diff --git a/homeassistant/components/dremel_3d_printer/binary_sensor.py b/homeassistant/components/dremel_3d_printer/binary_sensor.py
index 1832e10d3c9..3a92bfe5510 100644
--- a/homeassistant/components/dremel_3d_printer/binary_sensor.py
+++ b/homeassistant/components/dremel_3d_printer/binary_sensor.py
@@ -36,13 +36,11 @@ class Dremel3DPrinterBinarySensorEntityDescription(
 BINARY_SENSOR_TYPES: tuple[Dremel3DPrinterBinarySensorEntityDescription, ...] = (
     Dremel3DPrinterBinarySensorEntityDescription(
         key="door",
-        name="Door",
         device_class=BinarySensorDeviceClass.DOOR,
         value_fn=lambda api: api.is_door_open(),
     ),
     Dremel3DPrinterBinarySensorEntityDescription(
         key="running",
-        name="Running",
         device_class=BinarySensorDeviceClass.RUNNING,
         value_fn=lambda api: api.is_running(),
     ),
diff --git a/homeassistant/components/dremel_3d_printer/sensor.py b/homeassistant/components/dremel_3d_printer/sensor.py
index 00002e44c4e..71e60dc04fc 100644
--- a/homeassistant/components/dremel_3d_printer/sensor.py
+++ b/homeassistant/components/dremel_3d_printer/sensor.py
@@ -50,13 +50,13 @@ class Dremel3DPrinterSensorEntityDescription(
 SENSOR_TYPES: tuple[Dremel3DPrinterSensorEntityDescription, ...] = (
     Dremel3DPrinterSensorEntityDescription(
         key="job_phase",
-        name="Job phase",
+        translation_key="job_phase",
         icon="mdi:printer-3d",
         value_fn=lambda api, _: api.get_printing_status(),
     ),
     Dremel3DPrinterSensorEntityDescription(
         key="remaining_time",
-        name="Remaining time",
+        translation_key="remaining_time",
         device_class=SensorDeviceClass.TIMESTAMP,
         available_fn=lambda api, key: api.get_job_status()[key] > 0,
         value_fn=ignore_variance(
@@ -66,7 +66,7 @@ SENSOR_TYPES: tuple[Dremel3DPrinterSensorEntityDescription, ...] = (
     ),
     Dremel3DPrinterSensorEntityDescription(
         key="progress",
-        name="Progress",
+        translation_key="progress",
         icon="mdi:printer-3d-nozzle",
         native_unit_of_measurement=PERCENTAGE,
         state_class=SensorStateClass.MEASUREMENT,
@@ -76,7 +76,7 @@ SENSOR_TYPES: tuple[Dremel3DPrinterSensorEntityDescription, ...] = (
     ),
     Dremel3DPrinterSensorEntityDescription(
         key="chamber",
-        name="Chamber",
+        translation_key="chamber",
         device_class=SensorDeviceClass.TEMPERATURE,
         native_unit_of_measurement=UnitOfTemperature.CELSIUS,
         state_class=SensorStateClass.MEASUREMENT,
@@ -86,7 +86,7 @@ SENSOR_TYPES: tuple[Dremel3DPrinterSensorEntityDescription, ...] = (
     ),
     Dremel3DPrinterSensorEntityDescription(
         key="platform_temperature",
-        name="Platform temperature",
+        translation_key="platform_temperature",
         device_class=SensorDeviceClass.TEMPERATURE,
         native_unit_of_measurement=UnitOfTemperature.CELSIUS,
         state_class=SensorStateClass.MEASUREMENT,
@@ -96,7 +96,7 @@ SENSOR_TYPES: tuple[Dremel3DPrinterSensorEntityDescription, ...] = (
     ),
     Dremel3DPrinterSensorEntityDescription(
         key="target_platform_temperature",
-        name="Target platform temperature",
+        translation_key="target_platform_temperature",
         device_class=SensorDeviceClass.TEMPERATURE,
         native_unit_of_measurement=UnitOfTemperature.CELSIUS,
         state_class=SensorStateClass.MEASUREMENT,
@@ -108,7 +108,7 @@ SENSOR_TYPES: tuple[Dremel3DPrinterSensorEntityDescription, ...] = (
     ),
     Dremel3DPrinterSensorEntityDescription(
         key="max_platform_temperature",
-        name="Max platform temperature",
+        translation_key="max_platform_temperature",
         device_class=SensorDeviceClass.TEMPERATURE,
         native_unit_of_measurement=UnitOfTemperature.CELSIUS,
