{
  "arduino": {
    "about": {
      "detail": "版本： {0}\n日期： {1}{2}\nCLI 版本： {3}\n\n{4}",
      "label": "關於 {0}"
    },
    "account": {
      "goToCloudEditor": "前往雲端編輯器",
      "goToIoTCloud": "前往物聯網雲",
      "goToProfile": "到個人資訊",
      "menuTitle": "Arduino雲"
    },
    "board": {
      "board": "{0} 開發板",
      "boardConfigDialogTitle": "選擇其他開發板和埠",
      "boardInfo": "開發板資訊",
      "boards": "開發版",
      "configDialog1": "若要上傳 Sketch 請選擇開發板及埠",
      "configDialog2": "單選擇開發板只能編譯，不能上傳",
      "couldNotFindPreviouslySelected": "已安装平台{1}中找不到您選的開發板{0}。請手動選擇。你想選擇嗎？",
      "editBoardsConfig": "Edit Board and Port...",
      "getBoardInfo": "取得開發板資訊",
      "inSketchbook": "(在 sketchbook 內)",
      "installNow": "選取的 {2} 開發板必須安裝 {0} {1} 核心程式，要現在安裝嗎？",
      "noBoardsFound": "開發板 {0} 未找到",
      "noNativeSerialPort": "無法獲得序列埠的資訊。",
      "noPortsDiscovered": "未找到連接埠",
      "nonSerialPort": "非序列埠，無法取得資訊。",
      "openBoardsConfig": "選擇其他開發板及連接埠",
      "pleasePickBoard": "請選擇已連接上的開發版",
      "port": "連接埠: {0}",
      "ports": "連接埠",
      "programmer": "燒錄器",
      "reselectLater": "請稍後再選擇",
      "revertBoardsConfig": "Use '{0}' discovered on '{1}'",
      "searchBoard": "搜尋開發板",
      "selectBoard": "選擇開發版",
      "selectPortForInfo": "請選定連接埠以便取得開發板的資訊",
      "showAllAvailablePorts": "當開啟時，顯示所有可用的埠",
      "showAllPorts": "顯示所有連接埠",
      "succesfullyInstalledPlatform": "成功安裝平台 {0}:{1}",
      "succesfullyUninstalledPlatform": "成功卸載平台 {0}:{1}",
      "typeOfPorts": "{0}連接埠",
      "unconfirmedBoard": "Unconfirmed board",
      "unknownBoard": "未知的開發版"
    },
    "boardsManager": "開發板管理員",
    "boardsType": {
      "arduinoCertified": "Arduino 認證"
    },
    "bootloader": {
      "burnBootloader": "燒錄 Bootloader",
      "burningBootloader": "正在燒錄 bootloader ...",
      "doneBurningBootloader": "Bootloader 燒錄完成"
    },
    "burnBootloader": {
      "error": "燒錄  Bootloader 時出現錯誤：{0}"
    },
    "certificate": {
      "addNew": "新增",
      "addURL": "加入 URL 以提取 SSL 憑証",
      "boardAtPort": "{0}在{1}",
      "certificatesUploaded": "憑証已上傳",
      "enterURL": "輸入網址",
      "noSupportedBoardConnected": "已接上未被支援的開發板",
      "openContext": "開啟內文",
      "remove": "移除",
      "selectBoard": "選擇開發板",
      "selectCertificateToUpload": "1. 選擇憑証上傳",
      "selectDestinationBoardToUpload": "2. 選擇開發板並上傳憑証",
      "upload": "上傳",
      "uploadFailed": "上傳失敗，請再試一次",
      "uploadRootCertificates": "上傳SSL根憑証",
      "uploadingCertificates": "上傳憑証中..."
    },
    "checkForUpdates": {
      "checkForUpdates": "檢查 Arduino 更新",
      "installAll": "全部安裝",
      "noUpdates": "没有更新版。",
      "promptUpdateBoards": "部分開發板有更新檔。",
      "promptUpdateLibraries": "部分程式庫有更新檔。",
      "updatingBoards": "更新開發板中...",
      "updatingLibraries": "更新程式庫中..."
