[ci skip] Translation update

homeassistant/components/binary_sensor/translations/lt.json

@@ -1,4 +1,14 @@
 {
+    "device_automation": {
+        "condition_type": {
+            "is_motion": "{entity_name} aptiko judes\u012f",
+            "is_no_motion": "{entity_name} judesio n\u0117ra"
+        },
+        "trigger_type": {
+            "motion": "{entity_name} prad\u0117jo aptikti judes\u012f",
+            "no_motion": "{entity_name} nustojo aptikti judes\u012f"
+        }
+    },
     "state": {
         "_": {
             "off": "I\u0161jungta",

homeassistant/components/braviatv/translations/ca.json

@@ -19,12 +19,26 @@
                     "pin": "Codi PIN",
                     "use_psk": "Utilitza autenticaci\u00f3 PSK"
                 },
-                "description": "Introdueix el codi PIN que es mostra al televisor Sony Bravia.\n\nSi no es mostra el codi, has d'eliminar Home Assistant del teu televisor. V\u00e9s a: Configuraci\u00f3 -> Xarxa -> Configuraci\u00f3 de dispositiu remot -> Elimina dispositiu remot.\n\nPots utilitzar una clau PSK (Pre-Shared-Key) enlloc d'un codi PIN. La clau PSK est\u00e0 definida per l'usuari i s'utilitza per al control d'acc\u00e9s. Es recomana aquest m\u00e8tode d'autenticaci\u00f3, ja que \u00e9s m\u00e9s estable. Per activar la clau PSK, v\u00e9s a: Configuraci\u00f3 -> Xarxa -> Configuraci\u00f3 de xarxa local -> Control IP. Tot seguit, marca la casella \u00abUtilitza autenticaci\u00f3 PSK\u00bb i introdueix la clau que desitgis enlloc del PIN.",
+                "description": "Assegureu-vos que teniu habilitada l'opci\u00f3 \u00abControl Remot\u00bb al vostre aparell de TV; per fer-ho aneu a: Configuraci\u00f3 -> Xarxa -> Configuraci\u00f3 de dispositiu remot -> Control remot.\n\nHi ha dos m\u00e8todes d'autenticaci\u00f3: Codi PIN o PSK (Pre-Shared-Key). L'autorizaci\u00f3 via PSK \u00e9s la recomanada perqu\u00e8 \u00e9s m\u00e9s estable.",
                 "title": "Autoritzaci\u00f3 del televisor Sony Bravia"
             },
             "confirm": {
                 "description": "Vols comen\u00e7ar la configuraci\u00f3?"
             },
+            "pin": {
+                "data": {
+                    "pin": "Codi PIN"
+                },
+                "description": "Introdu\u00efu el codi PIN que es mostra a la TV Sony Bravia.\n\nSi el codi PIN no es mostra, haureu d'eliminar el registre del Home Assistant del vostre aparell de TV; aneu a: Configuraci\u00f3 -> Xarxa -> Par\u00e0metres del dispositiu remot -> Elimina el registre del dispositiu remot.",
+                "title": "Autoritza la TV Sony Bravia"
+            },
+            "psk": {
+                "data": {
+                    "pin": "PSK"
+                },
+                "description": "Per tal d'establir la PSK a la vostra TV, aneu a: Configuraci\u00f3 -> Xarxa -> Configuraci\u00f3 de la Xarxa Local -> Control de la IP. Establiu l'\u00abAutenticaci\u00f3\u00bb a \u00abNormal i Clau Pre-Compartida\u00ab o b\u00e9 \u00abClau Pre-Compartida\u00bb i definiu la vostra Clau (p.ex.: sony)",
+                "title": "Autoritza la TV Sony Bravia"
+            },
             "reauth_confirm": {
                 "data": {
                     "pin": "Codi PIN",

homeassistant/components/braviatv/translations/de.json

@@ -19,12 +19,26 @@
                     "pin": "PIN-Code",
                     "use_psk": "PSK-Authentifizierung verwenden"
                 },
-                "description": "Gib den auf dem Sony Bravia-Fernseher angezeigten PIN-Code ein. \n\nWenn der PIN-Code nicht angezeigt wird, musst du die Registrierung von Home Assistant auf deinem Fernseher aufheben, gehe zu: Einstellungen \u2192 Netzwerk \u2192 Remote-Ger\u00e4teeinstellungen \u2192 Remote-Ger\u00e4t abmelden. \n\nDu kannst PSK (Pre-Shared-Key) anstelle der PIN verwenden. PSK ist ein benutzerdefinierter geheimer Schl\u00fcssel, der f\u00fcr die Zugriffskontrolle verwendet wird. Diese Authentifizierungsmethode wird als stabiler empfohlen. Um PSK auf deinem Fernseher zu aktivieren, gehe zu: Einstellungen \u2192 Netzwerk \u2192 Heimnetzwerk-Setup \u2192 IP-Steuerung. Aktiviere dann das Kontrollk\u00e4stchen \u00abPSK-Authentifizierung verwenden\u00bb und gib deinen PSK anstelle der PIN ein.",
+                "description": "Vergewissere dich, dass \"Fernsteuerung\" auf deinem Fernsehger\u00e4t aktiviert ist, gehe zu: \nEinstellungen -> Netzwerk -> Einstellungen f\u00fcr Fernbedienungsger\u00e4te -> Fernsteuerung. \n\nEs gibt zwei Autorisierungsmethoden: PIN-Code oder PSK (Pre-Shared Key). \nDie Autorisierung \u00fcber PSK wird empfohlen, da sie stabiler ist.",
                 "title": "Autorisiere Sony Bravia TV"
             },
             "confirm": {
                 "description": "M\u00f6chtest Du mit der Einrichtung beginnen?"
             },
+            "pin": {
+                "data": {
+                    "pin": "PIN-Code"
+                },
+                "description": "Gib den auf dem Sony Bravia TV angezeigten PIN-Code ein. \n\nWenn der PIN-Code nicht angezeigt wird, musst du die Registrierung des Home Assistant auf deinem Fernsehger\u00e4t aufheben, indem du zu Einstellungen -> Netzwerk -> Einstellungen f\u00fcr Fernbedienungsger\u00e4te -> Deregistrierung des Fernbedienungsger\u00e4ts gehst.",
+                "title": "Sony Bravia TV autorisieren"
+            },
+            "psk": {
+                "data": {
+                    "pin": "PSK"
+                },
+                "description": "Um PSK auf deinem Fernseher einzurichten, gehe zu: Einstellungen -> Netzwerk -> Heimnetzwerk-Setup -> IP-Steuerung. Stelle \"Authentifizierung\" auf \"Normal und Pre-Shared Key\" oder \"Pre-Shared Key\" und definiere deine Pre-Shared-Key-Zeichenfolge (z. B. sony). \n\nGib dann hier deinen PSK ein.",
+                "title": "Sony Bravia TV autorisieren"
+            },
             "reauth_confirm": {
                 "data": {
                     "pin": "PIN-Code",

homeassistant/components/braviatv/translations/el.json

@@ -25,6 +25,20 @@
             "confirm": {
                 "description": "\u0398\u03ad\u03bb\u03b5\u03c4\u03b5 \u03bd\u03b1 \u03be\u03b5\u03ba\u03b9\u03bd\u03ae\u03c3\u03b5\u03c4\u03b5 \u03c4\u03b7 \u03c1\u03cd\u03b8\u03bc\u03b9\u03c3\u03b7;"
             },
+            "pin": {
+                "data": {
+                    "pin": "\u039a\u03c9\u03b4\u03b9\u03ba\u03cc\u03c2 PIN"
+                },
+                "description": "\u0395\u03b9\u03c3\u03b1\u03b3\u03ac\u03b3\u03b5\u03c4\u03b5 \u03c4\u03bf\u03bd \u03ba\u03c9\u03b4\u03b9\u03ba\u03cc PIN \u03c0\u03bf\u03c5 \u03b5\u03bc\u03c6\u03b1\u03bd\u03af\u03b6\u03b5\u03c4\u03b1\u03b9 \u03c3\u03c4\u03b7\u03bd \u03c4\u03b7\u03bb\u03b5\u03cc\u03c1\u03b1\u03c3\u03b7 Sony Bravia. \n\n \u0395\u03ac\u03bd \u03b4\u03b5\u03bd \u03b5\u03bc\u03c6\u03b1\u03bd\u03af\u03b6\u03b5\u03c4\u03b1\u03b9 \u03bf \u03ba\u03c9\u03b4\u03b9\u03ba\u03cc\u03c2 PIN, \u03c0\u03c1\u03ad\u03c0\u03b5\u03b9 \u03bd\u03b1 \u03ba\u03b1\u03c4\u03b1\u03c1\u03b3\u03ae\u03c3\u03b5\u03c4\u03b5 \u03c4\u03b7\u03bd \u03b5\u03b3\u03b3\u03c1\u03b1\u03c6\u03ae \u03c4\u03bf\u03c5 Home Assistant \u03c3\u03c4\u03b7\u03bd \u03c4\u03b7\u03bb\u03b5\u03cc\u03c1\u03b1\u03c3\u03ae \u03c3\u03b1\u03c2, \u03bc\u03b5\u03c4\u03b1\u03b2\u03b5\u03af\u03c4\u03b5 \u03c3\u03c4\u03bf: \u03a1\u03c5\u03b8\u03bc\u03af\u03c3\u03b5\u03b9\u03c2 - > \u0394\u03af\u03ba\u03c4\u03c5\u03bf - > \u03a1\u03c5\u03b8\u03bc\u03af\u03c3\u03b5\u03b9\u03c2 \u03b1\u03c0\u03bf\u03bc\u03b1\u03ba\u03c1\u03c5\u03c3\u03bc\u03ad\u03bd\u03b7\u03c2 \u03c3\u03c5\u03c3\u03ba\u03b5\u03c5\u03ae\u03c2 - > \u039a\u03b1\u03c4\u03ac\u03c1\u03b3\u03b7\u03c3\u03b7 \u03b5\u03b3\u03b3\u03c1\u03b1\u03c6\u03ae\u03c2 \u03b1\u03c0\u03bf\u03bc\u03b1\u03ba\u03c1\u03c5\u03c3\u03bc\u03ad\u03bd\u03b7\u03c2 \u03c3\u03c5\u03c3\u03ba\u03b5\u03c5\u03ae\u03c2.",
+                "title": "\u0395\u03be\u03bf\u03c5\u03c3\u03b9\u03bf\u03b4\u03cc\u03c4\u03b7\u03c3\u03b7 Sony Bravia TV"
+            },
+            "psk": {
+                "data": {
+                    "pin": "PSK"
+                },
+                "description": "\u0393\u03b9\u03b1 \u03bd\u03b1 \u03c1\u03c5\u03b8\u03bc\u03af\u03c3\u03b5\u03c4\u03b5 \u03c4\u03bf PSK \u03c3\u03c4\u03b7\u03bd \u03c4\u03b7\u03bb\u03b5\u03cc\u03c1\u03b1\u03c3\u03ae \u03c3\u03b1\u03c2, \u03bc\u03b5\u03c4\u03b1\u03b2\u03b5\u03af\u03c4\u03b5 \u03c3\u03c4\u03b9\u03c2 \u03b5\u03be\u03ae\u03c2 \u03b5\u03c0\u03b9\u03bb\u03bf\u03b3\u03ad\u03c2: \u03a1\u03c5\u03b8\u03bc\u03af\u03c3\u03b5\u03b9\u03c2 - > \u0394\u03af\u03ba\u03c4\u03c5\u03bf - > \u03a1\u03cd\u03b8\u03bc\u03b9\u03c3\u03b7 \u03bf\u03b9\u03ba\u03b9\u03b1\u03ba\u03bf\u03cd \u03b4\u03b9\u03ba\u03c4\u03cd\u03bf\u03c5 - > \u0388\u03bb\u03b5\u03b3\u03c7\u03bf\u03c2 IP. \u039f\u03c1\u03af\u03c3\u03c4\u03b5 \u03c4\u03bf \u00abAuthentication\u00bb \u03c3\u03b5 \u00abNormal and Pre-Shared Key\u00bb \u03ae \u00abPre-Shared Key\u00bb \u03ba\u03b1\u03b9 \u03bf\u03c1\u03af\u03c3\u03c4\u03b5 \u03c4\u03b7 \u03c3\u03c5\u03bc\u03b2\u03bf\u03bb\u03bf\u03c3\u03b5\u03b9\u03c1\u03ac \u03c3\u03b1\u03c2 Pre-Shared-Key (\u03c0.\u03c7. sony). \n\n \u03a3\u03c4\u03b7 \u03c3\u03c5\u03bd\u03ad\u03c7\u03b5\u03b9\u03b1, \u03b5\u03b9\u03c3\u03ac\u03b3\u03b5\u03c4\u03b5 \u03c4\u03bf PSK \u03c3\u03b1\u03c2 \u03b5\u03b4\u03ce.",
+                "title": "\u0395\u03be\u03bf\u03c5\u03c3\u03b9\u03bf\u03b4\u03cc\u03c4\u03b7\u03c3\u03b7 Sony Bravia TV"
+            },
             "reauth_confirm": {
                 "data": {
                     "pin": "\u039a\u03c9\u03b4\u03b9\u03ba\u03cc\u03c2 PIN",

