jeans/esphome
jeans/esphome
1
0
Fork 0
mirror of https://github.com/esphome/esphome.git synced 2025-07-29 06:36:45 +00:00
Code Issues Packages Projects Releases Wiki Activity

[bmp581] Shorten some log messages (#8948)

Browse Source
This commit is contained in:
Keith Burzinski 2025-06-03 15:51:51 -05:00 committed by GitHub
parent 935e0a365f
commit 8054c9b4f5
No known key found for this signature in database
GPG Key ID: B5690EEEBB952194
1 changed files with 22 additions and 22 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

44
esphome/components/bmp581/bmp581.cpp
View File

@ -72,22 +72,22 @@ void BMP581Component::dump_config() {
case NONE:
break;
case ERROR_COMMUNICATION_FAILED:
ESP_LOGE(TAG, " Communication with BMP581 failed!");
ESP_LOGE(TAG, ESP_LOG_MSG_COMM_FAIL);
break;
case ERROR_WRONG_CHIP_ID:
ESP_LOGE(TAG, " BMP581 has wrong chip ID - please verify you are using a BMP 581");
ESP_LOGE(TAG, "Unknown chip ID");
break;
case ERROR_SENSOR_RESET:
ESP_LOGE(TAG, " BMP581 failed to reset");
ESP_LOGE(TAG, "Reset failed");
break;
case ERROR_SENSOR_STATUS:
ESP_LOGE(TAG, " BMP581 sensor status failed, there were NVM problems");
ESP_LOGE(TAG, "Get status failed");
break;
case ERROR_PRIME_IIR_FAILED:
ESP_LOGE(TAG, " BMP581's IIR Filter failed to prime with an initial measurement");
ESP_LOGE(TAG, "IIR Filter failed to prime with initial measurement");
break;
default:
ESP_LOGE(TAG, " BMP581 error code %d", (int) this->error_code_);
ESP_LOGE(TAG, "Error %d", (int) this->error_code_);
break;
}
@ -130,7 +130,7 @@ void BMP581Component::setup() {
// Power-On-Reboot bit is asserted if sensor successfully reset
if (!this->reset_()) {
ESP_LOGE(TAG, "BMP581 failed to reset");
ESP_LOGE(TAG, "Reset failed");
this->error_code_ = ERROR_SENSOR_RESET;
this->mark_failed();
@ -146,7 +146,7 @@ void BMP581Component::setup() {
// read chip id from sensor
if (!this->read_byte(BMP581_CHIP_ID, &chip_id)) {
ESP_LOGE(TAG, "Failed to read chip id");
ESP_LOGE(TAG, "Read chip ID failed");
this->error_code_ = ERROR_COMMUNICATION_FAILED;
this->mark_failed();
@ -156,7 +156,7 @@ void BMP581Component::setup() {
// verify id
if (chip_id != BMP581_ASIC_ID) {
ESP_LOGE(TAG, "Unknown chip ID, is this a BMP581?");
ESP_LOGE(TAG, "Unknown chip ID");
this->error_code_ = ERROR_WRONG_CHIP_ID;
this->mark_failed();
@ -179,7 +179,7 @@ void BMP581Component::setup() {
// verify status_nvm_rdy bit (it is asserted if boot was successful)
if (!(this->status_.bit.status_nvm_rdy)) {
ESP_LOGE(TAG, "NVM not ready after boot");
ESP_LOGE(TAG, "NVM not ready");
this->error_code_ = ERROR_SENSOR_STATUS;
this->mark_failed();
@ -189,7 +189,7 @@ void BMP581Component::setup() {
// verify status_nvm_err bit (it is asserted if an error is detected)
if (this->status_.bit.status_nvm_err) {
ESP_LOGE(TAG, "NVM error detected on boot");
ESP_LOGE(TAG, "NVM error detected");
this->error_code_ = ERROR_SENSOR_STATUS;
this->mark_failed();
@ -254,7 +254,7 @@ void BMP581Component::setup() {
}
if (!this->prime_iir_filter_()) {
ESP_LOGE(TAG, "Failed to prime the IIR filter with an intiial measurement");
ESP_LOGE(TAG, "Failed to prime the IIR filter with an initial measurement");
