Streamline setup() logging (k, l, m) (#8928)

esphome/components/kmeteriso/kmeteriso.cpp

@@ -13,7 +13,7 @@ static const uint8_t KMETER_INTERNAL_TEMP_VAL_REG = 0x10;
 static const uint8_t KMETER_FIRMWARE_VERSION_REG = 0xFE;
 
 void KMeterISOComponent::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up KMeterISO...");
+  ESP_LOGCONFIG(TAG, "Running setup");
   this->error_code_ = NONE;
 
   // Mark as not failed before initializing. Some devices will turn off sensors to save on batteries

esphome/components/lcd_gpio/gpio_lcd_display.cpp

@@ -7,7 +7,7 @@ namespace lcd_gpio {
 static const char *const TAG = "lcd_gpio";
 
 void GPIOLCDDisplay::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up GPIO LCD Display...");
+  ESP_LOGCONFIG(TAG, "Running setup");
   this->rs_pin_->setup();  // OUTPUT
   this->rs_pin_->digital_write(false);
   if (this->rw_pin_ != nullptr) {

esphome/components/lcd_pcf8574/pcf8574_display.cpp

@@ -11,7 +11,7 @@ static const uint8_t LCD_DISPLAY_BACKLIGHT_ON = 0x08;
 static const uint8_t LCD_DISPLAY_BACKLIGHT_OFF = 0x00;
 
 void PCF8574LCDDisplay::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up PCF8574 LCD Display...");
+  ESP_LOGCONFIG(TAG, "Running setup");
   this->backlight_value_ = LCD_DISPLAY_BACKLIGHT_ON;
   if (!this->write_bytes(this->backlight_value_, nullptr, 0)) {
     this->mark_failed();

esphome/components/ld2410/ld2410.cpp

@@ -78,11 +78,8 @@ void LD2410Component::dump_config() {
 }
 
 void LD2410Component::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up LD2410...");
+  ESP_LOGCONFIG(TAG, "Running setup");
   this->read_all_info();
-  ESP_LOGCONFIG(TAG, "Mac Address : %s", const_cast<char *>(this->mac_.c_str()));
-  ESP_LOGCONFIG(TAG, "Firmware Version : %s", const_cast<char *>(this->version_.c_str()));
-  ESP_LOGCONFIG(TAG, "LD2410 setup complete.");
 }
 
 void LD2410Component::read_all_info() {

esphome/components/ld2420/ld2420.cpp

@@ -111,7 +111,7 @@ int LD2420Component::get_firmware_int_(const char *version_string) {
 }
 
 void LD2420Component::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up LD2420...");
+  ESP_LOGCONFIG(TAG, "Running setup");
   if (this->set_config_mode(true) == LD2420_ERROR_TIMEOUT) {
     ESP_LOGE(TAG, "LD2420 module has failed to respond, check baud rate and serial connections.");
     this->mark_failed();

esphome/components/ld2450/ld2450.cpp

@@ -109,7 +109,7 @@ static inline std::string format_version(uint8_t *buffer) {
 LD2450Component::LD2450Component() {}
 
 void LD2450Component::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up HLK-LD2450...");
+  ESP_LOGCONFIG(TAG, "Running setup");
 #ifdef USE_NUMBER
   if (this->presence_timeout_number_ != nullptr) {
     this->pref_ = global_preferences->make_preference<float>(this->presence_timeout_number_->get_object_id_hash());

esphome/components/light/light_state.cpp

@@ -18,7 +18,7 @@ LightCall LightState::toggle() { return this->make_call().set_state(!this->remot
 LightCall LightState::make_call() { return LightCall(this); }
 
 void LightState::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up light '%s'...", this->get_name().c_str());
+  ESP_LOGCONFIG(TAG, "Running setup for '%s'", this->get_name().c_str());
 
   this->output_->setup_state(this);
   for (auto *effect : this->effects_) {

esphome/components/lightwaverf/lightwaverf.cpp

@@ -14,7 +14,7 @@ static const bool DEFAULT_INVERT = false;
 static const uint32_t DEFAULT_TICK = 330;
 
 void LightWaveRF::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up Lightwave RF...");
+  ESP_LOGCONFIG(TAG, "Running setup");
 
