Fix lingering tasks in KNX tests (#89201)

tests/components/knx/README.md

@@ -69,3 +69,4 @@ Receive some telegrams and assert state.
 - For `payload` in `assert_*` and `receive_*` use `int` for DPT 1, 2 and 3 payload values (DPTBinary) and `tuple` for other DPTs (DPTArray).
 - `await self.hass.async_block_till_done()` is called before `KNXTestKit.assert_*` and after `KNXTestKit.receive_*` so you don't have to explicitly call it.
 - Make sure to assert every outgoing telegram that was created in a test. `assert_no_telegram` is automatically called on teardown.
+- Make sure to `knx.receive_response()` for every Read-request sent form StateUpdater, or to pass its timeout, to not have lingering tasks when finishing the tests.

tests/components/knx/test_climate.py

@@ -10,6 +10,10 @@ from .conftest import KNXTestKit
 
 from tests.common import async_capture_events
 
+RAW_FLOAT_20_0 = (0x07, 0xD0)
+RAW_FLOAT_21_0 = (0x0C, 0x1A)
+RAW_FLOAT_22_0 = (0x0C, 0x4C)
+
 
 async def test_climate_basic_temperature_set(
     hass: HomeAssistant, knx: KNXTestKit
@@ -34,6 +38,10 @@ async def test_climate_basic_temperature_set(
     await knx.assert_read("1/2/3")
     # read target temperature
     await knx.assert_read("1/2/5")
+    # StateUpdater initialize state
+    await knx.receive_response("1/2/3", RAW_FLOAT_21_0)
+    await knx.receive_response("1/2/5", RAW_FLOAT_22_0)
+    events.clear()
 
     # set new temperature
     await hass.services.async_call(
@@ -42,9 +50,8 @@ async def test_climate_basic_temperature_set(
         {"entity_id": "climate.test", "temperature": 20},
         blocking=True,
     )
-    await knx.assert_write("1/2/4", (7, 208))
+    await knx.assert_write("1/2/4", RAW_FLOAT_20_0)
     assert len(events) == 1
-    events.pop()
 
 
 async def test_climate_hvac_mode(hass: HomeAssistant, knx: KNXTestKit) -> None:
@@ -73,11 +80,12 @@ async def test_climate_hvac_mode(hass: HomeAssistant, knx: KNXTestKit) -> None:
     await knx.assert_read("1/2/7")
     await knx.assert_read("1/2/3")
     # StateUpdater initialize state
-    await knx.receive_response("1/2/7", True)
+    await knx.receive_response("1/2/7", (0x01,))
-    await knx.receive_response("1/2/3", (0x21,))
+    await knx.receive_response("1/2/3", RAW_FLOAT_20_0)
     # StateUpdater semaphore allows 2 concurrent requests
     # read target temperature state
     await knx.assert_read("1/2/5")
+    await knx.receive_response("1/2/5", RAW_FLOAT_22_0)
 
     # turn hvac off
     await hass.services.async_call(
@@ -125,11 +133,13 @@ async def test_climate_preset_mode(
     await knx.assert_read("1/2/7")
     await knx.assert_read("1/2/3")
     # StateUpdater initialize state
-    await knx.receive_response("1/2/7", True)
+    await knx.receive_response("1/2/7", (0x01,))
-    await knx.receive_response("1/2/3", (0x01,))
+    await knx.receive_response("1/2/3", RAW_FLOAT_21_0)
     # StateUpdater semaphore allows 2 concurrent requests
     # read target temperature state
     await knx.assert_read("1/2/5")
+    await knx.receive_response("1/2/5", RAW_FLOAT_22_0)
+    events.clear()
 
     # set preset mode
     await hass.services.async_call(
@@ -190,10 +200,11 @@ async def test_update_entity(hass: HomeAssistant, knx: KNXTestKit) -> None:
     await knx.assert_read("1/2/7")
     await knx.assert_read("1/2/3")
     # StateUpdater initialize state
-    await knx.receive_response("1/2/7", True)
+    await knx.receive_response("1/2/7", (0x01,))
-    await knx.receive_response("1/2/3", (0x01,))
+    await knx.receive_response("1/2/3", RAW_FLOAT_21_0)
     # StateUpdater semaphore allows 2 concurrent requests
     await knx.assert_read("1/2/5")
+    await knx.receive_response("1/2/5", RAW_FLOAT_22_0)
 
     # verify update entity retriggers group value reads to the bus
     await hass.services.async_call(
@@ -210,7 +221,6 @@ async def test_update_entity(hass: HomeAssistant, knx: KNXTestKit) -> None:
 
 async def test_command_value_idle_mode(hass: HomeAssistant, knx: KNXTestKit) -> None:
     """Test KNX climate command_value."""
-    events = async_capture_events(hass, "state_changed")
     await knx.setup_integration(
         {
             ClimateSchema.PLATFORM: {
@@ -222,20 +232,17 @@ async def test_command_value_idle_mode(hass: HomeAssistant, knx: KNXTestKit) ->
             }
         }
     )
-    assert len(hass.states.async_all()) == 1
-    assert len(events) == 1
-    events.pop()
 
     await hass.async_block_till_done()
     # read states state updater
     await knx.assert_read("1/2/3")
     await knx.assert_read("1/2/5")
     # StateUpdater initialize state
+    await knx.receive_response("1/2/5", RAW_FLOAT_22_0)
+    await knx.receive_response("1/2/3", RAW_FLOAT_21_0)
+    # StateUpdater semaphore allows 2 concurrent requests
+    await knx.assert_read("1/2/6")
     await knx.receive_response("1/2/6", (0x32,))
-    await knx.receive_response("1/2/3", (0x0C, 0x1A))
-
-    assert len(events) == 2
-    events.pop()
 
     knx.assert_state("climate.test", HVACMode.HEAT, command_value=20)
 

tests/components/knx/test_cover.py

@@ -31,6 +31,10 @@ async def test_cover_basic(hass: HomeAssistant, knx: KNXTestKit) -> None:
     # read position state address and angle state address
     await knx.assert_read("1/0/2")
     await knx.assert_read("1/0/4")
+    # StateUpdater initialize state
+    await knx.receive_response("1/0/2", (0x0F,))
+    await knx.receive_response("1/0/4", (0x30,))
+    events.clear()
 
     # open cover
     await hass.services.async_call(