Bump esp-idf to 5.1.6 (#8566)

Co-authored-by: Keith Burzinski <kbx81x@gmail.com>

.clang-format

@@ -0,0 +1,137 @@
+Language:        Cpp
+AccessModifierOffset: -1
+AlignAfterOpenBracket: Align
+AlignConsecutiveAssignments: false
+AlignConsecutiveDeclarations: false
+AlignEscapedNewlines: DontAlign
+AlignOperands:   true
+AlignTrailingComments: true
+AllowAllParametersOfDeclarationOnNextLine: true
+AllowShortBlocksOnASingleLine: false
+AllowShortCaseLabelsOnASingleLine: false
+AllowShortFunctionsOnASingleLine: All
+AllowShortIfStatementsOnASingleLine: false
+AllowShortLoopsOnASingleLine: false
+AlwaysBreakAfterReturnType: None
+AlwaysBreakBeforeMultilineStrings: false
+AlwaysBreakTemplateDeclarations: MultiLine
+BinPackArguments: true
+BinPackParameters: true
+BraceWrapping:
+  AfterClass:      false
+  AfterControlStatement: false
+  AfterEnum:       false
+  AfterFunction:   false
+  AfterNamespace:  false
+  AfterObjCDeclaration: false
+  AfterStruct:     false
+  AfterUnion:      false
+  AfterExternBlock: false
+  BeforeCatch:     false
+  BeforeElse:      false
+  IndentBraces:    false
+  SplitEmptyFunction: true
+  SplitEmptyRecord: true
+  SplitEmptyNamespace: true
+BreakBeforeBinaryOperators: None
+BreakBeforeBraces: Attach
+BreakBeforeInheritanceComma: false
+BreakInheritanceList: BeforeColon
+BreakBeforeTernaryOperators: true
+BreakConstructorInitializersBeforeComma: false
+BreakConstructorInitializers: BeforeColon
+BreakAfterJavaFieldAnnotations: false
+BreakStringLiterals: true
+ColumnLimit:     120
+CommentPragmas:  '^ IWYU pragma:'
+CompactNamespaces: false
+ConstructorInitializerAllOnOneLineOrOnePerLine: true
+ConstructorInitializerIndentWidth: 4
+ContinuationIndentWidth: 4
+Cpp11BracedListStyle: true
+DerivePointerAlignment: false
+DisableFormat:   false
+ExperimentalAutoDetectBinPacking: false
+FixNamespaceComments: true
+ForEachMacros:
+  - foreach
+  - Q_FOREACH
+  - BOOST_FOREACH
+IncludeBlocks:   Preserve
+IncludeCategories:
+  - Regex:           '^<ext/.*\.h>'
+    Priority:        2
+  - Regex:           '^<.*\.h>'
+    Priority:        1
+  - Regex:           '^<.*'
+    Priority:        2
+  - Regex:           '.*'
+    Priority:        3
+IncludeIsMainRegex: '([-_](test|unittest))?$'
+IndentCaseLabels: true
+IndentPPDirectives: None
+IndentWidth:     2
+IndentWrappedFunctionNames: false
+KeepEmptyLinesAtTheStartOfBlocks: false
+MacroBlockBegin: ''
+MacroBlockEnd:   ''
+MaxEmptyLinesToKeep: 1
+NamespaceIndentation: None
+PenaltyBreakAssignment: 2
+PenaltyBreakBeforeFirstCallParameter: 1
+PenaltyBreakComment: 300
+PenaltyBreakFirstLessLess: 120
+PenaltyBreakString: 1000
+PenaltyBreakTemplateDeclaration: 10
+PenaltyExcessCharacter: 1000000
+PenaltyReturnTypeOnItsOwnLine: 2000
+PointerAlignment: Right
+RawStringFormats:
+  - Language:        Cpp
+    Delimiters:
+      - cc
+      - CC
+      - cpp
+      - Cpp
+      - CPP
+      - 'c++'
+      - 'C++'
+    CanonicalDelimiter: ''
+    BasedOnStyle:    google
+  - Language:        TextProto
+    Delimiters:
+      - pb
+      - PB
+      - proto
+      - PROTO
+    EnclosingFunctions:
+      - EqualsProto
+      - EquivToProto
+      - PARSE_PARTIAL_TEXT_PROTO
+      - PARSE_TEST_PROTO
+      - PARSE_TEXT_PROTO
+      - ParseTextOrDie
+      - ParseTextProtoOrDie
+    CanonicalDelimiter: ''
+    BasedOnStyle:    google
+ReflowComments:  true
+SortIncludes:    false
+SortUsingDeclarations: false
+SpaceAfterCStyleCast: true
+SpaceAfterTemplateKeyword: false
+SpaceBeforeAssignmentOperators: true
+SpaceBeforeCpp11BracedList: false
+SpaceBeforeCtorInitializerColon: true
+SpaceBeforeInheritanceColon: true
+SpaceBeforeParens: ControlStatements
+SpaceBeforeRangeBasedForLoopColon: true
+SpaceInEmptyParentheses: false
+SpacesBeforeTrailingComments: 2
+SpacesInAngles:  false
+SpacesInContainerLiterals: false
+SpacesInCStyleCastParentheses: false
+SpacesInParentheses: false
+SpacesInSquareBrackets: false
+Standard:        Auto
+TabWidth:        2
+UseTab:          Never

.clang-tidy

@@ -0,0 +1,199 @@
+---
+Checks: >-
+  *,
+  -abseil-*,
+  -altera-*,
+  -android-*,
+  -boost-*,
+  -bugprone-easily-swappable-parameters,
+  -bugprone-implicit-widening-of-multiplication-result,
+  -bugprone-multi-level-implicit-pointer-conversion,
+  -bugprone-narrowing-conversions,
+  -bugprone-signed-char-misuse,
+  -bugprone-switch-missing-default-case,
+  -cert-dcl50-cpp,
+  -cert-err33-c,
+  -cert-err58-cpp,
+  -cert-oop57-cpp,
+  -cert-str34-c,
+  -clang-analyzer-optin.core.EnumCastOutOfRange,
+  -clang-analyzer-optin.cplusplus.UninitializedObject,
+  -clang-analyzer-osx.*,
+  -clang-diagnostic-delete-abstract-non-virtual-dtor,
+  -clang-diagnostic-delete-non-abstract-non-virtual-dtor,
+  -clang-diagnostic-deprecated-declarations,
+  -clang-diagnostic-ignored-optimization-argument,
+  -clang-diagnostic-missing-field-initializers,
+  -clang-diagnostic-shadow-field,
+  -clang-diagnostic-unused-const-variable,
+  -clang-diagnostic-unused-parameter,
+  -clang-diagnostic-vla-cxx-extension,
+  -concurrency-*,
+  -cppcoreguidelines-avoid-c-arrays,
+  -cppcoreguidelines-avoid-const-or-ref-data-members,
+  -cppcoreguidelines-avoid-do-while,
+  -cppcoreguidelines-avoid-magic-numbers,
+  -cppcoreguidelines-init-variables,
+  -cppcoreguidelines-macro-to-enum,
+  -cppcoreguidelines-macro-usage,
+  -cppcoreguidelines-missing-std-forward,
+  -cppcoreguidelines-narrowing-conversions,
+  -cppcoreguidelines-non-private-member-variables-in-classes,
+  -cppcoreguidelines-owning-memory,
+  -cppcoreguidelines-prefer-member-initializer,
+  -cppcoreguidelines-pro-bounds-array-to-pointer-decay,
+  -cppcoreguidelines-pro-bounds-constant-array-index,
+  -cppcoreguidelines-pro-bounds-pointer-arithmetic,
+  -cppcoreguidelines-pro-type-const-cast,
+  -cppcoreguidelines-pro-type-cstyle-cast,
+  -cppcoreguidelines-pro-type-member-init,
+  -cppcoreguidelines-pro-type-reinterpret-cast,
+  -cppcoreguidelines-pro-type-static-cast-downcast,
+  -cppcoreguidelines-pro-type-union-access,
+  -cppcoreguidelines-pro-type-vararg,
+  -cppcoreguidelines-rvalue-reference-param-not-moved,
+  -cppcoreguidelines-special-member-functions,
+  -cppcoreguidelines-use-default-member-init,
+  -cppcoreguidelines-virtual-class-destructor,
+  -fuchsia-multiple-inheritance,
+  -fuchsia-overloaded-operator,
+  -fuchsia-statically-constructed-objects,
+  -fuchsia-default-arguments-declarations,
+  -fuchsia-default-arguments-calls,
+  -google-build-using-namespace,
+  -google-explicit-constructor,
+  -google-readability-braces-around-statements,
+  -google-readability-casting,
+  -google-readability-namespace-comments,
+  -google-readability-todo,
+  -google-runtime-references,
+  -hicpp-*,
+  -llvm-else-after-return,
+  -llvm-header-guard,
+  -llvm-include-order,
+  -llvm-qualified-auto,
+  -llvmlibc-*,
+  -misc-const-correctness,
+  -misc-include-cleaner,
+  -misc-no-recursion,
+  -misc-non-private-member-variables-in-classes,
+  -misc-unused-parameters,
+  -misc-use-anonymous-namespace,
+  -modernize-avoid-bind,
+  -modernize-avoid-c-arrays,
+  -modernize-concat-nested-namespaces,
+  -modernize-macro-to-enum,
+  -modernize-return-braced-init-list,
+  -modernize-type-traits,
+  -modernize-use-auto,
+  -modernize-use-constraints,
+  -modernize-use-default-member-init,
+  -modernize-use-equals-default,
+  -modernize-use-nodiscard,
+  -modernize-use-nullptr,
+  -modernize-use-nodiscard,
+  -modernize-use-nullptr,
+  -modernize-use-trailing-return-type,
+  -mpi-*,
+  -objc-*,
+  -performance-enum-size,
+  -readability-avoid-nested-conditional-operator,
+  -readability-container-contains,
+  -readability-container-data-pointer,
+  -readability-convert-member-functions-to-static,
+  -readability-else-after-return,
+  -readability-function-cognitive-complexity,
+  -readability-implicit-bool-conversion,
+  -readability-isolate-declaration,
+  -readability-magic-numbers,
+  -readability-make-member-function-const,
+  -readability-named-parameter,
+  -readability-redundant-casting,
+  -readability-redundant-inline-specifier,
+  -readability-redundant-member-init,
+  -readability-redundant-string-init,
+  -readability-uppercase-literal-suffix,
+  -readability-use-anyofallof,
+WarningsAsErrors: '*'
+FormatStyle:     google
+CheckOptions:
+  - key:             google-readability-function-size.StatementThreshold
+    value:           '800'
+  - key:             google-runtime-int.TypeSuffix
+    value:           '_t'
+  - key:             llvm-namespace-comment.ShortNamespaceLines
+    value:           '10'
+  - key:             llvm-namespace-comment.SpacesBeforeComments
+    value:           '2'
+  - key:             modernize-loop-convert.MaxCopySize
+    value:           '16'
+  - key:             modernize-loop-convert.MinConfidence
+    value:           reasonable
+  - key:             modernize-loop-convert.NamingStyle
+    value:           CamelCase
+  - key:             modernize-pass-by-value.IncludeStyle
+    value:           llvm
+  - key:             modernize-replace-auto-ptr.IncludeStyle
+    value:           llvm
+  - key:             modernize-use-nullptr.NullMacros
+    value:           'NULL'
+  - key:             modernize-make-unique.MakeSmartPtrFunction
+    value:           'make_unique'
+  - key:             modernize-make-unique.MakeSmartPtrFunctionHeader
+    value:           'esphome/core/helpers.h'
+  - key:             readability-braces-around-statements.ShortStatementLines
+    value:           2
+  - key:             readability-identifier-naming.LocalVariableCase
+    value:           'lower_case'
+  - key:             readability-identifier-naming.ClassCase
+    value:           'CamelCase'
+  - key:             readability-identifier-naming.StructCase
+    value:           'CamelCase'
+  - key:             readability-identifier-naming.EnumCase
+    value:           'CamelCase'
+  - key:             readability-identifier-naming.EnumConstantCase
+    value:           'UPPER_CASE'
+  - key:             readability-identifier-naming.StaticConstantCase
+    value:           'UPPER_CASE'
+  - key:             readability-identifier-naming.StaticVariableCase
+    value:           'lower_case'
+  - key:             readability-identifier-naming.GlobalConstantCase
+    value:           'UPPER_CASE'
+  - key:             readability-identifier-naming.ParameterCase
+    value:           'lower_case'
+  - key:             readability-identifier-naming.PrivateMemberCase
+    value:           'lower_case'
+  - key:             readability-identifier-naming.PrivateMemberSuffix
+    value:           '_'
+  - key:             readability-identifier-naming.PrivateMethodCase
+    value:           'lower_case'
+  - key:             readability-identifier-naming.PrivateMethodSuffix
+    value:           '_'
+  - key:             readability-identifier-naming.ClassMemberCase
+    value:           'lower_case'
+  - key:             readability-identifier-naming.ClassMemberCase
+    value:           'lower_case'
+  - key:             readability-identifier-naming.ProtectedMemberCase
+    value:           'lower_case'
+  - key:             readability-identifier-naming.ProtectedMemberSuffix
+    value:           '_'
+  - key:             readability-identifier-naming.FunctionCase
+    value:           'lower_case'
+  - key:             readability-identifier-naming.ClassMethodCase
+    value:           'lower_case'
+  - key:             readability-identifier-naming.ProtectedMethodCase
+    value:           'lower_case'
+  - key:             readability-identifier-naming.ProtectedMethodSuffix
+    value:           '_'
+  - key:             readability-identifier-naming.VirtualMethodCase
+    value:           'lower_case'
+  - key:             readability-identifier-naming.VirtualMethodSuffix
+    value:           ''
+  - key:             readability-qualified-auto.AddConstToQualified
+    value:           0
+  - key:             readability-identifier-length.MinimumVariableNameLength
+    value:           0
+  - key:             readability-identifier-length.MinimumParameterNameLength
+    value:           0
+  - key:             readability-identifier-length.MinimumLoopCounterNameLength
+    value:           0

.coveragerc

@@ -0,0 +1,2 @@
+[run]
+omit = esphome/components/*

.devcontainer/devcontainer.json

@@ -0,0 +1,88 @@
+{
+  "name": "ESPHome Dev",
+  "image": "ghcr.io/esphome/esphome-lint:dev",
+  "postCreateCommand": [
+    "script/devcontainer-post-create"
+  ],
+  "containerEnv": {
+    "DEVCONTAINER": "1",
+    "PIP_BREAK_SYSTEM_PACKAGES": "1",
+    "PIP_ROOT_USER_ACTION": "ignore"
+  },
+  "runArgs": [
+    "--privileged",
+    "-e",
+    "ESPHOME_DASHBOARD_USE_PING=1"
+    // uncomment and edit the path in order to pass though local USB serial to the conatiner
+    // , "--device=/dev/ttyACM0"
+  ],
+  "appPort": 6052,
+  // if you are using avahi in the host device, uncomment these to allow the
+  // devcontainer to find devices via mdns
+  //"mounts": [
+  //  "type=bind,source=/dev/bus/usb,target=/dev/bus/usb",
+  //  "type=bind,source=/var/run/dbus,target=/var/run/dbus",
+  //  "type=bind,source=/var/run/avahi-daemon/socket,target=/var/run/avahi-daemon/socket"
+  //],
+  "customizations": {
+    "vscode": {
+      "extensions": [
+        // python
+        "ms-python.python",
+        "ms-python.pylint",
+        "ms-python.flake8",
+        "charliermarsh.ruff",
+        "visualstudioexptteam.vscodeintellicode",
+        // yaml
+        "redhat.vscode-yaml",
+        // cpp
+        "ms-vscode.cpptools",
+        // editorconfig
+        "editorconfig.editorconfig"
+      ],
+      "settings": {
+        "python.languageServer": "Pylance",
+        "python.pythonPath": "/usr/bin/python3",
+        "pylint.args": [
+          "--rcfile=${workspaceFolder}/pyproject.toml"
+        ],
+        "flake8.args": [
+          "--config=${workspaceFolder}/.flake8"
+        ],
+        "ruff.configuration": "${workspaceFolder}/pyproject.toml",
+        "[python]": {
+          // VS will say "Value is not accepted" before building the devcontainer, but the warning
+          // should go away after build is completed.
+          "editor.defaultFormatter": "charliermarsh.ruff"
+        },
+        "editor.formatOnPaste": false,
+        "editor.formatOnSave": true,
+        "editor.formatOnType": true,
+        "files.trimTrailingWhitespace": true,
+        "terminal.integrated.defaultProfile.linux": "bash",
+        "yaml.customTags": [
+          "!secret scalar",
+          "!lambda scalar",
+          "!extend scalar",
+          "!remove scalar",
+          "!include_dir_named scalar",
+          "!include_dir_list scalar",
+          "!include_dir_merge_list scalar",
+          "!include_dir_merge_named scalar"
+        ],
+        "files.exclude": {
+          "**/.git": true,
+          "**/.DS_Store": true,
+          "**/*.pyc": {
+            "when": "$(basename).py"
+          },
+          "**/__pycache__": true
+        },
+        "files.associations": {
+          "**/.vscode/*.json": "jsonc"
+        },
+        "C_Cpp.clang_format_path": "/usr/bin/clang-format-13"
+      }
+    }
+  }
+}

.dockerignore

@@ -75,6 +75,9 @@ target/
 # pyenv
 .python-version
 
+# asdf
+.tool-versions
+
 # celery beat schedule file
 celerybeat-schedule
 
@@ -103,6 +106,10 @@ venv.bak/
 # mypy
 .mypy_cache/
 
+# PlatformIO
+.pio/
+
+# ESPHome
 config/
 examples/
 Dockerfile

.editorconfig

@@ -0,0 +1,33 @@
+root = true
+
+# general
+[*]
+end_of_line = lf
+insert_final_newline = true
+charset = utf-8
+
+# python
+[*.py]
+indent_style = space
+indent_size = 4
+
+# C++
+[*.{cpp,h,tcc}]
+indent_style = space
+indent_size = 2
+
+# Web
+[*.{js,html,css}]
+indent_style = space
+indent_size = 2
+
+# YAML
+[*.{yaml,yml}]
+indent_style = space
+indent_size = 2
+quote_type = double
+
+# JSON
+[*.json]
+indent_style = space
+indent_size = 2

.flake8

@@ -0,0 +1,42 @@
+[flake8]
+max-line-length = 120
+# Following 4 for black compatibility
+# E501: line too long
+# W503: Line break occurred before a binary operator
+# E203: Whitespace before ':'
+# D202 No blank lines allowed after function docstring
+
+# TODO fix flake8
+# D100 Missing docstring in public module
+# D101 Missing docstring in public class
+# D102 Missing docstring in public method
+# D103 Missing docstring in public function
+# D104 Missing docstring in public package
+# D105 Missing docstring in magic method
+# D107 Missing docstring in __init__
+# D200 One-line docstring should fit on one line with quotes
+# D205 1 blank line required between summary line and description
+# D209 Multi-line docstring closing quotes should be on a separate line
+# D400 First line should end with a period
+# D401 First line should be in imperative mood
+
+ignore =
+  E501,
+  W503,
+  E203,
+  D202,
+
+  D100,
+  D101,
+  D102,
+  D103,
+  D104,
+  D105,
+  D107,
+  D200,
+  D205,
+  D209,
+  D400,
+  D401,
+
+exclude = api_pb2.py

.gitattributes

@@ -0,0 +1,3 @@
+# Normalize line endings to LF in the repository
+* text eol=lf
+*.png binary

.github/ISSUE_TEMPLATE/config.yml

@@ -0,0 +1,15 @@
+---
+blank_issues_enabled: false
+contact_links:
+  - name: Issue Tracker
+    url: https://github.com/esphome/issues
+    about: Please create bug reports in the dedicated issue tracker.
+  - name: Feature Request Tracker
+    url: https://github.com/esphome/feature-requests
+    about: |
+      Please create feature requests in the dedicated feature request tracker.
+  - name: Frequently Asked Question
+    url: https://esphome.io/guides/faq.html
+    about: |
+      Please view the FAQ for common questions and what
+      to include in a bug report.

.github/PULL_REQUEST_TEMPLATE.md

@@ -1,14 +1,42 @@
-## Description:
+# What does this implement/fix?
 
+<!-- Quick description and explanation of changes -->
 
-**Related issue (if applicable):** fixes <link to issue>
+## Types of changes
 
-**Pull request in [esphome-docs](https://github.com/esphome/esphome-docs) with documentation (if applicable):** esphome/esphome-docs#<esphome-docs PR number goes here>
-**Pull request in [esphome-core](https://github.com/esphome/esphome-core) with C++ framework changes (if applicable):** esphome/esphome-core#<esphome-core PR number goes here>
+- [ ] Bugfix (non-breaking change which fixes an issue)
+- [ ] New feature (non-breaking change which adds functionality)
+- [ ] Breaking change (fix or feature that would cause existing functionality to not work as expected)
+- [ ] Code quality improvements to existing code or addition of tests
+- [ ] Other
+
+**Related issue or feature (if applicable):**
+
+- fixes <link to issue>
+
+**Pull request in [esphome-docs](https://github.com/esphome/esphome-docs) with documentation (if applicable):**
+
+- esphome/esphome-docs#<esphome-docs PR number goes here>
+
+## Test Environment
+
+- [ ] ESP32
+- [ ] ESP32 IDF
+- [ ] ESP8266
+- [ ] RP2040
+- [ ] BK72xx
+- [ ] RTL87xx
+
+## Example entry for `config.yaml`:
+
+```yaml
+# Example config.yaml
+
+```
 
 ## Checklist:
   - [ ] The code change is tested and works locally.
   - [ ] Tests have been added to verify that the new code works (under `tests/` folder).
 
 If user exposed functionality or configuration variables are added/changed:
-  - [ ] Documentation added/updated in [esphomedocs](https://github.com/OttoWinter/esphomedocs).
+  - [ ] Documentation added/updated in [esphome-docs](https://github.com/esphome/esphome-docs).