   this->lwtx_.lwtx_setup(pin_tx_, DEFAULT_REPEAT, DEFAULT_INVERT, DEFAULT_TICK);
   this->lwrx_.lwrx_setup(pin_rx_);

esphome/components/lilygo_t5_47/touchscreen/lilygo_t5_47_touchscreen.cpp

@@ -24,7 +24,7 @@ static const uint8_t READ_TOUCH[1] = {0x07};
   }
 
 void LilygoT547Touchscreen::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up Lilygo T5 4.7 Touchscreen...");
+  ESP_LOGCONFIG(TAG, "Running setup");
   this->interrupt_pin_->pin_mode(gpio::FLAG_INPUT | gpio::FLAG_PULLUP);
   this->interrupt_pin_->setup();
 

esphome/components/ltr390/ltr390.cpp

@@ -148,7 +148,7 @@ void LTR390Component::read_mode_(int mode_index) {
 }
 
 void LTR390Component::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up ltr390...");
+  ESP_LOGCONFIG(TAG, "Running setup");
 
   // reset
   std::bitset<8> ctrl = this->reg(LTR390_MAIN_CTRL).get();

esphome/components/ltr501/ltr501.cpp

@@ -74,7 +74,7 @@ static float get_ps_gain_coeff(PsGain501 gain) {
 }
 
 void LTRAlsPs501Component::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up LTR-501/301/558");
+  ESP_LOGCONFIG(TAG, "Running setup");
   // As per datasheet we need to wait at least 100ms after power on to get ALS chip responsive
   this->set_timeout(100, [this]() { this->state_ = State::DELAYED_SETUP; });
 }

esphome/components/ltr_als_ps/ltr_als_ps.cpp

@@ -63,7 +63,7 @@ static float get_ps_gain_coeff(PsGain gain) {
 }
 
 void LTRAlsPsComponent::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up LTR-303/329/55x/659");
+  ESP_LOGCONFIG(TAG, "Running setup");
   // As per datasheet we need to wait at least 100ms after power on to get ALS chip responsive
   this->set_timeout(100, [this]() { this->state_ = State::DELAYED_SETUP; });
 }

esphome/components/m5stack_8angle/m5stack_8angle.cpp

@@ -8,7 +8,7 @@ namespace m5stack_8angle {
 static const char *const TAG = "m5stack_8angle";
 
 void M5Stack8AngleComponent::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up M5STACK_8ANGLE...");
+  ESP_LOGCONFIG(TAG, "Running setup");
   i2c::ErrorCode err;
 
   err = this->read(nullptr, 0);

esphome/components/max17043/max17043.cpp

@@ -41,7 +41,7 @@ void MAX17043Component::update() {
 }
 
 void MAX17043Component::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up MAX17043...");
+  ESP_LOGCONFIG(TAG, "Running setup");
 
   uint16_t config_reg;
   if (this->write(&MAX17043_CONFIG, 1) != i2c::ERROR_OK) {

esphome/components/max31855/max31855.cpp

@@ -19,7 +19,7 @@ void MAX31855Sensor::update() {
 }
 
 void MAX31855Sensor::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up MAX31855Sensor '%s'...", this->name_.c_str());
+  ESP_LOGCONFIG(TAG, "Running setup for '%s'", this->name_.c_str());
   this->spi_setup();
 }
 void MAX31855Sensor::dump_config() {

esphome/components/max31856/max31856.cpp

@@ -11,7 +11,7 @@ static const char *const TAG = "max31856";
 // Based on Adafruit's library: https://github.com/adafruit/Adafruit_MAX31856
 
 void MAX31856Sensor::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up MAX31856Sensor '%s'...", this->name_.c_str());
+  ESP_LOGCONFIG(TAG, "Running setup for '%s'", this->name_.c_str());
   this->spi_setup();
 
