diff --git a/homeassistant/components/adguard/translations/pl.json b/homeassistant/components/adguard/translations/pl.json
index 7b2886b660e..71264e906e4 100644
--- a/homeassistant/components/adguard/translations/pl.json
+++ b/homeassistant/components/adguard/translations/pl.json
@@ -16,7 +16,7 @@
             },
             "user": {
                 "data": {
-                    "host": "Host",
+                    "host": "Nazwa hosta lub adres IP",
                     "password": "Has\u0142o",
                     "port": "Port",
                     "ssl": "AdGuard Home u\u017cywa certyfikatu SSL",
diff --git a/homeassistant/components/airvisual/translations/lb.json b/homeassistant/components/airvisual/translations/lb.json
index d5f78eccf0b..52e55242a05 100644
--- a/homeassistant/components/airvisual/translations/lb.json
+++ b/homeassistant/components/airvisual/translations/lb.json
@@ -1,11 +1,11 @@
 {
     "config": {
         "abort": {
-            "already_configured": "D\u00ebs Koordinate si schon registr\u00e9iert."
+            "already_configured": "D\u00ebs Koordinate oder ode/Pro ID si schon registr\u00e9iert."
         },
         "error": {
             "general_error": "Onbekannten Feeler",
-            "invalid_api_key": "Ong\u00ebltegen API Schl\u00ebssel",
+            "invalid_api_key": "Ong\u00ebltegen API Schl\u00ebssel uginn",
             "unable_to_connect": "Kann sech net mat der Node/Pri verbannen."
         },
         "step": {
diff --git a/homeassistant/components/airvisual/translations/no.json b/homeassistant/components/airvisual/translations/no.json
index 77ab1425c87..a528c98e04c 100644
--- a/homeassistant/components/airvisual/translations/no.json
+++ b/homeassistant/components/airvisual/translations/no.json
@@ -1,7 +1,7 @@
 {
     "config": {
         "abort": {
-            "already_configured": "Disse koordinatene er allerede registrert."
+            "already_configured": "Disse koordinatene eller Node / Pro ID er allerede registrert."
         },
         "error": {
             "general_error": "Det oppstod en ukjent feil.",
@@ -35,7 +35,7 @@
                     "node_pro": "AirVisual Node Pro",
                     "type": "Integrasjonstype"
                 },
-                "description": "Overv\u00e5k luftkvaliteten p\u00e5 et geografisk sted.",
+                "description": "Velg hvilken type AirVisual-data du vil overv\u00e5ke.",
                 "title": "Konfigurer AirVisual"
             }
         }
diff --git a/homeassistant/components/airvisual/translations/pl.json b/homeassistant/components/airvisual/translations/pl.json
index cb73ed656f2..8687a2ead03 100644
--- a/homeassistant/components/airvisual/translations/pl.json
+++ b/homeassistant/components/airvisual/translations/pl.json
@@ -4,14 +4,34 @@
             "already_configured": "Ten klucz API jest ju\u017c w u\u017cyciu."
         },
         "error": {
-            "invalid_api_key": "Nieprawid\u0142owy klucz API"
+            "general_error": "Nieznany b\u0142\u0105d",
+            "invalid_api_key": "Nieprawid\u0142owy klucz API",
+            "unable_to_connect": "Nie mo\u017cna po\u0142\u0105czy\u0107 si\u0119 z jednostk\u0105 Node/Pro."
         },
         "step": {
-            "user": {
+            "geography": {
                 "data": {
                     "api_key": "Klucz API",
                     "latitude": "Szeroko\u015b\u0107 geograficzna",
+                    "longitude": "D\u0142ugo\u015b\u0107 geograficzna"
+                },
+                "title": "Konfiguracja Geography"
+            },
+            "node_pro": {
+                "data": {
+                    "ip_address": "Nazwa hosta lub adres IP jednostki",
+                    "password": "Has\u0142o jednostki"
+                },
+                "description": "Has\u0142o",
+                "title": "Konfiguracja AirVisual Node/Pro"
+            },
+            "user": {
+                "data": {
+                    "api_key": "Klucz API",
+                    "cloud_api": "Lokalizacja geograficzna",
+                    "latitude": "Szeroko\u015b\u0107 geograficzna",
                     "longitude": "D\u0142ugo\u015b\u0107 geograficzna",
+                    "node_pro": "AirVisual Node Pro",
                     "type": "Typ integracji"
                 },
                 "description": "Monitoruj jako\u015b\u0107 powietrza w okre\u015blonej lokalizacji geograficznej.",
diff --git a/homeassistant/components/atag/translations/pl.json b/homeassistant/components/atag/translations/pl.json
new file mode 100644
index 00000000000..e931c1fc10f
--- /dev/null
+++ b/homeassistant/components/atag/translations/pl.json
@@ -0,0 +1,20 @@
+{
+    "config": {
+        "abort": {
+            "already_configured": "Do Home Assistant mo\u017cna doda\u0107 tylko jedno urz\u0105dzenie Atag"
+        },
+        "error": {
+            "connection_error": "Nie mo\u017cna nawi\u0105za\u0107 po\u0142\u0105czenia, spr\u00f3buj ponownie."
+        },
+        "step": {
+            "user": {
+                "data": {
+                    "host": "Nazwa hosta lub adres IP",
+                    "port": "Port (10000)"
+                },
+                "title": "Po\u0142\u0105cz z urz\u0105dzeniem"
+            }
+        }
+    },
+    "title": "Atag"
+}
\ No newline at end of file
diff --git a/homeassistant/components/axis/translations/pl.json b/homeassistant/components/axis/translations/pl.json
index cc53bafb57d..7473c62f668 100644
--- a/homeassistant/components/axis/translations/pl.json
+++ b/homeassistant/components/axis/translations/pl.json
@@ -16,7 +16,7 @@
         "step": {
             "user": {
                 "data": {
-                    "host": "Host",
+                    "host": "Nazwa hosta lub adres IP",
                     "password": "Has\u0142o",
                     "port": "Port",
                     "username": "Nazwa u\u017cytkownika"
diff --git a/homeassistant/components/climate/translations/no.json b/homeassistant/components/climate/translations/no.json
index 900022c4709..4e9722bb207 100644
--- a/homeassistant/components/climate/translations/no.json
+++ b/homeassistant/components/climate/translations/no.json
@@ -16,7 +16,12 @@
     },
     "state": {
         "_": {
-            "heat": "Varme"
+            "auto": "Auto",
+            "cool": "Kj\u00f8le",
+            "dry": "T\u00f8rr",
+            "fan_only": "Kun vifte",
+            "heat": "Varme",
+            "heat_cool": "Varme/kj\u00f8lig"
         }
     },
     "title": "Klima"
diff --git a/homeassistant/components/configurator/translations/no.json b/homeassistant/components/configurator/translations/no.json
index 099945f6201..1f923920583 100644
--- a/homeassistant/components/configurator/translations/no.json
+++ b/homeassistant/components/configurator/translations/no.json
@@ -1,3 +1,9 @@
 {
+    "state": {
+        "_": {
+            "configure": "Konfigurer",
+            "configured": "Konfigurert"
+        }
+    },
     "title": "Konfigurator"
 }
\ No newline at end of file
diff --git a/homeassistant/components/coolmaster/translations/pl.json b/homeassistant/components/coolmaster/translations/pl.json
index 8407a8429b6..9b0e4bc5846 100644
--- a/homeassistant/components/coolmaster/translations/pl.json
+++ b/homeassistant/components/coolmaster/translations/pl.json
@@ -12,7 +12,7 @@
                     "fan_only": "Obs\u0142uga trybu \"tylko wentylator\"",
                     "heat": "Obs\u0142uga trybu grzania",
                     "heat_cool": "Obs\u0142uga automatycznego trybu grzanie/ch\u0142odzenie",
-                    "host": "Host",
+                    "host": "Nazwa hosta lub adres IP",
                     "off": "Mo\u017ce by\u0107 wy\u0142\u0105czone"
                 },
                 "title": "Skonfiguruj szczeg\u00f3\u0142y po\u0142\u0105czenia CoolMasterNet."
diff --git a/homeassistant/components/cover/translations/no.json b/homeassistant/components/cover/translations/no.json
index 840ede020f4..4d898ec75f8 100644
--- a/homeassistant/components/cover/translations/no.json
+++ b/homeassistant/components/cover/translations/no.json
@@ -28,6 +28,7 @@
     "state": {
         "_": {
             "closing": "Lukker",
+            "opening": "\u00c5pner",
             "stopped": "Stoppet"
         }
     },
diff --git a/homeassistant/components/daikin/translations/pl.json b/homeassistant/components/daikin/translations/pl.json
index e4444c3f0c1..2e2f65bc008 100644
--- a/homeassistant/components/daikin/translations/pl.json
+++ b/homeassistant/components/daikin/translations/pl.json
@@ -8,7 +8,7 @@
         "step": {
             "user": {
                 "data": {
-                    "host": "Host"
+                    "host": "Nazwa hosta lub adres IP"
                 },
                 "description": "Wprowad\u017a adres IP Daikin AC.",
                 "title": "Konfiguracja Daikin AC"
diff --git a/homeassistant/components/deconz/translations/pl.json b/homeassistant/components/deconz/translations/pl.json
index 0b9f336e9cd..a9bff098644 100644
--- a/homeassistant/components/deconz/translations/pl.json
+++ b/homeassistant/components/deconz/translations/pl.json
@@ -26,15 +26,29 @@
             },
             "manual_confirm": {
                 "data": {
-                    "host": "Host",
+                    "host": "Nazwa hosta lub adres IP",
                     "port": "Port"
                 }
+            },
+            "manual_input": {
+                "data": {
+                    "host": "Nazwa hosta lub adres IP",
+                    "port": "Port"
+                },
+                "title": "Konfiguracja bramki deCONZ"
+            },
+            "user": {
+                "data": {
+                    "host": "Wybierz znalezion\u0105 bramk\u0119 deCONZ"
+                },
+                "title": "Wybierz bramk\u0119 deCONZ"
             }
         }
     },
     "device_automation": {
         "trigger_subtype": {
             "both_buttons": "oba przyciski",
+            "bottom_buttons": "Dolne przyciski",
             "button_1": "pierwszy przycisk",
             "button_2": "drugi przycisk",
             "button_3": "trzeci przycisk",
@@ -51,6 +65,7 @@
             "side_4": "strona 4",
             "side_5": "strona 5",
             "side_6": "strona 6",
+            "top_buttons": "G\u00f3rne przyciski",
             "turn_off": "nast\u0105pi wy\u0142\u0105czenie",
             "turn_on": "nast\u0105pi w\u0142\u0105czenie"
         },
diff --git a/homeassistant/components/demo/translations/lb.json b/homeassistant/components/demo/translations/lb.json
index 3787d37750c..864a3603f3d 100644
--- a/homeassistant/components/demo/translations/lb.json
+++ b/homeassistant/components/demo/translations/lb.json
@@ -4,7 +4,7 @@
             "init": {
                 "data": {
                     "one": "Een",
-                    "other": "Aner"
+                    "other": "M\u00e9i"
                 }
             },
             "options_1": {
diff --git a/homeassistant/components/doorbird/translations/pl.json b/homeassistant/components/doorbird/translations/pl.json
index f113b12783d..61511297468 100644
--- a/homeassistant/components/doorbird/translations/pl.json
+++ b/homeassistant/components/doorbird/translations/pl.json
@@ -1,13 +1,16 @@
 {
     "config": {
         "abort": {
-            "already_configured": "BoorBird jest ju\u017c skonfigurowany."