.github/actions/build-image/action.yaml

@@ -0,0 +1,97 @@
+name: Build Image
+inputs:
+  platform:
+    description: "Platform to build for"
+    required: true
+    example: "linux/amd64"
+  target:
+    description: "Target to build"
+    required: true
+    example: "docker"
+  baseimg:
+    description: "Base image type"
+    required: true
+    example: "docker"
+  suffix:
+    description: "Suffix to add to tags"
+    required: true
+  version:
+    description: "Version to build"
+    required: true
+    example: "2023.12.0"
+runs:
+  using: "composite"
+  steps:
+    - name: Generate short tags
+      id: tags
+      shell: bash
+      run: |
+        output=$(docker/generate_tags.py \
+          --tag "${{ inputs.version }}" \
+          --suffix "${{ inputs.suffix }}")
+        echo $output
+        for l in $output; do
+          echo $l >> $GITHUB_OUTPUT
+        done
+
+    # set cache-to only if dev branch
+    - id: cache-to
+      shell: bash
+      run: |-
+        if [[ "${{ github.ref }}" == "refs/heads/dev" ]]; then
+          echo "value=type=gha,mode=max" >> $GITHUB_OUTPUT
+        else
+          echo "value=" >> $GITHUB_OUTPUT
+        fi
+
+    - name: Build and push to ghcr by digest
+      id: build-ghcr
+      uses: docker/build-push-action@v6.15.0
+      env:
+        DOCKER_BUILD_SUMMARY: false
+        DOCKER_BUILD_RECORD_UPLOAD: false
+      with:
+        context: .
+        file: ./docker/Dockerfile
+        platforms: ${{ inputs.platform }}
+        target: ${{ inputs.target }}
+        cache-from: type=gha
+        cache-to: ${{ steps.cache-to.outputs.value }}
+        build-args: |
+          BASEIMGTYPE=${{ inputs.baseimg }}
+          BUILD_VERSION=${{ inputs.version }}
+        outputs: |
+          type=image,name=ghcr.io/${{ steps.tags.outputs.image_name }},push-by-digest=true,name-canonical=true,push=true
+
+    - name: Export ghcr digests
+      shell: bash
+      run: |
+        mkdir -p /tmp/digests/${{ inputs.target }}/ghcr
+        digest="${{ steps.build-ghcr.outputs.digest }}"
+        touch "/tmp/digests/${{ inputs.target }}/ghcr/${digest#sha256:}"
+
+    - name: Build and push to dockerhub by digest
+      id: build-dockerhub
+      uses: docker/build-push-action@v6.15.0
+      env:
+        DOCKER_BUILD_SUMMARY: false
+        DOCKER_BUILD_RECORD_UPLOAD: false
+      with:
+        context: .
+        file: ./docker/Dockerfile
+        platforms: ${{ inputs.platform }}
+        target: ${{ inputs.target }}
+        cache-from: type=gha
+        cache-to: ${{ steps.cache-to.outputs.value }}
+        build-args: |
+          BASEIMGTYPE=${{ inputs.baseimg }}
+          BUILD_VERSION=${{ inputs.version }}
+        outputs: |
+          type=image,name=docker.io/${{ steps.tags.outputs.image_name }},push-by-digest=true,name-canonical=true,push=true
+
+    - name: Export dockerhub digests
+      shell: bash
+      run: |
+        mkdir -p /tmp/digests/${{ inputs.target }}/dockerhub
+        digest="${{ steps.build-dockerhub.outputs.digest }}"
+        touch "/tmp/digests/${{ inputs.target }}/dockerhub/${digest#sha256:}"

.github/actions/restore-python/action.yml

@@ -0,0 +1,47 @@
+name: Restore Python
+inputs:
+  python-version:
+    description: Python version to restore
+    required: true
+    type: string
+  cache-key:
+    description: Cache key to use
+    required: true
+    type: string
+outputs:
+  python-version:
+    description: Python version restored
+    value: ${{ steps.python.outputs.python-version }}
+runs:
+  using: "composite"
+  steps:
+    - name: Set up Python ${{ inputs.python-version }}
+      id: python
+      uses: actions/setup-python@v5.5.0
+      with:
+        python-version: ${{ inputs.python-version }}
+    - name: Restore Python virtual environment
+      id: cache-venv
+      uses: actions/cache/restore@v4.2.3
+      with:
+        path: venv
+        # yamllint disable-line rule:line-length
+        key: ${{ runner.os }}-${{ steps.python.outputs.python-version }}-venv-${{ inputs.cache-key }}
+    - name: Create Python virtual environment
+      if: steps.cache-venv.outputs.cache-hit != 'true' && runner.os != 'Windows'
+      shell: bash
+      run: |
+        python -m venv venv
+        source venv/bin/activate
+        python --version
+        pip install -r requirements.txt -r requirements_optional.txt -r requirements_test.txt
+        pip install -e .
+    - name: Create Python virtual environment
+      if: steps.cache-venv.outputs.cache-hit != 'true' && runner.os == 'Windows'
+      shell: bash
+      run: |
+        python -m venv venv
+        ./venv/Scripts/activate
+        python --version
+        pip install -r requirements.txt -r requirements_optional.txt -r requirements_test.txt
+        pip install -e .

.github/dependabot.yml

@@ -0,0 +1,32 @@
+---
+version: 2
+updates:
+  - package-ecosystem: pip
+    directory: "/"
+    schedule:
+      interval: daily
+    ignore:
+      # Hypotehsis is only used for testing and is updated quite often
+      - dependency-name: hypothesis
+  - package-ecosystem: github-actions
+    directory: "/"
+    schedule:
+      interval: daily
+    open-pull-requests-limit: 10
+    groups:
+      docker-actions:
+        applies-to: version-updates
+        patterns:
+          - "docker/setup-qemu-action"
+          - "docker/login-action"
+          - "docker/setup-buildx-action"
+  - package-ecosystem: github-actions
+    directory: "/.github/actions/build-image"
+    schedule:
+      interval: daily
+    open-pull-requests-limit: 10
+  - package-ecosystem: github-actions
+    directory: "/.github/actions/restore-python"
+    schedule:
+      interval: daily
+    open-pull-requests-limit: 10

.github/workflows/ci-api-proto.yml

@@ -0,0 +1,80 @@
+name: API Proto CI
+
+on:
+  pull_request:
+    paths:
+      - "esphome/components/api/api.proto"
+      - "esphome/components/api/api_pb2.cpp"
+      - "esphome/components/api/api_pb2.h"
+      - "esphome/components/api/api_pb2_service.cpp"
+      - "esphome/components/api/api_pb2_service.h"
+      - "script/api_protobuf/api_protobuf.py"
+      - ".github/workflows/ci-api-proto.yml"
+
+permissions:
+  contents: read
+  pull-requests: write
+
+jobs:
+  check:
+    name: Check generated files
+    runs-on: ubuntu-latest
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v4.1.7
+      - name: Set up Python
+        uses: actions/setup-python@v5.5.0
+        with:
+          python-version: "3.11"
+
+      - name: Install apt dependencies
+        run: |
+          sudo apt update
+          sudo apt-cache show protobuf-compiler
+          sudo apt install -y protobuf-compiler
+          protoc --version
+      - name: Install python dependencies
+        run: pip install aioesphomeapi -c requirements.txt -r requirements_dev.txt
+      - name: Generate files
+        run: script/api_protobuf/api_protobuf.py
+      - name: Check for changes
+        run: |
+          if ! git diff --quiet; then
+            echo "## Job Failed" | tee -a $GITHUB_STEP_SUMMARY
+            echo "You have altered the generated proto files but they do not match what is expected." | tee -a $GITHUB_STEP_SUMMARY
+            echo "Please run 'script/api_protobuf/api_protobuf.py' and commit the changes." | tee -a $GITHUB_STEP_SUMMARY
+            exit 1
+          fi
+      - if: failure()
+        name: Review PR
+        uses: actions/github-script@v7.0.1
+        with:
+          script: |
+            await github.rest.pulls.createReview({
+              pull_number: context.issue.number,
+              owner: context.repo.owner,
+              repo: context.repo.repo,
+              event: 'REQUEST_CHANGES',
+              body: 'You have altered the generated proto files but they do not match what is expected.\nPlease run "script/api_protobuf/api_protobuf.py" and commit the changes.'
+            })
+      - if: success()
+        name: Dismiss review
+        uses: actions/github-script@v7.0.1
+        with:
+          script: |
+            let reviews = await github.rest.pulls.listReviews({
+              pull_number: context.issue.number,
+              owner: context.repo.owner,
+              repo: context.repo.repo
+            });
+            for (let review of reviews.data) {
+              if (review.user.login === 'github-actions[bot]' && review.state === 'CHANGES_REQUESTED') {
+                await github.rest.pulls.dismissReview({
+                  pull_number: context.issue.number,
+                  owner: context.repo.owner,
+                  repo: context.repo.repo,
+                  review_id: review.id,
+                  message: 'Files now match the expected proto files.'
+                });
+              }
+            }

.github/workflows/ci-docker.yml

@@ -0,0 +1,61 @@
+---
+name: CI for docker images
+
+# Only run when docker paths change
+
+on:
+  push:
+    branches: [dev, beta, release]
+    paths:
+      - "docker/**"
+      - ".github/workflows/ci-docker.yml"
+      - "requirements*.txt"
+      - "platformio.ini"
+      - "script/platformio_install_deps.py"
+
+  pull_request:
+    paths:
+      - "docker/**"
+      - ".github/workflows/ci-docker.yml"
+      - "requirements*.txt"
+      - "platformio.ini"
+      - "script/platformio_install_deps.py"
+
+permissions:
+  contents: read
+  packages: read
+
+concurrency:
+  # yamllint disable-line rule:line-length
+  group: ${{ github.workflow }}-${{ github.event.pull_request.number || github.ref }}
+  cancel-in-progress: true
+
+jobs:
+  check-docker:
+    name: Build docker containers
+    runs-on: ${{ matrix.os }}
+    strategy:
+      fail-fast: false
+      matrix:
+        os: ["ubuntu-latest", "ubuntu-24.04-arm"]
+        build_type: ["ha-addon", "docker", "lint"]
+    steps:
+      - uses: actions/checkout@v4.1.7
+      - name: Set up Python
+        uses: actions/setup-python@v5.5.0
+        with:
+          python-version: "3.9"
+      - name: Set up Docker Buildx
+        uses: docker/setup-buildx-action@v3.10.0
+
+      - name: Set TAG
+        run: |
+          echo "TAG=check" >> $GITHUB_ENV
+
+      - name: Run build
+        run: |
+          docker/build.py \
+            --tag "${TAG}" \
+            --arch "${{ matrix.os == 'ubuntu-24.04-arm' && 'aarch64' || 'amd64' }}" \
+            --build-type "${{ matrix.build_type }}" \
+            build

.github/workflows/ci.yml

@@ -0,0 +1,508 @@
+---
+name: CI
+
+on:
+  push:
+    branches: [dev, beta, release]
+
+  pull_request:
+    paths:
+      - "**"
+      - "!.github/workflows/*.yml"
+      - "!.github/actions/build-image/*"
+      - ".github/workflows/ci.yml"
+      - "!.yamllint"
+      - "!.github/dependabot.yml"
+      - "!docker/**"
+  merge_group:
+
+permissions:
+  contents: read
+
+env:
+  DEFAULT_PYTHON: "3.9"
+  PYUPGRADE_TARGET: "--py39-plus"
+
+concurrency:
+  # yamllint disable-line rule:line-length
+  group: ${{ github.workflow }}-${{ github.event.pull_request.number || github.ref }}
+  cancel-in-progress: true
+
+jobs:
+  common:
+    name: Create common environment
+    runs-on: ubuntu-24.04
+    outputs:
+      cache-key: ${{ steps.cache-key.outputs.key }}
+    steps:
+      - name: Check out code from GitHub
+        uses: actions/checkout@v4.1.7
+      - name: Generate cache-key
+        id: cache-key
+        run: echo key="${{ hashFiles('requirements.txt', 'requirements_optional.txt', 'requirements_test.txt') }}" >> $GITHUB_OUTPUT
+      - name: Set up Python ${{ env.DEFAULT_PYTHON }}
+        id: python
+        uses: actions/setup-python@v5.5.0
+        with:
+          python-version: ${{ env.DEFAULT_PYTHON }}
+      - name: Restore Python virtual environment
+        id: cache-venv
+        uses: actions/cache@v4.2.3
+        with:
+          path: venv
+          # yamllint disable-line rule:line-length
+          key: ${{ runner.os }}-${{ steps.python.outputs.python-version }}-venv-${{ steps.cache-key.outputs.key }}
+      - name: Create Python virtual environment
+        if: steps.cache-venv.outputs.cache-hit != 'true'
+        run: |
+          python -m venv venv
+          . venv/bin/activate
+          python --version
+          pip install -r requirements.txt -r requirements_optional.txt -r requirements_test.txt
+          pip install -e .
+
+  ruff:
+    name: Check ruff
+    runs-on: ubuntu-24.04
+    needs:
+      - common
+    steps:
+      - name: Check out code from GitHub
+        uses: actions/checkout@v4.1.7
+      - name: Restore Python
+        uses: ./.github/actions/restore-python
+        with:
+          python-version: ${{ env.DEFAULT_PYTHON }}
+          cache-key: ${{ needs.common.outputs.cache-key }}
+      - name: Run Ruff
+        run: |
+          . venv/bin/activate
+          ruff format esphome tests
+      - name: Suggested changes
+        run: script/ci-suggest-changes
+        if: always()
+
+  flake8:
+    name: Check flake8
+    runs-on: ubuntu-24.04
+    needs:
+      - common
+    steps:
+      - name: Check out code from GitHub
+        uses: actions/checkout@v4.1.7
+      - name: Restore Python
+        uses: ./.github/actions/restore-python
+        with:
+          python-version: ${{ env.DEFAULT_PYTHON }}
+          cache-key: ${{ needs.common.outputs.cache-key }}
+      - name: Run flake8
+        run: |
+          . venv/bin/activate
+          flake8 esphome
+      - name: Suggested changes
+        run: script/ci-suggest-changes
+        if: always()
+
+  pylint:
+    name: Check pylint
+    runs-on: ubuntu-24.04
+    needs:
+      - common
+    steps:
+      - name: Check out code from GitHub
+        uses: actions/checkout@v4.1.7
+      - name: Restore Python
+        uses: ./.github/actions/restore-python
+        with:
+          python-version: ${{ env.DEFAULT_PYTHON }}
+          cache-key: ${{ needs.common.outputs.cache-key }}
+      - name: Run pylint
+        run: |
+          . venv/bin/activate
+          pylint -f parseable --persistent=n esphome
+      - name: Suggested changes
+        run: script/ci-suggest-changes
+        if: always()
+
+  pyupgrade:
+    name: Check pyupgrade
+    runs-on: ubuntu-24.04
+    needs:
+      - common
+    steps:
+      - name: Check out code from GitHub
+        uses: actions/checkout@v4.1.7
+      - name: Restore Python
+        uses: ./.github/actions/restore-python
+        with:
+          python-version: ${{ env.DEFAULT_PYTHON }}
+          cache-key: ${{ needs.common.outputs.cache-key }}
+      - name: Run pyupgrade
+        run: |
+          . venv/bin/activate
+          pyupgrade ${{ env.PYUPGRADE_TARGET }} `find esphome -name "*.py" -type f`
+      - name: Suggested changes
+        run: script/ci-suggest-changes
+        if: always()
+
+  ci-custom:
+    name: Run script/ci-custom
+    runs-on: ubuntu-24.04
+    needs:
+      - common
+    steps:
+      - name: Check out code from GitHub
+        uses: actions/checkout@v4.1.7
+      - name: Restore Python
+        uses: ./.github/actions/restore-python
+        with:
+          python-version: ${{ env.DEFAULT_PYTHON }}
+          cache-key: ${{ needs.common.outputs.cache-key }}
+      - name: Register matcher
+        run: echo "::add-matcher::.github/workflows/matchers/ci-custom.json"
+      - name: Run script/ci-custom
+        run: |
+          . venv/bin/activate
+          script/ci-custom.py
+          script/build_codeowners.py --check
+
+  pytest:
+    name: Run pytest
+    strategy:
+      fail-fast: false
+      matrix:
+        python-version:
+          - "3.9"
+          - "3.10"
+          - "3.11"
+          - "3.12"
+        os:
+          - ubuntu-latest
+          - macOS-latest
+          - windows-latest
+        exclude:
+          # Minimize CI resource usage
+          # by only running the Python version
+          # version used for docker images on Windows and macOS
+          - python-version: "3.12"
+            os: windows-latest
+          - python-version: "3.10"
+            os: windows-latest
+          - python-version: "3.9"
+            os: windows-latest
+          - python-version: "3.12"
+            os: macOS-latest
+          - python-version: "3.10"
+            os: macOS-latest
+          - python-version: "3.9"
+            os: macOS-latest
+    runs-on: ${{ matrix.os }}
+    needs:
+      - common
+    steps:
+      - name: Check out code from GitHub
+        uses: actions/checkout@v4.1.7
+      - name: Restore Python
+        uses: ./.github/actions/restore-python
+        with:
+          python-version: ${{ matrix.python-version }}
+          cache-key: ${{ needs.common.outputs.cache-key }}
+      - name: Register matcher
+        run: echo "::add-matcher::.github/workflows/matchers/pytest.json"
+      - name: Run pytest
+        if: matrix.os == 'windows-latest'
+        run: |
+          ./venv/Scripts/activate
+          pytest -vv --cov-report=xml --tb=native tests
+      - name: Run pytest
+        if: matrix.os == 'ubuntu-latest' || matrix.os == 'macOS-latest'
+        run: |
+          . venv/bin/activate
+          pytest -vv --cov-report=xml --tb=native tests
+      - name: Upload coverage to Codecov
+        uses: codecov/codecov-action@v5.4.2
+        with:
+          token: ${{ secrets.CODECOV_TOKEN }}
+
+  clang-format:
+    name: Check clang-format
+    runs-on: ubuntu-24.04
+    needs:
+      - common
+    steps:
+      - name: Check out code from GitHub
+        uses: actions/checkout@v4.1.7
+      - name: Restore Python
+        uses: ./.github/actions/restore-python
+        with:
+          python-version: ${{ env.DEFAULT_PYTHON }}
+          cache-key: ${{ needs.common.outputs.cache-key }}
+      - name: Install clang-format
+        run: |
+          . venv/bin/activate
+          pip install clang-format -c requirements_dev.txt
+      - name: Run clang-format
+        run: |
+          . venv/bin/activate
+          script/clang-format -i
+          git diff-index --quiet HEAD --
+      - name: Suggested changes
+        run: script/ci-suggest-changes
+        if: always()
+
+  clang-tidy:
+    name: ${{ matrix.name }}
+    runs-on: ubuntu-24.04
+    needs:
+      - common
+      - ruff
+      - ci-custom
+      - clang-format
+      - flake8
+      - pylint
+      - pytest
+      - pyupgrade
+    strategy:
+      fail-fast: false
+      max-parallel: 2
+      matrix:
+        include:
+          - id: clang-tidy
+            name: Run script/clang-tidy for ESP8266
+            options: --environment esp8266-arduino-tidy --grep USE_ESP8266
+            pio_cache_key: tidyesp8266
+          - id: clang-tidy
+            name: Run script/clang-tidy for ESP32 Arduino 1/4
+            options: --environment esp32-arduino-tidy --split-num 4 --split-at 1
+            pio_cache_key: tidyesp32
+          - id: clang-tidy
+            name: Run script/clang-tidy for ESP32 Arduino 2/4
+            options: --environment esp32-arduino-tidy --split-num 4 --split-at 2
+            pio_cache_key: tidyesp32
+          - id: clang-tidy
+            name: Run script/clang-tidy for ESP32 Arduino 3/4
+            options: --environment esp32-arduino-tidy --split-num 4 --split-at 3
+            pio_cache_key: tidyesp32
+          - id: clang-tidy
+            name: Run script/clang-tidy for ESP32 Arduino 4/4
+            options: --environment esp32-arduino-tidy --split-num 4 --split-at 4
+            pio_cache_key: tidyesp32
+          - id: clang-tidy
+            name: Run script/clang-tidy for ESP32 IDF
+            options: --environment esp32-idf-tidy --grep USE_ESP_IDF
+            pio_cache_key: tidyesp32-idf
+
+    steps:
+      - name: Check out code from GitHub
+        uses: actions/checkout@v4.1.7
+      - name: Restore Python
+        uses: ./.github/actions/restore-python
+        with:
+          python-version: ${{ env.DEFAULT_PYTHON }}
+          cache-key: ${{ needs.common.outputs.cache-key }}
+
+      - name: Cache platformio
+        if: github.ref == 'refs/heads/dev'
+        uses: actions/cache@v4.2.3
+        with:
+          path: ~/.platformio
+          key: platformio-${{ matrix.pio_cache_key }}
+
+      - name: Cache platformio
+        if: github.ref != 'refs/heads/dev'
+        uses: actions/cache/restore@v4.2.3
+        with:
+          path: ~/.platformio
+          key: platformio-${{ matrix.pio_cache_key }}
+
+      - name: Register problem matchers
+        run: |
+          echo "::add-matcher::.github/workflows/matchers/gcc.json"
+          echo "::add-matcher::.github/workflows/matchers/clang-tidy.json"
+
+      - name: Run 'pio run --list-targets -e esp32-idf-tidy'
+        if: matrix.name == 'Run script/clang-tidy for ESP32 IDF'
+        run: |
+          . venv/bin/activate
+          mkdir -p .temp
+          pio run --list-targets -e esp32-idf-tidy
+
+      - name: Run clang-tidy
+        run: |
+          . venv/bin/activate
+          script/clang-tidy --all-headers --fix ${{ matrix.options }}
+        env:
+          # Also cache libdeps, store them in a ~/.platformio subfolder
+          PLATFORMIO_LIBDEPS_DIR: ~/.platformio/libdeps
+
+      - name: Suggested changes
+        run: script/ci-suggest-changes
+        # yamllint disable-line rule:line-length
+        if: always()
+
+  list-components:
+    runs-on: ubuntu-24.04
+    needs:
+      - common
+    if: github.event_name == 'pull_request'
+    outputs:
+      components: ${{ steps.list-components.outputs.components }}
+      count: ${{ steps.list-components.outputs.count }}
+    steps:
+      - name: Check out code from GitHub
+        uses: actions/checkout@v4.1.7
+        with:
+          # Fetch enough history so `git merge-base refs/remotes/origin/dev HEAD` works.
+          fetch-depth: 500
+      - name: Get target branch
+        id: target-branch
+        run: |
+          echo "branch=${{ github.event.pull_request.base.ref }}" >> $GITHUB_OUTPUT
+      - name: Fetch ${{ steps.target-branch.outputs.branch }} branch
+        run: |
+          git -c protocol.version=2 fetch --no-tags --prune --no-recurse-submodules --depth=1 origin +refs/heads/${{ steps.target-branch.outputs.branch }}:refs/remotes/origin/${{ steps.target-branch.outputs.branch }}
+          git merge-base refs/remotes/origin/${{ steps.target-branch.outputs.branch }} HEAD
+      - name: Restore Python
+        uses: ./.github/actions/restore-python
+        with:
+          python-version: ${{ env.DEFAULT_PYTHON }}
+          cache-key: ${{ needs.common.outputs.cache-key }}
+      - name: Find changed components
+        id: list-components
+        run: |
+          . venv/bin/activate
+          components=$(script/list-components.py --changed --branch ${{ steps.target-branch.outputs.branch }})
+          output_components=$(echo "$components" | jq -R -s -c 'split("\n")[:-1] | map(select(length > 0))')
+          count=$(echo "$output_components" | jq length)
+
+          echo "components=$output_components" >> $GITHUB_OUTPUT
+          echo "count=$count" >> $GITHUB_OUTPUT
+
+          echo "$count Components:"
+          echo "$output_components" | jq
+
+  test-build-components:
+    name: Component test ${{ matrix.file }}
+    runs-on: ubuntu-24.04
+    needs:
+      - common
+      - list-components
+    if: github.event_name == 'pull_request' && fromJSON(needs.list-components.outputs.count) > 0 && fromJSON(needs.list-components.outputs.count) < 100
+    strategy:
+      fail-fast: false
+      max-parallel: 2
+      matrix:
+        file: ${{ fromJson(needs.list-components.outputs.components) }}
+    steps:
+      - name: Install dependencies
+        run: |
+          sudo apt-get update
+          sudo apt-get install libsdl2-dev
+
+      - name: Check out code from GitHub
+        uses: actions/checkout@v4.1.7
+      - name: Restore Python
+        uses: ./.github/actions/restore-python
+        with:
+          python-version: ${{ env.DEFAULT_PYTHON }}
+          cache-key: ${{ needs.common.outputs.cache-key }}
+      - name: test_build_components -e config -c ${{ matrix.file }}
+        run: |
+          . venv/bin/activate
+          ./script/test_build_components -e config -c ${{ matrix.file }}
+      - name: test_build_components -e compile -c ${{ matrix.file }}
+        run: |
+          . venv/bin/activate
+          ./script/test_build_components -e compile -c ${{ matrix.file }}
+
+  test-build-components-splitter:
+    name: Split components for testing into 20 groups maximum
+    runs-on: ubuntu-24.04
+    needs:
+      - common
+      - list-components
+    if: github.event_name == 'pull_request' && fromJSON(needs.list-components.outputs.count) >= 100
+    outputs:
+      matrix: ${{ steps.split.outputs.components }}
+    steps:
+      - name: Check out code from GitHub
+        uses: actions/checkout@v4.1.7
+      - name: Split components into 20 groups
+        id: split
+        run: |
+          components=$(echo '${{ needs.list-components.outputs.components }}' | jq -c '.[]' | shuf | jq -s -c '[_nwise(20) | join(" ")]')
+          echo "components=$components" >> $GITHUB_OUTPUT
+
+  test-build-components-split:
+    name: Test split components
+    runs-on: ubuntu-24.04
+    needs:
+      - common
+      - list-components
+      - test-build-components-splitter
+    if: github.event_name == 'pull_request' && fromJSON(needs.list-components.outputs.count) >= 100
+    strategy:
+      fail-fast: false
+      max-parallel: 4
+      matrix:
+        components: ${{ fromJson(needs.test-build-components-splitter.outputs.matrix) }}
+    steps:
+      - name: List components
+        run: echo ${{ matrix.components }}
+
+      - name: Install dependencies
+        run: |
+          sudo apt-get update
+          sudo apt-get install libsdl2-dev
+
+      - name: Check out code from GitHub
+        uses: actions/checkout@v4.1.7
+      - name: Restore Python
+        uses: ./.github/actions/restore-python
+        with:
+          python-version: ${{ env.DEFAULT_PYTHON }}
+          cache-key: ${{ needs.common.outputs.cache-key }}
+      - name: Validate config
+        run: |
+          . venv/bin/activate
+          for component in ${{ matrix.components }}; do
+            ./script/test_build_components -e config -c $component
+          done
+      - name: Compile config
+        run: |
+          . venv/bin/activate
+          mkdir build_cache
+          export PLATFORMIO_BUILD_CACHE_DIR=$PWD/build_cache
+          for component in ${{ matrix.components }}; do
+            ./script/test_build_components -e compile -c $component
+          done
+
+  ci-status:
+    name: CI Status
+    runs-on: ubuntu-24.04
+    needs:
+      - common
+      - ruff
+      - ci-custom
+      - clang-format
+      - flake8
+      - pylint
+      - pytest
+      - pyupgrade
+      - clang-tidy
+      - list-components
+      - test-build-components
+      - test-build-components-splitter
+      - test-build-components-split
+    if: always()
+    steps:
+      - name: Success
+        if: ${{ !(contains(needs.*.result, 'failure')) }}
+        run: exit 0
+      - name: Failure
+        if: ${{ contains(needs.*.result, 'failure') }}
+        env:
+          JSON_DOC: ${{ toJSON(needs) }}
+        run: |
+          echo $JSON_DOC | jq
+          exit 1

