diff --git a/homeassistant/components/accuweather/translations/et.json b/homeassistant/components/accuweather/translations/et.json
new file mode 100644
index 00000000000..501f55001de
--- /dev/null
+++ b/homeassistant/components/accuweather/translations/et.json
@@ -0,0 +1,35 @@
+{
+    "config": {
+        "abort": {
+            "single_instance_allowed": "Sidumine juba tehtud. V\u00f5imalik on ainult 1 sidumine,"
+        },
+        "error": {
+            "cannot_connect": "\u00dchendus eba\u00f5nnestus",
+            "invalid_api_key": "API v\u00f5ti on vale",
+            "requests_exceeded": "Accuweatheri API-le esitatud taotluste lubatud arv on \u00fcletatud. Peate ootama v\u00f5i muutma API v\u00f5tit."
+        },
+        "step": {
+            "user": {
+                "data": {
+                    "api_key": "API v\u00f5ti",
+                    "latitude": "Laiuskraad",
+                    "longitude": "Pikkuskraad",
+                    "name": "Sidumise nimi"
+                },
+                "description": "Kui vajate seadistamisel abi vaadake siit: https://www.home-assistant.io/integrations/accuweather/ \n\n M\u00f5ni andur pole vaikimisi lubatud. P\u00e4rast sidumise seadistamist saate need \u00fcksused lubada. \n Ilmapennustus pole vaikimisi lubatud. Saate selle lubada sidumise s\u00e4tetes.",
+                "title": "AccuWeather"
+            }
+        }
+    },
+    "options": {
+        "step": {
+            "user": {
+                "data": {
+                    "forecast": "Ilmateade"
+                },
+                "description": "AccuWeather API tasuta versioonis toimub ilmaennustuse lubamisel andmete v\u00e4rskendamine iga 32 minuti asemel iga 64 minuti j\u00e4rel.",
+                "title": "AccuWeatheri valikud"
+            }
+        }
+    }
+}
\ No newline at end of file
diff --git a/homeassistant/components/accuweather/translations/sensor.et.json b/homeassistant/components/accuweather/translations/sensor.et.json
new file mode 100644
index 00000000000..ca58cd9ab6b
--- /dev/null
+++ b/homeassistant/components/accuweather/translations/sensor.et.json
@@ -0,0 +1,9 @@
+{
+    "state": {
+        "accuweather__pressure_tendency": {
+            "falling": "Langev",
+            "rising": "T\u00f5usev",
+            "steady": "\u00dchtlane"
+        }
+    }
+}
\ No newline at end of file
diff --git a/homeassistant/components/airvisual/translations/et.json b/homeassistant/components/airvisual/translations/et.json
new file mode 100644
index 00000000000..5bbc2c47689
--- /dev/null
+++ b/homeassistant/components/airvisual/translations/et.json
@@ -0,0 +1,12 @@
+{
+    "config": {
+        "step": {
+            "geography": {
+                "data": {
+                    "latitude": "Laiuskraad",
+                    "longitude": "Pikkuskraad"
+                }
+            }
+        }
+    }
+}
\ No newline at end of file
diff --git a/homeassistant/components/alarm_control_panel/translations/et.json b/homeassistant/components/alarm_control_panel/translations/et.json
index 28c47b5a06d..cb87bc6ed04 100644
--- a/homeassistant/components/alarm_control_panel/translations/et.json
+++ b/homeassistant/components/alarm_control_panel/translations/et.json
@@ -1,4 +1,19 @@
 {
+    "device_automation": {
+        "action_type": {
+            "arm_away": "Valvesta {entity_name}",
+            "arm_home": "Valvesta {entity_name} kodus re\u017eiimis",
+            "arm_night": "Valvesta {entity_name} \u00f6\u00f6re\u017eiimis",
+            "disarm": "V\u00f5ta {entity_name} valvest maha",
+            "trigger": "K\u00e4ivita {entity_name}"
+        },
+        "trigger_type": {
+            "armed_away": "{entity_name} on valvestatud",
+            "armed_home": "{entity_name} on valvestatud kodure\u017eiimis",
+            "armed_night": "{entity_name} on valvestatud \u00f6\u00f6re\u017eiimis",
+            "disarmed": "{entity_name} v\u00f5eti valvest maha"
+        }
+    },
     "state": {
         "_": {
             "armed": "Valves",
diff --git a/homeassistant/components/alarmdecoder/translations/ko.json b/homeassistant/components/alarmdecoder/translations/ko.json
new file mode 100644
index 00000000000..c4038572ece
--- /dev/null
+++ b/homeassistant/components/alarmdecoder/translations/ko.json
@@ -0,0 +1,74 @@
+{
+    "config": {
+        "abort": {
+            "already_configured": "\uc7a5\uce58\uac00 \uc774\ubbf8 \uad6c\uc131\ub418\uc5b4 \uc788\uc2b5\ub2c8\ub2e4."
+        },
+        "create_entry": {
+            "default": "AlarmDecoder\uc5d0 \uc131\uacf5\uc801\uc73c\ub85c \uc5f0\uacb0\ub418\uc5c8\uc2b5\ub2c8\ub2e4."
+        },
+        "error": {
+            "service_unavailable": "\uc5f0\uacb0 \uc2e4\ud328"
+        },
+        "step": {
+            "protocol": {
+                "data": {
+                    "device_baudrate": "\uc7a5\uce58 \uc804\uc1a1 \uc18d\ub3c4",
+                    "device_path": "\uc7a5\uce58 \uacbd\ub85c",
+                    "host": "\ud638\uc2a4\ud2b8",
+                    "port": "\ud3ec\ud2b8"
+                },
+                "title": "\uc5f0\uacb0 \uc124\uc815 \uad6c\uc131"
+            },
+            "user": {
+                "data": {
+                    "protocol": "\ud504\ub85c\ud1a0\ucf5c"
+                },
+                "title": "AlarmDecoder \ud504\ub85c\ud1a0\ucf5c \uc120\ud0dd"
+            }
+        }
+    },
+    "options": {
+        "error": {
+            "int": "\uc544\ub798 \ud544\ub4dc\ub294 \uc815\uc218\uc5ec\uc57c \ud569\ub2c8\ub2e4.",
+            "loop_range": "RF \ub8e8\ud504\ub294 1\uc5d0\uc11c 4 \uc0ac\uc774\uc758 \uc815\uc218\uc5ec\uc57c \ud569\ub2c8\ub2e4.",
+            "loop_rfid": "RF \ub8e8\ud504\ub294 RF \uc2dc\ub9ac\uc5bc\uc5c6\uc774 \uc0ac\uc6a9\ud560 \uc218 \uc5c6\uc2b5\ub2c8\ub2e4.",
+            "relay_inclusive": "\ub9b4\ub808\uc774 \uc8fc\uc18c\uc640 \ub9b4\ub808\uc774 \ucc44\ub110\uc740 \uc11c\ub85c \uc758\uc874\uc801\uc774\uba70 \ud568\uaed8 \ud3ec\ud568\ub418\uc5b4\uc57c\ud569\ub2c8\ub2e4."
+        },
+        "step": {
+            "arm_settings": {
+                "data": {
+                    "alt_night_mode": "\ub300\uccb4 \uc57c\uac04 \ubaa8\ub4dc",
+                    "auto_bypass": "\uacbd\ube44\uc911 \uc790\ub3d9 \uc6b0\ud68c",
+                    "code_arm_required": "\uacbd\ube44\uc5d0 \ud544\uc694\ud55c \ucf54\ub4dc"
+                },
+                "title": "AlarmDecoder \uad6c\uc131"
+            },
+            "init": {
+                "data": {
+                    "edit_select": "\ud3b8\uc9d1"
+                },
+                "description": "\ubb34\uc5c7\uc744 \ud3b8\uc9d1 \ud558\uc2dc\uaca0\uc2b5\ub2c8\uae4c?",
+                "title": "AlarmDecoder \uad6c\uc131"
+            },
+            "zone_details": {
+                "data": {
+                    "zone_loop": "RF \ub8e8\ud504",
+                    "zone_name": "\uc601\uc5ed \uc774\ub984",
+                    "zone_relayaddr": "\ub9b4\ub808\uc774 \uc8fc\uc18c",
+                    "zone_relaychan": "\ub9b4\ub808\uc774 \ucc44\ub110",
+                    "zone_rfid": "RF \uc2dc\ub9ac\uc5bc",
+                    "zone_type": "\uc601\uc5ed \uc720\ud615"
+                },
+                "description": "{zone_number} \uc601\uc5ed\uc5d0 \ub300\ud55c \uc138\ubd80 \uc815\ubcf4\ub97c \uc785\ub825\ud569\ub2c8\ub2e4. {zone_number} \uc601\uc5ed\uc744 \uc0ad\uc81c\ud558\ub824\uba74 \uc601\uc5ed \uc774\ub984\uc744 \ube44\uc6cc \ub461\ub2c8\ub2e4.",
+                "title": "AlarmDecoder \uad6c\uc131"
+            },
+            "zone_select": {
+                "data": {
+                    "zone_number": "\uad6c\uc5ed \ubc88\ud638"
+                },
+                "description": "\ucd94\uac00, \ud3b8\uc9d1 \ub610\ub294 \uc81c\uac70\ud560 \uc601\uc5ed \ubc88\ud638\ub97c \uc785\ub825\ud569\ub2c8\ub2e4.",
+                "title": "AlarmDecoder \uad6c\uc131"
+            }
+        }
+    }
+}
\ No newline at end of file
diff --git a/homeassistant/components/almond/translations/ko.json b/homeassistant/components/almond/translations/ko.json
index 645eaafab08..cb1f53882f8 100644
--- a/homeassistant/components/almond/translations/ko.json
+++ b/homeassistant/components/almond/translations/ko.json
@@ -3,7 +3,8 @@
         "abort": {
             "already_setup": "\ud558\ub098\uc758 Almond \uacc4\uc815\ub9cc \uad6c\uc131\ud560 \uc218 \uc788\uc2b5\ub2c8\ub2e4.",
             "cannot_connect": "Almond \uc11c\ubc84\uc5d0 \uc5f0\uacb0\ud560 \uc218 \uc5c6\uc2b5\ub2c8\ub2e4.",
-            "missing_configuration": "Almond \uc124\uc815 \ubc29\ubc95\uc5d0 \ub300\ud55c \uc124\uba85\uc11c\ub97c \ud655\uc778\ud574\uc8fc\uc138\uc694."
