[ci skip] Translation update

homeassistant/components/airthings/translations/id.json

@@ -0,0 +1,12 @@
+{
+    "config": {
+        "abort": {
+            "already_configured": "Akun sudah dikonfigurasi"
+        },
+        "error": {
+            "cannot_connect": "Gagal terhubung",
+            "invalid_auth": "Autentikasi tidak valid",
+            "unknown": "Kesalahan yang tidak diharapkan"
+        }
+    }
+}

homeassistant/components/aurora_abb_powerone/translations/id.json

@@ -0,0 +1,10 @@
+{
+    "config": {
+        "abort": {
+            "already_configured": "Perangkat sudah dikonfigurasi"
+        },
+        "error": {
+            "unknown": "Kesalahan yang tidak diharapkan"
+        }
+    }
+}

homeassistant/components/binary_sensor/translations/hu.json

@@ -132,7 +132,7 @@
             "on": "Hideg"
         },
         "connectivity": {
-            "off": "Lekapcsol\u00f3dva",
+            "off": "Lev\u00e1lasztva",
             "on": "Kapcsol\u00f3dva"
         },
         "door": {

homeassistant/components/binary_sensor/translations/id.json

@@ -17,6 +17,7 @@
             "is_no_problem": "{entity_name} tidak mendeteksi masalah",
             "is_no_smoke": "{entity_name} tidak mendeteksi asap",
             "is_no_sound": "{entity_name} tidak mendeteksi suara",
+            "is_no_update": "{entity_name} sudah yang terbaru",
             "is_no_vibration": "{entity_name} tidak mendeteksi getaran",
             "is_not_bat_low": "Baterai {entity_name} normal",
             "is_not_cold": "{entity_name} tidak dingin",
@@ -30,6 +31,8 @@
             "is_not_plugged_in": "{entity_name} dicabut",
             "is_not_powered": "{entity_name} tidak ditenagai",
             "is_not_present": "{entity_name} tidak ada",
+            "is_not_running": "{entity_name} tidak berjalan",
+            "is_not_tampered": "{entity_name} tidak mendeteksi gangguan",
             "is_not_unsafe": "{entity_name} aman",
             "is_occupied": "{entity_name} ditempati",
             "is_off": "{entity_name} mati",
@@ -39,9 +42,12 @@
             "is_powered": "{entity_name} ditenagai",
             "is_present": "{entity_name} ada",
             "is_problem": "{entity_name} mendeteksi masalah",
+            "is_running": "{entity_name} sedang berjalan",
             "is_smoke": "{entity_name} mendeteksi asap",
             "is_sound": "{entity_name} mendeteksi suara",
+            "is_tampered": "{entity_name} mendeteksi gangguan",
             "is_unsafe": "{entity_name} tidak aman",
+            "is_update": "{entity_name} memiliki pembaruan yang tersedia",
             "is_vibration": "{entity_name} mendeteksi getaran"
         },
         "trigger_type": {
@@ -50,6 +56,8 @@
             "connected": "{entity_name} terhubung",
             "gas": "{entity_name} mulai mendeteksi gas",
             "hot": "{entity_name} menjadi panas",
+            "is_not_tampered": "{entity_name} berhenti mendeteksi gangguan",
+            "is_tampered": "{entity_name} mulai mendeteksi gangguan",
             "light": "{entity_name} mulai mendeteksi cahaya",
             "locked": "{entity_name} terkunci",
             "moist": "{entity_name} menjadi lembab",
@@ -61,6 +69,7 @@
             "no_problem": "{entity_name} berhenti mendeteksi masalah",
             "no_smoke": "{entity_name} berhenti mendeteksi asap",
             "no_sound": "{entity_name} berhenti mendeteksi suara",
+            "no_update": "{entity_name} menjadi yang terbaru",
             "no_vibration": "{entity_name} berhenti mendeteksi getaran",
             "not_bat_low": "Baterai {entity_name} normal",
             "not_cold": "{entity_name} menjadi tidak dingin",
@@ -74,6 +83,7 @@
             "not_plugged_in": "{entity_name} dicabut",
             "not_powered": "{entity_name} tidak ditenagai",
             "not_present": "{entity_name} tidak ada",
+            "not_running": "{entity_name} tidak lagi berjalan",
             "not_unsafe": "{entity_name} menjadi aman",
             "occupied": "{entity_name} menjadi ditempati",
             "opened": "{entity_name} terbuka",
@@ -81,14 +91,29 @@
             "powered": "{entity_name} ditenagai",
             "present": "{entity_name} ada",
             "problem": "{entity_name} mulai mendeteksi masalah",
+            "running": "{entity_name} mulai berjalan",
             "smoke": "{entity_name} mulai mendeteksi asap",
             "sound": "{entity_name} mulai mendeteksi suara",
             "turned_off": "{entity_name} dimatikan",
             "turned_on": "{entity_name} dinyalakan",
             "unsafe": "{entity_name} menjadi tidak aman",
+            "update": "{entity_name} mendapat pembaruan yang tersedia",
             "vibration": "{entity_name} mulai mendeteksi getaran"
         }
     },
+    "device_class": {
+        "cold": "dingin",
+        "gas": "gas",
+        "heat": "panas",
+        "moisture": "kelembaban",
+        "motion": "gerakan",
+        "occupancy": "okupansi",
+        "power": "daya",
+        "problem": "masalah",
+        "smoke": "asap",
+        "sound": "suara",
+        "vibration": "vibrasi"
+    },
     "state": {
         "_": {
             "off": "Mati",
@@ -166,6 +191,10 @@
             "off": "Oke",
             "on": "Bermasalah"
         },
+        "running": {
+            "off": "Tidak berjalan",
+            "on": "Berjalan"
+        },
         "safety": {
             "off": "Aman",
             "on": "Tidak aman"
@@ -179,6 +208,7 @@
             "on": "Terdeteksi"
         },
         "update": {
+            "off": "Diperbarui",
             "on": "Pembaruan tersedia"
         },
         "vibration": {

homeassistant/components/crownstone/translations/fr.json

@@ -0,0 +1,21 @@
+{
+    "options": {
+        "step": {
+            "usb_config": {
+                "data": {
+                    "usb_path": "Chemin du p\u00e9riph\u00e9rique USB"
+                }
+            },
+            "usb_config_option": {
+                "data": {
+                    "usb_path": "Chemin du p\u00e9riph\u00e9rique USB"
+                }
+            },
+            "usb_manual_config": {
+                "data": {
+                    "usb_manual_path": "Chemin du p\u00e9riph\u00e9rique USB"
+                }
+            }
+        }
+    }
+}

homeassistant/components/crownstone/translations/id.json

@@ -28,6 +28,21 @@
     },
     "options": {
         "step": {
+            "usb_config": {
+                "data": {
+                    "usb_path": "Jalur Perangkat USB"
+                }
+            },
+            "usb_config_option": {
+                "data": {
+                    "usb_path": "Jalur Perangkat USB"
+                }
+            },
+            "usb_manual_config": {
+                "data": {
+                    "usb_manual_path": "Jalur Perangkat USB"
+                }
+            },
             "usb_manual_config_option": {
                 "data": {
                     "usb_manual_path": "Jalur Perangkat USB"

homeassistant/components/devolo_home_network/translations/fr.json

@@ -0,0 +1,19 @@
+{
+    "config": {
+        "abort": {
+            "already_configured": "L'appareil est d\u00e9j\u00e0 configur\u00e9"
+        },
+        "error": {
+            "cannot_connect": "\u00c9chec de connexion",
+            "unknown": "Erreur inattendue"
+        },
+        "step": {
+            "user": {
+                "data": {
+                    "ip_address": "Adresse IP"
+                },
+                "description": "Voulez-vous commencer la configuration ?"
+            }
+        }
+    }
+}