.github/workflows/codeql.yml

@@ -0,0 +1,91 @@
+# For most projects, this workflow file will not need changing; you simply need
+# to commit it to your repository.
+#
+# You may wish to alter this file to override the set of languages analyzed,
+# or to provide custom queries or build logic.
+#
+# ******** NOTE ********
+# We have attempted to detect the languages in your repository. Please check
+# the `language` matrix defined below to confirm you have the correct set of
+# supported CodeQL languages.
+#
+name: "CodeQL Advanced"
+
+on:
+  workflow_dispatch:
+  schedule:
+    - cron: "30 18 * * 4"
+
+jobs:
+  analyze:
+    name: Analyze (${{ matrix.language }})
+    # Runner size impacts CodeQL analysis time. To learn more, please see:
+    #   - https://gh.io/recommended-hardware-resources-for-running-codeql
+    #   - https://gh.io/supported-runners-and-hardware-resources
+    #   - https://gh.io/using-larger-runners (GitHub.com only)
+    # Consider using larger runners or machines with greater resources for possible analysis time improvements.
+    runs-on: ${{ (matrix.language == 'swift' && 'macos-latest') || 'ubuntu-latest' }}
+    permissions:
+      # required for all workflows
+      security-events: write
+
+      # required to fetch internal or private CodeQL packs
+      packages: read
+
+      # only required for workflows in private repositories
+      actions: read
+      contents: read
+
+    strategy:
+      fail-fast: false
+      matrix:
+        include:
+          # - language: c-cpp
+          #   build-mode: autobuild
+          - language: python
+            build-mode: none
+            # CodeQL supports the following values keywords for 'language': 'c-cpp', 'csharp', 'go', 'java-kotlin', 'javascript-typescript', 'python', 'ruby', 'swift'
+            # Use `c-cpp` to analyze code written in C, C++ or both
+            # Use 'java-kotlin' to analyze code written in Java, Kotlin or both
+            # Use 'javascript-typescript' to analyze code written in JavaScript, TypeScript or both
+            # To learn more about changing the languages that are analyzed or customizing the build mode for your analysis,
+            # see https://docs.github.com/en/code-security/code-scanning/creating-an-advanced-setup-for-code-scanning/customizing-your-advanced-setup-for-code-scanning.
+            # If you are analyzing a compiled language, you can modify the 'build-mode' for that language to customize how
+            # your codebase is analyzed, see https://docs.github.com/en/code-security/code-scanning/creating-an-advanced-setup-for-code-scanning/codeql-code-scanning-for-compiled-languages
+    steps:
+      - name: Checkout repository
+        uses: actions/checkout@v4
+
+      # Initializes the CodeQL tools for scanning.
+      - name: Initialize CodeQL
+        uses: github/codeql-action/init@v3
+        with:
+          languages: ${{ matrix.language }}
+          build-mode: ${{ matrix.build-mode }}
+          # If you wish to specify custom queries, you can do so here or in a config file.
+          # By default, queries listed here will override any specified in a config file.
+          # Prefix the list here with "+" to use these queries and those in the config file.
+
+          # For more details on CodeQL's query packs, refer to: https://docs.github.com/en/code-security/code-scanning/automatically-scanning-your-code-for-vulnerabilities-and-errors/configuring-code-scanning#using-queries-in-ql-packs
+          # queries: security-extended,security-and-quality
+
+      # If the analyze step fails for one of the languages you are analyzing with
+      # "We were unable to automatically build your code", modify the matrix above
+      # to set the build mode to "manual" for that language. Then modify this step
+      # to build your code.
+      # ℹ️ Command-line programs to run using the OS shell.
+      # 📚 See https://docs.github.com/en/actions/using-workflows/workflow-syntax-for-github-actions#jobsjob_idstepsrun
+      - if: matrix.build-mode == 'manual'
+        shell: bash
+        run: |
+          echo 'If you are using a "manual" build mode for one or more of the' \
+            'languages you are analyzing, replace this with the commands to build' \
+            'your code, for example:'
+          echo '  make bootstrap'
+          echo '  make release'
+          exit 1
+
+      - name: Perform CodeQL Analysis
+        uses: github/codeql-action/analyze@v3
+        with:
+          category: "/language:${{matrix.language}}"

.github/workflows/lock.yml

@@ -0,0 +1,28 @@
+---
+name: Lock
+
+on:
+  schedule:
+    - cron: "30 0 * * *"
+  workflow_dispatch:
+
+permissions:
+  issues: write
+  pull-requests: write
+
+concurrency:
+  group: lock
+
+jobs:
+  lock:
+    runs-on: ubuntu-latest
+    steps:
+      - uses: dessant/lock-threads@v5.0.1
+        with:
+          pr-inactive-days: "1"
+          pr-lock-reason: ""
+          exclude-any-pr-labels: keep-open
+
+          issue-inactive-days: "7"
+          issue-lock-reason: ""
+          exclude-any-issue-labels: keep-open

.github/workflows/matchers/ci-custom.json

@@ -0,0 +1,16 @@
+{
+    "problemMatcher": [
+        {
+            "owner": "ci-custom",
+            "pattern": [
+                {
+                    "regexp": "^(.*):(\\d+):(\\d+):\\s+lint:\\s+(.*)$",
+                    "file": 1,
+                    "line": 2,
+                    "column": 3,
+                    "message": 4
+                }
+            ]
+        }
+    ]
+}

.github/workflows/matchers/clang-tidy.json

@@ -0,0 +1,17 @@
+{
+    "problemMatcher": [
+        {
+            "owner": "clang-tidy",
+            "pattern": [
+                {
+                    "regexp": "^(.*):(\\d+):(\\d+):\\s+(error):\\s+(.*) \\[([a-z0-9,\\-]+)\\]\\s*$",
+                    "file": 1,
+                    "line": 2,
+                    "column": 3,
+                    "severity": 4,
+                    "message": 5
+                }
+            ]
+        }
+    ]
+}

.github/workflows/matchers/gcc.json

@@ -0,0 +1,18 @@
+{
+  "problemMatcher": [
+    {
+      "owner": "gcc",
+      "severity": "error",
+      "pattern": [
+        {
+          "regexp": "^src/(.*):(\\d+):(\\d+):\\s+(?:fatal\\s+)?(warning|error):\\s+(.*)$",
+          "file": 1,
+          "line": 2,
+          "column": 3,
+          "severity": 4,
+          "message": 5
+        }
+      ]
+    }
+  ]
+}

.github/workflows/matchers/lint-python.json

@@ -0,0 +1,39 @@
+{
+  "problemMatcher": [
+    {
+      "owner": "ruff",
+      "severity": "error",
+      "pattern": [
+        {
+          "regexp": "^(.*): (Please format this file with the ruff formatter)",
+          "file": 1,
+          "message": 2
+        }
+      ]
+    },
+    {
+      "owner": "flake8",
+      "severity": "error",
+      "pattern": [
+          {
+          "regexp": "^(.*):(\\d+): ([EFCDNW]\\d{3}.*)$",
+          "file": 1,
+          "line": 2,
+          "message": 3
+          }
+      ]
+    },
+    {
+      "owner": "pylint",
+      "severity": "error",
+      "pattern": [
+        {
+          "regexp": "^(.*):(\\d+): (\\[[EFCRW]\\d{4}\\(.*\\),.*\\].*)$",
+          "file": 1,
+          "line": 2,
+          "message": 3
+        }
+      ]
+    }
+  ]
+}

.github/workflows/matchers/pytest.json

@@ -0,0 +1,19 @@
+{
+  "problemMatcher": [
+    {
+      "owner": "pytest",
+      "fileLocation": "absolute",
+      "pattern": [
+        {
+          "regexp": "^\\s+File \"(.*)\", line (\\d+), in (.*)$",
+          "file": 1,
+          "line": 2
+        },
+        {
+          "regexp": "^\\s+(.*)$",
+          "message": 1
+        }
+      ]
+    }
+  ]
+}

.github/workflows/matchers/python.json

@@ -0,0 +1,18 @@
+{
+    "problemMatcher": [
+        {
+            "owner": "python",
+            "pattern": [
+                {
+                    "regexp": "^\\s*File\\s\\\"(.*)\\\",\\sline\\s(\\d+),\\sin\\s(.*)$",
+                    "file": 1,
+                    "line": 2
+                },
+                {
+                    "regexp": "^\\s*raise\\s(.*)\\(\\'(.*)\\'\\)$",
+                    "message": 2
+                }
+            ]
+        }
+    ]
+}

.github/workflows/needs-docs.yml

@@ -0,0 +1,24 @@
+name: Needs Docs
+
+on:
+  pull_request:
+    types: [labeled, unlabeled]
+
+jobs:
+  check:
+    name: Check
+    runs-on: ubuntu-latest
+    steps:
+      - name: Check for needs-docs label
+        uses: actions/github-script@v7.0.1
+        with:
+          script: |
+            const { data: labels } = await github.rest.issues.listLabelsOnIssue({
+              owner: context.repo.owner,
+              repo: context.repo.repo,
+              issue_number: context.issue.number
+            });
+            const needsDocs = labels.find(label => label.name === 'needs-docs');
+            if (needsDocs) {
+              core.setFailed('Pull request needs docs');
+            }

.github/workflows/release.yml

@@ -0,0 +1,245 @@
+---
+name: Publish Release
+
+on:
+  workflow_dispatch:
+  release:
+    types: [published]
+  schedule:
+    - cron: "0 2 * * *"
+
+permissions:
+  contents: read
+
+jobs:
+  init:
+    name: Initialize build
+    runs-on: ubuntu-latest
+    outputs:
+      tag: ${{ steps.tag.outputs.tag }}
+      branch_build: ${{ steps.tag.outputs.branch_build }}
+    steps:
+      - uses: actions/checkout@v4.1.7
+      - name: Get tag
+        id: tag
+        # yamllint disable rule:line-length
+        run: |
+          if [[ "${{ github.event_name }}" = "release" ]]; then
+            TAG="${{ github.event.release.tag_name}}"
+            BRANCH_BUILD="false"
+          else
+            TAG=$(cat esphome/const.py | sed -n -E "s/^__version__\s+=\s+\"(.+)\"$/\1/p")
+            today="$(date --utc '+%Y%m%d')"
+            TAG="${TAG}${today}"
+            BRANCH=${GITHUB_REF#refs/heads/}
+            if [[ "$BRANCH" != "dev" ]]; then
+              TAG="${TAG}-${BRANCH}"
+              BRANCH_BUILD="true"
+            else
+              BRANCH_BUILD="false"
+            fi
+          fi
+          echo "tag=${TAG}" >> $GITHUB_OUTPUT
+          echo "branch_build=${BRANCH_BUILD}" >> $GITHUB_OUTPUT
+        # yamllint enable rule:line-length
+
+  deploy-pypi:
+    name: Build and publish to PyPi
+    if: github.repository == 'esphome/esphome' && github.event_name == 'release'
+    runs-on: ubuntu-latest
+    permissions:
+      contents: read
+      id-token: write
+    steps:
+      - uses: actions/checkout@v4.1.7
+      - name: Set up Python
+        uses: actions/setup-python@v5.5.0
+        with:
+          python-version: "3.x"
+      - name: Set up python environment
+        env:
+          ESPHOME_NO_VENV: 1
+        run: script/setup
+      - name: Build
+        run: |-
+          pip3 install build
+          python3 -m build
+      - name: Publish
+        uses: pypa/gh-action-pypi-publish@v1.12.4
+
+  deploy-docker:
+    name: Build ESPHome ${{ matrix.platform }}
+    if: github.repository == 'esphome/esphome'
+    permissions:
+      contents: read
+      packages: write
+    runs-on: ubuntu-latest
+    needs: [init]
+    strategy:
+      fail-fast: false
+      matrix:
+        platform:
+          - linux/amd64
+          - linux/arm64
+    steps:
+      - uses: actions/checkout@v4.1.7
+      - name: Set up Python
+        uses: actions/setup-python@v5.5.0
+        with:
+          python-version: "3.9"
+
+      - name: Set up Docker Buildx
+        uses: docker/setup-buildx-action@v3.10.0
+      - name: Set up QEMU
+        if: matrix.platform != 'linux/amd64'
+        uses: docker/setup-qemu-action@v3.6.0
+
+      - name: Log in to docker hub
+        uses: docker/login-action@v3.4.0
+        with:
+          username: ${{ secrets.DOCKER_USER }}
+          password: ${{ secrets.DOCKER_PASSWORD }}
+      - name: Log in to the GitHub container registry
+        uses: docker/login-action@v3.4.0
+        with:
+          registry: ghcr.io
+          username: ${{ github.actor }}
+          password: ${{ secrets.GITHUB_TOKEN }}
+
+      - name: Build docker
+        uses: ./.github/actions/build-image
+        with:
+          platform: ${{ matrix.platform }}
+          target: docker
+          baseimg: docker
+          suffix: ""
+          version: ${{ needs.init.outputs.tag }}
+
+      - name: Build ha-addon
+        uses: ./.github/actions/build-image
+        with:
+          platform: ${{ matrix.platform }}
+          target: hassio
+          baseimg: hassio
+          suffix: "hassio"
+          version: ${{ needs.init.outputs.tag }}
+
+      - name: Build lint
+        uses: ./.github/actions/build-image
+        with:
+          platform: ${{ matrix.platform }}
+          target: lint
+          baseimg: docker
+          suffix: lint
+          version: ${{ needs.init.outputs.tag }}
+
+      - name: Sanitize platform name
+        id: sanitize
+        run: |
+          echo "${{ matrix.platform }}" | sed 's|/|-|g' > /tmp/platform
+          echo name=$(cat /tmp/platform) >> $GITHUB_OUTPUT
+
+      - name: Upload digests
+        uses: actions/upload-artifact@v4.6.2
+        with:
+          name: digests-${{ steps.sanitize.outputs.name }}
+          path: /tmp/digests
+          retention-days: 1
+
+  deploy-manifest:
+    name: Publish ESPHome ${{ matrix.image.title }} to ${{ matrix.registry }}
+    runs-on: ubuntu-latest
+    needs:
+      - init
+      - deploy-docker
+    if: github.repository == 'esphome/esphome'
+    permissions:
+      contents: read
+      packages: write
+    strategy:
+      fail-fast: false
+      matrix:
+        image:
+          - title: "ha-addon"
+            target: "hassio"
+            suffix: "hassio"
+          - title: "docker"
+            target: "docker"
+            suffix: ""
+          - title: "lint"
+            target: "lint"
+            suffix: "lint"
+        registry:
+          - ghcr
+          - dockerhub
+    steps:
+      - uses: actions/checkout@v4.1.7
+
+      - name: Download digests
+        uses: actions/download-artifact@v4.2.1
+        with:
+          pattern: digests-*
+          path: /tmp/digests
+          merge-multiple: true
+
+      - name: Set up Docker Buildx
+        uses: docker/setup-buildx-action@v3.10.0
+
+      - name: Log in to docker hub
+        if: matrix.registry == 'dockerhub'
+        uses: docker/login-action@v3.4.0
+        with:
+          username: ${{ secrets.DOCKER_USER }}
+          password: ${{ secrets.DOCKER_PASSWORD }}
+      - name: Log in to the GitHub container registry
+        if: matrix.registry == 'ghcr'
+        uses: docker/login-action@v3.4.0
+        with:
+          registry: ghcr.io
+          username: ${{ github.actor }}
+          password: ${{ secrets.GITHUB_TOKEN }}
+
+      - name: Generate short tags
+        id: tags
+        run: |
+          output=$(docker/generate_tags.py \
+            --tag "${{ needs.init.outputs.tag }}" \
+            --suffix "${{ matrix.image.suffix }}" \
+            --registry "${{ matrix.registry }}")
+          echo $output
+          for l in $output; do
+            echo $l >> $GITHUB_OUTPUT
+          done
+
+      - name: Create manifest list and push
+        working-directory: /tmp/digests/${{ matrix.image.target }}/${{ matrix.registry }}
+        run: |
+          docker buildx imagetools create $(jq -Rcnr 'inputs | . / "," | map("-t " + .) | join(" ")' <<< "${{ steps.tags.outputs.tags}}") \
+            $(printf '${{ steps.tags.outputs.image }}@sha256:%s ' *)
+
+  deploy-ha-addon-repo:
+    if: github.repository == 'esphome/esphome' && needs.init.outputs.branch_build == 'false'
+    runs-on: ubuntu-latest
+    needs:
+      - init
+      - deploy-manifest
+    steps:
+      - name: Trigger Workflow
+        uses: actions/github-script@v7.0.1
+        with:
+          github-token: ${{ secrets.DEPLOY_HA_ADDON_REPO_TOKEN }}
+          script: |
+            let description = "ESPHome";
+            if (context.eventName == "release") {
+              description = ${{ toJSON(github.event.release.body) }};
+            }
+            github.rest.actions.createWorkflowDispatch({
+              owner: "esphome",
+              repo: "home-assistant-addon",
+              workflow_id: "bump-version.yml",
+              ref: "main",
+              inputs: {
+                version: "${{ needs.init.outputs.tag }}",
+                content: description
+              }
+            })

.github/workflows/stale.yml

@@ -0,0 +1,50 @@
+---
+name: Stale
+
+on:
+  schedule:
+    - cron: "30 0 * * *"
+  workflow_dispatch:
+
+permissions:
+  issues: write
+  pull-requests: write
+
+concurrency:
+  group: lock
+
+jobs:
+  stale:
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/stale@v9.1.0
+        with:
+          days-before-pr-stale: 90
+          days-before-pr-close: 7
+          days-before-issue-stale: -1
+          days-before-issue-close: -1
+          remove-stale-when-updated: true
+          stale-pr-label: "stale"
+          exempt-pr-labels: "not-stale"
+          stale-pr-message: >
+            There hasn't been any activity on this pull request recently. This
+            pull request has been automatically marked as stale because of that
+            and will be closed if no further activity occurs within 7 days.
+            Thank you for your contributions.
+
+  # Use stale to automatically close issues with a
+  # reference to the issue tracker
+  close-issues:
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/stale@v9.1.0
+        with:
+          days-before-pr-stale: -1
+          days-before-pr-close: -1
+          days-before-issue-stale: 1
+          days-before-issue-close: 1
+          remove-stale-when-updated: true
+          stale-issue-label: "stale"
+          exempt-issue-labels: "not-stale"
+          stale-issue-message: >
+            https://github.com/esphome/esphome/issues/430

.github/workflows/sync-device-classes.yml

@@ -0,0 +1,48 @@
+---
+name: Synchronise Device Classes from Home Assistant
+
+on:
+  workflow_dispatch:
+  schedule:
+    - cron: "45 6 * * *"
+
+jobs:
+  sync:
+    name: Sync Device Classes
+    runs-on: ubuntu-latest
+    if: github.repository == 'esphome/esphome'
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v4.1.7
+
+      - name: Checkout Home Assistant
+        uses: actions/checkout@v4.1.7
+        with:
+          repository: home-assistant/core
+          path: lib/home-assistant
+
+      - name: Setup Python
+        uses: actions/setup-python@v5.5.0
+        with:
+          python-version: 3.12
+
+      - name: Install Home Assistant
+        run: |
+          python -m pip install --upgrade pip
+          pip install -e lib/home-assistant
+
+      - name: Sync
+        run: |
+          python ./script/sync-device_class.py
+
+      - name: Commit changes
+        uses: peter-evans/create-pull-request@v7.0.8
+        with:
+          commit-message: "Synchronise Device Classes from Home Assistant"
+          committer: esphomebot <esphome@openhomefoundation.org>
+          author: esphomebot <esphome@openhomefoundation.org>
+          branch: sync/device-classes
+          delete-branch: true
+          title: "Synchronise Device Classes from Home Assistant"
+          body-path: .github/PULL_REQUEST_TEMPLATE.md
+          token: ${{ secrets.DEVICE_CLASS_SYNC_TOKEN }}

.github/workflows/yaml-lint.yml

@@ -0,0 +1,25 @@
+---
+name: YAML lint
+
+on:
+  push:
+    branches: [dev, beta, release]
+    paths:
+      - "**.yaml"
+      - "**.yml"
+  pull_request:
+    paths:
+      - "**.yaml"
+      - "**.yml"
+
+jobs:
+  yamllint:
+    name: yamllint
+    runs-on: ubuntu-latest
+    steps:
+      - name: Check out code from GitHub
+        uses: actions/checkout@v4.1.7
+      - name: Run yamllint
+        uses: frenck/action-yamllint@v1.5.0
+        with:
+          strict: true

.gitignore

@@ -6,6 +6,31 @@ __pycache__/
 # C extensions
 *.so
 
+# Hide sublime text stuff
+*.sublime-project
+*.sublime-workspace
+
+# Intellij Idea
+.idea
+
+# Eclipse
+.project
+.cproject
+.pydevproject
+.settings/
+
+# Vim
+*.swp
+
+# Hide some OS X stuff
+.DS_Store
+.AppleDouble
+.LSOverride
+Icon
+
+# Thumbnails
+._*
+
 # Distribution / packaging
 .Python
 build/
@@ -25,12 +50,6 @@ wheels/
 *.egg
 MANIFEST
 
-# PyInstaller
-#  Usually these files are written by a python script from a template
-#  before PyInstaller builds the exe, so as to inject date/other infos into it.
-*.manifest
-*.spec
-
 # Installer logs
 pip-log.txt
 pip-delete-this-directory.txt
@@ -41,8 +60,10 @@ htmlcov/
 .coverage
 .coverage.*
 .cache
+.esphome
 nosetests.xml
 coverage.xml
+cov.xml
 *.cover
 .hypothesis/
 .pytest_cache/
@@ -51,35 +72,11 @@ coverage.xml
 *.mo
 *.pot
 
-# Django stuff:
-*.log
-local_settings.py
-db.sqlite3
-
-# Flask stuff:
-instance/
-.webassets-cache
-
-# Scrapy stuff:
-.scrapy
-
-# Sphinx documentation
-docs/_build/
-
-# PyBuilder
-target/
-
-# Jupyter Notebook
-.ipynb_checkpoints
-
 # pyenv
 .python-version
 
-# celery beat schedule file
-celerybeat-schedule
-
-# SageMath parsed files
-*.sage.py
+# asdf
+.tool-versions
 
 # Environments
 .env
@@ -89,20 +86,60 @@ venv/
 ENV/
 env.bak/
 venv.bak/
-
-# Spyder project settings
-.spyderproject
-.spyproject
-
-# Rope project settings
-.ropeproject
-
-# mkdocs documentation
-/site
+venv-*/
 