homeassistant/components/braviatv/translations/en.json

@@ -4,7 +4,8 @@
             "already_configured": "Device is already configured",
             "no_ip_control": "IP Control is disabled on your TV or the TV is not supported.",
             "not_bravia_device": "The device is not a Bravia TV.",
-            "reauth_successful": "Re-authentication was successful"
+            "reauth_successful": "Re-authentication was successful",
+            "reauth_unsuccessful": "Re-authentication was unsuccessful, please remove the integration and set it up again."
         },
         "error": {
             "cannot_connect": "Failed to connect",
@@ -15,6 +16,7 @@
         "step": {
             "authorize": {
                 "data": {
+                    "pin": "PIN Code",
                     "use_psk": "Use PSK authentication"
                 },
                 "description": "Make sure that \u00abControl remotely\u00bb is enabled on your TV, go to: \nSettings -> Network -> Remote device settings -> Control remotely. \n\nThere are two authorization methods: PIN code or PSK (Pre-Shared Key). \nAuthorization via PSK is recommended as more stable.",
@@ -37,6 +39,13 @@
                 "description": "To set up PSK on your TV, go to: Settings -> Network -> Home Network Setup -> IP Control. Set \u00abAuthentication\u00bb to \u00abNormal and Pre-Shared Key\u00bb or \u00abPre-Shared Key\u00bb and define your Pre-Shared-Key string (e.g. sony). \n\nThen enter your PSK here.",
                 "title": "Authorize Sony Bravia TV"
             },
+            "reauth_confirm": {
+                "data": {
+                    "pin": "PIN Code",
+                    "use_psk": "Use PSK authentication"
+                },
+                "description": "Enter the PIN code shown on the Sony Bravia TV. \n\nIf the PIN code is not shown, you have to unregister Home Assistant on your TV, go to: Settings -> Network -> Remote device settings -> Deregister remote device. \n\nYou can use PSK (Pre-Shared-Key) instead of PIN. PSK is a user-defined secret key used for access control. This authentication method is recommended as more stable. To enable PSK on your TV, go to: Settings -> Network -> Home Network Setup -> IP Control. Then check \u00abUse PSK authentication\u00bb box and enter your PSK instead of PIN."
+            },
             "user": {
                 "data": {
                     "host": "Host"

homeassistant/components/braviatv/translations/es.json

@@ -19,12 +19,26 @@
                     "pin": "C\u00f3digo PIN",
                     "use_psk": "Usar autenticaci\u00f3n PSK"
                 },
-                "description": "Introduce el c\u00f3digo PIN que se muestra en la TV Sony Bravia. \n\nSi no se muestra el c\u00f3digo PIN, debes cancelar el registro de Home Assistant en tu TV, ve a: Configuraci\u00f3n - > Red - > Configuraci\u00f3n del dispositivo remoto - > Cancelar el registro del dispositivo remoto. \n\nPuedes usar PSK (clave precompartida) en lugar de PIN. PSK es una clave secreta definida por el usuario que se utiliza para el control de acceso. Este m\u00e9todo de autenticaci\u00f3n se recomienda como m\u00e1s estable. Para habilitar PSK en tu TV, ve a: Configuraci\u00f3n - > Red - > Configuraci\u00f3n de red dom\u00e9stica - > Control de IP. Luego marca la casilla \u00abUsar autenticaci\u00f3n PSK\u00bb e introduce tu PSK en lugar de PIN.",
+                "description": "Aseg\u00farate de que \u00abControlar de forma remota\u00bb est\u00e9 habilitado en tu televisor, ve a:\nConfiguraci\u00f3n -> Red -> Configuraci\u00f3n de dispositivo remoto -> Controlar de forma remota. \n\nHay dos m\u00e9todos de autorizaci\u00f3n: c\u00f3digo PIN o PSK (clave precompartida).\nSe recomienda la autorizaci\u00f3n a trav\u00e9s de PSK ya que es m\u00e1s estable.",
                 "title": "Autorizar Sony Bravia TV"
             },
             "confirm": {
                 "description": "\u00bfQuieres iniciar la configuraci\u00f3n?"
             },
+            "pin": {
+                "data": {
+                    "pin": "C\u00f3digo PIN"
+                },
+                "description": "Introduce el c\u00f3digo PIN que se muestra en Sony Bravia TV. \n\nSi no se muestra el c\u00f3digo PIN, debes cancelar el registro de Home Assistant en tu TV, ve a: Configuraci\u00f3n - > Red - > Configuraci\u00f3n del dispositivo remoto - > Cancelar el registro del dispositivo remoto.",
+                "title": "Autorizar Sony Bravia TV"
+            },
+            "psk": {
+                "data": {
+                    "pin": "PSK"
+                },
+                "description": "Para configurar PSK en tu televisor, ve a: Configuraci\u00f3n -> Red -> Configuraci\u00f3n de red dom\u00e9stica -> Control de IP. Establece \u00abAutenticaci\u00f3n\u00bb en \u00abClave normal y precompartida\u00bb o \u00abClave precompartida\u00bb y define tu cadena de clave precompartida (p. ej., sony). \nA continuaci\u00f3n introduce tu PSK aqu\u00ed.",
+                "title": "Autorizar Sony Bravia TV"
+            },
             "reauth_confirm": {
                 "data": {
                     "pin": "C\u00f3digo PIN",

homeassistant/components/braviatv/translations/et.json

@@ -19,12 +19,26 @@
                     "pin": "PIN kood",
                     "use_psk": "PSK autentimise kasutamine"
                 },
-                "description": "Sisestage Sony Bravia teleril n\u00e4idatud PIN-kood. \n\nKui PIN-koodi ei kuvata, peate teleril Home Assistant'i registreerimise t\u00fchistama, minge aadressile: Seaded -> Network -> Remote device settings -> Deregister remote device. \n\nPIN-koodi asemel v\u00f5ite kasutada PSK (Pre-Shared-Key). PSK on kasutaja m\u00e4\u00e4ratud salajane v\u00f5ti, mida kasutatakse juurdep\u00e4\u00e4su kontrollimiseks. See autentimismeetod on soovitatav kui stabiilsem. PSK lubamiseks teleril minge aadressil: Settings -> Network -> Home Network Setup -> IP Control. Seej\u00e4rel m\u00e4rgistage ruut \"Kasutage PSK autentimist\" ja sisestage PIN-koodi asemel PSK.",
+                "description": "Veendu, et \"Kaugjuhtimine\" on  teleril lubatud, mine aadressil: \nSeaded -> Network -> Remote device settings -> Control remotely. \n\nOn kaks autoriseerimismeetodit: PIN-kood v\u00f5i PSK (Pre-Shared Key). \nAutoriseerimine PSK kaudu on soovitatav kui stabiilsem.",
                 "title": "Sony Bravia TV autoriseerimine"
             },
             "confirm": {
                 "description": "Kas alustada seadistamist?"
             },
+            "pin": {
+                "data": {
+                    "pin": "PIN kood"
+                },
+                "description": "Sisesta Sony Bravia teleris kuvatav PIN-kood. \n\n Kui PIN-koodi ei kuvata, pead oma teleris Home Assistanti registreerimise t\u00fchistama. Avag: Seaded - > V\u00f5rk - > Kaugseadme seaded - > T\u00fchista kaugseadme registreerimine.",
+                "title": "Sony Bravia TV autoriseerimine"
+            },
+            "psk": {
+                "data": {
+                    "pin": "PSK"
+                },
+                "description": "PSK seadistamiseks teleris ava: Seaded - > V\u00f5rk - > Koduv\u00f5rgu h\u00e4\u00e4lestus - > IP-juhtimine. M\u00e4\u00e4ra \"Authentication\" v\u00e4\u00e4rtuseks \"Tavaline ja eeljagatud v\u00f5ti\" v\u00f5i \"Eeljagatud v\u00f5ti\" ja m\u00e4\u00e4ra oma eeljagatud v\u00f5tme string (nt sony). \n\n Seej\u00e4rel sisesta siia oma PSK.",
+                "title": "Sony Bravia TV autoriseerimine"
+            },
             "reauth_confirm": {
                 "data": {
                     "pin": "PIN kood",

homeassistant/components/braviatv/translations/nl.json

@@ -24,6 +24,12 @@
             "confirm": {
                 "description": "Wil je beginnen met instellen?"
             },
+            "pin": {
+                "title": "Autoriseer Sony Bravia TV"
+            },
+            "psk": {
+                "title": "Autoriseer Sony Bravia TV"
+            },
             "reauth_confirm": {
                 "data": {
                     "pin": "Pincode",

homeassistant/components/braviatv/translations/sk.json

@@ -19,12 +19,26 @@
                     "pin": "PIN k\u00f3d",
                     "use_psk": "Pou\u017eite autentifik\u00e1ciu PSK"
                 },
-                "description": "Zadajte PIN k\u00f3d zobrazen\u00fd na telev\u00edzii Sony Bravia.\n\nPokia\u013e sa PIN k\u00f3d nezobraz\u00ed, je potrebn\u00e9 zru\u0161i\u0165 registr\u00e1ciu Home Assistant na telev\u00edzii, prejdite na: Nastavenia -> Sie\u0165 -> Nastavenie vzdialen\u00e9ho zariadenia -> Zru\u0161i\u0165 registr\u00e1ciu vzdialen\u00e9ho zariadenia.",
+                "description": "Uistite sa, \u017ee je na va\u0161om telev\u00edzore aktivovan\u00e9 \u201eOvl\u00e1danie na dia\u013eku\u201c, prejdite na:\n Nastavenia - > Sie\u0165 - > Nastavenia vzdialen\u00e9ho zariadenia - > Ovl\u00e1da\u0165 na dia\u013eku. \n\n Existuj\u00fa dva sp\u00f4soby autoriz\u00e1cie: PIN k\u00f3d alebo PSK (Pre-Shared Key).\n Ako stabilnej\u0161ia sa odpor\u00fa\u010da autoriz\u00e1cia cez PSK.",
                 "title": "Autorizujte telev\u00edzor Sony Bravia"
             },
             "confirm": {
                 "description": "Chcete za\u010da\u0165 nastavova\u0165?"
             },
+            "pin": {
+                "data": {
+                    "pin": "PIN k\u00f3d"
+                },
+                "description": "Zadajte k\u00f3d PIN zobrazen\u00fd na telev\u00edzore Sony Bravia. \n\n Ak sa k\u00f3d PIN nezobrazuje, mus\u00edte zru\u0161i\u0165 registr\u00e1ciu aplik\u00e1cie Home Assistant na telev\u00edzore, prejdite na: Nastavenia - > Sie\u0165 - > Nastavenia vzdialen\u00e9ho zariadenia - > Zru\u0161te registr\u00e1ciu vzdialen\u00e9ho zariadenia.",
+                "title": "Autorizujte telev\u00edzor Sony Bravia"
+            },
+            "psk": {
+                "data": {
+                    "pin": "PSK"
+                },
+                "description": "Ak chcete nastavi\u0165 PSK na svojom telev\u00edzore, prejdite na: Nastavenia - > Sie\u0165 - > Nastavenie dom\u00e1cej siete - > Ovl\u00e1danie IP. Nastavte \u00abAuthentication\u00bb na \u00abNormal and Pre-Shared Key\u00bb alebo \u00abPre-Shared Key\u00bb a definujte svoj re\u0165azec pre-Shared-Key (napr. Sony). \n\n Tu zadajte svoje PSK.",
+                "title": "Autorizujte telev\u00edzor Sony Bravia"
+            },
             "reauth_confirm": {
                 "data": {
                     "pin": "PIN k\u00f3d",