+            "already_configured": "BoorBird jest ju\u017c skonfigurowany.",
+            "link_local_address": "Po\u0142\u0105czenie lokalnego adresu nie jest obs\u0142ugiwane",
+            "not_doorbird_device": "To urz\u0105dzenie nie jest urz\u0105dzeniem DoorBird"
         },
         "error": {
             "cannot_connect": "Nie mo\u017cna nawi\u0105za\u0107 po\u0142\u0105czenia, spr\u00f3buj ponownie.",
             "invalid_auth": "Niepoprawne uwierzytelnienie.",
             "unknown": "Niespodziewany b\u0142\u0105d."
         },
+        "flow_title": "DoorBird {name} ({host})",
         "step": {
             "user": {
                 "data": {
diff --git a/homeassistant/components/elkm1/translations/pl.json b/homeassistant/components/elkm1/translations/pl.json
new file mode 100644
index 00000000000..3a445b1008c
--- /dev/null
+++ b/homeassistant/components/elkm1/translations/pl.json
@@ -0,0 +1,27 @@
+{
+    "config": {
+        "abort": {
+            "address_already_configured": "ElkM1 z tym adresem jest ju\u017c skonfigurowany.",
+            "already_configured": "ElkM1 z tym prefiksem jest ju\u017c skonfigurowany."
+        },
+        "error": {
+            "cannot_connect": "Nie mo\u017cna nawi\u0105za\u0107 po\u0142\u0105czenia, spr\u00f3buj ponownie.",
+            "invalid_auth": "Niepoprawne uwierzytelnienie.",
+            "unknown": "Niespodziewany b\u0142\u0105d."
+        },
+        "step": {
+            "user": {
+                "data": {
+                    "address": "Adres IP, domena lub port szeregowy w przypadku po\u0142\u0105czenia szeregowego.",
+                    "password": "Has\u0142o (tylko bezpieczne).",
+                    "prefix": "Unikatowy prefiks (pozostaw pusty, je\u015bli masz tylko jeden ElkM1).",
+                    "protocol": "Protok\u00f3\u0142",
+                    "temperature_unit": "Jednostka temperatury u\u017cywanej przez ElkM1.",
+                    "username": "Nazwa u\u017cytkownika (tylko bezpieczne)"
+                },
+                "description": "Adres musi by\u0107 w postaci 'adres[:port]' dla tryb\u00f3w 'zabezpieczony' i 'niezabezpieczony'. Przyk\u0142ad: '192.168.1.1'. Port jest opcjonalny i domy\u015blnie ustawiony na 2101 dla po\u0142\u0105cze\u0144 'niezabezpieczonych' i 2601 dla 'zabezpieczonych'. W przypadku protoko\u0142u szeregowego adres musi by\u0107 w formie 'tty[:baudrate]'. Przyk\u0142ad: '/dev/ttyS1'. Warto\u015b\u0107 transmisji jest opcjonalna i domy\u015blnie wynosi 115200.",
+                "title": "Pod\u0142\u0105czenie do sterownika Elk-M1"
+            }
+        }
+    }
+}
\ No newline at end of file
diff --git a/homeassistant/components/emulated_roku/translations/lb.json b/homeassistant/components/emulated_roku/translations/lb.json
index e797c38781e..94ff88f9715 100644
--- a/homeassistant/components/emulated_roku/translations/lb.json
+++ b/homeassistant/components/emulated_roku/translations/lb.json
@@ -17,5 +17,5 @@
             }
         }
     },
-    "title": "EmulatedRoku"
+    "title": "Emul\u00e9ierte Roku"
 }
\ No newline at end of file
diff --git a/homeassistant/components/emulated_roku/translations/pl.json b/homeassistant/components/emulated_roku/translations/pl.json
index fcc37de1d2c..6ce1c17e5d8 100644
--- a/homeassistant/components/emulated_roku/translations/pl.json
+++ b/homeassistant/components/emulated_roku/translations/pl.json
@@ -8,7 +8,7 @@
                 "data": {
                     "advertise_ip": "IP rozg\u0142aszania",
                     "advertise_port": "Port rozg\u0142aszania",
-                    "host_ip": "IP hosta",
+                    "host_ip": "Adres IP",
                     "listen_port": "Port nas\u0142uchu",
                     "name": "Nazwa",
                     "upnp_bind_multicast": "Powi\u0105\u017c multicast (prawda/fa\u0142sz)"
diff --git a/homeassistant/components/esphome/translations/lb.json b/homeassistant/components/esphome/translations/lb.json
index 8d00a3d98e5..9bfc78af28c 100644
--- a/homeassistant/components/esphome/translations/lb.json
+++ b/homeassistant/components/esphome/translations/lb.json
@@ -27,7 +27,7 @@
                     "port": "Port"
                 },
                 "description": "Gitt Verbindungs Informatioune vun \u00e4rem [ESPHome](https://esphomelib.com/) an.",
-                "title": "[%key:component::esphome::title%]"
+                "title": "ESPHome"
             }
         }
     }
diff --git a/homeassistant/components/esphome/translations/pl.json b/homeassistant/components/esphome/translations/pl.json
index a2e56e09802..c74b3d57e93 100644
--- a/homeassistant/components/esphome/translations/pl.json
+++ b/homeassistant/components/esphome/translations/pl.json
@@ -23,7 +23,7 @@
             },
             "user": {
                 "data": {
-                    "host": "Host",
+                    "host": "Nazwa hosta lub adres IP",
                     "port": "Port"
                 },
                 "description": "Wprowad\u017a ustawienia po\u0142\u0105czenia [ESPHome](https://esphomelib.com/) w\u0119z\u0142a.",
diff --git a/homeassistant/components/flume/translations/lb.json b/homeassistant/components/flume/translations/lb.json
index aad8a496a11..67f18d61547 100644
--- a/homeassistant/components/flume/translations/lb.json
+++ b/homeassistant/components/flume/translations/lb.json
@@ -16,6 +16,7 @@
                     "password": "Passwuert",
                     "username": "Benotzernumm"
                 },
+                "description": "Fir k\u00ebnnen op Flume Personal API z'acc\u00e9d\u00e9ieren muss du eng 'Client ID' an eng 'Client Secret' op https://portal.flumetech.com/settings#token ufroen.",
                 "title": "Verbann dech mat dengem Flume Kont."
             }
         }
diff --git a/homeassistant/components/flume/translations/pl.json b/homeassistant/components/flume/translations/pl.json
new file mode 100644
index 00000000000..55dfceac11f
--- /dev/null
+++ b/homeassistant/components/flume/translations/pl.json
@@ -0,0 +1,24 @@
+{
+    "config": {
+        "abort": {
+            "already_configured": "To konto jest ju\u017c skonfigurowane."
+        },
+        "error": {
+            "cannot_connect": "Nie mo\u017cna nawi\u0105za\u0107 po\u0142\u0105czenia, spr\u00f3buj ponownie.",
+            "invalid_auth": "Niepoprawne uwierzytelnienie.",
+            "unknown": "Niespodziewany b\u0142\u0105d."
+        },
+        "step": {
+            "user": {
+                "data": {
+                    "client_id": "Identyfikator klienta",
+                    "client_secret": "Has\u0142o klienta",
+                    "password": "Has\u0142o",
+                    "username": "Nazwa u\u017cytkownika"
+                },
+                "description": "Aby uzyska\u0107 dost\u0119p do API Flume, musisz poprosi\u0107 o 'ID klienta\u201d i 'klucz tajny klienta' na stronie https://portal.flumetech.com/settings#token",
+                "title": "Po\u0142\u0105cz z kontem Flume"
+            }
+        }
+    }
+}
\ No newline at end of file
diff --git a/homeassistant/components/flunearyou/translations/pl.json b/homeassistant/components/flunearyou/translations/pl.json
new file mode 100644
index 00000000000..e674d422903
--- /dev/null
+++ b/homeassistant/components/flunearyou/translations/pl.json
@@ -0,0 +1,18 @@
+{
+    "config": {
+        "abort": {
+            "already_configured": "Wsp\u00f3\u0142rz\u0119dne s\u0105 ju\u017c zarejestrowane."
+        },
+        "error": {
+            "general_error": "Nieznany b\u0142\u0105d"
+        },
+        "step": {
+            "user": {
+                "data": {
+                    "latitude": "Szeroko\u015b\u0107 geograficzna",
+                    "longitude": "D\u0142ugo\u015b\u0107 geograficzna"
+                }
+            }
+        }
+    }
+}
\ No newline at end of file
diff --git a/homeassistant/components/freebox/translations/pl.json b/homeassistant/components/freebox/translations/pl.json
index 084dd70ee52..9df523af0fb 100644
--- a/homeassistant/components/freebox/translations/pl.json
+++ b/homeassistant/components/freebox/translations/pl.json
@@ -15,7 +15,7 @@
             },
             "user": {
                 "data": {
-                    "host": "Host",
+                    "host": "Nazwa hosta lub adres IP",
                     "port": "Port"
                 },
                 "title": "Freebox"
diff --git a/homeassistant/components/fritzbox/translations/pl.json b/homeassistant/components/fritzbox/translations/pl.json
new file mode 100644
index 00000000000..50ffd461d4c
--- /dev/null
+++ b/homeassistant/components/fritzbox/translations/pl.json
@@ -0,0 +1,32 @@
+{
+    "config": {
+        "abort": {
+            "already_configured": "Ten AVM FRITZ!Box jest ju\u017c skonfigurowany.",
+            "already_in_progress": "Konfiguracja AVM FRITZ!Box jest ju\u017c w toku.",
+            "not_found": "W sieci nie znaleziono obs\u0142ugiwanego urz\u0105dzenia AVM FRITZ!Box."