 # mypy
 .mypy_cache/
 
+.pioenvs
+.piolibdeps
+.pio
+.vscode/
+!.vscode/tasks.json
+CMakeListsPrivate.txt
+CMakeLists.txt
+
+# User-specific stuff:
+.idea/**/workspace.xml
+.idea/**/tasks.xml
+.idea/dictionaries
+
+# Sensitive or high-churn files:
+.idea/**/dataSources/
+.idea/**/dataSources.ids
+.idea/**/dataSources.xml
+.idea/**/dataSources.local.xml
+.idea/**/dynamic.xml
+
+# CMake
+cmake-build-*/
+
+CMakeCache.txt
+CMakeFiles
+CMakeScripts
+Testing
+Makefile
+cmake_install.cmake
+install_manifest.txt
+compile_commands.json
+CTestTestfile.cmake
+/*.cbp
+
+.clang_complete
+.gcc-flags.json
+
 config/
 tests/build/
 tests/.esphome/
+/.temp-clang-tidy.cpp
+/.temp/
+.pio/
+
+sdkconfig.*
+!sdkconfig.defaults
+
+.tests/
+
+/components
+/managed_components
+

.gitlab-ci.yml

@@ -1,347 +0,0 @@
----
-# Based on https://gitlab.com/hassio-addons/addon-node-red/blob/master/.gitlab-ci.yml
-variables:
-  DOCKER_DRIVER: overlay2
-  DOCKER_HOST: tcp://docker:2375/
-
-stages:
-  - lint
-  - test
-  - deploy
-
-.lint: &lint
-  image: esphome/esphome-base-amd64
-  stage: lint
-  before_script:
-    - pip install -e .
-    - pip install flake8==3.6.0 pylint==1.9.4 pillow
-  tags:
-    - docker
-
-.test: &test
-  image: esphome/esphome-base-amd64
-  stage: test
-  before_script:
-    - pip install -e .
-  tags:
-    - docker
-  variables:
-    TZ: UTC
-
-.docker-base: &docker-base
-  image: esphome/esphome-base-builder
-  before_script:
-    - docker info
-    - docker login -u "$DOCKER_USER" -p "$DOCKER_PASSWORD"
-  script:
-    - docker run --rm --privileged hassioaddons/qemu-user-static:latest
-    - TAG="${CI_COMMIT_TAG#v}"
-    - TAG="${TAG:-${CI_COMMIT_SHA:0:7}}"
-    - echo "Tag ${TAG}"
-
-    - |
-      if [[ "${IS_HASSIO}" == "YES" ]]; then
-        BUILD_FROM=esphome/esphome-hassio-base-${BUILD_ARCH}:1.2.1
-        BUILD_TO=esphome/esphome-hassio-${BUILD_ARCH}
-        DOCKERFILE=docker/Dockerfile.hassio
-      else
-        BUILD_FROM=esphome/esphome-base-${BUILD_ARCH}:1.2.1
-        if [[ "${BUILD_ARCH}" == "amd64" ]]; then
-          BUILD_TO=esphome/esphome
-        else
-          BUILD_TO=esphome/esphome-${BUILD_ARCH}
-        fi
-        DOCKERFILE=docker/Dockerfile
-      fi
-
-    - |
-      docker build \
-        --build-arg "BUILD_FROM=${BUILD_FROM}" \
-        --build-arg "BUILD_VERSION=${TAG}" \
-        --tag "${BUILD_TO}:${TAG}" \
-        --file "${DOCKERFILE}" \
-        .
-    - |
-      if [[ "${RELEASE}" = "YES" ]]; then
-        echo "Pushing to ${BUILD_TO}:${TAG}"
-        docker push "${BUILD_TO}:${TAG}"
-      fi
-    - |
-      if [[ "${LATEST}" = "YES" ]]; then
-        echo "Pushing to :latest"
-        docker tag ${BUILD_TO}:${TAG} ${BUILD_TO}:latest
-        docker push ${BUILD_TO}:latest
-      fi
-    - |
-      if [[ "${BETA}" = "YES" ]]; then
-        echo "Pushing to :beta"
-        docker tag \
-          ${BUILD_TO}:${TAG} \
-          ${BUILD_TO}:beta
-        docker push ${BUILD_TO}:beta
-      fi
-    - |
-      if [[ "${DEV}" = "YES" ]]; then
-        echo "Pushing to :dev"
-        docker tag \
-          ${BUILD_TO}:${TAG} \
-          ${BUILD_TO}:dev
-        docker push ${BUILD_TO}:dev
-      fi
-  services:
-    - docker:dind
-  tags:
-    - docker
-  stage: deploy
-
-flake8:
-  <<: *lint
-  script:
-    - flake8 esphome
-
-pylint:
-  <<: *lint
-  script:
-    - pylint esphome
-
-test1:
-  <<: *test
-  script:
-    - esphome tests/test1.yaml compile
-
-test2:
-  <<: *test
-  script:
-    - esphome tests/test2.yaml compile
-
-test3:
-  <<: *test
-  script:
-    - esphome tests/test3.yaml compile
-
-.deploy-pypi: &deploy-pypi
-  stage: deploy
-  image: python:2.7
-  before_script:
-  - pip install -e .
-  - pip install twine
-  script:
-  - python setup.py sdist
-  - twine upload dist/*
-  tags:
-  - docker
-
-deploy-release:pypi:
-  <<: *deploy-pypi
-  only:
-    - /^v\d+\.\d+\.\d+$/
-  except:
-    - /^(?!master).+@/
-
-deploy-beta:pypi:
-  <<: *deploy-pypi
-  only:
-    - /^v\d+\.\d+\.\d+b\d+$/
-  except:
-    - /^(?!rc).+@/
-
-.latest: &latest
-  <<: *docker-base
-  only:
-  - /^v([0-9\.]+)$/
-  except:
-  - branches
-
-.latest-vars: &latest-vars
-  RELEASE: YES
-  LATEST: YES
-  # Also push to beta tag
-  BETA: YES
-
-.beta: &beta
-  <<: *docker-base
-  only:
-  - /^v([0-9\.]+b\d+)$/
-  except:
-  - branches
-
-.beta-vars: &beta-vars
-  RELEASE: YES
-  BETA: YES
-
-.dev: &dev
-  <<: *docker-base
-  only:
-  - dev
-
-.dev-vars: &dev-vars
-  DEV: YES
-
-aarch64-beta-docker:
-  <<: *beta
-  variables:
-    BETA: "YES"
-    BUILD_ARCH: aarch64
-    IS_HASSIO: "NO"
-    RELEASE: "YES"
-aarch64-beta-hassio:
-  <<: *beta
-  variables:
-    BETA: "YES"
-    BUILD_ARCH: aarch64
-    IS_HASSIO: "YES"
-    RELEASE: "YES"
-aarch64-dev-docker:
-  <<: *dev
-  variables:
-    BUILD_ARCH: aarch64
-    DEV: "YES"
-    IS_HASSIO: "NO"
-aarch64-dev-hassio:
-  <<: *dev
-  variables:
-    BUILD_ARCH: aarch64
-    DEV: "YES"
-    IS_HASSIO: "YES"
-aarch64-latest-docker:
-  <<: *latest
-  variables:
-    BETA: "YES"
-    BUILD_ARCH: aarch64
-    IS_HASSIO: "NO"
-    LATEST: "YES"
-    RELEASE: "YES"
-aarch64-latest-hassio:
-  <<: *latest
-  variables:
-    BETA: "YES"
-    BUILD_ARCH: aarch64
-    IS_HASSIO: "YES"
-    LATEST: "YES"
-    RELEASE: "YES"
-amd64-beta-docker:
-  <<: *beta
-  variables:
-    BETA: "YES"
-    BUILD_ARCH: amd64
-    IS_HASSIO: "NO"
-    RELEASE: "YES"
-amd64-beta-hassio:
-  <<: *beta
-  variables:
-    BETA: "YES"
-    BUILD_ARCH: amd64
-    IS_HASSIO: "YES"
-    RELEASE: "YES"
-amd64-dev-docker:
-  <<: *dev
-  variables:
-    BUILD_ARCH: amd64
-    DEV: "YES"
-    IS_HASSIO: "NO"
-amd64-dev-hassio:
-  <<: *dev
-  variables:
-    BUILD_ARCH: amd64
-    DEV: "YES"
-    IS_HASSIO: "YES"
-amd64-latest-docker:
-  <<: *latest
-  variables:
-    BETA: "YES"
-    BUILD_ARCH: amd64
-    IS_HASSIO: "NO"
-    LATEST: "YES"
-    RELEASE: "YES"
-amd64-latest-hassio:
-  <<: *latest
-  variables:
-    BETA: "YES"
-    BUILD_ARCH: amd64
-    IS_HASSIO: "YES"
-    LATEST: "YES"
-    RELEASE: "YES"
-armhf-beta-docker:
-  <<: *beta
-  variables:
-    BETA: "YES"
-    BUILD_ARCH: armhf
-    IS_HASSIO: "NO"
-    RELEASE: "YES"
-armhf-beta-hassio:
-  <<: *beta
-  variables:
-    BETA: "YES"
-    BUILD_ARCH: armhf
-    IS_HASSIO: "YES"
-    RELEASE: "YES"
-armhf-dev-docker:
-  <<: *dev
-  variables:
-    BUILD_ARCH: armhf
-    DEV: "YES"
-    IS_HASSIO: "NO"
-armhf-dev-hassio:
-  <<: *dev
-  variables:
-    BUILD_ARCH: armhf
-    DEV: "YES"
-    IS_HASSIO: "YES"
-armhf-latest-docker:
-  <<: *latest
-  variables:
-    BETA: "YES"
-    BUILD_ARCH: armhf
-    IS_HASSIO: "NO"
-    LATEST: "YES"
-    RELEASE: "YES"
-armhf-latest-hassio:
-  <<: *latest
-  variables:
-    BETA: "YES"
-    BUILD_ARCH: armhf
-    IS_HASSIO: "YES"
-    LATEST: "YES"
-    RELEASE: "YES"
-i386-beta-docker:
-  <<: *beta
-  variables:
-    BETA: "YES"
-    BUILD_ARCH: i386
-    IS_HASSIO: "NO"
-    RELEASE: "YES"
-i386-beta-hassio:
-  <<: *beta
-  variables:
-    BETA: "YES"
-    BUILD_ARCH: i386
-    IS_HASSIO: "YES"
-    RELEASE: "YES"
-i386-dev-docker:
-  <<: *dev
-  variables:
-    BUILD_ARCH: i386
-    DEV: "YES"
-    IS_HASSIO: "NO"
-i386-dev-hassio:
-  <<: *dev
-  variables:
-    BUILD_ARCH: i386
-    DEV: "YES"
-    IS_HASSIO: "YES"
-i386-latest-docker:
-  <<: *latest
-  variables:
-    BETA: "YES"
-    BUILD_ARCH: i386
-    IS_HASSIO: "NO"
-    LATEST: "YES"
-    RELEASE: "YES"
-i386-latest-hassio:
-  <<: *latest
-  variables:
-    BETA: "YES"
-    BUILD_ARCH: i386
-    IS_HASSIO: "YES"
-    LATEST: "YES"
-    RELEASE: "YES"

.pre-commit-config.yaml

@@ -0,0 +1,50 @@
+---
+# See https://pre-commit.com for more information
+# See https://pre-commit.com/hooks.html for more hooks
+repos:
+  - repo: https://github.com/astral-sh/ruff-pre-commit
+    # Ruff version.
+    rev: v0.11.0
+    hooks:
+      # Run the linter.
+      - id: ruff
+        args: [--fix]
+      # Run the formatter.
+      - id: ruff-format
+  - repo: https://github.com/PyCQA/flake8
+    rev: 7.2.0
+    hooks:
+      - id: flake8
+        additional_dependencies:
+          - flake8-docstrings==1.7.0
+          - pydocstyle==5.1.1
+        files: ^(esphome|tests)/.+\.py$
+  - repo: https://github.com/pre-commit/pre-commit-hooks
+    rev: v3.4.0
+    hooks:
+      - id: no-commit-to-branch
+        args:
+          - --branch=dev
+          - --branch=release
+          - --branch=beta
+  - repo: https://github.com/asottile/pyupgrade
+    rev: v3.15.2
+    hooks:
+      - id: pyupgrade
+        args: [--py39-plus]
+  - repo: https://github.com/adrienverge/yamllint.git
+    rev: v1.35.1
+    hooks:
+      - id: yamllint
+  - repo: https://github.com/pre-commit/mirrors-clang-format
+    rev: v13.0.1
+    hooks:
+      - id: clang-format
+        types_or: [c, c++]
+  - repo: local
+    hooks:
+      - id: pylint
+        name: pylint
+        entry: python3 script/run-in-env.py pylint
+        language: system
+        types: [python]

.travis.yml

@@ -1,31 +0,0 @@
-sudo: false
-language: python
-
-matrix:
-  fast_finish: true
-  include:
-    - python: "2.7"
-      env: TARGET=Lint2.7
-      install: pip install -e . && pip install flake8==3.6.0 pylint==1.9.4 pillow
-      script:
-        - flake8 esphome
-        - pylint esphome
-    - python: "3.5.3"
-      env: TARGET=Lint3.5
-      install: pip install -U https://github.com/platformio/platformio-core/archive/develop.zip && pip install -e . && pip install flake8==3.6.0 pylint==2.2.2 pillow
-      script:
-        - flake8 esphome
-        - pylint esphome
-    - python: "2.7"
-      env: TARGET=Test2.7
-      install: pip install -e . && pip install flake8==3.6.0 pylint==1.9.4 pillow
-      script:
-        - esphome tests/test1.yaml compile
-        - esphome tests/test2.yaml compile
-        - esphome tests/test3.yaml compile
-    #- python: "3.5.3"
-    #  env: TARGET=Test3.5
-    #  install: pip install -U https://github.com/platformio/platformio-core/archive/develop.zip && pip install -e . && pip install flake8==3.6.0 pylint==2.2.2 pillow
-    #  script:
-    #    - esphome tests/test1.yaml compile
-    #    - esphome tests/test2.yaml compile

.vscode/tasks.json

@@ -0,0 +1,59 @@
+{
+  "version": "2.0.0",
+  "tasks": [
+    {
+      "label": "Run Dashboard",
+      "type": "shell",
+      "command": "${command:python.interpreterPath}",
+      "args": [
+        "-m",
+        "esphome",
+        "dashboard",
+        "config/"
+      ],
+      "problemMatcher": []
+    },
+    {
+      "label": "clang-tidy",
+      "type": "shell",
+      "command": "${command:python.interpreterPath}",
+      "args": [
+        "./script/clang-tidy"
+      ],
+      "problemMatcher": [
+        {
+          "owner": "clang-tidy",
+          "fileLocation": "absolute",
+          "pattern": [
+            {
+              "regexp": "^(.*):(\\d+):(\\d+):\\s+(error):\\s+(.*) \\[([a-z0-9,\\-]+)\\]\\s*$",
+              "file": 1,
+              "line": 2,
+              "column": 3,
+              "severity": 4,
+              "message": 5
+            }
+          ]
+        }
+      ]
+    },
+    {
+      "label": "Generate proto files",
+      "type": "shell",
+      "command": "${command:python.interpreterPath}",
+      "args": [
+        "./script/api_protobuf/api_protobuf.py"
+      ],
+      "group": {
+        "kind": "build",
+        "isDefault": true
+      },
+      "presentation": {
+        "reveal": "never",
+        "close": true,
+        "panel": "new"
+      },
+      "problemMatcher": []
+    }
+  ]
+}

.yamllint

@@ -0,0 +1,19 @@
+---
+extends: default
+
+ignore-from-file: .gitignore
+
+rules:
+  document-start: disable
+  empty-lines:
+    level: error
+    max: 1
+    max-start: 0
+    max-end: 1
+  indentation:
+    level: error
+    spaces: 2
+    indent-sequences: true
+    check-multi-line-strings: false
+  line-length: disable
+  truthy: disable