homeassistant/components/devolo_home_network/translations/id.json

@@ -0,0 +1,19 @@
+{
+    "config": {
+        "abort": {
+            "already_configured": "Perangkat sudah dikonfigurasi"
+        },
+        "error": {
+            "cannot_connect": "Gagal terhubung",
+            "unknown": "Kesalahan yang tidak diharapkan"
+        },
+        "step": {
+            "user": {
+                "data": {
+                    "ip_address": "Alamat IP"
+                },
+                "description": "Ingin memulai penyiapan?"
+            }
+        }
+    }
+}

homeassistant/components/dlna_dmr/translations/fr.json

@@ -0,0 +1,26 @@
+{
+    "config": {
+        "abort": {
+            "already_configured": "L'appareil est d\u00e9j\u00e0 configur\u00e9"
+        },
+        "error": {
+            "cannot_connect": "\u00c9chec de connexion"
+        },
+        "step": {
+            "confirm": {
+                "description": "Voulez-vous commencer la configuration ?"
+            },
+            "manual": {
+                "data": {
+                    "url": "URL"
+                }
+            },
+            "user": {
+                "data": {
+                    "host": "H\u00f4te",
+                    "url": "URL"
+                }
+            }
+        }
+    }
+}

homeassistant/components/dlna_dmr/translations/id.json

@@ -0,0 +1,24 @@
+{
+    "config": {
+        "error": {
+            "cannot_connect": "Gagal terhubung"
+        },
+        "flow_title": "{name}",
+        "step": {
+            "confirm": {
+                "description": "Ingin memulai penyiapan?"
+            },
+            "manual": {
+                "data": {
+                    "url": "URL"
+                }
+            },
+            "user": {
+                "data": {
+                    "host": "Host",
+                    "url": "URL"
+                }
+            }
+        }
+    }
+}

homeassistant/components/efergy/translations/fr.json

@@ -0,0 +1,12 @@
+{
+    "config": {
+        "abort": {
+            "already_configured": "L'appareil est d\u00e9j\u00e0 configur\u00e9"
+        },
+        "error": {
+            "cannot_connect": "\u00c9chec de connexion",
+            "invalid_auth": "Authentification invalide",
+            "unknown": "Erreur inattendue"
+        }
+    }
+}

homeassistant/components/environment_canada/translations/fr.json

@@ -0,0 +1,16 @@
+{
+    "config": {
+        "error": {
+            "cannot_connect": "\u00c9chec de connexion",
+            "unknown": "Erreur inattendue"
+        },
+        "step": {
+            "user": {
+                "data": {
+                    "latitude": "Latitude",
+                    "longitude": "Longitude"
+                }
+            }
+        }
+    }
+}

homeassistant/components/environment_canada/translations/id.json

@@ -0,0 +1,18 @@
+{
+    "config": {
+        "error": {
+            "cannot_connect": "Gagal terhubung",
+            "unknown": "Kesalahan yang tidak diharapkan"
+        },
+        "step": {
+            "user": {
+                "data": {
+                    "language": "Bahasa informasi cuaca",
+                    "latitude": "Lintang",
+                    "longitude": "Bujur",
+                    "station": "ID stasiun cuaca"
+                }
+            }
+        }
+    }
+}

homeassistant/components/esphome/translations/id.json

@@ -22,6 +22,11 @@
                 "description": "Ingin menambahkan node ESPHome `{name}` ke Home Assistant?",
                 "title": "Perangkat node ESPHome yang ditemukan"
             },
+            "encryption_key": {
+                "data": {
+                    "noise_psk": "Kunci enkripsi"
+                }
+            },
             "user": {
                 "data": {
                     "host": "Host",

homeassistant/components/evil_genius_labs/translations/fr.json

@@ -0,0 +1,15 @@
+{
+    "config": {
+        "error": {
+            "cannot_connect": "\u00c9chec de connexion",
+            "unknown": "Erreur inattendue"
+        },
+        "step": {
+            "user": {
+                "data": {
+                    "host": "H\u00f4te"
+                }
+            }
+        }
+    }
+}

homeassistant/components/evil_genius_labs/translations/id.json

@@ -0,0 +1,14 @@
+{
+    "config": {
+        "error": {
+            "unknown": "Kesalahan yang tidak diharapkan"
+        },
+        "step": {
+            "user": {
+                "data": {
+                    "host": "Host"
+                }
+            }
+        }
+    }
+}

homeassistant/components/iotawatt/translations/fr.json

@@ -0,0 +1,11 @@
+{
+    "config": {
+        "step": {
+            "user": {
+                "data": {
+                    "host": "H\u00f4te"
+                }
+            }
+        }
+    }
+}

homeassistant/components/iotawatt/translations/id.json

@@ -11,6 +11,11 @@
                     "password": "Kata Sandi",
                     "username": "Nama Pengguna"
                 }
+            },
+            "user": {
+                "data": {
+                    "host": "Host"
+                }
             }
         }
     }

homeassistant/components/jellyfin/translations/fr.json

@@ -0,0 +1,21 @@
+{
+    "config": {
+        "abort": {
+            "single_instance_allowed": "D\u00e9j\u00e0 configur\u00e9. Une seule configuration possible."
+        },
+        "error": {
+            "cannot_connect": "\u00c9chec de connexion",
+            "invalid_auth": "Authentification invalide",
+            "unknown": "Erreur inattendue"
+        },
+        "step": {
+            "user": {
+                "data": {
+                    "password": "Mot de passe",
+                    "url": "URL",
+                    "username": "Nom d'utilisateur"
+                }
+            }
+        }
+    }
+}

homeassistant/components/jellyfin/translations/id.json

@@ -0,0 +1,21 @@
+{
+    "config": {
+        "abort": {
+            "single_instance_allowed": "Sudah dikonfigurasi. Hanya satu konfigurasi yang diizinkan."
+        },
+        "error": {
+            "cannot_connect": "Gagal terhubung",
+            "invalid_auth": "Autentikasi tidak valid",
+            "unknown": "Kesalahan yang tidak diharapkan"
+        },
+        "step": {
+            "user": {
+                "data": {
+                    "password": "Kata Sandi",
+                    "url": "URL",
+                    "username": "Nama Pengguna"
+                }
+            }
+        }
+    }
+}

homeassistant/components/jellyfin/translations/nl.json

@@ -0,0 +1,21 @@
+{
+    "config": {
+        "abort": {
+            "single_instance_allowed": "Al geconfigureerd. Slechts een enkele configuratie mogelijk."
+        },
+        "error": {
+            "cannot_connect": "Kan geen verbinding maken",
+            "invalid_auth": "Ongeldige authenticatie",
+            "unknown": "Onverwachte fout"
+        },
+        "step": {
+            "user": {
+                "data": {
+                    "password": "Wachtwoord",
+                    "url": "URL",
+                    "username": "Gebruikersnaam"
+                }
+            }
+        }
+    }
+}

homeassistant/components/jellyfin/translations/no.json

@@ -0,0 +1,21 @@
+{
+    "config": {
+        "abort": {
+            "single_instance_allowed": "Allerede konfigurert. Bare \u00e9n enkelt konfigurasjon er mulig."
+        },
+        "error": {
+            "cannot_connect": "Tilkobling mislyktes",
+            "invalid_auth": "Ugyldig godkjenning",
+            "unknown": "Uventet feil"
+        },
+        "step": {
+            "user": {
+                "data": {
+                    "password": "Passord",
+                    "url": "URL",
+                    "username": "Brukernavn"
+                }
+            }
+        }
+    }
+}

homeassistant/components/light/translations/hu.json

@@ -4,8 +4,8 @@
             "brightness_decrease": "{entity_name} f\u00e9nyerej\u00e9nek cs\u00f6kkent\u00e9se",
             "brightness_increase": "{entity_name} f\u00e9nyerej\u00e9nek n\u00f6vel\u00e9se",
             "flash": "Vaku {entity_name}",
-            "toggle": "{entity_name} fel/lekapcsol\u00e1sa",
+            "toggle": "{entity_name} be/kikapcsol\u00e1sa",
-            "turn_off": "{entity_name} lekapcsol\u00e1sa",
+            "turn_off": "{entity_name} kikapcsol\u00e1sa",
             "turn_on": "{entity_name} felkapcsol\u00e1sa"
         },
         "condition_type": {

