* Update nx584 requirement to 0.4
There have been a few bug fixes to nx584 since 0.2, so this just updates
our requirement to pull in the newer version.
* Fix nx584 if no partitions are found
If we succeed in our connection to the panel but find no
configured partitions, then we will fall through to the bypass
probe and fail because 'zones' is never initialized. This fixes
both exception paths and adds a test that would poke it.
* Allow to specify TTS language in the service call.
* Allow to specify TTS language in the service call.
* Respect 79 char limit
* Fix "Too many blank lines"
* Fix "Too many blank lines"
* Fix "Too many blank lines"
* Change language to be optional parameter of *get_tts_audio
* Change language to be optional parameter of *get_tts_audio
* Respect 79 char limit
* Don't pass "None
* Use default of "None" for TTS language
* Use default of "None" for TTS language
* Don't pass "None"
* Change TTS cache key to be hash_lang_engine
* Change language from demo to en
* Fix wrong replace
* TTS Component / Google speech platform
* Change file backend handling / cache
* Use mimetype / rename Provider function / allow cache on service call
* Add a memcache for faster response
* Add demo platform
* First version of unittest
* Address comments
* improve error handling / address comments
* Add google unittest & check http response code
* Change url param handling
* add test for other language
* Change hash to sha256 for same hash on every os/hardware
* add unittest for receive demo data
* add test for error cases
* Test case load from file to mem over aiohttp server
* Use cache SpeechManager level, address other comments
* Add service for clear cache
* Update service.yaml
* add support for spliting google message
* change unifi dependency to pyunifi
* Change dependency to fix#4336
* Run gen_requirements_all.py script
* Changed import statement to reflect new package
* Updated test_unifiy.py with different module
* Update requirements_all.txt
* Migrate remote to async
* add coro
* remove sync from init since only used in harmony
* import ATTR from remote
* remove unused sync stuff from tests
* Add source_list to universal media player
* Expanded attirubte and command support for UMP
Added support to the universal media player
for the following:
Volume Set
Current Source
Set Source
Current Volume
The goal is to facilitate a single-card media player
that includes source selection and setting the volume
of the receiver.
Example setup:
```
media_player:
- platform: universal
name: Media Center
children:
- media_player.kodi
- media_player.cast
commands:
select_source:
service: media_player.select_source
data:
entity_id: media_player.receiver
volume_set:
service: media_player.volume_set
data:
entity_id: media_player.receiver
volume_mute:
service: media_player.volume_mute
data:
entity_id: media_player.receiver
turn_on:
service: homeassistant.turn_on
data:
entity_id: media_player.receiver
turn_off:
service: homeassistant.turn_off
data:
entity_id: media_player.receiver
attributes:
state: media_player.receiver
is_volume_muted: media_player.receiver|is_volume_muted
volume_level: media_player.receiver|volume_level
source: media_player.receiver|source
source_list: media_player.receiver|source_list
```
* Remove print statements
* Change service call back to use call_from_config
* Modified service calls to use template data
* linting fixes
* Add tests
* linting fices
* More pylinting
* Add option to hide the group card switch
* Disallow control of hidden group switches
* Revert "Disallow control of hidden group switches"
This reverts commit 75e5ddfe3092327647e2873cb03ccf3b4a75b85a.
* Changed hide_switch to control
* Fixed attributes that are lists cuasing invalid influx syntax
* Added bool and fixed mixed data type issue
* Fixed changing nearly all data types to float causing some worse influxdb errors. whoops
* Added line to end of file
* Add MAC vendor lookup for device_tracker.
* Test vendor mac lookup and fix device attribute.
* Generate requirements.
* Style.
* Use hyphen instead of underscore to satisfy 'idna'.
https://github.com/kjd/idna/issues/17
* Resort imports.
* Refactor macvendor to use macvendors.com API instead of netaddr library.
* Test vendor lookup using macvendors.com api.
* Remove debugging.
* Correct description.
* No longer needed.
* Device tracker is now an async component. Fix ddwrt tests.
* Fix linting.
* Add test case for error conditions.
* There is no reason to retry failes vendor loopups as they won't be saved to the file anyways at that point.
* Sorry, bad assumption, this only made things worse.
* Wait for async parts during setup component to complete before asserting results.