CODEOWNERS

@@ -0,0 +1,513 @@
+# This file is generated by script/build_codeowners.py
+# People marked here will be automatically requested for a review
+# when the code that they own is touched.
+#
+# Every time an issue is created with a label corresponding to an integration,
+# the integration's code owner is automatically notified.
+
+# Core Code
+pyproject.toml @esphome/core
+esphome/*.py @esphome/core
+esphome/core/* @esphome/core
+
+# Integrations
+esphome/components/a01nyub/* @MrSuicideParrot
+esphome/components/a02yyuw/* @TH-Braemer
+esphome/components/absolute_humidity/* @DAVe3283
+esphome/components/ac_dimmer/* @glmnet
+esphome/components/adc/* @esphome/core
+esphome/components/adc128s102/* @DeerMaximum
+esphome/components/addressable_light/* @justfalter
+esphome/components/ade7880/* @kpfleming
+esphome/components/ade7953/* @angelnu
+esphome/components/ade7953_i2c/* @angelnu
+esphome/components/ade7953_spi/* @angelnu
+esphome/components/ads1118/* @solomondg1
+esphome/components/ags10/* @mak-42
+esphome/components/aic3204/* @kbx81
+esphome/components/airthings_ble/* @jeromelaban
+esphome/components/airthings_wave_base/* @jeromelaban @kpfleming @ncareau
+esphome/components/airthings_wave_mini/* @ncareau
+esphome/components/airthings_wave_plus/* @jeromelaban
+esphome/components/alarm_control_panel/* @grahambrown11 @hwstar
+esphome/components/alpha3/* @jan-hofmeier
+esphome/components/am2315c/* @swoboda1337
+esphome/components/am43/* @buxtronix
+esphome/components/am43/cover/* @buxtronix
+esphome/components/am43/sensor/* @buxtronix
+esphome/components/analog_threshold/* @ianchi
+esphome/components/animation/* @syndlex
+esphome/components/anova/* @buxtronix
+esphome/components/apds9306/* @aodrenah
+esphome/components/api/* @OttoWinter
+esphome/components/as5600/* @ammmze
+esphome/components/as5600/sensor/* @ammmze
+esphome/components/as7341/* @mrgnr
+esphome/components/async_tcp/* @OttoWinter
+esphome/components/at581x/* @X-Ryl669
+esphome/components/atc_mithermometer/* @ahpohl
+esphome/components/atm90e26/* @danieltwagner
+esphome/components/atm90e32/* @circuitsetup @descipher
+esphome/components/audio/* @kahrendt
+esphome/components/audio_adc/* @kbx81
+esphome/components/audio_dac/* @kbx81
+esphome/components/axs15231/* @clydebarrow
+esphome/components/b_parasite/* @rbaron
+esphome/components/ballu/* @bazuchan
+esphome/components/bang_bang/* @OttoWinter
+esphome/components/bedjet/* @jhansche
+esphome/components/bedjet/climate/* @jhansche
+esphome/components/bedjet/fan/* @jhansche
+esphome/components/bedjet/sensor/* @javawizard @jhansche
+esphome/components/beken_spi_led_strip/* @Mat931
+esphome/components/bh1750/* @OttoWinter
+esphome/components/binary_sensor/* @esphome/core
+esphome/components/bk72xx/* @kuba2k2
+esphome/components/bl0906/* @athom-tech @jesserockz @tarontop
+esphome/components/bl0939/* @ziceva
+esphome/components/bl0940/* @tobias-
+esphome/components/bl0942/* @dbuezas @dwmw2
+esphome/components/ble_client/* @buxtronix @clydebarrow
+esphome/components/bluetooth_proxy/* @jesserockz
+esphome/components/bme280_base/* @esphome/core
+esphome/components/bme280_spi/* @apbodrov
+esphome/components/bme680_bsec/* @trvrnrth
+esphome/components/bme68x_bsec2/* @kbx81 @neffs
+esphome/components/bme68x_bsec2_i2c/* @kbx81 @neffs
+esphome/components/bmi160/* @flaviut
+esphome/components/bmp280_base/* @ademuri
+esphome/components/bmp280_i2c/* @ademuri
+esphome/components/bmp280_spi/* @ademuri
+esphome/components/bmp3xx/* @latonita
+esphome/components/bmp3xx_base/* @latonita @martgras
+esphome/components/bmp3xx_i2c/* @latonita
+esphome/components/bmp3xx_spi/* @latonita
+esphome/components/bmp581/* @kahrendt
+esphome/components/bp1658cj/* @Cossid
+esphome/components/bp5758d/* @Cossid
+esphome/components/button/* @esphome/core
+esphome/components/bytebuffer/* @clydebarrow
+esphome/components/canbus/* @danielschramm @mvturnho
+esphome/components/cap1188/* @mreditor97
+esphome/components/captive_portal/* @OttoWinter
+esphome/components/ccs811/* @habbie
+esphome/components/cd74hc4067/* @asoehlke
+esphome/components/ch422g/* @clydebarrow @jesterret
+esphome/components/chsc6x/* @kkosik20
+esphome/components/climate/* @esphome/core
+esphome/components/climate_ir/* @glmnet
+esphome/components/color_temperature/* @jesserockz
+esphome/components/combination/* @Cat-Ion @kahrendt
+esphome/components/coolix/* @glmnet
+esphome/components/copy/* @OttoWinter
+esphome/components/cover/* @esphome/core
+esphome/components/cs5460a/* @balrog-kun
+esphome/components/cse7761/* @berfenger
+esphome/components/cst226/* @clydebarrow
+esphome/components/cst816/* @clydebarrow
+esphome/components/ct_clamp/* @jesserockz
+esphome/components/current_based/* @djwmarcx
+esphome/components/dac7678/* @NickB1
+esphome/components/daikin_arc/* @MagicBear
+esphome/components/daikin_brc/* @hagak
+esphome/components/dallas_temp/* @ssieb
+esphome/components/daly_bms/* @s1lvi0
+esphome/components/dashboard_import/* @esphome/core
+esphome/components/datetime/* @jesserockz @rfdarter
+esphome/components/debug/* @OttoWinter
+esphome/components/delonghi/* @grob6000
+esphome/components/dfplayer/* @glmnet
+esphome/components/dfrobot_sen0395/* @niklasweber
+esphome/components/dht/* @OttoWinter
+esphome/components/display_menu_base/* @numo68
+esphome/components/dps310/* @kbx81
+esphome/components/ds1307/* @badbadc0ffee
+esphome/components/dsmr/* @glmnet @zuidwijk
+esphome/components/duty_time/* @dudanov
+esphome/components/ee895/* @Stock-M
+esphome/components/ektf2232/touchscreen/* @jesserockz
+esphome/components/emc2101/* @ellull
+esphome/components/emmeti/* @E440QF
+esphome/components/ens160/* @latonita
+esphome/components/ens160_base/* @latonita @vincentscode
+esphome/components/ens160_i2c/* @latonita
+esphome/components/ens160_spi/* @latonita
+esphome/components/ens210/* @itn3rd77
+esphome/components/es7210/* @kahrendt
+esphome/components/es7243e/* @kbx81
+esphome/components/es8156/* @kbx81
+esphome/components/es8311/* @kahrendt @kroimon
+esphome/components/esp32/* @esphome/core
+esphome/components/esp32_ble/* @Rapsssito @jesserockz
+esphome/components/esp32_ble_client/* @jesserockz
+esphome/components/esp32_ble_server/* @Rapsssito @clydebarrow @jesserockz
+esphome/components/esp32_camera_web_server/* @ayufan
+esphome/components/esp32_can/* @Sympatron
+esphome/components/esp32_improv/* @jesserockz
+esphome/components/esp32_rmt/* @jesserockz
+esphome/components/esp32_rmt_led_strip/* @jesserockz
+esphome/components/esp8266/* @esphome/core
+esphome/components/ethernet_info/* @gtjadsonsantos
+esphome/components/event/* @nohat
+esphome/components/event_emitter/* @Rapsssito
+esphome/components/exposure_notifications/* @OttoWinter
+esphome/components/ezo/* @ssieb
+esphome/components/ezo_pmp/* @carlos-sarmiento
+esphome/components/factory_reset/* @anatoly-savchenkov
+esphome/components/fastled_base/* @OttoWinter
+esphome/components/feedback/* @ianchi
+esphome/components/fingerprint_grow/* @OnFreund @alexborro @loongyh
+esphome/components/font/* @clydebarrow @esphome/core
+esphome/components/fs3000/* @kahrendt
+esphome/components/ft5x06/* @clydebarrow
+esphome/components/ft63x6/* @gpambrozio
+esphome/components/gcja5/* @gcormier
+esphome/components/gdk101/* @Szewcson
+esphome/components/globals/* @esphome/core
+esphome/components/gp2y1010au0f/* @zry98
+esphome/components/gp8403/* @jesserockz
+esphome/components/gpio/* @esphome/core
+esphome/components/gpio/one_wire/* @ssieb
+esphome/components/gps/* @coogle
+esphome/components/graph/* @synco
+esphome/components/graphical_display_menu/* @MrMDavidson
+esphome/components/gree/* @orestismers
+esphome/components/grove_gas_mc_v2/* @YorkshireIoT
+esphome/components/grove_tb6612fng/* @max246
+esphome/components/growatt_solar/* @leeuwte
+esphome/components/gt911/* @clydebarrow @jesserockz
+esphome/components/haier/* @paveldn
+esphome/components/haier/binary_sensor/* @paveldn
+esphome/components/haier/button/* @paveldn
+esphome/components/haier/sensor/* @paveldn
+esphome/components/haier/switch/* @paveldn
+esphome/components/haier/text_sensor/* @paveldn
+esphome/components/havells_solar/* @sourabhjaiswal
+esphome/components/hbridge/fan/* @WeekendWarrior
+esphome/components/hbridge/light/* @DotNetDann
+esphome/components/hbridge/switch/* @dwmw2
+esphome/components/he60r/* @clydebarrow
+esphome/components/heatpumpir/* @rob-deutsch
+esphome/components/hitachi_ac424/* @sourabhjaiswal
+esphome/components/hm3301/* @freekode
+esphome/components/hmac_md5/* @dwmw2
+esphome/components/homeassistant/* @OttoWinter @esphome/core
+esphome/components/homeassistant/number/* @landonr
+esphome/components/homeassistant/switch/* @Links2004
+esphome/components/honeywell_hih_i2c/* @Benichou34
+esphome/components/honeywellabp/* @RubyBailey
+esphome/components/honeywellabp2_i2c/* @jpfaff
+esphome/components/host/* @clydebarrow @esphome/core
+esphome/components/host/time/* @clydebarrow
+esphome/components/hrxl_maxsonar_wr/* @netmikey
+esphome/components/hte501/* @Stock-M
+esphome/components/http_request/ota/* @oarcher
+esphome/components/http_request/update/* @jesserockz
+esphome/components/htu31d/* @betterengineering
+esphome/components/hydreon_rgxx/* @functionpointer
+esphome/components/hyt271/* @Philippe12
+esphome/components/i2c/* @esphome/core
+esphome/components/i2c_device/* @gabest11
+esphome/components/i2s_audio/* @jesserockz
+esphome/components/i2s_audio/media_player/* @jesserockz
+esphome/components/i2s_audio/microphone/* @jesserockz
+esphome/components/i2s_audio/speaker/* @jesserockz @kahrendt
+esphome/components/iaqcore/* @yozik04
+esphome/components/ili9xxx/* @clydebarrow @nielsnl68
+esphome/components/improv_base/* @esphome/core
+esphome/components/improv_serial/* @esphome/core
+esphome/components/ina226/* @Sergio303 @latonita
+esphome/components/ina260/* @mreditor97
+esphome/components/ina2xx_base/* @latonita
+esphome/components/ina2xx_i2c/* @latonita
+esphome/components/ina2xx_spi/* @latonita
+esphome/components/inkbird_ibsth1_mini/* @fkirill
+esphome/components/inkplate6/* @jesserockz
+esphome/components/integration/* @OttoWinter
+esphome/components/internal_temperature/* @Mat931
+esphome/components/interval/* @esphome/core
+esphome/components/jsn_sr04t/* @Mafus1
+esphome/components/json/* @OttoWinter
+esphome/components/kamstrup_kmp/* @cfeenstra1024
+esphome/components/key_collector/* @ssieb
+esphome/components/key_provider/* @ssieb
+esphome/components/kuntze/* @ssieb
+esphome/components/lcd_menu/* @numo68
+esphome/components/ld2410/* @regevbr @sebcaps
+esphome/components/ld2420/* @descipher
+esphome/components/ld2450/* @hareeshmu
+esphome/components/ledc/* @OttoWinter
+esphome/components/libretiny/* @kuba2k2
+esphome/components/libretiny_pwm/* @kuba2k2
+esphome/components/light/* @esphome/core
+esphome/components/lightwaverf/* @max246
+esphome/components/lilygo_t5_47/touchscreen/* @jesserockz
+esphome/components/lock/* @esphome/core
+esphome/components/logger/* @esphome/core
+esphome/components/logger/select/* @clydebarrow
+esphome/components/ltr390/* @latonita @sjtrny
+esphome/components/ltr501/* @latonita
+esphome/components/ltr_als_ps/* @latonita
+esphome/components/lvgl/* @clydebarrow
+esphome/components/m5stack_8angle/* @rnauber
+esphome/components/mapping/* @clydebarrow
+esphome/components/matrix_keypad/* @ssieb
+esphome/components/max17043/* @blacknell
+esphome/components/max31865/* @DAVe3283
+esphome/components/max44009/* @berfenger
+esphome/components/max6956/* @looping40
+esphome/components/max7219digit/* @rspaargaren
+esphome/components/max9611/* @mckaymatthew
+esphome/components/mcp23008/* @jesserockz
+esphome/components/mcp23017/* @jesserockz
+esphome/components/mcp23s08/* @SenexCrenshaw @jesserockz
+esphome/components/mcp23s17/* @SenexCrenshaw @jesserockz
+esphome/components/mcp23x08_base/* @jesserockz
+esphome/components/mcp23x17_base/* @jesserockz
+esphome/components/mcp23xxx_base/* @jesserockz
+esphome/components/mcp2515/* @danielschramm @mvturnho
+esphome/components/mcp3204/* @rsumner
+esphome/components/mcp4461/* @p1ngb4ck
+esphome/components/mcp4728/* @berfenger
+esphome/components/mcp47a1/* @jesserockz
+esphome/components/mcp9600/* @mreditor97
+esphome/components/mcp9808/* @k7hpn
+esphome/components/md5/* @esphome/core
+esphome/components/mdns/* @esphome/core
+esphome/components/media_player/* @jesserockz
+esphome/components/micro_wake_word/* @jesserockz @kahrendt
+esphome/components/micronova/* @jorre05
+esphome/components/microphone/* @jesserockz
+esphome/components/mics_4514/* @jesserockz
+esphome/components/midea/* @dudanov
+esphome/components/midea_ir/* @dudanov
+esphome/components/mitsubishi/* @RubyBailey
+esphome/components/mixer/speaker/* @kahrendt
+esphome/components/mlx90393/* @functionpointer
+esphome/components/mlx90614/* @jesserockz
+esphome/components/mmc5603/* @benhoff
+esphome/components/mmc5983/* @agoode
+esphome/components/modbus_controller/* @martgras
+esphome/components/modbus_controller/binary_sensor/* @martgras
+esphome/components/modbus_controller/number/* @martgras
+esphome/components/modbus_controller/output/* @martgras
+esphome/components/modbus_controller/select/* @martgras @stegm
+esphome/components/modbus_controller/sensor/* @martgras
+esphome/components/modbus_controller/switch/* @martgras
+esphome/components/modbus_controller/text_sensor/* @martgras
+esphome/components/mopeka_ble/* @Fabian-Schmidt @spbrogan
+esphome/components/mopeka_pro_check/* @spbrogan
+esphome/components/mopeka_std_check/* @Fabian-Schmidt
+esphome/components/mpl3115a2/* @kbickar
+esphome/components/mpu6886/* @fabaff
+esphome/components/ms8607/* @e28eta
+esphome/components/msa3xx/* @latonita
+esphome/components/nau7802/* @cujomalainey
+esphome/components/network/* @esphome/core
+esphome/components/nextion/* @edwardtfn @senexcrenshaw
+esphome/components/nextion/binary_sensor/* @senexcrenshaw
+esphome/components/nextion/sensor/* @senexcrenshaw
+esphome/components/nextion/switch/* @senexcrenshaw
+esphome/components/nextion/text_sensor/* @senexcrenshaw
+esphome/components/nfc/* @jesserockz @kbx81
+esphome/components/noblex/* @AGalfra
+esphome/components/npi19/* @bakerkj
+esphome/components/number/* @esphome/core
+esphome/components/one_wire/* @ssieb
+esphome/components/online_image/* @clydebarrow @guillempages
+esphome/components/opentherm/* @olegtarasov
+esphome/components/ota/* @esphome/core
+esphome/components/output/* @esphome/core
+esphome/components/pca6416a/* @Mat931
+esphome/components/pca9554/* @clydebarrow @hwstar
+esphome/components/pcf85063/* @brogon
+esphome/components/pcf8563/* @KoenBreeman
+esphome/components/pid/* @OttoWinter
+esphome/components/pipsolar/* @andreashergert1984
+esphome/components/pm1006/* @habbie
+esphome/components/pm2005/* @andrewjswan
+esphome/components/pmsa003i/* @sjtrny
+esphome/components/pmwcs3/* @SeByDocKy
+esphome/components/pn532/* @OttoWinter @jesserockz
+esphome/components/pn532_i2c/* @OttoWinter @jesserockz
+esphome/components/pn532_spi/* @OttoWinter @jesserockz
+esphome/components/pn7150/* @jesserockz @kbx81
+esphome/components/pn7150_i2c/* @jesserockz @kbx81
+esphome/components/pn7160/* @jesserockz @kbx81
+esphome/components/pn7160_i2c/* @jesserockz @kbx81
+esphome/components/pn7160_spi/* @jesserockz @kbx81
+esphome/components/power_supply/* @esphome/core
+esphome/components/preferences/* @esphome/core
+esphome/components/psram/* @esphome/core
+esphome/components/pulse_meter/* @TrentHouliston @cstaahl @stevebaxter
+esphome/components/pvvx_mithermometer/* @pasiz
+esphome/components/pylontech/* @functionpointer
+esphome/components/qmp6988/* @andrewpc
+esphome/components/qr_code/* @wjtje
+esphome/components/qspi_dbi/* @clydebarrow
+esphome/components/qwiic_pir/* @kahrendt
+esphome/components/radon_eye_ble/* @jeffeb3
+esphome/components/radon_eye_rd200/* @jeffeb3
+esphome/components/rc522/* @glmnet
+esphome/components/rc522_i2c/* @glmnet
+esphome/components/rc522_spi/* @glmnet
+esphome/components/resampler/speaker/* @kahrendt
+esphome/components/restart/* @esphome/core
+esphome/components/rf_bridge/* @jesserockz
+esphome/components/rgbct/* @jesserockz
+esphome/components/rp2040/* @jesserockz
+esphome/components/rp2040_pio_led_strip/* @Papa-DMan
+esphome/components/rp2040_pwm/* @jesserockz
+esphome/components/rpi_dpi_rgb/* @clydebarrow
+esphome/components/rtl87xx/* @kuba2k2
+esphome/components/rtttl/* @glmnet
+esphome/components/safe_mode/* @jsuanet @kbx81 @paulmonigatti
+esphome/components/scd4x/* @martgras @sjtrny
+esphome/components/script/* @esphome/core
+esphome/components/sdl/* @bdm310 @clydebarrow
+esphome/components/sdm_meter/* @jesserockz @polyfaces
+esphome/components/sdp3x/* @Azimath
+esphome/components/seeed_mr24hpc1/* @limengdu
+esphome/components/seeed_mr60bha2/* @limengdu
+esphome/components/seeed_mr60fda2/* @limengdu
+esphome/components/selec_meter/* @sourabhjaiswal
+esphome/components/select/* @esphome/core
+esphome/components/sen0321/* @notjj
+esphome/components/sen21231/* @shreyaskarnik
+esphome/components/sen5x/* @martgras
+esphome/components/sensirion_common/* @martgras
+esphome/components/sensor/* @esphome/core
+esphome/components/sfa30/* @ghsensdev
+esphome/components/sgp40/* @SenexCrenshaw
+esphome/components/sgp4x/* @SenexCrenshaw @martgras
+esphome/components/shelly_dimmer/* @edge90 @rnauber
+esphome/components/sht3xd/* @mrtoy-me
+esphome/components/sht4x/* @sjtrny
+esphome/components/shutdown/* @esphome/core @jsuanet
+esphome/components/sigma_delta_output/* @Cat-Ion
+esphome/components/sim800l/* @glmnet
+esphome/components/sm10bit_base/* @Cossid
+esphome/components/sm2135/* @BoukeHaarsma23 @dd32 @matika77
+esphome/components/sm2235/* @Cossid
+esphome/components/sm2335/* @Cossid
+esphome/components/sml/* @alengwenus
+esphome/components/smt100/* @piechade
+esphome/components/sn74hc165/* @jesserockz
+esphome/components/socket/* @esphome/core
+esphome/components/sonoff_d1/* @anatoly-savchenkov
+esphome/components/speaker/* @jesserockz @kahrendt
+esphome/components/speaker/media_player/* @kahrendt @synesthesiam
+esphome/components/spi/* @clydebarrow @esphome/core
+esphome/components/spi_device/* @clydebarrow
+esphome/components/spi_led_strip/* @clydebarrow
+esphome/components/sprinkler/* @kbx81
+esphome/components/sps30/* @martgras
+esphome/components/ssd1322_base/* @kbx81
+esphome/components/ssd1322_spi/* @kbx81
+esphome/components/ssd1325_base/* @kbx81
+esphome/components/ssd1325_spi/* @kbx81
+esphome/components/ssd1327_base/* @kbx81
+esphome/components/ssd1327_i2c/* @kbx81
+esphome/components/ssd1327_spi/* @kbx81
+esphome/components/ssd1331_base/* @kbx81
+esphome/components/ssd1331_spi/* @kbx81
+esphome/components/ssd1351_base/* @kbx81
+esphome/components/ssd1351_spi/* @kbx81
+esphome/components/st7567_base/* @latonita
+esphome/components/st7567_i2c/* @latonita
+esphome/components/st7567_spi/* @latonita
+esphome/components/st7701s/* @clydebarrow
+esphome/components/st7735/* @SenexCrenshaw
+esphome/components/st7789v/* @kbx81
+esphome/components/st7920/* @marsjan155
+esphome/components/statsd/* @Links2004
+esphome/components/substitutions/* @esphome/core
+esphome/components/sun/* @OttoWinter
+esphome/components/sun_gtil2/* @Mat931
+esphome/components/switch/* @esphome/core
+esphome/components/switch/binary_sensor/* @ssieb
+esphome/components/t6615/* @tylermenezes
+esphome/components/tc74/* @sethgirvan
+esphome/components/tca9548a/* @andreashergert1984
+esphome/components/tca9555/* @mobrembski
+esphome/components/tcl112/* @glmnet
+esphome/components/tee501/* @Stock-M
+esphome/components/teleinfo/* @0hax
+esphome/components/tem3200/* @bakerkj
+esphome/components/template/alarm_control_panel/* @grahambrown11 @hwstar
+esphome/components/template/datetime/* @rfdarter
+esphome/components/template/event/* @nohat
+esphome/components/template/fan/* @ssieb
+esphome/components/text/* @mauritskorse
+esphome/components/thermostat/* @kbx81
+esphome/components/time/* @OttoWinter
+esphome/components/tlc5947/* @rnauber
+esphome/components/tlc5971/* @IJIJI
+esphome/components/tm1621/* @Philippe12
+esphome/components/tm1637/* @glmnet
+esphome/components/tm1638/* @skykingjwc
+esphome/components/tm1651/* @freekode
+esphome/components/tmp102/* @timsavage
+esphome/components/tmp1075/* @sybrenstuvel
+esphome/components/tmp117/* @Azimath
+esphome/components/tof10120/* @wstrzalka
+esphome/components/tormatic/* @ti-mo
+esphome/components/toshiba/* @kbx81
+esphome/components/touchscreen/* @jesserockz @nielsnl68
+esphome/components/tsl2591/* @wjcarpenter
+esphome/components/tt21100/* @kroimon
+esphome/components/tuya/binary_sensor/* @jesserockz
+esphome/components/tuya/climate/* @jesserockz
+esphome/components/tuya/number/* @frankiboy1
+esphome/components/tuya/select/* @bearpawmaxim
+esphome/components/tuya/sensor/* @jesserockz
+esphome/components/tuya/switch/* @jesserockz
+esphome/components/tuya/text_sensor/* @dentra
+esphome/components/uart/* @esphome/core
+esphome/components/uart/button/* @ssieb
+esphome/components/udp/* @clydebarrow
+esphome/components/ufire_ec/* @pvizeli
+esphome/components/ufire_ise/* @pvizeli
+esphome/components/ultrasonic/* @OttoWinter
+esphome/components/update/* @jesserockz
+esphome/components/uponor_smatrix/* @kroimon
+esphome/components/valve/* @esphome/core
+esphome/components/vbus/* @ssieb
+esphome/components/veml3235/* @kbx81
+esphome/components/veml7700/* @latonita
+esphome/components/version/* @esphome/core
+esphome/components/voice_assistant/* @jesserockz
+esphome/components/wake_on_lan/* @clydebarrow @willwill2will54
+esphome/components/watchdog/* @oarcher
+esphome/components/waveshare_epaper/* @clydebarrow
+esphome/components/web_server_base/* @OttoWinter
+esphome/components/web_server_idf/* @dentra
+esphome/components/weikai/* @DrCoolZic
+esphome/components/weikai_i2c/* @DrCoolZic
+esphome/components/weikai_spi/* @DrCoolZic
+esphome/components/whirlpool/* @glmnet
+esphome/components/whynter/* @aeonsablaze
+esphome/components/wiegand/* @ssieb
+esphome/components/wireguard/* @droscy @lhoracek @thomas0bernard
+esphome/components/wk2132_i2c/* @DrCoolZic
+esphome/components/wk2132_spi/* @DrCoolZic
+esphome/components/wk2168_i2c/* @DrCoolZic
+esphome/components/wk2168_spi/* @DrCoolZic
+esphome/components/wk2204_i2c/* @DrCoolZic
+esphome/components/wk2204_spi/* @DrCoolZic
+esphome/components/wk2212_i2c/* @DrCoolZic
+esphome/components/wk2212_spi/* @DrCoolZic
+esphome/components/wl_134/* @hobbypunk90
+esphome/components/x9c/* @EtienneMD
+esphome/components/xgzp68xx/* @gcormier
+esphome/components/xiaomi_hhccjcy10/* @fariouche
+esphome/components/xiaomi_lywsd02mmc/* @juanluss31
+esphome/components/xiaomi_lywsd03mmc/* @ahpohl
+esphome/components/xiaomi_mhoc303/* @drug123
+esphome/components/xiaomi_mhoc401/* @vevsvevs
+esphome/components/xiaomi_rtcgq02lm/* @jesserockz
+esphome/components/xl9535/* @mreditor97
+esphome/components/xpt2046/touchscreen/* @nielsnl68 @numo68
+esphome/components/xxtea/* @clydebarrow
+esphome/components/zhlt01/* @cfeenstra1024
+esphome/components/zio_ultrasonic/* @kahrendt

CODE_OF_CONDUCT.md

@@ -8,19 +8,19 @@ In the interest of fostering an open and welcoming environment, we as contributo
 
 Examples of behavior that contributes to creating a positive environment include:
 
-* Using welcoming and inclusive language
-* Being respectful of differing viewpoints and experiences
-* Gracefully accepting constructive criticism
-* Focusing on what is best for the community
-* Showing empathy towards other community members
+- Using welcoming and inclusive language
+- Being respectful of differing viewpoints and experiences
+- Gracefully accepting constructive criticism
+- Focusing on what is best for the community
+- Showing empathy towards other community members
 
 Examples of unacceptable behavior by participants include:
 
-* The use of sexualized language or imagery and unwelcome sexual attention or advances
-* Trolling, insulting/derogatory comments, and personal or political attacks
-* Public or private harassment
-* Publishing others' private information, such as a physical or electronic address, without explicit permission
-* Other conduct which could reasonably be considered inappropriate in a professional setting
+- The use of sexualized language or imagery and unwelcome sexual attention or advances
+- Trolling, insulting/derogatory comments, and personal or political attacks
+- Public or private harassment
+- Publishing others' private information, such as a physical or electronic address, without explicit permission
+- Other conduct which could reasonably be considered inappropriate in a professional setting
 
 ## Our Responsibilities
 
@@ -34,7 +34,7 @@ This Code of Conduct applies both within project spaces and in public spaces whe
 
 ## Enforcement
 
-Instances of abusive, harassing, or otherwise unacceptable behavior may be reported by contacting the project team at contact@otto-winter.com. The project team will review and investigate all complaints, and will respond in a way that it deems appropriate to the circumstances. The project team is obligated to maintain confidentiality with regard to the reporter of an incident. Further details of specific enforcement policies may be posted separately.
+Instances of abusive, harassing, or otherwise unacceptable behavior may be reported by contacting the project team at esphome@openhomefoundation.org. The project team will review and investigate all complaints, and will respond in a way that it deems appropriate to the circumstances. The project team is obligated to maintain confidentiality with regard to the reporter of an incident. Further details of specific enforcement policies may be posted separately.
 
 Project maintainers who do not follow or enforce the Code of Conduct in good faith may face temporary or permanent repercussions as determined by other members of the project's leadership.
 

CONTRIBUTING.md

@@ -1,18 +1,14 @@
-# Contributing to ESPHome
+# Contributing to ESPHome [![Discord Chat](https://img.shields.io/discord/429907082951524364.svg)](https://discord.gg/KhAMKrd) [![GitHub release](https://img.shields.io/github/release/esphome/esphome.svg)](https://GitHub.com/esphome/esphome/releases/)
 
-This python project is responsible for reading in YAML configuration files,
-converting them to C++ code. This code is then converted to a platformio project and compiled
-with [esphome-core](https://github.com/esphome/esphome-core), the C++ framework behind the project.
+We welcome contributions to the ESPHome suite of code and documentation!
 
-For a detailed guide, please see https://esphome.io/guides/contributing.html#contributing-to-esphomeyaml
+Please read our [contributing guide](https://esphome.io/guides/contributing.html) if you wish to contribute to the
+project and be sure to join us on [Discord](https://discord.gg/KhAMKrd).
 
