Tado climate device (#8041)

* added default parameter

* zone overlay can be set with or without a temperature and with or without a duration. Duration is not supported by hass

* Fixes issue #7059 with missing sensorDataPoints

* Fixes issue #6943 added ac_mode

* ac_mode cases
* added fan modes
* changed handling of device state OFF

* fixed an error initializing a dictionary (#6943)

* changed pytado version

* activated pytado debugging

* Changed pyTado version

* mytado.com changed authentication challenge

* Fixed linelength and whitespace issues

* requirements to pytado changed
This commit is contained in:
Wolfgang Malgadey 2017-06-23 18:45:44 +02:00 committed by Fabian Affolter
parent bef22076ea
commit da9430ed12
3 changed files with 85 additions and 36 deletions

View File

@ -24,6 +24,17 @@ CONST_OVERLAY_MANUAL = 'MANUAL'
# the temperature will be reset after a timespan
CONST_OVERLAY_TIMER = 'TIMER'
CONST_MODE_FAN_HIGH = 'HIGH'
CONST_MODE_FAN_MIDDLE = 'MIDDLE'
CONST_MODE_FAN_LOW = 'LOW'
FAN_MODES_LIST = {
CONST_MODE_FAN_HIGH: 'High',
CONST_MODE_FAN_MIDDLE: 'Middle',
CONST_MODE_FAN_LOW: 'Low',
CONST_MODE_OFF: 'Off',
}
OPERATION_LIST = {
CONST_OVERLAY_MANUAL: 'Manual',
CONST_OVERLAY_TIMER: 'Timer',
@ -60,9 +71,15 @@ def create_climate_device(tado, hass, zone, name, zone_id):
capabilities = tado.get_capabilities(zone_id)
unit = TEMP_CELSIUS
min_temp = float(capabilities['temperatures']['celsius']['min'])
max_temp = float(capabilities['temperatures']['celsius']['max'])
ac_mode = capabilities['type'] != 'HEATING'
ac_mode = capabilities['type'] == 'AIR_CONDITIONING'
if ac_mode:
temperatures = capabilities['HEAT']['temperatures']
else:
temperatures = capabilities['temperatures']
min_temp = float(temperatures['celsius']['min'])
max_temp = float(temperatures['celsius']['max'])
data_id = 'zone {} {}'.format(name, zone_id)
device = TadoClimate(tado,
@ -107,7 +124,9 @@ class TadoClimate(ClimateDevice):
self._max_temp = max_temp
self._target_temp = None
self._tolerance = tolerance
self._cooling = False
self._current_fan = CONST_MODE_OFF
self._current_operation = CONST_MODE_SMART_SCHEDULE
self._overlay_mode = CONST_MODE_SMART_SCHEDULE
@ -129,13 +148,32 @@ class TadoClimate(ClimateDevice):
@property
def current_operation(self):
"""Return current readable operation mode."""
return OPERATION_LIST.get(self._current_operation)
if self._cooling:
return "Cooling"
else:
return OPERATION_LIST.get(self._current_operation)
@property
def operation_list(self):
"""Return the list of available operation modes (readable)."""
return list(OPERATION_LIST.values())
@property
def current_fan_mode(self):
"""Return the fan setting."""
if self.ac_mode:
return FAN_MODES_LIST.get(self._current_fan)
else:
return None
@property
def fan_list(self):
"""List of available fan modes."""
if self.ac_mode:
return list(FAN_MODES_LIST.values())
else:
return None
@property
def temperature_unit(self):
"""Return the unit of measurement used by the platform."""
@ -205,27 +243,27 @@ class TadoClimate(ClimateDevice):
if 'sensorDataPoints' in data:
sensor_data = data['sensorDataPoints']
temperature = float(
sensor_data['insideTemperature']['celsius'])
humidity = float(
sensor_data['humidity']['percentage'])
setting = 0
unit = TEMP_CELSIUS
if 'insideTemperature' in sensor_data:
temperature = float(
sensor_data['insideTemperature']['celsius'])
self._cur_temp = self.hass.config.units.temperature(
temperature, unit)
if 'humidity' in sensor_data:
humidity = float(
sensor_data['humidity']['percentage'])
self._cur_humidity = humidity
# temperature setting will not exist when device is off
if 'temperature' in data['setting'] and \
data['setting']['temperature'] is not None:
setting = float(
data['setting']['temperature']['celsius'])
unit = TEMP_CELSIUS
self._cur_temp = self.hass.config.units.temperature(
temperature, unit)
self._target_temp = self.hass.config.units.temperature(
setting, unit)
self._cur_humidity = humidity
self._target_temp = self.hass.config.units.temperature(
setting, unit)
if 'tadoMode' in data:
mode = data['tadoMode']
@ -235,29 +273,39 @@ class TadoClimate(ClimateDevice):
power = data['setting']['power']
if power == 'OFF':
self._current_operation = CONST_MODE_OFF
self._current_fan = CONST_MODE_OFF
# There is no overlay, the mode will always be
# "SMART_SCHEDULE"
self._overlay_mode = CONST_MODE_SMART_SCHEDULE
self._device_is_active = False
else:
self._device_is_active = True
if 'overlay' in data and data['overlay'] is not None:
overlay = True
termination = data['overlay']['termination']['type']
else:
if self._device_is_active:
overlay = False
termination = ""
overlay_data = None
termination = self._current_operation
cooling = False
fan_speed = CONST_MODE_OFF
# If you set mode manualy to off, there will be an overlay
# and a termination, but we want to see the mode "OFF"
if 'overlay' in data:
overlay_data = data['overlay']
overlay = overlay_data is not None
if overlay:
termination = overlay_data['termination']['type']
if 'setting' in overlay_data:
cooling = overlay_data['setting']['mode'] == 'COOL'
fan_speed = overlay_data['setting']['fanSpeed']
# If you set mode manualy to off, there will be an overlay
# and a termination, but we want to see the mode "OFF"
if overlay and self._device_is_active:
# There is an overlay the device is on
self._overlay_mode = termination
self._current_operation = termination
else:
# There is no overlay, the mode will always be
# "SMART_SCHEDULE"
self._overlay_mode = CONST_MODE_SMART_SCHEDULE
self._current_operation = CONST_MODE_SMART_SCHEDULE
self._cooling = cooling
self._current_fan = fan_speed
def _control_heating(self):
"""Send new target temperature to mytado."""

