"""Support for Tuya binary sensors."""

from __future__ import annotations

from dataclasses import dataclass

from tuya_sharing import CustomerDevice, Manager

from homeassistant.components.binary_sensor import (
    BinarySensorDeviceClass,
    BinarySensorEntity,
    BinarySensorEntityDescription,
)
from homeassistant.const import EntityCategory
from homeassistant.core import HomeAssistant, callback
from homeassistant.helpers.dispatcher import async_dispatcher_connect
from homeassistant.helpers.entity_platform import AddConfigEntryEntitiesCallback
from homeassistant.util.json import json_loads

from . import TuyaConfigEntry
from .const import TUYA_DISCOVERY_NEW, DeviceCategory, DPCode, DPType
from .entity import TuyaEntity


@dataclass(frozen=True)
class TuyaBinarySensorEntityDescription(BinarySensorEntityDescription):
    """Describes a Tuya binary sensor."""

    # DPCode, to use. If None, the key will be used as DPCode
    dpcode: DPCode | None = None

    # Value or values to consider binary sensor to be "on"
    on_value: bool | float | int | str | set[bool | float | int | str] = True

    # For DPType.BITMAP, the bitmap_key is used to extract the bit mask
    bitmap_key: str | None = None


# Commonly used sensors
TAMPER_BINARY_SENSOR = TuyaBinarySensorEntityDescription(
    key=DPCode.TEMPER_ALARM,
    name="Tamper",
    device_class=BinarySensorDeviceClass.TAMPER,
    entity_category=EntityCategory.DIAGNOSTIC,
)