   // assert on any fault
@@ -23,8 +23,6 @@ void MAX31856Sensor::setup() {
 
   this->set_thermocouple_type_();
   this->set_noise_filter_();
-
-  ESP_LOGCONFIG(TAG, "Completed setting up MAX31856Sensor '%s'...", this->name_.c_str());
 }
 
 void MAX31856Sensor::dump_config() {

esphome/components/max31865/max31865.cpp

@@ -65,7 +65,7 @@ void MAX31865Sensor::update() {
 }
 
 void MAX31865Sensor::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up MAX31865Sensor '%s'...", this->name_.c_str());
+  ESP_LOGCONFIG(TAG, "Running setup for '%s'", this->name_.c_str());
   this->spi_setup();
 
   // Build base configuration

esphome/components/max44009/max44009.cpp

@@ -21,7 +21,7 @@ static const uint8_t MAX44009_ERROR_HIGH_BYTE = -30;
 static const uint8_t MAX44009_ERROR_LOW_BYTE = -31;
 
 void MAX44009Sensor::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up MAX44009...");
+  ESP_LOGCONFIG(TAG, "Running setup");
   bool state_ok = false;
   if (this->mode_ == MAX44009Mode::MAX44009_MODE_LOW_POWER) {
     state_ok = this->set_low_power_mode();

esphome/components/max6675/max6675.cpp

@@ -18,7 +18,7 @@ void MAX6675Sensor::update() {
 }
 
 void MAX6675Sensor::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up MAX6675Sensor '%s'...", this->name_.c_str());
+  ESP_LOGCONFIG(TAG, "Running setup for '%s'", this->name_.c_str());
   this->spi_setup();
 }
 void MAX6675Sensor::dump_config() {

esphome/components/max6956/max6956.cpp

@@ -20,7 +20,7 @@ const uint8_t MASK_CURRENT_PIN = 0x0F;
  *    MAX6956                         *
  **************************************/
 void MAX6956::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up MAX6956...");
+  ESP_LOGCONFIG(TAG, "Running setup");
   uint8_t configuration;
   if (!this->read_reg_(MAX6956_CONFIGURATION, &configuration)) {
     this->mark_failed();

esphome/components/max7219/max7219.cpp

@@ -116,7 +116,7 @@ const uint8_t MAX7219_ASCII_TO_RAW[95] PROGMEM = {
 
 float MAX7219Component::get_setup_priority() const { return setup_priority::PROCESSOR; }
 void MAX7219Component::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up MAX7219...");
+  ESP_LOGCONFIG(TAG, "Running setup");
   this->spi_setup();
   this->buffer_ = new uint8_t[this->num_chips_ * 8];  // NOLINT
   for (uint8_t i = 0; i < this->num_chips_ * 8; i++)

esphome/components/max7219digit/max7219digit.cpp

@@ -26,7 +26,7 @@ constexpr uint8_t MAX7219_DISPLAY_TEST = 0x01;
 float MAX7219Component::get_setup_priority() const { return setup_priority::PROCESSOR; }
 
 void MAX7219Component::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up MAX7219_DIGITS...");
+  ESP_LOGCONFIG(TAG, "Running setup");
   this->spi_setup();
   this->stepsleft_ = 0;
   for (int chip_line = 0; chip_line < this->num_chip_lines_; chip_line++) {

esphome/components/max9611/max9611.cpp

@@ -29,8 +29,9 @@ static const uint8_t SETUP_DELAY = 4;         // Wait 2 integration periods.
 static const float VOUT_LSB = 14.0 / 1000.0;  // 14mV/LSB
 static const float TEMP_LSB = 0.48;           // 0.48C/LSB
 static const float MICRO_VOLTS_PER_VOLT = 1000000.0;
+
 void MAX9611Component::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up max9611...");
+  ESP_LOGCONFIG(TAG, "Running setup");
   // Perform dummy-read
   uint8_t value;
   this->read(&value, 1);

esphome/components/mcp23008/mcp23008.cpp

@@ -7,7 +7,7 @@ namespace mcp23008 {
 static const char *const TAG = "mcp23008";
 
 void MCP23008::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up MCP23008...");
+  ESP_LOGCONFIG(TAG, "Running setup");
   uint8_t iocon;
   if (!this->read_reg(mcp23x08_base::MCP23X08_IOCON, &iocon)) {
     this->mark_failed();

esphome/components/mcp23016/mcp23016.cpp

@@ -8,7 +8,7 @@ namespace mcp23016 {
 static const char *const TAG = "mcp23016";
 