         state_class=SensorStateClass.MEASUREMENT,
@@ -120,7 +120,7 @@ SENSOR_TYPES: tuple[Dremel3DPrinterSensorEntityDescription, ...] = (
     ),
     Dremel3DPrinterSensorEntityDescription(
         key=ATTR_EXTRUDER,
-        name="Extruder",
+        translation_key="extruder",
         device_class=SensorDeviceClass.TEMPERATURE,
         native_unit_of_measurement=UnitOfTemperature.CELSIUS,
         state_class=SensorStateClass.MEASUREMENT,
@@ -130,7 +130,7 @@ SENSOR_TYPES: tuple[Dremel3DPrinterSensorEntityDescription, ...] = (
     ),
     Dremel3DPrinterSensorEntityDescription(
         key="target_extruder_temperature",
-        name="Target extruder temperature",
+        translation_key="target_extruder_temperature",
         device_class=SensorDeviceClass.TEMPERATURE,
         native_unit_of_measurement=UnitOfTemperature.CELSIUS,
         state_class=SensorStateClass.MEASUREMENT,
@@ -142,7 +142,7 @@ SENSOR_TYPES: tuple[Dremel3DPrinterSensorEntityDescription, ...] = (
     ),
     Dremel3DPrinterSensorEntityDescription(
         key="max_extruder_temperature",
-        name="Max extruder temperature",
+        translation_key="max_extruder_temperature",
         device_class=SensorDeviceClass.TEMPERATURE,
         native_unit_of_measurement=UnitOfTemperature.CELSIUS,
         state_class=SensorStateClass.MEASUREMENT,
@@ -154,14 +154,14 @@ SENSOR_TYPES: tuple[Dremel3DPrinterSensorEntityDescription, ...] = (
     ),
     Dremel3DPrinterSensorEntityDescription(
         key="network_build",
-        name="Network build",
+        translation_key="network_build",
         entity_category=EntityCategory.DIAGNOSTIC,
         entity_registry_enabled_default=False,
         value_fn=lambda api, key: api.get_job_status()[key],
     ),
     Dremel3DPrinterSensorEntityDescription(
         key="filament",
-        name="Filament",
+        translation_key="filament",
         icon="mdi:printer-3d-nozzle",
         entity_category=EntityCategory.DIAGNOSTIC,
         entity_registry_enabled_default=False,
@@ -169,7 +169,7 @@ SENSOR_TYPES: tuple[Dremel3DPrinterSensorEntityDescription, ...] = (
     ),
     Dremel3DPrinterSensorEntityDescription(
         key="elapsed_time",
-        name="Elapsed time",
+        translation_key="elapsed_time",
         device_class=SensorDeviceClass.TIMESTAMP,
         entity_category=EntityCategory.DIAGNOSTIC,
         entity_registry_enabled_default=False,
@@ -181,7 +181,7 @@ SENSOR_TYPES: tuple[Dremel3DPrinterSensorEntityDescription, ...] = (
     ),
     Dremel3DPrinterSensorEntityDescription(
         key="estimated_total_time",
-        name="Estimated total time",
+        translation_key="estimated_total_time",
         device_class=SensorDeviceClass.TIMESTAMP,
         entity_category=EntityCategory.DIAGNOSTIC,
         entity_registry_enabled_default=False,
@@ -193,7 +193,7 @@ SENSOR_TYPES: tuple[Dremel3DPrinterSensorEntityDescription, ...] = (
     ),
     Dremel3DPrinterSensorEntityDescription(
         key="job_status",
-        name="Job status",
+        translation_key="job_status",
         icon="mdi:printer-3d",
         entity_category=EntityCategory.DIAGNOSTIC,
         entity_registry_enabled_default=False,
@@ -201,7 +201,7 @@ SENSOR_TYPES: tuple[Dremel3DPrinterSensorEntityDescription, ...] = (
     ),
     Dremel3DPrinterSensorEntityDescription(
         key="job_name",
-        name="Job name",
+        translation_key="job_name",
         icon="mdi:file",
         entity_category=EntityCategory.DIAGNOSTIC,
         entity_registry_enabled_default=False,
@@ -209,7 +209,7 @@ SENSOR_TYPES: tuple[Dremel3DPrinterSensorEntityDescription, ...] = (
     ),
     Dremel3DPrinterSensorEntityDescription(
         key="api_version",
-        name="API version",
+        translation_key="api_version",
         icon="mdi:api",
         entity_category=EntityCategory.DIAGNOSTIC,
