7789_display/library.json.disabled

@@ -1,3 +0,0 @@
-{
-  "name:": "ST7789_display"
-}