+        },
+        "error": {
+            "auth_failed": "Nazwa u\u017cytkownika i/lub has\u0142o s\u0105 nieprawid\u0142owe."
+        },
+        "flow_title": "AVM FRITZ!Box: {name}",
+        "step": {
+            "confirm": {
+                "data": {
+                    "password": "Has\u0142o",
+                    "username": "Nazwa u\u017cytkownika"
+                },
+                "description": "Czy chcesz skonfigurowa\u0107 {name}?",
+                "title": "AVM FRITZ! Box"
+            },
+            "user": {
+                "data": {
+                    "host": "Nazwa hosta lub adres IP",
+                    "password": "Has\u0142o",
+                    "username": "Nazwa u\u017cytkownika"
+                },
+                "description": "Wprowad\u017a informacje o urz\u0105dzeniu AVM FRITZ! Box.",
+                "title": "AVM FRITZ! Box"
+            }
+        }
+    }
+}
\ No newline at end of file
diff --git a/homeassistant/components/glances/translations/pl.json b/homeassistant/components/glances/translations/pl.json
index b0dcfe0c36f..25179e951ad 100644
--- a/homeassistant/components/glances/translations/pl.json
+++ b/homeassistant/components/glances/translations/pl.json
@@ -10,7 +10,7 @@
         "step": {
             "user": {
                 "data": {
-                    "host": "Host",
+                    "host": "Nazwa hosta lub adres IP",
                     "name": "Nazwa",
                     "password": "Has\u0142o",
                     "port": "Port",
diff --git a/homeassistant/components/group/translations/lb.json b/homeassistant/components/group/translations/lb.json
index 7eab2528c34..aaa9e7b9d81 100644
--- a/homeassistant/components/group/translations/lb.json
+++ b/homeassistant/components/group/translations/lb.json
@@ -13,5 +13,5 @@
             "unlocked": "Net gespaart"
         }
     },
-    "title": "Gruppe"
+    "title": "Grupp"
 }
\ No newline at end of file
diff --git a/homeassistant/components/heos/translations/pl.json b/homeassistant/components/heos/translations/pl.json
index fbba14d88d6..0c0b9ade13f 100644
--- a/homeassistant/components/heos/translations/pl.json
+++ b/homeassistant/components/heos/translations/pl.json
@@ -9,8 +9,8 @@
         "step": {
             "user": {
                 "data": {
-                    "access_token": "Host",
-                    "host": "Host"
+                    "access_token": "Nazwa hosta lub adres IP",
+                    "host": "Nazwa hosta lub adres IP"
                 },
                 "description": "Wprowad\u017a nazw\u0119 hosta lub adres IP urz\u0105dzenia Heos (najlepiej pod\u0142\u0105czonego przewodowo do sieci).",
                 "title": "Po\u0142\u0105czenie z Heos"
diff --git a/homeassistant/components/homekit_controller/translations/lb.json b/homeassistant/components/homekit_controller/translations/lb.json
index 148d344eaea..c840cb4e9fc 100644
--- a/homeassistant/components/homekit_controller/translations/lb.json
+++ b/homeassistant/components/homekit_controller/translations/lb.json
@@ -36,5 +36,5 @@
             }
         }
     },
-    "title": "HomeKit Accessoire"
+    "title": "HomeKit Kontroller"
 }
\ No newline at end of file
diff --git a/homeassistant/components/hue/translations/pl.json b/homeassistant/components/hue/translations/pl.json
index fa9f3f5abc5..b1f635026e6 100644
--- a/homeassistant/components/hue/translations/pl.json
+++ b/homeassistant/components/hue/translations/pl.json
@@ -17,7 +17,7 @@
         "step": {
             "init": {
                 "data": {
-                    "host": "Host"
+                    "host": "Nazwa hosta lub adres IP"
                 },
                 "title": "Wybierz mostek Hue"
             },
@@ -26,5 +26,26 @@
                 "title": "Hub Link"
             }
         }
+    },
+    "device_automation": {
+        "trigger_subtype": {
+            "button_1": "pierwszy przycisk",
+            "button_2": "drugi przycisk",
+            "button_3": "trzeci przycisk",
+            "button_4": "czwarty przycisk",
+            "dim_down": "nast\u0105pi zmniejszenie jasno\u015bci",
+            "dim_up": "nast\u0105pi zwi\u0119kszenie jasno\u015bci",
+            "double_buttons_1_3": "Przyciski pierwszy i trzeci",
+            "double_buttons_2_4": "Przyciski drugi i czwarty",
+            "turn_off": "Nast\u0105pi wy\u0142\u0105czenie",
+            "turn_on": "Nast\u0105pi w\u0142\u0105czenie"
+        },
+        "trigger_type": {
+            "remote_button_long_release": "\"{subtype}\" zostanie zwolniony po d\u0142ugim naci\u015bni\u0119ciu",
+            "remote_button_short_press": "\"{subtype}\" zostanie naci\u015bni\u0119ty",
+            "remote_button_short_release": "\"{subtype}\" zostanie zwolniony",
+            "remote_double_button_long_press": "Obydwa \"{subtype}\" zostanie zwolniony po d\u0142ugim naci\u015bni\u0119ciu",
+            "remote_double_button_short_press": "Obydwa \"{subtype}\" zostanie zwolniony"
+        }
     }
 }
\ No newline at end of file
diff --git a/homeassistant/components/icloud/translations/pl.json b/homeassistant/components/icloud/translations/pl.json
index a4c7f1f8d9c..20e3f8c2fb4 100644
--- a/homeassistant/components/icloud/translations/pl.json
+++ b/homeassistant/components/icloud/translations/pl.json
@@ -20,7 +20,7 @@
             "user": {
                 "data": {
                     "password": "Has\u0142o",
-                    "username": "E-mail",
+                    "username": "Adres e-mail",
                     "with_family": "Z rodzin\u0105"
                 },
                 "description": "Wprowad\u017a dane uwierzytelniaj\u0105ce",
diff --git a/homeassistant/components/ipp/translations/pl.json b/homeassistant/components/ipp/translations/pl.json
index 0de012d7163..8bc57941cb6 100644
--- a/homeassistant/components/ipp/translations/pl.json
+++ b/homeassistant/components/ipp/translations/pl.json
@@ -1,7 +1,34 @@
 {
     "config": {
         "abort": {
+            "already_configured": "Ta drukarka jest ju\u017c skonfigurowana.",
+            "connection_error": "Nie mo\u017cna nawi\u0105za\u0107 po\u0142\u0105czenia z drukark\u0105.",
+            "connection_upgrade": "Nie mo\u017cna po\u0142\u0105czy\u0107 si\u0119 z drukark\u0105 z powodu konieczno\u015bci uaktualnienia po\u0142\u0105czenia.",
+            "ipp_error": "Wyst\u0105pi\u0142 b\u0142\u0105d IPP.",
+            "ipp_version_error": "Wersja IPP nie obs\u0142ugiwana przez drukark\u0119.",
             "parse_error": "Nie mo\u017cna przeanalizowa\u0107 odpowiedzi z drukarki."
+        },
+        "error": {
+            "connection_error": "Nie mo\u017cna nawi\u0105za\u0107 po\u0142\u0105czenia z drukark\u0105.",
+            "connection_upgrade": "Nie mo\u017cna po\u0142\u0105czy\u0107 si\u0119 z drukark\u0105. Spr\u00f3buj ponownie z zaznaczon\u0105 opcj\u0105 SSL/TLS."
+        },
+        "flow_title": "Drukarka: {name}",
+        "step": {
+            "user": {
+                "data": {
+                    "base_path": "\u015acie\u017cka wzgl\u0119dna do drukarki",
+                    "host": "Nazwa hosta lub adres IP",
+                    "port": "Port",
+                    "ssl": "Drukarka obs\u0142uguje komunikacj\u0119 przez SSL/TLS",
+                    "verify_ssl": "Drukarka u\u017cywa prawid\u0142owego certyfikatu"
+                },
+                "description": "Skonfiguruj drukark\u0119 za pomoc\u0105 protoko\u0142u IPP (Internet Printing Protocol) w celu integracji z Home Assistant.",
+                "title": "Po\u0142\u0105cz swoj\u0105 drukark\u0119"
+            },
+            "zeroconf_confirm": {
+                "description": "Czy chcesz doda\u0107 drukark\u0119 o nazwie `{name}` do Home Assistant'a?",
+                "title": "Wykryto drukark\u0119"
+            }
         }
     }
 }
\ No newline at end of file
diff --git a/homeassistant/components/islamic_prayer_times/translations/pl.json b/homeassistant/components/islamic_prayer_times/translations/pl.json
new file mode 100644
index 00000000000..a706e6a0596
--- /dev/null
+++ b/homeassistant/components/islamic_prayer_times/translations/pl.json
@@ -0,0 +1,23 @@
+{
+    "config": {
+        "abort": {
+            "one_instance_allowed": "Wymagana jest tylko jedna instancja."
+        },
+        "step": {
+            "user": {
+                "description": "Czy chcesz skonfigurowa\u0107 Islamskie czasy modlitwy?",
+                "title": "Skonfiguruj Islamskie czasy modlitwy"
+            }
+        }
+    },
+    "options": {
+        "step": {
+            "init": {
+                "data": {
+                    "calc_method": "Metoda kalkulacji modlitwy"
+                }
+            }
+        }
+    },
+    "title": "Islamskie czasy modlitwy"
+}
\ No newline at end of file
diff --git a/homeassistant/components/konnected/translations/pl.json b/homeassistant/components/konnected/translations/pl.json
index f41ceea26f4..860d90536da 100644
--- a/homeassistant/components/konnected/translations/pl.json
+++ b/homeassistant/components/konnected/translations/pl.json
@@ -96,6 +96,7 @@
                 "data": {
                     "activation": "Wyj\u015bcie, gdy w\u0142\u0105czone",
                     "momentary": "Czas trwania impulsu (ms) (opcjonalnie)",
+                    "more_states": "Konfigurowanie dodatkowych stan\u00f3w dla tej strefy",
                     "name": "Nazwa (opcjonalnie)",
                     "pause": "Przerwa mi\u0119dzy impulsami (ms) (opcjonalnie)",
                     "repeat": "Ilo\u015b\u0107 powt\u00f3rze\u0144 (-1=niesko\u0144czenie) (opcjonalnie)"
diff --git a/homeassistant/components/local_ip/translations/pl.json b/homeassistant/components/local_ip/translations/pl.json
index c5ae118ef2c..5f8b977dc6e 100644
--- a/homeassistant/components/local_ip/translations/pl.json
+++ b/homeassistant/components/local_ip/translations/pl.json
@@ -1,5 +1,8 @@
 {
     "config": {
+        "abort": {
+            "single_instance_allowed": "Dozwolona jest tylko jedna konfiguracja z lokalnym adresem IP."