+            "missing_configuration": "Almond \uc124\uc815 \ubc29\ubc95\uc5d0 \ub300\ud55c \uc124\uba85\uc11c\ub97c \ud655\uc778\ud574\uc8fc\uc138\uc694.",
+            "no_url_available": "\uac00\ub2a5\ud55c URL\uc774 \uc5c6\uc2b5\ub2c8\ub2e4. \uc774 \uc5d0\ub7ec\uc5d0 \ub300\ud55c \uc815\ubcf4\ub294 \ub3c4\uc6b0\ub9d0 \uc139\uc158\uc744 \ud655\uc778\ud558\uc138\uc694({docs_url})"
         },
         "step": {
             "hassio_confirm": {
diff --git a/homeassistant/components/august/translations/ko.json b/homeassistant/components/august/translations/ko.json
index 52f939c45a0..c11bc55ec40 100644
--- a/homeassistant/components/august/translations/ko.json
+++ b/homeassistant/components/august/translations/ko.json
@@ -1,7 +1,8 @@
 {
     "config": {
         "abort": {
-            "already_configured": "\uacc4\uc815\uc774 \uc774\ubbf8 \uad6c\uc131\ub418\uc5c8\uc2b5\ub2c8\ub2e4."
+            "already_configured": "\uacc4\uc815\uc774 \uc774\ubbf8 \uad6c\uc131\ub418\uc5c8\uc2b5\ub2c8\ub2e4.",
+            "reauth_successful": "\uc7ac\uc778\uc99d\uc774 \uc131\uacf5\ud588\uc2b5\ub2c8\ub2e4."
         },
         "error": {
             "cannot_connect": "\uc5f0\uacb0\ud558\uc9c0 \ubabb\ud588\uc2b5\ub2c8\ub2e4. \ub2e4\uc2dc \uc2dc\ub3c4\ud574\uc8fc\uc138\uc694.",
diff --git a/homeassistant/components/binary_sensor/translations/et.json b/homeassistant/components/binary_sensor/translations/et.json
index d6ea4dbbe7d..c074c56675a 100644
--- a/homeassistant/components/binary_sensor/translations/et.json
+++ b/homeassistant/components/binary_sensor/translations/et.json
@@ -78,7 +78,15 @@
             "occupied": "{entity_name} h\u00f5ivati",
             "opened": "{entity_name} avanes",
             "plugged_in": "{entity_name} \u00fchendati",
-            "powered": "{entity_name} l\u00fcltus voolu alla"
+            "powered": "{entity_name} l\u00fcltus voolu alla",
+            "present": "{entity_name} on saadaval",
+            "problem": "{entity_name} avastas probleemi",
+            "smoke": "{entity_name} tuvastas suitsu",
+            "sound": "{entity_name} tuvastas heli",
+            "turned_off": "{entity_name} l\u00fclitus v\u00e4lja",
+            "turned_on": "{entity_name} l\u00fclitus sisse",
+            "unsafe": "{entity_name} on ebaturvaline",
+            "vibration": "{entity_name} registreeris vibratsiooni"
         }
     },
     "state": {
diff --git a/homeassistant/components/broadlink/translations/ko.json b/homeassistant/components/broadlink/translations/ko.json
new file mode 100644
index 00000000000..a3121d0b7de
--- /dev/null
+++ b/homeassistant/components/broadlink/translations/ko.json
@@ -0,0 +1,7 @@
+{
+    "config": {
+        "abort": {
+            "not_supported": "\uc9c0\uc6d0\ub418\uc9c0 \uc54a\ub294 \uc7a5\uce58"
+        }
+    }
+}
\ No newline at end of file
diff --git a/homeassistant/components/brother/translations/et.json b/homeassistant/components/brother/translations/et.json
new file mode 100644
index 00000000000..4c5bb032f0b
--- /dev/null
+++ b/homeassistant/components/brother/translations/et.json
@@ -0,0 +1,29 @@
+{
+    "config": {
+        "abort": {
+            "unsupported_model": "Seda printeri mudelit ei toetata."
+        },
+        "error": {
+            "connection_error": "\u00dchenduse t\u00f5rge.",
+            "snmp_error": "SNMP-server on v\u00e4lja l\u00fclitatud v\u00f5i printerit ei toetata.",
+            "wrong_host": "Sobimatu hostinimi v\u00f5i IP-aadress."
+        },
+        "flow_title": "Brotheri printer: {model} {serial_number}",
+        "step": {
+            "user": {
+                "data": {
+                    "host": "Host",
+                    "type": "Printeri t\u00fc\u00fcp"
+                },
+                "description": "Seadistage Brotheri printeri sidumine. Kui teil on seadistamisega probleeme minge aadressile https://www.home-assistant.io/integrations/brother"
+            },
+            "zeroconf_confirm": {
+                "data": {
+                    "type": "Printeri t\u00fc\u00fcp"
+                },
+                "description": "Kas soovite lisada Home Assistanti Brotheri printeri {model} seerianumbriga \" {serial_number} \"?",
+                "title": "Avastatud Brotheri printer"
+            }
+        }
+    }
+}
\ No newline at end of file
diff --git a/homeassistant/components/canary/translations/ko.json b/homeassistant/components/canary/translations/ko.json
new file mode 100644
index 00000000000..3a68ce2da6c
--- /dev/null
+++ b/homeassistant/components/canary/translations/ko.json
@@ -0,0 +1,30 @@
+{
+    "config": {
+        "abort": {
+            "single_instance_allowed": "\uc774\ubbf8 \uc124\uc815\ub418\uc5b4 \uc788\uc74c. \ud558\ub098\uc758 \uc124\uc815\ub9cc \uac00\ub2a5\ud568.",
+            "unknown": "\uc608\uc0c1\uce58 \ubabb\ud55c \uc5d0\ub7ec \ubc1c\uc0dd"
+        },
+        "error": {
+            "cannot_connect": "\uc5f0\uacb0 \uc2e4\ud328"
+        },
+        "step": {
+            "user": {
+                "data": {
+                    "password": "\uc554\ud638",
+                    "username": "\uc0ac\uc6a9\uc790\uba85"
+                },
+                "title": "Canary\uc5d0 \uc5f0\uacb0"
+            }
+        }
+    },
+    "options": {
+        "step": {
+            "init": {
+                "data": {
+                    "ffmpeg_arguments": "\uce74\uba54\ub77c ffmpeg\uc5d0 \uc804\ub2ec \ub41c \uc778\uc218",
+                    "timeout": "\uc694\uccad \uc81c\ud55c \uc2dc\uac04 (\ucd08)"
+                }
+            }
+        }
+    }
+}
\ No newline at end of file
diff --git a/homeassistant/components/cast/translations/et.json b/homeassistant/components/cast/translations/et.json
new file mode 100644
index 00000000000..05287b5a52b
--- /dev/null
+++ b/homeassistant/components/cast/translations/et.json
@@ -0,0 +1,13 @@
+{
+    "config": {
+        "abort": {
+            "no_devices_found": "V\u00f5rgust ei leitud \u00fchtegi Google Casti seadet.",
+            "single_instance_allowed": "Vajalik on ainult \u00fcks Google Casti konfiguratsioon."
+        },
+        "step": {
+            "confirm": {
+                "description": "Kas soovid seadistada Google Casti?"
+            }
+        }
+    }
+}
\ No newline at end of file
diff --git a/homeassistant/components/climate/translations/et.json b/homeassistant/components/climate/translations/et.json
index 4cba2fc5e41..7be57f4cdaa 100644
--- a/homeassistant/components/climate/translations/et.json
+++ b/homeassistant/components/climate/translations/et.json
@@ -25,5 +25,5 @@
             "off": "V\u00e4ljas"
         }
     },
-    "title": "Kliima"
+    "title": "Kliimaseade"
 }
\ No newline at end of file
diff --git a/homeassistant/components/coronavirus/translations/et.json b/homeassistant/components/coronavirus/translations/et.json
new file mode 100644
index 00000000000..a69b845e623
--- /dev/null
+++ b/homeassistant/components/coronavirus/translations/et.json
@@ -0,0 +1,15 @@
+{
+    "config": {
+        "abort": {
+            "already_configured": "See riik on juba seadistatud."
+        },
+        "step": {
+            "user": {
+                "data": {
+                    "country": "Riik"
+                },
+                "title": "Vali j\u00e4lgiv riik"
+            }
+        }
+    }
+}
\ No newline at end of file
diff --git a/homeassistant/components/cover/translations/et.json b/homeassistant/components/cover/translations/et.json
index 2c9ff745720..8b48976a9e7 100644
--- a/homeassistant/components/cover/translations/et.json
+++ b/homeassistant/components/cover/translations/et.json
@@ -26,5 +26,5 @@
             "stopped": "Peatatud"
         }
     },
-    "title": "Kate"
+    "title": "Kardin"
 }
\ No newline at end of file
diff --git a/homeassistant/components/dialogflow/translations/et.json b/homeassistant/components/dialogflow/translations/et.json
new file mode 100644
index 00000000000..99298014f71
--- /dev/null
+++ b/homeassistant/components/dialogflow/translations/et.json
@@ -0,0 +1,17 @@
+{
+    "config": {
+        "abort": {
+            "not_internet_accessible": "Dialogflow teavituste vastuv\u00f5tmiseks peab teie Home Assistant olema Interneti kaudu ligip\u00e4\u00e4setav.",
+            "one_instance_allowed": "Vaja on ainult \u00fchte \u00fcksust."
+        },
+        "create_entry": {
+            "default": "S\u00fcndmuste saatmiseks Home Assistantile peate seadistama [Dialogflow'i veebihaagii integreerimine] ( {dialogflow_url} ). \n\n Sisestage j\u00e4rgmine teave: \n\n - URL: \" {webhook_url} \" \n - Meetod: POST \n - Sisu t\u00fc\u00fcp: rakendus / json \n\n Lisateavet leiate [dokumentatsioonist] ( {docs_url} )."
+        },
+        "step": {
+            "user": {
+                "description": "Kas oled kindel, et soovid seadistada Dialogflow?",
+                "title": "Seadistage Dialogflow veebihaak"
+            }
+        }
+    }
+}
\ No newline at end of file
diff --git a/homeassistant/components/dsmr/translations/ko.json b/homeassistant/components/dsmr/translations/ko.json
new file mode 100644
index 00000000000..9c8fbbe80a9
--- /dev/null
+++ b/homeassistant/components/dsmr/translations/ko.json
@@ -0,0 +1,7 @@
+{
+    "config": {
+        "abort": {
+            "already_configured": "\uc7a5\uce58\ub294 \uc774\ubbf8 \uad6c\uc131\ub418\uc5b4 \uc788\uc2b5\ub2c8\ub2e4."
