Remove deprecated Orange Pi GPIO integration (#67177)

.coveragerc

@@ -859,7 +859,6 @@ omit =
     homeassistant/components/openweathermap/weather_update_coordinator.py
     homeassistant/components/opnsense/*
     homeassistant/components/opple/light.py
-    homeassistant/components/orangepi_gpio/*
     homeassistant/components/oru/*
     homeassistant/components/orvibo/switch.py
     homeassistant/components/osramlightify/light.py

CODEOWNERS

@@ -689,7 +689,6 @@ homeassistant/components/openweathermap/* @fabaff @freekode @nzapponi
 tests/components/openweathermap/* @fabaff @freekode @nzapponi
 homeassistant/components/opnsense/* @mtreinish
 tests/components/opnsense/* @mtreinish
-homeassistant/components/orangepi_gpio/* @pascallj
 homeassistant/components/oru/* @bvlaicu
 homeassistant/components/overkiz/* @imicknl @vlebourl @tetienne
 tests/components/overkiz/* @imicknl @vlebourl @tetienne

homeassistant/components/orangepi_gpio/__init__.py

@@ -1,59 +0,0 @@
-"""Support for controlling GPIO pins of a Orange Pi."""
-import logging
-
-from OPi import GPIO
-
-from homeassistant.const import EVENT_HOMEASSISTANT_START, EVENT_HOMEASSISTANT_STOP
-from homeassistant.core import HomeAssistant
-from homeassistant.helpers.typing import ConfigType
-
-from .const import PIN_MODES
-
-_LOGGER = logging.getLogger(__name__)
-
-DOMAIN = "orangepi_gpio"
-
-
-async def async_setup(hass: HomeAssistant, config: ConfigType) -> bool:
-    """Set up the Orange Pi GPIO component."""
-    _LOGGER.warning(
-        "The Orange Pi GPIO integration is deprecated and will be removed "
-        "in Home Assistant Core 2022.4; this integration is removed under "
-        "Architectural Decision Record 0019, more information can be found here: "
-        "https://github.com/home-assistant/architecture/blob/master/adr/0019-GPIO.md"
-    )
-
-    def cleanup_gpio(event):
-        """Stuff to do before stopping."""
-        GPIO.cleanup()
-
-    def prepare_gpio(event):
-        """Stuff to do when Home Assistant starts."""
-        hass.bus.async_listen_once(EVENT_HOMEASSISTANT_STOP, cleanup_gpio)
-
-    hass.bus.async_listen_once(EVENT_HOMEASSISTANT_START, prepare_gpio)
-    return True
-
-
-def setup_mode(mode):
-    """Set GPIO pin mode."""
-    _LOGGER.debug("Setting GPIO pin mode as %s", PIN_MODES[mode])
-    GPIO.setmode(PIN_MODES[mode])
-
-
-def setup_input(port):
-    """Set up a GPIO as input."""
-    _LOGGER.debug("Setting up GPIO pin %i as input", port)
-    GPIO.setup(port, GPIO.IN)
-
-
-def read_input(port):
-    """Read a value from a GPIO."""
-    _LOGGER.debug("Reading GPIO pin %i", port)
-    return GPIO.input(port)
-
-
-def edge_detect(port, event_callback):
-    """Add detection for RISING and FALLING events."""
-    _LOGGER.debug("Add callback for GPIO pin %i", port)
-    GPIO.add_event_detect(port, GPIO.BOTH, callback=event_callback)

