substitutions:
  name: waveshare-esp32-relay
  friendly_name: Waveshare Relay Board
  area: ""

esphome:
  name: ${name}
  friendly_name: ${friendly_name}
  area: ${area}
  name_add_mac_suffix: true
  project:
    name: waveshare.esp32-s3-relay-6ch
    version: 1.0.0

esp32:
  board: esp32-s3-devkitc-1
  framework:
    type: arduino

# Enable logging
logger:

# Enable Home Assistant API
api:
  services:
    - service: play_rtttl
      variables:
        song_str: string
      then:
        - rtttl.play:
            rtttl: !lambda "return song_str;"

ota:
  - platform: esphome
    id: waveshare_esp32_s3_relay_6ch_ota

wifi:
  # Enable fallback hotspot (captive portal) in case wifi connection fails
  ap: {}

captive_portal:

web_server:
  port: 80

dashboard_import:
  package_import_url: github://ryansch/esphome-config/waveshare-esp32-s3-relay-6ch.yaml

time:
  - platform: homeassistant
    id: homeassistant_time

binary_sensor:
  - platform: status
    name: "Status"

  - platform: gpio
    name: "Boot Button"
    pin:
      number: 0
      ignore_strapping_warning: true
      mode:
        input: true
      inverted: true
    disabled_by_default: true
    on_press:
      then:
        - button.press: restart_button

text_sensor:
  - platform: version
    name: "Firmware Version"
  - platform: wifi_info
    ip_address:
      name: "IP Address"
      entity_category: diagnostic
    ssid:
      name: "Connected SSID"
      entity_category: diagnostic
    mac_address:
      name: "Mac Address"
      entity_category: diagnostic

switch:
  - platform: gpio
    pin: GPIO1
    id: relay1
    name: Relay 1
  - platform: gpio
    pin: GPIO2
    id: relay2
    name: Relay 2
  - platform: gpio
    pin: GPIO41
    id: relay3
    name: Relay 3
  - platform: gpio
    pin: GPIO42
    id: relay4
    name: Relay 4
  - platform: gpio
    pin:
      number: GPIO45
      ignore_strapping_warning: true
    id: relay5
    name: Relay 5
  - platform: gpio
    pin:
      number: GPIO46
      ignore_strapping_warning: true
    id: relay6
    name: Relay 6

uart:
  tx_pin: GPIO17
  rx_pin: GPIO18
  baud_rate: 115200

# buzzer
output:
  - platform: ledc
    pin: GPIO21
    id: buzzer

rtttl:
  output: buzzer
  id: rtttl_buzzer
  gain: 30%

light:
  - platform: neopixelbus
    type: RGB
    variant: 800KBPS
    pin: GPIO38
    num_leds: 1
    name: "RGB LED"
    id: rgb_led

button:
  - platform: restart
    name: "Restart"
    id: restart_button
    entity_category: config

  - platform: factory_reset
    name: "Factory Reset"
    id: reset
    entity_category: config

  - platform: safe_mode
    name: "Safe Mode"
    internal: false
    entity_category: config

sensor:
  - platform: wifi_signal
    name: "WiFi Signal"
    id: wifi_signal_db
    update_interval: 60s
    entity_category: diagnostic

  # Reports the WiFi signal strength in %
  - platform: copy
    source_id: wifi_signal_db
    name: "WiFi Strength"
    filters:
      - lambda: return min(max(2 * (x + 100.0), 0.0), 100.0);
    unit_of_measurement: "%"
    entity_category: diagnostic