+        }
+    }
+}
\ No newline at end of file
diff --git a/homeassistant/components/emulated_roku/translations/et.json b/homeassistant/components/emulated_roku/translations/et.json
index b94548b44af..cc4dd04a9ea 100644
--- a/homeassistant/components/emulated_roku/translations/et.json
+++ b/homeassistant/components/emulated_roku/translations/et.json
@@ -4,7 +4,8 @@
             "user": {
                 "data": {
                     "host_ip": "",
-                    "name": "Nimi"
+                    "name": "Nimi",
+                    "upnp_bind_multicast": "Seo multicast (jah/ei)"
                 }
             }
         }
diff --git a/homeassistant/components/home_connect/translations/ko.json b/homeassistant/components/home_connect/translations/ko.json
index 973e1a0ec88..2b8e0c0af0f 100644
--- a/homeassistant/components/home_connect/translations/ko.json
+++ b/homeassistant/components/home_connect/translations/ko.json
@@ -1,7 +1,8 @@
 {
     "config": {
         "abort": {
-            "missing_configuration": "Home Connect \uad6c\uc131\uc694\uc18c\uac00 \uad6c\uc131\ub418\uc9c0 \uc54a\uc558\uc2b5\ub2c8\ub2e4. \uc124\uba85\uc11c\ub97c \ucc38\uace0\ud574\uc8fc\uc138\uc694."
+            "missing_configuration": "Home Connect \uad6c\uc131\uc694\uc18c\uac00 \uad6c\uc131\ub418\uc9c0 \uc54a\uc558\uc2b5\ub2c8\ub2e4. \uc124\uba85\uc11c\ub97c \ucc38\uace0\ud574\uc8fc\uc138\uc694.",
+            "no_url_available": "\uac00\ub2a5\ud55c URL\uc774 \uc5c6\uc2b5\ub2c8\ub2e4. \uc774 \uc5d0\ub7ec\uc5d0 \ub300\ud55c \uc815\ubcf4\ub294 \ub3c4\uc6b0\ub9d0 \uc139\uc158\uc744 \ud655\uc778\ud558\uc138\uc694({docs_url})"
         },
         "create_entry": {
             "default": "Home Connect \ub85c \uc131\uacf5\uc801\uc73c\ub85c \uc778\uc99d\ub418\uc5c8\uc2b5\ub2c8\ub2e4."
diff --git a/homeassistant/components/homekit_controller/translations/ko.json b/homeassistant/components/homekit_controller/translations/ko.json
index 55c5ee0053d..a70a6269bb6 100644
--- a/homeassistant/components/homekit_controller/translations/ko.json
+++ b/homeassistant/components/homekit_controller/translations/ko.json
@@ -7,6 +7,7 @@
             "already_paired": "\uc774 \uc561\uc138\uc11c\ub9ac\ub294 \uc774\ubbf8 \ub2e4\ub978 \uae30\uae30\uc640 \ud398\uc5b4\ub9c1\ub418\uc5b4 \uc788\uc2b5\ub2c8\ub2e4. \uc561\uc138\uc11c\ub9ac\ub97c \uc7ac\uc124\uc815\ud558\uace0 \ub2e4\uc2dc \uc2dc\ub3c4\ud574\uc8fc\uc138\uc694.",
             "ignored_model": "\uc774 \ubaa8\ub378\uc5d0 \ub300\ud55c HomeKit \uc9c0\uc6d0\uc740 \ub354 \ub9ce\uc740 \uae30\ub2a5\uc744 \uc81c\uacf5\ud558\ub294 \uae30\ubcf8 \uad6c\uc131\uc694\uc18c\ub85c \uc778\ud574 \ucc28\ub2e8\ub418\uc5c8\uc2b5\ub2c8\ub2e4.",
             "invalid_config_entry": "\uc774 \uae30\uae30\ub294 \ud398\uc5b4\ub9c1 \ud560 \uc900\ube44\uac00 \ub418\uc5c8\uc9c0\ub9cc Home Assistant \uc5d0 \uc774\ubbf8 \uad6c\uc131\ub418\uc5b4 \ucda9\ub3cc\ud558\ub294 \uad6c\uc131\uc694\uc18c\uac00 \uc788\uc2b5\ub2c8\ub2e4. \uba3c\uc800 \ud574\ub2f9 \uad6c\uc131\uc694\uc18c\ub97c \uc81c\uac70\ud574\uc8fc\uc138\uc694.",
+            "invalid_properties": "\uc7a5\uce58\uc5d0\uc11c\uc120\uc5b8\ud55c \uc798\ubabb\ub41c \uc18d\uc131\uc785\ub2c8\ub2e4.",
             "no_devices": "\ud398\uc5b4\ub9c1\uc774 \ud544\uc694\ud55c \uae30\uae30\ub97c \ucc3e\uc744 \uc218 \uc5c6\uc2b5\ub2c8\ub2e4"
         },
         "error": {
@@ -48,5 +49,25 @@
             }
         }
     },
+    "device_automation": {
+        "trigger_subtype": {
+            "button1": "\ubc84\ud2bc 1",
+            "button10": "\ubc84\ud2bc 10",
+            "button2": "\ubc84\ud2bc 2",
+            "button3": "\ubc84\ud2bc 3",
+            "button4": "\ubc84\ud2bc 4",
+            "button5": "\ubc84\ud2bc 5",
+            "button6": "\ubc84\ud2bc 6",
+            "button7": "\ubc84\ud2bc 7",
+            "button8": "\ubc84\ud2bc 8",
+            "button9": "\ubc84\ud2bc 9",
+            "doorbell": "\ucd08\uc778\uc885"
+        },
+        "trigger_type": {
+            "double_press": "\" {subtype} \"\uc744 \ub450\ubc88 \ub204\ub984",
+            "long_press": "\" {subtype} \"\uc744 \uae38\uac8c \ub204\ub984",
+            "single_press": "\"{subtype}\" \uc744 \ud55c\ubc88 \ub204\ub984"
+        }
+    },
     "title": "HomeKit \ucee8\ud2b8\ub864\ub7ec"
 }
\ No newline at end of file
diff --git a/homeassistant/components/homematicip_cloud/translations/ko.json b/homeassistant/components/homematicip_cloud/translations/ko.json
index b85b8ac00b1..962faa68066 100644
--- a/homeassistant/components/homematicip_cloud/translations/ko.json
+++ b/homeassistant/components/homematicip_cloud/translations/ko.json
@@ -6,6 +6,7 @@
             "unknown": "\uc54c \uc218 \uc5c6\ub294 \uc624\ub958\uac00 \ubc1c\uc0dd\ud588\uc2b5\ub2c8\ub2e4"
         },
         "error": {
+            "invalid_pin": "\uc798\ubabb\ub41c PIN\uc785\ub2c8\ub2e4. \ub2e4\uc2dc \uc2dc\ub3c4\ud558\uc2ed\uc2dc\uc624.",
             "invalid_sgtin_or_pin": "PIN\uc774 \uc798\ubabb\ub418\uc5c8\uc2b5\ub2c8\ub2e4. \ub2e4\uc2dc \uc2dc\ub3c4\ud574\uc8fc\uc138\uc694.",
             "press_the_button": "\ud30c\ub780\uc0c9 \ubc84\ud2bc\uc744 \ub20c\ub7ec\uc8fc\uc138\uc694.",
             "register_failed": "\ub4f1\ub85d\uc5d0 \uc2e4\ud328\ud558\uc600\uc2b5\ub2c8\ub2e4. \ub2e4\uc2dc \uc2dc\ub3c4\ud574\uc8fc\uc138\uc694.",
diff --git a/homeassistant/components/input_boolean/translations/et.json b/homeassistant/components/input_boolean/translations/et.json
index 3edfbf3cb5d..e0b2d46b168 100644
--- a/homeassistant/components/input_boolean/translations/et.json
+++ b/homeassistant/components/input_boolean/translations/et.json
@@ -5,5 +5,5 @@
             "on": "Sees"
         }
     },
-    "title": "Sisesta t\u00f5ev\u00e4\u00e4rtus"
+    "title": "T\u00f5ev\u00e4\u00e4rtuse abiline"
 }
\ No newline at end of file
diff --git a/homeassistant/components/input_datetime/translations/et.json b/homeassistant/components/input_datetime/translations/et.json
index e72e7b10288..83acbf89262 100644
--- a/homeassistant/components/input_datetime/translations/et.json
+++ b/homeassistant/components/input_datetime/translations/et.json
@@ -1,3 +1,3 @@
 {
-    "title": "Sisesta kuup\u00e4ev ja kellaaeg"
+    "title": "Kuup\u00e4eva ja kellaaja abiline"
 }
\ No newline at end of file
diff --git a/homeassistant/components/input_number/translations/et.json b/homeassistant/components/input_number/translations/et.json
index f4182fbb3d5..a241a89ff53 100644
--- a/homeassistant/components/input_number/translations/et.json
+++ b/homeassistant/components/input_number/translations/et.json
@@ -1,3 +1,3 @@
 {
-    "title": "Sisendi number"
+    "title": "Arvv\u00e4\u00e4rtuse abiline"
 }
\ No newline at end of file
diff --git a/homeassistant/components/input_select/translations/et.json b/homeassistant/components/input_select/translations/et.json
index 22378cd35a0..5cce5f5ce0b 100644
--- a/homeassistant/components/input_select/translations/et.json
+++ b/homeassistant/components/input_select/translations/et.json
@@ -1,3 +1,3 @@
 {
-    "title": "Vali sisend"
+    "title": "Valikmen\u00fc\u00fc abiline"
 }
\ No newline at end of file
diff --git a/homeassistant/components/input_text/translations/et.json b/homeassistant/components/input_text/translations/et.json
index 047874d6328..42d7d57f419 100644
--- a/homeassistant/components/input_text/translations/et.json
+++ b/homeassistant/components/input_text/translations/et.json
@@ -1,3 +1,3 @@
 {
-    "title": "Teksti sisestamine"
+    "title": "Tekstisisestuse abiline"
 }
\ No newline at end of file
diff --git a/homeassistant/components/insteon/translations/ko.json b/homeassistant/components/insteon/translations/ko.json
new file mode 100644
index 00000000000..37b62b95cdc
--- /dev/null
+++ b/homeassistant/components/insteon/translations/ko.json
@@ -0,0 +1,34 @@
+{
+    "config": {
+        "abort": {
+            "single_instance_allowed": "\uc774\ubbf8 \uad6c\uc131\ub428. \ud558\ub098\uc758 \uad6c\uc131\ub9cc \uac00\ub2a5\ud569\ub2c8\ub2e4."
