{ "arduino": { "about": { "detail": "Version: {0}\nDate: {1}{2}\nCLI Version: {3}{4} [{5}]\n\n{6}", "label": "About {0}" }, "board": { "board": "Board{0}", "boardInfo": "Board Info", "configDialog1": "Select both a Board and a Port if you want to upload a sketch.", "configDialog2": "If you only select a Board you will be able to compile, but not to upload your sketch.", "configDialogTitle": "Select Other Board & Port", "couldNotFindPreviouslySelected": "Could not find previously selected board '{0}' in installed platform '{1}'. Please manually reselect the board you want to use. Do you want to reselect it now?", "disconnected": "Disconnected", "getBoardInfo": "Get Board Info", "inSketchbook": " (in Sketchbook)", "installManually": "Install Manually", "installNow": "The \"{0} {1}\" core has to be installed for the currently selected \"{2}\" board. Do you want to install it now?", "noFQBN": "The FQBN is not available for the selected board \"{0}\". Do you have the corresponding core installed?", "noPortsSelected": "No ports selected for board: '{0}'.", "noneSelected": "No boards selected.", "openBoardsConfig": "Select other board and port…", "platformMissing": "The platform for the selected '{0}' board is not installed.", "pleasePickBoard": "Please pick a board connected to the port you have selected.", "port": "Port{0}", "portLabel": "Port: {0}", "programmer": "Programmer", "reselectLater": "Reselect later", "selectBoard": "보드 선택", "selectBoardForInfo": "Please select a board to obtain board info.", "selectPortForInfo": "Please select a port to obtain board info.", "showAllAvailablePorts": "Shows all available ports when enabled", "succesfullyInstalledPlatform": "Successfully installed platform {0}:{1}", "succesfullyUninstalledPlatform": "Successfully uninstalled platform {0}:{1}" }, "boardsManager": "Boards Manager", "bootloader": { "burnBootloader": "Burn Bootloader", "doneBurningBootloader": "Done burning bootloader." }, "burnBootloader": { "error": "Error while burning the bootloader: {0}" }, "certificate": { "addNew": "Add New", "addURL": "Add URL to fetch SSL certificate", "boardAtPort": "{0} at {1}", "certificatesUploaded": "Certificates uploaded.", "enterURL": "Enter URL", "noSupportedBoardConnected": "No supported board connected", "openContext": "Open context", "remove": "Remove", "selectBoard": "Select a board...", "selectCertificateToUpload": "1. Select certificate to upload", "selectDestinationBoardToUpload": "2. Select destination board and upload certificate", "upload": "Upload", "uploadFailed": "Upload failed. Please try again.", "uploadRootCertificates": "Upload SSL Root Certificates", "uploadingCertificates": "Uploading certificates." }, "cli-error-parser": { "keyboardError": "'Keyboard' not found. Does your sketch include the line '#include '?", "mouseError": "'Mouse' not found. Does your sketch include the line '#include '?" }, "cloud": { "account": "Account", "chooseSketchVisibility": "Choose visibility of your Sketch:", "connected": "Connected", "continue": "Continue", "donePulling": "Done pulling ‘{0}’.", "donePushing": "Done pushing ‘{0}’.", "embed": "Embed:", "emptySketchbook": "Your Sketchbook is empty", "learnMore": "Learn more", "link": "Link:", "notYetPulled": "Cannot push to Cloud. It is not yet pulled.", "offline": "Offline", "openInCloudEditor": "Open in Cloud Editor", "options": "Options...", "privateVisibility": "Private. Only you can view the Sketch.", "profilePicture": "Profile picture", "publicVisibility": "Public. Anyone with the link can view the Sketch.", "pull": "Pull", "pullFirst": "You have to pull first to be able to push to the Cloud.", "pullSketch": "Pull Sketch", "pullSketchMsg": "Pulling this Sketch from the Cloud will overwrite its local version. Are you sure you want to continue?", "push": "Push", "pushSketch": "Push Sketch", "pushSketchMsg": "This is a Public Sketch. Before pushing, make sure any sensitive information is defined in arduino_secrets.h files. You can make a Sketch private from the Share panel.", "remote": "Remote", "remoteSketchbook": "Remote Sketchbook", "share": "Share...", "shareSketch": "Share Sketch", "showHideRemoveSketchbook": "Show/Hide Remote Sketchbook", "signIn": "SIGN IN", "signInToCloud": "Sign in to Arduino Cloud", "signOut": "Sign Out", "sync": "Sync", "syncEditSketches": "Sync and edit your Arduino Cloud Sketches", "visitArduinoCloud": "Visit Arduino Cloud to create Cloud Sketches." }, "common": { "later": "나중에", "noBoardSelected": "선택된 보드 없음", "notConnected": "[연결되지 않음]", "offlineIndicator": "오프라인 상태인 것 같습니다. 