* Add default device class display precision for Sensor
* Renaming, docstrings, cleanup
* Simplify units list
* Fix tests
* Fix missing precision when suggested is specified
* Update snapshots
* Fix when unit of measurement is not valid
* Fix tests
* Fix deprecated unit usage
* Fix goalzero tests
The sensor native_value method was accessing the data dict and trowing,
since the mock did not have any data for the sensors.
Since now the precision is always specified (it was missing for those
sensors), the throw was hitting async_update_entity_options in _update_suggested_precision.
Previously, async_update_entity_options was not called since it had no
precision.
* Fix metoffice
* Fix smartthings
* Add default sensor data for Tesla Wall Connector tests
* Update snapshots
* Revert spaces
* Update smartthings snapshots
* Add missing sensor mock for tesla wall connector
* Address review comments
* Add doc comment
* Add cap to doc comment
* Update comment
* Update snapshots
* Update comment
* Add WS command to help reset custom entity_id
* Calculate suggested object id from entity properties
* Fix logic and add additional tests
* Adjust test
* Update folder_watcher test
* Handle current entity id matches the automatic entity id
* Don't store calculated_object_id
* Update snapshots
* Update snapshots
* Update test
* Tweak logic for reusing current entity_id
* Improve test
* Don't assign same entity_id to several entities
* Prioritize custom entity name
* Update snapshots
* Update snapshots
* Reapply "Add support for subentries to config entries" (#133470) (#136061)
* Reapply "Add support for subentries to config entries" (#133470)
This reverts commit ecb3bf79f3.
* Update test snapshot
* Add config subentry support to device registry (#128157)
* Add config subentry support to device registry
* Apply suggestions from code review
* Update syrupy serializer
* Update snapshots
* Address review comments
* Allow a device to be connected to no or a single subentry of a config entry
* Update snapshots
* Revert "Allow a device to be connected to no or a single subentry of a config entry"
This reverts commit ec6f613151cb4a806b7961033c004b71b76510c2.
* Update test snapshots
* Bump release version in comments
* Rename config_subentries to config_entries_subentries
* Add config subentry support to entity registry (#128155)
* Add config subentry support to entity registry
* Update syrupy serializer
* Update snapshots
* Update snapshots
* Accept suggested changes
* Clean registries when removing subentry (#136671)
* Clean up registries when removing subentry
* Update tests
* Clean up subentries from deleted devices when removing config entry (#136669)
* Clean up subentries from deleted devices when removing config entry
* Move
* Add config subentry support to entity platform (#128161)
* Add config subentry support to entity platform
* Rename subentry_id to config_subentry_id
* Store subentry type in subentry (#136687)
* Add reconfigure support to config subentries (#133353)
* Add reconfigure support to config subentries
* Update test
* Minor adjustment
* Rename supported_subentry_flows to supported_subentry_types
* Address review comments
* Add subentry support to kitchen sink (#136755)
* Add subentry support to kitchen sink
* Add subentry reconfigure support to kitchen_sink
* Update kitchen_sink tests with subentry type stored in config entry
* Update kitchen_sink
* Update kitchen_sink
* Adjust kitchen sink tests
* Fix hassfest
* Apply suggestions from code review
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Improve docstrings and strings.json
---------
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update snapshots
* Update snapshots
* Update snapshots
* Update snapshots
* Update snapshots
* Update snapshots
* Update snapshots
---------
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Index config entry discovery_keys by discovery domain
* Add new signal
* Update tests
* Update homeassistant/config_entries.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Fix imports
---------
Co-authored-by: J. Nick Koston <nick@koston.org>
* Reinitialize zeroconf discovery flow on unignore
* Adjust tests
* Improve comments
* Fix logic for updating discovery keys
* Add tests
* Use mock_config_flow helper in new config_entries test
* Add discovery_keys attribute to ConfigEntry
* Update zeroconf rediscovery
* Change type of ConfigEntry.discovery_keys
* Update tests
* Fix DiscoveryKey.from_json_dict and add tests
* Fix test
---------
Co-authored-by: J. Nick Koston <nick@koston.org>
airzone: climate: allow turning slave zone on with any hvac mode
If the user selects a different mode on a slave zone from the one selected on
the master zone, it will raise an exception and it won't change the operation
mode or turn it on.
Change this behaviour so that the exception will still be raised but the slave
zone will be turned on and the hvac mode won't be changed.
This allows commanding airzone slave zones from limited APIs like homekit.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* airzone: climate: fix max/min temps
The library now provides AZD_ABS_TEMP_MAX/AZD_ABS_TEMP_MIN which are useful for
devices with different max/min temperatures depending on the current working
mode (HEAT vs COOL).
These new values will have the highest/lowest max/min of both modes.
Until now, the max/min of the current working mode (HEAT/COOL) would be set
when starting Home Assistant, limiting the temperature range if the device
mode was changed after that.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* airzone: climate: update max/min temps
Some devices have different max/min climate temps depending on the active
mode (HEAT vs COOL), so we should update these values.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* Revert "airzone: climate: update max/min temps"
This reverts commit 988194d486.
* Revert "Revert "airzone: climate: update max/min temps""
This reverts commit e4ead24f71.
* tests: airzone: add max/min climate changes test
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* tests: airzone: fix dict copy
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
---------
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* airzone: climate: add Temperature range support
This is useful for HEAT_COOL climate mode (Airzone AUTO).
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* trigger CI
---------
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