+        },
+        "step": {
+            "hubv1": {
+                "data": {
+                    "host": "IP \uc8fc\uc18c",
+                    "port": "\ud3ec\ud2b8"
+                },
+                "description": "Insteon Hub \ubc84\uc804 1 (2014 \ub144 \uc774\uc804)\uc744 \uad6c\uc131\ud569\ub2c8\ub2e4.",
+                "title": "Insteon Hub \ubc84\uc804 1"
+            },
+            "hubv2": {
+                "data": {
+                    "host": "IP \uc8fc\uc18c",
+                    "password": "\uc554\ud638",
+                    "port": "\ud3ec\ud2b8",
+                    "username": "\uc0ac\uc6a9\uc790\uba85"
+                },
+                "description": "Insteon Hub \ubc84\uc804 2\ub97c \uad6c\uc131\ud569\ub2c8\ub2e4.",
+                "title": "Insteon Hub \ubc84\uc804 2"
+            },
+            "user": {
+                "data": {
+                    "modem_type": "\ubaa8\ub380 \uc720\ud615."
+                },
+                "description": "Insteon \ubaa8\ub380 \uc720\ud615\uc744 \uc120\ud0dd\ud558\uc2ed\uc2dc\uc624.",
+                "title": "Insteon"
+            }
+        }
+    }
+}
\ No newline at end of file
diff --git a/homeassistant/components/ipp/translations/et.json b/homeassistant/components/ipp/translations/et.json
new file mode 100644
index 00000000000..44e9fc8218f
--- /dev/null
+++ b/homeassistant/components/ipp/translations/et.json
@@ -0,0 +1,35 @@
+{
+    "config": {
+        "abort": {
+            "already_configured": "Seade on juba seadistatud",
+            "connection_error": "\u00dchendumine eba\u00f5nnestus",
+            "connection_upgrade": "Printeriga \u00fchenduse loomine eba\u00f5nnestus kuna \u00fchenduse uuendamine on vajalik.",
+            "ipp_error": "Ilmnes IPP viga.",
+            "ipp_version_error": "Printer ei toeta seda IPP versiooni.",
+            "parse_error": "Printeri vastuse s\u00f5elumine nurjus.",
+            "unique_id_required": "Seadmel puudub avastamiseks vajalik kordumatu ID."
+        },
+        "error": {
+            "connection_error": "\u00dchendumine eba\u00f5nnestus",
+            "connection_upgrade": "Printeriga \u00fchenduse loomine nurjus. Proovige uuesti kui SSL/TLS-i suvand on m\u00e4rgitud."
+        },
+        "flow_title": "Printer: {name}",
+        "step": {
+            "user": {
+                "data": {
+                    "base_path": "Printeri suhteline rada",
+                    "host": "Host",
+                    "port": "Port",
+                    "ssl": "Printer toetab SSL/TLS \u00fchendust",
+                    "verify_ssl": "Printer kasutab \u00f5iget SSL-serti"
+                },
+                "description": "Seadistage oma printer Interneti-printimisprotokolli (IPP) kaudu, et see integreeruks Home Assistantiga.",
+                "title": "Linkige oma printer"
+            },
+            "zeroconf_confirm": {
+                "description": "Kas soovite seadistada {name}?",
+                "title": "Avastatud printer"
+            }
+        }
+    }
+}
\ No newline at end of file
diff --git a/homeassistant/components/light/translations/et.json b/homeassistant/components/light/translations/et.json
index 4eef7a85267..59e0b904637 100644
--- a/homeassistant/components/light/translations/et.json
+++ b/homeassistant/components/light/translations/et.json
@@ -1,4 +1,19 @@
 {
+    "device_automation": {
+        "action_type": {
+            "toggle": "Muuda {entity_name} olekut",
+            "turn_off": "L\u00fclita {entity_name} v\u00e4lja",
+            "turn_on": "L\u00fclita {entity_name} sisse"
+        },
+        "condition_type": {
+            "is_off": "{entity_name} on v\u00e4lja l\u00fclitatud",
+            "is_on": "{entity_name} on sisse l\u00fclitatud"
+        },
+        "trigger_type": {
+            "turned_off": "{entity_name} l\u00fclitus v\u00e4lja",
+            "turned_on": "{entity_name} l\u00fclitus sisse"
+        }
+    },
     "state": {
         "_": {
             "off": "V\u00e4ljas",
diff --git a/homeassistant/components/local_ip/translations/et.json b/homeassistant/components/local_ip/translations/et.json
new file mode 100644
index 00000000000..70493aee468
--- /dev/null
+++ b/homeassistant/components/local_ip/translations/et.json
@@ -0,0 +1,13 @@
+{
+    "config": {
+        "step": {
+            "user": {
+                "data": {
+                    "name": "Anduri nimi"
+                },
+                "title": "Kohalik IP-aadress"
+            }
+        }
+    },
+    "title": "Kohalik IP-aadress"
+}
\ No newline at end of file
diff --git a/homeassistant/components/lock/translations/et.json b/homeassistant/components/lock/translations/et.json
index 67aeb442937..1ebf7e1e6dd 100644
--- a/homeassistant/components/lock/translations/et.json
+++ b/homeassistant/components/lock/translations/et.json
@@ -1,5 +1,10 @@
 {
     "device_automation": {
+        "action_type": {
+            "lock": "Lukusta {entity_name}",
+            "open": "Ava {entity_name}",
+            "unlock": "Tee {entity_name} lahti"
+        },
         "condition_type": {
             "is_locked": "{entity_name} on lukus",
             "is_unlocked": "{entity_name} on lukustamata"
diff --git a/homeassistant/components/mobile_app/translations/et.json b/homeassistant/components/mobile_app/translations/et.json
new file mode 100644
index 00000000000..e5c01546976
--- /dev/null
+++ b/homeassistant/components/mobile_app/translations/et.json
@@ -0,0 +1,12 @@
+{
+    "config": {
+        "abort": {
+            "install_app": "Home Assistantiga sidumiseks avage mobiilirakendus. \u00dchilduvate rakenduste loendi leiate jaotisest [dokumendid] ( {apps_url} )."
+        },
+        "step": {
+            "confirm": {
+                "description": "Kas soovid seadistada mobiilirakenduse sidumist?"
+            }
+        }
+    }
+}
\ No newline at end of file
diff --git a/homeassistant/components/moon/translations/sensor.et.json b/homeassistant/components/moon/translations/sensor.et.json
new file mode 100644
index 00000000000..926e20adbb4
--- /dev/null
+++ b/homeassistant/components/moon/translations/sensor.et.json
@@ -0,0 +1,14 @@
+{
+    "state": {
+        "moon__phase": {
+            "first_quarter": "Kasvav poolkuu",
+            "full_moon": "T\u00e4iskuu",
+            "last_quarter": "Kahanev poolkuu",
+            "new_moon": "Kuu loomine",
+            "waning_crescent": "Kahanev kuu",
+            "waning_gibbous": "Kahanev kuu",
+            "waxing_crescent": "Noorkuu",
+            "waxing_gibbous": "Kasvav kuu"
+        }
+    }
+}
\ No newline at end of file
diff --git a/homeassistant/components/mqtt/translations/et.json b/homeassistant/components/mqtt/translations/et.json
new file mode 100644
index 00000000000..78e88cdc854
--- /dev/null
+++ b/homeassistant/components/mqtt/translations/et.json
@@ -0,0 +1,85 @@
+{
+    "config": {
+        "abort": {
+            "single_instance_allowed": "Lubatud on ainult \u00fcks MQTT konfiguratsioon."
+        },
+        "error": {
+            "cannot_connect": "Vahendajaga ei saa \u00fchendust luua."
+        },
+        "step": {
+            "broker": {
+                "data": {
+                    "broker": "Vahendaja",
+                    "discovery": "Luba automaatne avastamine",
+                    "password": "Salas\u00f5na",
+                    "port": "Port",
+                    "username": "Kasutajanimi"
+                },
+                "description": "Sisestage oma MQTT vahendaja andmed."
+            },
+            "hassio_confirm": {
+                "data": {
+                    "discovery": "Luba automaatne avastamine"
+                },
+                "description": "Kas soovite seadistada Home Assistanti \u00fchenduse loomiseks Hass.io lisandmooduli {addon} pakutava MQTT vahendajaga?",
+                "title": "MQTT vahendaja Hass.io pistikprogrammi kaudu"
+            }
+        }
+    },
+    "device_automation": {
+        "trigger_subtype": {
+            "button_1": "Esimene nupp",
+            "button_2": "Teine nupp",
+            "button_3": "Kolmas nupp",
+            "button_4": "Neljas nupp",
+            "button_5": "Viies nupp",
+            "button_6": "Kuues nupp",
+            "turn_off": "L\u00fclita v\u00e4lja",
+            "turn_on": "L\u00fclita sisse"
+        },
+        "trigger_type": {
+            "button_double_press": "\" {subtype} \" on topeltkl\u00f5psatud",
+            "button_long_press": "\" {subtype} \" on pikalt alla vajutatud",
+            "button_long_release": "\"{alamt\u00fc\u00fcp}\" vabastatati p\u00e4rast pikka vajutust",
+            "button_quadruple_press": "\"{alamt\u00fc\u00fcp}\" on neljakordselt kl\u00f5psatud",
+            "button_quintuple_press": "\"{alamt\u00fc\u00fcp}\" on viiekordselt kl\u00f5psatud",
+            "button_short_press": "\u201e {subtype} \u201d on vajutatud",
+            "button_short_release": "\" {subtype} \" vabastati",
+            "button_triple_press": "\"{alamt\u00fc\u00fcp}\" on kolmekordselt kl\u00f5psatud"
+        }
+    },
+    "options": {
+        "error": {
+            "bad_birth": "Kehtetu loomise teavitus.",
+            "bad_will": "Kehtetu l\u00f5petamise teavitus.",
+            "cannot_connect": "Vahendajaga ei saa \u00fchendust luua."
+        },
+        "step": {
+            "broker": {
+                "data": {
+                    "broker": "Vahendaja",
+                    "password": "Salas\u00f5na",
+                    "port": "Port",
+                    "username": "Kasutajanimi"
+                },
+                "description": "Sisestage oma MQTT vahendaja \u00fchenduse teave."
+            },
+            "options": {
+                "data": {
+                    "birth_enable": "Luba loomisteavitus",
+                    "birth_payload": "S\u00fcnniteate v\u00e4\u00e4rtus",
+                    "birth_qos": "S\u00fcnniteate QoS",
+                    "birth_retain": "S\u00fcnniteate j\u00e4\u00e4dvustamine",
+                    "birth_topic": "S\u00fcnniteate teema",
+                    "discovery": "Luba avastamine",
+                    "will_enable": "Luba loomisteavitus",
+                    "will_payload": "L\u00f5petamisteate v\u00e4\u00e4rtus",
+                    "will_qos": "L\u00f5petamisteate QoS",
+                    "will_retain": "L\u00f5petamisteate j\u00e4\u00e4dvustamine",
+                    "will_topic": "L\u00f5petamisteade"
+                },
+                "description": "Valige MQTT s\u00e4tted."
