* Wemo Dimmer Support
Add support for the Wemo Dimmer Switch
* Add newline at end of file
Re: findings from hound
* Syntax for the hound
Sorry for the excess edits, new to python
* Change order of Models
Fixed order back to ABC order
* Changes as requested
I made the changes I was comfortable with at this point, the dimmer addition now very closely mirrors what is under the switch component, at least as far as the parts necessary for the dimmer.
Any changes past these with regards to the subscription registry / callback info is probably going to be over my head, but I will try to look deeper at them if required.
* Remove unnecessary lines
Removed self.schedule_update_ha_state() from turn off / turn on
* Remove update(self)
Removed update method
* Move subscription to async_added_to_hass
* Move subscription.
* Clean up.
* Wait until the job in the executor is done
* Run gen_requirements_all script
* Only update instance attributes via callback
* Hyperion: Add brightness, HDMI and effect support
- added brightness support to dim the hyperion light
- changed the "OFF" command to set the color to [0,0,0] after clearing all priorities.
This is neccesary to keep the light turned off when an HDMI grabber is used for ambilight with hyperion.
- added HDMI ambilight mode recognition and control.
by setting the "hdmi_priority" in your "configuration.yaml" file (defaults to 880), home assistant will now be able to recognize when the hyperion light is in HDMI ambilight mode and will change its icon to an HDMI symbol and set the status to ON.
Switching the hyperion light to HDMI ambilight mode can be done through the effect option (clears all priorities such that the HDMI grabber remains).
- added effect support for the default effects of hyperion, a custom list can be defined in the "configuration.yaml" file by using the "effect_list" option.
* Hyperion: Add brightness, HDMI and effect support
- added brightness support to dim the hyperion light
- changed the "OFF" command to set the color to [0,0,0] after clearing all priorities.
This is neccesary to keep the light turned off when an HDMI grabber is used for ambilight with hyperion.
- added HDMI ambilight mode recognition and control.
by setting the "hdmi_priority" in your "configuration.yaml" file (defaults to 880), home assistant will now be able to recognize when the hyperion light is in HDMI ambilight mode and will change its icon to an HDMI symbol and set the status to ON.
Switching the hyperion light to HDMI ambilight mode can be done through the effect option (clears all priorities such that the HDMI grabber remains).
- added effect support for the default effects of hyperion, a custom list can be defined in the "configuration.yaml" file by using the "effect_list" option.
- fixed some style issues with too long lines
* Hyperion: Add brightness, HDMI and effect support
- fixed some more indentation style issues
* Hyperion: Add brightness, HDMI and effect support
- yet more fixed visuel indent issues
* Hyperion: Add brightness, HDMI and effect support
- more visuel indents
* Hyperion: Add brightness, HDMI and effect support
- fixed invalid variable "A"
* Hyperion: Add brightness, HDMI and effect support
- remove unnececary brackets
- specify specific exceptions
* correct changing state holding attributes during a service method
Proccesed the comments of @MartinHjelmare: https://github.com/home-assistant/home-assistant/pull/11543#pullrequestreview-88328659
* indent correction
corrected tab instead of 4 spaces
* Hyperion: Add brightness, HDMI and effect support
- changed 'none' to None
- renamed "self._skip_check" to "self._skip_update"
* Add brightness, HDMI and effect support
changed checking if a list is empty from "list == []" to "not list"
* Deprecate explicit entity_id in template platforms
* Use config validator for deprecation
* Fix copy/paste typos
* Also print the config value
* Add test for config validator
* Assert the module name that logged the message
* trying to rework device discovery. now the main component will do the getlinked and pass it to the sub-components. no longer any config needed other than what is needed to connect to the hub. device names are no longer stored. core team told us to stop using configurator to ask for names. there should be a way to set names in hass...possibly this https://home-assistant.io/docs/configuration/customizing-devices/