+        },
         "step": {
             "user": {
                 "data": {
diff --git a/homeassistant/components/lock/translations/lb.json b/homeassistant/components/lock/translations/lb.json
index 634e51234d7..879f98b6498 100644
--- a/homeassistant/components/lock/translations/lb.json
+++ b/homeassistant/components/lock/translations/lb.json
@@ -20,5 +20,5 @@
             "unlocked": "Net gespaart"
         }
     },
-    "title": "Schlass"
+    "title": "Sp\u00e4ren"
 }
\ No newline at end of file
diff --git a/homeassistant/components/mailgun/translations/lb.json b/homeassistant/components/mailgun/translations/lb.json
index e416bdc6a64..10504b88214 100644
--- a/homeassistant/components/mailgun/translations/lb.json
+++ b/homeassistant/components/mailgun/translations/lb.json
@@ -5,7 +5,7 @@
             "one_instance_allowed": "N\u00ebmmen eng eenzeg Instanz ass n\u00e9ideg."
         },
         "create_entry": {
-            "default": "Fir Evenementer un Home Assistant ze sch\u00e9cken, mussen [Webhooks mat Mailgun]({mailgun_url}) ageriicht ginn.\n\nF\u00ebllt folgend Informatiounen aus:\n\n- URL: `{webhook_url}`\n- Method: POST\n- Content Type: application/x-www-form-urlencoded\n\nLiest [Dokumentatioun]({docs_url}) w\u00e9i een Automatiounen ariicht welch eingehend Donn\u00e9\u00eb trait\u00e9ieren."
+            "default": "Fir Evenementer un Home Assistant ze sch\u00e9cken, mussen [Webhooks mat Mailgun]({mailgun_url}) ageriicht ginn.\n\nF\u00ebllt folgend Informatiounen aus:\n\n- URL: `{webhook_url}`\n- Method: POST\n- Content Type: application/json\n\nLiest [Dokumentatioun]({docs_url}) w\u00e9i een Automatiounen ariicht welch eingehend Donn\u00e9\u00eb trait\u00e9ieren."
         },
         "step": {
             "user": {
diff --git a/homeassistant/components/mikrotik/translations/pl.json b/homeassistant/components/mikrotik/translations/pl.json
index 44ee1ad4403..20b0348570c 100644
--- a/homeassistant/components/mikrotik/translations/pl.json
+++ b/homeassistant/components/mikrotik/translations/pl.json
@@ -11,7 +11,7 @@
         "step": {
             "user": {
                 "data": {
-                    "host": "Host",
+                    "host": "Nazwa hosta lub adres IP",
                     "name": "Nazwa",
                     "password": "Has\u0142o",
                     "port": "Port",
diff --git a/homeassistant/components/minecraft_server/translations/pl.json b/homeassistant/components/minecraft_server/translations/pl.json
index c5e1abdf729..77d83f37174 100644
--- a/homeassistant/components/minecraft_server/translations/pl.json
+++ b/homeassistant/components/minecraft_server/translations/pl.json
@@ -11,7 +11,7 @@
         "step": {
             "user": {
                 "data": {
-                    "host": "Host",
+                    "host": "Nazwa hosta lub adres IP",
                     "name": "Nazwa"
                 },
                 "description": "Skonfiguruj instancj\u0119 serwera Minecraft, aby umo\u017cliwi\u0107 monitorowanie.",
diff --git a/homeassistant/components/monoprice/translations/pl.json b/homeassistant/components/monoprice/translations/pl.json
index d0a3d1751a7..300c19e92b7 100644
--- a/homeassistant/components/monoprice/translations/pl.json
+++ b/homeassistant/components/monoprice/translations/pl.json
@@ -21,5 +21,20 @@
                 "title": "Po\u0142\u0105cz z urz\u0105dzeniem"
             }
         }
+    },
+    "options": {
+        "step": {
+            "init": {
+                "data": {
+                    "source_1": "Nazwa \u017ar\u00f3d\u0142a #1",
+                    "source_2": "Nazwa \u017ar\u00f3d\u0142a #2",
+                    "source_3": "Nazwa \u017ar\u00f3d\u0142a #3",
+                    "source_4": "Nazwa \u017ar\u00f3d\u0142a #4",
+                    "source_5": "Nazwa \u017ar\u00f3d\u0142a #5",
+                    "source_6": "Nazwa \u017ar\u00f3d\u0142a #6"
+                },
+                "title": "Konfiguruj \u017ar\u00f3d\u0142a"
+            }
+        }
     }
 }
\ No newline at end of file
diff --git a/homeassistant/components/nut/translations/pl.json b/homeassistant/components/nut/translations/pl.json
index 94ffb76bb8d..32fab6f325b 100644
--- a/homeassistant/components/nut/translations/pl.json
+++ b/homeassistant/components/nut/translations/pl.json
@@ -23,7 +23,7 @@
             },
             "user": {
                 "data": {
-                    "host": "Host",
+                    "host": "Nazwa hosta lub adres IP",
                     "password": "Has\u0142o",
                     "port": "Port",
                     "username": "Nazwa u\u017cytkownika"
diff --git a/homeassistant/components/nws/translations/pl.json b/homeassistant/components/nws/translations/pl.json
new file mode 100644
index 00000000000..3da4d1f3ea8
--- /dev/null
+++ b/homeassistant/components/nws/translations/pl.json
@@ -0,0 +1,23 @@
+{
+    "config": {
+        "abort": {
+            "already_configured": "Urz\u0105dzenie jest ju\u017c skonfigurowane."
+        },
+        "error": {
+            "cannot_connect": "Nie mo\u017cna nawi\u0105za\u0107 po\u0142\u0105czenia, spr\u00f3buj ponownie.",
+            "unknown": "Niespodziewany b\u0142\u0105d."
+        },
+        "step": {
+            "user": {
+                "data": {
+                    "api_key": "Klucz API (e-mail)",
+                    "latitude": "Szeroko\u015b\u0107 geograficzna",
+                    "longitude": "D\u0142ugo\u015b\u0107 geograficzna",
+                    "station": "Kod stacji METAR"
+                },
+                "description": "Je\u015bli nie podasz kodu stacji METAR, do znalezienia najbli\u017cszej stacji zostan\u0105 u\u017cyte szeroko\u015b\u0107 i d\u0142ugo\u015b\u0107 geograficzna.",
+                "title": "Po\u0142\u0105cz z National Weather Service"
+            }
+        }
+    }
+}
\ No newline at end of file
diff --git a/homeassistant/components/owntracks/translations/pl.json b/homeassistant/components/owntracks/translations/pl.json
index f27d6a35c4d..38d5891edd8 100644
--- a/homeassistant/components/owntracks/translations/pl.json
+++ b/homeassistant/components/owntracks/translations/pl.json
@@ -4,7 +4,7 @@
             "one_instance_allowed": "Wymagana jest tylko jedna instancja."
         },
         "create_entry": {
-            "default": "\n\nNa Androidzie, otw\u00f3rz [aplikacj\u0119 OwnTracks]({android_url}), id\u017a do: ustawienia -> po\u0142aczenia. Zmie\u0144 nast\u0119puj\u0105ce ustawienia:\n - Tryb: Private HTTP\n - Host: {webhook_url}\n - Identyfikacja:\n   - Nazwa u\u017cytkownika: `<Your name>`\n   - ID urz\u0105dzenia: `<Your device name>`\n\nNa iOS, otw\u00f3rz [aplikacj\u0119 OwnTracks]({ios_url}), naci\u015bnij ikon\u0119 (i) w lewym g\u00f3rnym rogu -> ustawienia. Zmie\u0144 nast\u0119puj\u0105ce ustawienia:\n - Tryb: HTTP\n - URL: {webhook_url}\n - W\u0142\u0105cz uwierzytelnianie\n - ID u\u017cytkownika: `<Your name>`\n\n{secret}\n\nZapoznaj si\u0119 z [dokumentacj\u0105]({docs_url}), by pozna\u0107 szczeg\u00f3\u0142y."
+            "default": "\n\nNa Androidzie, otw\u00f3rz [aplikacj\u0119 OwnTracks]({android_url}), id\u017a do: ustawienia -> po\u0142\u0105czenia. Zmie\u0144 nast\u0119puj\u0105ce ustawienia:\n - Tryb: Private HTTP\n - Host: {webhook_url}\n - Identyfikacja:\n   - Nazwa u\u017cytkownika: `<Your name>`\n   - ID urz\u0105dzenia: `<Your device name>`\n\nNa iOS, otw\u00f3rz [aplikacj\u0119 OwnTracks]({ios_url}), naci\u015bnij ikon\u0119 (i) w lewym g\u00f3rnym rogu -> ustawienia. Zmie\u0144 nast\u0119puj\u0105ce ustawienia:\n - Tryb: HTTP\n - URL: {webhook_url}\n - W\u0142\u0105cz uwierzytelnianie\n - ID u\u017cytkownika: `<Your name>`\n\n{secret}\n\nZapoznaj si\u0119 z [dokumentacj\u0105]({docs_url}), by pozna\u0107 szczeg\u00f3\u0142y."
         },
         "step": {
             "user": {
diff --git a/homeassistant/components/panasonic_viera/translations/pl.json b/homeassistant/components/panasonic_viera/translations/pl.json
new file mode 100644
index 00000000000..7a880c33265
--- /dev/null
+++ b/homeassistant/components/panasonic_viera/translations/pl.json
@@ -0,0 +1,31 @@
+{
+    "config": {
+        "abort": {
+            "already_configured": "Ten telewizor Panasonic Viera jest ju\u017c skonfigurowany.",
+            "not_connected": "Zdalne po\u0142\u0105czenie z telewizorem Panasonic Viera zosta\u0142o utracone. Sprawd\u017a logi, aby uzyska\u0107 wi\u0119cej informacji.",
+            "unknown": "Nieznany b\u0142\u0105d, sprawd\u017a logi aby uzyska\u0107 wi\u0119cej szczeg\u00f3\u0142\u00f3w"
+        },
+        "error": {
+            "invalid_pin_code": "Podany kod PIN jest nieprawid\u0142owy",
+            "not_connected": "Nie uda\u0142o si\u0119 nawi\u0105za\u0107 zdalnego po\u0142\u0105czenia z telewizorem Panasonic Viera."
