Remove deprecated Bosch BMP280 Environmental Sensor integration (#67280)

.coveragerc

@@ -117,7 +117,6 @@ omit =
     homeassistant/components/bluesound/*
     homeassistant/components/bluetooth_tracker/*
     homeassistant/components/bme680/sensor.py
-    homeassistant/components/bmp280/sensor.py
     homeassistant/components/bmw_connected_drive/__init__.py
     homeassistant/components/bmw_connected_drive/binary_sensor.py
     homeassistant/components/bmw_connected_drive/button.py

CODEOWNERS

@@ -117,7 +117,6 @@ tests/components/blink/* @fronzbot
 homeassistant/components/blueprint/* @home-assistant/core
 tests/components/blueprint/* @home-assistant/core
 homeassistant/components/bluesound/* @thrawnarn
-homeassistant/components/bmp280/* @belidzs
 homeassistant/components/bmw_connected_drive/* @gerard33 @rikroe
 tests/components/bmw_connected_drive/* @gerard33 @rikroe
 homeassistant/components/bond/* @bdraco @prystupa @joshs85

homeassistant/components/bmp280/__init__.py

@@ -1 +0,0 @@
-"""The Bosch BMP280 sensor integration."""

homeassistant/components/bmp280/manifest.json

@@ -1,9 +0,0 @@
-{
-  "domain": "bmp280",
-  "name": "Bosch BMP280 Environmental Sensor",
-  "documentation": "https://www.home-assistant.io/integrations/bmp280",
-  "codeowners": ["@belidzs"],
-  "requirements": ["adafruit-circuitpython-bmp280==3.1.1", "RPi.GPIO==0.7.1a4"],
-  "quality_scale": "silver",
-  "iot_class": "local_polling"
-}