* fix device types
* make device names just be the isnteon device id
* revert some config changes
* Update insteon_local.py
* Update insteon_local.py
* Update insteon_local.py
* Update insteon_local.py
* Update insteon_local.py
* Update insteon_local.py
* Update insteon_local.py
* update insteon client
* linting fixes
* Error Clean up
* Update to make requested changes
* more changes
* Finish requested changes to components
* Fixing Rebase Conflicts
* fix device types
* make device names just be the isnteon device id
* revert some config changes
* Update insteon_local.py
* Update insteon_local.py
* Update insteon_local.py
* Update insteon_local.py
* Update insteon_local.py
* Update insteon_local.py
* Update insteon_local.py
* update insteon client
* linting fixes
* Error Clean up
* Update to make requested changes
* more changes
* Finish requested changes to components
* Update Insteon_Local for performance improvements
* Fix errors from get_linked
* Fix typo
* Requested changes
* Fix spacing
* Clean up
* Requested Changes
* Lazy loading of service descriptions
* Fix tests
* Load YAML in executor
* Return a copy of available services to allow mutations
* Remove lint
* Add zha/services.yaml
* Only cache descriptions for known services
* Remove lint
* Remove description loading during service registration
* Remove description parameter from async_register
* Test async_get_all_descriptions
* Remove lint
* Fix typos from multi-edit
* Remove unused arguments
* Remove unused import os
* Remove unused import os, part 2
* Remove unneeded coroutine decorator
* Only use executor for loading files
* Cleanups suggested in review
* Increase test coverage
* Fix races in existing tests
* Issue #11432: Do not stop initializing KNX when tunelling device cant be reached
* Issue #11432: Mark devices as unavailable if gateway cant be connected
* Add new iGlo component
* Missing comma
Add extra blank lines
* Dont change state in turn_on
Remove unused variables
Update before add
* Fixing some lint issues
* Base implementation of component, no sensors yet
* Added senor files
* First fully working chain of sensors and binary sensors going from hardware in to hass
* Clean up
* Clean up
* Added light platform
* Turning lights on and off and set brightness now works
* Pydeconz is now a proper pypi package
Stop sessions when Home Assistant is shutting down
Use a simpler websocket client
* Updated pydocstrings
Followed recommendations from pylint and flake8
* Clean up
* Updated requirements_all.txt
* Updated Codeowners to include deconz.py
Also re-added the Axis component since it had gotten removed
* Bump requirement
* Bumped to v2
Reran script/gen_requirements
* Removed global DECONZ since it wasn't relevant any more
* Username and password is only relevant in the context of getting a API key
* Add support for additional sensors
* Added support for groups
* Moved import of component library to inside of methods
* Moved the need for device id to library
* Bump pydeconz to v5
* Add support for colored lights
* Pylint and flake8 import improvements
* DATA_DECONZ TO DECONZ_DATA
* Add support for transition time
* Add support for flash
* Bump to v7
* ZHASwitch devices will now only generate events by default, instead of being a sensor entity
* Clean up
* Add battery sensor when device signals through an event
* Third-party library communicates with service
* Add support for effect colorloop
* Bump to pydeconz v8
* Same domain everywhere
* Clean up
* Updated requirements_all
* Generated API key will now be stored in a config file
* Change battery sensor to register to callback since library now supports multiple callbacks
Move DeconzEvent to hub
Bump to v9
* Improve entity attributes
* Change end of battery name to battery level
No need for static icon variable when using battery level helper
* Bump requirement to v10
* Improve pydocstring for DeconzEvent
Rename TYPE_AS_EVENT to CONF_TYPE_AS_EVENT
* Allow separate brightness to override RGB brightness
* Expose device.reachable in entity available property
* Bump requirement to 11 (it goes up to 11!)