+        },
+        "step": {
+            "pairing": {
+                "data": {
+                    "pin": "PIN"
+                },
+                "description": "Wprowad\u017a kod PIN wy\u015bwietlony na ekranie telewizora",
+                "title": "Parowanie"
+            },
+            "user": {
+                "data": {
+                    "host": "Adres IP",
+                    "name": "Nazwa"
+                },
+                "description": "Wprowad\u017a adres IP telewizora Panasonic Viera",
+                "title": "Skonfiguruj telewizor"
+            }
+        }
+    },
+    "title": "Panasonic Viera"
+}
\ No newline at end of file
diff --git a/homeassistant/components/powerwall/translations/ca.json b/homeassistant/components/powerwall/translations/ca.json
index f2a598770a5..2416a2bf7f2 100644
--- a/homeassistant/components/powerwall/translations/ca.json
+++ b/homeassistant/components/powerwall/translations/ca.json
@@ -5,7 +5,8 @@
         },
         "error": {
             "cannot_connect": "No s'ha pogut connectar, torna-ho a provar",
-            "unknown": "Error inesperat"
+            "unknown": "Error inesperat",
+            "wrong_version": "El teu Powerwall utilitza una versi\u00f3 de programari no compatible. L'hauries d'actualitzar o informar d\u2019aquest problema perqu\u00e8 sigui solucionat."
         },
         "step": {
             "user": {
diff --git a/homeassistant/components/powerwall/translations/es.json b/homeassistant/components/powerwall/translations/es.json
index 0489feb2709..2f8ffcf787f 100644
--- a/homeassistant/components/powerwall/translations/es.json
+++ b/homeassistant/components/powerwall/translations/es.json
@@ -5,7 +5,8 @@
         },
         "error": {
             "cannot_connect": "No se pudo conectar, por favor int\u00e9ntelo de nuevo",
-            "unknown": "Error inesperado"
+            "unknown": "Error inesperado",
+            "wrong_version": "tu powerwall utiliza una versi\u00f3n de software que no es compatible. Considera actualizar o informar de este problema para que pueda resolverse."
         },
         "step": {
             "user": {
diff --git a/homeassistant/components/powerwall/translations/lb.json b/homeassistant/components/powerwall/translations/lb.json
index 9f1e0670d64..1722daf7479 100644
--- a/homeassistant/components/powerwall/translations/lb.json
+++ b/homeassistant/components/powerwall/translations/lb.json
@@ -5,7 +5,8 @@
         },
         "error": {
             "cannot_connect": "Feeler beim verbannen, prob\u00e9ier w.e.g. nach emol.",
-            "unknown": "Onerwaarte Feeler"
+            "unknown": "Onerwaarte Feeler",
+            "wrong_version": "Deng Powerwall benotzt eng Software Versioun d\u00e9i net \u00ebnnerst\u00ebtzt ass. Betruecht een Upgrade ze maachen oder d\u00ebst ze mellen, sou dass et ka gel\u00e9ist ginn."
         },
         "step": {
             "user": {
diff --git a/homeassistant/components/powerwall/translations/no.json b/homeassistant/components/powerwall/translations/no.json
index 0c105f26168..a688a9ad8c4 100644
--- a/homeassistant/components/powerwall/translations/no.json
+++ b/homeassistant/components/powerwall/translations/no.json
@@ -5,7 +5,8 @@
         },
         "error": {
             "cannot_connect": "Klarte ikke \u00e5 koble til, vennligst pr\u00f8v igjen",
-            "unknown": "Uventet feil"
+            "unknown": "Uventet feil",
+            "wrong_version": "Powerwall bruker en programvareversjon som ikke st\u00f8ttes. Vennligst vurder \u00e5 oppgradere eller rapportere dette problemet, s\u00e5 det kan l\u00f8ses."
         },
         "step": {
             "user": {
diff --git a/homeassistant/components/powerwall/translations/pl.json b/homeassistant/components/powerwall/translations/pl.json
index aa4ea4da94f..cfb277179ed 100644
--- a/homeassistant/components/powerwall/translations/pl.json
+++ b/homeassistant/components/powerwall/translations/pl.json
@@ -5,7 +5,8 @@
         },
         "error": {
             "cannot_connect": "Nie mo\u017cna nawi\u0105za\u0107 po\u0142\u0105czenia, spr\u00f3buj ponownie.",
-            "unknown": "Niespodziewany b\u0142\u0105d."
+            "unknown": "Niespodziewany b\u0142\u0105d.",
+            "wrong_version": "Powerwall u\u017cywa wersji oprogramowania, kt\u00f3ra nie jest obs\u0142ugiwana. Rozwa\u017c uaktualnienie lub zg\u0142oszenie tego problemu, aby mo\u017cna go by\u0142o rozwi\u0105za\u0107."
         },
         "step": {
             "user": {
diff --git a/homeassistant/components/powerwall/translations/ru.json b/homeassistant/components/powerwall/translations/ru.json
index 4f5f75dc644..cf3b1cd4ba0 100644
--- a/homeassistant/components/powerwall/translations/ru.json
+++ b/homeassistant/components/powerwall/translations/ru.json
@@ -5,7 +5,8 @@
         },
         "error": {
             "cannot_connect": "\u041d\u0435 \u0443\u0434\u0430\u043b\u043e\u0441\u044c \u043f\u043e\u0434\u043a\u043b\u044e\u0447\u0438\u0442\u044c\u0441\u044f, \u043f\u043e\u043f\u0440\u043e\u0431\u0443\u0439\u0442\u0435 \u0435\u0449\u0435 \u0440\u0430\u0437.",
-            "unknown": "\u041d\u0435\u043f\u0440\u0435\u0434\u0432\u0438\u0434\u0435\u043d\u043d\u0430\u044f \u043e\u0448\u0438\u0431\u043a\u0430."
+            "unknown": "\u041d\u0435\u043f\u0440\u0435\u0434\u0432\u0438\u0434\u0435\u043d\u043d\u0430\u044f \u043e\u0448\u0438\u0431\u043a\u0430.",
+            "wrong_version": "\u0412\u0430\u0448 powerwall \u0438\u0441\u043f\u043e\u043b\u044c\u0437\u0443\u0435\u0442 \u0432\u0435\u0440\u0441\u0438\u044e \u043f\u0440\u043e\u0433\u0440\u0430\u043c\u043c\u043d\u043e\u0433\u043e \u043e\u0431\u0435\u0441\u043f\u0435\u0447\u0435\u043d\u0438\u044f, \u043a\u043e\u0442\u043e\u0440\u0430\u044f \u043d\u0435 \u043f\u043e\u0434\u0434\u0435\u0440\u0436\u0438\u0432\u0430\u0435\u0442\u0441\u044f. \u041f\u043e\u0436\u0430\u043b\u0443\u0439\u0441\u0442\u0430, \u0440\u0430\u0441\u0441\u043c\u043e\u0442\u0440\u0438\u0442\u0435 \u0432\u043e\u0437\u043c\u043e\u0436\u043d\u043e\u0441\u0442\u044c \u043e\u0431\u043d\u043e\u0432\u043b\u0435\u043d\u0438\u044f \u0438\u043b\u0438 \u0441\u043e\u043e\u0431\u0449\u0438\u0442\u0435 \u043e\u0431 \u044d\u0442\u043e\u0439 \u043f\u0440\u043e\u0431\u043b\u0435\u043c\u0435, \u0447\u0442\u043e\u0431\u044b \u0435\u0435 \u043c\u043e\u0436\u043d\u043e \u0431\u044b\u043b\u043e \u0440\u0435\u0448\u0438\u0442\u044c."
         },
         "step": {
             "user": {
diff --git a/homeassistant/components/powerwall/translations/zh-Hant.json b/homeassistant/components/powerwall/translations/zh-Hant.json
index 91bb4b61801..8883e669a85 100644
--- a/homeassistant/components/powerwall/translations/zh-Hant.json
+++ b/homeassistant/components/powerwall/translations/zh-Hant.json
@@ -5,7 +5,8 @@
         },
         "error": {
             "cannot_connect": "\u9023\u7dda\u5931\u6557\uff0c\u8acb\u518d\u8a66\u4e00\u6b21",
-            "unknown": "\u672a\u9810\u671f\u932f\u8aa4"
+            "unknown": "\u672a\u9810\u671f\u932f\u8aa4",
+            "wrong_version": "\u4e0d\u652f\u63f4\u60a8\u6240\u4f7f\u7528\u7684 Powerwall \u7248\u672c\u3002\u8acb\u8003\u616e\u9032\u884c\u5347\u7d1a\u6216\u56de\u5831\u6b64\u554f\u984c\u3001\u4ee5\u671f\u554f\u984c\u53ef\u4ee5\u7372\u5f97\u89e3\u6c7a\u3002"
         },
         "step": {
             "user": {
diff --git a/homeassistant/components/roomba/translations/lb.json b/homeassistant/components/roomba/translations/lb.json
index 70671503e51..2771b3f5b2a 100644
--- a/homeassistant/components/roomba/translations/lb.json
+++ b/homeassistant/components/roomba/translations/lb.json
@@ -14,6 +14,7 @@
                     "host": "Host Numm oder IP Adresse",
                     "password": "Passwuert"
                 },
+                "description": "De Prozess fir BLID an Passwuert opzeruffen ass fir de Moment manuell. Folleg w.e.g. de Schr\u00ebtt d\u00e9i an der Dokumentatioun op https://www.home-assistant.io/integrations/roomba/#retrieving-your-credentials beschriwwe sinn.",
                 "title": "Mam Apparat verbannen"
             }
         }
diff --git a/homeassistant/components/roomba/translations/pl.json b/homeassistant/components/roomba/translations/pl.json
new file mode 100644
index 00000000000..3772d6a08c5
--- /dev/null
+++ b/homeassistant/components/roomba/translations/pl.json
@@ -0,0 +1,32 @@
+{
+    "config": {
+        "error": {
+            "cannot_connect": "Nie mo\u017cna nawi\u0105za\u0107 po\u0142\u0105czenia, spr\u00f3buj ponownie.",
+            "unknown": "Niespodziewany b\u0142\u0105d."