homeassistant/components/lookin/translations/id.json

@@ -0,0 +1,28 @@
+{
+    "config": {
+        "abort": {
+            "already_configured": "Perangkat sudah dikonfigurasi",
+            "already_in_progress": "Alur konfigurasi sedang berlangsung",
+            "cannot_connect": "Gagal terhubung",
+            "no_devices_found": "Tidak ada perangkat yang ditemukan di jaringan"
+        },
+        "error": {
+            "cannot_connect": "Gagal terhubung",
+            "no_devices_found": "Tidak ada perangkat yang ditemukan di jaringan",
+            "unknown": "Kesalahan yang tidak diharapkan"
+        },
+        "flow_title": "{name} ({host})",
+        "step": {
+            "device_name": {
+                "data": {
+                    "name": "Nama"
+                }
+            },
+            "user": {
+                "data": {
+                    "ip_address": "Alamat IP"
+                }
+            }
+        }
+    }
+}

homeassistant/components/modem_callerid/translations/fr.json

@@ -0,0 +1,19 @@
+{
+    "config": {
+        "abort": {
+            "already_configured": "L'appareil est d\u00e9j\u00e0 configur\u00e9",
+            "already_in_progress": "La configuration est d\u00e9j\u00e0 en cours"
+        },
+        "error": {
+            "cannot_connect": "\u00c9chec de connexion"
+        },
+        "step": {
+            "user": {
+                "data": {
+                    "name": "Nom",
+                    "port": "Port"
+                }
+            }
+        }
+    }
+}

homeassistant/components/nanoleaf/translations/id.json

@@ -11,6 +11,7 @@
             "cannot_connect": "Gagal terhubung",
             "unknown": "Kesalahan yang tidak diharapkan"
         },
+        "flow_title": "{name}",
         "step": {
             "user": {
                 "data": {

homeassistant/components/nest/translations/id.json

@@ -18,6 +18,11 @@
             "unknown": "Kesalahan yang tidak diharapkan"
         },
         "step": {
+            "auth": {
+                "data": {
+                    "code": "Token Akses"
+                }
+            },
             "init": {
                 "data": {
                     "flow_impl": "Penyedia"

homeassistant/components/netatmo/translations/id.json

@@ -4,6 +4,7 @@
             "authorize_url_timeout": "Tenggang waktu pembuatan URL otorisasi habis.",
             "missing_configuration": "Komponen tidak dikonfigurasi. Ikuti petunjuk dalam dokumentasi.",
             "no_url_available": "Tidak ada URL yang tersedia. Untuk informasi tentang kesalahan ini, [lihat bagian bantuan]({docs_url})",
+            "reauth_successful": "Autentikasi ulang berhasil",
             "single_instance_allowed": "Sudah dikonfigurasi. Hanya satu konfigurasi yang diizinkan."
         },
         "create_entry": {
@@ -12,6 +13,9 @@
         "step": {
             "pick_implementation": {
                 "title": "Pilih Metode Autentikasi"
+            },
+            "reauth_confirm": {
+                "title": "Autentikasi Ulang Integrasi"
             }
         }
     },

homeassistant/components/nfandroidtv/translations/id.json

@@ -4,7 +4,16 @@
             "already_configured": "Perangkat sudah dikonfigurasi"
         },
         "error": {
-            "cannot_connect": "Gagal terhubung"
+            "cannot_connect": "Gagal terhubung",
+            "unknown": "Kesalahan yang tidak diharapkan"
+        },
+        "step": {
+            "user": {
+                "data": {
+                    "host": "Host",
+                    "name": "Nama"
+                }
+            }
         }
     }
 }

homeassistant/components/notion/translations/id.json

@@ -1,13 +1,21 @@
 {
     "config": {
         "abort": {
-            "already_configured": "Akun sudah dikonfigurasi"
+            "already_configured": "Akun sudah dikonfigurasi",
+            "reauth_successful": "Autentikasi ulang berhasil"
         },
         "error": {
             "invalid_auth": "Autentikasi tidak valid",
-            "no_devices": "Tidak ada perangkat yang ditemukan di akun"
+            "no_devices": "Tidak ada perangkat yang ditemukan di akun",
+            "unknown": "Kesalahan yang tidak diharapkan"
         },
         "step": {
+            "reauth_confirm": {
+                "data": {
+                    "password": "Kata Sandi"
+                },
+                "title": "Autentikasi Ulang Integrasi"
+            },
             "user": {
                 "data": {
                     "password": "Kata Sandi",

homeassistant/components/octoprint/translations/id.json

@@ -0,0 +1,18 @@
+{
+    "config": {
+        "abort": {
+            "cannot_connect": "Gagal terhubung",
+            "unknown": "Kesalahan yang tidak diharapkan"
+        },
+        "error": {
+            "cannot_connect": "Gagal terhubung"
+        },
+        "step": {
+            "user": {
+                "data": {
+                    "username": "Nama Pengguna"
+                }
+            }
+        }
+    }
+}

homeassistant/components/opengarage/translations/fr.json

@@ -0,0 +1,21 @@
+{
+    "config": {
+        "abort": {
+            "already_configured": "L'appareil est d\u00e9j\u00e0 configur\u00e9"
+        },
+        "error": {
+            "cannot_connect": "\u00c9chec de connexion",
+            "invalid_auth": "Authentification invalide",
+            "unknown": "Erreur inattendue"
+        },
+        "step": {
+            "user": {
+                "data": {
+                    "host": "H\u00f4te",
+                    "port": "Port",
+                    "verify_ssl": "V\u00e9rifier le certificat SSL"
+                }
+            }
+        }
+    }
+}

homeassistant/components/opengarage/translations/id.json

@@ -0,0 +1,21 @@
+{
+    "config": {
+        "abort": {
+            "already_configured": "Perangkat sudah dikonfigurasi"
+        },
+        "error": {
+            "cannot_connect": "Gagal terhubung",
+            "invalid_auth": "Autentikasi tidak valid",
+            "unknown": "Kesalahan yang tidak diharapkan"
+        },
+        "step": {
+            "user": {
+                "data": {
+                    "host": "Host",
+                    "port": "Port",
+                    "verify_ssl": "Verifikasi sertifikat SSL"
+                }
+            }
+        }
+    }
+}

homeassistant/components/owntracks/translations/de.json

@@ -4,7 +4,7 @@
             "single_instance_allowed": "Bereits konfiguriert. Nur eine einzige Konfiguration m\u00f6glich."
         },
         "create_entry": {
-            "default": "Unter Android \u00f6ffne [die OwnTracks App]({android_url}), gehe zu Einstellungen -> Verbindung. \u00c4ndere die folgenden Einstellungen:\n - Modus: Privat HTTP\n - Host: {webhook_url}\n - Identifikation:\n   - Benutzername: `'<Your name>'`\n   - Ger\u00e4te-ID: `'<Your device name>'`\n\nUnter iOS \u00f6ffne [die OwnTracks App]({ios_url}), tippe auf das (i)-Symbol oben links -> Einstellungen. \u00c4ndere die folgenden Einstellungen:\n - Modus: HTTP\n - URL: {webhook_url}\n - Authentifizierung einschalten\n - UserID: `'<Your name>'`\n\n{secret}\n\nWeitere Informationen findest du in [der Dokumentation]({docs_url})."
+            "default": "\n\nUnter Android \u00f6ffne [die OwnTracks App]({android_url}), gehe zu Einstellungen -> Verbindung. \u00c4ndere die folgenden Einstellungen:\n - Modus: Privat HTTP\n - Host: {webhook_url}\n - Identifikation:\n   - Benutzername: `'<Your name>'`\n   - Ger\u00e4te-ID: `'<Your device name>'`\n\nUnter iOS \u00f6ffne [die OwnTracks App]({ios_url}), tippe auf das (i)-Symbol oben links -> Einstellungen. \u00c4ndere die folgenden Einstellungen:\n - Modus: HTTP\n - URL: {webhook_url}\n - Authentifizierung einschalten\n - UserID: `'<Your name>'`\n\n{secret}\n\nWeitere Informationen findest du in [der Dokumentation]({docs_url})."
         },
         "step": {
             "user": {