# All descriptions can be found here. Mostly the Boolean data types in the
# default status set of each category (that don't have a set instruction)
# end up being a binary sensor.
BINARY_SENSORS: dict[DeviceCategory, tuple[TuyaBinarySensorEntityDescription, ...]] = {
    DeviceCategory.CO2BJ: (
        TuyaBinarySensorEntityDescription(
            key=DPCode.CO2_STATE,
            device_class=BinarySensorDeviceClass.SAFETY,
            on_value="alarm",
        ),
        TAMPER_BINARY_SENSOR,
    ),
    DeviceCategory.COBJ: (
        TuyaBinarySensorEntityDescription(
            key=DPCode.CO_STATE,
            device_class=BinarySensorDeviceClass.SAFETY,
            on_value="1",
        ),
        TuyaBinarySensorEntityDescription(
            key=DPCode.CO_STATUS,
            device_class=BinarySensorDeviceClass.SAFETY,
            on_value="alarm",
        ),
        TAMPER_BINARY_SENSOR,
    ),
    DeviceCategory.CS: (
        TuyaBinarySensorEntityDescription(
            key="tankfull",
            dpcode=DPCode.FAULT,
            device_class=BinarySensorDeviceClass.PROBLEM,
            entity_category=EntityCategory.DIAGNOSTIC,
            bitmap_key="tankfull",
            translation_key="tankfull",
        ),
        TuyaBinarySensorEntityDescription(
            key="defrost",
            dpcode=DPCode.FAULT,
            device_class=BinarySensorDeviceClass.PROBLEM,
            entity_category=EntityCategory.DIAGNOSTIC,
            bitmap_key="defrost",
            translation_key="defrost",
        ),
        TuyaBinarySensorEntityDescription(
            key="wet",
            dpcode=DPCode.FAULT,
            device_class=BinarySensorDeviceClass.PROBLEM,
            entity_category=EntityCategory.DIAGNOSTIC,
            bitmap_key="wet",
            translation_key="wet",
        ),
    ),
    DeviceCategory.CWWSQ: (
        TuyaBinarySensorEntityDescription(
            key=DPCode.FEED_STATE,
            translation_key="feeding",
            on_value="feeding",
        ),
    ),
    DeviceCategory.DGNBJ: (
        TuyaBinarySensorEntityDescription(
            key=DPCode.GAS_SENSOR_STATE,
            device_class=BinarySensorDeviceClass.GAS,
            on_value="alarm",
        ),
        TuyaBinarySensorEntityDescription(
            key=DPCode.CH4_SENSOR_STATE,
            translation_key="methane",
            device_class=BinarySensorDeviceClass.GAS,
            on_value="alarm",
        ),
        TuyaBinarySensorEntityDescription(
            key=DPCode.VOC_STATE,
            translation_key="voc",
            device_class=BinarySensorDeviceClass.SAFETY,
            on_value="alarm",
        ),
        TuyaBinarySensorEntityDescription(
            key=DPCode.PM25_STATE,
            translation_key="pm25",
            device_class=BinarySensorDeviceClass.SAFETY,
            on_value="alarm",
        ),
        TuyaBinarySensorEntityDescription(
            key=DPCode.CO_STATE,
            translation_key="carbon_monoxide",
            device_class=BinarySensorDeviceClass.SAFETY,
            on_value="alarm",
        ),
        TuyaBinarySensorEntityDescription(
            key=DPCode.CO2_STATE,
            translation_key="carbon_dioxide",
            device_class=BinarySensorDeviceClass.SAFETY,
            on_value="alarm",
        ),
        TuyaBinarySensorEntityDescription(
            key=DPCode.CH2O_STATE,
            translation_key="formaldehyde",
            device_class=BinarySensorDeviceClass.SAFETY,
            on_value="alarm",
        ),
        TuyaBinarySensorEntityDescription(
            key=DPCode.DOORCONTACT_STATE,
            device_class=BinarySensorDeviceClass.DOOR,
        ),
        TuyaBinarySensorEntityDescription(
            key=DPCode.WATERSENSOR_STATE,
            device_class=BinarySensorDeviceClass.MOISTURE,
            on_value="alarm",
        ),
        TuyaBinarySensorEntityDescription(
            key=DPCode.PRESSURE_STATE,
            translation_key="pressure",
            on_value="alarm",
        ),
        TuyaBinarySensorEntityDescription(
            key=DPCode.SMOKE_SENSOR_STATE,
            device_class=BinarySensorDeviceClass.SMOKE,
            on_value="alarm",
        ),
        TAMPER_BINARY_SENSOR,
    ),
    DeviceCategory.HPS: (
        TuyaBinarySensorEntityDescription(
            key=DPCode.PRESENCE_STATE,
            device_class=BinarySensorDeviceClass.OCCUPANCY,
            on_value={"presence", "small_move", "large_move", "peaceful"},
        ),
    ),
    DeviceCategory.JQBJ: (
        TuyaBinarySensorEntityDescription(
            key=DPCode.CH2O_STATE,
            device_class=BinarySensorDeviceClass.SAFETY,
            on_value="alarm",
        ),
        TAMPER_BINARY_SENSOR,
    ),
    DeviceCategory.JWBJ: (
        TuyaBinarySensorEntityDescription(
            key=DPCode.CH4_SENSOR_STATE,
            device_class=BinarySensorDeviceClass.GAS,
            on_value="alarm",
        ),
        TAMPER_BINARY_SENSOR,