+        },
+        "step": {
+            "user": {
+                "data": {
+                    "blid": "BLID",
+                    "certificate": "Certyfikat",
+                    "continuous": "Ci\u0105g\u0142y",
+                    "delay": "Op\u00f3\u017anienie",
+                    "host": "Nazwa hosta lub adres IP",
+                    "password": "Has\u0142o"
+                },
+                "description": "Obecnie pobieranie BLID i has\u0142a jest procesem r\u0119cznym. Prosz\u0119 post\u0119powa\u0107 zgodnie z instrukcjami zawartymi w dokumentacji pod adresem: https://www.home-assistant.io/integrations/roomba/#retrieving-your-credentials.",
+                "title": "Po\u0142\u0105cz z urz\u0105dzeniem"
+            }
+        }
+    },
+    "options": {
+        "step": {
+            "init": {
+                "data": {
+                    "continuous": "Ci\u0105g\u0142y",
+                    "delay": "Op\u00f3\u017anienie"
+                }
+            }
+        }
+    }
+}
\ No newline at end of file
diff --git a/homeassistant/components/smartthings/translations/lb.json b/homeassistant/components/smartthings/translations/lb.json
index 623e00870b8..af1e70eedd8 100644
--- a/homeassistant/components/smartthings/translations/lb.json
+++ b/homeassistant/components/smartthings/translations/lb.json
@@ -1,6 +1,7 @@
 {
     "config": {
         "abort": {
+            "invalid_webhook_url": "Home Assistant ass net richteg konfigur\u00e9iert fir Updates vun SmartThings z'empf\u00e4nken.\nWebhook URL ass ong\u00eblteg:\n>{webhook_url}\n\u00c4nner deng Konfiguratioun sou w\u00e9i an den [Instruktioune]({component_url}) start Home Assistant fr\u00ebsch an prob\u00e9ier nach eemol.",
             "no_available_locations": "Keng disponibel Smartthings Standuerte fir am Home Assistant anzeriichten."
         },
         "error": {
@@ -8,7 +9,7 @@
             "token_forbidden": "De Jeton huet net d\u00e9i n\u00e9ideg OAuth M\u00e9iglechkeeten.",
             "token_invalid_format": "De Jeton muss am UID/GUID Format sinn",
             "token_unauthorized": "De Jeton ass ong\u00eblteg oder net m\u00e9i autoris\u00e9iert.",
-            "webhook_error": "SmartThings konnt den an der 'base_url' defin\u00e9ierten Endpoint net valid\u00e9ieren. Iwwerpr\u00e9ift d'Viraussetzunge vun d\u00ebser Komponente"
+            "webhook_error": "SmartThings konnt d'Webhook URL valid\u00e9ieren. Stell s\u00e9cher dass d'URL vum Internet aus ereechbar ass a prob\u00e9ier nach eemol."
         },
         "step": {
             "authorize": {
@@ -25,11 +26,12 @@
                 "data": {
                     "location_id": "Standuert"
                 },
+                "description": "Wiel SmartThings Standuert aus fir en am Home Assistant dob\u00e4i ze setzen. Dann geht eng nei F\u00ebnster op mat engem Login an fir d'Installatioun vun der Integratioun  am Home Assistanr z'erlaaben.",
                 "title": "Standuert auswielen"
             },
             "user": {
-                "description": "Gitt w.e.g. ee [Pers\u00e9inlechen Acc\u00e8s Jeton]({token_url}) vu SmartThings an dee via [d'Instruktiounen] ({component_url}) erstallt gouf.",
-                "title": "Pers\u00e9inlechen Acc\u00e8ss Jeton uginn"
+                "description": "SmartThings g\u00ebtt ageriicht fir Push Aktualis\u00e9ierungen un Home Assistant ze sch\u00e9cken un d'Adresse:\n>{webhook_url}\n\nFalls d\u00ebs net korrekt ass, \u00e4nner deng Konfiguratioun, start Home Assistant fr\u00ebsch a prob\u00e9ier nach emol.",
+                "title": "Callback URL confirm\u00e9ieren"
             }
         }
     }
diff --git a/homeassistant/components/smartthings/translations/pl.json b/homeassistant/components/smartthings/translations/pl.json
index 0b6f347873c..517127a5091 100644
--- a/homeassistant/components/smartthings/translations/pl.json
+++ b/homeassistant/components/smartthings/translations/pl.json
@@ -1,5 +1,9 @@
 {
     "config": {
+        "abort": {
+            "invalid_webhook_url": "Home Assistant nie jest poprawnie skonfigurowany do otrzymywania danych od SmartThings. Adres URL  webhook jest nieprawid\u0142owy: \n > {webhook_url} \n\n Zaktualizuj konfiguracj\u0119 zgodnie z [instrukcj\u0105]({component_url}), uruchom ponownie Home Assistant i spr\u00f3buj ponownie.",
+            "no_available_locations": "Nie ma dost\u0119pnych lokalizacji SmartThings do skonfigurowania w Home Assistant."
+        },
         "error": {
             "app_setup_error": "Nie mo\u017cna skonfigurowa\u0107 SmartApp. Spr\u00f3buj ponownie.",
             "token_forbidden": "Token nie ma wymaganych zakres\u00f3w OAuth.",
@@ -8,6 +12,21 @@
             "webhook_error": "SmartThings nie mo\u017ce sprawdzi\u0107 poprawno\u015bci punktu ko\u0144cowego skonfigurowanego w `base_url`. Sprawd\u017a wymagania dotycz\u0105ce komponentu."
         },
         "step": {
+            "authorize": {
+                "title": "Autoryzuj Home Assistant'a"
+            },
+            "pat": {
+                "data": {
+                    "access_token": "Token dost\u0119pu"
+                },
+                "title": "Wprowad\u017a osobisty token dost\u0119pu"
+            },
+            "select_location": {
+                "data": {
+                    "location_id": "Lokalizacja"
+                },
+                "title": "Wybierz lokalizacj\u0119"
+            },
             "user": {
                 "description": "Wprowad\u017a [token dost\u0119pu osobistego]({token_url}) SmartThings, kt\u00f3ry zosta\u0142 utworzony zgodnie z [instrukcj\u0105]({component_url}).",
                 "title": "Wprowad\u017a osobisty token dost\u0119pu"
diff --git a/homeassistant/components/soma/translations/pl.json b/homeassistant/components/soma/translations/pl.json
index 8d83b05e736..dc71b001bde 100644
--- a/homeassistant/components/soma/translations/pl.json
+++ b/homeassistant/components/soma/translations/pl.json
@@ -13,7 +13,7 @@
         "step": {
             "user": {
                 "data": {
-                    "host": "Host",
+                    "host": "Nazwa hosta lub adres IP",
                     "port": "Port"
                 },
                 "description": "Wprowad\u017a ustawienia po\u0142\u0105czenia SOMA Connect.",
diff --git a/homeassistant/components/sun/translations/no.json b/homeassistant/components/sun/translations/no.json
index de709024d22..8597fea2ce5 100644
--- a/homeassistant/components/sun/translations/no.json
+++ b/homeassistant/components/sun/translations/no.json
@@ -1,3 +1,9 @@
 {
+    "state": {
+        "_": {
+            "above_horizon": "Over horisonten",
+            "below_horizon": "Under horisonten"
+        }
+    },
     "title": "Sol"
 }
\ No newline at end of file
diff --git a/homeassistant/components/synology_dsm/translations/es.json b/homeassistant/components/synology_dsm/translations/es.json
index c2f00b0874c..122f8bef51d 100644
--- a/homeassistant/components/synology_dsm/translations/es.json
+++ b/homeassistant/components/synology_dsm/translations/es.json
@@ -4,6 +4,7 @@
             "already_configured": "El host ya est\u00e1 configurado."
         },
         "error": {
+            "connection": "Error de conexi\u00f3n: comprueba tu host, puerto y ssl",
             "login": "Error de inicio de sesi\u00f3n: comprueba tu nombre de usuario y contrase\u00f1a",
             "missing_data": "Faltan datos: por favor, vuelva a intentarlo m\u00e1s tarde o pruebe con otra configuraci\u00f3n",
             "otp_failed": "La autenticaci\u00f3n de dos pasos fall\u00f3, vuelva a intentar con un nuevo c\u00f3digo de acceso",
diff --git a/homeassistant/components/synology_dsm/translations/it.json b/homeassistant/components/synology_dsm/translations/it.json
index 0de4e3bbccd..e7ce33ec43c 100644
--- a/homeassistant/components/synology_dsm/translations/it.json
+++ b/homeassistant/components/synology_dsm/translations/it.json
@@ -8,7 +8,7 @@
             "missing_data": "Dati mancanti: si prega di riprovare pi\u00f9 tardi o un'altra configurazione",
             "otp_failed": "Autenticazione in due fasi fallita, riprovare con un nuovo codice di accesso"
         },
-        "flow_title": "Synology DSM {nome} ({host})",
+        "flow_title": "Synology DSM {name} ({host})",
         "step": {
             "2sa": {
                 "data": {
@@ -24,7 +24,7 @@
                     "ssl": "Utilizzare SSL/TLS per connettersi al NAS",
                     "username": "Nome utente"
                 },
-                "description": "Vuoi impostare {nome} ({host})?",
+                "description": "Vuoi impostare {name} ({host})?",
                 "title": "Synology DSM"
             },
             "user": {
diff --git a/homeassistant/components/synology_dsm/translations/lb.json b/homeassistant/components/synology_dsm/translations/lb.json
index 1db4f2a193c..5453b078a3e 100644
--- a/homeassistant/components/synology_dsm/translations/lb.json
+++ b/homeassistant/components/synology_dsm/translations/lb.json
@@ -4,6 +4,7 @@
             "already_configured": "Apparat ass scho konfigur\u00e9iert"
         },
         "error": {
+            "connection": "Feeler beim verbannen Iwwerpr\u00e9if w.e.g. den Numm, Passwuert & SSL",
             "login": "Feeler beim Login: iwwerpr\u00e9if de Benotzernumm & Passwuert",
             "missing_data": "Donn\u00e9\u00ebe feelen, prob\u00e9ier sp\u00e9ider oder mat enger aner Konfiguratioun",
             "otp_failed": "Feeler mam 2-Faktor-Authentifikatiouns, prob\u00e9ier mat engem neie Code",
diff --git a/homeassistant/components/synology_dsm/translations/no.json b/homeassistant/components/synology_dsm/translations/no.json
index a10b28b5386..d9e24638f72 100644
--- a/homeassistant/components/synology_dsm/translations/no.json
+++ b/homeassistant/components/synology_dsm/translations/no.json
@@ -4,12 +4,13 @@
             "already_configured": "Verten er allerede konfigurert"
         },
         "error": {
+            "connection": "Tilkoblingsfeil: sjekk verten, porten og ssl",
             "login": "P\u00e5loggingsfeil: Vennligst sjekk brukernavnet ditt og passordet ditt",
             "missing_data": "Manglende data: Pr\u00f8v p\u00e5 nytt senere eller en annen konfigurasjon",
             "otp_failed": "To-trinns autentisering mislyktes. Pr\u00f8v p\u00e5 nytt med en ny passkode",
             "unknown": "Ukjent feil: sjekk loggene for \u00e5 f\u00e5 flere detaljer"
         },
-        "flow_title": "Synology DSM {name} ( {host} )",
+        "flow_title": "Synology DSM {name} ({host})",
         "step": {
             "2sa": {
                 "data": {
diff --git a/homeassistant/components/synology_dsm/translations/pl.json b/homeassistant/components/synology_dsm/translations/pl.json
index d7045b9d1f6..d7714de27eb 100644
--- a/homeassistant/components/synology_dsm/translations/pl.json
+++ b/homeassistant/components/synology_dsm/translations/pl.json
@@ -4,10 +4,20 @@
             "already_configured": "Host jest ju\u017c skonfigurowany."