+            }
+        }
+    }
+}
\ No newline at end of file
diff --git a/homeassistant/components/netatmo/translations/ko.json b/homeassistant/components/netatmo/translations/ko.json
index f8c052bd5f8..1793e0a765a 100644
--- a/homeassistant/components/netatmo/translations/ko.json
+++ b/homeassistant/components/netatmo/translations/ko.json
@@ -2,7 +2,8 @@
     "config": {
         "abort": {
             "authorize_url_timeout": "\uc778\uc99d URL \uc0dd\uc131 \uc2dc\uac04\uc774 \ucd08\uacfc\ub418\uc5c8\uc2b5\ub2c8\ub2e4.",
-            "missing_configuration": "\uad6c\uc131\uc694\uc18c\uac00 \uad6c\uc131\ub418\uc9c0 \uc54a\uc558\uc2b5\ub2c8\ub2e4. \uc124\uba85\uc11c\ub97c \ucc38\uace0\ud574\uc8fc\uc138\uc694."
+            "missing_configuration": "\uad6c\uc131\uc694\uc18c\uac00 \uad6c\uc131\ub418\uc9c0 \uc54a\uc558\uc2b5\ub2c8\ub2e4. \uc124\uba85\uc11c\ub97c \ucc38\uace0\ud574\uc8fc\uc138\uc694.",
+            "no_url_available": "\uac00\ub2a5\ud55c URL\uc774 \uc5c6\uc2b5\ub2c8\ub2e4. \uc774 \uc5d0\ub7ec\uc5d0 \ub300\ud55c \uc815\ubcf4\ub294 \ub3c4\uc6b0\ub9d0 \uc139\uc158\uc744 \ud655\uc778\ud558\uc138\uc694({docs_url})"
         },
         "create_entry": {
             "default": "\uc131\uacf5\uc801\uc73c\ub85c \uc778\uc99d\ub418\uc5c8\uc2b5\ub2c8\ub2e4"
diff --git a/homeassistant/components/notify/translations/et.json b/homeassistant/components/notify/translations/et.json
index d2c08643c06..798972fe384 100644
--- a/homeassistant/components/notify/translations/et.json
+++ b/homeassistant/components/notify/translations/et.json
@@ -1,3 +1,3 @@
 {
-    "title": "Teata"
+    "title": "Teavitused"
 }
\ No newline at end of file
diff --git a/homeassistant/components/nzbget/translations/ko.json b/homeassistant/components/nzbget/translations/ko.json
new file mode 100644
index 00000000000..ea9108b9367
--- /dev/null
+++ b/homeassistant/components/nzbget/translations/ko.json
@@ -0,0 +1,36 @@
+{
+    "config": {
+        "abort": {
+            "single_instance_allowed": "\uc774\ubbf8 \uad6c\uc131\ub428. \ud558\ub098\uc758 \uad6c\uc131\ub9cc \uac00\ub2a5\ud569\ub2c8\ub2e4.",
+            "unknown": "\uc608\uc0c1\uce58 \ubabb\ud55c \uc5d0\ub7ec"
+        },
+        "error": {
+            "cannot_connect": "\uc5f0\uacb0 \uc2e4\ud328",
+            "invalid_auth": "\uc798\ubabb\ub41c \uc778\uc99d"
+        },
+        "flow_title": "NZBGet : {name}",
+        "step": {
+            "user": {
+                "data": {
+                    "host": "\ud638\uc2a4\ud2b8",
+                    "name": "\uc774\ub984",
+                    "password": "\uc554\ud638",
+                    "port": "\ud3ec\ud2b8",
+                    "ssl": "NZBGet\uc740 SSL \uc778\uc99d\uc11c\ub97c \uc0ac\uc6a9\ud569\ub2c8\ub2e4.",
+                    "username": "\uc0ac\uc6a9\uc790\uba85",
+                    "verify_ssl": "NZBGet\uc740 \uc801\uc808\ud55c \uc778\uc99d\uc11c\ub97c \uc0ac\uc6a9\ud569\ub2c8\ub2e4."
+                },
+                "title": "NZBGet\uc5d0 \uc5f0\uacb0"
+            }
+        }
+    },
+    "options": {
+        "step": {
+            "init": {
+                "data": {
+                    "scan_interval": "\uc5c5\ub370\uc774\ud2b8 \uac04\uaca9 (\ucd08)"
+                }
+            }
+        }
+    }
+}
\ No newline at end of file
diff --git a/homeassistant/components/openweathermap/translations/ko.json b/homeassistant/components/openweathermap/translations/ko.json
new file mode 100644
index 00000000000..12e76d85506
--- /dev/null
+++ b/homeassistant/components/openweathermap/translations/ko.json
@@ -0,0 +1,35 @@
+{
+    "config": {
+        "abort": {
+            "already_configured": "\uc774\ub7ec\ud55c \uc88c\ud45c\uc5d0 \ub300\ud55c OpenWeatherMap \ud1b5\ud569\uc774 \uc774\ubbf8 \uad6c\uc131\ub418\uc5b4 \uc788\uc2b5\ub2c8\ub2e4."
+        },
+        "error": {
+            "auth": "API \ud0a4\uac00 \uc62c\ubc14\ub974\uc9c0 \uc54a\uc2b5\ub2c8\ub2e4.",
+            "connection": "OWM API\uc5d0 \uc5f0\uacb0\ud560 \uc218 \uc5c6\uc2b5\ub2c8\ub2e4."
+        },
+        "step": {
+            "user": {
+                "data": {
+                    "api_key": "OpenWeatherMap API \ud0a4",
+                    "language": "\uc5b8\uc5b4",
+                    "latitude": "\uc704\ub3c4",
+                    "longitude": "\uacbd\ub3c4",
+                    "mode": "\ubaa8\ub4dc",
+                    "name": "\ud1b5\ud569 \uad6c\uc131\uc694\uc18c\uba85"
+                },
+                "description": "OpenWeatherMap \ud1b5\ud569\uc744 \uc124\uc815\ud558\uc138\uc694. API \ud0a4\ub97c \uc0dd\uc131\ud558\ub824\uba74 https://openweathermap.org/appid\ub85c \uc774\ub3d9\ud558\uc2ed\uc2dc\uc624.",
+                "title": "OpenWeatherMap"
+            }
+        }
+    },
+    "options": {
+        "step": {
+            "init": {
+                "data": {
+                    "language": "\uc5b8\uc5b4",
+                    "mode": "\ubaa8\ub4dc"
+                }
+            }
+        }
+    }
+}
\ No newline at end of file
diff --git a/homeassistant/components/ozw/translations/et.json b/homeassistant/components/ozw/translations/et.json
new file mode 100644
index 00000000000..a167a4edd31
--- /dev/null
+++ b/homeassistant/components/ozw/translations/et.json
@@ -0,0 +1,7 @@
+{
+    "config": {
+        "abort": {
+            "mqtt_required": "MQTT sidumine pole seadistatud"
+        }
+    }
+}
\ No newline at end of file
diff --git a/homeassistant/components/plugwise/translations/ko.json b/homeassistant/components/plugwise/translations/ko.json
index df480242f6f..089e2daea82 100644
--- a/homeassistant/components/plugwise/translations/ko.json
+++ b/homeassistant/components/plugwise/translations/ko.json
@@ -19,5 +19,15 @@
                 "title": "Smile \uc5d0 \uc5f0\uacb0\ud558\uae30"
             }
         }
+    },
+    "options": {
+        "step": {
+            "init": {
+                "data": {
+                    "scan_interval": "\uc2a4\uce94 \uac04\uaca9 (\ucd08)"
+                },
+                "description": "Plugwise \uc635\uc158 \uc870\uc815"
+            }
+        }
     }
 }
\ No newline at end of file
diff --git a/homeassistant/components/progettihwsw/translations/ko.json b/homeassistant/components/progettihwsw/translations/ko.json
new file mode 100644
index 00000000000..b8b78de069c
--- /dev/null
+++ b/homeassistant/components/progettihwsw/translations/ko.json
@@ -0,0 +1,43 @@
+{
+    "config": {
+        "abort": {
+            "already_configured": "\uc7a5\uce58\ub294 \uc774\ubbf8 \uad6c\uc131\ub418\uc5b4 \uc788\uc2b5\ub2c8\ub2e4."
+        },
+        "error": {
+            "cannot_connect": "\uc5f0\uacb0 \uc2e4\ud328",
+            "unknown": "\uc608\uc0c1\uce58 \ubabb\ud55c \uc5d0\ub7ec",
+            "wrong_info_relay_modes": "\ub9b4\ub808\uc774 \ubaa8\ub4dc \uc120\ud0dd\uc740 Monostable \ub610\ub294 Bistable \uc774\uc5b4\uc57c \ud569\ub2c8\ub2e4."