    },
    "cli-error-parser": {
      "keyboardError": "找不到 'Keyboard'，請檢查是否缺少 '#include <Keyboard.h>'。",
      "mouseError": "找不到 'Mouse'，請檢查是否缺少 '#include <Mouse.h>'。"
    },
    "cloud": {
      "chooseSketchVisibility": "選擇 sketch 的透明度：",
      "cloudSketchbook": "雲 sketchbook",
      "connected": "已連接",
      "continue": "繼續",
      "donePulling": "已完成讀取 '{0}' 。",
      "donePushing": "已完成推送 '{0}' 。",
      "embed": "嵌入：",
      "emptySketchbook": "您的 sketchbook 是空的",
      "goToCloud": "前往雲端",
      "learnMore": "了解更多",
      "link": "鏈結:",
      "notYetPulled": "無法推送到雲端。尚未被讀取。",
      "offline": "離線",
      "openInCloudEditor": "在雲編輯器中打開",
      "options": "選項...",
      "privateVisibility": "私人的。只有你可以查看 sketch。",
      "profilePicture": "頭像",
      "publicVisibility": "公開的。有連結的人都可以查看 sketch。",
      "pull": "讀取",
      "pullFirst": "須先讀取才能推送到雲。",
      "pullSketch": "讀取 sketch",
      "pullSketchMsg": "從雲端中讀取這 sketch 將會覆寫本地端的版本。確定要繼續嗎?",
      "push": "推送",
      "pushSketch": "推送 sketch",
      "pushSketchMsg": "這是公開的 sketch，在推送前，請確認所有敏感資訊已在arduino_secrets.h 內。在分享介面裏可將 sketch 改為私人。",
      "remote": "遠端",
      "share": "分享...",
      "shareSketch": "分享 sketch",
      "showHideSketchbook": "顯示／隱藏雲 sketchbook",
      "signIn": "登入",
      "signInToCloud": "登入Arduino 雲",
      "signOut": "登出",
      "sync": "同步",
      "syncEditSketches": "同步和編輯 Arduino 雲內的 sketch",
      "visitArduinoCloud": "前往Arduino 雲以新增雲 sketch。"
    },
    "cloudSketch": {
      "alreadyExists": "雲 sketch '{0}' 已存在。",
      "creating": "建立雲 sketch '{0}'...",
      "new": "新增雲 sketch",
      "notFound": "雲 sketch '{0}' 不存在, 無法拉取。",
      "pulling": "同步 sketchbook, 拉取 '{0}' ...",
      "pushing": "同步 sketchbook, 推送 '{0}' ...",
      "renaming": "重新命名雲 sketch  '{0}' 成 '{1}' ...",
      "synchronizingSketchbook": "同步 sketchbook ..."