View File

@ -16,8 +16,8 @@ from homeassistant.const import CONF_USERNAME, CONF_PASSWORD
from homeassistant.util import Throttle
REQUIREMENTS = ['https://github.com/wmalgadey/PyTado/archive/'
'0.1.10.zip#'
'PyTado==0.1.10']
'0.2.1.zip#'
'PyTado==0.2.1']
_LOGGER = logging.getLogger(__name__)
@ -47,6 +47,7 @@ def setup(hass, config):
try:
tado = Tado(username, password)
tado.setDebugging(True)
except (RuntimeError, urllib.error.HTTPError):
_LOGGER.error("Unable to connect to mytado with username and password")
return False

View File

@ -307,7 +307,7 @@ https://github.com/soldag/pyflic/archive/0.4.zip#pyflic==0.4
https://github.com/tfriedel/python-lightify/archive/1bb1db0e7bd5b14304d7bb267e2398cd5160df46.zip#lightify==1.0.5
# homeassistant.components.tado
https://github.com/wmalgadey/PyTado/archive/0.1.10.zip#PyTado==0.1.10
https://github.com/wmalgadey/PyTado/archive/0.2.1.zip#PyTado==0.2.1
# homeassistant.components.media_player.lg_netcast
https://github.com/wokar/pylgnetcast/archive/v0.2.0.zip#pylgnetcast==0.2.0