 void MCP23016::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up MCP23016...");
+  ESP_LOGCONFIG(TAG, "Running setup");
   uint8_t iocon;
   if (!this->read_reg_(MCP23016_IOCON0, &iocon)) {
     this->mark_failed();

esphome/components/mcp23017/mcp23017.cpp

@@ -7,7 +7,7 @@ namespace mcp23017 {
 static const char *const TAG = "mcp23017";
 
 void MCP23017::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up MCP23017...");
+  ESP_LOGCONFIG(TAG, "Running setup");
   uint8_t iocon;
   if (!this->read_reg(mcp23x17_base::MCP23X17_IOCONA, &iocon)) {
     this->mark_failed();

esphome/components/mcp23s08/mcp23s08.cpp

@@ -13,7 +13,7 @@ void MCP23S08::set_device_address(uint8_t device_addr) {
 }
 
 void MCP23S08::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up MCP23S08...");
+  ESP_LOGCONFIG(TAG, "Running setup");
   this->spi_setup();
 
   this->enable();

esphome/components/mcp23s17/mcp23s17.cpp

@@ -13,7 +13,7 @@ void MCP23S17::set_device_address(uint8_t device_addr) {
 }
 
 void MCP23S17::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up MCP23S17...");
+  ESP_LOGCONFIG(TAG, "Running setup");
   this->spi_setup();
 
   this->enable();

esphome/components/mcp3008/mcp3008.cpp

@@ -11,7 +11,7 @@ static const char *const TAG = "mcp3008";
 float MCP3008::get_setup_priority() const { return setup_priority::HARDWARE; }
 
 void MCP3008::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up mcp3008");
+  ESP_LOGCONFIG(TAG, "Running setup");
   this->spi_setup();
 }
 

esphome/components/mcp3204/mcp3204.cpp

@@ -9,7 +9,7 @@ static const char *const TAG = "mcp3204";
 float MCP3204::get_setup_priority() const { return setup_priority::HARDWARE; }
 
 void MCP3204::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up mcp3204");
+  ESP_LOGCONFIG(TAG, "Running setup");
   this->spi_setup();
 }
 

esphome/components/mcp4461/mcp4461.cpp

@@ -10,7 +10,7 @@ static const char *const TAG = "mcp4461";
 constexpr uint8_t EEPROM_WRITE_TIMEOUT_MS = 10;
 
 void Mcp4461Component::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up mcp4461 using address (0x%02X)...", this->address_);
+  ESP_LOGCONFIG(TAG, "Running setup for address 0x%02X", this->address_);
   auto err = this->write(nullptr, 0);
   if (err != i2c::ERROR_OK) {
     this->error_code_ = MCP4461_STATUS_I2C_ERROR;

esphome/components/mcp4725/mcp4725.cpp

@@ -7,7 +7,7 @@ namespace mcp4725 {
 static const char *const TAG = "mcp4725";
 
 void MCP4725::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up MCP4725 (0x%02X)...", this->address_);
+  ESP_LOGCONFIG(TAG, "Running setup for address 0x%02X", this->address_);
   auto err = this->write(nullptr, 0);
   if (err != i2c::ERROR_OK) {
     this->error_code_ = COMMUNICATION_FAILED;

esphome/components/mcp4728/mcp4728.cpp

@@ -9,7 +9,7 @@ namespace mcp4728 {
 static const char *const TAG = "mcp4728";
 
 void MCP4728Component::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up MCP4728 (0x%02X)...", this->address_);
+  ESP_LOGCONFIG(TAG, "Running setup for address 0x%02X", this->address_);
   auto err = this->write(nullptr, 0);
   if (err != i2c::ERROR_OK) {
     this->mark_failed();

esphome/components/mcp9600/mcp9600.cpp

@@ -28,7 +28,7 @@ static const uint8_t MCP9600_REGISTER_ALERT4_LIMIT = 0x13;
 static const uint8_t MCP9600_REGISTER_DEVICE_ID = 0x20;
 
 void MCP9600Component::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up MCP9600...");
+  ESP_LOGCONFIG(TAG, "Running setup");
 
   uint16_t dev_id = 0;
   this->read_byte_16(MCP9600_REGISTER_DEVICE_ID, &dev_id);