    },
    "common": {
      "all": "全部",
      "contributed": "已貢獻",
      "installManually": "手動安裝",
      "later": "稍後",
      "noBoardSelected": "沒有選擇開發版",
      "notConnected": "[未連接]",
      "offlineIndicator": "您目前處於離線狀態，在沒有網路的情況下，Arduino命令列介面將無法下載需要的資源，並可能導致錯誤。請連接至網路並重新啟動程式。",
      "oldFormat": "'{0}'仍然使用舊的 `.pde` 格式，要切換成新版 `.ino`  嗎?",
      "partner": "合作夥伴",
      "processing": "資料處理中",
      "recommended": "推薦",
      "retired": "不再支援",
      "selectedOn": "在 {0}",
      "serialMonitor": "序列埠監控窗",
      "type": "類型",
      "unknown": "未知",
      "updateable": "可更新"
    },
    "compile": {
      "error": "編譯錯誤:{0} "
    },
    "component": {
      "boardsIncluded": "本套件內建的開發版：",
      "by": "by",
      "clickToOpen": "點擊以瀏覽器開啟：{0}",
      "filterSearch": "篩選搜尋結果...",
      "install": "安裝",
      "installLatest": "安装最新版本",
      "installVersion": "安裝 {0}",
      "installed": "{0}已安裝",
      "moreInfo": "更多資訊",
      "otherVersions": "其它版本",
      "remove": "移除",
      "title": "{0} / {1}",
      "uninstall": "卸載",
      "uninstallMsg": "你要卸載 {0}？",
      "update": "更新"
    },
    "configuration": {
      "cli": {
        "inaccessibleDirectory": "無法存取 sketchbook 內的 '{0}' :{1}"
      }
    },
    "connectionStatus": {
      "connectionLost": "失去連線，無法使用雲 sketch 或更新。"
    },
    "contributions": {
      "addFile": "加入檔案",
      "fileAdded": "一個檔案加入 Sketch",
      "plotter": {
        "couldNotOpen": "無法開啟繪圖儀。"
      },
      "replaceTitle": "取代"
    },
    "core": {
      "compilerWarnings": {
        "all": "全部",
        "default": "預設",
        "more": "更多",
        "none": "無"
      }
    },
    "coreContribution": {
      "copyError": "複製錯誤訊息",
      "noBoardSelected": "未選取開發版。請從 工具 > 開發版 中選取開發版"
    },
    "createCloudCopy": "推送 sketch 至雲端。",
    "daemon": {
      "restart": "重啟背景程式",
      "start": "重啟背景程式",
      "stop": "停止背景程式"
    },
    "debug": {
      "debugWithMessage": "除錯 - {0}",
      "debuggingNotSupported": "'{0}'不支援除錯。",
      "noPlatformInstalledFor": "平台未安裝給'{0}'",
      "optimizeForDebugging": "除錯最佳化",
      "sketchIsNotCompiled": "Sketch '{0}' 在除錯前必須已驗證過。請先驗證 sketch 後再除錯。要現在驗證 sketch 嗎？"
    },
    "developer": {
      "clearBoardList": "Clear the Board List History",
      "clearBoardsConfig": "Clear the Board and Port Selection",
      "dumpBoardList": "Dump the Board List"
    },
    "dialog": {
      "dontAskAgain": "不要再詢問"
    },
    "editor": {
      "autoFormat": "自動格式",
      "commentUncomment": "備註/撤除備註",
      "copyForForum": "複製到論壇(Markdowm)",
      "decreaseFontSize": "縮小字體",
      "decreaseIndent": "減少縮排",
      "increaseFontSize": "加大字體",
      "increaseIndent": "增加縮排",
      "nextError": "下一個錯誤",
      "previousError": "上一個錯誤",
      "revealError": "顯示錯誤"
    },
    "examples": {
      "builtInExamples": "內建範例",