    ),
    DeviceCategory.LDCG: (
        TuyaBinarySensorEntityDescription(
            key=DPCode.TEMPER_ALARM,
            device_class=BinarySensorDeviceClass.TAMPER,
            entity_category=EntityCategory.DIAGNOSTIC,
        ),
        TAMPER_BINARY_SENSOR,
    ),
    DeviceCategory.MC: (
        TuyaBinarySensorEntityDescription(
            key=DPCode.STATUS,
            device_class=BinarySensorDeviceClass.DOOR,
            on_value={"open", "opened"},
        ),
    ),
    DeviceCategory.MCS: (
        TuyaBinarySensorEntityDescription(
            key=DPCode.DOORCONTACT_STATE,
            device_class=BinarySensorDeviceClass.DOOR,
        ),
        TuyaBinarySensorEntityDescription(
            key=DPCode.SWITCH,  # Used by non-standard contact sensor implementations
            device_class=BinarySensorDeviceClass.DOOR,
        ),
        TAMPER_BINARY_SENSOR,
    ),
    DeviceCategory.MK: (
        TuyaBinarySensorEntityDescription(
            key=DPCode.CLOSED_OPENED_KIT,
            device_class=BinarySensorDeviceClass.LOCK,
            on_value={"AQAB"},
        ),
    ),
    DeviceCategory.PIR: (
        TuyaBinarySensorEntityDescription(
            key=DPCode.PIR,
            device_class=BinarySensorDeviceClass.MOTION,
            on_value="pir",
        ),
        TAMPER_BINARY_SENSOR,
    ),
    DeviceCategory.PM2_5: (
        TuyaBinarySensorEntityDescription(
            key=DPCode.PM25_STATE,
            device_class=BinarySensorDeviceClass.SAFETY,
            on_value="alarm",
        ),
        TAMPER_BINARY_SENSOR,
    ),
    DeviceCategory.QXJ: (TAMPER_BINARY_SENSOR,),
    DeviceCategory.RQBJ: (
        TuyaBinarySensorEntityDescription(
            key=DPCode.GAS_SENSOR_STATUS,
            device_class=BinarySensorDeviceClass.GAS,
            on_value="alarm",
        ),
        TuyaBinarySensorEntityDescription(
            key=DPCode.GAS_SENSOR_STATE,
            device_class=BinarySensorDeviceClass.GAS,
            on_value="1",
        ),
        TAMPER_BINARY_SENSOR,
    ),
    DeviceCategory.SGBJ: (
        TuyaBinarySensorEntityDescription(
            key=DPCode.CHARGE_STATE,
            device_class=BinarySensorDeviceClass.BATTERY_CHARGING,
        ),
        TAMPER_BINARY_SENSOR,
    ),
    DeviceCategory.SJ: (
        TuyaBinarySensorEntityDescription(
            key=DPCode.WATERSENSOR_STATE,
            device_class=BinarySensorDeviceClass.MOISTURE,
            on_value={"1", "alarm"},
        ),
        TAMPER_BINARY_SENSOR,
    ),
    DeviceCategory.SOS: (
        TuyaBinarySensorEntityDescription(
            key=DPCode.SOS_STATE,
            device_class=BinarySensorDeviceClass.SAFETY,
        ),
        TAMPER_BINARY_SENSOR,
    ),
    DeviceCategory.VOC: (
        TuyaBinarySensorEntityDescription(
            key=DPCode.VOC_STATE,
            device_class=BinarySensorDeviceClass.SAFETY,
            on_value="alarm",
        ),
        TAMPER_BINARY_SENSOR,
    ),
    DeviceCategory.WG2: (
        TuyaBinarySensorEntityDescription(
            key=DPCode.MASTER_STATE,
            device_class=BinarySensorDeviceClass.PROBLEM,
            entity_category=EntityCategory.DIAGNOSTIC,
            on_value="alarm",
        ),
    ),
    DeviceCategory.WK: (
        TuyaBinarySensorEntityDescription(
            key=DPCode.VALVE_STATE,
            translation_key="valve",
            on_value="open",
        ),
    ),
    DeviceCategory.WKF: (
        TuyaBinarySensorEntityDescription(
            key=DPCode.WINDOW_STATE,
            device_class=BinarySensorDeviceClass.WINDOW,
            on_value="opened",
        ),
    ),
    DeviceCategory.WSDCG: (TAMPER_BINARY_SENSOR,),
    DeviceCategory.YLCG: (
        TuyaBinarySensorEntityDescription(
            key=DPCode.PRESSURE_STATE,
            on_value="alarm",
        ),
        TAMPER_BINARY_SENSOR,
    ),
    DeviceCategory.YWBJ: (
        TuyaBinarySensorEntityDescription(
            key=DPCode.SMOKE_SENSOR_STATUS,
            device_class=BinarySensorDeviceClass.SMOKE,
            on_value="alarm",
        ),
        TuyaBinarySensorEntityDescription(
            key=DPCode.SMOKE_SENSOR_STATE,
            device_class=BinarySensorDeviceClass.SMOKE,
            on_value={"1", "alarm"},
        ),
        TAMPER_BINARY_SENSOR,
    ),
    DeviceCategory.ZD: (
        TuyaBinarySensorEntityDescription(
            key=f"{DPCode.SHOCK_STATE}_vibration",
            dpcode=DPCode.SHOCK_STATE,
            device_class=BinarySensorDeviceClass.VIBRATION,
            on_value="vibration",
        ),
        TuyaBinarySensorEntityDescription(
            key=f"{DPCode.SHOCK_STATE}_drop",
            dpcode=DPCode.SHOCK_STATE,
            translation_key="drop",
            on_value="drop",
        ),
        TuyaBinarySensorEntityDescription(
            key=f"{DPCode.SHOCK_STATE}_tilt",
            dpcode=DPCode.SHOCK_STATE,
            translation_key="tilt",
            on_value="tilt",
        ),
    ),
}