* Fix linting.
* Is generated when running 'coverage html'.
* Undo isort.
* Make aioclient_mock exception more generic.
* Only lookup mac vendor string with adding new device to known_devices.yaml.
* Undo isort.
* Revert unneeded change.
* Adjust to use new websession pattern.
* Always make sure to cleanup response.
* Use correct function to release response.
* Fix tests.
* Initial Harmony device support, working current activity sensor and switch for each activity
TODO: add new device per hub to send device specific activity
Changes to be committed:
new file: homeassistant/components/harmony.py
new file: homeassistant/components/sensor/harmony.py
new file: homeassistant/components/switch/harmony.py
* ready for beta, I think
Changes to be committed:
modified: homeassistant/components/harmony.py
modified: homeassistant/components/sensor/harmony.py
modified: homeassistant/components/switch/harmony.py
* Changes to be committed:
modified: homeassistant/components/harmony.py
new file: homeassistant/components/remote/__init__.py
new file: homeassistant/components/remote/harmony.py
new file: homeassistant/components/remote/services.yaml
modified: homeassistant/components/sensor/harmony.py
modified: homeassistant/components/switch/harmony.py
Implemented remote component and harmony platform
* streamlined harmony support
* typo
* Initial Harmony device support, working current activity sensor and switch for each activity
TODO: add new device per hub to send device specific activity
Changes to be committed:
new file: homeassistant/components/harmony.py
new file: homeassistant/components/sensor/harmony.py
new file: homeassistant/components/switch/harmony.py
* ready for beta, I think
Changes to be committed:
modified: homeassistant/components/harmony.py
modified: homeassistant/components/sensor/harmony.py
modified: homeassistant/components/switch/harmony.py
* Changes to be committed:
modified: homeassistant/components/harmony.py
new file: homeassistant/components/remote/__init__.py
new file: homeassistant/components/remote/harmony.py
new file: homeassistant/components/remote/services.yaml
modified: homeassistant/components/sensor/harmony.py
modified: homeassistant/components/switch/harmony.py
Implemented remote component and harmony platform
* streamlined harmony support
* typo
* reworked token generation
* delete
* Initial Harmony device support, working current activity sensor and switch for each activity
TODO: add new device per hub to send device specific activity
Changes to be committed:
new file: homeassistant/components/harmony.py
new file: homeassistant/components/sensor/harmony.py
new file: homeassistant/components/switch/harmony.py
* Initial Harmony device support, working current activity sensor and switch for each activity
TODO: add new device per hub to send device specific activity
Changes to be committed:
new file: homeassistant/components/harmony.py
new file: homeassistant/components/sensor/harmony.py
new file: homeassistant/components/switch/harmony.py
* ready for beta, I think
Changes to be committed:
modified: homeassistant/components/harmony.py
modified: homeassistant/components/sensor/harmony.py
modified: homeassistant/components/switch/harmony.py
* ready for beta, I think
Changes to be committed:
modified: homeassistant/components/harmony.py
modified: homeassistant/components/sensor/harmony.py
modified: homeassistant/components/switch/harmony.py
* Changes to be committed:
modified: homeassistant/components/harmony.py
new file: homeassistant/components/remote/__init__.py
new file: homeassistant/components/remote/harmony.py
new file: homeassistant/components/remote/services.yaml
modified: homeassistant/components/sensor/harmony.py
modified: homeassistant/components/switch/harmony.py
Implemented remote component and harmony platform
* streamlined harmony support
* typo
* reworked token generation
* delete
* readded after rebase
* cleaning up style errors
* modified .coveragerc
* moved import statements
* added more debug logging
* Added URL encoding of token received from Logitech
* Corrected import for python 3
* new pyharmony version
* new pyharmony version
* remote tests
* only write config file if not present or sync service is called
* more tests
* more tests
* bumped pyharmony version to work with new auth
* bumped pyharmony version to work with new auth
* style corrections
* harmony local auth and remote demo platform
* style fix
* PR refinements and permission issues
* forgot a blank line
* removed sync test from test_init
* removed sync test from test_init
* visual indent
* send_command test in demo platform
* Add exception handling to request call to prevent
failure in setup_platform if host is down
* update for comments
* update test for state being none
* remove unused import