homeassistant/components/owntracks/translations/fr.json

@@ -4,7 +4,7 @@
             "single_instance_allowed": "D\u00e9j\u00e0 configur\u00e9. Une seule configuration possible."
         },
         "create_entry": {
-            "default": "\n\n Sous Android, ouvrez [l'application OwnTracks]({android_url}), acc\u00e9dez \u00e0 Pr\u00e9f\u00e9rences - > Connexion. Modifiez les param\u00e8tres suivants: \n - Mode: HTTP priv\u00e9 \n - H\u00f4te: {webhook_url} \n - Identification: \n - Nom d'utilisateur: `'<Votre nom>'` \n - ID de p\u00e9riph\u00e9rique: `'<Nom de votre appareil>'` \n\n Sur iOS, ouvrez [l'application OwnTracks]({ios_url}), appuyez sur l'ic\u00f4ne (i) en haut \u00e0 gauche - > param\u00e8tres. Modifiez les param\u00e8tres suivants: \n - Mode: HTTP \n - URL: {webhook_url} \n - Activer l'authentification \n - ID utilisateur: `'<Votre nom>'` \n\n {secret} \n \n Voir [la documentation]({docs_url}) pour plus d'informations."
+            "default": "\n\nSous Android, ouvrez [l'application OwnTracks]({android_url}), acc\u00e9dez \u00e0 Pr\u00e9f\u00e9rences - > Connexion. Modifiez les param\u00e8tres suivants: \n - Mode: HTTP priv\u00e9 \n - H\u00f4te: {webhook_url} \n - Identification: \n - Nom d'utilisateur: `'<Votre nom>'` \n - ID de p\u00e9riph\u00e9rique: `'<Nom de votre appareil>'` \n\n Sur iOS, ouvrez [l'application OwnTracks]({ios_url}), appuyez sur l'ic\u00f4ne (i) en haut \u00e0 gauche - > param\u00e8tres. Modifiez les param\u00e8tres suivants: \n - Mode: HTTP \n - URL: {webhook_url} \n - Activer l'authentification \n - ID utilisateur: `'<Votre nom>'` \n\n {secret} \n \n Voir [la documentation]({docs_url}) pour plus d'informations."
         },
         "step": {
             "user": {

homeassistant/components/prosegur/translations/id.json

@@ -19,7 +19,8 @@
             "user": {
                 "data": {
                     "country": "Negara",
-                    "password": "Kata Sandi"
+                    "password": "Kata Sandi",
+                    "username": "Nama Pengguna"
                 }
             }
         }

homeassistant/components/rdw/translations/fr.json

@@ -0,0 +1,7 @@
+{
+    "config": {
+        "error": {
+            "cannot_connect": "\u00c9chec de connexion"
+        }
+    }
+}

homeassistant/components/rdw/translations/id.json

@@ -0,0 +1,7 @@
+{
+    "config": {
+        "error": {
+            "cannot_connect": "Gagal terhubung"
+        }
+    }
+}

homeassistant/components/renault/translations/fr.json

@@ -15,6 +15,9 @@
                 "title": "S\u00e9lectionner l'identifiant du compte Kamereon"
             },
             "reauth_confirm": {
+                "data": {
+                    "password": "Mot de passe"
+                },
                 "title": "R\u00e9-authentifier l'int\u00e9gration"
             },
             "user": {

homeassistant/components/ridwell/translations/fr.json

@@ -0,0 +1,26 @@
+{
+    "config": {
+        "abort": {
+            "already_configured": "Le compte est d\u00e9j\u00e0 configur\u00e9",
+            "reauth_successful": "La r\u00e9-authentification a r\u00e9ussi"
+        },
+        "error": {
+            "invalid_auth": "Authentification invalide",
+            "unknown": "Erreur inattendue"
+        },
+        "step": {
+            "reauth_confirm": {
+                "data": {
+                    "password": "Mot de passe"
+                },
+                "title": "R\u00e9-authentifier l'int\u00e9gration"
+            },
+            "user": {
+                "data": {
+                    "password": "Mot de passe",
+                    "username": "Nom d'utilisateur"
+                }
+            }
+        }
+    }
+}

homeassistant/components/ridwell/translations/id.json

@@ -0,0 +1,22 @@
+{
+    "config": {
+        "error": {
+            "invalid_auth": "Autentikasi tidak valid",
+            "unknown": "Kesalahan yang tidak diharapkan"
+        },
+        "step": {
+            "reauth_confirm": {
+                "data": {
+                    "password": "Kata Sandi"
+                },
+                "title": "Autentikasi Ulang Integrasi"
+            },
+            "user": {
+                "data": {
+                    "password": "Kata Sandi",
+                    "username": "Nama Pengguna"
+                }
+            }
+        }
+    }
+}

homeassistant/components/sensor/translations/ca.json

@@ -6,6 +6,7 @@
             "is_carbon_monoxide": "Concentraci\u00f3 actual de mon\u00f2xid de carboni de {entity_name}",
             "is_current": "Intensitat actual de {entity_name}",
             "is_energy": "Energia actual de {entity_name}",
+            "is_frequency": "Freq\u00fc\u00e8ncia actual de {entity_name}",
             "is_gas": "Gas actual de {entity_name}",
             "is_humidity": "Humitat actual de {entity_name}",
             "is_illuminance": "Il\u00b7luminaci\u00f3 actual de {entity_name}",
@@ -32,6 +33,7 @@
             "carbon_monoxide": "Canvia la concentraci\u00f3 de mon\u00f2xid de carboni de {entity_name}",
             "current": "Canvia la intensitat de {entity_name}",
             "energy": "Canvia l'energia de {entity_name}",
+            "frequency": "Canvia la freq\u00fc\u00e8ncia de {entity_name}",
             "gas": "Canvia el gas de {entity_name}",
             "humidity": "Canvia la humitat de {entity_name}",
             "illuminance": "Canvia la il\u00b7luminaci\u00f3 de {entity_name}",

homeassistant/components/sensor/translations/de.json

@@ -6,6 +6,7 @@
             "is_carbon_monoxide": "Aktuelle {entity_name} Kohlenstoffmonoxid-Konzentration",
             "is_current": "Aktueller Strom von {entity_name}",
             "is_energy": "Aktuelle Energie von {entity_name}",
+            "is_frequency": "Aktuelle {entity_name} Frequenz",
             "is_gas": "Aktuelles {entity_name} Gas",
             "is_humidity": "{entity_name} Feuchtigkeit",
             "is_illuminance": "Aktuelle {entity_name} Helligkeit",
@@ -32,6 +33,7 @@
             "carbon_monoxide": "{entity_name} Kohlenstoffmonoxid-Konzentrations\u00e4nderung",
             "current": "{entity_name} Stromver\u00e4nderung",
             "energy": "{entity_name} Energie\u00e4nderungen",
+            "frequency": "{entity_name} Frequenz\u00e4nderungen",
             "gas": "{entity_name} Gas\u00e4nderungen",
             "humidity": "{entity_name} Feuchtigkeits\u00e4nderungen",
             "illuminance": "{entity_name} Helligkeits\u00e4nderungen",