인터넷 연결이 없으면 Arduino CLI가 필요한 리소스를 다운로드하지 못하고 오작동을 일으킬 수 있습니다. 인터넷에 연결하고 애플리케이션을 다시 시작해주세요.", "oldFormat": "'{0}' 파일은 오래된 `.pde` 확장자로 되어있어요. 새로운 `.ino` 확장자로 변경하시겠어요?", "processing": "처리 중", "selectBoard": "보드 선택", "selectedOn": "{0} 켜기", "serialMonitor": "시리얼 모니터", "unknown": "알 수 없음" }, "compile": { "error": "Compilation error: {0}" }, "component": { "by": "by", "filterSearch": "Filter your search...", "install": "INSTALL", "moreInfo": "More info", "uninstall": "Uninstall", "uninstallMsg": "Do you want to uninstall {0}?", "version": "Version {0}" }, "contributions": { "addFile": "Add File", "fileAdded": "One file added to the sketch.", "replaceTitle": "Replace" }, "coreContribution": { "copyError": "Copy error messages" }, "daemon": { "restart": "Restart Daemon", "start": "Start Daemon", "stop": "Stop Daemon" }, "debug": { "debugWithMessage": "디버그 - {0}", "debuggingNotSupported": "Debugging is not supported by '{0}'", "noPlatformInstalledFor": "'{0}'에 대한 플랫폼이 설치되어 있지 않습니다", "optimizeForDebugging": "Optimize for Debugging" }, "dialog": { "dontAskAgain": "Don't ask again" }, "editor": { "autoFormat": "Auto Format", "commentUncomment": "Comment/Uncomment", "copyForForum": "Copy for Forum (Markdown)", "decreaseFontSize": "Decrease Font Size", "decreaseIndent": "Decrease Indent", "increaseFontSize": "Increase Font Size", "increaseIndent": "Increase Indent", "nextError": "Next Error", "previousError": "Previous Error" }, "electron": { "couldNotSave": "Could not save the sketch. Please copy your unsaved work into your favorite text editor, and restart the IDE.", "unsavedChanges": "Any unsaved changes will not be saved." }, "examples": { "builtInExamples": "Built-in examples", "couldNotInitializeExamples": "Could not initialize built-in examples.", "customLibrary": "Examples from Custom Libraries", "for": "Examples for {0}", "forAny": "Examples for any board", "menu": "Examples" }, "firmware": { "checkUpdates": "Check Updates", "failedInstall": "Installation failed. Please try again.", "install": "Install", "installingFirmware": "Installing firmware.", "overwriteSketch": "Installation will overwrite the Sketch on the board.", "selectBoard": "보드 선택", "selectVersion": "Select firmware version", "successfullyInstalled": "Firmware successfully installed.", "updater": "WiFi101 / WiFiNINA Firmware Updater" }, "help": { "environment": "Environment", "faq": "Frequently Asked Questions", "findInReference": "Find in Reference", "gettingStarted": "Getting Started", "keyword": "Type a keyword", "privacyPolicy": "Privacy Policy", "reference": "Reference", "search": "Search on Arduino.cc", "troubleshooting": "Troubleshooting", "visit": "Visit Arduino.cc" }, "ide-updater": { "checkForUpdates": "Check for Arduino IDE updates", "closeAndInstallButton": "닫고 설치하기", "closeToInstallNotice": "소프트웨어를 닫고 장치에 업데이트를 설치해주세요.", "downloadButton": "다운로드", "downloadingNotice": "최신 버전의 Arduino IDE를 다운로드하고 있습니다.", "errorCheckingForUpdates": "Arduino IDE의 업데이트를 확인하던 중에 오류가 발생했어요.\n{0}", "goToDownloadButton": "다운로드하러 가기", "goToDownloadPage": "Ardunio IDE에 대한 업데이트가 있지만 자동으로 다운로드하고 설치할 수 없습니다. 