homeassistant/components/climate/translations/ca.json

@@ -41,7 +41,7 @@
                 "state": {
                     "auto": "Autom\u00e0tic",
                     "diffuse": "Dif\u00fas",
-                    "focus": "Enfocament",
+                    "focus": "Enfocat",
                     "high": "Alt",
                     "low": "Baix",
                     "medium": "Mitj\u00e0",
@@ -65,17 +65,17 @@
                     "fan": "Ventilador",
                     "heating": "Escalfant",
                     "idle": "Inactiu",
-                    "off": "OFF"
+                    "off": "Apagat"
                 }
             },
             "hvac_modes": {
                 "name": "Modes HVAC"
             },
             "max_humidity": {
-                "name": "Humitat m\u00e0xima objectiu"
+                "name": "Humitat objectiu m\u00e0xima"
             },
             "max_temp": {
-                "name": "Temperatura m\u00e0xima objectiu"
+                "name": "Temperatura objectiu m\u00e0xima"
             },
             "min_humidity": {
                 "name": "Humitat objectiu m\u00ednima"

homeassistant/components/climate/translations/lt.json

@@ -58,8 +58,37 @@
             "max_humidity": {
                 "name": "Maksimali tikslin\u0117 dr\u0117gm\u0117"
             },
-            "swing_mode": {
+            "max_temp": {
+                "name": "Maksimali tikslin\u0117 temperat\u016bra"
+            },
+            "min_humidity": {
+                "name": "Minimali tikslin\u0117 dr\u0117gm\u0117"
+            },
+            "min_temp": {
+                "name": "Minimali tikslin\u0117 temperat\u016bra"
+            },
+            "preset_mode": {
+                "name": "I\u0161 anksto nustatytas",
                 "state": {
+                    "activity": "Veikla",
+                    "away": "I\u0161vyk\u0119s",
+                    "boost": "Laikinai  padidinti",
+                    "comfort": "Komfortas",
+                    "eco": "Eko",
+                    "home": "Namuose",
+                    "none": "Joks",
+                    "sleep": "Miego"
+                }
+            },
+            "preset_modes": {
+                "name": "I\u0161 anksto nustatyti"
+            },
+            "swing_mode": {
+                "name": "Sukiojimo re\u017eimas",
+                "state": {
+                    "both": "Abu",
+                    "horizontal": "Horizontali",
+                    "off": "I\u0161jungta",
                     "on": "\u012ejungta",
                     "vertical": "Vertikalus"
                 }

homeassistant/components/demo/translations/ca.json

@@ -5,10 +5,10 @@
                 "state_attributes": {
                     "fan_mode": {
                         "state": {
-                            "auto_high": "Autom\u00e0tic alt",
+                            "auto_high": "Autom\u00e0tic (alt)",
-                            "auto_low": "Autom\u00e0tic baix",
+                            "auto_low": "Autom\u00e0tic (baix)",
-                            "on_high": "ON alt",
+                            "on_high": "Engegat (alt)",
-                            "on_low": "ON baix"
+                            "on_low": "Engegat (baix)"
                         }
                     },
                     "swing_mode": {
@@ -17,7 +17,7 @@
                             "2": "2",
                             "3": "3",
                             "auto": "Autom\u00e0tic",
-                            "off": "OFF"
+                            "off": "Desactivat"
                         }
                     }
                 }
@@ -27,7 +27,7 @@
             "speed": {
                 "state": {
                     "light_speed": "Velocitat de la llum",
-                    "ludicrous_speed": "Velocitat Ludicrous",
+                    "ludicrous_speed": "Velocitat insensata",
                     "ridiculous_speed": "Velocitat rid\u00edcula"
                 }
             }

homeassistant/components/google_assistant_sdk/translations/ca.json

@@ -1,6 +1,6 @@
 {
     "application_credentials": {
-        "description": "Segueix les [instruccions]({more_info_url}) de [la pantalla de consentiment OAuth]({oauth_consent_url}) perqu\u00e8 Home Assistant tingui acc\u00e9s als teu Google Assistant SDK. Tamb\u00e9 has de crear les credencials d'aplicaci\u00f3 enlla\u00e7ades al teu compte:\n 1. V\u00e9s a [Credencials]({oauth_creds_url}) i fes clic a **Crear credencials**.\n 2. A la llista desplegable, selecciona **ID de client OAuth**.\n 3. Selecciona **Aplicaci\u00f3 Web** al tipus d'aplicaci\u00f3.\n \n "
+        "description": "Seguiu les [instruccions]({more_info_url}) de [la pantalla de consentiment OAuth]({oauth_consent_url}) perqu\u00e8 Home Assistant tingui acc\u00e9s al vostre Google Assistant SDK. Tamb\u00e9 heu de crear les credencials d'aplicaci\u00f3 enlla\u00e7ades al vostre compte:\n 1. Aneu a [Credencials]({oauth_creds_url}) i feu clic a **Crear credencials**.\n 2. A la llista desplegable, seleccioneu **ID de client OAuth**.\n 3. Seleccioneu **Aplicaci\u00f3 Web** al tipus d'aplicaci\u00f3.\n \n "
     },
     "config": {
         "abort": {

homeassistant/components/homewizard/translations/ca.json

@@ -9,8 +9,8 @@
             "unknown_error": "Error inesperat"
         },
         "error": {
-            "api_not_enabled": "L'API no est\u00e0 activada. Activa-la a la configuraci\u00f3 de l'aplicaci\u00f3 HomeWizard Energy",
+            "api_not_enabled": "L'API no est\u00e0 activada. Activeu-la a la configuraci\u00f3 de l'aplicaci\u00f3 HomeWizard Energy",
-            "network_error": "Dispositiu inaccessible, assegura't que has introdu\u00eft l'adre\u00e7a IP correcta i que el dispositiu est\u00e0 disponible a la xarxa"
+            "network_error": "El dispositiu \u00e9s inaccessible, assegureu-vos que heu introdu\u00eft l'adre\u00e7a IP correcta i que el dispositiu est\u00e0 disponible a la xarxa"
         },
         "step": {
             "discovery_confirm": {
@@ -18,7 +18,7 @@
                 "title": "Confirmaci\u00f3"
             },
             "reauth_confirm": {
-                "description": "L'API local no est\u00e0 activada. V\u00e9s l'aplicaci\u00f3 HomeWizard Energy i activa l'API a la configuraci\u00f3 de dispositiu."
+                "description": "L'API local no est\u00e0 activada. Aneu a l'aplicaci\u00f3 HomeWizard Energy i activeu l'API a la configuraci\u00f3 de dispositiu."
             },
             "user": {
                 "data": {

homeassistant/components/homewizard/translations/nl.json

@@ -5,13 +5,21 @@
             "api_not_enabled": "De API is niet ingeschakeld. Activeer API in de HomeWizard Energy App onder instellingen",
             "device_not_supported": "Dit apparaat wordt niet ondersteund",
             "invalid_discovery_parameters": "Niet-ondersteunde API-versie gedetecteerd",
+            "reauth_successful": "De API is succesvol ingeschakeld",
             "unknown_error": "Onverwachte fout"
         },
+        "error": {
+            "api_not_enabled": "De API is niet ingeschakeld. Schakel de API in via de HomeWizard Energy app via de instellingen.",
+            "network_error": "Apparaat is niet bereikbaar, controleer dat het juiste IP-adres is gebruikt en dat het apparaat bereikbaar is in het netwerk"
+        },
         "step": {
             "discovery_confirm": {
                 "description": "Wilt u {product_type} ({serial}) op {ip_address} instellen?",
                 "title": "Bevestig"
             },
+            "reauth_confirm": {
+                "description": "De lokale API is niet ingeschakeld. Ga naar de HomeWizard Energy app en schakel de API in via apparaatinstellingen"
+            },
             "user": {
                 "data": {
                     "ip_address": "IP-adres"

