{
  "arduino": {
    "about": {
      "detail": "Version: {0}\nDate: {1}{2}\nCLI Version: {3}{4} [{5}]\n\n{6}",
      "label": "About {0}"
    },
    "board": {
      "board": "Board{0}",
      "boardInfo": "Board Info",
      "boardListItem": "{0} at {1}",
      "configDialog1": "Select both a Board and a Port if you want to upload a sketch.",
      "configDialog2": "If you only select a Board you will be able to compile, but not to upload your sketch.",
      "configDialogTitle": "Select Other Board & Port",
      "couldNotFindPreviouslySelected": "Could not find previously selected board '{0}' in installed platform '{1}'. Please manually reselect the board you want to use. Do you want to reselect it now?",
      "getBoardInfo": "Get Board Info",
      "inSketchbook": " (in Sketchbook)",
      "installManually": "Install Manually",
      "installNow": "The \"{0} {1}\" core has to be installed for the currently selected \"{2}\" board. Do you want to install it now?",
      "noFQBN": "The FQBN is not available for the selected board \"{0}\". Do you have the corresponding core installed?",
      "noPortsSelected": "No ports selected for board: '{0}'.",
      "noneSelected": "No boards selected.",
      "openBoardsConfig": "Select other board and port…",
      "platformMissing": "The platform for the selected '{0}' board is not installed.",
      "pleasePickBoard": "Please pick a board connected to the port you have selected.",
      "port": "Port{0}",
      "programmer": "Programmer",
      "reselectLater": "Reselect later",
      "selectBoardForInfo": "Please select a board to obtain board info.",
      "selectPortForInfo": "Please select a port to obtain board info.",
      "showAllAvailablePorts": "Shows all available ports when enabled",
      "succesfullyInstalledPlatform": "Successfully installed platform {0}:{1}",
      "succesfullyUninstalledPlatform": "Successfully uninstalled platform {0}:{1}"
    },
    "boardsManager": "Boards Manager",
    "bootloader": {
      "burnBootloader": "Burn Bootloader",
      "doneBurningBootloader": "Done burning bootloader."
    },
    "burnBootloader": {
      "error": "Error while burning the bootloader: {0}"
    },
    "certificate": {
      "addNew": "Add New",
      "addURL": "Add URL to fetch SSL certificate",
      "boardAtPort": "{0} at {1}",
      "certificatesUploaded": "Certificates uploaded.",
      "enterURL": "Enter URL",
      "noSupportedBoardConnected": "No supported board connected",
      "openContext": "Open context",
      "remove": "Remove",
      "selectBoard": "Select a board...",
      "selectCertificateToUpload": "1. Select certificate to upload",
      "selectDestinationBoardToUpload": "2. Select destination board and upload certificate",
      "upload": "Upload",
      "uploadFailed": "Upload failed. Please try again.",
      "uploadRootCertificates": "Upload SSL Root Certificates",
      "uploadingCertificates": "Uploading certificates."
    },
    "cloud": {
      "chooseSketchVisibility": "Choose visibility of your Sketch:",
      "cloudSketchbook": "Cloud Sketchbook",
      "connected": "Connected",
      "continue": "Continue",
      "donePulling": "Done pulling ‘{0}’.",
      "donePushing": "Done pushing ‘{0}’.",
      "embed": "Embed:",
      "emptySketchbook": "Your Sketchbook is empty",
      "learnMore": "Learn more",
      "link": "Link:",
      "notYetPulled": "Cannot push to Cloud. It is not yet pulled.",
      "offline": "Offline",
      "openInCloudEditor": "Open in Cloud Editor",
      "options": "Options...",
      "privateVisibility": "Private. Only you can view the Sketch.",
      "profilePicture": "Profile picture",
      "publicVisibility": "Public. Anyone with the link can view the Sketch.",
      "pull": "Pull",
      "pullFirst": "You have to pull first to be able to push to the Cloud.",
      "pullSketch": "Pull Sketch",
      "pullSketchMsg": "Pulling this Sketch from the Cloud will overwrite its local version. Are you sure you want to continue?",
      "push": "Push",
      "pushSketch": "Push Sketch",
      "pushSketchMsg": "This is a Public Sketch. Before pushing, make sure any sensitive information is defined in arduino_secrets.h files. You can make a Sketch private from the Share panel.",
      "remote": "Remote",
      "share": "Share...",
      "shareSketch": "Share Sketch",
      "showHideRemoveSketchbook": "Show/Hide Remote Sketchbook",
      "signIn": "SIGN IN",
      "signInToCloud": "Sign in to Arduino Cloud",
      "signOut": "Sign Out",
      "syncEditSketches": "Sync and edit your Arduino Cloud Sketches",
      "visitArduinoCloud": "Visit Arduino Cloud to create Cloud Sketches."