* Pylint comment
* Binary sensors don't have unit of measurement
* Removed service to generate API key in favor of just generating it as a last resort of no API key is specified in configuration.yaml or deconz.conf
* Replace clear text to attribute definitions
* Use more constants
* Bump requirements to v12
* Color temp requires xy color support
* Only ZHASwitch should be an event
* Bump requirements to v13
* Added effect_list property
* Add attribute to battery sensor to easy find event id
* Bump requirements to v14
* Fix hound comment
* Bumped requirements_all information to v14
* Add service to configure devices on deCONZ
* Add initial support for scenes
* Bump requirements to v15
* Fix review comments
* Python doc string improvement
* Improve setup and error handling during setup
* Changed how to evaluate light features
* Remove 'ghost' events by not triggering updates if the signal originates from a config event
Bump requirement to v17
* Fix pylint issue by moving scene ownership in to groups in requirement pydeconz
Bump requirement to v18
* Added configurator option to register to deCONZ when unlocking gateway through settings
Bump requirement to v20
* Improve async configurator
* No user interaction for deconz.conf
* No file management in event loop
* Improve readability of load platform
* Fewer entity attributes
* Use values() instead of items() for dicts where applicable
* Do one add devices per platform
* Clean up of unused attributes
* Make sure that discovery info is not None
* Only register configure service and shutdown service when deconz has been setup properly
* Move description
* Fix lines longer than 80
* Moved deconz services to a separate file and moved hub to deconz/__init__.py
* Remove option to configure switch as entity
* Moved DeconzEvent to sensor since it is only Switch buttonpress that will be sent as event
* Added support for automatic discovery of deconz
Thanks to Kroimon for adding support to netdisco
* Use markup for configuration description
* Fix coveragerc
* Remove deCONZ support from Hue component
* Improved docstrings and readability
* Remove unnecessary extra name for storing in hass.data, using domain instead
* Improve readability by renaming all async methods
Bump to v21 - improved async naming on methods
* Fix first line not being in imperative mood
* Added logo to configurator
Let deconz.conf be visible since it will be the main config for the component after initial setup
* Removed bridge_type from new unit tests as part of removing deconz support from hue component
* Capitalize first letters of Battery Level
* Properly update state of sensor as well as reachable and battery
Bump dependency to v22
* Fix flake8 Multi-line docstring closing quotes should be on a separate line
* Fix martinhjelmares comments
Bump dependency to v23
Use only HASS aiohttp session
Change when to use 'deconz' or domain or deconz data
Clean up unused logger defines
Remove unnecessary return values
Fix faulty references to component documentation
Move callback registration to after entity has been initialized by HASS
Less inception style on pydocs ;)
Simplify loading platforms by using a for loop
Added voluptous schema for service
Yaml file is for deconz only, no need to have the domain present
Remove domain constraint when creating event title
Reverts energy and power unit conversions added in #10979 as they break
early devices.
A proper fix should be implemented in the pyhs100 library which should
return common units across all devices/firmwares.
* Use different colour channel intensities in tests
Uses a different value for each colour channel in MQTT light tests to
properly differentiate between colour channels.
* Correct ordering of RGB channels in MQTT light
* Correct units used in TP-Link energy monioring
- Energy is measured in kWh for swtches
- Power is reported in mW for bulbs
- Energy is reported in Wh for bulbs
* TP-Ling energy: store units in attribute names
Stores the unit in the attrbute names for TP-Link devices that support
energy monitoring.
* Huge ISY994 platform cleanup, fixes support for 5.0.10 firmware
# * No more globals - store on hass.data
# * Parent ISY994 component handles categorizing nodes in to Hass components, rather than each individual domain filtering all nodes themselves
# * Remove hidden string, replace with ignore string. Hidden should be done via the customize block; ignore fully prevents the node from getting a Hass entity
# * Removed a few unused methods in the ISYDevice class
# * Cleaned up the hostname parsing
# * Removed broken logic in the fan Program component. It was setting properties that have no setters
# * Added the missing SUPPORTED_FEATURES to the fan component to indicate that it can set speed
# * Added better error handling and a log warning when an ISY994 program entity fails to initialize
# * Cleaned up a few instances of unecessarily complicated logic paths, and other cases of unnecessary logic that is already handled by base classes
* Use `super()` instead of explicit base class calls
* Move `hass` argument to first position
* Use str.format instead of string addition
* Move program structure building and validation to component
Removes the need for a bunch of duplicate exception handling in each individual platform
* Fix climate nodes, fix climate names, add config to disable climate
Sensor platform was crashing when the ISY reported climate nodes. Logic has been fixed. Also added a config option to prevent climate sensors from getting imported from the ISY. Also replace the underscore from climate node names with spaces so they default to friendly names.
* Space missing in error message
* Fix string comparison to use `==`
* Explicitly check for attributes rather than catch AttributeError
Also removes two stray debug lines
* Remove null checks on hass.data, as they are always null at this point
* Improve support for multiple Hue bridges with lights that have the same id.