      "couldNotInitializeExamples": "無法初始內建的範例",
      "customLibrary": "客製程式庫的範例",
      "for": "{0} 的範例",
      "forAny": "適用各種開發板的範例",
      "menu": "範例"
    },
    "firmware": {
      "checkUpdates": "檢查更新",
      "failedInstall": "安裝失敗，請再試一次",
      "install": "安裝",
      "installingFirmware": "安裝韌體",
      "overwriteSketch": "安裝將覆寫開發板上的 Sketch",
      "selectBoard": "選擇開發版",
      "selectVersion": "選擇韌體版本",
      "successfullyInstalled": "韌體安裝成功",
      "updater": "Firmware Updater"
    },
    "help": {
      "environment": "環境",
      "faq": "常見問題",
      "findInReference": "搜尋參考文件",
      "gettingStarted": "入門教學",
      "keyword": "輸入關鍵字",
      "privacyPolicy": "隱私政策",
      "reference": "參考文件",
      "search": "在 Arduino.cc 搜尋",
      "troubleshooting": "故障排除",
      "visit": "造訪 Arduino.cc"
    },
    "ide-updater": {
      "checkForUpdates": "檢查 Arduino IDE 更新",
      "closeAndInstallButton": "關閉並安裝。",
      "closeToInstallNotice": "關閉本程式後安裝更新。",
      "downloadButton": "下載",
      "downloadingNotice": "正在下載最新版本的Arduino IDE。",
      "errorCheckingForUpdates": "檢查Arduino IDE更新時發生錯誤。\n{0}",
      "goToDownloadButton": "前往下載",
      "goToDownloadPage": "Arduino IDE 有更新版本, 但我們無法自動下載安裝, 請至下載頁面下載最新的版本。",
      "ideUpdaterDialog": "軟體更新",
      "newVersionAvailable": "有新版本的Arduino IDE({0})可供下載。",
      "noUpdatesAvailable": "Arduino IDE 沒更新檔。",
      "notNowButton": "現在不要",
      "skipVersionButton": "略過這個版本",
      "updateAvailable": "有更新檔。",
      "versionDownloaded": "Arduino IDE{0}下載完成。"
    },
    "installable": {
      "libraryInstallFailed": "程式庫 ' {0} {1}' : 安裝失敗。",
      "platformInstallFailed": "平台安裝失敗: '{0} {1}' "
    },
    "library": {
      "addZip": "加入 .zip 程式庫 ...",
      "arduinoLibraries": "Arduino 程式庫",
      "contributedLibraries": "貢獻的程式庫",
      "include": "含括程式庫",
      "installAll": "全部安裝",
      "installLibraryDependencies": "安裝相依的程式庫",
      "installMissingDependencies": "要安裝缺少的相依程式嗎？",
      "installOneMissingDependency": "要安裝缺少的相依程式庫嗎 ?",
      "installWithoutDependencies": "不管相依性直接安裝",
      "installedSuccessfully": "成功安裝程式庫 {0}:{1} ",
      "libraryAlreadyExists": "程式庫已存在，要覆寫它嗎？",
      "manageLibraries": "管理程式庫",
      "namedLibraryAlreadyExists": "{0} 程式庫資料夾已存在，要覆寫它嗎？",
      "needsMultipleDependencies": "程式庫<b>{0}：{1}</b>需要下列未安裝的相依程式:",
      "needsOneDependency": "程式庫<b>{0}：{1}</b>需要其他未安装的相依程式：",
      "overwriteExistingLibrary": "要覆寫既有的程式庫嗎？",
      "successfullyInstalledZipLibrary": "從 {0} 成功安裝程式庫",
      "title": "程式庫管理員",
      "uninstalledSuccessfully": "成功卸載程式庫 {0}:{1}",
      "zipLibrary": "程式庫"
    },
    "librarySearchProperty": {
      "topic": "主題"
    },
    "libraryTopic": {
      "communication": "交流",
      "dataProcessing": "資料處理",
      "dataStorage": "資料儲存",
      "deviceControl": "設備管理",
      "display": "顯示",
      "other": "其它",
      "sensors": "感測器",