         },
         "error": {
-            "login": "B\u0142\u0105d logowania: sprawd\u017a nazw\u0119 u\u017cytkownika i has\u0142o"
+            "connection": "B\u0142\u0105d po\u0142\u0105czenia: sprawd\u017a host, port i SSL",
+            "login": "B\u0142\u0105d logowania: sprawd\u017a nazw\u0119 u\u017cytkownika i has\u0142o",
+            "missing_data": "Brakuj\u0105ce dane: spr\u00f3buj ponownie p\u00f3\u017aniej lub skorzystaj z innej konfiguracji",
+            "otp_failed": "Uwierzytelnianie dwuetapowe nie powiod\u0142o si\u0119, spr\u00f3buj ponownie z nowym kodem dost\u0119pu",
+            "unknown": "Nieznany b\u0142\u0105d, sprawd\u017a logi aby uzyska\u0107 wi\u0119cej szczeg\u00f3\u0142\u00f3w"
         },
         "flow_title": "Synology DSM {name} ({host})",
         "step": {
+            "2sa": {
+                "data": {
+                    "otp_code": "Kod"
+                },
+                "title": "Synology DSM: Uwierzytelnianie dwusk\u0142adnikowe"
+            },
             "link": {
                 "data": {
                     "api_version": "Wersja DSM",
@@ -22,7 +32,7 @@
             "user": {
                 "data": {
                     "api_version": "Wersja DSM",
-                    "host": "Host",
+                    "host": "Nazwa hosta lub adres IP",
                     "password": "Has\u0142o",
                     "port": "Port (opcjonalnie)",
                     "ssl": "U\u017cyj SSL/TLS, aby po\u0142\u0105czy\u0107 si\u0119 z serwerem NAS",
diff --git a/homeassistant/components/tado/translations/lb.json b/homeassistant/components/tado/translations/lb.json
index e84720a2de1..91a81f03177 100644
--- a/homeassistant/components/tado/translations/lb.json
+++ b/homeassistant/components/tado/translations/lb.json
@@ -25,6 +25,7 @@
                 "data": {
                     "fallback": "Fallback Modus aktiv\u00e9ieren"
                 },
+                "description": "Fallback Modus wiesselt op Smarte Z\u00e4itplang beim n\u00e4chsten ausf\u00e9ieren nodeems eng Zon ausgewielt gouf.",
                 "title": "Tado Optiounen \u00e4nneren"
             }
         }
diff --git a/homeassistant/components/tado/translations/pl.json b/homeassistant/components/tado/translations/pl.json
new file mode 100644
index 00000000000..65a23d58359
--- /dev/null
+++ b/homeassistant/components/tado/translations/pl.json
@@ -0,0 +1,29 @@
+{
+    "config": {
+        "abort": {
+            "already_configured": "Urz\u0105dzenie jest ju\u017c skonfigurowane."
+        },
+        "error": {
+            "cannot_connect": "Nie mo\u017cna nawi\u0105za\u0107 po\u0142\u0105czenia, spr\u00f3buj ponownie.",
+            "invalid_auth": "Niepoprawne uwierzytelnienie",
+            "no_homes": "Brak dom\u00f3w powi\u0105zanych z tym kontem Tado.",
+            "unknown": "Niespodziewany b\u0142\u0105d."
+        },
+        "step": {
+            "user": {
+                "data": {
+                    "password": "Has\u0142o",
+                    "username": "Nazwa u\u017cytkownika"
+                },
+                "title": "Po\u0142\u0105cz z kontem Tado"
+            }
+        }
+    },
+    "options": {
+        "step": {
+            "init": {
+                "title": "Dostosuj opcje Tado"
+            }
+        }
+    }
+}
\ No newline at end of file
diff --git a/homeassistant/components/tellduslive/translations/pl.json b/homeassistant/components/tellduslive/translations/pl.json
index 3ee83236d7e..c07f9de7b3d 100644
--- a/homeassistant/components/tellduslive/translations/pl.json
+++ b/homeassistant/components/tellduslive/translations/pl.json
@@ -16,7 +16,7 @@
             },
             "user": {
                 "data": {
-                    "host": "Host"
+                    "host": "Nazwa hosta lub adres IP"
                 },
                 "description": "Puste",
                 "title": "Wybierz punkt ko\u0144cowy."
diff --git a/homeassistant/components/totalconnect/translations/pl.json b/homeassistant/components/totalconnect/translations/pl.json
new file mode 100644
index 00000000000..58a0f7018da
--- /dev/null
+++ b/homeassistant/components/totalconnect/translations/pl.json
@@ -0,0 +1,19 @@
+{
+    "config": {
+        "abort": {
+            "already_configured": "Konto jest ju\u017c skonfigurowane."
+        },
+        "error": {
+            "login": "B\u0142\u0105d logowania: sprawd\u017a swoj\u0105 nazw\u0119 u\u017cytkownika i has\u0142o"
+        },
+        "step": {
+            "user": {
+                "data": {
+                    "password": "Has\u0142o",
+                    "username": "Nazwa u\u017cytkownika"
+                },
+                "title": "Total Connect"
+            }
+        }
+    }
+}
\ No newline at end of file
diff --git a/homeassistant/components/tradfri/translations/pl.json b/homeassistant/components/tradfri/translations/pl.json
index 379a554e0c3..028956ec6b3 100644
--- a/homeassistant/components/tradfri/translations/pl.json
+++ b/homeassistant/components/tradfri/translations/pl.json
@@ -12,7 +12,7 @@
         "step": {
             "auth": {
                 "data": {
-                    "host": "Host",
+                    "host": "Nazwa hosta lub adres IP",
                     "security_code": "Kod bezpiecze\u0144stwa"
                 },
                 "description": "Mo\u017cesz znale\u017a\u0107 kod bezpiecze\u0144stwa z ty\u0142u bramki.",
diff --git a/homeassistant/components/transmission/translations/pl.json b/homeassistant/components/transmission/translations/pl.json
index 20b4f8e55a9..52efb32b551 100644
--- a/homeassistant/components/transmission/translations/pl.json
+++ b/homeassistant/components/transmission/translations/pl.json
@@ -11,7 +11,7 @@
         "step": {
             "user": {
                 "data": {
-                    "host": "Host",
+                    "host": "Nazwa hosta lub adres IP",
                     "name": "Nazwa",
                     "password": "Has\u0142o",
                     "port": "Port",
diff --git a/homeassistant/components/unifi/translations/pl.json b/homeassistant/components/unifi/translations/pl.json
index bc7466a32db..db35a0b3c6a 100644
--- a/homeassistant/components/unifi/translations/pl.json
+++ b/homeassistant/components/unifi/translations/pl.json
@@ -12,7 +12,7 @@
         "step": {
             "user": {
                 "data": {
-                    "host": "Host",
+                    "host": "Nazwa hosta lub adres IP",
                     "password": "Has\u0142o",
                     "port": "Port",
                     "site": "Identyfikator witryny",
@@ -28,7 +28,8 @@
             "client_control": {
                 "data": {
                     "block_client": "Klienci z kontrol\u0105 dost\u0119pu do sieci",
-                    "new_client": "Dodaj nowego klienta do kontroli dost\u0119pu do sieci"
+                    "new_client": "Dodaj nowego klienta do kontroli dost\u0119pu do sieci",
+                    "poe_clients": "Zezwalaj na kontrol\u0119 POE klient\u00f3w"
                 },
                 "description": "Konfigurowanie kontroli klienta\n\nUtw\u00f3rz prze\u0142\u0105czniki dla numer\u00f3w seryjnych, dla kt\u00f3rych chcesz kontrolowa\u0107 dost\u0119p do sieci.",
                 "title": "UniFi opcje 2/3"
diff --git a/homeassistant/components/upnp/translations/lb.json b/homeassistant/components/upnp/translations/lb.json
index 3e9ef97585b..9fb009f0935 100644
--- a/homeassistant/components/upnp/translations/lb.json
+++ b/homeassistant/components/upnp/translations/lb.json
@@ -26,7 +26,7 @@
                     "enable_sensors": "Trafic Sensoren dob\u00e4isetzen",
                     "igd": "UPnP/IGD"
                 },
-                "title": "Konfiguratiouns Optiounen fir UPnP/IGD"
+                "title": "Konfiguratiouns Optiounen"
             }
         }
     }
diff --git a/homeassistant/components/vera/translations/pl.json b/homeassistant/components/vera/translations/pl.json
new file mode 100644
index 00000000000..baafc324bea
--- /dev/null
+++ b/homeassistant/components/vera/translations/pl.json
@@ -0,0 +1,31 @@
+{
+    "config": {
+        "abort": {
+            "already_configured": "Kontroler jest ju\u017c skonfigurowany.",
+            "cannot_connect": "Nie mo\u017cna po\u0142\u0105czy\u0107 z kontrolerem za pomoc\u0105 adresu {base_url}"
+        },
+        "step": {
+            "user": {
+                "data": {
+                    "exclude": "Identyfikatory urz\u0105dze\u0144 Vera do wykluczenia z Home Assistant.",
+                    "lights": "Identyfikatory prze\u0142\u0105cznik\u00f3w Vera, kt\u00f3re maj\u0105 by\u0107 traktowane jako \u015bwiat\u0142a w Home Assistant.",
+                    "vera_controller_url": "Adres URL kontrolera"
+                },
+                "description": "Podaj adres URL kontrolera Vera. Powinien on wygl\u0105da\u0107 tak: http://192.168.1.161:3480.",
+                "title": "Skonfiguruj kontroler Vera"
+            }
+        }
+    },
+    "options": {
+        "step": {
+            "init": {
+                "data": {
+                    "exclude": "Identyfikatory urz\u0105dze\u0144 Vera do wykluczenia z Home Assistant.",
+                    "lights": "Identyfikatory prze\u0142\u0105cznik\u00f3w Vera, kt\u00f3re maj\u0105 by\u0107 traktowane jako \u015bwiat\u0142a w Home Assistant."