다운로드 페이지에서 최신 버전을 다운로드 해주세요.", "ideUpdaterDialog": "소프트웨어 업데이트", "newVersionAvailable": "새로운 버전의 Arduino IDE ({0})를 다운로드할 수 있습니다.", "noUpdatesAvailable": "현재 Ardunio IDE는 최신 버전입니다", "notNowButton": "나중에", "skipVersionButton": "이 버전 건너뛰기", "updateAvailable": "업데이트 사용 가능", "versionDownloaded": "Arduino IDE {0} 버전이 다운로드 되었습니다. " }, "library": { "addZip": "Add .ZIP Library...", "arduinoLibraries": "Arduino libraries", "contributedLibraries": "Contributed libraries", "dependenciesForLibrary": "Dependencies for library {0}:{1}", "include": "Include Library", "installAll": "Install all", "installMissingDependencies": "Would you like to install all the missing dependencies?", "installOneMissingDependency": "Would you like to install the missing dependency?", "installOnly": "Install {0} only", "installedSuccessfully": "Successfully installed library {0}:{1}", "libraryAlreadyExists": "A library already exists. Do you want to overwrite it?", "manageLibraries": "Manage Libraries...", "namedLibraryAlreadyExists": "A library folder named {0} already exists. Do you want to overwrite it?", "needsMultipleDependencies": "The library {0}:{1} needs some other dependencies currently not installed:", "needsOneDependency": "The library {0}:{1} needs another dependency currently not installed:", "overwriteExistingLibrary": "Do you want to overwrite the existing library?", "successfullyInstalledZipLibrary": "Successfully installed library from {0} archive", "title": "Library Manager", "uninstalledSuccessfully": "Successfully uninstalled library {0}:{1}", "zipLibrary": "Library" }, "menu": { "advanced": "Advanced", "sketch": "스케치", "tools": "도구" }, "monitor": { "unableToCloseWebSocket": "Unable to close websocket", "unableToConnectToWebSocket": "Unable to connect to websocket" }, "preferences": { "additionalManagerURLs": "Additional Boards Manager URLs", "auth.audience": "The OAuth2 audience.", "auth.clientID": "The OAuth2 client ID.", "auth.domain": "The OAuth2 domain.", "auth.registerUri": "The URI used to register a new user.", "automatic": "Automatic", "board.certificates": "List of certificates that can be uploaded to boards", "browse": "Browse", "choose": "Choose", "cli.daemonDebug": "Enable debug logging of the gRPC calls to the Arduino CLI. A restart of the IDE is needed for this setting to take effect. It's false by default.", "cloud.enabled": "True if the sketch sync functions are enabled. Defaults to true.", "cloud.pull.warn": "True if users should be warned before pulling a cloud sketch. Defaults to true.", "cloud.push.warn": "True if users should be warned before pushing a cloud sketch. Defaults to true.", "cloud.pushpublic.warn": "True if users should be warned before pushing a public sketch to the cloud. Defaults to true.", "cloud.sketchSyncEndpoint": "The endpoint used to push and pull sketches from a backend. By default it points to Arduino Cloud API.", "compile": "compile", "compile.experimental": "True if the IDE should handle multiple compiler errors. False by default", "compile.revealRange": "Adjusts how compiler errors are revealed in the editor after a failed verify/upload. Possible values: 'auto': Scroll vertically as necessary and reveal a line. 'center': Scroll vertically as necessary and reveal a line centered vertically. 'top': Scroll vertically as necessary and reveal a line close to the top of the viewport, optimized for viewing a code definition. 'centerIfOutsideViewport': Scroll vertically as necessary and reveal a line centered vertically only if it lies outside the viewport. The default value is '{0}'.", "compile.verbose": "True for verbose compile output. False by default", "compile.warnings": "gcc에 사용할 경고 수준을 알려줍니다. 기본값은 '없음'입니다.", "compilerWarnings": "Compiler warnings", "editorFontSize": "Editor font size", "editorQuickSuggestions": "Editor Quick Suggestions", "enterAdditionalURLs": "Enter additional URLs, one for each row", "files.inside.sketches": "Show files inside Sketches", "ide.updateBaseUrl": "The base URL where to download updates from. Defaults to 'https://downloads.arduino.cc/arduino-ide'", "ide.updateChannel": "Release channel to get updated from. 