homeassistant/components/bmp280/sensor.py

@@ -1,148 +0,0 @@
-"""Platform for Bosch BMP280 Environmental Sensor integration."""
-from __future__ import annotations
-
-from datetime import timedelta
-import logging
-
-from adafruit_bmp280 import Adafruit_BMP280_I2C
-import board
-from busio import I2C
-import voluptuous as vol
-
-from homeassistant.components.sensor import (
-    PLATFORM_SCHEMA,
-    SensorDeviceClass,
-    SensorEntity,
-)
-from homeassistant.const import CONF_NAME, PRESSURE_HPA, TEMP_CELSIUS
-from homeassistant.core import HomeAssistant
-from homeassistant.exceptions import PlatformNotReady
-import homeassistant.helpers.config_validation as cv
-from homeassistant.helpers.entity_platform import AddEntitiesCallback
-from homeassistant.helpers.typing import ConfigType, DiscoveryInfoType
-from homeassistant.util import Throttle
-
-_LOGGER = logging.getLogger(__name__)
-
-DEFAULT_NAME = "BMP280"
-SCAN_INTERVAL = timedelta(seconds=15)
-
-MIN_TIME_BETWEEN_UPDATES = timedelta(seconds=3)
-
-MIN_I2C_ADDRESS = 0x76
-MAX_I2C_ADDRESS = 0x77
-
-CONF_I2C_ADDRESS = "i2c_address"
-
-PLATFORM_SCHEMA = PLATFORM_SCHEMA.extend(
-    {
-        vol.Optional(CONF_NAME, default=DEFAULT_NAME): cv.string,
-        vol.Required(CONF_I2C_ADDRESS): vol.All(
-            vol.Coerce(int), vol.Range(min=MIN_I2C_ADDRESS, max=MAX_I2C_ADDRESS)
-        ),
-    }
-)
-
-
-def setup_platform(
-    hass: HomeAssistant,
-    config: ConfigType,
-    add_entities: AddEntitiesCallback,
-    discovery_info: DiscoveryInfoType | None = None,
-) -> None:
-    """Set up the sensor platform."""
-    _LOGGER.warning(
-        "The Bosch BMP280 Environmental Sensor integration is deprecated and "
-        "will be removed in Home Assistant Core 2022.4; "
-        "this integration is removed under Architectural Decision Record 0019, "
-        "more information can be found here: "
-        "https://github.com/home-assistant/architecture/blob/master/adr/0019-GPIO.md"
-    )
-
-    try:
-        # initializing I2C bus using the auto-detected pins
-        i2c = I2C(board.SCL, board.SDA)
-        # initializing the sensor
-        bmp280 = Adafruit_BMP280_I2C(i2c, address=config[CONF_I2C_ADDRESS])
-    except ValueError as error:
-        # this usually happens when the board is I2C capable, but the device can't be found at the configured address
-        if str(error.args[0]).startswith("No I2C device at address"):
-            _LOGGER.error(
-                "%s. Hint: Check wiring and make sure that the SDO pin is tied to either ground (0x76) or VCC (0x77)",
-                error.args[0],
-            )
-            raise PlatformNotReady() from error
-        _LOGGER.error(error)
-        return
-    # use custom name if there's any
-    name = config[CONF_NAME]
-    # BMP280 has both temperature and pressure sensing capability
-    add_entities(
-        [Bmp280TemperatureSensor(bmp280, name), Bmp280PressureSensor(bmp280, name)]
-    )
-
-
-class Bmp280Sensor(SensorEntity):
-    """Base class for BMP280 entities."""
-
-    def __init__(
-        self,
-        bmp280: Adafruit_BMP280_I2C,
-        name: str,
-        unit_of_measurement: str,
-        device_class: str,
-    ) -> None:
-        """Initialize the sensor."""
-        self._bmp280 = bmp280
-        self._attr_name = name
-        self._attr_native_unit_of_measurement = unit_of_measurement
-
-
-class Bmp280TemperatureSensor(Bmp280Sensor):
-    """Representation of a Bosch BMP280 Temperature Sensor."""
-
-    def __init__(self, bmp280: Adafruit_BMP280_I2C, name: str) -> None:
-        """Initialize the entity."""
-        super().__init__(
-            bmp280, f"{name} Temperature", TEMP_CELSIUS, SensorDeviceClass.TEMPERATURE
-        )
-
-    @Throttle(MIN_TIME_BETWEEN_UPDATES)
-    def update(self):
-        """Fetch new state data for the sensor."""
-        try:
-            self._attr_native_value = round(self._bmp280.temperature, 1)
-            if not self.available:
-                _LOGGER.warning("Communication restored with temperature sensor")
-                self._attr_available = True
-        except OSError:
-            # this is thrown when a working sensor is unplugged between two updates
-            _LOGGER.warning(
-                "Unable to read temperature data due to a communication problem"
-            )
-            self._attr_available = False
-
-
-class Bmp280PressureSensor(Bmp280Sensor):
-    """Representation of a Bosch BMP280 Barometric Pressure Sensor."""
-
-    def __init__(self, bmp280: Adafruit_BMP280_I2C, name: str) -> None:
-        """Initialize the entity."""
-        super().__init__(
-            bmp280, f"{name} Pressure", PRESSURE_HPA, SensorDeviceClass.PRESSURE
-        )
-
-    @Throttle(MIN_TIME_BETWEEN_UPDATES)
-    def update(self):
-        """Fetch new state data for the sensor."""
-        try:
-            self._attr_native_value = round(self._bmp280.pressure)
-            if not self.available:
-                _LOGGER.warning("Communication restored with pressure sensor")
-                self._attr_available = True
-        except OSError:
-            # this is thrown when a working sensor is unplugged between two updates
-            _LOGGER.warning(
-                "Unable to read pressure data due to a communication problem"
-            )
-            self._attr_available = False

requirements_all.txt

@@ -49,7 +49,6 @@ PyViCare==2.16.1
 # homeassistant.components.xiaomi_aqara
 PyXiaomiGateway==0.13.4
 
-# homeassistant.components.bmp280
 # homeassistant.components.rpi_gpio
 # RPi.GPIO==0.7.1a4
 
@@ -74,9 +73,6 @@ abodepy==1.2.0
 # homeassistant.components.accuweather
 accuweather==0.3.0
 
-# homeassistant.components.bmp280
-adafruit-circuitpython-bmp280==3.1.1
-
 # homeassistant.components.adax
 adax==0.2.0