From 8cb689b58c4fa6279bcc765f93f86510ec940289 Mon Sep 17 00:00:00 2001 From: RubyBailey <60991881+RubyBailey@users.noreply.github.com> Date: Mon, 11 Mar 2024 14:01:05 -0700 Subject: [PATCH] Mitsubishi Climate updates (#3886) Co-authored-by: Blair McBride Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com> Co-authored-by: RubyBailey Co-authored-by: X-Ryl669 Co-authored-by: OlympusMonds --- esphome/components/mitsubishi/climate.py | 52 ++- esphome/components/mitsubishi/mitsubishi.cpp | 335 ++++++++++++++++++- esphome/components/mitsubishi/mitsubishi.h | 63 +++- tests/test1.yaml | 4 + 4 files changed, 436 insertions(+), 18 deletions(-) diff --git a/esphome/components/mitsubishi/climate.py b/esphome/components/mitsubishi/climate.py index 0df17a5d16..5e865c636f 100644 --- a/esphome/components/mitsubishi/climate.py +++ b/esphome/components/mitsubishi/climate.py @@ -9,9 +9,53 @@ AUTO_LOAD = ["climate_ir"] mitsubishi_ns = cg.esphome_ns.namespace("mitsubishi") MitsubishiClimate = mitsubishi_ns.class_("MitsubishiClimate", climate_ir.ClimateIR) -CONFIG_SCHEMA = climate_ir.CLIMATE_IR_SCHEMA.extend( +CONF_SET_FAN_MODE = "set_fan_mode" +SetFanMode = mitsubishi_ns.enum("SetFanMode") +SETFANMODE = { + "quiet_4levels": SetFanMode.MITSUBISHI_FAN_Q4L, + # "5levels": SetFanMode.MITSUBISHI_FAN_5L, + "4levels": SetFanMode.MITSUBISHI_FAN_4L, + "3levels": SetFanMode.MITSUBISHI_FAN_3L, +} + +CONF_SUPPORTS_DRY = "supports_dry" +CONF_SUPPORTS_FAN_ONLY = "supports_fan_only" + +CONF_HORIZONTAL_DEFAULT = "horizontal_default" +HorizontalDirections = mitsubishi_ns.enum("HorizontalDirections") +HORIZONTAL_DIRECTIONS = { + "left": HorizontalDirections.HORIZONTAL_DIRECTION_LEFT, + "middle-left": HorizontalDirections.HORIZONTAL_DIRECTION_MIDDLE_LEFT, + "middle": HorizontalDirections.HORIZONTAL_DIRECTION_MIDDLE, + "middle-right": HorizontalDirections.HORIZONTAL_DIRECTION_MIDDLE_RIGHT, + "right": HorizontalDirections.HORIZONTAL_DIRECTION_RIGHT, + "split": HorizontalDirections.HORIZONTAL_DIRECTION_SPLIT, +} + +CONF_VERTICAL_DEFAULT = "vertical_default" +VerticalDirections = mitsubishi_ns.enum("VerticalDirections") +VERTICAL_DIRECTIONS = { + "auto": VerticalDirections.VERTICAL_DIRECTION_AUTO, + "up": VerticalDirections.VERTICAL_DIRECTION_UP, + "middle-up": VerticalDirections.VERTICAL_DIRECTION_MIDDLE_UP, + "middle": VerticalDirections.VERTICAL_DIRECTION_MIDDLE, + "middle-down": VerticalDirections.VERTICAL_DIRECTION_MIDDLE_DOWN, + "down": VerticalDirections.VERTICAL_DIRECTION_DOWN, +} + + +CONFIG_SCHEMA = climate_ir.CLIMATE_IR_WITH_RECEIVER_SCHEMA.extend( { cv.GenerateID(): cv.declare_id(MitsubishiClimate), + cv.Optional(CONF_SET_FAN_MODE, default="3levels"): cv.enum(SETFANMODE), + cv.Optional(CONF_SUPPORTS_DRY, default=False): cv.boolean, + cv.Optional(CONF_SUPPORTS_FAN_ONLY, default=False): cv.boolean, + cv.Optional(CONF_HORIZONTAL_DEFAULT, default="middle"): cv.enum( + HORIZONTAL_DIRECTIONS + ), + cv.Optional(CONF_VERTICAL_DEFAULT, default="middle"): cv.enum( + VERTICAL_DIRECTIONS + ), } ) @@ -19,3 +63,9 @@ CONFIG_SCHEMA = climate_ir.CLIMATE_IR_SCHEMA.extend( async def to_code(config): var = cg.new_Pvariable(config[CONF_ID]) await climate_ir.register_climate_ir(var, config) + + cg.add(var.set_fan_mode(config[CONF_SET_FAN_MODE])) + cg.add(var.set_supports_dry(config[CONF_SUPPORTS_DRY])) + cg.add(var.set_supports_fan_only(config[CONF_SUPPORTS_FAN_ONLY])) + cg.add(var.set_horizontal_default(config[CONF_HORIZONTAL_DEFAULT])) + cg.add(var.set_vertical_default(config[CONF_VERTICAL_DEFAULT])) diff --git a/esphome/components/mitsubishi/mitsubishi.cpp b/esphome/components/mitsubishi/mitsubishi.cpp index 87b78128e4..081c24a050 100644 --- a/esphome/components/mitsubishi/mitsubishi.cpp +++ b/esphome/components/mitsubishi/mitsubishi.cpp @@ -8,12 +8,31 @@ static const char *const TAG = "mitsubishi.climate"; const uint32_t MITSUBISHI_OFF = 0x00; -const uint8_t MITSUBISHI_COOL = 0x18; -const uint8_t MITSUBISHI_DRY = 0x10; -const uint8_t MITSUBISHI_AUTO = 0x20; -const uint8_t MITSUBISHI_HEAT = 0x08; +const uint8_t MITSUBISHI_MODE_AUTO = 0x20; +const uint8_t MITSUBISHI_MODE_COOL = 0x18; +const uint8_t MITSUBISHI_MODE_DRY = 0x10; +const uint8_t MITSUBISHI_MODE_FAN_ONLY = 0x38; +const uint8_t MITSUBISHI_MODE_HEAT = 0x08; + +const uint8_t MITSUBISHI_MODE_A_HEAT = 0x00; +const uint8_t MITSUBISHI_MODE_A_DRY = 0x02; +const uint8_t MITSUBISHI_MODE_A_COOL = 0x06; +const uint8_t MITSUBISHI_MODE_A_AUTO = 0x06; + +const uint8_t MITSUBISHI_WIDE_VANE_SWING = 0xC0; + const uint8_t MITSUBISHI_FAN_AUTO = 0x00; +const uint8_t MITSUBISHI_VERTICAL_VANE_SWING = 0x38; + +// const uint8_t MITSUBISHI_AUTO = 0X80; +const uint8_t MITSUBISHI_OTHERWISE = 0X40; +const uint8_t MITSUBISHI_POWERFUL = 0x08; + +// Optional presets used to enable some model features +const uint8_t MITSUBISHI_ECONOCOOL = 0x20; +const uint8_t MITSUBISHI_NIGHTMODE = 0xC1; + // Pulse parameters in usec const uint16_t MITSUBISHI_BIT_MARK = 430; const uint16_t MITSUBISHI_ONE_SPACE = 1250; @@ -22,19 +41,97 @@ const uint16_t MITSUBISHI_HEADER_MARK = 3500; const uint16_t MITSUBISHI_HEADER_SPACE = 1700; const uint16_t MITSUBISHI_MIN_GAP = 17500; +// Marker bytes +const uint8_t MITSUBISHI_BYTE00 = 0X23; +const uint8_t MITSUBISHI_BYTE01 = 0XCB; +const uint8_t MITSUBISHI_BYTE02 = 0X26; +const uint8_t MITSUBISHI_BYTE03 = 0X01; +const uint8_t MITSUBISHI_BYTE04 = 0X00; +const uint8_t MITSUBISHI_BYTE13 = 0X00; +const uint8_t MITSUBISHI_BYTE16 = 0X00; + +climate::ClimateTraits MitsubishiClimate::traits() { + auto traits = climate::ClimateTraits(); + traits.set_supports_action(false); + traits.set_visual_min_temperature(MITSUBISHI_TEMP_MIN); + traits.set_visual_max_temperature(MITSUBISHI_TEMP_MAX); + traits.set_visual_temperature_step(1.0f); + traits.set_supported_modes({climate::CLIMATE_MODE_OFF}); + + if (this->supports_cool_) + traits.add_supported_mode(climate::CLIMATE_MODE_COOL); + if (this->supports_heat_) + traits.add_supported_mode(climate::CLIMATE_MODE_HEAT); + + if (this->supports_cool_ && this->supports_heat_) + traits.add_supported_mode(climate::CLIMATE_MODE_HEAT_COOL); + + if (this->supports_dry_) + traits.add_supported_mode(climate::CLIMATE_MODE_DRY); + if (this->supports_fan_only_) + traits.add_supported_mode(climate::CLIMATE_MODE_FAN_ONLY); + + // Default to only 3 levels in ESPHome even if most unit supports 4. The 3rd level is not used. + traits.set_supported_fan_modes( + {climate::CLIMATE_FAN_AUTO, climate::CLIMATE_FAN_LOW, climate::CLIMATE_FAN_MEDIUM, climate::CLIMATE_FAN_HIGH}); + if (this->fan_mode_ == MITSUBISHI_FAN_Q4L) + traits.add_supported_fan_mode(climate::CLIMATE_FAN_QUIET); + if (/*this->fan_mode_ == MITSUBISHI_FAN_5L ||*/ this->fan_mode_ >= MITSUBISHI_FAN_4L) + traits.add_supported_fan_mode(climate::CLIMATE_FAN_MIDDLE); // Shouldn't be used for this but it helps + + traits.set_supported_swing_modes({climate::CLIMATE_SWING_OFF, climate::CLIMATE_SWING_BOTH, + climate::CLIMATE_SWING_VERTICAL, climate::CLIMATE_SWING_HORIZONTAL}); + + traits.set_supported_presets({climate::CLIMATE_PRESET_NONE, climate::CLIMATE_PRESET_ECO, + climate::CLIMATE_PRESET_BOOST, climate::CLIMATE_PRESET_SLEEP}); + + return traits; +} + void MitsubishiClimate::transmit_state() { - uint32_t remote_state[18] = {0x23, 0xCB, 0x26, 0x01, 0x00, 0x20, 0x08, 0x00, 0x30, - 0x58, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}; + // Byte 0-4: Constant: 0x23, 0xCB, 0x26, 0x01, 0x00 + // Byte 5: On=0x20, Off: 0x00 + // Byte 6: MODE (See MODEs above (Heat/Dry/Cool/Auto/FanOnly) + // Byte 7: TEMP bits 0,1,2,3, added to MITSUBISHI_TEMP_MIN + // Example: 0x00 = 0°C+MITSUBISHI_TEMP_MIN = 16°C; 0x07 = 7°C+MITSUBISHI_TEMP_MIN = 23°C + // Byte 8: MODE_A & Wide Vane (if present) + // MODE_A bits 0,1,2 different than Byte 6 (See MODE_As above) + // Wide Vane bits 4,5,6,7 (Middle = 0x30) + // Byte 9: FAN/Vertical Vane/Switch To Auto + // FAN (Speed) bits 0,1,2 + // Vertical Vane bits 3,4,5 (Auto = 0x00) + // Switch To Auto bits 6,7 + // Byte 10: CLOCK Current time as configured on remote (0x00=Not used) + // Byte 11: END CLOCK Stop time of HVAC (0x00 for no setting) + // Byte 12: START CLOCK Start time of HVAC (0x00 for no setting) + // Byte 13: Constant 0x00 + // Byte 14: HVAC specfic, i.e. ECONO COOL, CLEAN MODE, always 0x00 + // Byte 15: HVAC specfic, i.e. POWERFUL, SMART SET, PLASMA, always 0x00 + // Byte 16: Constant 0x00 + // Byte 17: Checksum: SUM[Byte0...Byte16] + uint32_t remote_state[18] = {0x23, 0xCB, 0x26, 0x01, 0x00, 0x20, 0x08, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}; switch (this->mode) { - case climate::CLIMATE_MODE_COOL: - remote_state[6] = MITSUBISHI_COOL; - break; case climate::CLIMATE_MODE_HEAT: - remote_state[6] = MITSUBISHI_HEAT; + remote_state[6] = MITSUBISHI_MODE_HEAT; + remote_state[8] = MITSUBISHI_MODE_A_HEAT; + break; + case climate::CLIMATE_MODE_DRY: + remote_state[6] = MITSUBISHI_MODE_DRY; + remote_state[8] = MITSUBISHI_MODE_A_DRY; + break; + case climate::CLIMATE_MODE_COOL: + remote_state[6] = MITSUBISHI_MODE_COOL; + remote_state[8] = MITSUBISHI_MODE_A_COOL; break; case climate::CLIMATE_MODE_HEAT_COOL: - remote_state[6] = MITSUBISHI_AUTO; + remote_state[6] = MITSUBISHI_MODE_AUTO; + remote_state[8] = MITSUBISHI_MODE_A_AUTO; + break; + case climate::CLIMATE_MODE_FAN_ONLY: + remote_state[6] = MITSUBISHI_MODE_FAN_ONLY; + remote_state[8] = MITSUBISHI_MODE_A_AUTO; break; case climate::CLIMATE_MODE_OFF: default: @@ -42,17 +139,111 @@ void MitsubishiClimate::transmit_state() { break; } - remote_state[7] = (uint8_t) roundf(clamp(this->target_temperature, MITSUBISHI_TEMP_MIN, MITSUBISHI_TEMP_MAX) - - MITSUBISHI_TEMP_MIN); + // Temperature + if (this->mode == climate::CLIMATE_MODE_DRY) { + remote_state[7] = 24 - MITSUBISHI_TEMP_MIN; // Remote sends always 24°C if "Dry" mode is selected + } else { + remote_state[7] = (uint8_t) roundf( + clamp(this->target_temperature, MITSUBISHI_TEMP_MIN, MITSUBISHI_TEMP_MAX) - MITSUBISHI_TEMP_MIN); + } - ESP_LOGV(TAG, "Sending Mitsubishi target temp: %.1f state: %02" PRIX32 " mode: %02" PRIX32 " temp: %02" PRIX32, - this->target_temperature, remote_state[5], remote_state[6], remote_state[7]); + // Wide Vane + switch (this->swing_mode) { + case climate::CLIMATE_SWING_HORIZONTAL: + case climate::CLIMATE_SWING_BOTH: + remote_state[8] = remote_state[8] | MITSUBISHI_WIDE_VANE_SWING; // Wide Vane Swing + break; + case climate::CLIMATE_SWING_OFF: + default: + remote_state[8] = remote_state[8] | this->default_horizontal_direction_; // Off--> horizontal default position + break; + } + + ESP_LOGD(TAG, "default_horizontal_direction_: %02X", this->default_horizontal_direction_); + + // Fan Speed & Vertical Vane + // Map of Climate fan mode to this device expected value + // For 3Level: Low = 1, Medium = 2, High = 3 + // For 4Level: Low = 1, Middle = 2, Medium = 3, High = 4 + // For 5Level: Low = 1, Middle = 2, Medium = 3, High = 4 + // For 4Level + Quiet: Low = 1, Middle = 2, Medium = 3, High = 4, Quiet = 5 + + switch (this->fan_mode.value()) { + case climate::CLIMATE_FAN_LOW: + remote_state[9] = 1; + break; + case climate::CLIMATE_FAN_MEDIUM: + if (this->fan_mode_ == MITSUBISHI_FAN_3L) { + remote_state[9] = 2; + } else { + remote_state[9] = 3; + } + break; + case climate::CLIMATE_FAN_HIGH: + if (this->fan_mode_ == MITSUBISHI_FAN_3L) { + remote_state[9] = 3; + } else { + remote_state[9] = 4; + } + break; + case climate::CLIMATE_FAN_MIDDLE: + remote_state[9] = 2; + break; + case climate::CLIMATE_FAN_QUIET: + remote_state[9] = 5; + break; + default: + remote_state[9] = MITSUBISHI_FAN_AUTO; + break; + } + + ESP_LOGD(TAG, "fan: %02x state: %02x", this->fan_mode.value(), remote_state[9]); + + // Vertical Vane + switch (this->swing_mode) { + case climate::CLIMATE_SWING_VERTICAL: + case climate::CLIMATE_SWING_BOTH: + remote_state[9] = remote_state[9] | MITSUBISHI_VERTICAL_VANE_SWING | MITSUBISHI_OTHERWISE; // Vane Swing + break; + case climate::CLIMATE_SWING_OFF: + default: + remote_state[9] = remote_state[9] | this->default_vertical_direction_ | + MITSUBISHI_OTHERWISE; // Off--> vertical default position + break; + } + + ESP_LOGD(TAG, "default_vertical_direction_: %02X", this->default_vertical_direction_); + + // Special modes + switch (this->preset.value()) { + case climate::CLIMATE_PRESET_ECO: + remote_state[6] = MITSUBISHI_MODE_COOL | MITSUBISHI_OTHERWISE; + remote_state[8] = (remote_state[8] & ~7) | MITSUBISHI_MODE_A_COOL; + remote_state[14] = MITSUBISHI_ECONOCOOL; + break; + case climate::CLIMATE_PRESET_SLEEP: + remote_state[9] = MITSUBISHI_FAN_AUTO; + remote_state[14] = MITSUBISHI_NIGHTMODE; + break; + case climate::CLIMATE_PRESET_BOOST: + remote_state[6] |= MITSUBISHI_OTHERWISE; + remote_state[15] = MITSUBISHI_POWERFUL; + break; + case climate::CLIMATE_PRESET_NONE: + default: + break; + } // Checksum for (int i = 0; i < 17; i++) { remote_state[17] += remote_state[i]; } + ESP_LOGD(TAG, "sending: %02X,%02X,%02X,%02X,%02X,%02X,%02X,%02X,%02X,%02X,%02X,%02X,%02X,%02X,%02X,%02X,%02X,%02X", + remote_state[0], remote_state[1], remote_state[2], remote_state[3], remote_state[4], remote_state[5], + remote_state[6], remote_state[7], remote_state[8], remote_state[9], remote_state[10], remote_state[11], + remote_state[12], remote_state[13], remote_state[14], remote_state[15], remote_state[16], remote_state[17]); + auto transmit = this->transmitter_->transmit(); auto *data = transmit.get_data(); @@ -81,5 +272,119 @@ void MitsubishiClimate::transmit_state() { transmit.perform(); } +bool MitsubishiClimate::parse_state_frame_(const uint8_t frame[]) { return false; } + +bool MitsubishiClimate::on_receive(remote_base::RemoteReceiveData data) { + uint8_t state_frame[18] = {}; + + if (!data.expect_item(MITSUBISHI_HEADER_MARK, MITSUBISHI_HEADER_SPACE)) { + ESP_LOGV(TAG, "Header fail"); + return false; + } + + for (uint8_t pos = 0; pos < 18; pos++) { + uint8_t byte = 0; + for (int8_t bit = 0; bit < 8; bit++) { + if (data.expect_item(MITSUBISHI_BIT_MARK, MITSUBISHI_ONE_SPACE)) { + byte |= 1 << bit; + } else if (!data.expect_item(MITSUBISHI_BIT_MARK, MITSUBISHI_ZERO_SPACE)) { + ESP_LOGV(TAG, "Byte %d bit %d fail", pos, bit); + return false; + } + } + state_frame[pos] = byte; + + // Check Header && Footer + if ((pos == 0 && byte != MITSUBISHI_BYTE00) || (pos == 1 && byte != MITSUBISHI_BYTE01) || + (pos == 2 && byte != MITSUBISHI_BYTE02) || (pos == 3 && byte != MITSUBISHI_BYTE03) || + (pos == 4 && byte != MITSUBISHI_BYTE04) || (pos == 13 && byte != MITSUBISHI_BYTE13) || + (pos == 16 && byte != MITSUBISHI_BYTE16)) { + ESP_LOGV(TAG, "Bytes 0,1,2,3,4,13 or 16 fail - invalid value"); + return false; + } + } + + // On/Off and Mode + if (state_frame[5] == MITSUBISHI_OFF) { + this->mode = climate::CLIMATE_MODE_OFF; + } else { + switch (state_frame[6]) { + case MITSUBISHI_MODE_HEAT: + this->mode = climate::CLIMATE_MODE_HEAT; + break; + case MITSUBISHI_MODE_DRY: + this->mode = climate::CLIMATE_MODE_DRY; + break; + case MITSUBISHI_MODE_COOL: + this->mode = climate::CLIMATE_MODE_COOL; + break; + case MITSUBISHI_MODE_FAN_ONLY: + this->mode = climate::CLIMATE_MODE_FAN_ONLY; + break; + case MITSUBISHI_MODE_AUTO: + this->mode = climate::CLIMATE_MODE_HEAT_COOL; + break; + } + } + + // Temp + this->target_temperature = state_frame[7] + MITSUBISHI_TEMP_MIN; + + // Fan + uint8_t fan = state_frame[9] & 0x07; //(Bit 0,1,2 = Speed) + // Map of Climate fan mode to this device expected value + // For 3Level: Low = 1, Medium = 2, High = 3 + // For 4Level: Low = 1, Middle = 2, Medium = 3, High = 4 + // For 5Level: Low = 1, Middle = 2, Medium = 3, High = 4 + // For 4Level + Quiet: Low = 1, Middle = 2, Medium = 3, High = 4, Quiet = 5 + climate::ClimateFanMode modes_mapping[8] = { + climate::CLIMATE_FAN_AUTO, + climate::CLIMATE_FAN_LOW, + this->fan_mode_ == MITSUBISHI_FAN_3L ? climate::CLIMATE_FAN_MEDIUM : climate::CLIMATE_FAN_MIDDLE, + this->fan_mode_ == MITSUBISHI_FAN_3L ? climate::CLIMATE_FAN_HIGH : climate::CLIMATE_FAN_MEDIUM, + climate::CLIMATE_FAN_HIGH, + climate::CLIMATE_FAN_QUIET, + climate::CLIMATE_FAN_AUTO, + climate::CLIMATE_FAN_AUTO}; + this->fan_mode = modes_mapping[fan]; + + // Wide Vane + uint8_t wide_vane = state_frame[8] & 0xF0; // Bits 4,5,6,7 + switch (wide_vane) { + case MITSUBISHI_WIDE_VANE_SWING: + this->swing_mode = climate::CLIMATE_SWING_HORIZONTAL; + break; + default: + this->swing_mode = climate::CLIMATE_SWING_OFF; + break; + } + + // Vertical Vane + uint8_t vertical_vane = state_frame[9] & 0x38; // Bits 3,4,5 + switch (vertical_vane) { + case MITSUBISHI_VERTICAL_VANE_SWING: + if (this->swing_mode == climate::CLIMATE_SWING_HORIZONTAL) { + this->swing_mode = climate::CLIMATE_SWING_BOTH; + } else { + this->swing_mode = climate::CLIMATE_SWING_VERTICAL; + } + break; + } + + switch (state_frame[14]) { + case MITSUBISHI_ECONOCOOL: + this->preset = climate::CLIMATE_PRESET_ECO; + break; + case MITSUBISHI_NIGHTMODE: + this->preset = climate::CLIMATE_PRESET_SLEEP; + break; + } + + ESP_LOGV(TAG, "Receiving: %s", format_hex_pretty(state_frame, 18).c_str()); + + this->publish_state(); + return true; +} + } // namespace mitsubishi } // namespace esphome diff --git a/esphome/components/mitsubishi/mitsubishi.h b/esphome/components/mitsubishi/mitsubishi.h index 9a88040d3f..cfe12428da 100644 --- a/esphome/components/mitsubishi/mitsubishi.h +++ b/esphome/components/mitsubishi/mitsubishi.h @@ -11,13 +11,72 @@ namespace mitsubishi { const uint8_t MITSUBISHI_TEMP_MIN = 16; // Celsius const uint8_t MITSUBISHI_TEMP_MAX = 31; // Celsius +// Fan mode +enum SetFanMode { + MITSUBISHI_FAN_3L = 0, // 3 levels + auto + MITSUBISHI_FAN_4L, // 4 levels + auto + MITSUBISHI_FAN_Q4L, // Quiet + 4 levels + auto + // MITSUBISHI_FAN_5L, // 5 levels + auto +}; + +// Enum to represent horizontal directios +enum HorizontalDirection { + HORIZONTAL_DIRECTION_LEFT = 0x10, + HORIZONTAL_DIRECTION_MIDDLE_LEFT = 0x20, + HORIZONTAL_DIRECTION_MIDDLE = 0x30, + HORIZONTAL_DIRECTION_MIDDLE_RIGHT = 0x40, + HORIZONTAL_DIRECTION_RIGHT = 0x50, + HORIZONTAL_DIRECTION_SPLIT = 0x80, +}; + +// Enum to represent vertical directions +enum VerticalDirection { + VERTICAL_DIRECTION_AUTO = 0x00, + VERTICAL_DIRECTION_UP = 0x08, + VERTICAL_DIRECTION_MIDDLE_UP = 0x10, + VERTICAL_DIRECTION_MIDDLE = 0x18, + VERTICAL_DIRECTION_MIDDLE_DOWN = 0x20, + VERTICAL_DIRECTION_DOWN = 0x28, +}; + class MitsubishiClimate : public climate_ir::ClimateIR { public: - MitsubishiClimate() : climate_ir::ClimateIR(MITSUBISHI_TEMP_MIN, MITSUBISHI_TEMP_MAX) {} + MitsubishiClimate() + : climate_ir::ClimateIR(MITSUBISHI_TEMP_MIN, MITSUBISHI_TEMP_MAX, 1.0f, true, true, + {climate::CLIMATE_FAN_AUTO, climate::CLIMATE_FAN_LOW, climate::CLIMATE_FAN_MIDDLE, + climate::CLIMATE_FAN_MEDIUM, climate::CLIMATE_FAN_HIGH, climate::CLIMATE_FAN_QUIET}, + {climate::CLIMATE_SWING_OFF, climate::CLIMATE_SWING_BOTH, climate::CLIMATE_SWING_VERTICAL, + climate::CLIMATE_SWING_HORIZONTAL}, + {climate::CLIMATE_PRESET_NONE, climate::CLIMATE_PRESET_ECO, climate::CLIMATE_PRESET_BOOST, + climate::CLIMATE_PRESET_SLEEP}) {} + + void set_supports_cool(bool supports_cool) { this->supports_cool_ = supports_cool; } + void set_supports_dry(bool supports_dry) { this->supports_dry_ = supports_dry; } + void set_supports_fan_only(bool supports_fan_only) { this->supports_fan_only_ = supports_fan_only; } + void set_supports_heat(bool supports_heat) { this->supports_heat_ = supports_heat; } + + void set_fan_mode(SetFanMode fan_mode) { this->fan_mode_ = fan_mode; } + + void set_horizontal_default(HorizontalDirection horizontal_direction) { + this->default_horizontal_direction_ = horizontal_direction; + } + void set_vertical_default(VerticalDirection vertical_direction) { + this->default_vertical_direction_ = vertical_direction; + } protected: - /// Transmit via IR the state of this climate controller. + // Transmit via IR the state of this climate controller. void transmit_state() override; + // Handle received IR Buffer + bool on_receive(remote_base::RemoteReceiveData data) override; + bool parse_state_frame_(const uint8_t frame[]); + + SetFanMode fan_mode_; + + HorizontalDirection default_horizontal_direction_; + VerticalDirection default_vertical_direction_; + + climate::ClimateTraits traits() override; }; } // namespace mitsubishi diff --git a/tests/test1.yaml b/tests/test1.yaml index 505e839f5b..c8ae9691c2 100644 --- a/tests/test1.yaml +++ b/tests/test1.yaml @@ -2652,6 +2652,10 @@ climate: name: Yashima Climate - platform: mitsubishi name: Mitsubishi + supports_dry: "true" + supports_fan_only: "true" + horizontal_default: "left" + vertical_default: "down" - platform: whirlpool name: Whirlpool Climate - platform: climate_ir_lg