'stable' is the stable release, 'nightly' is the latest development build.", "interfaceScale": "Interface scale", "invalid.editorFontSize": "Invalid editor font size. It must be a positive integer.", "invalid.sketchbook.location": "Invalid sketchbook location: {0}", "invalid.theme": "Invalid theme.", "language.log": "True if the Arduino Language Server should generate log files into the sketch folder. Otherwise, false. It's false by default.", "language.realTimeDiagnostics": "If true, the language server provides real-time diagnostics when typing in the editor. It's false by default.", "manualProxy": "Manual proxy configuration", "network": "Network", "newSketchbookLocation": "Select new sketchbook location", "noProxy": "No proxy", "showVerbose": "Show verbose output during", "sketchbook.location": "Sketchbook location", "sketchbook.showAllFiles": "True to show all sketch files inside the sketch. It is false by default.", "survey.notification": "True if users should be notified if a survey is available. True by default.", "unofficialBoardSupport": "Click for a list of unofficial board support URLs", "upload": "upload", "upload.verbose": "True for verbose upload output. False by default.", "verifyAfterUpload": "Verify code after upload", "window.autoScale": "True if the user interface automatically scales with the font size.", "window.zoomLevel": "Adjust the zoom level of the window. The original size is 0 and each increment above (e.g. 1) or below (e.g. -1) represents zooming 20% larger or smaller. You can also enter decimals to adjust the zoom level with a finer granularity." }, "replaceMsg": "Replace the existing version of {0}?", "selectZip": "Select a zip file containing the library you'd like to add", "serial": { "autoscroll": "Autoscroll", "carriageReturn": "Carriage Return", "message": "Message ({0} + Enter to send message to '{1}' on '{2}')", "newLine": "New Line", "newLineCarriageReturn": "Both NL & CR", "noLineEndings": "No Line Ending", "notConnected": "Not connected. Select a board and a port to connect automatically.", "openSerialPlotter": "Serial Plotter", "timestamp": "Timestamp", "toggleTimestamp": "Toggle Timestamp" }, "sketch": { "archiveSketch": "Archive Sketch", "cantOpen": "A folder named \"{0}\" already exists. Can't open sketch.", "close": "Are you sure you want to close the sketch?", "configureAndUpload": "Configure And Upload", "createdArchive": "Created archive '{0}'.", "doneCompiling": "Done compiling.", "doneUploading": "Done uploading.", "exportBinary": "Export Compiled Binary", "moving": "Moving", "movingMsg": "The file \"{0}\" needs to be inside a sketch folder named \"{1}\".\nCreate this folder, move the file, and continue?", "new": "New", "openFolder": "Open Folder", "openRecent": "Open Recent", "openSketchInNewWindow": "Open Sketch in New Window", "saveFolderAs": "Save sketch folder as...", "saveSketchAs": "Save sketch folder as...", "saveTempSketch": "Save your sketch to open it again later.", "showFolder": "Show Sketch Folder", "sketch": "스케치", "sketchbook": "Sketchbook", "titleLocalSketchbook": "Local Sketchbook", "titleSketchbook": "Sketchbook", "upload": "Upload", "uploadUsingProgrammer": "Upload Using Programmer", "userFieldsNotFoundError": "Can't find user fields for connected board", "verify": "Verify", "verifyOrCompile": "Verify/Compile" }, "survey": { "answerSurvey": "Answer survey", "dismissSurvey": "Don't show again", "surveyMessage": "Please help us improve by answering this super short survey. We value our community and would like to get to know our supporters a little better." }, "upload": { "error": "{0} error: {1}" }, "userFields": { "cancel": "Cancel", "upload": "Upload" } }, "cloud": { "GoToCloud": "GO TO CLOUD" }, "theia": { "core": { "cannotConnectBackend": "Cannot connect to the backend.", "cannotConnectDaemon": "Cannot connect to the CLI daemon.", "couldNotSave": "Could not save the sketch. Please copy your unsaved work into your favorite text editor, and restart the IDE.", "daemonOffline": "CLI Daemon Offline", "offline": "Offline", "quitMessage": "Any unsaved changes will not be saved.", "quitTitle": "Are you sure you want to quit?" }, "debug": { "start": "Start...", "startError": "There was an error starting the debug session, check the logs for more details.", "typeNotSupported": "The debug session type \"{0}\" is not supported." }, "editor": { "unsavedTitle": "Unsaved – {0}" }, "messages": { "collapse": "Collapse", "expand": "Expand" }, "workspace": { "deleteCurrentSketch": "Do you want to delete the current sketch?", "fileNewName": "Name for new file", "invalidExtension": ".{0} is not a valid extension", "invalidFilename": "Invalid filename.", "newFileName": "New name for file" } } }