esphome/components/mcp9808/mcp9808.cpp

@@ -18,7 +18,7 @@ static const uint8_t MCP9808_AMBIENT_TEMP_NEGATIVE = 0x10;
 static const char *const TAG = "mcp9808";
 
 void MCP9808Sensor::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up %s...", this->name_.c_str());
+  ESP_LOGCONFIG(TAG, "Running setup for '%s'", this->name_.c_str());
 
   uint16_t manu = 0;
   if (!this->read_byte_16(MCP9808_REG_MANUF_ID, &manu) || manu != MCP9808_MANUF_ID) {

esphome/components/micro_wake_word/micro_wake_word.cpp

@@ -72,7 +72,7 @@ void MicroWakeWord::dump_config() {
 }
 
 void MicroWakeWord::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up microWakeWord...");
+  ESP_LOGCONFIG(TAG, "Running setup");
 
   this->frontend_config_.window.size_ms = FEATURE_DURATION_MS;
   this->frontend_config_.window.step_size_ms = this->features_step_size_;

esphome/components/mics_4514/mics_4514.cpp

@@ -12,7 +12,7 @@ static const uint8_t SENSOR_REGISTER = 0x04;
 static const uint8_t POWER_MODE_REGISTER = 0x0a;
 
 void MICS4514Component::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up MICS 4514...");
+  ESP_LOGCONFIG(TAG, "Running setup");
   uint8_t power_mode;
   this->read_register(POWER_MODE_REGISTER, &power_mode, 1);
   if (power_mode == 0x00) {

esphome/components/mipi_spi/mipi_spi.cpp

@@ -5,7 +5,7 @@ namespace esphome {
 namespace mipi_spi {
 
 void MipiSpi::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up MIPI SPI");
+  ESP_LOGCONFIG(TAG, "Running setup");
   this->spi_setup();
   if (this->dc_pin_ != nullptr) {
     this->dc_pin_->setup();

esphome/components/mlx90393/sensor_mlx90393.cpp

@@ -103,7 +103,7 @@ bool MLX90393Cls::apply_all_settings_() {
 }
 
 void MLX90393Cls::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up MLX90393...");
+  ESP_LOGCONFIG(TAG, "Running setup");
   // note the two arguments A0 and A1 which are used to construct an i2c address
   // we can hard-code these because we never actually use the constructed address
   // see the transceive function above, which uses the address from I2CComponent

esphome/components/mlx90614/mlx90614.cpp

@@ -27,7 +27,7 @@ static const uint8_t MLX90614_ID4 = 0x3F;
 static const char *const TAG = "mlx90614";
 
 void MLX90614Component::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up MLX90614...");
+  ESP_LOGCONFIG(TAG, "Running setup");
   if (!this->write_emissivity_()) {
     ESP_LOGE(TAG, "Communication with MLX90614 failed!");
     this->mark_failed();

esphome/components/mmc5603/mmc5603.cpp

@@ -31,7 +31,7 @@ static const uint8_t MMC56X3_CTRL2_REG = 0x1D;
 static const uint8_t MMC5603_ODR_REG = 0x1A;
 
 void MMC5603Component::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up MMC5603...");
+  ESP_LOGCONFIG(TAG, "Running setup");
   uint8_t id = 0;
   if (!this->read_byte(MMC56X3_PRODUCT_ID, &id)) {
     this->error_code_ = COMMUNICATION_FAILED;

esphome/components/mmc5983/mmc5983.cpp

@@ -67,7 +67,7 @@ void MMC5983Component::update() {
 }
 
 void MMC5983Component::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up MMC5983...");
+  ESP_LOGCONFIG(TAG, "Running setup");
 