-Things to note when contributing:
+**See also:**
 
- - Please test your changes :)
- - If a new feature is added or an existing user-facing feature is changed, you should also 
-   update the [docs](https://github.com/esphome/esphome-docs). See [contributing to esphome-docs](https://esphome.io/guides/contributing.html#contributing-to-esphomedocs)
-   for more information.
- - Please also update the tests in the `tests/` folder. You can do so by just adding a line in one of the YAML files
-   which checks if your new feature compiles correctly.
- - Sometimes I will let pull requests linger because I'm not 100% sure about them. Please feel free to ping
-   me after some time.
+[Documentation](https://esphome.io) -- [Issues](https://github.com/esphome/issues/issues) -- [Feature requests](https://github.com/esphome/feature-requests/issues)
+
+---
+
+[![ESPHome - A project from the Open Home Foundation](https://www.openhomefoundation.org/badges/esphome.png)](https://www.openhomefoundation.org/)

LICENSE

@@ -1,6 +1,17 @@
-MIT License
+# ESPHome License
 
-Copyright (c) 2018 Otto Winter
+Copyright (c) 2019 ESPHome
+
+The ESPHome License is made up of two base licenses: MIT and the GNU GENERAL PUBLIC LICENSE.
+The C++/runtime codebase of the ESPHome project (file extensions .c, .cpp, .h, .hpp, .tcc, .ino) are
+published under the GPLv3 license. The python codebase and all other parts of this codebase are
+published under the MIT license.
+
+Both MIT and GPLv3 licenses are attached to this document.
+
+## MIT License
+
+Copyright (c) 2019 ESPHome
 
 Permission is hereby granted, free of charge, to any person obtaining a copy
 of this software and associated documentation files (the "Software"), to deal
@@ -19,3 +30,680 @@ AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
 SOFTWARE.
+
+## GPLv3 License
+
+                    GNU GENERAL PUBLIC LICENSE
+                       Version 3, 29 June 2007
+
+ Copyright (C) 2007 Free Software Foundation, Inc. <http://fsf.org/>
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+                            Preamble
+
+  The GNU General Public License is a free, copyleft license for
+software and other kinds of works.
+
+  The licenses for most software and other practical works are designed
+to take away your freedom to share and change the works.  By contrast,
+the GNU General Public License is intended to guarantee your freedom to
+share and change all versions of a program--to make sure it remains free
+software for all its users.  We, the Free Software Foundation, use the
+GNU General Public License for most of our software; it applies also to
+any other work released this way by its authors.  You can apply it to
+your programs, too.
+
+  When we speak of free software, we are referring to freedom, not
+price.  Our General Public Licenses are designed to make sure that you
+have the freedom to distribute copies of free software (and charge for
+them if you wish), that you receive source code or can get it if you
+want it, that you can change the software or use pieces of it in new
+free programs, and that you know you can do these things.
+
+  To protect your rights, we need to prevent others from denying you
+these rights or asking you to surrender the rights.  Therefore, you have
+certain responsibilities if you distribute copies of the software, or if
+you modify it: responsibilities to respect the freedom of others.
+
+  For example, if you distribute copies of such a program, whether
+gratis or for a fee, you must pass on to the recipients the same
+freedoms that you received.  You must make sure that they, too, receive
+or can get the source code.  And you must show them these terms so they
+know their rights.
+
+  Developers that use the GNU GPL protect your rights with two steps:
+(1) assert copyright on the software, and (2) offer you this License
+giving you legal permission to copy, distribute and/or modify it.
+
+  For the developers' and authors' protection, the GPL clearly explains
+that there is no warranty for this free software.  For both users' and
+authors' sake, the GPL requires that modified versions be marked as
+changed, so that their problems will not be attributed erroneously to
+authors of previous versions.
+
+  Some devices are designed to deny users access to install or run
+modified versions of the software inside them, although the manufacturer
+can do so.  This is fundamentally incompatible with the aim of
+protecting users' freedom to change the software.  The systematic
+pattern of such abuse occurs in the area of products for individuals to
+use, which is precisely where it is most unacceptable.  Therefore, we
+have designed this version of the GPL to prohibit the practice for those
+products.  If such problems arise substantially in other domains, we
+stand ready to extend this provision to those domains in future versions
+of the GPL, as needed to protect the freedom of users.
+
+  Finally, every program is threatened constantly by software patents.
+States should not allow patents to restrict development and use of
+software on general-purpose computers, but in those that do, we wish to
+avoid the special danger that patents applied to a free program could
+make it effectively proprietary.  To prevent this, the GPL assures that
+patents cannot be used to render the program non-free.
+
+  The precise terms and conditions for copying, distribution and
+modification follow.
+
+                       TERMS AND CONDITIONS
+
+  0. Definitions.
+
+  "This License" refers to version 3 of the GNU General Public License.
+
+  "Copyright" also means copyright-like laws that apply to other kinds of
+works, such as semiconductor masks.
+
+  "The Program" refers to any copyrightable work licensed under this
+License.  Each licensee is addressed as "you".  "Licensees" and
+"recipients" may be individuals or organizations.
+
+  To "modify" a work means to copy from or adapt all or part of the work
+in a fashion requiring copyright permission, other than the making of an
+exact copy.  The resulting work is called a "modified version" of the
+earlier work or a work "based on" the earlier work.
+
+  A "covered work" means either the unmodified Program or a work based
+on the Program.
+
+  To "propagate" a work means to do anything with it that, without
+permission, would make you directly or secondarily liable for
+infringement under applicable copyright law, except executing it on a
+computer or modifying a private copy.  Propagation includes copying,
+distribution (with or without modification), making available to the
+public, and in some countries other activities as well.
+
+  To "convey" a work means any kind of propagation that enables other
+parties to make or receive copies.  Mere interaction with a user through
+a computer network, with no transfer of a copy, is not conveying.
+
+  An interactive user interface displays "Appropriate Legal Notices"
+to the extent that it includes a convenient and prominently visible
+feature that (1) displays an appropriate copyright notice, and (2)
+tells the user that there is no warranty for the work (except to the
+extent that warranties are provided), that licensees may convey the
+work under this License, and how to view a copy of this License.  If
+the interface presents a list of user commands or options, such as a
+menu, a prominent item in the list meets this criterion.
+
+  1. Source Code.
+
+  The "source code" for a work means the preferred form of the work
+for making modifications to it.  "Object code" means any non-source
+form of a work.
+
+  A "Standard Interface" means an interface that either is an official
+standard defined by a recognized standards body, or, in the case of
+interfaces specified for a particular programming language, one that
+is widely used among developers working in that language.
+
+  The "System Libraries" of an executable work include anything, other
+than the work as a whole, that (a) is included in the normal form of
+packaging a Major Component, but which is not part of that Major
+Component, and (b) serves only to enable use of the work with that
+Major Component, or to implement a Standard Interface for which an
+implementation is available to the public in source code form.  A
+"Major Component", in this context, means a major essential component
+(kernel, window system, and so on) of the specific operating system
+(if any) on which the executable work runs, or a compiler used to
+produce the work, or an object code interpreter used to run it.
+
+  The "Corresponding Source" for a work in object code form means all
+the source code needed to generate, install, and (for an executable
+work) run the object code and to modify the work, including scripts to
+control those activities.  However, it does not include the work's
+System Libraries, or general-purpose tools or generally available free
+programs which are used unmodified in performing those activities but
+which are not part of the work.  For example, Corresponding Source
+includes interface definition files associated with source files for
+the work, and the source code for shared libraries and dynamically
+linked subprograms that the work is specifically designed to require,
+such as by intimate data communication or control flow between those
+subprograms and other parts of the work.
+
+  The Corresponding Source need not include anything that users
+can regenerate automatically from other parts of the Corresponding
+Source.
+
+  The Corresponding Source for a work in source code form is that
+same work.
+
+  2. Basic Permissions.
+
+  All rights granted under this License are granted for the term of
+copyright on the Program, and are irrevocable provided the stated
+conditions are met.  This License explicitly affirms your unlimited
+permission to run the unmodified Program.  The output from running a
+covered work is covered by this License only if the output, given its
+content, constitutes a covered work.  This License acknowledges your
+rights of fair use or other equivalent, as provided by copyright law.
+
+  You may make, run and propagate covered works that you do not
+convey, without conditions so long as your license otherwise remains
+in force.  You may convey covered works to others for the sole purpose
+of having them make modifications exclusively for you, or provide you
+with facilities for running those works, provided that you comply with
+the terms of this License in conveying all material for which you do
+not control copyright.  Those thus making or running the covered works
+for you must do so exclusively on your behalf, under your direction
+and control, on terms that prohibit them from making any copies of
+your copyrighted material outside their relationship with you.
+
+  Conveying under any other circumstances is permitted solely under
+the conditions stated below.  Sublicensing is not allowed; section 10
+makes it unnecessary.
+
+  3. Protecting Users' Legal Rights From Anti-Circumvention Law.
+
+  No covered work shall be deemed part of an effective technological
+measure under any applicable law fulfilling obligations under article
+11 of the WIPO copyright treaty adopted on 20 December 1996, or
+similar laws prohibiting or restricting circumvention of such
+measures.
+
+  When you convey a covered work, you waive any legal power to forbid
+circumvention of technological measures to the extent such circumvention
+is effected by exercising rights under this License with respect to
+the covered work, and you disclaim any intention to limit operation or
+modification of the work as a means of enforcing, against the work's
+users, your or third parties' legal rights to forbid circumvention of
+technological measures.
+
+  4. Conveying Verbatim Copies.
+
+  You may convey verbatim copies of the Program's source code as you
+receive it, in any medium, provided that you conspicuously and
+appropriately publish on each copy an appropriate copyright notice;
+keep intact all notices stating that this License and any
+non-permissive terms added in accord with section 7 apply to the code;
+keep intact all notices of the absence of any warranty; and give all
+recipients a copy of this License along with the Program.
+
+  You may charge any price or no price for each copy that you convey,
+and you may offer support or warranty protection for a fee.
+
+  5. Conveying Modified Source Versions.
+
+  You may convey a work based on the Program, or the modifications to
+produce it from the Program, in the form of source code under the
+terms of section 4, provided that you also meet all of these conditions:
+
+    a) The work must carry prominent notices stating that you modified
+    it, and giving a relevant date.
+
+    b) The work must carry prominent notices stating that it is
+    released under this License and any conditions added under section
+    7.  This requirement modifies the requirement in section 4 to
+    "keep intact all notices".
+
+    c) You must license the entire work, as a whole, under this
+    License to anyone who comes into possession of a copy.  This
+    License will therefore apply, along with any applicable section 7
+    additional terms, to the whole of the work, and all its parts,
+    regardless of how they are packaged.  This License gives no
+    permission to license the work in any other way, but it does not
+    invalidate such permission if you have separately received it.
+
+    d) If the work has interactive user interfaces, each must display
+    Appropriate Legal Notices; however, if the Program has interactive
+    interfaces that do not display Appropriate Legal Notices, your
+    work need not make them do so.
+
+  A compilation of a covered work with other separate and independent
+works, which are not by their nature extensions of the covered work,
+and which are not combined with it such as to form a larger program,
+in or on a volume of a storage or distribution medium, is called an
+"aggregate" if the compilation and its resulting copyright are not
+used to limit the access or legal rights of the compilation's users
+beyond what the individual works permit.  Inclusion of a covered work
+in an aggregate does not cause this License to apply to the other
+parts of the aggregate.
+
+  6. Conveying Non-Source Forms.
+
+  You may convey a covered work in object code form under the terms
+of sections 4 and 5, provided that you also convey the
+machine-readable Corresponding Source under the terms of this License,
+in one of these ways:
+
+    a) Convey the object code in, or embodied in, a physical product
+    (including a physical distribution medium), accompanied by the
+    Corresponding Source fixed on a durable physical medium
+    customarily used for software interchange.
+
+    b) Convey the object code in, or embodied in, a physical product
+    (including a physical distribution medium), accompanied by a
+    written offer, valid for at least three years and valid for as
+    long as you offer spare parts or customer support for that product
+    model, to give anyone who possesses the object code either (1) a
+    copy of the Corresponding Source for all the software in the
+    product that is covered by this License, on a durable physical
+    medium customarily used for software interchange, for a price no
+    more than your reasonable cost of physically performing this
+    conveying of source, or (2) access to copy the
+    Corresponding Source from a network server at no charge.
+
+    c) Convey individual copies of the object code with a copy of the
+    written offer to provide the Corresponding Source.  This
+    alternative is allowed only occasionally and noncommercially, and
+    only if you received the object code with such an offer, in accord
+    with subsection 6b.
+
+    d) Convey the object code by offering access from a designated
+    place (gratis or for a charge), and offer equivalent access to the
+    Corresponding Source in the same way through the same place at no
+    further charge.  You need not require recipients to copy the
+    Corresponding Source along with the object code.  If the place to
+    copy the object code is a network server, the Corresponding Source
+    may be on a different server (operated by you or a third party)
+    that supports equivalent copying facilities, provided you maintain
+    clear directions next to the object code saying where to find the
+    Corresponding Source.  Regardless of what server hosts the
+    Corresponding Source, you remain obligated to ensure that it is
+    available for as long as needed to satisfy these requirements.
+
+    e) Convey the object code using peer-to-peer transmission, provided
+    you inform other peers where the object code and Corresponding
+    Source of the work are being offered to the general public at no
+    charge under subsection 6d.
+
+  A separable portion of the object code, whose source code is excluded
+from the Corresponding Source as a System Library, need not be
+included in conveying the object code work.
+
+  A "User Product" is either (1) a "consumer product", which means any
+tangible personal property which is normally used for personal, family,
+or household purposes, or (2) anything designed or sold for incorporation
+into a dwelling.  In determining whether a product is a consumer product,
+doubtful cases shall be resolved in favor of coverage.  For a particular
+product received by a particular user, "normally used" refers to a
+typical or common use of that class of product, regardless of the status
+of the particular user or of the way in which the particular user
+actually uses, or expects or is expected to use, the product.  A product
+is a consumer product regardless of whether the product has substantial
+commercial, industrial or non-consumer uses, unless such uses represent
+the only significant mode of use of the product.
+
+  "Installation Information" for a User Product means any methods,
+procedures, authorization keys, or other information required to install
+and execute modified versions of a covered work in that User Product from
+a modified version of its Corresponding Source.  The information must
+suffice to ensure that the continued functioning of the modified object
+code is in no case prevented or interfered with solely because
+modification has been made.
+
+  If you convey an object code work under this section in, or with, or
+specifically for use in, a User Product, and the conveying occurs as
+part of a transaction in which the right of possession and use of the
+User Product is transferred to the recipient in perpetuity or for a
+fixed term (regardless of how the transaction is characterized), the
+Corresponding Source conveyed under this section must be accompanied
+by the Installation Information.  But this requirement does not apply
+if neither you nor any third party retains the ability to install
+modified object code on the User Product (for example, the work has
+been installed in ROM).
+
+  The requirement to provide Installation Information does not include a
+requirement to continue to provide support service, warranty, or updates
+for a work that has been modified or installed by the recipient, or for
+the User Product in which it has been modified or installed.  Access to a
+network may be denied when the modification itself materially and
+adversely affects the operation of the network or violates the rules and
+protocols for communication across the network.
+
+  Corresponding Source conveyed, and Installation Information provided,
+in accord with this section must be in a format that is publicly
+documented (and with an implementation available to the public in
+source code form), and must require no special password or key for
+unpacking, reading or copying.
+
+  7. Additional Terms.
+
+  "Additional permissions" are terms that supplement the terms of this
+License by making exceptions from one or more of its conditions.
+Additional permissions that are applicable to the entire Program shall
+be treated as though they were included in this License, to the extent
+that they are valid under applicable law.  If additional permissions
+apply only to part of the Program, that part may be used separately
+under those permissions, but the entire Program remains governed by
+this License without regard to the additional permissions.
+
+  When you convey a copy of a covered work, you may at your option
+remove any additional permissions from that copy, or from any part of
+it.  (Additional permissions may be written to require their own
+removal in certain cases when you modify the work.)  You may place
+additional permissions on material, added by you to a covered work,
+for which you have or can give appropriate copyright permission.
+
+  Notwithstanding any other provision of this License, for material you
+add to a covered work, you may (if authorized by the copyright holders of
+that material) supplement the terms of this License with terms:
+
+    a) Disclaiming warranty or limiting liability differently from the
+    terms of sections 15 and 16 of this License; or
+
+    b) Requiring preservation of specified reasonable legal notices or
+    author attributions in that material or in the Appropriate Legal
+    Notices displayed by works containing it; or
+
+    c) Prohibiting misrepresentation of the origin of that material, or
+    requiring that modified versions of such material be marked in
+    reasonable ways as different from the original version; or
+
+    d) Limiting the use for publicity purposes of names of licensors or
+    authors of the material; or
+
+    e) Declining to grant rights under trademark law for use of some
+    trade names, trademarks, or service marks; or
+
+    f) Requiring indemnification of licensors and authors of that
+    material by anyone who conveys the material (or modified versions of
+    it) with contractual assumptions of liability to the recipient, for
+    any liability that these contractual assumptions directly impose on
+    those licensors and authors.
+
+  All other non-permissive additional terms are considered "further
+restrictions" within the meaning of section 10.  If the Program as you
+received it, or any part of it, contains a notice stating that it is
+governed by this License along with a term that is a further
+restriction, you may remove that term.  If a license document contains
+a further restriction but permits relicensing or conveying under this
+License, you may add to a covered work material governed by the terms
+of that license document, provided that the further restriction does
+not survive such relicensing or conveying.
+
+  If you add terms to a covered work in accord with this section, you
+must place, in the relevant source files, a statement of the
+additional terms that apply to those files, or a notice indicating
+where to find the applicable terms.
+
+  Additional terms, permissive or non-permissive, may be stated in the
+form of a separately written license, or stated as exceptions;
+the above requirements apply either way.
+
+  8. Termination.
+
+  You may not propagate or modify a covered work except as expressly
+provided under this License.  Any attempt otherwise to propagate or
+modify it is void, and will automatically terminate your rights under
+this License (including any patent licenses granted under the third
+paragraph of section 11).
+
+  However, if you cease all violation of this License, then your
+license from a particular copyright holder is reinstated (a)
+provisionally, unless and until the copyright holder explicitly and
+finally terminates your license, and (b) permanently, if the copyright
+holder fails to notify you of the violation by some reasonable means
+prior to 60 days after the cessation.
+
+  Moreover, your license from a particular copyright holder is
+reinstated permanently if the copyright holder notifies you of the
+violation by some reasonable means, this is the first time you have
+received notice of violation of this License (for any work) from that
+copyright holder, and you cure the violation prior to 30 days after
+your receipt of the notice.
+
+  Termination of your rights under this section does not terminate the
+licenses of parties who have received copies or rights from you under
+this License.  If your rights have been terminated and not permanently
+reinstated, you do not qualify to receive new licenses for the same
+material under section 10.
+
+  9. Acceptance Not Required for Having Copies.
+
+  You are not required to accept this License in order to receive or
+run a copy of the Program.  Ancillary propagation of a covered work
+occurring solely as a consequence of using peer-to-peer transmission
+to receive a copy likewise does not require acceptance.  However,
+nothing other than this License grants you permission to propagate or
+modify any covered work.  These actions infringe copyright if you do
+not accept this License.  Therefore, by modifying or propagating a
+covered work, you indicate your acceptance of this License to do so.
+
+  10. Automatic Licensing of Downstream Recipients.
+
+  Each time you convey a covered work, the recipient automatically
+receives a license from the original licensors, to run, modify and
+propagate that work, subject to this License.  You are not responsible
+for enforcing compliance by third parties with this License.
+
+  An "entity transaction" is a transaction transferring control of an
+organization, or substantially all assets of one, or subdividing an
+organization, or merging organizations.  If propagation of a covered
+work results from an entity transaction, each party to that
+transaction who receives a copy of the work also receives whatever
+licenses to the work the party's predecessor in interest had or could
+give under the previous paragraph, plus a right to possession of the
+Corresponding Source of the work from the predecessor in interest, if
+the predecessor has it or can get it with reasonable efforts.
+
+  You may not impose any further restrictions on the exercise of the
+rights granted or affirmed under this License.  For example, you may
+not impose a license fee, royalty, or other charge for exercise of
+rights granted under this License, and you may not initiate litigation
+(including a cross-claim or counterclaim in a lawsuit) alleging that
+any patent claim is infringed by making, using, selling, offering for
+sale, or importing the Program or any portion of it.
+
+  11. Patents.
+
+  A "contributor" is a copyright holder who authorizes use under this
+License of the Program or a work on which the Program is based.  The
+work thus licensed is called the contributor's "contributor version".
+
+  A contributor's "essential patent claims" are all patent claims
+owned or controlled by the contributor, whether already acquired or
+hereafter acquired, that would be infringed by some manner, permitted
+by this License, of making, using, or selling its contributor version,
+but do not include claims that would be infringed only as a
+consequence of further modification of the contributor version.  For
+purposes of this definition, "control" includes the right to grant
+patent sublicenses in a manner consistent with the requirements of
+this License.
+
+  Each contributor grants you a non-exclusive, worldwide, royalty-free
+patent license under the contributor's essential patent claims, to
+make, use, sell, offer for sale, import and otherwise run, modify and
+propagate the contents of its contributor version.
+
+  In the following three paragraphs, a "patent license" is any express
+agreement or commitment, however denominated, not to enforce a patent
+(such as an express permission to practice a patent or covenant not to
+sue for patent infringement).  To "grant" such a patent license to a
+party means to make such an agreement or commitment not to enforce a
+patent against the party.
+
+  If you convey a covered work, knowingly relying on a patent license,
+and the Corresponding Source of the work is not available for anyone
+to copy, free of charge and under the terms of this License, through a
+publicly available network server or other readily accessible means,
+then you must either (1) cause the Corresponding Source to be so
+available, or (2) arrange to deprive yourself of the benefit of the
+patent license for this particular work, or (3) arrange, in a manner
+consistent with the requirements of this License, to extend the patent
+license to downstream recipients.  "Knowingly relying" means you have
+actual knowledge that, but for the patent license, your conveying the
+covered work in a country, or your recipient's use of the covered work
+in a country, would infringe one or more identifiable patents in that
+country that you have reason to believe are valid.
+
+  If, pursuant to or in connection with a single transaction or
+arrangement, you convey, or propagate by procuring conveyance of, a
+covered work, and grant a patent license to some of the parties
+receiving the covered work authorizing them to use, propagate, modify
+or convey a specific copy of the covered work, then the patent license
+you grant is automatically extended to all recipients of the covered
+work and works based on it.
+
+  A patent license is "discriminatory" if it does not include within
+the scope of its coverage, prohibits the exercise of, or is
+conditioned on the non-exercise of one or more of the rights that are
+specifically granted under this License.  You may not convey a covered
+work if you are a party to an arrangement with a third party that is
+in the business of distributing software, under which you make payment
+to the third party based on the extent of your activity of conveying
+the work, and under which the third party grants, to any of the
+parties who would receive the covered work from you, a discriminatory
+patent license (a) in connection with copies of the covered work
+conveyed by you (or copies made from those copies), or (b) primarily
+for and in connection with specific products or compilations that
+contain the covered work, unless you entered into that arrangement,
+or that patent license was granted, prior to 28 March 2007.
+
+  Nothing in this License shall be construed as excluding or limiting
+any implied license or other defenses to infringement that may
+otherwise be available to you under applicable patent law.
+
+  12. No Surrender of Others' Freedom.
+
+  If conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License.  If you cannot convey a
+covered work so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you may
+not convey it at all.  For example, if you agree to terms that obligate you
+to collect a royalty for further conveying from those to whom you convey
+the Program, the only way you could satisfy both those terms and this
+License would be to refrain entirely from conveying the Program.
+
+  13. Use with the GNU Affero General Public License.
+
+  Notwithstanding any other provision of this License, you have
+permission to link or combine any covered work with a work licensed
+under version 3 of the GNU Affero General Public License into a single
+combined work, and to convey the resulting work.  The terms of this
+License will continue to apply to the part which is the covered work,
+but the special requirements of the GNU Affero General Public License,
+section 13, concerning interaction through a network will apply to the
+combination as such.
+
+  14. Revised Versions of this License.
+
+  The Free Software Foundation may publish revised and/or new versions of
+the GNU General Public License from time to time.  Such new versions will
+be similar in spirit to the present version, but may differ in detail to
+address new problems or concerns.
+
+  Each version is given a distinguishing version number.  If the
+Program specifies that a certain numbered version of the GNU General
+Public License "or any later version" applies to it, you have the
+option of following the terms and conditions either of that numbered
+version or of any later version published by the Free Software
+Foundation.  If the Program does not specify a version number of the
+GNU General Public License, you may choose any version ever published
+by the Free Software Foundation.
+
+  If the Program specifies that a proxy can decide which future
+versions of the GNU General Public License can be used, that proxy's
+public statement of acceptance of a version permanently authorizes you
+to choose that version for the Program.
+
+  Later license versions may give you additional or different
+permissions.  However, no additional obligations are imposed on any
+author or copyright holder as a result of your choosing to follow a
+later version.
+
+  15. Disclaimer of Warranty.
+
+  THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY
+APPLICABLE LAW.  EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT
+HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY
+OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,
+THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+PURPOSE.  THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM
+IS WITH YOU.  SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF
+ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
+
+  16. Limitation of Liability.
+
+  IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS
+THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY
+GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE
+USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF
+DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD
+PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS),
+EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF
+SUCH DAMAGES.
+
+  17. Interpretation of Sections 15 and 16.
+
+  If the disclaimer of warranty and limitation of liability provided
+above cannot be given local legal effect according to their terms,
+reviewing courts shall apply local law that most closely approximates
+an absolute waiver of all civil liability in connection with the
+Program, unless a warranty or assumption of liability accompanies a
+copy of the Program in return for a fee.
+
+                     END OF TERMS AND CONDITIONS
+
+            How to Apply These Terms to Your New Programs
+
+  If you develop a new program, and you want it to be of the greatest
+possible use to the public, the best way to achieve this is to make it
+free software which everyone can redistribute and change under these terms.
+
+  To do so, attach the following notices to the program.  It is safest
+to attach them to the start of each source file to most effectively
+state the exclusion of warranty; and each file should have at least
+the "copyright" line and a pointer to where the full notice is found.
+
+    <one line to give the program's name and a brief idea of what it does.>
+    Copyright (C) <year>  <name of author>
+
+    This program is free software: you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation, either version 3 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+Also add information on how to contact you by electronic and paper mail.
+
+  If the program does terminal interaction, make it output a short
+notice like this when it starts in an interactive mode:
+
+    <program>  Copyright (C) <year>  <name of author>
+    This program comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
+    This is free software, and you are welcome to redistribute it
+    under certain conditions; type `show c' for details.
+
+The hypothetical commands `show w' and `show c' should show the appropriate
+parts of the General Public License.  Of course, your program's commands
+might be different; for a GUI interface, you would use an "about box".
+
+  You should also get your employer (if you work as a programmer) or school,
+if any, to sign a "copyright disclaimer" for the program, if necessary.
+For more information on this, and how to apply and follow the GNU GPL, see
+<http://www.gnu.org/licenses/>.
+
+  The GNU General Public License does not permit incorporating your program
+into proprietary programs.  If your program is a subroutine library, you
+may consider it more useful to permit linking proprietary applications with
+the library.  If this is what you want to do, use the GNU Lesser General
+Public License instead of this License.  But first, please read
+<http://www.gnu.org/philosophy/why-not-lgpl.html>.