    },
    "common": {
      "later": "나중에",
      "noBoardSelected": "선택된 보드 없음",
      "notConnected": "[연결되지 않음]",
      "offlineIndicator": "오프라인 상태인 것 같습니다. 인터넷 연결이 없으면 Arduino CLI가 필요한 리소스를 다운로드하지 못하고 오작동을 일으킬 수 있습니다. 인터넷에 연결하고 애플리케이션을 다시 시작해주세요.",
      "oldFormat": "'{0}' 파일은 오래된 `.pde` 확장자로 되어있어요. 새로운 `.ino` 확장자로 변경하시겠어요?",
      "processing": "처리 중",
      "selectBoard": "보드 선택",
      "selectedOn": "{0} 켜기",
      "serialMonitor": "시리얼 모니터",
      "unknown": "알 수 없음"
    },
    "compile": {
      "error": "Compilation error: {0}"
    },
    "component": {
      "by": "by",
      "filterSearch": "Filter your search...",
      "install": "INSTALL",
      "moreInfo": "More info",
      "uninstall": "Uninstall",
      "uninstallMsg": "Do you want to uninstall {0}?",
      "version": "Version {0}"
    },
    "contributions": {
      "addFile": "Add File",
      "fileAdded": "One file added to the sketch.",
      "replaceTitle": "Replace"
    },
    "debug": {
      "debugWithMessage": "디버그 - {0}",
      "debuggingNotSupported": "Debugging is not supported by '{0}'",
      "noPlatformInstalledFor": "'{0}'에 대한 플랫폼이 설치되어 있지 않습니다",
      "optimizeForDebugging": "Optimize for Debugging"
    },
    "dialog": {
      "dontAskAgain": "Don't ask again"
    },
    "editor": {
      "autoFormat": "Auto Format",
      "commentUncomment": "Comment/Uncomment",
      "copyForForum": "Copy for Forum (Markdown)",
      "decreaseFontSize": "Decrease Font Size",
      "decreaseIndent": "Decrease Indent",
      "increaseFontSize": "Increase Font Size",
      "increaseIndent": "Increase Indent"
    },
    "electron": {
      "couldNotSave": "Could not save the sketch. Please copy your unsaved work into your favorite text editor, and restart the IDE.",
      "unsavedChanges": "Any unsaved changes will not be saved."
    },
    "examples": {
      "builtInExamples": "Built-in examples",
      "couldNotInitializeExamples": "Could not initialize built-in examples.",
      "customLibrary": "Examples from Custom Libraries",
      "for": "Examples for {0}",
      "forAny": "Examples for any board",
      "menu": "Examples"
    },
    "firmware": {
      "checkUpdates": "Check Updates",
      "failedInstall": "Installation failed. Please try again.",
      "install": "Install",
      "installingFirmware": "Installing firmware.",
      "overwriteSketch": "Installation will overwrite the Sketch on the board.",
      "selectBoard": "보드 선택",
      "selectVersion": "Select firmware version",
      "successfullyInstalled": "Firmware successfully installed.",
      "updater": "WiFi101 / WiFiNINA Firmware Updater"
    },
    "help": {
      "environment": "Environment",
      "faq": "Frequently Asked Questions",
      "findInReference": "Find in Reference",
      "gettingStarted": "Getting Started",
      "keyword": "Type a keyword",
      "privacyPolicy": "Privacy Policy",
      "reference": "Reference",
      "search": "Search on Arduino.cc",
      "troubleshooting": "Troubleshooting",
      "visit": "Visit Arduino.cc"
    },
    "ide-updater": {
      "closeAndInstallButton": "닫고 설치하기",
      "closeToInstallNotice": "소프트웨어를 닫고 장치에 업데이트를 설치해주세요.",
      "downloadButton": "다운로드",
      "downloadingNotice": "최신 버전의 Arduino IDE를 다운로드하고 있습니다.",
      "errorCheckingForUpdates": "Arduino IDE의 업데이트를 확인하던 중에 오류가 발생했어요.\n{0}",
      "goToDownloadButton": "다운로드하러 가기",
      "goToDownloadPage": "Ardunio IDE에 대한 업데이트가 있지만 자동으로 다운로드하고 설치할 수 없습니다. 다운로드 페이지에서 최신 버전을 다운로드 해주세요.",
      "ideUpdaterDialog": "소프트웨어 업데이트",
      "newVersionAvailable": "새로운 버전의 Arduino IDE ({0})를 다운로드할 수 있습니다.",
      "noUpdatesAvailable": "현재 Ardunio IDE는 최신 버전입니다",
      "notNowButton": "나중에",
      "skipVersionButton": "이 버전 건너뛰기",
      "updateAvailable": "업데이트 사용 가능",
      "versionDownloaded": "Arduino IDE {0} 버전이 다운로드 되었습니다. "
    },
    "library": {
      "addZip": "Add .ZIP Library...",
      "arduinoLibraries": "Arduino libraries",
      "contributedLibraries": "Contributed libraries",
      "dependenciesForLibrary": "Dependencies for library {0}:{1}",
      "include": "Include Library",
      "installAll": "Install all",
      "installMissingDependencies": "Would you like to install all the missing dependencies?",