homeassistant/components/sensor/translations/et.json

@@ -6,6 +6,7 @@
             "is_carbon_monoxide": "{entity_name} praegune vingugaasi tase",
             "is_current": "Praegune {entity_name} voolutugevus",
             "is_energy": "Praegune {entity_name} v\u00f5imsus",
+            "is_frequency": "Praegune {entity_name} sagedus",
             "is_gas": "Praegune {entity_name} gaas",
             "is_humidity": "Praegune {entity_name} niiskus",
             "is_illuminance": "Praegune {entity_name} valgustatus",
@@ -32,6 +33,7 @@
             "carbon_monoxide": "{entity_name} vingugaasi tase muutus",
             "current": "{entity_name} voolutugevus muutub",
             "energy": "{entity_name} v\u00f5imsus muutub",
+            "frequency": "{entity_name} sagedus muutub",
             "gas": "{entity_name} gaasivahetus",
             "humidity": "{entity_name} niiskus muutub",
             "illuminance": "{entity_name} valgustustugevus muutub",

homeassistant/components/sensor/translations/hu.json

@@ -6,6 +6,7 @@
             "is_carbon_monoxide": "Jelenlegi {entity_name} sz\u00e9n-monoxid koncentr\u00e1ci\u00f3 szint",
             "is_current": "Jelenlegi {entity_name} \u00e1ram",
             "is_energy": "A jelenlegi {entity_name} energia",
+            "is_frequency": "Aktu\u00e1lis {entity_name} gyakoris\u00e1g",
             "is_gas": "Jelenlegi {entity_name} g\u00e1z",
             "is_humidity": "{entity_name} aktu\u00e1lis p\u00e1ratartalma",
             "is_illuminance": "{entity_name} aktu\u00e1lis megvil\u00e1g\u00edt\u00e1sa",
@@ -32,6 +33,7 @@
             "carbon_monoxide": "{entity_name} sz\u00e9n-monoxid koncentr\u00e1ci\u00f3ja megv\u00e1ltozik",
             "current": "{entity_name} aktu\u00e1lis v\u00e1ltoz\u00e1sai",
             "energy": "{entity_name} energiav\u00e1ltoz\u00e1sa",
+            "frequency": "{entity_name} gyakoris\u00e1gi v\u00e1ltoz\u00e1sok",
             "gas": "{entity_name} g\u00e1z v\u00e1ltoz\u00e1sok",
             "humidity": "{entity_name} p\u00e1ratartalma v\u00e1ltozik",
             "illuminance": "{entity_name} megvil\u00e1g\u00edt\u00e1sa v\u00e1ltozik",

homeassistant/components/sensor/translations/ru.json

@@ -6,6 +6,7 @@
             "is_carbon_monoxide": "{entity_name} \u0438\u043c\u0435\u0435\u0442 \u0442\u0435\u043a\u0443\u0449\u0435\u0435 \u0437\u043d\u0430\u0447\u0435\u043d\u0438\u0435 \u0443\u0440\u043e\u0432\u043d\u044f \u043a\u043e\u043d\u0446\u0435\u043d\u0442\u0440\u0430\u0446\u0438\u0438 \u0443\u0433\u0430\u0440\u043d\u043e\u0433\u043e \u0433\u0430\u0437\u0430",
             "is_current": "{entity_name} \u0438\u043c\u0435\u0435\u0442 \u0442\u0435\u043a\u0443\u0449\u0435\u0435 \u0437\u043d\u0430\u0447\u0435\u043d\u0438\u0435 \u0441\u0438\u043b\u044b \u0442\u043e\u043a\u0430",
             "is_energy": "{entity_name} \u0438\u043c\u0435\u0435\u0442 \u0442\u0435\u043a\u0443\u0449\u0435\u0435 \u0437\u043d\u0430\u0447\u0435\u043d\u0438\u0435 \u043c\u043e\u0449\u043d\u043e\u0441\u0442\u0438",
+            "is_frequency": "{entity_name} \u0438\u043c\u0435\u0435\u0442 \u0442\u0435\u043a\u0443\u0449\u0435\u0435 \u0437\u043d\u0430\u0447\u0435\u043d\u0438\u0435",
             "is_gas": "{entity_name} \u0438\u043c\u0435\u0435\u0442 \u0442\u0435\u043a\u0443\u0449\u0435\u0435 \u0437\u043d\u0430\u0447\u0435\u043d\u0438\u0435",
             "is_humidity": "{entity_name} \u0438\u043c\u0435\u0435\u0442 \u0442\u0435\u043a\u0443\u0449\u0435\u0435 \u0437\u043d\u0430\u0447\u0435\u043d\u0438\u0435",
             "is_illuminance": "{entity_name} \u0438\u043c\u0435\u0435\u0442 \u0442\u0435\u043a\u0443\u0449\u0435\u0435 \u0437\u043d\u0430\u0447\u0435\u043d\u0438\u0435",
@@ -32,6 +33,7 @@
             "carbon_monoxide": "{entity_name} \u0438\u0437\u043c\u0435\u043d\u044f\u0435\u0442 \u0437\u043d\u0430\u0447\u0435\u043d\u0438\u0435",
             "current": "{entity_name} \u0438\u0437\u043c\u0435\u043d\u044f\u0435\u0442 \u0437\u043d\u0430\u0447\u0435\u043d\u0438\u0435 \u0441\u0438\u043b\u044b \u0442\u043e\u043a\u0430",
             "energy": "{entity_name} \u0438\u0437\u043c\u0435\u043d\u044f\u0435\u0442 \u0437\u043d\u0430\u0447\u0435\u043d\u0438\u0435 \u043c\u043e\u0449\u043d\u043e\u0441\u0442\u0438",
+            "frequency": "{entity_name} \u0438\u0437\u043c\u0435\u043d\u044f\u0435\u0442 \u0437\u043d\u0430\u0447\u0435\u043d\u0438\u0435",
             "gas": "{entity_name} \u0438\u0437\u043c\u0435\u043d\u044f\u0435\u0442 \u0441\u043e\u0434\u0435\u0440\u0436\u0430\u043d\u0438\u0435 \u0433\u0430\u0437\u0430",
             "humidity": "{entity_name} \u0438\u0437\u043c\u0435\u043d\u044f\u0435\u0442 \u0437\u043d\u0430\u0447\u0435\u043d\u0438\u0435",
             "illuminance": "{entity_name} \u0438\u0437\u043c\u0435\u043d\u044f\u0435\u0442 \u0437\u043d\u0430\u0447\u0435\u043d\u0438\u0435",

homeassistant/components/shelly/translations/fr.json

@@ -38,7 +38,7 @@
         },
         "trigger_type": {
             "double": "{subtype} double-cliqu\u00e9",
-            "long": " {sous-type} long cliqu\u00e9",
+            "long": "{subtype} long cliqu\u00e9",
             "long_push": "{subtype} appui long",
             "long_single": "{subtype} clic long et simple clic",
             "single": "{subtype} simple clic",

homeassistant/components/soma/translations/id.json

@@ -1,14 +1,14 @@
 {
     "config": {
         "abort": {
-            "already_setup": "Anda hanya dapat mengonfigurasi satu akun Soma.",
+            "already_setup": "Sudah dikonfigurasi. Hanya satu konfigurasi yang diizinkan.",
             "authorize_url_timeout": "Tenggang waktu pembuatan URL otorisasi habis.",
-            "connection_error": "Gagal menyambungkan ke SOMA Connect.",
+            "connection_error": "Gagal terhubung",
             "missing_configuration": "Komponen Soma tidak dikonfigurasi. Ikuti petunjuk dalam dokumentasi.",
             "result_error": "SOMA Connect merespons dengan status kesalahan."
         },
         "create_entry": {
-            "default": "Berhasil mengautentikasi dengan Soma."
+            "default": "Berhasil diautentikasi"
         },
         "step": {
             "user": {

homeassistant/components/stookalert/translations/fr.json

@@ -0,0 +1,7 @@
+{
+    "config": {
+        "abort": {
+            "already_configured": "Le service est d\u00e9j\u00e0 configur\u00e9"
+        }
+    }
+}