homeassistant/components/knx/translations/sk.json

@@ -11,6 +11,10 @@
             "invalid_individual_address": "Hodnota sa nezhoduje so vzorom pre individu\u00e1lnu adresu KNX.\n 'area.line.device'",
             "invalid_ip_address": "Neplatn\u00e1 adresa IPv4.",
             "invalid_signature": "Heslo na de\u0161ifrovanie s\u00faboru `.knxkeys` je nespr\u00e1vne.",
+            "keyfile_invalid_signature": "Heslo na de\u0161ifrovanie s\u00faboru `.knxkeys` je nespr\u00e1vne.",
+            "keyfile_no_backbone_key": "S\u00fabor `.knxkeys` neobsahuje k\u013e\u00fa\u010d chrbtice pre bezpe\u010dn\u00e9 smerovanie.",
+            "keyfile_no_tunnel_for_host": "S\u00fabor `.knxkeys` neobsahuje poverenia pre hostite\u013ea `{host}`.",
+            "keyfile_not_found": "Zadan\u00fd s\u00fabor `.knxkeys` sa nena\u0161iel v ceste config/.storage/knx/",
             "no_router_discovered": "V sieti nebol n\u00e1jden\u00fd \u017eiadny router KNXnet/IP.",
             "no_tunnel_discovered": "Vo va\u0161ej sieti sa nepodarilo n\u00e1js\u0165 tunelovac\u00ed server KNX.",
             "unsupported_tunnel_type": "Vybran\u00fd typ tunelovania nie je podporovan\u00fd br\u00e1nou."
@@ -20,7 +24,15 @@
                 "data": {
                     "connection_type": "Typ pripojenia KNX"
                 },
-                "description": "Zadajte typ pripojenia, ktor\u00fd by sme mali pou\u017ei\u0165 pre va\u0161e pripojenie KNX.\n AUTOMATICKY - Integr\u00e1cia sa star\u00e1 o pripojenie k va\u0161ej zbernici KNX vykonan\u00edm skenovania br\u00e1ny.\n TUNNELING - Integr\u00e1cia sa pripoj\u00ed k va\u0161ej KNX zbernici prostredn\u00edctvom tunelovania.\n ROUTOVANIE - Integr\u00e1cia sa pripoj\u00ed k va\u0161ej KNX zbernici cez smerovanie."
+                "description": "Zadajte typ pripojenia, ktor\u00fd by sme mali pou\u017ei\u0165 pre va\u0161e pripojenie KNX.\n AUTOMATICKY - Integr\u00e1cia sa star\u00e1 o pripojenie k va\u0161ej zbernici KNX vykonan\u00edm skenovania br\u00e1ny.\n TUNNELING - Integr\u00e1cia sa pripoj\u00ed k va\u0161ej KNX zbernici prostredn\u00edctvom tunelovania.\n ROUTOVANIE - Integr\u00e1cia sa pripoj\u00ed k va\u0161ej KNX zbernici cez smerovanie.",
+                "title": "Pripojenie KNX"
+            },
+            "knxkeys_tunnel_select": {
+                "data": {
+                    "user_id": "\u201eAutomaticky\u201c pou\u017eije prv\u00fd vo\u013en\u00fd koncov\u00fd bod tunela."
+                },
+                "description": "Vyberte tunel pou\u017eit\u00fd na pripojenie.",
+                "title": "Koncov\u00fd bod tunela"
             },
             "manual_tunnel": {
                 "data": {
@@ -36,7 +48,8 @@
                     "port": "Port tunelovacieho zariadenia KNX/IP.",
                     "route_back": "Povo\u013ete, ak je v\u00e1\u0161 server tunelovania KNXnet/IP za NAT. Plat\u00ed len pre pripojenia UDP."
                 },
-                "description": "Zadajte inform\u00e1cie o pripojen\u00ed v\u00e1\u0161ho tunelovacieho zariadenia."
+                "description": "Zadajte inform\u00e1cie o pripojen\u00ed v\u00e1\u0161ho tunelovacieho zariadenia.",
+                "title": "Nastavenia tunela"
             },
             "routing": {
                 "data": {
@@ -50,7 +63,8 @@
                     "individual_address": "Adresa KNX, ktor\u00fa bude pou\u017e\u00edva\u0165 Home Assistant, napr. `0.0.4`",
                     "local_ip": "Ak chcete pou\u017ei\u0165 automatick\u00e9 zis\u0165ovanie, nechajte pole pr\u00e1zdne."
                 },
-                "description": "Nakonfigurujte mo\u017enosti smerovania."
+                "description": "Nakonfigurujte mo\u017enosti smerovania.",
+                "title": "Routing"
             },
             "secure_key_source": {
                 "description": "Vyberte, ako chcete nakonfigurova\u0165 KNX/IP Secure.",
@@ -58,7 +72,8 @@
                     "secure_knxkeys": "Pou\u017eite s\u00fabor `.knxkeys` obsahuj\u00faci bezpe\u010dnostn\u00e9 k\u013e\u00fa\u010de IP",
                     "secure_routing_manual": "Nakonfigurujte zabezpe\u010den\u00fd k\u013e\u00fa\u010d chrbticovej siete IP manu\u00e1lne",
                     "secure_tunnel_manual": "Manu\u00e1lne nakonfigurujte bezpe\u010dnostn\u00e9 poverenia IP"
-                }
+                },
+                "title": "KNX IP-Secure"
             },
             "secure_knxkeys": {
                 "data": {
@@ -69,7 +84,8 @@
                     "knxkeys_filename": "O\u010dak\u00e1va sa, \u017ee s\u00fabor n\u00e1jdete vo va\u0161om konfigura\u010dnom adres\u00e1ri v `.storage/knx/`.\n V opera\u010dnom syst\u00e9me Home Assistant to bude `/config/.storage/knx/`\n Pr\u00edklad: `my_project.knxkeys`",
                     "knxkeys_password": "Toto bolo nastaven\u00e9 pri exporte s\u00faboru z ETS."
                 },
-                "description": "Zadajte inform\u00e1cie pre v\u00e1\u0161 s\u00fabor `.knxkeys`."
+                "description": "Zadajte inform\u00e1cie pre v\u00e1\u0161 s\u00fabor `.knxkeys`.",
+                "title": "Keyfile"
             },
             "secure_routing_manual": {
                 "data": {
@@ -80,7 +96,8 @@
                     "backbone_key": "Mo\u017eno ho vidie\u0165 v spr\u00e1ve \u201eBezpe\u010dnos\u0165\u201c projektu ETS. Napr. '00112233445566778899AABBCCDDEEFF'",
                     "sync_latency_tolerance": "Predvolen\u00e1 hodnota je 1000."
                 },
-                "description": "Pros\u00edm, zadajte svoje IP zabezpe\u010den\u00e9 inform\u00e1cie."
+                "description": "Pros\u00edm, zadajte svoje IP zabezpe\u010den\u00e9 inform\u00e1cie.",
+                "title": "Bezpe\u010dn\u00fd routing"
             },
             "secure_tunnel_manual": {
                 "data": {
@@ -93,13 +110,15 @@
                     "user_id": "Toto je \u010dasto \u010d\u00edslo tunela +1. Tak\u017ee \u201eTunnel 2\u201c bude ma\u0165 User-ID \u201e3\u201c.",
                     "user_password": "Heslo pre \u0161pecifick\u00e9 pripojenie tunela nastaven\u00e9 na paneli \u201eVlastnosti\u201c tunela v ETS."
                 },
-                "description": "Pros\u00edm, zadajte svoje IP zabezpe\u010den\u00e9 inform\u00e1cie."
+                "description": "Pros\u00edm, zadajte svoje IP zabezpe\u010den\u00e9 inform\u00e1cie.",
+                "title": "Bezpe\u010dn\u00e9 tuneling"
             },
             "tunnel": {
                 "data": {
                     "gateway": "Pripojenie tunela KNX"
                 },
-                "description": "Vyberte br\u00e1nu zo zoznamu."
+                "description": "Vyberte br\u00e1nu zo zoznamu.",
+                "title": "Tunel"
             }
         }
     },
@@ -111,6 +130,10 @@
             "invalid_individual_address": "Hodnota sa nezhoduje so vzorom pre individu\u00e1lnu adresu KNX.\n 'area.line.device'",
             "invalid_ip_address": "Neplatn\u00e1 adresa IPv4.",
             "invalid_signature": "Heslo na de\u0161ifrovanie s\u00faboru `.knxkeys` je nespr\u00e1vne.",
+            "keyfile_invalid_signature": "Heslo na de\u0161ifrovanie s\u00faboru `.knxkeys` je nespr\u00e1vne.",
+            "keyfile_no_backbone_key": "S\u00fabor `.knxkeys` neobsahuje k\u013e\u00fa\u010d chrbtice pre bezpe\u010dn\u00e9 smerovanie.",
+            "keyfile_no_tunnel_for_host": "S\u00fabor `.knxkeys` neobsahuje poverenia pre hostite\u013ea `{host}`.",
+            "keyfile_not_found": "Zadan\u00fd s\u00fabor `.knxkeys` sa nena\u0161iel v ceste config/.storage/knx/",
             "no_router_discovered": "V sieti nebol n\u00e1jden\u00fd \u017eiadny router KNXnet/IP.",
             "no_tunnel_discovered": "Vo va\u0161ej sieti sa nepodarilo n\u00e1js\u0165 tunelovac\u00ed server KNX.",
             "unsupported_tunnel_type": "Vybran\u00fd typ tunelovania nie je podporovan\u00fd br\u00e1nou."
@@ -124,13 +147,22 @@
                 "data_description": {
                     "rate_limit": "Maxim\u00e1lny po\u010det odch\u00e1dzaj\u00facich telegramov za sekundu.\n `0` pre deaktiv\u00e1ciu limitu. Odpor\u00fa\u010dan\u00e9: 0 alebo 20 a\u017e 40",
                     "state_updater": "Nastavi\u0165 predvolen\u00e9 pre \u010d\u00edtanie stavov zo zbernice KNX. Ke\u010f je vypnut\u00fd, Home Assistant nebude akt\u00edvne z\u00edskava\u0165 stavy ent\u00edt zo zbernice KNX. D\u00e1 sa prep\u00edsa\u0165 mo\u017enos\u0165ami entity `sync_state`."
-                }
+                },
+                "title": "Nastavenia komunik\u00e1cie"
             },
             "connection_type": {
                 "data": {
                     "connection_type": "Typ pripojenia KNX"
                 },
-                "description": "Zadajte typ pripojenia, ktor\u00fd by sme mali pou\u017ei\u0165 pre va\u0161e pripojenie KNX.\n AUTOMATICKY - Integr\u00e1cia sa star\u00e1 o pripojenie k va\u0161ej zbernici KNX vykonan\u00edm skenovania br\u00e1ny.\n TUNNELING - Integr\u00e1cia sa pripoj\u00ed k va\u0161ej KNX zbernici prostredn\u00edctvom tunelovania.\n ROUTOVANIE - Integr\u00e1cia sa pripoj\u00ed k va\u0161ej KNX zbernici cez smerovanie."
+                "description": "Zadajte typ pripojenia, ktor\u00fd by sme mali pou\u017ei\u0165 pre va\u0161e pripojenie KNX.\n AUTOMATICKY - Integr\u00e1cia sa star\u00e1 o pripojenie k va\u0161ej zbernici KNX vykonan\u00edm skenovania br\u00e1ny.\n TUNNELING - Integr\u00e1cia sa pripoj\u00ed k va\u0161ej KNX zbernici prostredn\u00edctvom tunelovania.\n ROUTOVANIE - Integr\u00e1cia sa pripoj\u00ed k va\u0161ej KNX zbernici cez smerovanie.",
+                "title": "Pripojenie KNX"
+            },
+            "knxkeys_tunnel_select": {
+                "data": {
+                    "user_id": "\u201eAutomaticky\u201c pou\u017eije prv\u00fd vo\u013en\u00fd koncov\u00fd bod tunela."
+                },
+                "description": "Vyberte tunel pou\u017eit\u00fd na pripojenie.",
+                "title": "Koncov\u00fd bod tunela"
             },
             "manual_tunnel": {
                 "data": {
@@ -146,13 +178,15 @@
                     "port": "Port tunelovacieho zariadenia KNX/IP.",
                     "route_back": "Povo\u013ete, ak je v\u00e1\u0161 server tunelovania KNXnet/IP za NAT. Plat\u00ed len pre pripojenia UDP."
                 },
-                "description": "Zadajte inform\u00e1cie o pripojen\u00ed v\u00e1\u0161ho tunelovacieho zariadenia."
+                "description": "Zadajte inform\u00e1cie o pripojen\u00ed v\u00e1\u0161ho tunelovacieho zariadenia.",
+                "title": "Nastavenia tunela"
             },
             "options_init": {
                 "menu_options": {
                     "communication_settings": "Nastavenia komunik\u00e1cie",
                     "connection_type": "Konfigur\u00e1cia rozhrania KNX"
-                }
+                },
+                "title": "Nastavenia KNX"
             },
             "routing": {
                 "data": {
@@ -166,7 +200,8 @@
                     "individual_address": "Adresa KNX, ktor\u00fa bude pou\u017e\u00edva\u0165 Home Assistant, napr. `0.0.4`",
                     "local_ip": "Ak chcete pou\u017ei\u0165 automatick\u00e9 zis\u0165ovanie, nechajte pole pr\u00e1zdne."
                 },
-                "description": "Nakonfigurujte mo\u017enosti smerovania."
+                "description": "Nakonfigurujte mo\u017enosti smerovania.",
+                "title": "Routing"
             },
             "secure_key_source": {
                 "description": "Vyberte, ako chcete nakonfigurova\u0165 KNX/IP Secure.",
@@ -174,7 +209,8 @@
                     "secure_knxkeys": "Pou\u017eite s\u00fabor `.knxkeys` obsahuj\u00faci bezpe\u010dnostn\u00e9 k\u013e\u00fa\u010de IP",
                     "secure_routing_manual": "Nakonfigurujte zabezpe\u010den\u00fd k\u013e\u00fa\u010d chrbticovej siete IP manu\u00e1lne",
                     "secure_tunnel_manual": "Manu\u00e1lne nakonfigurujte bezpe\u010dnostn\u00e9 poverenia IP"
-                }
+                },
+                "title": "KNX IP-Secure"
             },
             "secure_knxkeys": {
                 "data": {
@@ -185,7 +221,8 @@
                     "knxkeys_filename": "O\u010dak\u00e1va sa, \u017ee s\u00fabor n\u00e1jdete vo va\u0161om konfigura\u010dnom adres\u00e1ri v `.storage/knx/`.\n V opera\u010dnom syst\u00e9me Home Assistant to bude `/config/.storage/knx/`\n Pr\u00edklad: `my_project.knxkeys`",
                     "knxkeys_password": "Toto bolo nastaven\u00e9 pri exporte s\u00faboru z ETS."
                 },
-                "description": "Zadajte inform\u00e1cie pre v\u00e1\u0161 s\u00fabor `.knxkeys`."
+                "description": "Zadajte inform\u00e1cie pre v\u00e1\u0161 s\u00fabor `.knxkeys`.",
+                "title": "Keyfile"
             },
             "secure_routing_manual": {
                 "data": {
@@ -196,7 +233,8 @@
                     "backbone_key": "Mo\u017eno ho vidie\u0165 v spr\u00e1ve \u201eBezpe\u010dnos\u0165\u201c projektu ETS. Napr. '00112233445566778899AABBCCDDEEFF'",
                     "sync_latency_tolerance": "Predvolen\u00e1 hodnota je 1000."
                 },
-                "description": "Pros\u00edm, zadajte svoje IP zabezpe\u010den\u00e9 inform\u00e1cie."
+                "description": "Pros\u00edm, zadajte svoje IP zabezpe\u010den\u00e9 inform\u00e1cie.",
+                "title": "Bezpe\u010dn\u00fd routing"
             },
             "secure_tunnel_manual": {
                 "data": {
@@ -209,13 +247,15 @@
                     "user_id": "Toto je \u010dasto \u010d\u00edslo tunela +1. Tak\u017ee \u201eTunnel 2\u201c bude ma\u0165 User-ID \u201e3\u201c.",
                     "user_password": "Heslo pre \u0161pecifick\u00e9 pripojenie tunela nastaven\u00e9 na paneli \u201eVlastnosti\u201c tunela v ETS."
                 },
-                "description": "Pros\u00edm, zadajte svoje IP zabezpe\u010den\u00e9 inform\u00e1cie."
+                "description": "Pros\u00edm, zadajte svoje IP zabezpe\u010den\u00e9 inform\u00e1cie.",
+                "title": "Bezpe\u010dn\u00e9 tuneling"
             },
             "tunnel": {
                 "data": {
                     "gateway": "Pripojenie tunela KNX"
                 },
-                "description": "Vyberte br\u00e1nu zo zoznamu."
+                "description": "Vyberte br\u00e1nu zo zoznamu.",
+                "title": "Tunel"
             }
         }
     }