         entity_registry_enabled_default=False,
@@ -217,7 +217,7 @@ SENSOR_TYPES: tuple[Dremel3DPrinterSensorEntityDescription, ...] = (
     ),
     Dremel3DPrinterSensorEntityDescription(
         key="host",
-        name="Host",
+        translation_key="host",
         icon="mdi:ip-network",
         entity_category=EntityCategory.DIAGNOSTIC,
         entity_registry_enabled_default=False,
@@ -225,7 +225,7 @@ SENSOR_TYPES: tuple[Dremel3DPrinterSensorEntityDescription, ...] = (
     ),
     Dremel3DPrinterSensorEntityDescription(
         key="connection_type",
-        name="Connection type",
+        translation_key="connection_type",
         icon="mdi:network",
         entity_category=EntityCategory.DIAGNOSTIC,
         entity_registry_enabled_default=False,
@@ -233,7 +233,7 @@ SENSOR_TYPES: tuple[Dremel3DPrinterSensorEntityDescription, ...] = (
     ),
     Dremel3DPrinterSensorEntityDescription(
         key="available_storage",
-        name="Available storage",
+        translation_key="available_storage",
         native_unit_of_measurement=UnitOfInformation.MEGABYTES,
         device_class=SensorDeviceClass.DATA_SIZE,
         entity_category=EntityCategory.DIAGNOSTIC,
@@ -242,7 +242,7 @@ SENSOR_TYPES: tuple[Dremel3DPrinterSensorEntityDescription, ...] = (
     ),
     Dremel3DPrinterSensorEntityDescription(
         key="hours_used",
-        name="Hours used",
+        translation_key="hours_used",
         icon="mdi:clock",
         native_unit_of_measurement=UnitOfTime.HOURS,
         device_class=SensorDeviceClass.DURATION,
@@ -267,7 +267,7 @@ async def async_setup_entry(
 
 
 class Dremel3DPrinterSensor(Dremel3DPrinterEntity, SensorEntity):
-    """Representation of an Dremel 3D Printer sensor."""
+    """Representation of a Dremel 3D Printer sensor."""
 
     entity_description: Dremel3DPrinterSensorEntityDescription
 
diff --git a/homeassistant/components/dremel_3d_printer/strings.json b/homeassistant/components/dremel_3d_printer/strings.json
index 64b95cbfd05..08d2a001d2d 100644
--- a/homeassistant/components/dremel_3d_printer/strings.json
+++ b/homeassistant/components/dremel_3d_printer/strings.json
@@ -14,5 +14,72 @@
       "cannot_connect": "[%key:common::config_flow::error::cannot_connect%]",
       "unknown": "[%key:common::config_flow::error::unknown%]"
     }
+  },
+  "entity": {
+    "sensor": {
+      "job_phase": {
+        "name": "Job phase"
+      },
+      "remaining_time": {
+        "name": "Remaining time"
+      },
+      "progress": {
+        "name": "Progress"
+      },
+      "chamber": {
+        "name": "Chamber"
+      },
+      "platform_temperature": {
+        "name": "Platform temperature"
+      },
+      "target_platform_temperature": {
+        "name": "Target platform temperature"
+      },
+      "max_platform_temperature": {
+        "name": "Max platform temperature"
+      },
+      "extruder": {
+        "name": "Extruder"
+      },
+      "target_extruder_temperature": {
+        "name": "Target extruder temperature"
+      },
+      "max_extruder_temperature": {
+        "name": "Max extruder temperature"
+      },
+      "network_build": {
+        "name": "Network build"
+      },
+      "filament": {
+        "name": "Filament"
+      },
+      "elapsed_time": {
+        "name": "Elapsed time"
+      },
+      "estimated_total_time": {
+        "name": "Estimated total time"
+      },
+      "job_status": {
+        "name": "Job status"
+      },
+      "job_name": {
+        "name": "Job name"
+      },
+      "api_version": {
+        "name": "API version"
+      },
+      "host": {
+        "name": "[%key:common::config_flow::data::host%]"
+      },
+      "connection_type": {
+        "name": "Connection type"
+      },
+      "available_storage": {
+        "name": "Available storage"
+      },
+      "hours_used": {
+        "name": "Hours used"
+      }
+    }
   }
 }