+                },
+                "description": "Szczeg\u00f3\u0142owe informacje na temat parametr\u00f3w opcjonalnych mo\u017cna znale\u017a\u0107 w dokumentacji Vera: https://www.home-assistant.io/integrations/vera/. Uwaga: Wszelkie zmiany tutaj b\u0119d\u0105 wymaga\u0142y ponownego uruchomienia serwera Home Assistant. Aby wyczy\u015bci\u0107 warto\u015bci, wpisz spacj\u0119.",
+                "title": "Opcje kontrolera Vera"
+            }
+        }
+    }
+}
\ No newline at end of file
diff --git a/homeassistant/components/vizio/translations/lb.json b/homeassistant/components/vizio/translations/lb.json
index 3cd7c1526ee..48267a23126 100644
--- a/homeassistant/components/vizio/translations/lb.json
+++ b/homeassistant/components/vizio/translations/lb.json
@@ -7,8 +7,8 @@
         "error": {
             "cant_connect": "Konnt sech net mam Apparat verbannen. [Iwwerpr\u00e9ift Dokumentatioun] (https://www.home-assistant.io/integrations/vizio/) a stellt s\u00e9cher dass:\n- Den Apparat ass un\n- Den Apparat ass mam Netzwierk verbonnen\n- D'Optiounen d\u00e9i dir aginn hutt si korrekt\nier dir d'Verbindung nees prob\u00e9iert",
             "complete_pairing failed": "Feeler beim ofschl\u00e9isse vun der Kopplung. Iwwerpr\u00e9if dass de PIN korrekt an da de Fernsee nach \u00ebmmer ugeschalt a mam Netzwierk verbonnen ass ier de n\u00e4chste Versuch gestart g\u00ebtt.",
-            "host_exists": "Vizio Apparat mat d\u00ebsem Host ass scho konfigur\u00e9iert.",
-            "name_exists": "Vizio Apparat mat d\u00ebsen Numm ass scho konfigur\u00e9iert."
+            "host_exists": "VIZIO Apparat mat d\u00ebsem Host ass scho konfigur\u00e9iert.",
+            "name_exists": "VIZIO Apparat mat d\u00ebsen Numm ass scho konfigur\u00e9iert."
         },
         "step": {
             "pair_tv": {
@@ -19,11 +19,11 @@
                 "title": "Kopplungs Prozess ofschl\u00e9issen"
             },
             "pairing_complete": {
-                "description": "D\u00e4in Visio SmartCast Apparat ass elo mam Home Assistant verbonnen.",
+                "description": "D\u00e4in VIZIO SmartCast Apparat ass elo mam Home Assistant verbonnen.",
                 "title": "Kopplung ofgeschloss"
             },
             "pairing_complete_import": {
-                "description": "D\u00e4in Visio SmartCast Apparat ass elo mam Home Assistant verbonnen.\n\nD\u00e4in Acc\u00e8s Jeton ass '**{access_token}**'.",
+                "description": "D\u00e4in VIZIO SmartCast Apparat ass elo mam Home Assistant verbonnen.\n\nD\u00e4in Acc\u00e8s Jeton ass '**{access_token}**'.",
                 "title": "Kopplung ofgeschloss"
             },
             "user": {
@@ -34,7 +34,7 @@
                     "name": "Numm"
                 },
                 "description": "Een Access Jeton g\u00ebtt nn\u00ebmme fir Fernseher gebraucht. Wann Dir e Fernseh konfigur\u00e9iert a keen Access Jeton hutt, da loosst et eidel fir duerch dee Pairing Prozess ze goen.",
-                "title": "Vizo Smartcast Apparat ariichten"
+                "title": "VIZIO Smartcast Apparat ariichten"
             }
         }
     },
@@ -47,7 +47,7 @@
                     "volume_step": "Lautst\u00e4erkt Schr\u00ebtt Gr\u00e9isst"
                 },
                 "description": "Falls du ee Smart TV hues kanns du d'Quelle L\u00ebscht optionell filteren andeems du d'Apps auswiels d\u00e9i soll mat abegraff oder ausgeschloss ginn.",
-                "title": "Vizo Smartcast Optiounen aktualis\u00e9ieren"
+                "title": "VIZIO Smartcast Optiounen aktualis\u00e9ieren"
             }
         }
     }
diff --git a/homeassistant/components/vizio/translations/pl.json b/homeassistant/components/vizio/translations/pl.json
index 392ae0f47f3..2d586bc3e36 100644
--- a/homeassistant/components/vizio/translations/pl.json
+++ b/homeassistant/components/vizio/translations/pl.json
@@ -6,6 +6,7 @@
         },
         "error": {
             "cant_connect": "Nie mo\u017cna po\u0142\u0105czy\u0107 si\u0119 z urz\u0105dzeniem. [Przejrzyj dokumentacj\u0119] (https://www.home-assistant.io/integrations/vizio/) i ponownie sprawd\u017a, czy: \n - urz\u0105dzenie jest w\u0142\u0105czone,\n - urz\u0105dzenie jest pod\u0142\u0105czone do sieci,\n - wprowadzone warto\u015bci s\u0105 prawid\u0142owe,\n przed pr\u00f3b\u0105 ponownego przes\u0142ania.",
+            "complete_pairing failed": "Nie mo\u017cna uko\u0144czy\u0107 parowania. Upewnij si\u0119, \u017ce podany kod PIN jest prawid\u0142owy, a telewizor jest zasilany i pod\u0142\u0105czony do sieci przed ponownym przes\u0142aniem.",
             "host_exists": "Urz\u0105dzenie Vizio z okre\u015blonym hostem jest ju\u017c skonfigurowane.",
             "name_exists": "Urz\u0105dzenie Vizio o okre\u015blonej nazwie jest ju\u017c skonfigurowane."
         },
@@ -13,12 +14,16 @@
             "pair_tv": {
                 "data": {
                     "pin": "PIN"
-                }
+                },
+                "description": "Tw\u00f3j telewizor powinien wy\u015bwietla\u0107 kod. Wprowad\u017a ten kod do formularza, a nast\u0119pnie przejd\u017a do nast\u0119pnego kroku, aby zako\u0144czy\u0107 parowanie.",
+                "title": "Ko\u0144czenie procesu parowania"
             },
             "pairing_complete": {
+                "description": "Twoje urz\u0105dzenie VIZIO SmartCast jest teraz po\u0142\u0105czone z Home Assistant'em.",
                 "title": "Parowanie zako\u0144czone"
             },
             "pairing_complete_import": {
+                "description": "Twoje urz\u0105dzenie VIZIO SmartCast jest teraz po\u0142\u0105czone z Home Assistant'em.\n\nTw\u00f3j token dost\u0119powy to '**{access_token}**'.",
                 "title": "Parowanie zako\u0144czone"
             },
             "user": {
@@ -28,6 +33,7 @@
                     "host": "<Host/IP>:<Port>",
                     "name": "Nazwa"
                 },
+                "description": "Token dost\u0119powy potrzebny jest tylko dla telewizor\u00f3w. Je\u015bli konfigurujesz telewizor i nie masz jeszcze tokenu dost\u0119powego, pozostaw go pusty aby przej\u015b\u0107 przez proces parowania.",
                 "title": "Konfiguracja klienta Vizio SmartCast"
             }
         }
diff --git a/homeassistant/components/wled/translations/lb.json b/homeassistant/components/wled/translations/lb.json
index 13cfb7bc911..7657e1a12cc 100644
--- a/homeassistant/components/wled/translations/lb.json
+++ b/homeassistant/components/wled/translations/lb.json
@@ -1,24 +1,24 @@
 {
     "config": {
         "abort": {
-            "already_configured": "Wykryto urz\u0105dzenie [%key:component::wled::title%]",
-            "connection_error": "Wykryto urz\u0105dzenie [%key:component::wled::title%]"
+            "already_configured": "D\u00ebsen WLED Apparat ass scho konfigur\u00e9iert.",
+            "connection_error": "Feeler beim verbannen mam WLED Apparat."
         },
         "error": {
-            "connection_error": "Wykryto urz\u0105dzenie [%key:component::wled::title%]"
+            "connection_error": "Feeler beim verbannen mam WLED Apparat."
         },
-        "flow_title": "Wykryto urz\u0105dzenie [%key:component::wled::title%]",
+        "flow_title": "WLED: {name}",
         "step": {
             "user": {
                 "data": {
                     "host": "Numm oder IP Adresse"
                 },
-                "description": "Wykryto urz\u0105dzenie [%key:component::wled::title%]",
-                "title": "Wykryto urz\u0105dzenie [%key:component::wled::title%]"
+                "description": "D\u00e4in WLED als Integratioun mam Home Assistant ariichten.",
+                "title": "D\u00e4in WLED verbannen"
             },
             "zeroconf_confirm": {
-                "description": "Wykryto urz\u0105dzenie [%key:component::wled::title%]",
-                "title": "Wykryto urz\u0105dzenie [%key:component::wled::title%]"
+                "description": "Soll de WLED mam Numm `{name}` am Home Assistant dob\u00e4i gesaat ginn?",
+                "title": "Entdeckten WLED Apparat"
             }
         }
     }
diff --git a/homeassistant/components/zwave/translations/lb.json b/homeassistant/components/zwave/translations/lb.json
index 6ef36dff82e..7abe764c2a1 100644
--- a/homeassistant/components/zwave/translations/lb.json
+++ b/homeassistant/components/zwave/translations/lb.json
@@ -20,14 +20,14 @@
     },
     "state": {
         "_": {
-            "dead": "Net Ereechbar",
+            "dead": "Doud",
             "initializing": "Initialis\u00e9iert",
             "ready": "Bereet",
             "sleeping": "Schl\u00e9ift"
         },
         "query_stage": {
-            "dead": "Net Ereechbar ({query_stage})",
-            "initializing": "Initialis\u00e9iert ( {query_stage} )"
+            "dead": "Doud",
+            "initializing": "Initialis\u00e9iert"
         }
     }
 }
\ No newline at end of file