homeassistant/components/motion_blinds/translations/lt.json

@@ -0,0 +1,7 @@
+{
+    "config": {
+        "abort": {
+            "already_configured": "\u012erenginys jau sukonfig\u016bruotas"
+        }
+    }
+}

homeassistant/components/mysensors/translations/ca.json

@@ -83,5 +83,18 @@
                 "description": "Tria el m\u00e8tode de connexi\u00f3 a la passarel\u00b7la"
             }
         }
+    },
+    "issues": {
+        "deprecated_service": {
+            "fix_flow": {
+                "step": {
+                    "confirm": {
+                        "description": "Actualitzeu totes les automatitzacions o scripts que usen aquest servei o, alternativament, empreu el servei `{alternative_service}` amb un ID d'entitat objectiu de `{alternate_target}`.",
+                        "title": "El servei {deprecated_service} s'eliminar\u00e0"
+                    }
+                }
+            },
+            "title": "El servei {deprecated_service} s'eliminar\u00e0"
+        }
     }
 }

homeassistant/components/mysensors/translations/de.json

@@ -83,5 +83,18 @@
                 "description": "Verbindungsmethode zum Gateway w\u00e4hlen"
             }
         }
+    },
+    "issues": {
+        "deprecated_service": {
+            "fix_flow": {
+                "step": {
+                    "confirm": {
+                        "description": "Aktualisiere alle Automatisierungen oder Skripte, die diesen Dienst verwenden, um stattdessen den Dienst `{alternate_service}` mit einer Ziel-Entit\u00e4ts-ID von `{alternate_target}` zu verwenden.",
+                        "title": "Der Dienst {deprecated_service} wird entfernt"
+                    }
+                }
+            },
+            "title": "Der Dienst {deprecated_service} wird entfernt"
+        }
     }
 }

homeassistant/components/mysensors/translations/el.json

@@ -83,5 +83,18 @@
                 "description": "\u0395\u03c0\u03b9\u03bb\u03ad\u03be\u03c4\u03b5 \u03bc\u03ad\u03b8\u03bf\u03b4\u03bf \u03c3\u03cd\u03bd\u03b4\u03b5\u03c3\u03b7\u03c2 \u03bc\u03b5 \u03c4\u03b7\u03bd \u03c0\u03cd\u03bb\u03b7"
             }
         }
+    },
+    "issues": {
+        "deprecated_service": {
+            "fix_flow": {
+                "step": {
+                    "confirm": {
+                        "description": "\u0395\u03bd\u03b7\u03bc\u03b5\u03c1\u03ce\u03c3\u03c4\u03b5 \u03c4\u03c5\u03c7\u03cc\u03bd \u03b1\u03c5\u03c4\u03bf\u03bc\u03b1\u03c4\u03b9\u03c3\u03bc\u03bf\u03cd\u03c2 \u03ae \u03c3\u03b5\u03bd\u03ac\u03c1\u03b9\u03b1 \u03c0\u03bf\u03c5 \u03c7\u03c1\u03b7\u03c3\u03b9\u03bc\u03bf\u03c0\u03bf\u03b9\u03bf\u03cd\u03bd \u03b1\u03c5\u03c4\u03ae\u03bd \u03c4\u03b7\u03bd \u03c5\u03c0\u03b7\u03c1\u03b5\u03c3\u03af\u03b1 \u03b3\u03b9\u03b1 \u03bd\u03b1 \u03c7\u03c1\u03b7\u03c3\u03b9\u03bc\u03bf\u03c0\u03bf\u03b9\u03ae\u03c3\u03b5\u03c4\u03b5 \u03c4\u03b7\u03bd \u03c5\u03c0\u03b7\u03c1\u03b5\u03c3\u03af\u03b1 \u00ab {alternate_service} \u00bb \u03bc\u03b5 \u03b1\u03bd\u03b1\u03b3\u03bd\u03c9\u03c1\u03b9\u03c3\u03c4\u03b9\u03ba\u03cc \u03bf\u03bd\u03c4\u03cc\u03c4\u03b7\u03c4\u03b1\u03c2 \u03c3\u03c4\u03cc\u03c7\u03bf\u03c5 \u00ab {alternate_target} \u00bb.",
+                        "title": "\u0397 \u03c5\u03c0\u03b7\u03c1\u03b5\u03c3\u03af\u03b1 {deprecated_service} \u03b8\u03b1 \u03ba\u03b1\u03c4\u03b1\u03c1\u03b3\u03b7\u03b8\u03b5\u03af"
+                    }
+                }
+            },
+            "title": "\u0397 \u03c5\u03c0\u03b7\u03c1\u03b5\u03c3\u03af\u03b1 {deprecated_service} \u03b8\u03b1 \u03ba\u03b1\u03c4\u03b1\u03c1\u03b3\u03b7\u03b8\u03b5\u03af"
+        }
     }
 }

homeassistant/components/mysensors/translations/es.json

@@ -83,5 +83,18 @@
                 "description": "Elige el m\u00e9todo de conexi\u00f3n a la puerta de enlace"
             }
         }
+    },
+    "issues": {
+        "deprecated_service": {
+            "fix_flow": {
+                "step": {
+                    "confirm": {
+                        "description": "Actualiza cualquier automatizaci\u00f3n o script que use este servicio para usar en su lugar el servicio `{alternate_service}` con una ID de entidad de destino de `{alternate_target}`.",
+                        "title": "Se eliminar\u00e1 el servicio {deprecated_service}"
+                    }
+                }
+            },
+            "title": "Se eliminar\u00e1 el servicio {deprecated_service}"
+        }
     }
 }

homeassistant/components/mysensors/translations/et.json

@@ -83,5 +83,18 @@
                 "description": "Vali l\u00fc\u00fcsi \u00fchendusviis"
             }
         }
+    },
+    "issues": {
+        "deprecated_service": {
+            "fix_flow": {
+                "step": {
+                    "confirm": {
+                        "description": "V\u00e4rskenda k\u00f5iki automaatikaid v\u00f5i skripte, mis seda teenust kasutavad, et kasutada selle asemel teenust '{alternate_service}', mille sihtolemi ID on '{alternate_target}'.",
+                        "title": "Teenus {deprecated_service} eemaldatakse"
+                    }
+                }
+            },
+            "title": "Teenus {deprecated_service} eemaldatakse"
+        }
     }
 }

homeassistant/components/mysensors/translations/it.json

@@ -83,5 +83,18 @@
                 "description": "Scegli il metodo di connessione al gateway"
             }
         }
+    },
+    "issues": {
+        "deprecated_service": {
+            "fix_flow": {
+                "step": {
+                    "confirm": {
+                        "description": "Aggiornare tutte le automazioni o gli script che utilizzano questo servizio per utilizzare invece il servizio `{alternate_service}` con un ID entit\u00e0 di destinazione `{alternate_target}`.",
+                        "title": "Il servizio {deprecated_service} sar\u00e0 rimosso"
+                    }
+                }
+            },
+            "title": "Il servizio {deprecated_service} sar\u00e0 rimosso"
+        }
     }
 }

homeassistant/components/mysensors/translations/nl.json

@@ -81,5 +81,17 @@
                 "description": "Kies de verbindingsmethode met de gateway"
             }
         }
+    },
+    "issues": {
+        "deprecated_service": {
+            "fix_flow": {
+                "step": {
+                    "confirm": {
+                        "title": "De {deprecated_service} service zal worden verwijderd"
+                    }
+                }
+            },
+            "title": "De {deprecated_service} service zal worden verwijderd"
+        }
     }
 }

homeassistant/components/mysensors/translations/no.json

@@ -83,5 +83,18 @@
                 "description": "Velg tilkoblingsmetode til gatewayen"
             }
         }
+    },
+    "issues": {
+        "deprecated_service": {
+            "fix_flow": {
+                "step": {
+                    "confirm": {
+                        "description": "Oppdater eventuelle automatiseringer eller skript som bruker denne tjenesten for i stedet \u00e5 bruke ` {alternate_service} `-tjenesten med en m\u00e5lenhets-ID p\u00e5 ` {alternate_target} `.",
+                        "title": "{deprecated_service} -tjenesten vil bli fjernet"
+                    }
+                }
+            },
+            "title": "{deprecated_service} -tjenesten vil bli fjernet"
+        }
     }
 }

homeassistant/components/mysensors/translations/sk.json

@@ -83,5 +83,18 @@
                 "description": "Vyberte sp\u00f4sob pripojenia k br\u00e1ne"
             }
         }
+    },
+    "issues": {
+        "deprecated_service": {
+            "fix_flow": {
+                "step": {
+                    "confirm": {
+                        "description": "Aktualizujte v\u0161etky automatiz\u00e1cie alebo skripty, ktor\u00e9 pou\u017e\u00edvaj\u00fa t\u00fato slu\u017ebu, aby namiesto nej pou\u017e\u00edvali slu\u017ebu `{alternate_service}` s ID cie\u013eovej entity `{alternate_target}`.",
+                        "title": "Slu\u017eba {deprecated_service} bude odstr\u00e1nen\u00e1"
+                    }
+                }
+            },
+            "title": "Slu\u017eba {deprecated_service} bude odstr\u00e1nen\u00e1"
+        }
     }
 }

homeassistant/components/mysensors/translations/zh-Hant.json

@@ -83,5 +83,18 @@
                 "description": "\u9078\u64c7\u9598\u9053\u5668\u9023\u7dda\u65b9\u5f0f"
             }
         }
+    },
+    "issues": {
+        "deprecated_service": {
+            "fix_flow": {
+                "step": {
+                    "confirm": {
+                        "description": "\u4f7f\u7528\u6b64\u670d\u52d9\u4ee5\u66f4\u65b0\u4efb\u4f55\u81ea\u52d5\u5316\u6216\u8173\u672c\u3001\u4ee5\u53d6\u4ee3\u4f7f\u7528\u76ee\u6a19\u5be6\u9ad4 ID \u70ba `{alternate_target}` \u4e4b `{alternate_service}` \u670d\u52d9\u3002",
+                        "title": "{deprecated_service} \u670d\u52d9\u5c07\u79fb\u9664"
+                    }
+                }
+            },
+            "title": "{deprecated_service} \u670d\u52d9\u5c07\u79fb\u9664"
+        }
     }
 }

homeassistant/components/pi_hole/translations/ca.json

@@ -25,5 +25,11 @@
                 }
             }
         }
+    },
+    "issues": {
+        "deprecated_yaml": {
+            "description": "L'opci\u00f3 de configurar el PI-Hole usant YAML s'est\u00e0 eliminant.\n\nLa vostra configuraci\u00f3 YAML actual s'ha importat autom\u00e0ticament a la IGU.\n\nElimineu la configuraci\u00f3 YAML del Pi-Hole del vostre fitxer \u00abconfiguration.yaml\u00bb i reinicieu el Home Assistant per tal d'esmenar aquesta incid\u00e8ncia.",
+            "title": "S'est\u00e0 eliminant la configuraci\u00f3 YAML del PI-Hole"
+        }
     }
 }

homeassistant/components/pi_hole/translations/de.json

@@ -28,7 +28,7 @@
     },
     "issues": {
         "deprecated_yaml": {
-            "description": "Die Konfiguration von PI-Hole mit YAML wird entfernt. \n\nDeine vorhandene YAML-Konfiguration wurde automatisch in die Benutzeroberfl\u00e4che importiert. \n\nEntferne die PI-Hole-YAML-Konfiguration aus deiner configuration.yaml-Datei und starte Home Assistant neu, um dieses Problem zu beheben.",
+            "description": "Die Konfiguration von PI-Hole mittels YAML wird entfernt.\n\nDeine bestehende YAML-Konfiguration wurde automatisch in die Benutzeroberfl\u00e4che importiert.\n\nEntferne die PI-Hole YAML-Konfiguration aus deiner configuration.yaml-Datei und starte den Home Assistant neu, um dieses Problem zu beheben.",
             "title": "Die PI-Hole YAML-Konfiguration wird entfernt"
         }
     }