MANIFEST.in

@@ -1,17 +1,6 @@
+include LICENSE
 include README.md
-include esphome/dashboard/templates/index.html
-include esphome/dashboard/templates/login.html
-include esphome/dashboard/static/ace.js
-include esphome/dashboard/static/esphome.css
-include esphome/dashboard/static/esphome.js
-include esphome/dashboard/static/favicon.ico
-include esphome/dashboard/static/jquery.min.js
-include esphome/dashboard/static/jquery.validate.min.js
-include esphome/dashboard/static/jquery-ui.min.js
-include esphome/dashboard/static/materialize.min.css
-include esphome/dashboard/static/materialize.min.js
-include esphome/dashboard/static/materialize-stepper.min.css
-include esphome/dashboard/static/materialize-stepper.min.js
-include esphome/dashboard/static/mode-yaml.js
-include esphome/dashboard/static/theme-dreamweaver.js
-include esphome/dashboard/static/ext-searchbox.js
+include requirements.txt
+recursive-include esphome *.cpp *.h *.tcc *.c
+recursive-include esphome *.py.script
+recursive-include esphome LICENSE.txt

README.md

@@ -1,9 +1,16 @@
-# ESPHome [![Build Status](https://travis-ci.org/esphome/esphome.svg?branch=master)](https://travis-ci.org/esphome/esphome) [![Discord Chat](https://img.shields.io/discord/429907082951524364.svg)](https://discord.gg/KhAMKrd) [![GitHub release](https://img.shields.io/github/release/esphome/esphome.svg)](https://GitHub.com/esphome/esphome/releases/)
+# ESPHome [![Discord Chat](https://img.shields.io/discord/429907082951524364.svg)](https://discord.gg/KhAMKrd) [![GitHub release](https://img.shields.io/github/release/esphome/esphome.svg)](https://GitHub.com/esphome/esphome/releases/)
 
-[![ESPHome Logo](https://esphome.io/_images/logo-text.png)](https://esphome.io/)
+<a href="https://esphome.io/">
+  <picture>
+    <source media="(prefers-color-scheme: dark)" srcset="https://esphome.io/_static/logo-text-on-dark.svg", alt="ESPHome Logo">
+    <img src="https://esphome.io/_static/logo-text-on-light.svg" alt="ESPHome Logo">
+  </picture>
+</a>
 
-**Documentation:** https://esphome.io/
+---
 
-For issues, please go to [the issue tracker](https://github.com/esphome/issues/issues).
+[Documentation](https://esphome.io) -- [Issues](https://github.com/esphome/issues/issues) -- [Feature requests](https://github.com/esphome/feature-requests/issues)
 
-For feature requests, please see [feature requests](https://github.com/esphome/feature-requests/issues).
+---
+
+[![ESPHome - A project from the Open Home Foundation](https://www.openhomefoundation.org/badges/esphome.png)](https://www.openhomefoundation.org/)

docker/Dockerfile

@@ -1,10 +1,217 @@
-ARG BUILD_FROM=esphome/esphome-base-amd64:1.2.1
-FROM ${BUILD_FROM}
+# Build these with the build.py script
+# Example:
+#   python3 docker/build.py --tag dev --arch amd64 --build-type docker build
+
+# One of "docker", "hassio"
+ARG BASEIMGTYPE=docker
+
+
+# https://github.com/hassio-addons/addon-debian-base/releases
+FROM ghcr.io/hassio-addons/debian-base:7.2.0 AS base-hassio
+# https://hub.docker.com/_/debian?tab=tags&page=1&name=bookworm
+FROM debian:12.2-slim AS base-docker
+
+FROM base-${BASEIMGTYPE} AS base
+
+
+ARG TARGETARCH
+ARG TARGETVARIANT
+
+
+# Note that --break-system-packages is used below because
+# https://peps.python.org/pep-0668/ added a safety check that prevents
+# installing packages with the same name as a system package. This is
+# not a problem for us because we are not concerned about overwriting
+# system packages because we are running in an isolated container.
 
-COPY . .
 RUN \
-    pip2 install --no-cache-dir --no-binary :all: -e .
+    apt-get update \
+    # Use pinned versions so that we get updates with build caching
+    && apt-get install -y --no-install-recommends \
+        python3-pip=23.0.1+dfsg-1 \
+        python3-setuptools=66.1.1-1+deb12u1 \
+        python3-venv=3.11.2-1+b1 \
+        python3-wheel=0.38.4-2 \
+        iputils-ping=3:20221126-1+deb12u1 \
+        git=1:2.39.5-0+deb12u2 \
+        curl=7.88.1-10+deb12u12 \
+        openssh-client=1:9.2p1-2+deb12u5 \
+        python3-cffi=1.15.1-5 \
+        libcairo2=1.16.0-7 \
+        libmagic1=1:5.44-3 \
+        patch=2.7.6-7 \
+    && rm -rf \
+        /tmp/* \
+        /var/{cache,log}/* \
+        /var/lib/apt/lists/*
 
+ENV \
+  # Fix click python3 lang warning https://click.palletsprojects.com/en/7.x/python3/
+  LANG=C.UTF-8 LC_ALL=C.UTF-8 \
+  # Store globally installed pio libs in /piolibs
+  PLATFORMIO_GLOBALLIB_DIR=/piolibs
+
+RUN \
+    pip3 install \
+    --break-system-packages --no-cache-dir \
+    # Keep platformio version in sync with requirements.txt
+    platformio==6.1.18 \
+    # Change some platformio settings
+    && platformio settings set enable_telemetry No \
+    && platformio settings set check_platformio_interval 1000000 \
+    && mkdir -p /piolibs
+
+
+# First install requirements to leverage caching when requirements don't change
+# tmpfs is for https://github.com/rust-lang/cargo/issues/8719
+
+COPY requirements.txt requirements_optional.txt /
+RUN --mount=type=tmpfs,target=/root/.cargo <<END-OF-RUN
+# Fail on any non-zero status
+set -e
+
+# install build tools in case wheels are not available
+BUILD_DEPS="
+    build-essential=12.9
+    python3-dev=3.11.2-1+b1
+    zlib1g-dev=1:1.2.13.dfsg-1
+    libjpeg-dev=1:2.1.5-2
+    libfreetype-dev=2.12.1+dfsg-5+deb12u4
+    libssl-dev=3.0.15-1~deb12u1
+    libffi-dev=3.4.4-1
+    cargo=0.66.0+ds1-1
+    pkg-config=1.8.1-1
+"
+LIB_DEPS="
+    libtiff6=4.5.0-6+deb12u1
+    libopenjp2-7=2.5.0-2+deb12u1
+"
+if [ "$TARGETARCH$TARGETVARIANT" = "arm64" ]
+then
+    apt-get update
+    apt-get install -y --no-install-recommends $BUILD_DEPS $LIB_DEPS
+fi
+
+CARGO_REGISTRIES_CRATES_IO_PROTOCOL=sparse CARGO_HOME=/root/.cargo
+pip3 install --break-system-packages --no-cache-dir -r /requirements.txt -r /requirements_optional.txt
+
+if [ "$TARGETARCH$TARGETVARIANT" = "arm64" ]
+then
+    apt-get remove -y --purge --auto-remove $BUILD_DEPS
+    rm -rf /tmp/* /var/{cache,log}/* /var/lib/apt/lists/*
+fi
+END-OF-RUN
+
+
+COPY script/platformio_install_deps.py platformio.ini /
+RUN /platformio_install_deps.py /platformio.ini --libraries
+
+# Avoid unsafe git error when container user and file config volume permissions don't match
+RUN git config --system --add safe.directory '*'
+
+
+# ======================= docker-type image =======================
+FROM base AS docker
+
+# Copy esphome and install
+COPY . /esphome
+RUN pip3 install --break-system-packages --no-cache-dir -e /esphome
+
+# Settings for dashboard
+ENV USERNAME="" PASSWORD=""
+
+# Expose the dashboard to Docker
+EXPOSE 6052
+
+# Run healthcheck (heartbeat)
+HEALTHCHECK --interval=30s --timeout=30s \
+  CMD curl --fail http://localhost:6052/version -A "HealthCheck" || exit 1
+
+COPY docker/docker_entrypoint.sh /entrypoint.sh
+
+# The directory the user should mount their configuration files to
+VOLUME /config
 WORKDIR /config
-ENTRYPOINT ["esphome"]
-CMD ["/config", "dashboard"]
+# Set entrypoint to esphome (via a script) so that the user doesn't have to type 'esphome'
+# in every docker command twice
+ENTRYPOINT ["/entrypoint.sh"]
+# When no arguments given, start the dashboard in the workdir
+CMD ["dashboard", "/config"]
+
+
+ARG BUILD_VERSION=dev
+
+# Labels
+LABEL \
+    org.opencontainers.image.authors="The ESPHome Authors" \
+    org.opencontainers.image.title="ESPHome" \
+    org.opencontainers.image.description="ESPHome is a system to configure your microcontrollers by simple yet powerful configuration files and control them remotely through Home Automation systems" \
+    org.opencontainers.image.url="https://esphome.io/" \
+    org.opencontainers.image.documentation="https://esphome.io/" \
+    org.opencontainers.image.source="https://github.com/esphome/esphome" \
+    org.opencontainers.image.licenses="ESPHome" \
+    org.opencontainers.image.version=${BUILD_VERSION}
+
+
+# ======================= hassio-type image =======================
+FROM base AS hassio
+
+RUN \
+    apt-get update \
+    # Use pinned versions so that we get updates with build caching
+    && apt-get install -y --no-install-recommends \
+        nginx-light=1.22.1-9+deb12u1 \
+    && rm -rf \
+        /tmp/* \
+        /var/{cache,log}/* \
+        /var/lib/apt/lists/*
+
+ARG BUILD_VERSION=dev
+
+# Copy root filesystem
+COPY docker/ha-addon-rootfs/ /
+
+# Copy esphome and install
+COPY . /esphome
+RUN pip3 install --break-system-packages --no-cache-dir -e /esphome
+
+# Labels
+LABEL \
+    io.hass.name="ESPHome" \
+    io.hass.description="ESPHome is a system to configure your microcontrollers by simple yet powerful configuration files and control them remotely through Home Automation systems" \
+    io.hass.type="addon" \
+    io.hass.version="${BUILD_VERSION}"
+    # io.hass.arch is inherited from addon-debian-base
+
+
+
+
+# ======================= lint-type image =======================
+FROM base AS lint
+
+ENV \
+  PLATFORMIO_CORE_DIR=/esphome/.temp/platformio
+
+RUN \
+    curl -L https://apt.llvm.org/llvm-snapshot.gpg.key -o /etc/apt/trusted.gpg.d/apt.llvm.org.asc \
+    && echo "deb http://apt.llvm.org/bookworm/ llvm-toolchain-bookworm-18 main" > /etc/apt/sources.list.d/llvm.sources.list \
+    && apt-get update \
+    # Use pinned versions so that we get updates with build caching
+    && apt-get install -y --no-install-recommends \
+        clang-format-13=1:13.0.1-11+b2 \
+        patch=2.7.6-7 \
+        software-properties-common=0.99.30-4.1~deb12u1 \
+        nano=7.2-1+deb12u1 \
+        build-essential=12.9 \
+        python3-dev=3.11.2-1+b1 \
+        clang-tidy-18=1:18.1.8~++20240731024826+3b5b5c1ec4a3-1~exp1~20240731144843.145 \
+    && rm -rf \
+        /tmp/* \
+        /var/{cache,log}/* \
+        /var/lib/apt/lists/*
+
+COPY requirements_test.txt /
+RUN pip3 install --break-system-packages --no-cache-dir -r /requirements_test.txt
+
+VOLUME ["/esphome"]
+WORKDIR /esphome

docker/Dockerfile.hassio

@@ -1,20 +0,0 @@
-ARG BUILD_FROM=esphome/esphome-hassio-base-amd64:1.2.1
-FROM ${BUILD_FROM}
-
-# Copy root filesystem
-COPY docker/rootfs/ /
-COPY setup.py setup.cfg MANIFEST.in /opt/esphome/
-COPY esphome /opt/esphome/esphome
-
-RUN \
-    pip2 install --no-cache-dir --no-binary :all: -e /opt/esphome
-
-# Build arguments
-ARG BUILD_VERSION=dev
-
-# Labels
-LABEL \
-    io.hass.name="ESPHome" \
-    io.hass.description="Manage and program ESP8266/ESP32 microcontrollers through YAML configuration files" \
-    io.hass.type="addon" \
-    io.hass.version=${BUILD_VERSION}

docker/Dockerfile.lint

@@ -1,6 +0,0 @@
-FROM python:2.7
-
-COPY requirements.txt /requirements.txt
-
-RUN pip install -r /requirements.txt && \
-    pip install flake8==3.6.0 pylint==1.9.4 pillow

docker/Dockerfile.test

@@ -1,21 +0,0 @@
-FROM ubuntu:bionic
-
-RUN apt-get update && apt-get install -y --no-install-recommends \
-        python \
-        python-pip \
-        python-setuptools \
-        python-pil \
-        git \
-    && apt-get clean && rm -rf /var/lib/apt/lists/* /tmp/*rm -rf /var/lib/apt/lists/* /tmp/* && \
-    pip install --no-cache-dir --no-binary :all: platformio && \
-    platformio settings set enable_telemetry No && \
-    platformio settings set check_libraries_interval 1000000 && \
-    platformio settings set check_platformio_interval 1000000 && \
-    platformio settings set check_platforms_interval 1000000
-
-COPY docker/platformio.ini /pio/platformio.ini
-RUN platformio run -d /pio; rm -rf /pio
-
-COPY requirements.txt /requirements.txt
-
-RUN pip install --no-cache-dir -r /requirements.txt

docker/build.py

@@ -0,0 +1,188 @@
+#!/usr/bin/env python3
+import argparse
+from dataclasses import dataclass
+import re
+import shlex
+import subprocess
+import sys
+
+CHANNEL_DEV = "dev"
+CHANNEL_BETA = "beta"
+CHANNEL_RELEASE = "release"
+CHANNELS = [CHANNEL_DEV, CHANNEL_BETA, CHANNEL_RELEASE]
+
+ARCH_AMD64 = "amd64"
+ARCH_AARCH64 = "aarch64"
+ARCHS = [ARCH_AMD64, ARCH_AARCH64]
+
+TYPE_DOCKER = "docker"
+TYPE_HA_ADDON = "ha-addon"
+TYPE_LINT = "lint"
+TYPES = [TYPE_DOCKER, TYPE_HA_ADDON, TYPE_LINT]
+
+
+parser = argparse.ArgumentParser()
+parser.add_argument(
+    "--tag",
+    type=str,
+    required=True,
+    help="The main docker tag to push to. If a version number also adds latest and/or beta tag",
+)
+parser.add_argument(
+    "--arch", choices=ARCHS, required=False, help="The architecture to build for"
+)
+parser.add_argument(
+    "--build-type", choices=TYPES, required=True, help="The type of build to run"
+)
+parser.add_argument(
+    "--dry-run", action="store_true", help="Don't run any commands, just print them"
+)
+subparsers = parser.add_subparsers(
+    help="Action to perform", dest="command", required=True
+)
+build_parser = subparsers.add_parser("build", help="Build the image")
+build_parser.add_argument("--push", help="Also push the images", action="store_true")
+build_parser.add_argument(
+    "--load", help="Load the docker image locally", action="store_true"
+)
+manifest_parser = subparsers.add_parser(
+    "manifest", help="Create a manifest from already pushed images"
+)
+
+
+@dataclass(frozen=True)
+class DockerParams:
+    build_to: str
+    manifest_to: str
+    baseimgtype: str
+    platform: str
+    target: str
+
+    @classmethod
+    def for_type_arch(cls, build_type, arch):
+        prefix = {
+            TYPE_DOCKER: "esphome/esphome",
+            TYPE_HA_ADDON: "esphome/esphome-hassio",
+            TYPE_LINT: "esphome/esphome-lint",
+        }[build_type]
+        build_to = f"{prefix}-{arch}"
+        baseimgtype = {
+            TYPE_DOCKER: "docker",
+            TYPE_HA_ADDON: "hassio",
+            TYPE_LINT: "docker",
+        }[build_type]
+        platform = {
+            ARCH_AMD64: "linux/amd64",
+            ARCH_AARCH64: "linux/arm64",
+        }[arch]
+        target = {
+            TYPE_DOCKER: "docker",
+            TYPE_HA_ADDON: "hassio",
+            TYPE_LINT: "lint",
+        }[build_type]
+        return cls(
+            build_to=build_to,
+            manifest_to=prefix,
+            baseimgtype=baseimgtype,
+            platform=platform,
+            target=target,
+        )
+
+
+def main():
+    args = parser.parse_args()
+
+    def run_command(*cmd, ignore_error: bool = False):
+        print(f"$ {shlex.join(list(cmd))}")
+        if not args.dry_run:
+            rc = subprocess.call(list(cmd))
+            if rc != 0 and not ignore_error:
+                print("Command failed")
+                sys.exit(1)
+
+    # detect channel from tag
+    match = re.match(r"^(\d+\.\d+)(?:\.\d+)?(b\d+)?$", args.tag)
+    major_minor_version = None
+    if match is None:
+        channel = CHANNEL_DEV
+    elif match.group(2) is None:
+        major_minor_version = match.group(1)
+        channel = CHANNEL_RELEASE
+    else:
+        channel = CHANNEL_BETA
+
+    tags_to_push = [args.tag]
+    if channel == CHANNEL_DEV:
+        tags_to_push.append("dev")
+    elif channel == CHANNEL_BETA:
+        tags_to_push.append("beta")
+    elif channel == CHANNEL_RELEASE:
+        # Additionally push to beta
+        tags_to_push.append("beta")
+        tags_to_push.append("latest")
+
+        # Compatibility with HA tags
+        if major_minor_version:
+            tags_to_push.append("stable")
+            tags_to_push.append(major_minor_version)
+
+    if args.command == "build":
+        # 1. pull cache image
+        params = DockerParams.for_type_arch(args.build_type, args.arch)
+        cache_tag = {
+            CHANNEL_DEV: "cache-dev",
+            CHANNEL_BETA: "cache-beta",
+            CHANNEL_RELEASE: "cache-latest",
+        }[channel]
+        cache_img = f"ghcr.io/{params.build_to}:{cache_tag}"
+
+        imgs = [f"{params.build_to}:{tag}" for tag in tags_to_push]
+        imgs += [f"ghcr.io/{params.build_to}:{tag}" for tag in tags_to_push]
+
+        # 3. build
+        cmd = [
+            "docker",
+            "buildx",
+            "build",
+            "--build-arg",
+            f"BASEIMGTYPE={params.baseimgtype}",
+            "--build-arg",
+            f"BUILD_VERSION={args.tag}",
+            "--cache-from",
+            f"type=registry,ref={cache_img}",
+            "--file",
+            "docker/Dockerfile",
+            "--platform",
+            params.platform,
+            "--target",
+            params.target,
+        ]
+        for img in imgs:
+            cmd += ["--tag", img]
+        if args.push:
+            cmd += ["--push", "--cache-to", f"type=registry,ref={cache_img},mode=max"]
+        if args.load:
+            cmd += ["--load"]
+
+        run_command(*cmd, ".")
+    elif args.command == "manifest":
+        manifest = DockerParams.for_type_arch(args.build_type, ARCH_AMD64).manifest_to
+
+        targets = [f"{manifest}:{tag}" for tag in tags_to_push]
+        targets += [f"ghcr.io/{manifest}:{tag}" for tag in tags_to_push]
+        # 1. Create manifests
+        for target in targets:
+            cmd = ["docker", "manifest", "create", target]
+            for arch in ARCHS:
+                src = f"{DockerParams.for_type_arch(args.build_type, arch).build_to}:{args.tag}"
+                if target.startswith("ghcr.io"):
+                    src = f"ghcr.io/{src}"
+                cmd.append(src)
+            run_command(*cmd)
+        # 2. Push manifests
+        for target in targets:
+            run_command("docker", "manifest", "push", target)
+
+
+if __name__ == "__main__":
+    main()

docker/docker_entrypoint.sh

@@ -0,0 +1,30 @@
+#!/usr/bin/env bash
+
+# If /cache is mounted, use that as PIO's coredir
+# otherwise use path in /config (so that PIO packages aren't downloaded on each compile)
+
+if [[ -d /cache ]]; then
+    pio_cache_base=/cache/platformio
+else
+    pio_cache_base=/config/.esphome/platformio
+fi
+
+if [[ ! -d "${pio_cache_base}" ]]; then
+    echo "Creating cache directory ${pio_cache_base}"
+    echo "You can change this behavior by mounting a directory to the container's /cache directory."
+    mkdir -p "${pio_cache_base}"
+fi
+
+# we can't set core_dir, because the settings file is stored in `core_dir/appstate.json`
+# setting `core_dir` would therefore prevent pio from accessing
+export PLATFORMIO_PLATFORMS_DIR="${pio_cache_base}/platforms"
+export PLATFORMIO_PACKAGES_DIR="${pio_cache_base}/packages"
+export PLATFORMIO_CACHE_DIR="${pio_cache_base}/cache"
+
+# If /build is mounted, use that as the build path
+# otherwise use path in /config (so that builds aren't lost on container restart)
+if [[ -d /build ]]; then
+    export ESPHOME_BUILD_PATH=/build
+fi
+
+exec esphome "$@"

docker/generate_tags.py

@@ -0,0 +1,92 @@
+#!/usr/bin/env python3
+import argparse
+import re
+
+CHANNEL_DEV = "dev"
+CHANNEL_BETA = "beta"
+CHANNEL_RELEASE = "release"
+
+GHCR = "ghcr"
+DOCKERHUB = "dockerhub"
+
+parser = argparse.ArgumentParser()
+parser.add_argument(
+    "--tag",
+    type=str,
+    required=True,
+    help="The main docker tag to push to. If a version number also adds latest and/or beta tag",
+)
+parser.add_argument(
+    "--suffix",
+    type=str,
+    required=True,
+    help="The suffix of the tag.",
+)
+parser.add_argument(
+    "--registry",
+    type=str,
+    choices=[GHCR, DOCKERHUB],
+    required=False,
+    action="append",
+    help="The registry to build tags for.",
+)
+
+
+def main():
+    args = parser.parse_args()
+
+    # detect channel from tag
+    match = re.match(r"^(\d+\.\d+)(?:\.\d+)(?:(b\d+)|(-dev\d+))?$", args.tag)
+    major_minor_version = None
+    if match is None:  # eg 2023.12.0-dev20231109-testbranch
+        channel = None  # Ran with custom tag for a branch etc
+    elif match.group(3) is not None:  # eg 2023.12.0-dev20231109
+        channel = CHANNEL_DEV
+    elif match.group(2) is not None:  # eg 2023.12.0b1
+        channel = CHANNEL_BETA
+    else:  # eg 2023.12.0
+        major_minor_version = match.group(1)
+        channel = CHANNEL_RELEASE
+
+    tags_to_push = [args.tag]
+    if channel == CHANNEL_DEV:
+        tags_to_push.append("dev")
+    elif channel == CHANNEL_BETA:
+        tags_to_push.append("beta")
+    elif channel == CHANNEL_RELEASE:
+        # Additionally push to beta
+        tags_to_push.append("beta")
+        tags_to_push.append("latest")
+
+        if major_minor_version:
+            tags_to_push.append("stable")
+            tags_to_push.append(major_minor_version)
+
+    suffix = f"-{args.suffix}" if args.suffix else ""
+
+    image_name = f"esphome/esphome{suffix}"
+
+    print(f"channel={channel}")
+
+    if args.registry is None:
+        args.registry = [GHCR, DOCKERHUB]
+    elif len(args.registry) == 1:
+        if GHCR in args.registry:
+            print(f"image=ghcr.io/{image_name}")
+        if DOCKERHUB in args.registry:
+            print(f"image=docker.io/{image_name}")
+
+    print(f"image_name={image_name}")
+
+    full_tags = []
+
+    for tag in tags_to_push:
+        if GHCR in args.registry:
+            full_tags += [f"ghcr.io/{image_name}:{tag}"]
+        if DOCKERHUB in args.registry:
+            full_tags += [f"docker.io/{image_name}:{tag}"]
+    print(f"tags={','.join(full_tags)}")
+
+
+if __name__ == "__main__":
+    main()