The old code pre-refactoring kept a per-bridge list of lights in a closure; my refactoring moved that to hass.data, which is convenient but caused them to conflict with each other.
Fixes#11183
* Update test_hue.py
* Fix X10 commands for mochad light turn on
This commit attempts to address issues that a lot of people are having
with the x10 light component. Originally this was written to use the
xdim (extended dim) X10 command. However, not every X10 dimmer device
supports the xdim command. Additionally, it turns out the number of
dim/brighness levels the X10 device supports is device specific and
there is no way to detect this (given the mostly 1 way nature of X10)
To address these issues, this commit removes the usage of xdim and
instead relies on using the 'on' command and the 'dim' command. This
should work on all x10 light devices. In an attempt to address the
different dim/brightness levels supported by different devices this
commit also adds a new optional config value, 'brightness_levels', to
specify if it's either 32, 64, or 256. By default 32 levels are used
as this is the normal case and what is documented by mochad.
Fixes#8943
* make code more readable
* fix style
* fix lint
* fix tests
* Introduce a new Hue component that knows how to talk to a Hue bridge, but doesn't actually set up lights.
* Refactor the hue lights platform to use the HueBridge class from the hue component.
* Reimplement support for multiple bridges
* Auto discover bridges.
* Provide some migration support by showing a persistent notification.
* Address most feedback from code review.
* Call load_platform from inside HueBridge.setup passing the bridge id.
Not only this looks nicer, but it also nicely solves additional bridges being added after initial setup (e.g. pairing a second bridge should work now, I believe it required a restart before).
* Add a unit test for hue_activate_scene
* Address feedback from code review.
* After feedback from @andrey-git I was able to find a way to not import phue in tests, yay!
* Inject a mock phue in a couple of places
All mochad devices are sharing a single socket interface. When multiple
threads are issuing requests to the mochad daemon at the same time the
write read cycle might get crossed between the threads. This is normally
not an issue for 1-way X10 devices because as long as the request issued
successfully and data is read over the socket then we know as much as
mochad will tell us (since there is no ACK from the request for most
X10 devices). However, where it does matter is on the device __init__()
because we're relying on the mochad daemon's internal state to take an
educated guess at the device's state to intialize things with. When
there are multiple devices being initialized at the same time the wires
can get crossed between and the wrong device state may be read.
To address this potential issue this commit adds locking using a
semaphore around all pairs of send_cmd() and read_data() (which is what
pymochad.device.Device.get_status() does internally) calls to the mochad
controller to ensure we're only ever dealing with a single request at a
time.
Fixesmtreinish/pymochad#4
* add ads hub, light and switch
* add binary sensor prototype
* switch: use adsvar for connection
* fix some issues with binary sensor
* fix binary sensor
* fix all platforms
* use latest pyads
* fixed error with multiple binary sensors
* add sensor
* add ads sensor
* clean up after shutdown
* ads component with platforms switch, binary_sensor, light, sensor
add locking
poll sensors at startup
update state of ads switch and light
update ads requirements
remove update() from constructors on ads platforms
omit ads coverage
ads catch read error when polling
* add ads service
* add default settings for use_notify and poll_interval
* fix too long line
* Fix style issues
* no pydocstyle errors
* Send and receive native brightness data to ADS device to prevent issues with math.floor reducing brightness -1 at every switch
* Enable non dimmable lights
* remove setting of self._state in switch
* remove polling
* Revert "remove polling"
This reverts commit 7da420f82385a4a5c66a929af7025c00ed197e86.
* add service schema, add links to documentation
* fix naming, cleanup
* re-remove polling
* use async_added_to_hass for setup of callbacks
* fix comment.
* add callbacks for changed values
* use async_add_job for creating device notifications
* set should_poll to False for all platforms
* change should_poll to property
* add service description to services.yaml
* add for brigthness not being None
* put ads component in package
* Remove whitespace
* omit ads package
* Refactored to new global json saving and loading
* Fixed emulated_hue tests
* Removed unnecassary error handling
* Added missing newline
* Remove unused imports
* Fixed linting error
* Moved _load_json wrapper out of the config class