homeassistant/components/pi_hole/translations/el.json

@@ -25,5 +25,11 @@
                 }
             }
         }
+    },
+    "issues": {
+        "deprecated_yaml": {
+            "description": "\u0397 \u03b4\u03b9\u03b1\u03bc\u03cc\u03c1\u03c6\u03c9\u03c3\u03b7 PI-Hole \u03bc\u03b5 \u03c7\u03c1\u03ae\u03c3\u03b7 YAML \u03ba\u03b1\u03c4\u03b1\u03c1\u03b3\u03b5\u03af\u03c4\u03b1\u03b9. \n\n \u0397 \u03c5\u03c0\u03ac\u03c1\u03c7\u03bf\u03c5\u03c3\u03b1 \u03b4\u03b9\u03b1\u03bc\u03cc\u03c1\u03c6\u03c9\u03c3\u03ae \u03c3\u03b1\u03c2 YAML \u03ad\u03c7\u03b5\u03b9 \u03b5\u03b9\u03c3\u03b1\u03c7\u03b8\u03b5\u03af \u03b1\u03c5\u03c4\u03cc\u03bc\u03b1\u03c4\u03b1 \u03c3\u03c4\u03b7 \u03b4\u03b9\u03b5\u03c0\u03b1\u03c6\u03ae \u03c7\u03c1\u03ae\u03c3\u03c4\u03b7. \n\n \u039a\u03b1\u03c4\u03b1\u03c1\u03b3\u03ae\u03c3\u03c4\u03b5 \u03c4\u03b7 \u03b4\u03b9\u03b1\u03bc\u03cc\u03c1\u03c6\u03c9\u03c3\u03b7 PI-Hole YAML \u03b1\u03c0\u03cc \u03c4\u03bf \u03b1\u03c1\u03c7\u03b5\u03af\u03bf configuration.yaml \u03ba\u03b1\u03b9 \u03b5\u03c0\u03b1\u03bd\u03b5\u03ba\u03ba\u03b9\u03bd\u03ae\u03c3\u03c4\u03b5 \u03c4\u03bf Home Assistant \u03b3\u03b9\u03b1 \u03bd\u03b1 \u03b4\u03b9\u03bf\u03c1\u03b8\u03ce\u03c3\u03b5\u03c4\u03b5 \u03b1\u03c5\u03c4\u03cc \u03c4\u03bf \u03c0\u03c1\u03cc\u03b2\u03bb\u03b7\u03bc\u03b1.",
+            "title": "\u0397 \u03b4\u03b9\u03b1\u03bc\u03cc\u03c1\u03c6\u03c9\u03c3\u03b7 YAML PI-Hole \u03ba\u03b1\u03c4\u03b1\u03c1\u03b3\u03b5\u03af\u03c4\u03b1\u03b9"
+        }
     }
 }

homeassistant/components/pi_hole/translations/es.json

@@ -25,5 +25,11 @@
                 }
             }
         }
+    },
+    "issues": {
+        "deprecated_yaml": {
+            "description": "Se va a eliminar la configuraci\u00f3n de PI-Hole mediante YAML. \n\nTu configuraci\u00f3n YAML existente se ha importado a la IU autom\u00e1ticamente. \n\nElimina la configuraci\u00f3n YAML de PI-Hole de tu archivo configuration.yaml y reinicia Home Assistant para solucionar este problema.",
+            "title": "Se va a eliminar la configuraci\u00f3n YAML de PI-Hole"
+        }
     }
 }

homeassistant/components/pi_hole/translations/et.json

@@ -25,5 +25,11 @@
                 }
             }
         }
+    },
+    "issues": {
+        "deprecated_yaml": {
+            "description": "PI-Hole'i konfigureerimine YAML-i abil eemaldatakse.\n\nTeie olemasolev YAML-konfiguratsioon on automaatselt kasutajaliidesesse imporditud.\n\nEemaldage PI-Hole'i YAML-konfiguratsioon oma configuration.yaml-failist ja k\u00e4ivitage Home Assistant uuesti, et see probleem lahendada.",
+            "title": "PI-Hole YAML-i konfiguratsiooni eemaldatakse"
+        }
     }
 }

homeassistant/components/pi_hole/translations/it.json

@@ -25,5 +25,11 @@
                 }
             }
         }
+    },
+    "issues": {
+        "deprecated_yaml": {
+            "description": "La configurazione di PI-Hole tramite YAML \u00e8 stata rimossa. \n\nLa configurazione YAML esistente \u00e8 stata importata automaticamente nell'interfaccia utente. \n\nRimuovi la configurazione YAML PI-Hole dal tuo file configuration.yaml e riavvia Home Assistant per risolvere questo problema.",
+            "title": "La configurazione YAML PI-Hole \u00e8 in fase di rimozione"
+        }
     }
 }

homeassistant/components/pi_hole/translations/no.json

@@ -25,5 +25,11 @@
                 }
             }
         }
+    },
+    "issues": {
+        "deprecated_yaml": {
+            "description": "Konfigurering av PI-hull med YAML blir fjernet. \n\n Din eksisterende YAML-konfigurasjon har blitt importert til brukergrensesnittet automatisk. \n\n Fjern PI-Hole YAML-konfigurasjonen fra configuration.yaml-filen og start Home Assistant p\u00e5 nytt for \u00e5 fikse dette problemet.",
+            "title": "PI-Hole YAML-konfigurasjonen blir fjernet"
+        }
     }
 }

homeassistant/components/pi_hole/translations/sk.json

@@ -25,5 +25,11 @@
                 }
             }
         }
+    },
+    "issues": {
+        "deprecated_yaml": {
+            "description": "Konfigur\u00e1cia PI-Hole pomocou YAML sa odstra\u0148uje. \n\n Va\u0161a existuj\u00faca konfigur\u00e1cia YAML bola importovan\u00e1 do pou\u017e\u00edvate\u013esk\u00e9ho rozhrania automaticky. \n\n Odstr\u00e1\u0148te konfigur\u00e1ciu PI-Hole YAML zo s\u00faboru configuration.yaml a re\u0161tartujte Home Assistant, aby ste tento probl\u00e9m vyrie\u0161ili.",
+            "title": "Konfigur\u00e1cia PI-Hole YAML sa odstra\u0148uje"
+        }
     }
 }

homeassistant/components/pi_hole/translations/zh-Hant.json

@@ -25,5 +25,11 @@
                 }
             }
         }
+    },
+    "issues": {
+        "deprecated_yaml": {
+            "description": "\u4f7f\u7528 YAML \u8a2d\u5b9a\u7684 PI-Hole \u5373\u5c07\u9032\u884c\u79fb\u9664\u3002\n\n\u65e2\u6709\u7684 YAML \u8a2d\u5b9a\u5c07\u81ea\u52d5\u532f\u5165\u81f3 UI \u5167\u3002\n\n\u8acb\u65bc configuration.yaml \u6a94\u6848\u4e2d\u79fb\u9664 PI-Hole YAML \u8a2d\u5b9a\u4e26\u91cd\u65b0\u555f\u52d5 Home Assistant \u4ee5\u4fee\u6b63\u6b64\u554f\u984c\u3002",
+            "title": "PI-Hole YAML \u8a2d\u5b9a\u5373\u5c07\u79fb\u9664"
+        }
     }
 }

homeassistant/components/plugwise/translations/ca.json

@@ -47,7 +47,7 @@
                     "auto": "Autom\u00e0tic",
                     "boost": "Incrementat",
                     "comfort": "Confort",
-                    "off": "OFF"
+                    "off": "Inactiu"
                 }
             },
             "regulation_mode": {
@@ -56,7 +56,7 @@
                     "bleeding_hot": "Molt calent",
                     "cooling": "Refredant",
                     "heating": "Escalfant",
-                    "off": "OFF"
+                    "off": "Inactiu"
                 }
             }
         }

homeassistant/components/purpleair/translations/ca.json

@@ -30,14 +30,14 @@
                 "data_description": {
                     "sensor_index": "Sensor al qual fer-li seguiment"
                 },
-                "description": "Quins dels sensors propers t'agradaria seguir?"
+                "description": "Quins dels sensors propers us agradaria seguir?"
             },
             "reauth_confirm": {
                 "data": {
                     "api_key": "Clau API"
                 },
                 "data_description": {
-                    "api_key": "Clau API de PurpleAir (si tens claus de lectura i escriptura, utilitza la de lectura)"
+                    "api_key": "Clau API de PurpleAir (si teniu claus de lectura i escriptura, utilitzeu la de lectura)"
                 }
             },
             "user": {
@@ -45,7 +45,7 @@
                     "api_key": "Clau API"
                 },
                 "data_description": {
-                    "api_key": "Clau API de PurpleAir (si tens claus de lectura i escriptura, utilitza la de lectura)"
+                    "api_key": "Clau API de PurpleAir (si teniu claus de lectura i escriptura, utilitzeu la de lectura)"
                 }
             }
         }
@@ -81,13 +81,13 @@
                 "data_description": {
                     "sensor_index": "Sensor al qual fer-li seguiment"
                 },
-                "description": "Quins dels sensors propers t'agradaria seguir?",
+                "description": "Quins dels sensors propers us agradaria seguir?",
-                "title": "Tria sensor a afegir"
+                "title": "Trieu el sensor a afegir"
             },
             "init": {
                 "menu_options": {
-                    "add_sensor": "Afegeix sensor",
+                    "add_sensor": "Afegeix un sensor",
-                    "remove_sensor": "Elimina sensor"
+                    "remove_sensor": "Elimina un sensor"
                 }
             },
             "remove_sensor": {
@@ -97,7 +97,7 @@
                 "data_description": {
                     "sensor_device_id": "Sensor a eliminar"
                 },
-                "title": "Elimina sensor"
+                "title": "Elimina un sensor"
             }
         }
     }

homeassistant/components/reolink/translations/ca.json

@@ -15,7 +15,7 @@
                     "host": "Amfitri\u00f3",
                     "password": "Contrasenya",
                     "port": "Port",
-                    "use_https": "Activa HTTPS",
+                    "use_https": "Activa l'HTTPS",
                     "username": "Nom d'usuari"
                 }
             }

homeassistant/components/reolink/translations/sk.json

@@ -0,0 +1,33 @@
+{
+    "config": {
+        "abort": {
+            "already_configured": "Zariadenie u\u017e je nakonfigurovan\u00e9"
+        },
+        "error": {
+            "api_error": "Vyskytla sa chyba rozhrania API: {error}",
+            "cannot_connect": "Nepodarilo sa pripoji\u0165",
+            "invalid_auth": "Neplatn\u00e9 overenie",
+            "unknown": "Neo\u010dak\u00e1van\u00e1 chyba: {error}"
+        },
+        "step": {
+            "user": {
+                "data": {
+                    "host": "Hostite\u013e",
+                    "password": "Heslo",
+                    "port": "Port",
+                    "use_https": "Povoli\u0165 HTTPS",
+                    "username": "Pou\u017e\u00edvate\u013esk\u00e9 meno"
+                }
+            }
+        }
+    },
+    "options": {
+        "step": {
+            "init": {
+                "data": {
+                    "protocol": "Protokol"
+                }
+            }
+        }
+    }
+}

homeassistant/components/sensor/translations/lt.json

@@ -2,6 +2,9 @@
     "device_automation": {
         "condition_type": {
             "is_illuminance": "Dabartinis {entity_name} ap\u0161vietimas"
+        },
+        "trigger_type": {
+            "illuminance": "{entity_name} ap\u0161vietimas pakito"
         }
     },
     "state": {