      "signalInputOutput": "訊號輸入/ 輸出",
      "timing": "定時",
      "uncategorized": "未分類"
    },
    "libraryType": {
      "installed": "安裝"
    },
    "menu": {
      "advanced": "進階設定",
      "sketch": "Sketch",
      "tools": "工具"
    },
    "monitor": {
      "alreadyConnectedError": "已連線，但無法連到{0} {1}埠。",
      "baudRate": "{0}鮑率",
      "connectionFailedError": "無法連接 {0} {1} 埠。",
      "connectionFailedErrorWithDetails": "{0} 無法連接 {1} {2} 埠。",
      "connectionTimeout": "逾時，IDE在連上監看視窗後未收到成功訊息。",
      "missingConfigurationError": "無法連上 {0} {1} 埠，監看視窗設定遺失。",
      "notConnectedError": "無法連上 {0} {1} 埠。",
      "unableToCloseWebSocket": "無法關閉 websocket",
      "unableToConnectToWebSocket": "無法連上 websocket"
    },
    "newCloudSketch": {
      "newSketchTitle": "新的雲端 Sketch 名稱"
    },
    "portProtocol": {
      "network": "網路",
      "serial": "序列"
    },
    "preferences": {
      "additionalManagerURLs": "其他開發版管理器網址",
      "auth.audience": "OAuth2閱聽者",
      "auth.clientID": "OAuth2客戶端ID",
      "auth.domain": "OAuth2 網域",
      "auth.registerUri": "註冊新使用者的 URI",
      "automatic": "自動調整",
      "board.certificates": "可上傳到開發版的憑証列表",
      "browse": "瀏覽",
      "checkForUpdate": "接收 IDE、開發板和程式庫的更新通知。 更改後需要重啟 IDE。 預設:開啟。",
      "choose": "選擇",
      "cli.daemonDebug": "啟用 Arduino CLI 內 gRPC 呼叫記錄。 需要重啟 IDE 才能生效。 預設:關閉。",
      "cloud.enabled": "Sketch 同步, 預設:開啟。",
      "cloud.pull.warn": "讀取雲端 sketch 前會警告使用者。預設: 開啟。",
      "cloud.push.warn": "推送雲端 sketch 前會警告使用者。預設: 開啟。",
      "cloud.pushpublic.warn": "推送公開的 sketch 到雲端前會警告使用者。預設: 開啟。",
      "cloud.sketchSyncEndpoint": "用來從後台讀取或推送 sketch 的端點。預設: Arduino 雲 API。",
      "compile": "編譯",
      "compile.experimental": "IDE 處理多個編譯器錯誤。 預設: 關閉",
      "compile.revealRange": "調整驗證/上傳失敗後編譯器錯誤訊息如何顯示。 可能的值：'auto'：依需要垂直滾動並顯示一行。 'center'：依需要垂直滾動並顯示垂直居中的一行。 'top'：依需要垂直滾動並上方顯示一行，方便查看程式碼。 'centerIfOutsideViewport'：依需要垂直滾動，僅當它在可視區外時才顯示垂直居中的一行。 預設為 '{0}'",
      "compile.verbose": "輸出詳細編譯資訊。預設: 關閉",
      "compile.warnings": "設定gcc警告等級。預設為'None'",
      "compilerWarnings": "編譯器警告",
      "editorFontSize": "編輯器字體大小",
      "editorQuickSuggestions": "編輯器快速建議",
      "enterAdditionalURLs": "輸入其他網址，每行一個",
      "files.inside.sketches": "顯示 sketch 裏面的檔案",
      "ide.updateBaseUrl": "下載更新的網址, 預設為：'https://downloads.arduino.cc/arduino-ide'",
      "ide.updateChannel": "前往版本釋出頻道獲取更新。 'stable'表示為穩定的版本， 'nightly' 則是最新的開發版本。",
      "interfaceScale": "介面比例",
      "invalid.editorFontSize": "無效的編輯器字體大小。它必須是正整數。",
      "invalid.sketchbook.location": "無效的 sketchbook 位置:{0}",
      "invalid.theme": "無效的主題。",
      "language.log": "Arduino語言伺服器會自動在 sketch 內產生日誌檔。預設為關閉。",
      "language.realTimeDiagnostics": "語言服務器提供即時診斷。預設關閉。",
      "manualProxy": "手動設定代理伺服器",
      "monitor": {
        "dockPanel": "程式 _{0}_ 區塊位置. 不是在 \"下方\" 或 \"右側\". 預設: \"{1}\"."