homeassistant/components/orangepi_gpio/binary_sensor.py

@@ -1,77 +0,0 @@
-"""Support for binary sensor using Orange Pi GPIO."""
-from __future__ import annotations
-
-from homeassistant.components.binary_sensor import PLATFORM_SCHEMA, BinarySensorEntity
-from homeassistant.core import HomeAssistant
-from homeassistant.helpers.entity_platform import AddEntitiesCallback
-from homeassistant.helpers.typing import ConfigType, DiscoveryInfoType
-
-from . import edge_detect, read_input, setup_input, setup_mode
-from .const import CONF_INVERT_LOGIC, CONF_PIN_MODE, CONF_PORTS, PORT_SCHEMA
-
-PLATFORM_SCHEMA = PLATFORM_SCHEMA.extend(PORT_SCHEMA)
-
-
-async def async_setup_platform(
-    hass: HomeAssistant,
-    config: ConfigType,
-    async_add_entities: AddEntitiesCallback,
-    discovery_info: DiscoveryInfoType | None = None,
-) -> None:
-    """Set up the Orange Pi GPIO platform."""
-    binary_sensors = []
-    invert_logic = config[CONF_INVERT_LOGIC]
-    pin_mode = config[CONF_PIN_MODE]
-    ports = config[CONF_PORTS]
-
-    setup_mode(pin_mode)
-
-    for port_num, port_name in ports.items():
-        binary_sensors.append(
-            OPiGPIOBinarySensor(hass, port_name, port_num, invert_logic)
-        )
-    async_add_entities(binary_sensors)
-
-
-class OPiGPIOBinarySensor(BinarySensorEntity):
-    """Represent a binary sensor that uses Orange Pi GPIO."""
-
-    def __init__(self, hass, name, port, invert_logic):
-        """Initialize the Orange Pi binary sensor."""
-        self._name = name
-        self._port = port
-        self._invert_logic = invert_logic
-        self._state = None
-
-    async def async_added_to_hass(self):
-        """Run when entity about to be added to hass."""
-
-        def gpio_edge_listener(port):
-            """Update GPIO when edge change is detected."""
-            self.schedule_update_ha_state(True)
-
-        def setup_entity():
-            setup_input(self._port)
-            edge_detect(self._port, gpio_edge_listener)
-            self.schedule_update_ha_state(True)
-
-        await self.hass.async_add_executor_job(setup_entity)
-
-    @property
-    def should_poll(self):
-        """No polling needed."""
-        return False
-
-    @property
-    def name(self):
-        """Return the name of the sensor."""
-        return self._name
-
-    @property
-    def is_on(self):
-        """Return the state of the entity."""
-        return self._state != self._invert_logic
-
-    def update(self):
-        """Update state with new GPIO data."""
-        self._state = read_input(self._port)

homeassistant/components/orangepi_gpio/const.py

@@ -1,59 +0,0 @@
-"""Constants for Orange Pi GPIO."""
-
-from nanopi import duo, neocore2
-from orangepi import (
-    lite,
-    lite2,
-    one,
-    oneplus,
-    pc,
-    pc2,
-    pcplus,
-    pi3,
-    pi4,
-    pi4B,
-    plus2e,
-    prime,
-    r1,
-    winplus,
-    zero,
-    zeroplus,
-    zeroplus2,
-)
-import voluptuous as vol
-
-from homeassistant.helpers import config_validation as cv
-
-CONF_INVERT_LOGIC = "invert_logic"
-CONF_PIN_MODE = "pin_mode"
-CONF_PORTS = "ports"
-DEFAULT_INVERT_LOGIC = False
-PIN_MODES = {
-    "duo": duo.BOARD,
-    "lite": lite.BOARD,
-    "lite2": lite2.BOARD,
-    "neocore2": neocore2.BOARD,
-    "one": one.BOARD,
-    "oneplus": oneplus.BOARD,
-    "pc": pc.BOARD,
-    "pc2": pc2.BOARD,
-    "pcplus": pcplus.BOARD,
-    "pi3": pi3.BOARD,
-    "pi4": pi4.BOARD,
-    "pi4B": pi4B.BOARD,
-    "plus2e": plus2e.BOARD,
-    "prime": prime.BOARD,
-    "r1": r1.BOARD,
-    "winplus": winplus.BOARD,
-    "zero": zero.BOARD,
-    "zeroplus": zeroplus.BOARD,
-    "zeroplus2": zeroplus2.BOARD,
-}
-
-_SENSORS_SCHEMA = vol.Schema({cv.positive_int: cv.string})
-
-PORT_SCHEMA = {
-    vol.Required(CONF_PORTS): _SENSORS_SCHEMA,
-    vol.Required(CONF_PIN_MODE): vol.In(PIN_MODES.keys()),
-    vol.Optional(CONF_INVERT_LOGIC, default=DEFAULT_INVERT_LOGIC): cv.boolean,
-}

homeassistant/components/orangepi_gpio/manifest.json

@@ -1,9 +0,0 @@
-{
-  "domain": "orangepi_gpio",
-  "name": "Orange Pi GPIO",
-  "documentation": "https://www.home-assistant.io/integrations/orangepi_gpio",
-  "requirements": ["OPi.GPIO==0.5.2"],
-  "codeowners": ["@pascallj"],
-  "iot_class": "local_push",
-  "loggers": ["OPi", "nanopi", "orangepi"]
-}

requirements_all.txt

@@ -19,9 +19,6 @@ HAP-python==4.4.0
 # homeassistant.components.mastodon
 Mastodon.py==1.5.1
 
-# homeassistant.components.orangepi_gpio
-OPi.GPIO==0.5.2
-
 # homeassistant.components.flick_electric
 PyFlick==0.0.2