homeassistant/components/switchbot/translations/ca.json

@@ -8,14 +8,29 @@
             "unknown": "Error inesperat"
         },
         "error": {
-            "encryption_key_invalid": "L'ID de clau o la clau de xifrat s\u00f3n inv\u00e0lids",
+            "auth_failed": "Ha fallat l'autenticaci\u00f3",
-            "key_id_invalid": "L'ID de clau o la clau de xifrat s\u00f3n inv\u00e0lids"
+            "encryption_key_invalid": "L'ID de clau o la clau de xifrat no s\u00f3n v\u00e0lids",
+            "key_id_invalid": "L'ID de clau o la clau de xifrat no s\u00f3n v\u00e0lids"
         },
         "flow_title": "{name} ({address})",
         "step": {
             "confirm": {
                 "description": "Vols configurar {name}?"
             },
+            "lock_auth": {
+                "data": {
+                    "password": "Contrasenya",
+                    "username": "Nom d'usuari"
+                },
+                "description": "Subministreu el nom d'usuari i la contrasenya d'acc\u00e9s a la vostra app SwitchBot. Aquesta informaci\u00f3 no es desar\u00e0 i nom\u00e9s s'utilitza per recuperar la clau de xifrat."
+            },
+            "lock_chose_method": {
+                "description": "Escolliu el m\u00e8tode de configuraci\u00f3; podeu trobar els detalls a la documentaci\u00f3.",
+                "menu_options": {
+                    "lock_auth": "Usuari i Contrasenya de l'app SwitchBot",
+                    "lock_key": "Bloca la clau de xifrat"
+                }
+            },
             "lock_key": {
                 "data": {
                     "encryption_key": "Clau de xifrat",

homeassistant/components/switchbot/translations/de.json

@@ -8,6 +8,7 @@
             "unknown": "Unerwarteter Fehler"
         },
         "error": {
+            "auth_failed": "Authentifizierung fehlgeschlagen",
             "encryption_key_invalid": "Schl\u00fcssel-ID oder Verschl\u00fcsselungsschl\u00fcssel ist ung\u00fcltig",
             "key_id_invalid": "Schl\u00fcssel-ID oder Verschl\u00fcsselungsschl\u00fcssel ist ung\u00fcltig"
         },
@@ -16,6 +17,20 @@
             "confirm": {
                 "description": "M\u00f6chtest du {name} einrichten?"
             },
+            "lock_auth": {
+                "data": {
+                    "password": "Passwort",
+                    "username": "Benutzername"
+                },
+                "description": "Bitte geben deinen Benutzernamen und dein Passwort f\u00fcr die SwitchBot-App ein. Diese Daten werden nicht gespeichert und nur zum Abrufen des Verschl\u00fcsselungsschl\u00fcssels deines Schlosses verwendet."
+            },
+            "lock_chose_method": {
+                "description": "W\u00e4hle die Konfigurationsmethode, Einzelheiten findest du in der Dokumentation.",
+                "menu_options": {
+                    "lock_auth": "Login und Passwort der SwitchBot-App",
+                    "lock_key": "Verschl\u00fcsselungsschl\u00fcssel sperren"
+                }
+            },
             "lock_key": {
                 "data": {
                     "encryption_key": "Verschl\u00fcsselungsschl\u00fcssel",

homeassistant/components/switchbot/translations/el.json

@@ -8,6 +8,7 @@
             "unknown": "\u0391\u03c0\u03c1\u03cc\u03c3\u03bc\u03b5\u03bd\u03bf \u03c3\u03c6\u03ac\u03bb\u03bc\u03b1"
         },
         "error": {
+            "auth_failed": "\u0397 \u03c4\u03b1\u03c5\u03c4\u03bf\u03c0\u03bf\u03af\u03b7\u03c3\u03b7 \u03b1\u03c0\u03ad\u03c4\u03c5\u03c7\u03b5",
             "encryption_key_invalid": "\u03a4\u03bf \u03b1\u03bd\u03b1\u03b3\u03bd\u03c9\u03c1\u03b9\u03c3\u03c4\u03b9\u03ba\u03cc \u03ba\u03bb\u03b5\u03b9\u03b4\u03b9\u03bf\u03cd \u03ae \u03c4\u03bf \u03ba\u03bb\u03b5\u03b9\u03b4\u03af \u03ba\u03c1\u03c5\u03c0\u03c4\u03bf\u03b3\u03c1\u03ac\u03c6\u03b7\u03c3\u03b7\u03c2 \u03b4\u03b5\u03bd \u03b5\u03af\u03bd\u03b1\u03b9 \u03ad\u03b3\u03ba\u03c5\u03c1\u03bf",
             "key_id_invalid": "\u03a4\u03bf \u03b1\u03bd\u03b1\u03b3\u03bd\u03c9\u03c1\u03b9\u03c3\u03c4\u03b9\u03ba\u03cc \u03ba\u03bb\u03b5\u03b9\u03b4\u03b9\u03bf\u03cd \u03ae \u03c4\u03bf \u03ba\u03bb\u03b5\u03b9\u03b4\u03af \u03ba\u03c1\u03c5\u03c0\u03c4\u03bf\u03b3\u03c1\u03ac\u03c6\u03b7\u03c3\u03b7\u03c2 \u03b4\u03b5\u03bd \u03b5\u03af\u03bd\u03b1\u03b9 \u03ad\u03b3\u03ba\u03c5\u03c1\u03bf",
             "one": "\u03ba\u03b5\u03bd\u03cc",
@@ -18,6 +19,20 @@
             "confirm": {
                 "description": "\u0398\u03ad\u03bb\u03b5\u03c4\u03b5 \u03bd\u03b1 \u03c1\u03c5\u03b8\u03bc\u03af\u03c3\u03b5\u03c4\u03b5 \u03c4\u03bf {name};"
             },
+            "lock_auth": {
+                "data": {
+                    "password": "\u039a\u03c9\u03b4\u03b9\u03ba\u03cc\u03c2 \u03c0\u03c1\u03cc\u03c3\u03b2\u03b1\u03c3\u03b7\u03c2",
+                    "username": "\u038c\u03bd\u03bf\u03bc\u03b1 \u03c7\u03c1\u03ae\u03c3\u03c4\u03b7"
+                },
+                "description": "\u039a\u03b1\u03c4\u03b1\u03c7\u03c9\u03c1\u03af\u03c3\u03c4\u03b5 \u03c4\u03bf \u03cc\u03bd\u03bf\u03bc\u03b1 \u03c7\u03c1\u03ae\u03c3\u03c4\u03b7 \u03ba\u03b1\u03b9 \u03c4\u03bf\u03bd \u03ba\u03c9\u03b4\u03b9\u03ba\u03cc \u03c0\u03c1\u03cc\u03c3\u03b2\u03b1\u03c3\u03b7\u03c2 \u03c4\u03b7\u03c2 \u03b5\u03c6\u03b1\u03c1\u03bc\u03bf\u03b3\u03ae\u03c2 SwitchBot. \u0391\u03c5\u03c4\u03ac \u03c4\u03b1 \u03b4\u03b5\u03b4\u03bf\u03bc\u03ad\u03bd\u03b1 \u03b4\u03b5\u03bd \u03b8\u03b1 \u03b1\u03c0\u03bf\u03b8\u03b7\u03ba\u03b5\u03c5\u03c4\u03bf\u03cd\u03bd \u03ba\u03b1\u03b9 \u03b8\u03b1 \u03c7\u03c1\u03b7\u03c3\u03b9\u03bc\u03bf\u03c0\u03bf\u03b9\u03b7\u03b8\u03bf\u03cd\u03bd \u03bc\u03cc\u03bd\u03bf \u03b3\u03b9\u03b1 \u03c4\u03b7\u03bd \u03b1\u03bd\u03ac\u03ba\u03c4\u03b7\u03c3\u03b7 \u03c4\u03bf\u03c5 \u03ba\u03bb\u03b5\u03b9\u03b4\u03b9\u03bf\u03cd \u03ba\u03c1\u03c5\u03c0\u03c4\u03bf\u03b3\u03c1\u03ac\u03c6\u03b7\u03c3\u03b7\u03c2 \u03ba\u03bb\u03b5\u03b9\u03b4\u03b1\u03c1\u03b9\u03ce\u03bd."
+            },
+            "lock_chose_method": {
+                "description": "\u0395\u03c0\u03b9\u03bb\u03ad\u03be\u03c4\u03b5 \u03bc\u03ad\u03b8\u03bf\u03b4\u03bf \u03b4\u03b9\u03b1\u03bc\u03cc\u03c1\u03c6\u03c9\u03c3\u03b7\u03c2, \u03bb\u03b5\u03c0\u03c4\u03bf\u03bc\u03ad\u03c1\u03b5\u03b9\u03b5\u03c2 \u03bc\u03c0\u03bf\u03c1\u03b5\u03af\u03c4\u03b5 \u03bd\u03b1 \u03b2\u03c1\u03b5\u03af\u03c4\u03b5 \u03c3\u03c4\u03b7\u03bd \u03c4\u03b5\u03ba\u03bc\u03b7\u03c1\u03af\u03c9\u03c3\u03b7.",
+                "menu_options": {
+                    "lock_auth": "\u03a3\u03cd\u03bd\u03b4\u03b5\u03c3\u03b7 \u03ba\u03b1\u03b9 \u03ba\u03c9\u03b4\u03b9\u03ba\u03cc\u03c2 \u03c0\u03c1\u03cc\u03c3\u03b2\u03b1\u03c3\u03b7\u03c2 \u03c4\u03b7\u03c2 \u03b5\u03c6\u03b1\u03c1\u03bc\u03bf\u03b3\u03ae\u03c2 SwitchBot",
+                    "lock_key": "\u039a\u03bb\u03b5\u03af\u03b4\u03c9\u03bc\u03b1 \u03ba\u03bb\u03b5\u03b9\u03b4\u03b9\u03bf\u03cd \u03ba\u03c1\u03c5\u03c0\u03c4\u03bf\u03b3\u03c1\u03ac\u03c6\u03b7\u03c3\u03b7\u03c2"
+                }
+            },
             "lock_key": {
                 "data": {
                     "encryption_key": "\u039a\u03bb\u03b5\u03b9\u03b4\u03af \u03ba\u03c1\u03c5\u03c0\u03c4\u03bf\u03b3\u03c1\u03ac\u03c6\u03b7\u03c3\u03b7\u03c2",

homeassistant/components/switchbot/translations/en.json

@@ -9,7 +9,8 @@
         },
         "error": {
             "auth_failed": "Authentication failed",
-            "encryption_key_invalid": "Key ID or Encryption key is invalid"
+            "encryption_key_invalid": "Key ID or Encryption key is invalid",
+            "key_id_invalid": "Key ID or Encryption key is invalid"
         },
         "flow_title": "{name} ({address})",
         "step": {

homeassistant/components/switchbot/translations/es.json

@@ -8,6 +8,7 @@
             "unknown": "Error inesperado"
         },
         "error": {
+            "auth_failed": "Error de autenticaci\u00f3n",
             "encryption_key_invalid": "El ID de clave o la clave de cifrado no son v\u00e1lidos",
             "key_id_invalid": "El ID de clave o la clave de cifrado no son v\u00e1lidos"
         },
@@ -16,6 +17,20 @@
             "confirm": {
                 "description": "\u00bfQuieres configurar {name}?"
             },
+            "lock_auth": {
+                "data": {
+                    "password": "Contrase\u00f1a",
+                    "username": "Nombre de usuario"
+                },
+                "description": "Por favor, proporciona tu nombre de usuario y contrase\u00f1a de la aplicaci\u00f3n SwitchBot. Estos datos no se guardar\u00e1n y solo se utilizar\u00e1n para recuperar la clave de cifrado de tu cerradura."
+            },
+            "lock_chose_method": {
+                "description": "Elige el m\u00e9todo de configuraci\u00f3n, los detalles se pueden encontrar en la documentaci\u00f3n.",
+                "menu_options": {
+                    "lock_auth": "Inicio de sesi\u00f3n y contrase\u00f1a de la aplicaci\u00f3n SwitchBot",
+                    "lock_key": "Clave de cifrado de la cerradura"
+                }
+            },
             "lock_key": {
                 "data": {
                     "encryption_key": "Clave de cifrado",