+        },
+        "step": {
+            "relay_modes": {
+                "data": {
+                    "relay_1": "\ub9b4\ub808\uc774 1",
+                    "relay_10": "\ub9b4\ub808\uc774 10",
+                    "relay_11": "\ub9b4\ub808\uc774 11",
+                    "relay_12": "\ub9b4\ub808\uc774 12",
+                    "relay_13": "\ub9b4\ub808\uc774 13",
+                    "relay_14": "\ub9b4\ub808\uc774 14",
+                    "relay_15": "\ub9b4\ub808\uc774 15",
+                    "relay_16": "\ub9b4\ub808\uc774 16",
+                    "relay_2": "\ub9b4\ub808\uc774 2",
+                    "relay_3": "\ub9b4\ub808\uc774 3",
+                    "relay_4": "\ub9b4\ub808\uc774 4",
+                    "relay_5": "\ub9b4\ub808\uc774 5",
+                    "relay_6": "\ub9b4\ub808\uc774 6",
+                    "relay_7": "\ub9b4\ub808\uc774 7",
+                    "relay_8": "\ub9b4\ub808\uc774 8",
+                    "relay_9": "\ub9b4\ub808\uc774 9"
+                },
+                "title": "\ub9b4\ub808\uc774 \uc124\uc815"
+            },
+            "user": {
+                "data": {
+                    "host": "\ud638\uc2a4\ud2b8",
+                    "port": "\ud3ec\ud2b8"
+                },
+                "title": "\ubcf4\ub4dc \uc124\uc815"
+            }
+        }
+    },
+    "title": "ProgettiHWSW \uc790\ub3d9\ud654"
+}
\ No newline at end of file
diff --git a/homeassistant/components/remote/translations/ko.json b/homeassistant/components/remote/translations/ko.json
index b866fd7fee5..bd055e21f5b 100644
--- a/homeassistant/components/remote/translations/ko.json
+++ b/homeassistant/components/remote/translations/ko.json
@@ -1,4 +1,19 @@
 {
+    "device_automation": {
+        "action_type": {
+            "toggle": "{entity_name} \ud1a0\uae00",
+            "turn_off": "{entity_name} \ub044\uae30",
+            "turn_on": "{entity_name} \ucf1c\uae30"
+        },
+        "condition_type": {
+            "is_off": "{entity_name} \uc774 \uaebc\uc838 \uc788\uc73c\uba74",
+            "is_on": "{entity_name} \uc774 \ucf1c\uc838 \uc788\uc73c\uba74"
+        },
+        "trigger_type": {
+            "turned_off": "{entity_name} \uaebc\uc9d0",
+            "turned_on": "{entity_name} \ucf1c\uc9d0"
+        }
+    },
     "state": {
         "_": {
             "off": "\uaebc\uc9d0",
diff --git a/homeassistant/components/risco/translations/ko.json b/homeassistant/components/risco/translations/ko.json
new file mode 100644
index 00000000000..1268388acce
--- /dev/null
+++ b/homeassistant/components/risco/translations/ko.json
@@ -0,0 +1,28 @@
+{
+    "options": {
+        "step": {
+            "ha_to_risco": {
+                "data": {
+                    "armed_away": "\uacbd\ube44\uc911(\uc678\ucd9c)",
+                    "armed_custom_bypass": "\uacbd\ube44\uc911(\uc0ac\uc6a9\uc790 \uc6b0\ud68c)",
+                    "armed_home": "\uc9d1\uc548 \uacbd\ube44\uc911",
+                    "armed_night": "\uc57c\uac04 \uacbd\ube44\uc911"
+                },
+                "description": "Home Assistant \uc54c\ub78c\uc744 \ud65c\uc131\ud654 \ud560 \ub54c Risco \uc54c\ub78c\uc758 \uc0c1\ud0dc\ub97c \uc120\ud0dd\ud558\uc2ed\uc2dc\uc624.",
+                "title": "Home Assistant \uc0c1\ud0dc\ub97c Risco \uc0c1\ud0dc\ub85c \ub9e4\ud551"
+            },
+            "risco_to_ha": {
+                "data": {
+                    "A": "\uadf8\ub8f9 A",
+                    "B": "\uadf8\ub8f9 B",
+                    "C": "\uadf8\ub8f9 C",
+                    "D": "\uadf8\ub8f9 D",
+                    "arm": "\uacbd\ube44\uc911(\uc678\ucd9c)",
+                    "partial_arm": "\ubd80\ubd84 \uacbd\ube44 \uc124\uc815 (\uc7ac\uc2e4)"
+                },
+                "description": "Risco\uc5d0\uc11c\ubcf4\uace0\ud558\ub294 \ubaa8\ub4e0 \uc0c1\ud0dc\uc5d0 \ub300\ud574 Home Assistant \uc54c\ub78c\uc774 \ubcf4\uace0 \ud560 \uc0c1\ud0dc\ub97c \uc120\ud0dd\ud569\ub2c8\ub2e4.",
+                "title": "Risco \uc0c1\ud0dc\ub97c \ud648 \uc5b4\uc2dc\uc2a4\ud134\ud2b8 \uc0c1\ud0dc\uc5d0 \ub9e4\ud551"
+            }
+        }
+    }
+}
\ No newline at end of file
diff --git a/homeassistant/components/rpi_power/translations/ko.json b/homeassistant/components/rpi_power/translations/ko.json
new file mode 100644
index 00000000000..02271833220
--- /dev/null
+++ b/homeassistant/components/rpi_power/translations/ko.json
@@ -0,0 +1,14 @@
+{
+    "config": {
+        "abort": {
+            "no_devices_found": "\uc774 \uad6c\uc131 \uc694\uc18c\uc5d0 \ud544\uc694\ud55c \uc2dc\uc2a4\ud15c \ud074\ub798\uc2a4\ub97c \ucc3e\uc744 \uc218 \uc5c6\uc2b5\ub2c8\ub2e4. \ucee4\ub110\uc774 \ucd5c\uc2e0\uc774\uace0 \ud558\ub4dc\uc6e8\uc5b4\uac00 \uc9c0\uc6d0\ub418\ub294\uc9c0 \ud655\uc778\ud558\uc2ed\uc2dc\uc624.",
+            "single_instance_allowed": "\uc774\ubbf8 \uc124\uc815\ub418\uc5b4 \uc788\uc74c. \ud558\ub098\uc758 \uc124\uc815\ub9cc \uac00\ub2a5\ud568."
+        },
+        "step": {
+            "confirm": {
+                "description": "\uc124\uc815\uc744 \uc2dc\uc791\ud558\uc2dc\uaca0\uc2b5\ub2c8\uae4c?"
+            }
+        }
+    },
+    "title": "\ub77c\uc988\ubca0\ub9ac\ud30c\uc774 \uc804\uc6d0 \uacf5\uae09 \uc7a5\uce58 \uac80\uc0ac\uae30"
+}
\ No newline at end of file
diff --git a/homeassistant/components/season/translations/sensor.et.json b/homeassistant/components/season/translations/sensor.et.json
new file mode 100644
index 00000000000..eb9953a73ce
--- /dev/null
+++ b/homeassistant/components/season/translations/sensor.et.json
@@ -0,0 +1,16 @@
+{
+    "state": {
+        "season__season": {
+            "autumn": "S\u00fcgis",
+            "spring": "Kevad",
+            "summer": "Suvi",
+            "winter": "Talv"
+        },
+        "season__season__": {
+            "autumn": "S\u00fcgis",
+            "spring": "Kevad",
+            "summer": "Suvi",
+            "winter": "Talv"
+        }
+    }
+}
\ No newline at end of file
diff --git a/homeassistant/components/sensor/translations/et.json b/homeassistant/components/sensor/translations/et.json
index 545abddd1f9..d45ba964d70 100644
--- a/homeassistant/components/sensor/translations/et.json
+++ b/homeassistant/components/sensor/translations/et.json
@@ -17,7 +17,10 @@
             "illuminance": "{entity_name} valgustustugevus muutub",
             "power": "{entity_name} energiare\u017eiimi muutub",
             "pressure": "{entity_name} r\u00f5hk muutub",
-            "signal_strength": "{entity_name} signaalitugevus muutub"
+            "signal_strength": "{entity_name} signaalitugevus muutub",
+            "temperature": "{entity_name} temperatuur muutub",
+            "timestamp": "{entity_name} aeg muutub",
+            "value": "{entity_name} v\u00e4\u00e4rtus muutub"
         }
     },
     "state": {
diff --git a/homeassistant/components/sharkiq/translations/ko.json b/homeassistant/components/sharkiq/translations/ko.json
new file mode 100644
index 00000000000..d7e196c09fb
--- /dev/null
+++ b/homeassistant/components/sharkiq/translations/ko.json
@@ -0,0 +1,29 @@
+{
+    "config": {
+        "abort": {
+            "already_configured_account": "\uacc4\uc815\uc774 \uc774\ubbf8 \uad6c\uc131\ub418\uc5b4 \uc788\uc2b5\ub2c8\ub2e4.",
+            "cannot_connect": "\uc5f0\uacb0 \uc2e4\ud328",
+            "reauth_successful": "\uc561\uc138\uc2a4 \ud1a0\ud070\uc774 \uc131\uacf5\uc801\uc73c\ub85c \uc5c5\ub370\uc774\ud2b8\ub418\uc5c8\uc2b5\ub2c8\ub2e4",
+            "unknown": "\uc608\uc0c1\uce58 \ubabb\ud55c \uc5d0\ub7ec"
+        },
+        "error": {
+            "cannot_connect": "\uc5f0\uacb0 \uc2e4\ud328",
+            "invalid_auth": "\uc798\ubabb\ub41c \uc778\uc99d",
+            "unknown": "\uc608\uc0c1\uce58 \ubabb\ud55c \uc5d0\ub7ec"
+        },
+        "step": {
+            "reauth": {
+                "data": {
+                    "password": "\uc554\ud638",
+                    "username": "\uc0ac\uc6a9\uc790\uba85"
+                }
+            },
+            "user": {
+                "data": {
+                    "password": "\uc554\ud638",
+                    "username": "\uc0ac\uc6a9\uc790\uba85"
+                }
+            }
+        }
+    }
+}
\ No newline at end of file
diff --git a/homeassistant/components/shelly/translations/ko.json b/homeassistant/components/shelly/translations/ko.json
new file mode 100644
index 00000000000..3bf8db7d50e
--- /dev/null
+++ b/homeassistant/components/shelly/translations/ko.json
@@ -0,0 +1,15 @@
+{
+    "config": {
+        "error": {
+            "invalid_auth": "\uc798\ubabb\ub41c \uc778\uc99d"
+        },
+        "step": {
+            "credentials": {
+                "data": {
+                    "password": "\uc554\ud638",
+                    "username": "\uc0ac\uc6a9\uc790\uba85"
+                }
+            }
+        }
+    }
+}
\ No newline at end of file
diff --git a/homeassistant/components/smappee/translations/ko.json b/homeassistant/components/smappee/translations/ko.json
index 05557a6046d..129cc0814bf 100644
--- a/homeassistant/components/smappee/translations/ko.json
+++ b/homeassistant/components/smappee/translations/ko.json
@@ -2,7 +2,8 @@
     "config": {
         "abort": {
             "authorize_url_timeout": "\uc778\uc99d url \uc0dd\uc131 \uc2dc\uac04\uc774 \ucd08\uacfc\ub418\uc5c8\uc2b5\ub2c8\ub2e4.",
-            "missing_configuration": "\uad6c\uc131\uc694\uc18c\uac00 \uad6c\uc131\ub418\uc9c0 \uc54a\uc558\uc2b5\ub2c8\ub2e4. \uc124\uba85\uc11c\ub97c \ucc38\uace0\ud574\uc8fc\uc138\uc694."