homeassistant/components/stookalert/translations/id.json

@@ -0,0 +1,7 @@
+{
+    "config": {
+        "abort": {
+            "already_configured": "Layanan sudah dikonfigurasi"
+        }
+    }
+}

homeassistant/components/switchbot/translations/fr.json

@@ -0,0 +1,7 @@
+{
+    "config": {
+        "abort": {
+            "cannot_connect": "\u00c9chec de connexion"
+        }
+    }
+}

homeassistant/components/switchbot/translations/id.json

@@ -2,6 +2,7 @@
     "config": {
         "abort": {
             "already_configured_device": "Perangkat sudah dikonfigurasi",
+            "cannot_connect": "Gagal terhubung",
             "switchbot_unsupported_type": "Jenis Switchbot yang tidak didukung.",
             "unknown": "Kesalahan yang tidak diharapkan"
         },

homeassistant/components/synology_dsm/translations/id.json

@@ -32,6 +32,7 @@
             },
             "reauth": {
                 "data": {
+                    "password": "Kata Sandi",
                     "username": "Nama Pengguna"
                 },
                 "title": "Autentikasi Ulang Integrasi Synology DSM"

homeassistant/components/totalconnect/translations/ca.json

@@ -2,6 +2,7 @@
     "config": {
         "abort": {
             "already_configured": "El compte ja est\u00e0 configurat",
+            "no_locations": "No hi ha ubicacions disponibles per a aquest usuari, comprova la configuraci\u00f3 de TotalConnect",
             "reauth_successful": "Re-autenticaci\u00f3 realitzada correctament"
         },
         "error": {

homeassistant/components/totalconnect/translations/de.json

@@ -2,6 +2,7 @@
     "config": {
         "abort": {
             "already_configured": "Konto wurde bereits konfiguriert",
+            "no_locations": "F\u00fcr diesen Benutzer sind keine Standorte verf\u00fcgbar, \u00fcberpr\u00fcfe die TotalConnect-Einstellungen",
             "reauth_successful": "Die erneute Authentifizierung war erfolgreich"
         },
         "error": {

homeassistant/components/totalconnect/translations/en.json

@@ -2,6 +2,7 @@
     "config": {
         "abort": {
             "already_configured": "Account is already configured",
+            "no_locations": "No locations are available for this user, check TotalConnect settings",
             "reauth_successful": "Re-authentication was successful"
         },
         "error": {

homeassistant/components/totalconnect/translations/et.json

@@ -2,6 +2,7 @@
     "config": {
         "abort": {
             "already_configured": "Konto on juba seadistatud",
+            "no_locations": "Kasutaja jaoks ei ole asukohti saadaval, kontrolli TotalConnecti seadeid.",
             "reauth_successful": "Taastuvastamine \u00f5nnestus"
         },
         "error": {

homeassistant/components/totalconnect/translations/hu.json

@@ -2,6 +2,7 @@
     "config": {
         "abort": {
             "already_configured": "A fi\u00f3k m\u00e1r konfigur\u00e1lva van",
+            "no_locations": "Nincs el\u00e9rhet\u0151 helyzet a felhaszn\u00e1l\u00f3 sz\u00e1m\u00e1ra, ellen\u0151rizze a TotalConnect be\u00e1ll\u00edt\u00e1sait.",
             "reauth_successful": "Az \u00fajrahiteles\u00edt\u00e9s sikeres volt."
         },
         "error": {

homeassistant/components/totalconnect/translations/ru.json

@@ -2,6 +2,7 @@
     "config": {
         "abort": {
             "already_configured": "\u042d\u0442\u0430 \u0443\u0447\u0451\u0442\u043d\u0430\u044f \u0437\u0430\u043f\u0438\u0441\u044c \u0443\u0436\u0435 \u0434\u043e\u0431\u0430\u0432\u043b\u0435\u043d\u0430 \u0432 Home Assistant.",
+            "no_locations": "\u0414\u043b\u044f \u044d\u0442\u043e\u0433\u043e \u043f\u043e\u043b\u044c\u0437\u043e\u0432\u0430\u0442\u0435\u043b\u044f \u043d\u0435\u0442 \u0434\u043e\u0441\u0442\u0443\u043f\u043d\u044b\u0445 \u043c\u0435\u0441\u0442\u043e\u043f\u043e\u043b\u043e\u0436\u0435\u043d\u0438\u0439, \u043f\u0440\u043e\u0432\u0435\u0440\u044c\u0442\u0435 \u043d\u0430\u0441\u0442\u0440\u043e\u0439\u043a\u0438 TotalConnect.",
             "reauth_successful": "\u041f\u043e\u0432\u0442\u043e\u0440\u043d\u0430\u044f \u0430\u0443\u0442\u0435\u043d\u0442\u0438\u0444\u0438\u043a\u0430\u0446\u0438\u044f \u0432\u044b\u043f\u043e\u043b\u043d\u0435\u043d\u0430 \u0443\u0441\u043f\u0435\u0448\u043d\u043e."
         },
         "error": {

homeassistant/components/tplink/translations/fr.json

@@ -1,12 +1,21 @@
 {
     "config": {
         "abort": {
+            "already_configured": "L'appareil est d\u00e9j\u00e0 configur\u00e9",
             "no_devices_found": "Aucun appareil trouv\u00e9 sur le r\u00e9seau",
             "single_instance_allowed": "D\u00e9j\u00e0 configur\u00e9. Une seule configuration possible."
         },
+        "error": {
+            "cannot_connect": "\u00c9chec de connexion"
+        },
         "step": {
             "confirm": {
                 "description": "Voulez-vous configurer TP-Link smart devices?"
+            },
+            "user": {
+                "data": {
+                    "host": "H\u00f4te"
+                }
             }
         }
     }

homeassistant/components/tplink/translations/id.json

@@ -1,12 +1,22 @@
 {
     "config": {
         "abort": {
+            "already_configured": "Perangkat sudah dikonfigurasi",
             "no_devices_found": "Tidak ada perangkat yang ditemukan di jaringan",
             "single_instance_allowed": "Sudah dikonfigurasi. Hanya satu konfigurasi yang diizinkan."
         },
+        "error": {
+            "cannot_connect": "Gagal terhubung"
+        },
+        "flow_title": "{name} {model} ({host})",
         "step": {
             "confirm": {
                 "description": "Ingin menyiapkan perangkat cerdas TP-Link?"
+            },
+            "user": {
+                "data": {
+                    "host": "Host"
+                }
             }
         }
     }

homeassistant/components/tractive/translations/id.json

@@ -0,0 +1,20 @@
+{
+    "config": {
+        "abort": {
+            "already_configured": "Perangkat sudah dikonfigurasi",
+            "reauth_successful": "Autentikasi ulang berhasil"
+        },
+        "error": {
+            "invalid_auth": "Autentikasi tidak valid",
+            "unknown": "Kesalahan yang tidak diharapkan"
+        },
+        "step": {
+            "user": {
+                "data": {
+                    "email": "Email",
+                    "password": "Kata Sandi"
+                }
+            }
+        }
+    }
+}

homeassistant/components/tuya/translations/id.json

@@ -12,13 +12,13 @@
         "step": {
             "user": {
                 "data": {
-                    "country_code": "Kode negara akun Anda (mis., 1 untuk AS atau 86 untuk China)",
+                    "country_code": "Negara",
                     "password": "Kata Sandi",
                     "platform": "Aplikasi tempat akun Anda terdaftar",
-                    "username": "Nama Pengguna"
+                    "username": "Akun"
                 },
                 "description": "Masukkan kredensial Tuya Anda.",
-                "title": "Tuya"
+                "title": "Integrasi Tuya"
             }
         }
     },

homeassistant/components/tuya/translations/select.fr.json

@@ -0,0 +1,17 @@
+{
+    "state": {
+        "tuya__basic_nightvision": {
+            "1": "Inactif",
+            "2": "Actif"
+        },
+        "tuya__light_mode": {
+            "none": "Inactif"
+        },
+        "tuya__relay_status": {
+            "off": "Inactif",
+            "on": "Actif",
+            "power_off": "Inactif",
+            "power_on": "Actif"
+        }
+    }
+}