homeassistant/components/switchbot/translations/et.json

@@ -8,6 +8,7 @@
             "unknown": "Ootamatu t\u00f5rge"
         },
         "error": {
+            "auth_failed": "Tuvastamine nurjus",
             "encryption_key_invalid": "V\u00f5tme ID v\u00f5i kr\u00fcptov\u00f5ti on sobimatu",
             "key_id_invalid": "V\u00f5tme ID v\u00f5i kr\u00fcptov\u00f5ti on sobimatu"
         },
@@ -16,6 +17,20 @@
             "confirm": {
                 "description": "Kas seadistada {name} ?"
             },
+            "lock_auth": {
+                "data": {
+                    "password": "Salas\u00f5na",
+                    "username": "Kasutajanimi"
+                },
+                "description": "Sisestage SwitchBot rakenduse kasutajanimi ja sals\u00f5na. Neid andmeid ei salvestata ja neid kasutatakse ainult lukkude kr\u00fcpteerimisv\u00f5tme k\u00e4ttesaamiseks."
+            },
+            "lock_chose_method": {
+                "description": "Vali seadistusmeetod, \u00fcksikasjad leiad dokumentatsioonist.",
+                "menu_options": {
+                    "lock_auth": "SwitchBoti rakenduse kasutajanimi ja salas\u00f5na",
+                    "lock_key": "Lukusta kr\u00fcptov\u00f5ti"
+                }
+            },
             "lock_key": {
                 "data": {
                     "encryption_key": "Kr\u00fcptimisv\u00f5ti",

homeassistant/components/switchbot/translations/it.json

@@ -8,6 +8,7 @@
             "unknown": "Errore imprevisto"
         },
         "error": {
+            "auth_failed": "Autenticazione fallita",
             "encryption_key_invalid": "L'ID chiave o la chiave crittografica non sono validi",
             "key_id_invalid": "L'ID chiave o la chiave crittografica non sono validi",
             "one": "Vuoto",
@@ -18,6 +19,20 @@
             "confirm": {
                 "description": "Vuoi configurare {name}?"
             },
+            "lock_auth": {
+                "data": {
+                    "password": "Password",
+                    "username": "Nome utente"
+                },
+                "description": "Fornisci il nome utente e la password dell'app SwitchBot. Questi dati non verranno salvati e utilizzati solo per recuperare la chiave crittografica delle serrature."
+            },
+            "lock_chose_method": {
+                "description": "Scegli il metodo di configurazione, i dettagli possono essere trovati nella documentazione.",
+                "menu_options": {
+                    "lock_auth": "Accesso con password all'app Switchbot",
+                    "lock_key": "Chiave crittografica della serratura"
+                }
+            },
             "lock_key": {
                 "data": {
                     "encryption_key": "Chiave crittografica",

homeassistant/components/switchbot/translations/nl.json

@@ -7,11 +7,27 @@
             "switchbot_unsupported_type": "Niet-ondersteund Switchbot-type.",
             "unknown": "Onverwachte fout"
         },
+        "error": {
+            "auth_failed": "Authenticatie mislukt"
+        },
         "flow_title": "{name}",
         "step": {
             "confirm": {
                 "description": "Wilt u {name} instellen?"
             },
+            "lock_auth": {
+                "data": {
+                    "password": "Wachtwoord",
+                    "username": "Gebruikersnaam"
+                }
+            },
+            "lock_chose_method": {
+                "description": "Kies configuratiemethode, informatie kan gevonden worden in de documentatie.",
+                "menu_options": {
+                    "lock_auth": "SwitchBot app gebruikersnaam en wachtwoord",
+                    "lock_key": "Slot encryptiesleutel"
+                }
+            },
             "password": {
                 "data": {
                     "password": "Wachtwoord"

homeassistant/components/switchbot/translations/sk.json

@@ -8,7 +8,10 @@
             "unknown": "Neo\u010dak\u00e1van\u00e1 chyba"
         },
         "error": {
+            "auth_failed": "Overenie zlyhalo",
+            "encryption_key_invalid": "ID k\u013e\u00fa\u010da alebo \u0161ifrovac\u00ed k\u013e\u00fa\u010d je neplatn\u00fd",
             "few": "Pr\u00e1zdnych",
+            "key_id_invalid": "ID k\u013e\u00fa\u010da alebo \u0161ifrovac\u00ed k\u013e\u00fa\u010d je neplatn\u00fd",
             "many": "Pr\u00e1zdnych",
             "one": "Pr\u00e1zdny",
             "other": "Pr\u00e1zdny"
@@ -18,6 +21,27 @@
             "confirm": {
                 "description": "Chcete nastavi\u0165 {name}?"
             },
+            "lock_auth": {
+                "data": {
+                    "password": "Heslo",
+                    "username": "Pou\u017e\u00edvate\u013esk\u00e9 meno"
+                },
+                "description": "Zadajte svoje pou\u017e\u00edvate\u013esk\u00e9 meno a heslo aplik\u00e1cie SwitchBot. Tieto \u00fadaje sa neulo\u017eia a pou\u017eij\u00fa sa iba na z\u00edskanie \u0161ifrovacieho k\u013e\u00fa\u010da z\u00e1mkov."
+            },
+            "lock_chose_method": {
+                "description": "Vyberte sp\u00f4sob konfigur\u00e1cie, podrobnosti n\u00e1jdete v dokument\u00e1cii.",
+                "menu_options": {
+                    "lock_auth": "Prihlasovacie meno a heslo aplik\u00e1cie SwitchBot",
+                    "lock_key": "\u0160ifrovac\u00ed k\u013e\u00fa\u010d z\u00e1mku"
+                }
+            },
+            "lock_key": {
+                "data": {
+                    "encryption_key": "\u0160ifrovac\u00ed k\u013e\u00fa\u010d",
+                    "key_id": "ID k\u013e\u00fa\u010da"
+                },
+                "description": "Zariadenie {name} vy\u017eaduje \u0161ifrovac\u00ed k\u013e\u00fa\u010d, podrobnosti o tom, ako ho z\u00edska\u0165, n\u00e1jdete v dokument\u00e1cii."
+            },
             "password": {
                 "data": {
                     "password": "Heslo"

homeassistant/components/switchbot/translations/zh-Hant.json

@@ -8,6 +8,7 @@
             "unknown": "\u672a\u9810\u671f\u932f\u8aa4"
         },
         "error": {
+            "auth_failed": "\u9a57\u8b49\u5931\u6557",
             "encryption_key_invalid": "\u91d1\u9470 ID \u6216\u52a0\u5bc6\u91d1\u9470\u7121\u6548",
             "key_id_invalid": "\u91d1\u9470 ID \u6216\u52a0\u5bc6\u91d1\u9470\u7121\u6548"
         },
@@ -16,6 +17,20 @@
             "confirm": {
                 "description": "\u662f\u5426\u8981\u8a2d\u5b9a {name}\uff1f"
             },
+            "lock_auth": {
+                "data": {
+                    "password": "\u5bc6\u78bc",
+                    "username": "\u4f7f\u7528\u8005\u540d\u7a31"
+                },
+                "description": "\u8acb\u63d0\u4f9b SwitchBot app \u4f7f\u7528\u8005\u540d\u7a31\u8207\u5bc6\u78bc\u3002\u6b64\u8cc7\u8a0a\u5c07\u4e0d\u6703\u9032\u884c\u5132\u5b58\u3001\u540c\u6642\u50c5\u4f7f\u7528\u65bc\u63a5\u6536\u9580\u9396\u52a0\u5bc6\u91d1\u9470\u3002"
+            },
+            "lock_chose_method": {
+                "description": "\u9078\u64c7\u8a2d\u5b9a\u6a21\u5f0f\u3001\u8acb\u53c3\u95b1\u6587\u4ef6\u7372\u5f97\u8a73\u7d30\u8cc7\u8a0a\u3002",
+                "menu_options": {
+                    "lock_auth": "SwitchBot app \u767b\u5165\u5e33\u865f\u8207\u5bc6\u78bc",
+                    "lock_key": "\u9580\u9396\u52a0\u5bc6\u91d1\u9470"
+                }
+            },
             "lock_key": {
                 "data": {
                     "encryption_key": "\u52a0\u5bc6\u91d1\u9470",

homeassistant/components/unifiprotect/translations/ca.json

@@ -59,12 +59,12 @@
             "fix_flow": {
                 "step": {
                     "confirm": {
-                        "description": "El servei `unifiprotect.set_doorbell_message` est\u00e0 obsolet, ha canviat per la nova entitat Doorbell Text que s'afegeix a cada dispositiu Doorbell. S'eliminar\u00e0 a la versi\u00f3 2023.3.0. Actualitza-ho perqu\u00e8 utilitzi el [servei `text.set_value`]({link}).",
+                        "description": "El servei `unifiprotect.set_doorbell_message` \u00e9s obsolet, ha canviat per la nova entitat Doorbell Text que s'afegeix a cada dispositiu Doorbell. S'eliminar\u00e0 a la versi\u00f3 2023.3.0. Actualitzeu-ho perqu\u00e8 utilitzi el [servei `text.set_value`]({link}).",
-                        "title": "set_doorbell_message est\u00e0 obsolet"
+                        "title": "El set_doorbell_message \u00e9s obsolet"
                     }
                 }
             },
-            "title": "set_doorbell_message est\u00e0 obsolet"
+            "title": "El set_doorbell_message \u00e9s obsolet"
         },
         "ea_setup_failed": {
             "description": "Est\u00e0s utilitzant la versi\u00f3 v{version} d'UniFi Protect, que \u00e9s una versi\u00f3 d'acc\u00e9s anticipat. S'ha produ\u00eft un error irrecuperable en intentar carregar la integraci\u00f3. [Baixa a una versi\u00f3 estable](https://www.home-assistant.io/integrations/unifiprotect#downgrading-unifi-protect) d'UniFi Protect per continuar utilitzant la integraci\u00f3. \n\n Error: {error}",

homeassistant/components/xbox_live/translations/ca.json

@@ -1,7 +1,7 @@
 {
     "issues": {
         "pending_removal": {
-            "description": "La integraci\u00f3 Xbox Live est\u00e0 pendent d'eliminar-se de Home Assistant i ja no estar\u00e0 disponible a partir de Home Assistant 2023.2. \n\nLa integraci\u00f3 s'est\u00e0 eliminant, perqu\u00e8 nom\u00e9s \u00e9s \u00fatil per dispositius heretats Xbox 360 i l'API actual necessita una subscripci\u00f3 de pagament. Les consoles m\u00e9s noves s\u00f3n compatibles amb la integraci\u00f3 Xbox de forma gratu\u00efta.\n\nElimina la configuraci\u00f3 YAML d'Xbox Live del fitxer configuration.yaml i reinicia Home Assistant per arreglar aquest error.",
+            "description": "La integraci\u00f3 Xbox Live est\u00e0 pendent d'eliminar-se de Home Assistant i ja no estar\u00e0 disponible a partir de Home Assistant 2023.2. \n\nLa integraci\u00f3 s'est\u00e0 eliminant, perqu\u00e8 nom\u00e9s \u00e9s \u00fatil per dispositius heretats Xbox 360 i l'API actual necessita una subscripci\u00f3 de pagament. Les consoles m\u00e9s noves s\u00f3n compatibles amb la integraci\u00f3 Xbox de forma gratu\u00efta.\n\nElimineu la configuraci\u00f3 YAML d'Xbox Live del fitxer configuration.yaml i reinicieu Home Assistant per esmenar aquesta incid\u00e8ncia.",
             "title": "La integraci\u00f3 Xbox Live est\u00e0 sent eliminada"
         }
     }

homeassistant/components/yamaha_musiccast/translations/ca.json

@@ -37,10 +37,10 @@
             "zone_link_audio_delay": {
                 "state": {
                     "audio_sync": "Sincronitzaci\u00f3 d'\u00e0udio",
-                    "audio_sync_off": "Sincronitzaci\u00f3 d'\u00e0udio OFF",
+                    "audio_sync_off": "Sincronitzaci\u00f3 d'\u00e0udio Desactivada",
-                    "audio_sync_on": "Sincronitzaci\u00f3 d'\u00e0udio ON",
+                    "audio_sync_on": "Sincronitzaci\u00f3 d'\u00e0udio Activada",
                     "balanced": "Equilibrat",
-                    "lip_sync": "Sincronitzaci\u00f3 Lip"
+                    "lip_sync": "Sincronitzaci\u00f3 dels llavis"
                 }
             },
             "zone_link_audio_quality": {
@@ -62,7 +62,7 @@
                     "30 min": "30 minuts",
                     "60 min": "60 minuts",
                     "90 min": "90 minuts",
-                    "off": "OFF"
+                    "off": "Desactivat"
                 }
             },
             "zone_surr_decoder_type": {