      "installOneMissingDependency": "Would you like to install the missing dependency?",
      "installOnly": "Install {0} only",
      "installedSuccessfully": "Successfully installed library {0}:{1}",
      "libraryAlreadyExists": "A library already exists. Do you want to overwrite it?",
      "manageLibraries": "Manage Libraries...",
      "namedLibraryAlreadyExists": "A library folder named {0} already exists. Do you want to overwrite it?",
      "needsMultipleDependencies": "The library <b>{0}:{1}</b> needs some other dependencies currently not installed:",
      "needsOneDependency": "The library <b>{0}:{1}</b> needs another dependency currently not installed:",
      "overwriteExistingLibrary": "Do you want to overwrite the existing library?",
      "successfullyInstalledZipLibrary": "Successfully installed library from {0} archive",
      "title": "Library Manager",
      "uninstalledSuccessfully": "Successfully uninstalled library {0}:{1}",
      "zipLibrary": "Library"
    },
    "menu": {
      "sketch": "스케치",
      "tools": "도구"
    },
    "preferences": {
      "additionalManagerURLs": "Additional Boards Manager URLs",
      "auth.audience": "The OAuth2 audience.",
      "auth.clientID": "The OAuth2 client ID.",
      "auth.domain": "The OAuth2 domain.",
      "auth.registerUri": "The URI used to register a new user.",
      "automatic": "Automatic",
      "board.certificates": "List of certificates that can be uploaded to boards",
      "browse": "Browse",
      "choose": "Choose",
      "cloud.enabled": "True if the sketch sync functions are enabled. Defaults to true.",
      "cloud.pull.warn": "True if users should be warned before pulling a cloud sketch. Defaults to true.",
      "cloud.push.warn": "True if users should be warned before pushing a cloud sketch. Defaults to true.",
      "cloud.pushpublic.warn": "True if users should be warned before pushing a public sketch to the cloud. Defaults to true.",
      "cloud.sketchSyncEnpoint": "The endpoint used to push and pull sketches from a backend. By default it points to Arduino Cloud API.",
      "compile": "compile",
      "compile.verbose": "True for verbose compile output. False by default",
      "compile.warnings": "gcc에 사용할 경고 수준을 알려줍니다. 기본값은 '없음'입니다.",
      "compilerWarnings": "Compiler warnings",
      "editorFontSize": "Editor font size",
      "editorQuickSuggestions": "Editor Quick Suggestions",
      "enterAdditionalURLs": "Enter additional URLs, one for each row",
      "files.inside.sketches": "Show files inside Sketches",
      "ide.updateBaseUrl": "The base URL where to download updates from. Defaults to 'https://downloads.arduino.cc/arduino-ide'",
      "ide.updateChannel": "Release channel to get updated from. 'stable' is the stable release, 'nightly' is the latest development build.",
      "interfaceScale": "Interface scale",
      "invalid.editorFontSize": "Invalid editor font size. It must be a positive integer.",
      "invalid.sketchbook.location": "Invalid sketchbook location: {0}",
      "invalid.theme": "Invalid theme.",
      "language.log": "True if the Arduino Language Server should generate log files into the sketch folder. Otherwise, false. It's false by default.",
      "manualProxy": "Manual proxy configuration",
      "network": "Network",
      "newSketchbookLocation": "Select new sketchbook location",
      "noProxy": "No proxy",
      "showVerbose": "Show verbose output during",
      "sketchbook.location": "Sketchbook location",
      "sketchbook.showAllFiles": "True to show all sketch files inside the sketch. It is false by default.",
      "unofficialBoardSupport": "Click for a list of unofficial board support URLs",
      "upload": "upload",
      "upload.verbose": "True for verbose upload output. False by default.",
      "verifyAfterUpload": "Verify code after upload",
      "window.autoScale": "True if the user interface automatically scales with the font size.",
      "window.zoomLevel": "Adjust the zoom level of the window. The original size is 0 and each increment above (e.g. 1) or below (e.g. -1) represents zooming 20% larger or smaller. You can also enter decimals to adjust the zoom level with a finer granularity."