this->error_code_ = ERROR_PRIME_IIR_FAILED;
this->mark_failed();
@ -286,10 +286,10 @@ void BMP581Component::update() {
// 1) Request a measurement //
//////////////////////////////
ESP_LOGVV(TAG, "Requesting a measurement from sensor");
ESP_LOGVV(TAG, "Requesting measurement");
if (!this->start_measurement_()) {
ESP_LOGW(TAG, "Failed to request forced measurement of sensor");
ESP_LOGW(TAG, "Requesting forced measurement failed");
this->status_set_warning();
return;
@ -299,7 +299,7 @@ void BMP581Component::update() {
// 2) Wait for measurement to finish (based on oversampling rates) //
//////////////////////////////////////////////////////////////////////
ESP_LOGVV(TAG, "Measurement is expected to take %d ms to complete", this->conversion_time_);
ESP_LOGVV(TAG, "Measurement should take %d ms", this->conversion_time_);
this->set_timeout("measurement", this->conversion_time_, [this]() {
float temperature = 0.0;
@ -311,14 +311,14 @@ void BMP581Component::update() {
if (this->pressure_sensor_) {
if (!this->read_temperature_and_pressure_(temperature, pressure)) {
ESP_LOGW(TAG, "Failed to read temperature and pressure measurements, skipping update");
ESP_LOGW(TAG, "Failed to read temperature and pressure; skipping update");
this->status_set_warning();
return;
}
} else {
if (!this->read_temperature_(temperature)) {
ESP_LOGW(TAG, "Failed to read temperature measurement, skipping update");
ESP_LOGW(TAG, "Failed to read temperature; skipping update");
this->status_set_warning();
return;
@ -349,7 +349,7 @@ bool BMP581Component::check_data_readiness_() {
// - returns data readiness state
if (this->odr_config_.bit.pwr_mode == STANDBY_MODE) {
ESP_LOGD(TAG, "Data is not ready, sensor is in standby mode");
ESP_LOGD(TAG, "Data not ready, sensor is in standby mode");
return false;
}
@ -443,7 +443,7 @@ bool BMP581Component::read_temperature_(float &temperature) {
// - the measured temperature (in degrees Celsius)
if (!this->check_data_readiness_()) {
ESP_LOGW(TAG, "Data from sensor isn't ready, skipping this update");
ESP_LOGW(TAG, "Data not ready, skipping this update");
this->status_set_warning();
return false;
@ -451,7 +451,7 @@ bool BMP581Component::read_temperature_(float &temperature) {
uint8_t data[3];
if (!this->read_bytes(BMP581_MEASUREMENT_DATA, &data[0], 3)) {
ESP_LOGW(TAG, "Failed to read sensor's measurement data");
ESP_LOGW(TAG, "Failed to read measurement");
this->status_set_warning();
return false;
@ -472,7 +472,7 @@ bool BMP581Component::read_temperature_and_pressure_(float &temperature, float &
// - the measured pressure (in Pa)
if (!this->check_data_readiness_()) {
ESP_LOGW(TAG, "Data from sensor isn't ready, skipping this update");
ESP_LOGW(TAG, "Data not ready, skipping this update");
this->status_set_warning();
return false;
@ -480,7 +480,7 @@ bool BMP581Component::read_temperature_and_pressure_(float &temperature, float &
uint8_t data[6];
if (!this->read_bytes(BMP581_MEASUREMENT_DATA, &data[0], 6)) {
ESP_LOGW(TAG, "Failed to read sensor's measurement data");
ESP_LOGW(TAG, "Failed to read measurement");
this->status_set_warning();
return false;