+            "missing_configuration": "\uad6c\uc131\uc694\uc18c\uac00 \uad6c\uc131\ub418\uc9c0 \uc54a\uc558\uc2b5\ub2c8\ub2e4. \uc124\uba85\uc11c\ub97c \ucc38\uace0\ud574\uc8fc\uc138\uc694.",
+            "no_url_available": "\uac00\ub2a5\ud55c URL\uc774 \uc5c6\uc2b5\ub2c8\ub2e4. \uc774 \uc5d0\ub7ec\uc5d0 \ub300\ud55c \uc815\ubcf4\ub294 \ub3c4\uc6b0\ub9d0 \uc139\uc158\uc744 \ud655\uc778\ud558\uc138\uc694({docs_url})"
         },
         "step": {
             "pick_implementation": {
diff --git a/homeassistant/components/somfy/translations/ko.json b/homeassistant/components/somfy/translations/ko.json
index 9748da483bf..157640c1fa7 100644
--- a/homeassistant/components/somfy/translations/ko.json
+++ b/homeassistant/components/somfy/translations/ko.json
@@ -3,7 +3,8 @@
         "abort": {
             "already_setup": "\ud558\ub098\uc758 Somfy \uacc4\uc815\ub9cc \uad6c\uc131\ud560 \uc218 \uc788\uc2b5\ub2c8\ub2e4.",
             "authorize_url_timeout": "\uc778\uc99d url \uc0dd\uc131 \uc2dc\uac04\uc774 \ucd08\uacfc\ub418\uc5c8\uc2b5\ub2c8\ub2e4.",
-            "missing_configuration": "Somfy \uad6c\uc131\uc694\uc18c\uac00 \uad6c\uc131\ub418\uc9c0 \uc54a\uc558\uc2b5\ub2c8\ub2e4. \uc124\uba85\uc11c\ub97c \ucc38\uace0\ud574\uc8fc\uc138\uc694."
+            "missing_configuration": "Somfy \uad6c\uc131\uc694\uc18c\uac00 \uad6c\uc131\ub418\uc9c0 \uc54a\uc558\uc2b5\ub2c8\ub2e4. \uc124\uba85\uc11c\ub97c \ucc38\uace0\ud574\uc8fc\uc138\uc694.",
+            "no_url_available": "\uac00\ub2a5\ud55c URL\uc774 \uc5c6\uc2b5\ub2c8\ub2e4. \uc774 \uc5d0\ub7ec\uc5d0 \ub300\ud55c \uc815\ubcf4\ub294 \ub3c4\uc6b0\ub9d0 \uc139\uc158\uc744 \ud655\uc778\ud558\uc138\uc694({docs_url})"
         },
         "create_entry": {
             "default": "Somfy \ub85c \uc131\uacf5\uc801\uc73c\ub85c \uc778\uc99d\ub418\uc5c8\uc2b5\ub2c8\ub2e4."
diff --git a/homeassistant/components/spotify/translations/et.json b/homeassistant/components/spotify/translations/et.json
new file mode 100644
index 00000000000..059b892f009
--- /dev/null
+++ b/homeassistant/components/spotify/translations/et.json
@@ -0,0 +1,17 @@
+{
+    "config": {
+        "abort": {
+            "already_setup": "Saate konfigureerida ainult \u00fche Spotify konto.",
+            "authorize_url_timeout": "Kinnituse URLi ajal\u00f5pp",
+            "missing_configuration": "Spotify sidumine pole seadistatud. Palun j\u00e4rgige dokumentatsiooni."
+        },
+        "create_entry": {
+            "default": "Edukalt Spotifyga autenditud."
+        },
+        "step": {
+            "pick_implementation": {
+                "title": "Valige autentimismeetod"
+            }
+        }
+    }
+}
\ No newline at end of file
diff --git a/homeassistant/components/spotify/translations/ko.json b/homeassistant/components/spotify/translations/ko.json
index deb55479c1e..2b9ebfe8bf6 100644
--- a/homeassistant/components/spotify/translations/ko.json
+++ b/homeassistant/components/spotify/translations/ko.json
@@ -3,7 +3,8 @@
         "abort": {
             "already_setup": "\ud558\ub098\uc758 Spotify \uacc4\uc815\ub9cc \uad6c\uc131\ud560 \uc218 \uc788\uc2b5\ub2c8\ub2e4.",
             "authorize_url_timeout": "\uc778\uc99d url \uc0dd\uc131 \uc2dc\uac04\uc774 \ucd08\uacfc\ub418\uc5c8\uc2b5\ub2c8\ub2e4.",
-            "missing_configuration": "Spotify \uad6c\uc131\uc694\uc18c\uac00 \uad6c\uc131\ub418\uc9c0 \uc54a\uc558\uc2b5\ub2c8\ub2e4. \uc124\uba85\uc11c\ub97c \ucc38\uace0\ud574\uc8fc\uc138\uc694."
+            "missing_configuration": "Spotify \uad6c\uc131\uc694\uc18c\uac00 \uad6c\uc131\ub418\uc9c0 \uc54a\uc558\uc2b5\ub2c8\ub2e4. \uc124\uba85\uc11c\ub97c \ucc38\uace0\ud574\uc8fc\uc138\uc694.",
+            "no_url_available": "\uac00\ub2a5\ud55c URL\uc774 \uc5c6\uc2b5\ub2c8\ub2e4. \uc774 \uc5d0\ub7ec\uc5d0 \ub300\ud55c \uc815\ubcf4\ub294 \ub3c4\uc6b0\ub9d0 \uc139\uc158\uc744 \ud655\uc778\ud558\uc138\uc694({docs_url})"
         },
         "create_entry": {
             "default": "Spotify \ub85c \uc131\uacf5\uc801\uc73c\ub85c \uc778\uc99d\ub418\uc5c8\uc2b5\ub2c8\ub2e4."
@@ -11,6 +12,10 @@
         "step": {
             "pick_implementation": {
                 "title": "\uc778\uc99d \ubc29\ubc95 \uc120\ud0dd\ud558\uae30"
+            },
+            "reauth_confirm": {
+                "description": "Spotify \ud1b5\ud569\uc740 \uacc4\uc815 {account} \ub300\ud574 Spotify\ub85c \ub2e4\uc2dc \uc778\uc99d\ud574\uc57c\ud569\ub2c8\ub2e4.",
+                "title": "Spotify\ub85c \uc7ac \uc778\uc99d"
             }
         }
     }
diff --git a/homeassistant/components/starline/translations/et.json b/homeassistant/components/starline/translations/et.json
new file mode 100644
index 00000000000..7e3c4103ccf
--- /dev/null
+++ b/homeassistant/components/starline/translations/et.json
@@ -0,0 +1,15 @@
+{
+    "config": {
+        "step": {
+            "auth_mfa": {
+                "title": "Kaheastmeline autoriseerimine"
+            },
+            "auth_user": {
+                "data": {
+                    "password": "Salas\u00f5na",
+                    "username": "Kasutajanimi"
+                }
+            }
+        }
+    }
+}
\ No newline at end of file
diff --git a/homeassistant/components/switch/translations/et.json b/homeassistant/components/switch/translations/et.json
index d992df0421f..404f9c961bf 100644
--- a/homeassistant/components/switch/translations/et.json
+++ b/homeassistant/components/switch/translations/et.json
@@ -1,4 +1,10 @@
 {
+    "device_automation": {
+        "condition_type": {
+            "is_off": "{entity_name} on v\u00e4lja l\u00fclitatud",
+            "is_on": "{entity_name} on sisse l\u00fclitatud"
+        }
+    },
     "state": {
         "_": {
             "off": "V\u00e4ljas",
diff --git a/homeassistant/components/synology_dsm/translations/ko.json b/homeassistant/components/synology_dsm/translations/ko.json
index 81b7d5f1435..6c0dc98b4ae 100644
--- a/homeassistant/components/synology_dsm/translations/ko.json
+++ b/homeassistant/components/synology_dsm/translations/ko.json
@@ -44,7 +44,8 @@
         "step": {
             "init": {
                 "data": {
-                    "scan_interval": "\uc2a4\uce94 \uac04\uaca9(\ubd84)"
+                    "scan_interval": "\uc2a4\uce94 \uac04\uaca9(\ubd84)",
+                    "timeout": "\uc81c\ud55c \uc2dc\uac04 (\ucd08)"
                 }
             }
         }
diff --git a/homeassistant/components/toon/translations/ko.json b/homeassistant/components/toon/translations/ko.json
index bebd8bb912e..e0903a8087c 100644
--- a/homeassistant/components/toon/translations/ko.json
+++ b/homeassistant/components/toon/translations/ko.json
@@ -5,7 +5,8 @@
             "authorize_url_fail": "\uc778\uc99d url \uc0dd\uc131\uc5d0 \uc54c \uc218 \uc5c6\ub294 \uc624\ub958\uac00 \ubc1c\uc0dd\ud588\uc2b5\ub2c8\ub2e4.",
             "authorize_url_timeout": "\uc778\uc99d URL \uc0dd\uc131 \uc2dc\uac04\uc774 \ucd08\uacfc\ub418\uc5c8\uc2b5\ub2c8\ub2e4.",
             "missing_configuration": "\uad6c\uc131\uc694\uc18c\uac00 \uad6c\uc131\ub418\uc9c0 \uc54a\uc558\uc2b5\ub2c8\ub2e4. \uc124\uba85\uc11c\ub97c \ucc38\uace0\ud574\uc8fc\uc138\uc694.",
-            "no_agreements": "\uc774 \uacc4\uc815\uc5d0\ub294 Toon \ub514\uc2a4\ud50c\ub808\uc774\uac00 \uc5c6\uc2b5\ub2c8\ub2e4."
+            "no_agreements": "\uc774 \uacc4\uc815\uc5d0\ub294 Toon \ub514\uc2a4\ud50c\ub808\uc774\uac00 \uc5c6\uc2b5\ub2c8\ub2e4.",
+            "no_url_available": "\uac00\ub2a5\ud55c URL\uc774 \uc5c6\uc2b5\ub2c8\ub2e4. \uc774 \uc5d0\ub7ec\uc5d0 \ub300\ud55c \uc815\ubcf4\ub294 \ub3c4\uc6b0\ub9d0 \uc139\uc158\uc744 \ud655\uc778\ud558\uc138\uc694({docs_url})"
         },
         "step": {
             "agreement": {
diff --git a/homeassistant/components/tuya/translations/et.json b/homeassistant/components/tuya/translations/et.json
new file mode 100644
index 00000000000..0086fd641f8
--- /dev/null
+++ b/homeassistant/components/tuya/translations/et.json
@@ -0,0 +1,24 @@
+{
+    "config": {
+        "abort": {
+            "auth_failed": "Viga tuvastamisel",
+            "conn_error": "\u00dchendamine eba\u00f5nnestus",
+            "single_instance_allowed": "Juba seadistatud. V\u00f5imalik on ainult \u00fcks sidumine."
+        },
+        "error": {
+            "auth_failed": "Vigane tuvastamine"
+        },
+        "flow_title": "Tuya seaded",
+        "step": {
+            "user": {
+                "data": {
+                    "country_code": "Teie konto riigikood (nt 1 USA v\u00f5i 372 Eesti)",
+                    "password": "Salas\u00f5na",
+                    "platform": "\u00c4pp kus teie konto registreeriti",
+                    "username": "Kasutajanimi"
+                },
+                "description": "Sisestage oma Tuya konto andmed."