      },
      "network": "網路",
      "newSketchbookLocation": "選取新的 sketchbook 位置",
      "noCliConfig": "無法載入CLI 命令列設定。",
      "noProxy": "無代理",
      "proxySettings": {
        "hostname": "主機名稱",
        "password": "密碼",
        "port": "埠號",
        "username": "使用者名稱"
      },
      "showVerbose": "顯示詳細輸出",
      "sketch": {
        "inoBlueprint": "\".ino \"藍圖文件的絕對檔案系統路徑。如有指定，藍圖文件的內容將被用在每個新增的 sketch 上。如果沒特別指定，sketch 將以內預設的Arduino內容生成。無法訪問的藍圖文件將被忽略。 **需要重啟 IDE** 本設定才會生效。"
      },
      "sketchbook.location": "sketchbook 位置",
      "sketchbook.showAllFiles": "顯示 sketch 內全部檔案。預設: false。",
      "survey.notification": "有新問卷時會通知使用者, 預設為: true。",
      "unofficialBoardSupport": "點擊來取得非官方開發版的支援網址",
      "upload": "上傳",
      "upload.verbose": "上傳時輸出的詳細資訊。預設: False",
      "verifyAfterUpload": "上傳後驗證程式碼",
      "window.autoScale": "使用者介面隨字體大小自動縮放。",
      "window.zoomLevel": {
        "deprecationMessage": "已棄用。請改用 'window.zoomLevel' 。"
      }
    },
    "renameCloudSketch": {
      "renameSketchTitle": "雲 sketch 的新名稱"
    },
    "replaceMsg": "取代現有的 {0} 版本？",
    "selectZip": "選擇內含程式庫的 zip 檔",
    "serial": {
      "autoscroll": "自動捲動",
      "carriageReturn": "內有 CR",
      "connecting": "連接到 '{1}' 上的 '{0}'  ...",
      "message": "訊息 (按 Enter 鍵將訊息發送到 {1} 上的 {0})",
      "newLine": "換行",
      "newLineCarriageReturn": "NL和CR字元",
      "noLineEndings": "沒有斷行字元",
      "notConnected": "未連上。請選擇開發板及連接埠後自動連接",
      "openSerialPlotter": "序列埠監控窗",
      "timestamp": "時間戳記",
      "toggleTimestamp": "切換時戳"
    },
    "sketch": {
      "archiveSketch": "sketch 歸檔",
      "cantOpen": "已有 \"{0}\" 資料夾, 無法開啟 sketch",
      "compile": "編譯 sketch...",
      "configureAndUpload": "設定並上傳",
      "createdArchive": "已歸檔{0}。",
      "doneCompiling": "編譯完成",
      "doneUploading": "上傳完畢",
      "editInvalidSketchFolderLocationQuestion": "想要把 sketch 儲存在不同地方嗎？",
      "editInvalidSketchFolderQuestion": "想要把 sketch 存為不同檔名嗎？",
      "exportBinary": "匯出已編譯的二進位碼",
      "invalidCloudSketchName": "命名必須以字母、數字或底線開頭，後面接字母、數字、破折號、點、底線。最長 36個字元。",
      "invalidSketchFolderLocationDetails": "不能把 sketch 儲存到它自身內部的資料夾裡。",
      "invalidSketchFolderLocationMessage": "無效的 sketch 資料夾位置： '{0}' ",
      "invalidSketchFolderNameMessage": "無效的 sketch 資料夾名稱： '{0}' ",
      "invalidSketchName": "命名必須以字母、數字或底線為開頭，後面跟著字母、數字、破折號、點、底線。最長 63 字元。",
      "moving": "移動",
      "movingMsg": "檔案{0}需放在sketch 資料夾的{1}內 ,\n要建立資料夾並移動檔案嗎？",
      "new": "新增 sketch",
      "noTrailingPeriod": "檔名不能以逗號字元結尾",
      "openFolder": "打開資料夾",
      "openRecent": "開啟最近的",
      "openSketchInNewWindow": "在新視窗開啟 sketch",