    },
    "replaceMsg": "Replace the existing version of {0}?",
    "selectZip": "Select a zip file containing the library you'd like to add",
    "serial": {
      "autoscroll": "Autoscroll",
      "carriageReturn": "Carriage Return",
      "connectionBusy": "Connection failed. Serial port is busy: {0}",
      "disconnected": "Disconnected {0} from {1}.",
      "failedReconnect": "Failed to reconnect {0} to serial port after 10 consecutive attempts. The {1} serial port is busy.",
      "message": "Message ({0} + Enter to send message to '{1}' on '{2}')",
      "newLine": "New Line",
      "newLineCarriageReturn": "Both NL & CR",
      "noLineEndings": "No Line Ending",
      "notConnected": "Not connected. Select a board and a port to connect automatically.",
      "reconnect": "Reconnecting {0} to {1} in {2} seconds...",
      "timestamp": "Timestamp",
      "toggleTimestamp": "Toggle Timestamp",
      "unexpectedError": "Unexpected error. Reconnecting {0} on port {1}."
    },
    "sketch": {
      "archiveSketch": "Archive Sketch",
      "cantOpen": "A folder named \"{0}\" already exists. Can't open sketch.",
      "close": "Are you sure you want to close the sketch?",
      "configureAndUpload": "Configure And Upload",
      "couldNotConnectToSerial": "Could not reconnect to serial port. {0}",
      "createdArchive": "Created archive '{0}'.",
      "doneCompiling": "Done compiling.",
      "doneUploading": "Done uploading.",
      "exportBinary": "Export Compiled Binary",
      "moving": "Moving",
      "movingMsg": "The file \"{0}\" needs to be inside a sketch folder named \"{1}\".\nCreate this folder, move the file, and continue?",
      "new": "New",
      "openFolder": "Open Folder",
      "openRecent": "Open Recent",
      "openSketchInNewWindow": "Open Sketch in New Window",
      "saveFolderAs": "Save sketch folder as...",
      "saveSketchAs": "Save sketch folder as...",
      "saveTempSketch": "Save your sketch to open it again later.",
      "showFolder": "Show Sketch Folder",
      "sketch": "스케치",
      "sketchbook": "Sketchbook",
      "titleLocalSketchbook": "Local Sketchbook",
      "titleSketchbook": "Sketchbook",
      "upload": "Upload",
      "uploadUsingProgrammer": "Upload Using Programmer",
      "userFieldsNotFoundError": "Can't find user fields for connected board",
      "verify": "Verify",
      "verifyOrCompile": "Verify/Compile"
    },
    "upload": {
      "error": "{0} error: {1}"
    },
    "userFields": {
      "cancel": "Cancel",
      "upload": "Upload"
    }
  },
  "cloud": {
    "GoToCloud": "GO TO CLOUD"
  },
  "theia": {
    "core": {
      "cannotConnectBackend": "Cannot connect to the backend.",
      "cannotConnectDaemon": "Cannot connect to the CLI daemon.",
      "couldNotSave": "Could not save the sketch. Please copy your unsaved work into your favorite text editor, and restart the IDE.",
      "daemonOffline": "CLI Daemon Offline",
      "offline": "Offline",
      "quitMessage": "Any unsaved changes will not be saved.",
      "quitTitle": "Are you sure you want to quit?"
    },
    "debug": {
      "start": "Start...",
      "startError": "There was an error starting the debug session, check the logs for more details.",
      "typeNotSupported": "The debug session type \"{0}\" is not supported."
    },
    "editor": {
      "unsavedTitle": "Unsaved – {0}"
    },
    "messages": {
      "collapse": "Collapse",
      "expand": "Expand"
    },
    "workspace": {
      "deleteCurrentSketch": "Do you want to delete the current sketch?",
      "fileNewName": "Name for new file",
      "invalidExtension": ".{0} is not a valid extension",
      "invalidFilename": "Invalid filename.",
      "newFileName": "New name for file",
      "sketchDirectoryError": "There was an error creating the sketch directory. See the log for more details. The application will probably not work as expected."
    }
  }
}