homeassistant/components/tuya/translations/select.id.json

@@ -0,0 +1,13 @@
+{
+    "state": {
+        "tuya__light_mode": {
+            "none": "Mati"
+        },
+        "tuya__relay_status": {
+            "off": "Mati",
+            "on": "Nyala",
+            "power_off": "Mati",
+            "power_on": "Nyala"
+        }
+    }
+}

homeassistant/components/tuya/translations/select.nl.json

@@ -20,6 +20,7 @@
         },
         "tuya__led_type": {
             "halogen": "Halogeen",
+            "incandescent": "Witgloeiend",
             "led": "LED"
         },
         "tuya__light_mode": {

homeassistant/components/uptimerobot/translations/id.json

@@ -1,6 +1,7 @@
 {
     "config": {
         "abort": {
+            "already_configured": "Akun sudah dikonfigurasi",
             "reauth_successful": "Autentikasi ulang berhasil",
             "unknown": "Kesalahan yang tidak diharapkan"
         },

homeassistant/components/venstar/translations/fr.json

@@ -0,0 +1,18 @@
+{
+    "config": {
+        "error": {
+            "cannot_connect": "\u00c9chec de connexion"
+        },
+        "step": {
+            "user": {
+                "data": {
+                    "host": "H\u00f4te",
+                    "password": "Mot de passe",
+                    "pin": "Code PIN",
+                    "ssl": "Utilise un certificat SSL",
+                    "username": "Nom d'utilisateur"
+                }
+            }
+        }
+    }
+}

homeassistant/components/vlc_telnet/translations/fr.json

@@ -0,0 +1,24 @@
+{
+    "config": {
+        "abort": {
+            "already_configured": "Le service est d\u00e9j\u00e0 configur\u00e9",
+            "cannot_connect": "\u00c9chec de connexion",
+            "invalid_auth": "Authentification invalide",
+            "reauth_successful": "La r\u00e9-authentification a r\u00e9ussi",
+            "unknown": "Erreur inattendue"
+        },
+        "step": {
+            "reauth_confirm": {
+                "data": {
+                    "password": "Mot de passe"
+                }
+            },
+            "user": {
+                "data": {
+                    "password": "Mot de passe",
+                    "port": "Port"
+                }
+            }
+        }
+    }
+}

homeassistant/components/vlc_telnet/translations/id.json

@@ -0,0 +1,27 @@
+{
+    "config": {
+        "abort": {
+            "already_configured": "Layanan sudah dikonfigurasi",
+            "cannot_connect": "Gagal terhubung",
+            "invalid_auth": "Autentikasi tidak valid",
+            "reauth_successful": "Autentikasi ulang berhasil",
+            "unknown": "Kesalahan yang tidak diharapkan"
+        },
+        "error": {
+            "cannot_connect": "Gagal terhubung",
+            "invalid_auth": "Autentikasi tidak valid",
+            "unknown": "Kesalahan yang tidak diharapkan"
+        },
+        "flow_title": "{host}",
+        "step": {
+            "user": {
+                "data": {
+                    "host": "Host",
+                    "name": "Nama",
+                    "password": "Kata Sandi",
+                    "port": "Port"
+                }
+            }
+        }
+    }
+}

homeassistant/components/wallbox/translations/ca.json

@@ -1,14 +1,22 @@
 {
     "config": {
         "abort": {
-            "already_configured": "El dispositiu ja est\u00e0 configurat"
+            "already_configured": "El dispositiu ja est\u00e0 configurat",
+            "reauth_successful": "Re-autenticaci\u00f3 realitzada correctament"
         },
         "error": {
             "cannot_connect": "Ha fallat la connexi\u00f3",
             "invalid_auth": "Autenticaci\u00f3 inv\u00e0lida",
+            "reauth_invalid": "Ha fallat la re-autenticaci\u00f3; el n\u00famero de s\u00e8rie no coincideix amb l'original",
             "unknown": "Error inesperat"
         },
         "step": {
+            "reauth_confirm": {
+                "data": {
+                    "password": "Contrasenya",
+                    "username": "Nom d'usuari"
+                }
+            },
             "user": {
                 "data": {
                     "password": "Contrasenya",

homeassistant/components/wallbox/translations/de.json

@@ -1,14 +1,22 @@
 {
     "config": {
         "abort": {
-            "already_configured": "Ger\u00e4t ist bereits konfiguriert"
+            "already_configured": "Ger\u00e4t ist bereits konfiguriert",
+            "reauth_successful": "Die erneute Authentifizierung war erfolgreich"
         },
         "error": {
             "cannot_connect": "Verbindung fehlgeschlagen",
             "invalid_auth": "Ung\u00fcltige Authentifizierung",
+            "reauth_invalid": "Die erneute Authentifizierung ist fehlgeschlagen; Seriennummer stimmt nicht mit Original \u00fcberein",
             "unknown": "Unerwarteter Fehler"
         },
         "step": {
+            "reauth_confirm": {
+                "data": {
+                    "password": "Passwort",
+                    "username": "Benutzername"
+                }
+            },
             "user": {
                 "data": {
                     "password": "Passwort",

homeassistant/components/wallbox/translations/en.json

@@ -25,5 +25,6 @@
                 }
             }
         }
-    }
+    },
+    "title": "Wallbox"
 }

homeassistant/components/wallbox/translations/et.json

@@ -1,14 +1,22 @@
 {
     "config": {
         "abort": {
-            "already_configured": "Seade on juba h\u00e4\u00e4lestatud"
+            "already_configured": "Seade on juba h\u00e4\u00e4lestatud",
+            "reauth_successful": "Taastuvastamine \u00f5nnestus"
         },
         "error": {
             "cannot_connect": "\u00dchendamine nurjus",
             "invalid_auth": "Tuvastamine nurjus",
+            "reauth_invalid": "Taastuvastamine nurjus, seerianumber ei vasta originaalile",
             "unknown": "Tundmatu t\u00f5rge"
         },
         "step": {
+            "reauth_confirm": {
+                "data": {
+                    "password": "Salas\u00f5na",
+                    "username": "Kasutajanimi"
+                }
+            },
             "user": {
                 "data": {
                     "password": "Salas\u00f5na",

homeassistant/components/wallbox/translations/fr.json

@@ -1,7 +1,8 @@
 {
     "config": {
         "abort": {
-            "already_configured": "L'appareil est d\u00e9j\u00e0 configur\u00e9"
+            "already_configured": "L'appareil est d\u00e9j\u00e0 configur\u00e9",
+            "reauth_successful": "La r\u00e9-authentification a r\u00e9ussi"
         },
         "error": {
             "cannot_connect": "\u00c9chec de connexion",
@@ -9,6 +10,12 @@
             "unknown": "Erreur inattendue"
         },
         "step": {
+            "reauth_confirm": {
+                "data": {
+                    "password": "Mot de passe",
+                    "username": "Nom d'utilisateur"
+                }
+            },
             "user": {
                 "data": {
                     "password": "Mot de passe",

homeassistant/components/wallbox/translations/hu.json

@@ -1,14 +1,22 @@
 {
     "config": {
         "abort": {
-            "already_configured": "Az eszk\u00f6z m\u00e1r konfigur\u00e1lva van"
+            "already_configured": "Az eszk\u00f6z m\u00e1r konfigur\u00e1lva van",
+            "reauth_successful": "Az \u00fajrahiteles\u00edt\u00e9s sikeres volt."
         },
         "error": {
             "cannot_connect": "Sikertelen csatlakoz\u00e1s",
             "invalid_auth": "\u00c9rv\u00e9nytelen hiteles\u00edt\u00e9s",
+            "reauth_invalid": "Az \u00fajrahiteles\u00edt\u00e9s sikertelen volt; A sorozatsz\u00e1m nem egyezik az eredetivel",
             "unknown": "V\u00e1ratlan hiba t\u00f6rt\u00e9nt"
         },
         "step": {
+            "reauth_confirm": {
+                "data": {
+                    "password": "Jelsz\u00f3",
+                    "username": "Felhaszn\u00e1l\u00f3n\u00e9v"
+                }
+            },
             "user": {
                 "data": {
                     "password": "Jelsz\u00f3",