+            }
+        }
+    }
+}
\ No newline at end of file
diff --git a/homeassistant/components/unifi/translations/ko.json b/homeassistant/components/unifi/translations/ko.json
index a3d2c8f3b69..94160829bad 100644
--- a/homeassistant/components/unifi/translations/ko.json
+++ b/homeassistant/components/unifi/translations/ko.json
@@ -54,7 +54,8 @@
             },
             "statistics_sensors": {
                 "data": {
-                    "allow_bandwidth_sensors": "\ub124\ud2b8\uc6cc\ud06c \ud074\ub77c\uc774\uc5b8\ud2b8 \ub300\uc5ed\ud3ed \uc0ac\uc6a9\ub7c9 \uc13c\uc11c"
+                    "allow_bandwidth_sensors": "\ub124\ud2b8\uc6cc\ud06c \ud074\ub77c\uc774\uc5b8\ud2b8 \ub300\uc5ed\ud3ed \uc0ac\uc6a9\ub7c9 \uc13c\uc11c",
+                    "allow_uptime_sensors": "\ub124\ud2b8\uc6cc\ud06c \ud074\ub77c\uc774\uc5b8\ud2b8\ub97c \uc704\ud55c \uac00\ub3d9 \uc2dc\uac04 \uc13c\uc11c"
                 },
                 "description": "\ud1b5\uacc4 \uc13c\uc11c \uad6c\uc131",
                 "title": "UniFi \uc635\uc158 3/3"
diff --git a/homeassistant/components/upnp/translations/et.json b/homeassistant/components/upnp/translations/et.json
new file mode 100644
index 00000000000..76145d6e6e1
--- /dev/null
+++ b/homeassistant/components/upnp/translations/et.json
@@ -0,0 +1,30 @@
+{
+    "config": {
+        "abort": {
+            "already_configured": "UPnP / IGD on juba seadistatud",
+            "incomplete_discovery": "Mittet\u00e4ielik avastamine",
+            "no_devices_discovered": "\u00dchtegi UPnP / IGD-d ei avastatud",
+            "no_devices_found": "V\u00f5rgust ei leitud \u00fchtegi UPnP / IGD-seadet."
+        },
+        "error": {
+            "one": "\u00fcks",
+            "other": "Teine"
+        },
+        "flow_title": "UPnP / IGD: {name}",
+        "step": {
+            "init": {
+                "one": "\u00dcks",
+                "other": "Teine"
+            },
+            "ssdp_confirm": {
+                "description": "Kas soovite UPnP / IGD seadme seadistada?"
+            },
+            "user": {
+                "data": {
+                    "scan_interval": "P\u00e4ringute intervall (sekundites, v\u00e4hemalt 30)",
+                    "usn": "Seade"
+                }
+            }
+        }
+    }
+}
\ No newline at end of file
diff --git a/homeassistant/components/withings/translations/ko.json b/homeassistant/components/withings/translations/ko.json
index 74dacdd2cac..2104b2a9570 100644
--- a/homeassistant/components/withings/translations/ko.json
+++ b/homeassistant/components/withings/translations/ko.json
@@ -3,7 +3,8 @@
         "abort": {
             "already_configured": "\ud504\ub85c\ud544\uc5d0 \ub300\ud55c \uad6c\uc131\uc774 \uc5c5\ub370\uc774\ud2b8\ub418\uc5c8\uc2b5\ub2c8\ub2e4.",
             "authorize_url_timeout": "\uc778\uc99d url \uc0dd\uc131 \uc2dc\uac04\uc774 \ucd08\uacfc\ub418\uc5c8\uc2b5\ub2c8\ub2e4.",
-            "missing_configuration": "Withings \uad6c\uc131\uc694\uc18c\uac00 \uad6c\uc131\ub418\uc9c0 \uc54a\uc558\uc2b5\ub2c8\ub2e4. \uc124\uba85\uc11c\ub97c \ucc38\uace0\ud574\uc8fc\uc138\uc694."
+            "missing_configuration": "Withings \uad6c\uc131\uc694\uc18c\uac00 \uad6c\uc131\ub418\uc9c0 \uc54a\uc558\uc2b5\ub2c8\ub2e4. \uc124\uba85\uc11c\ub97c \ucc38\uace0\ud574\uc8fc\uc138\uc694.",
+            "no_url_available": "\uac00\ub2a5\ud55c URL\uc774 \uc5c6\uc2b5\ub2c8\ub2e4. \uc774 \uc5d0\ub7ec\uc5d0 \ub300\ud55c \uc815\ubcf4\ub294 \ub3c4\uc6b0\ub9d0 \uc139\uc158\uc744 \ud655\uc778\ud558\uc138\uc694({docs_url})"
         },
         "create_entry": {
             "default": "Withings \ub85c \uc131\uacf5\uc801\uc73c\ub85c \uc778\uc99d\ub418\uc5c8\uc2b5\ub2c8\ub2e4."
diff --git a/homeassistant/components/wled/translations/et.json b/homeassistant/components/wled/translations/et.json
new file mode 100644
index 00000000000..794bd87e42f
--- /dev/null
+++ b/homeassistant/components/wled/translations/et.json
@@ -0,0 +1,24 @@
+{
+    "config": {
+        "abort": {
+            "already_configured": "See WLED seade on juba konfigureeritud.",
+            "connection_error": "WLED-seadmega \u00fchenduse loomine nurjus."
+        },
+        "error": {
+            "connection_error": "WLED-seadmega \u00fchenduse loomine nurjus."
+        },
+        "flow_title": "WLED: {name}",
+        "step": {
+            "user": {
+                "data": {
+                    "host": "Host"
+                },
+                "description": "Seadista WLED-i sidumine Home Assistantiga."
+            },
+            "zeroconf_confirm": {
+                "description": "Kas soovite lisada WLED {nimi} Home Assistanti?",
+                "title": "Leitud WLED seade"
+            }
+        }
+    }
+}
\ No newline at end of file
diff --git a/homeassistant/components/yeelight/translations/ko.json b/homeassistant/components/yeelight/translations/ko.json
new file mode 100644
index 00000000000..c04006e2c8f
--- /dev/null
+++ b/homeassistant/components/yeelight/translations/ko.json
@@ -0,0 +1,40 @@
+{
+    "config": {
+        "abort": {
+            "already_configured": "\uc7a5\uce58\uac00 \uc774\ubbf8 \uad6c\uc131\ub418\uc5b4 \uc788\uc2b5\ub2c8\ub2e4.",
+            "no_devices_found": "\ub124\ud2b8\uc6cc\ud06c \uc0c1\uc5d0 \ubc1c\uacac\ub41c \uc7a5\uce58\uac00 \uc5c6\uc2b5\ub2c8\ub2e4."
+        },
+        "error": {
+            "cannot_connect": "\uc5f0\uacb0 \uc2e4\ud328"
+        },
+        "step": {
+            "pick_device": {
+                "data": {
+                    "device": "\uc7a5\uce58"
+                }
+            },
+            "user": {
+                "data": {
+                    "host": "\ud638\uc2a4\ud2b8",
+                    "ip_address": "IP \uc8fc\uc18c"
+                },
+                "description": "\ud638\uc2a4\ud2b8\ub97c \ube44\uc6cc\ub450\uba74 \uc7a5\uce58\ub97c \ucc3e\ub294 \ub370 \uac80\uc0c9\uc774 \uc0ac\uc6a9\ub429\ub2c8\ub2e4."
+            }
+        }
+    },
+    "options": {
+        "step": {
+            "init": {
+                "data": {
+                    "model": "\ubaa8\ub378(\uc120\ud0dd \uc0ac\ud56d)",
+                    "nightlight_switch": "\uc57c\uac04 \uc870\uba85 \uc2a4\uc704\uce58 \uc0ac\uc6a9",
+                    "save_on_change": "\ubcc0\uacbd\uc2dc \uc0c1\ud0dc \uc800\uc7a5",
+                    "transition": "\uc804\ud658 \uc2dc\uac04(ms)",
+                    "use_music_mode": "\uc74c\uc545 \ubaa8\ub4dc \ud65c\uc131\ud654"
+                },
+                "description": "\ubaa8\ub378\uc744 \ube44\uc6cc \ub450\uba74 \uc790\ub3d9\uc73c\ub85c \uac80\uc0c9\ub429\ub2c8\ub2e4."
+            }
+        }
+    },
+    "title": "\uc774\ub77c\uc774\ud2b8"
+}
\ No newline at end of file
diff --git a/homeassistant/components/zoneminder/translations/ko.json b/homeassistant/components/zoneminder/translations/ko.json
new file mode 100644
index 00000000000..3625d6e402e
--- /dev/null
+++ b/homeassistant/components/zoneminder/translations/ko.json
@@ -0,0 +1,30 @@
+{
+    "config": {
+        "abort": {
+            "auth_fail": "\uc0ac\uc6a9\uc790\uba85\uacfc \uc554\ud638\uac00 \uc62c\ubc14\ub974\uc9c0 \uc54a\uc2b5\ub2c8\ub2e4.",
+            "connection_error": "ZoneMinder \uc11c\ubc84\uc5d0 \uc5f0\uacb0\ud558\uc9c0 \ubabb\ud588\uc2b5\ub2c8\ub2e4."
+        },
+        "create_entry": {
+            "default": "ZoneMinder \uc11c\ubc84\uac00 \ucd94\uac00\ub418\uc5c8\uc2b5\ub2c8\ub2e4."
+        },
+        "error": {
+            "auth_fail": "\uc0ac\uc6a9\uc790\uba85\uacfc \uc554\ud638\uac00 \uc62c\ubc14\ub974\uc9c0 \uc54a\uc2b5\ub2c8\ub2e4.",
+            "connection_error": "ZoneMinder \uc11c\ubc84\uc5d0 \uc5f0\uacb0\ud558\uc9c0 \ubabb\ud588\uc2b5\ub2c8\ub2e4."
+        },
+        "flow_title": "ZoneMinder",
+        "step": {
+            "user": {
+                "data": {
+                    "host": "\ud638\uc2a4\ud2b8 \ubc0f \ud3ec\ud2b8(\uc608: 10.10.0.4:8010)",
+                    "password": "\uc554\ud638",
+                    "path": "ZMS \uacbd\ub85c",
+                    "path_zms": "ZMS \uacbd\ub85c",
+                    "ssl": "ZoneMinder \uc5f0\uacb0\uc5d0 SSL \uc0ac\uc6a9",
+                    "username": "\uc0ac\uc6a9\uc790\uba85",
+                    "verify_ssl": "SSL \uc778\uc99d\uc11c \ud655\uc778"
+                },
+                "title": "ZoneMinder \uc11c\ubc84\ub97c \ucd94\uac00\ud558\uc138\uc694."
+            }
+        }
+    }
+}
\ No newline at end of file