def _get_bitmap_bit_mask(
    device: CustomerDevice, dpcode: str, bitmap_key: str | None
) -> int | None:
    """Get the bit mask for a given bitmap description."""
    if (
        bitmap_key is None
        or (status_range := device.status_range.get(dpcode)) is None
        or status_range.type != DPType.BITMAP
        or not isinstance(bitmap_values := json_loads(status_range.values), dict)
        or not isinstance(bitmap_labels := bitmap_values.get("label"), list)
        or bitmap_key not in bitmap_labels
    ):
        return None
    return bitmap_labels.index(bitmap_key)


async def async_setup_entry(
    hass: HomeAssistant,
    entry: TuyaConfigEntry,
    async_add_entities: AddConfigEntryEntitiesCallback,
) -> None:
    """Set up Tuya binary sensor dynamically through Tuya discovery."""
    manager = entry.runtime_data.manager

    @callback
    def async_discover_device(device_ids: list[str]) -> None:
        """Discover and add a discovered Tuya binary sensor."""
        entities: list[TuyaBinarySensorEntity] = []
        for device_id in device_ids:
            device = manager.device_map[device_id]
            if descriptions := BINARY_SENSORS.get(device.category):
                for description in descriptions:
                    dpcode = description.dpcode or description.key
                    if dpcode in device.status:
                        mask = _get_bitmap_bit_mask(
                            device, dpcode, description.bitmap_key
                        )

                        if (
                            description.bitmap_key is None  # Regular binary sensor
                            or mask is not None  # Bitmap sensor with valid mask
                        ):
                            entities.append(
                                TuyaBinarySensorEntity(
                                    device,
                                    manager,
                                    description,
                                    mask,
                                )
                            )

        async_add_entities(entities)

    async_discover_device([*manager.device_map])

    entry.async_on_unload(
        async_dispatcher_connect(hass, TUYA_DISCOVERY_NEW, async_discover_device)
    )


class TuyaBinarySensorEntity(TuyaEntity, BinarySensorEntity):
    """Tuya Binary Sensor Entity."""

    entity_description: TuyaBinarySensorEntityDescription

    def __init__(
        self,
        device: CustomerDevice,
        device_manager: Manager,
        description: TuyaBinarySensorEntityDescription,
        bit_mask: int | None = None,
    ) -> None:
        """Init Tuya binary sensor."""
        super().__init__(device, device_manager)
        self.entity_description = description
        self._attr_unique_id = f"{super().unique_id}{description.key}"
        self._bit_mask = bit_mask

    @property
    def is_on(self) -> bool:
        """Return true if sensor is on."""
        dpcode = self.entity_description.dpcode or self.entity_description.key
        if dpcode not in self.device.status:
            return False

        if self._bit_mask is not None:
            # For bitmap sensors, check the specific bit mask
            return (self.device.status[dpcode] & (1 << self._bit_mask)) != 0

        if isinstance(self.entity_description.on_value, set):
            return self.device.status[dpcode] in self.entity_description.on_value

        return self.device.status[dpcode] == self.entity_description.on_value