      "reservedFilename": "'{0}' 為保留檔名。",
      "saveFolderAs": "另存 Sketch 資料夾為",
      "saveSketch": "儲存 sketch 以便下次再打開它。",
      "saveSketchAs": "另存 Sketch 資料夾為",
      "showFolder": "顯示 Sketch 資料夾",
      "sketch": "Sketch",
      "sketchbook": "Sketchbook",
      "titleLocalSketchbook": "本地端的 Sketchbook",
      "titleSketchbook": "Sketchbook",
      "upload": "上傳",
      "uploadUsingProgrammer": "使用燒錄器上傳",
      "uploading": "上傳...",
      "userFieldsNotFoundError": "找不到已連接開發版中的用戶欄",
      "verify": "驗證",
      "verifyOrCompile": "驗證/編譯"
    },
    "sketchbook": {
      "newCloudSketch": "新增雲 sketch",
      "newSketch": "新增 sketch"
    },
    "survey": {
      "answerSurvey": "填寫問卷",
      "dismissSurvey": "不要再顯示",
      "surveyMessage": "請回答超短的問卷來協助我們改善。 我們重視本社群, 希望能更了解我們的支持者。 "
    },
    "theme": {
      "currentThemeNotFound": "找不到目前選擇的主題：{0} 。 Arduino IDE 挑選了一個內建的相容主題。",
      "dark": "暗",
      "deprecated": "{0} （已棄用）",
      "hc": "深色高對比",
      "hcLight": "亮色高對比",
      "light": "亮",
      "user": "{0} （使用者）"
    },
    "title": {
      "cloud": "雲端"
    },
    "updateIndexes": {
      "updateIndexes": "更新索引",
      "updateLibraryIndex": "更新程式庫索引",
      "updatePackageIndex": "更新套件索引"
    },
    "upload": {
      "error": "{0} 錯誤：{1}"
    },
    "userFields": {
      "cancel": "取消",
      "enterField": "輸入 {0}",
      "upload": "上傳"
    },
    "validateSketch": {
      "abortFixMessage": "Sketch 仍是無效的。你想修復這問題嗎？點擊 '{0}' ，會開啟新的 Sketch 。",
      "abortFixTitle": "無效的 sketch",
      "renameSketchFileMessage": "Sketch '{0}' 無法被使用。 {1} 想立即更改 sketch 的檔名嗎？",
      "renameSketchFileTitle": "無效的 sketch 檔名",
      "renameSketchFolderMessage": "Sketch '{0}' 無法被使用。 {1} 要擺脫這則訊息，請更改 sketch 檔名。要現在更改檔名嗎？",
      "renameSketchFolderTitle": "無效的 sketch 檔名"
    },
    "workspace": {
      "alreadyExists": "'{0}'已存在。"
    }
  },
  "theia": {
    "core": {
      "cannotConnectBackend": "無法連上後端",
      "cannotConnectDaemon": "無法連上命令列 CLI 背景程式",
      "couldNotSave": "無法儲存 sketch，請複製未存檔的成果到你偏好的文字編輯器中, 再重啟 IDE",
      "daemonOffline": "CLI 命令列背景程式離線",
      "offline": "離線",
      "offlineText": "離線",
      "quitTitle": "確定要退出嗎？"
    },
    "editor": {
      "unsavedTitle": "{0} – 尚未儲存"
    },
    "messages": {
      "collapse": "收折",
      "expand": "展開"
    },
    "workspace": {
      "deleteCloudSketch": "雲 sketch  '{0}' 將從Arduino 伺服器和本機暫存中永久刪除。這個動作是不可逆的。確定要刪除 Sketch 嗎？",
      "deleteCurrentSketch": "sketch '{0}' 將被永久刪除。這個動作是不可逆的。確定要刪除 sketch 嗎？",
      "fileNewName": "新檔案名稱",
      "invalidExtension": ".{0} 不是合法的副檔名",
      "newFileName": "新檔案名稱"
    }
  }
}