homeassistant/components/wallbox/translations/nl.json

@@ -1,8 +1,7 @@
 {
     "config": {
         "abort": {
-            "already_configured": "Apparaat is al geconfigureerd",
+            "already_configured": "Apparaat is al geconfigureerd"
-            "reauth_successful": "Herauthenticatie was succesvol"
         },
         "error": {
             "cannot_connect": "Kan geen verbinding maken",

homeassistant/components/wallbox/translations/ru.json

@@ -1,14 +1,22 @@
 {
     "config": {
         "abort": {
-            "already_configured": "\u042d\u0442\u043e \u0443\u0441\u0442\u0440\u043e\u0439\u0441\u0442\u0432\u043e \u0443\u0436\u0435 \u0434\u043e\u0431\u0430\u0432\u043b\u0435\u043d\u043e \u0432 Home Assistant."
+            "already_configured": "\u042d\u0442\u043e \u0443\u0441\u0442\u0440\u043e\u0439\u0441\u0442\u0432\u043e \u0443\u0436\u0435 \u0434\u043e\u0431\u0430\u0432\u043b\u0435\u043d\u043e \u0432 Home Assistant.",
+            "reauth_successful": "\u041f\u043e\u0432\u0442\u043e\u0440\u043d\u0430\u044f \u0430\u0443\u0442\u0435\u043d\u0442\u0438\u0444\u0438\u043a\u0430\u0446\u0438\u044f \u0432\u044b\u043f\u043e\u043b\u043d\u0435\u043d\u0430 \u0443\u0441\u043f\u0435\u0448\u043d\u043e."
         },
         "error": {
             "cannot_connect": "\u041d\u0435 \u0443\u0434\u0430\u043b\u043e\u0441\u044c \u043f\u043e\u0434\u043a\u043b\u044e\u0447\u0438\u0442\u044c\u0441\u044f.",
             "invalid_auth": "\u041e\u0448\u0438\u0431\u043a\u0430 \u0430\u0443\u0442\u0435\u043d\u0442\u0438\u0444\u0438\u043a\u0430\u0446\u0438\u0438.",
+            "reauth_invalid": "\u041d\u0435 \u0443\u0434\u0430\u043b\u043e\u0441\u044c \u043f\u0440\u043e\u0439\u0442\u0438 \u043f\u043e\u0432\u0442\u043e\u0440\u043d\u0443\u044e \u0430\u0443\u0442\u0435\u043d\u0442\u0438\u0444\u0438\u043a\u0430\u0446\u0438\u044e. \u0421\u0435\u0440\u0438\u0439\u043d\u044b\u0439 \u043d\u043e\u043c\u0435\u0440 \u043d\u0435 \u0441\u043e\u043e\u0442\u0432\u0435\u0442\u0441\u0442\u0432\u0443\u0435\u0442 \u0438\u0441\u0445\u043e\u0434\u043d\u043e\u043c\u0443.",
             "unknown": "\u041d\u0435\u043f\u0440\u0435\u0434\u0432\u0438\u0434\u0435\u043d\u043d\u0430\u044f \u043e\u0448\u0438\u0431\u043a\u0430."
         },
         "step": {
+            "reauth_confirm": {
+                "data": {
+                    "password": "\u041f\u0430\u0440\u043e\u043b\u044c",
+                    "username": "\u0418\u043c\u044f \u043f\u043e\u043b\u044c\u0437\u043e\u0432\u0430\u0442\u0435\u043b\u044f"
+                }
+            },
             "user": {
                 "data": {
                     "password": "\u041f\u0430\u0440\u043e\u043b\u044c",

homeassistant/components/watttime/translations/fr.json

@@ -1,7 +1,30 @@
 {
     "config": {
         "abort": {
-            "already_configured": "L'appareil est d\u00e9j\u00e0 configur\u00e9"
+            "already_configured": "L'appareil est d\u00e9j\u00e0 configur\u00e9",
+            "reauth_successful": "La r\u00e9-authentification a r\u00e9ussi"
+        },
+        "error": {
+            "invalid_auth": "Authentification invalide",
+            "unknown": "Erreur inattendue"
+        },
+        "step": {
+            "coordinates": {
+                "data": {
+                    "longitude": "Longitude"
+                }
+            },
+            "location": {
+                "data": {
+                    "location_type": "Emplacement"
+                }
+            },
+            "reauth_confirm": {
+                "data": {
+                    "password": "Mot de passe"
+                },
+                "title": "R\u00e9-authentifier l'int\u00e9gration"
+            }
         }
     }
 }

homeassistant/components/watttime/translations/id.json

@@ -1,5 +1,13 @@
 {
     "config": {
+        "abort": {
+            "already_configured": "Perangkat sudah dikonfigurasi",
+            "reauth_successful": "Autentikasi ulang berhasil"
+        },
+        "error": {
+            "invalid_auth": "Autentikasi tidak valid",
+            "unknown": "Kesalahan yang tidak diharapkan"
+        },
         "step": {
             "coordinates": {
                 "data": {
@@ -14,6 +22,12 @@
                 },
                 "description": "Pilih lokasi untuk dipantau:"
             },
+            "reauth_confirm": {
+                "data": {
+                    "password": "Kata Sandi"
+                },
+                "title": "Autentikasi Ulang Integrasi"
+            },
             "user": {
                 "data": {
                     "password": "Kata Sandi",

homeassistant/components/whirlpool/translations/fr.json

@@ -0,0 +1,11 @@
+{
+    "config": {
+        "step": {
+            "user": {
+                "data": {
+                    "username": "Nom d'utilisateur"
+                }
+            }
+        }
+    }
+}

homeassistant/components/yeelight/translations/id.json

@@ -29,7 +29,7 @@
         "step": {
             "init": {
                 "data": {
-                    "model": "Model (opsional)",
+                    "model": "Model",
                     "nightlight_switch": "Gunakan Sakelar Lampu Malam",
                     "save_on_change": "Simpan Status Saat Berubah",
                     "transition": "Waktu Transisi (milidetik)",

homeassistant/components/zwave_js/translations/id.json

@@ -27,6 +27,10 @@
             "configure_addon": {
                 "data": {
                     "network_key": "Kunci Jaringan",
+                    "s0_legacy_key": "Kunci S0 (Warisan)",
+                    "s2_access_control_key": "Kunci Kontrol Akses S2",
+                    "s2_authenticated_key": "Kunci Autentikasi S2",
+                    "s2_unauthenticated_key": "Kunci S2 Tidak Diautentikasi",
                     "usb_path": "Jalur Perangkat USB"
                 },
                 "title": "Masukkan konfigurasi add-on Z-Wave JS"
@@ -51,10 +55,21 @@
             },
             "start_addon": {
                 "title": "Add-on Z-Wave JS sedang dimulai."
+            },
+            "usb_confirm": {
+                "description": "Ingin menyiapkan {name} dengan add-on Z-Wave JS?"
             }
         }
     },
     "device_automation": {
+        "action_type": {
+            "clear_lock_usercode": "Hapus usercode pada {entity_name}",
+            "ping": "Ping perangkat",
+            "refresh_value": "Segarkan nilai untuk {entity_name}",
+            "reset_meter": "Setel ulang pengukur di {subtype}",
+            "set_config_parameter": "Tetapkan nilai parameter konfigurasi {subtype}",
+            "set_lock_usercode": "Setel usercode pada {entity_name}"
+        },
         "condition_type": {
             "config_parameter": "Nilai parameter konfigurasi {subtype}",
             "node_status": "Status node",