   // Verify product id.
   const uint8_t mmc5983_product_id = 0x30;

esphome/components/mpl3115a2/mpl3115a2.cpp

@@ -8,7 +8,7 @@ namespace mpl3115a2 {
 static const char *const TAG = "mpl3115a2";
 
 void MPL3115A2Component::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up MPL3115A2...");
+  ESP_LOGCONFIG(TAG, "Running setup");
 
   uint8_t whoami = 0xFF;
   if (!this->read_byte(MPL3115A2_WHOAMI, &whoami, false)) {

esphome/components/mpr121/mpr121.cpp

@@ -11,7 +11,7 @@ namespace mpr121 {
 static const char *const TAG = "mpr121";
 
 void MPR121Component::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up MPR121...");
+  ESP_LOGCONFIG(TAG, "Running setup");
   // soft reset device
   this->write_byte(MPR121_SOFTRESET, 0x63);
   delay(100);  // NOLINT

esphome/components/mpu6050/mpu6050.cpp

@@ -21,7 +21,7 @@ const uint8_t MPU6050_BIT_TEMPERATURE_DISABLED = 3;
 const float GRAVITY_EARTH = 9.80665f;
 
 void MPU6050Component::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up MPU6050...");
+  ESP_LOGCONFIG(TAG, "Running setup");
   uint8_t who_am_i;
   if (!this->read_byte(MPU6050_REGISTER_WHO_AM_I, &who_am_i) ||
       (who_am_i != 0x68 && who_am_i != 0x70 && who_am_i != 0x98)) {

esphome/components/mpu6886/mpu6886.cpp

@@ -26,7 +26,7 @@ const float TEMPERATURE_SENSITIVITY = 326.8;
 const float TEMPERATURE_OFFSET = 25.0;
 
 void MPU6886Component::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up MPU6886...");
+  ESP_LOGCONFIG(TAG, "Running setup");
   uint8_t who_am_i;
   if (!this->read_byte(MPU6886_REGISTER_WHO_AM_I, &who_am_i) || who_am_i != MPU6886_WHO_AM_I_IDENTIFIER) {
     this->mark_failed();

esphome/components/mqtt/mqtt_client.cpp

@@ -34,7 +34,7 @@ MQTTClientComponent::MQTTClientComponent() {
 
 // Connection
 void MQTTClientComponent::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up MQTT...");
+  ESP_LOGCONFIG(TAG, "Running setup");
   this->mqtt_backend_.set_on_message(
       [this](const char *topic, const char *payload, size_t len, size_t index, size_t total) {
         if (index == 0)

esphome/components/ms5611/ms5611.cpp

@@ -15,7 +15,7 @@ static const uint8_t MS5611_CMD_CONV_D2 = 0x50;
 static const uint8_t MS5611_CMD_READ_PROM = 0xA2;
 
 void MS5611Component::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up MS5611...");
+  ESP_LOGCONFIG(TAG, "Running setup");
   if (!this->write_bytes(MS5611_CMD_RESET, nullptr, 0)) {
     this->mark_failed();
     return;

esphome/components/ms8607/ms8607.cpp

@@ -67,7 +67,7 @@ static uint8_t crc4(uint16_t *buffer, size_t length);
 static uint8_t hsensor_crc_check(uint16_t value);
 
 void MS8607Component::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up MS8607...");
+  ESP_LOGCONFIG(TAG, "Running setup");
   this->error_code_ = ErrorCode::NONE;
   this->setup_status_ = SetupStatus::NEEDS_RESET;
 

esphome/components/msa3xx/msa3xx.cpp

@@ -118,7 +118,7 @@ const char *orientation_xy_to_string(OrientationXY orientation) {
 const char *orientation_z_to_string(bool orientation) { return orientation ? "Downwards looking" : "Upwards looking"; }
 
 void MSA3xxComponent::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up MSA3xx...");
+  ESP_LOGCONFIG(TAG, "Running setup");
 
   uint8_t part_id{0xff};
   if (!this->read_byte(static_cast<uint8_t>(RegisterMap::PART_ID), &part_id) || (part_id != MSA_3XX_PART_ID)) {

esphome/components/my9231/my9231.cpp

@@ -28,7 +28,7 @@ static const uint8_t MY9231_CMD_SCATTER_APDM = 0x0 << 0;
 static const uint8_t MY9231_CMD_SCATTER_PWM = 0x1 << 0;
 
 void MY9231OutputComponent::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up MY9231OutputComponent...");
+  ESP_LOGCONFIG(TAG, "Running setup");
   this->pin_di_->setup();
   this->pin_di_->digital_write(false);
   this->pin_dcki_->setup();