docker/ha-addon-rootfs/etc/cont-init.d/30-esphome-fork.sh

@@ -0,0 +1,47 @@
+#!/usr/bin/with-contenv bashio
+# ==============================================================================
+# This file installs the user ESPHome fork if specified.
+# The fork must be up to date with the latest ESPHome dev branch
+# and have no conflicts.
+# This config option only exists in the ESPHome Dev add-on.
+# ==============================================================================
+
+declare esphome_fork
+
+if bashio::config.has_value 'esphome_fork'; then
+  esphome_fork=$(bashio::config 'esphome_fork')
+  # format: [username][/repository]:ref
+  if [[ "$esphome_fork" =~ ^(([^/]+)(/([^:]+))?:)?([^:/]+)$ ]]; then
+    username="${BASH_REMATCH[2]:-esphome}"
+    repository="${BASH_REMATCH[4]:-esphome}"
+    ref="${BASH_REMATCH[5]}"
+  else
+    bashio::exit.nok "Invalid esphome_fork format: $esphome_fork"
+  fi
+  full_url="https://github.com/${username}/${repository}/archive/${ref}.tar.gz"
+  bashio::log.info "Checking forked ESPHome"
+  dev_version=$(python3 -c "from esphome.const import __version__; print(__version__)")
+  bashio::log.info "Downloading ESPHome from fork '${esphome_fork}' (${full_url})..."
+  curl -L -o /tmp/esphome.tar.gz "${full_url}" -qq ||
+    bashio::exit.nok "Failed downloading ESPHome fork."
+  bashio::log.info "Installing ESPHome from fork '${esphome_fork}' (${full_url})..."
+  rm -rf /esphome || bashio::exit.nok "Failed to remove ESPHome."
+  mkdir /esphome
+  tar -zxf /tmp/esphome.tar.gz -C /esphome --strip-components=1 ||
+    bashio::exit.nok "Failed installing ESPHome from fork."
+  pip install -U -e /esphome || bashio::exit.nok "Failed installing ESPHome from fork."
+  rm -f /tmp/esphome.tar.gz
+  fork_version=$(python3 -c "from esphome.const import __version__; print(__version__)")
+
+  if [[ "$fork_version" != "$dev_version" ]]; then
+    bashio::log.error "############################"
+    bashio::log.error "Uninstalled fork as version does not match"
+    bashio::log.error "Update (or ask the author to update) the branch"
+    bashio::log.error "This is important as the dev addon and the dev ESPHome"
+    bashio::log.error "branch can have changes that are not compatible with old forks"
+    bashio::log.error "and get reported as bugs which we cannot solve easily."
+    bashio::log.error "############################"
+    bashio::exit.nok
+  fi
+  bashio::log.info "Installed ESPHome from fork '${esphome_fork}' (${full_url})..."
+fi

docker/ha-addon-rootfs/etc/nginx/includes/mime.types

@@ -0,0 +1,96 @@
+types {
+    text/html                                        html htm shtml;
+    text/css                                         css;
+    text/xml                                         xml;
+    image/gif                                        gif;
+    image/jpeg                                       jpeg jpg;
+    application/javascript                           js;
+    application/atom+xml                             atom;
+    application/rss+xml                              rss;
+
+    text/mathml                                      mml;
+    text/plain                                       txt;
+    text/vnd.sun.j2me.app-descriptor                 jad;
+    text/vnd.wap.wml                                 wml;
+    text/x-component                                 htc;
+
+    image/png                                        png;
+    image/svg+xml                                    svg svgz;
+    image/tiff                                       tif tiff;
+    image/vnd.wap.wbmp                               wbmp;
+    image/webp                                       webp;
+    image/x-icon                                     ico;
+    image/x-jng                                      jng;
+    image/x-ms-bmp                                   bmp;
+
+    font/woff                                        woff;
+    font/woff2                                       woff2;
+
+    application/java-archive                         jar war ear;
+    application/json                                 json;
+    application/mac-binhex40                         hqx;
+    application/msword                               doc;
+    application/pdf                                  pdf;
+    application/postscript                           ps eps ai;
+    application/rtf                                  rtf;
+    application/vnd.apple.mpegurl                    m3u8;
+    application/vnd.google-earth.kml+xml             kml;
+    application/vnd.google-earth.kmz                 kmz;
+    application/vnd.ms-excel                         xls;
+    application/vnd.ms-fontobject                    eot;
+    application/vnd.ms-powerpoint                    ppt;
+    application/vnd.oasis.opendocument.graphics      odg;
+    application/vnd.oasis.opendocument.presentation  odp;
+    application/vnd.oasis.opendocument.spreadsheet   ods;
+    application/vnd.oasis.opendocument.text          odt;
+    application/vnd.openxmlformats-officedocument.presentationml.presentation
+                                                     pptx;
+    application/vnd.openxmlformats-officedocument.spreadsheetml.sheet
+                                                     xlsx;
+    application/vnd.openxmlformats-officedocument.wordprocessingml.document
+                                                     docx;
+    application/vnd.wap.wmlc                         wmlc;
+    application/x-7z-compressed                      7z;
+    application/x-cocoa                              cco;
+    application/x-java-archive-diff                  jardiff;
+    application/x-java-jnlp-file                     jnlp;
+    application/x-makeself                           run;
+    application/x-perl                               pl pm;
+    application/x-pilot                              prc pdb;
+    application/x-rar-compressed                     rar;
+    application/x-redhat-package-manager             rpm;
+    application/x-sea                                sea;
+    application/x-shockwave-flash                    swf;
+    application/x-stuffit                            sit;
+    application/x-tcl                                tcl tk;
+    application/x-x509-ca-cert                       der pem crt;
+    application/x-xpinstall                          xpi;
+    application/xhtml+xml                            xhtml;
+    application/xspf+xml                             xspf;
+    application/zip                                  zip;
+
+    application/octet-stream                         bin exe dll;
+    application/octet-stream                         deb;
+    application/octet-stream                         dmg;
+    application/octet-stream                         iso img;
+    application/octet-stream                         msi msp msm;
+
+    audio/midi                                       mid midi kar;
+    audio/mpeg                                       mp3;
+    audio/ogg                                        ogg;
+    audio/x-m4a                                      m4a;
+    audio/x-realaudio                                ra;
+
+    video/3gpp                                       3gpp 3gp;
+    video/mp2t                                       ts;
+    video/mp4                                        mp4;
+    video/mpeg                                       mpeg mpg;
+    video/quicktime                                  mov;
+    video/webm                                       webm;
+    video/x-flv                                      flv;
+    video/x-m4v                                      m4v;
+    video/x-mng                                      mng;
+    video/x-ms-asf                                   asx asf;
+    video/x-ms-wmv                                   wmv;
+    video/x-msvideo                                  avi;
+}

docker/ha-addon-rootfs/etc/nginx/includes/proxy_params.conf

@@ -0,0 +1,16 @@
+proxy_http_version          1.1;
+proxy_ignore_client_abort   off;
+proxy_read_timeout          86400s;
+proxy_redirect              off;
+proxy_send_timeout          86400s;
+proxy_max_temp_file_size    0;
+
+proxy_set_header Accept-Encoding "";
+proxy_set_header Connection $connection_upgrade;
+proxy_set_header Host $http_host;
+proxy_set_header Upgrade $http_upgrade;
+proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
+proxy_set_header X-Forwarded-Proto $scheme;
+proxy_set_header X-NginX-Proxy true;
+proxy_set_header X-Real-IP $remote_addr;
+proxy_set_header Authorization "";

docker/ha-addon-rootfs/etc/nginx/includes/server_params.conf

@@ -0,0 +1,8 @@
+root            /dev/null;
+server_name     $hostname;
+
+client_max_body_size 512m;
+
+add_header X-Content-Type-Options nosniff;
+add_header X-XSS-Protection "1; mode=block";
+add_header X-Robots-Tag none;

docker/ha-addon-rootfs/etc/nginx/includes/ssl_params.conf

@@ -0,0 +1,8 @@
+ssl_protocols TLSv1.2 TLSv1.3;
+ssl_prefer_server_ciphers off;
+ssl_ciphers ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES256-GCM-SHA384;
+ssl_session_timeout  10m;
+ssl_session_cache shared:SSL:10m;
+ssl_session_tickets off;
+ssl_stapling on;
+ssl_stapling_verify on;

docker/ha-addon-rootfs/etc/nginx/includes/upstream.conf

@@ -0,0 +1,3 @@
+upstream esphome {
+    server unix:/var/run/esphome.sock;
+}

docker/ha-addon-rootfs/etc/nginx/nginx.conf

@@ -0,0 +1,30 @@
+daemon off;
+user root;
+pid /var/run/nginx.pid;
+worker_processes 1;
+error_log /proc/1/fd/1 error;
+events {
+    worker_connections 1024;
+}
+
+http {
+    include /etc/nginx/includes/mime.types;
+
+    access_log              off;
+    default_type            application/octet-stream;
+    gzip                    on;
+    keepalive_timeout       65;
+    sendfile                on;
+    server_tokens           off;
+
+    tcp_nodelay             on;
+    tcp_nopush              on;
+
+    map $http_upgrade $connection_upgrade {
+        default upgrade;
+        ''      close;
+    }
+
+    include /etc/nginx/includes/upstream.conf;
+    include /etc/nginx/servers/*.conf;
+}

docker/ha-addon-rootfs/etc/nginx/servers/.gitkeep

@@ -0,0 +1 @@
+Without requirements or design, programming is the art of adding bugs to an empty text file. (Louis Srygley)

docker/ha-addon-rootfs/etc/nginx/templates/direct.gtpl

@@ -0,0 +1,28 @@
+server {
+    {{ if not .ssl }}
+    listen 6052 default_server;
+    {{ else }}
+    listen 6052 default_server ssl http2;
+    {{ end }}
+
+    include /etc/nginx/includes/server_params.conf;
+    include /etc/nginx/includes/proxy_params.conf;
+
+    {{ if .ssl }}
+    include /etc/nginx/includes/ssl_params.conf;
+
+    ssl_certificate /ssl/{{ .certfile }};
+    ssl_certificate_key /ssl/{{ .keyfile }};
+
+    # Redirect http requests to https on the same port.
+    # https://rageagainstshell.com/2016/11/redirect-http-to-https-on-the-same-port-in-nginx/
+    error_page 497 https://$http_host$request_uri;
+    {{ end }}
+
+    # Clear Home Assistant Ingress header
+    proxy_set_header X-HA-Ingress "";
+
+    location / {
+        proxy_pass http://esphome;
+    }
+}

docker/ha-addon-rootfs/etc/nginx/templates/ingress.gtpl

@@ -0,0 +1,18 @@
+server {
+    listen 127.0.0.1:{{ .port }} default_server;
+    listen {{ .interface }}:{{ .port }} default_server;
+
+    include /etc/nginx/includes/server_params.conf;
+    include /etc/nginx/includes/proxy_params.conf;
+
+    # Set Home Assistant Ingress header
+    proxy_set_header X-HA-Ingress "YES";
+
+    location / {
+        allow   172.30.32.2;
+        allow   127.0.0.1;
+        deny    all;
+
+        proxy_pass http://esphome;
+    }
+}

docker/ha-addon-rootfs/etc/s6-overlay/s6-rc.d/discovery/run

@@ -0,0 +1,32 @@
+#!/command/with-contenv bashio
+# shellcheck shell=bash
+# ==============================================================================
+# Home Assistant Add-on: ESPHome
+# Sends discovery information to Home Assistant.
+# ==============================================================================
+declare config
+declare port
+
+# We only disable it when disabled explicitly
+if bashio::config.false 'home_assistant_dashboard_integration';
+then
+    bashio::log.info "Home Assistant discovery is disabled for this add-on."
+    bashio::exit.ok
+fi
+
+port=$(bashio::addon.ingress_port)
+
+# Wait for NGINX to become available
+bashio::net.wait_for "${port}" "127.0.0.1" 300
+
+config=$(\
+    bashio::var.json \
+        host "127.0.0.1" \
+        port "^${port}" \
+)
+
+if bashio::discovery "esphome" "${config}" > /dev/null; then
+    bashio::log.info "Successfully send discovery information to Home Assistant."
+else
+    bashio::log.error "Discovery message to Home Assistant failed!"
+fi

docker/ha-addon-rootfs/etc/s6-overlay/s6-rc.d/discovery/type

@@ -0,0 +1 @@
+oneshot

docker/ha-addon-rootfs/etc/s6-overlay/s6-rc.d/discovery/up

@@ -0,0 +1 @@
+/etc/s6-overlay/s6-rc.d/discovery/run

docker/ha-addon-rootfs/etc/s6-overlay/s6-rc.d/esphome/finish

@@ -0,0 +1,26 @@
+#!/command/with-contenv bashio
+# shellcheck shell=bash
+# ==============================================================================
+# Home Assistant Community Add-on: ESPHome
+# Take down the S6 supervision tree when ESPHome dashboard fails
+# ==============================================================================
+declare exit_code
+readonly exit_code_container=$(</run/s6-linux-init-container-results/exitcode)
+readonly exit_code_service="${1}"
+readonly exit_code_signal="${2}"
+
+bashio::log.info \
+  "Service ESPHome dashboard exited with code ${exit_code_service}" \
+  "(by signal ${exit_code_signal})"
+
+if [[ "${exit_code_service}" -eq 256 ]]; then
+  if [[ "${exit_code_container}" -eq 0 ]]; then
+    echo $((128 + $exit_code_signal)) > /run/s6-linux-init-container-results/exitcode
+  fi
+  [[ "${exit_code_signal}" -eq 15 ]] && exec /run/s6/basedir/bin/halt
+elif [[ "${exit_code_service}" -ne 0 ]]; then
+  if [[ "${exit_code_container}" -eq 0 ]]; then
+    echo "${exit_code_service}" > /run/s6-linux-init-container-results/exitcode
+  fi
+  exec /run/s6/basedir/bin/halt
+fi

docker/ha-addon-rootfs/etc/s6-overlay/s6-rc.d/esphome/run

@@ -0,0 +1,53 @@
+#!/command/with-contenv bashio
+# shellcheck shell=bash
+# ==============================================================================
+# Community Hass.io Add-ons: ESPHome
+# Runs the ESPHome dashboard
+# ==============================================================================
+readonly pio_cache_base=/data/cache/platformio
+
+export ESPHOME_IS_HA_ADDON=true
+export PLATFORMIO_GLOBALLIB_DIR=/piolibs
+
+# we can't set core_dir, because the settings file is stored in `core_dir/appstate.json`
+# setting `core_dir` would therefore prevent pio from accessing
+export PLATFORMIO_PLATFORMS_DIR="${pio_cache_base}/platforms"
+export PLATFORMIO_PACKAGES_DIR="${pio_cache_base}/packages"
+export PLATFORMIO_CACHE_DIR="${pio_cache_base}/cache"
+
+if bashio::config.true 'leave_front_door_open'; then
+    export DISABLE_HA_AUTHENTICATION=true
+fi
+
+if bashio::config.true 'streamer_mode'; then
+    export ESPHOME_STREAMER_MODE=true
+fi
+
+if bashio::config.has_value 'relative_url'; then
+    export ESPHOME_DASHBOARD_RELATIVE_URL=$(bashio::config 'relative_url')
+fi
+
+if bashio::config.has_value 'default_compile_process_limit'; then
+    export ESPHOME_DEFAULT_COMPILE_PROCESS_LIMIT=$(bashio::config 'default_compile_process_limit')
+else
+    if grep -q 'Raspberry Pi 3' /proc/cpuinfo; then
+        export ESPHOME_DEFAULT_COMPILE_PROCESS_LIMIT=1
+    fi
+fi
+
+mkdir -p "${pio_cache_base}"
+
+mkdir -p /config/esphome
+
+if bashio::fs.directory_exists '/config/esphome/.esphome'; then
+    bashio::log.info "Migrating old .esphome directory..."
+    if bashio::fs.file_exists '/config/esphome/.esphome/esphome.json'; then
+        mv /config/esphome/.esphome/esphome.json /data/esphome.json
+    fi
+    mkdir -p "/data/storage"
+    mv /config/esphome/.esphome/*.json /data/storage/ || true
+    rm -rf /config/esphome/.esphome
+fi
+
+bashio::log.info "Starting ESPHome dashboard..."
+exec esphome dashboard /config/esphome --socket /var/run/esphome.sock --ha-addon

docker/ha-addon-rootfs/etc/s6-overlay/s6-rc.d/esphome/type

@@ -0,0 +1 @@
+longrun

docker/ha-addon-rootfs/etc/s6-overlay/s6-rc.d/init-nginx/run

@@ -0,0 +1,27 @@
+#!/command/with-contenv bashio
+# shellcheck shell=bash
+# ==============================================================================
+# Community Hass.io Add-ons: ESPHome
+# Configures NGINX for use with ESPHome
+# ==============================================================================
+mkdir -p /var/log/nginx
+
+# Generate Ingress configuration
+bashio::var.json \
+    interface "$(bashio::addon.ip_address)" \
+    port "^$(bashio::addon.ingress_port)" \
+    | tempio \
+        -template /etc/nginx/templates/ingress.gtpl \
+        -out /etc/nginx/servers/ingress.conf
+
+# Generate direct access configuration, if enabled.
+if bashio::var.has_value "$(bashio::addon.port 6052)"; then
+    bashio::config.require.ssl
+    bashio::var.json \
+        certfile "$(bashio::config 'certfile')" \
+        keyfile "$(bashio::config 'keyfile')" \
+        ssl "^$(bashio::config 'ssl')" \
+        | tempio \
+            -template /etc/nginx/templates/direct.gtpl \
+            -out /etc/nginx/servers/direct.conf
+fi

docker/ha-addon-rootfs/etc/s6-overlay/s6-rc.d/init-nginx/type

@@ -0,0 +1 @@
+oneshot

docker/ha-addon-rootfs/etc/s6-overlay/s6-rc.d/init-nginx/up

@@ -0,0 +1 @@
+/etc/s6-overlay/s6-rc.d/init-nginx/run

docker/ha-addon-rootfs/etc/s6-overlay/s6-rc.d/nginx/finish

@@ -0,0 +1,25 @@
+#!/command/with-contenv bashio
+# ==============================================================================
+# Community Hass.io Add-ons: ESPHome
+# Take down the S6 supervision tree when NGINX fails
+# ==============================================================================
+declare exit_code
+readonly exit_code_container=$(</run/s6-linux-init-container-results/exitcode)
+readonly exit_code_service="${1}"
+readonly exit_code_signal="${2}"
+
+bashio::log.info \
+  "Service NGINX exited with code ${exit_code_service}" \
+  "(by signal ${exit_code_signal})"
+
+if [[ "${exit_code_service}" -eq 256 ]]; then
+  if [[ "${exit_code_container}" -eq 0 ]]; then
+    echo $((128 + $exit_code_signal)) > /run/s6-linux-init-container-results/exitcode
+  fi
+  [[ "${exit_code_signal}" -eq 15 ]] && exec /run/s6/basedir/bin/halt
+elif [[ "${exit_code_service}" -ne 0 ]]; then
+  if [[ "${exit_code_container}" -eq 0 ]]; then
+    echo "${exit_code_service}" > /run/s6-linux-init-container-results/exitcode
+  fi
+  exec /run/s6/basedir/bin/halt
+fi

docker/ha-addon-rootfs/etc/s6-overlay/s6-rc.d/nginx/run

@@ -0,0 +1,15 @@
+#!/command/with-contenv bashio
+# shellcheck shell=bash
+# ==============================================================================
+# Community Hass.io Add-ons: ESPHome
+# Runs the NGINX proxy
+# ==============================================================================
+
+bashio::log.info "Waiting for ESPHome dashboard to come up..."
+
+while [[ ! -S /var/run/esphome.sock ]]; do
+  sleep 0.5
+done
+
+bashio::log.info "Starting NGINX..."
+exec nginx

docker/ha-addon-rootfs/etc/s6-overlay/s6-rc.d/nginx/type

@@ -0,0 +1 @@
+longrun

docker/hooks/build

@@ -1,26 +0,0 @@
-#!/usr/bin/env bash
-
-# the Docker repository tag being built.
-declare CACHE_TAG
-echo "CACHE_TAG: ${CACHE_TAG}"
-# the name and tag of the Docker repository being built. (This variable is a combination of DOCKER_REPO:CACHE_TAG.)
-declare IMAGE_NAME
-echo "IMAGE_NAME: ${IMAGE_NAME}"
-# the architecture to build
-declare BUILD_ARCH
-echo "BUILD_ARCH: ${BUILD_ARCH}"
-# whether this is a hassio build
-declare IS_HASSIO
-echo "IS_HASSIO: ${IS_HASSIO}"
-echo "PWD: $PWD"
-
-if [[ ${IS_HASSIO} = "YES" ]]; then
-    docker build \
-      --build-arg "BUILD_FROM=esphome/esphome-hassio-base-${BUILD_ARCH}:1.2.1" \
-      --build-arg "BUILD_VERSION=${CACHE_TAG}" \
-      -t "${IMAGE_NAME}" -f ../docker/Dockerfile.hassio ..
-else
-    docker build \
-      --build-arg "BUILD_FROM=esphome/esphome-base-${BUILD_ARCH}:1.2.1" \
-      -t "${IMAGE_NAME}" -f ../docker/Dockerfile ..
-fi

docker/hooks/pre_build

@@ -1,18 +0,0 @@
-#!/usr/bin/env bash
-
-# the architecture to build
-declare BUILD_ARCH
-
-echo "BUILD_ARCH: ${BUILD_ARCH}"
-
-if [[ ${BUILD_ARCH} = "amd64" ]]; then
-    echo "No qemu required..."
-    exit 0
-fi
-if [[ ${BUILD_ARCH} = "i386" ]]; then
-    echo "No qemu required..."
-    exit 0
-fi
-
-echo "Installing qemu..."
-docker run --rm --privileged multiarch/qemu-user-static:register --reset

docker/platformio.ini

@@ -1,12 +0,0 @@
-; This file allows the docker build file to install the required platformio
-; platforms
-
-[env:espressif8266]
-platform = espressif8266@1.8.0
-board = nodemcuv2
-framework = arduino
-
-[env:espressif32]
-platform = espressif32@1.5.0
-board = nodemcu-32s
-framework = arduino

docker/rootfs/etc/cont-init.d/10-requirements.sh

@@ -1,35 +0,0 @@
-#!/usr/bin/with-contenv bash
-# ==============================================================================
-# Community Hass.io Add-ons: ESPHome
-# This files check if all user configuration requirements are met
-# ==============================================================================
-# shellcheck disable=SC1091
-source /usr/lib/hassio-addons/base.sh
-
-# Check SSL requirements, if enabled
-if hass.config.true 'ssl'; then
-    if ! hass.config.has_value 'certfile'; then
-        hass.die 'SSL is enabled, but no certfile was specified.'
-    fi
-
-    if ! hass.config.has_value 'keyfile'; then
-        hass.die 'SSL is enabled, but no keyfile was specified'
-    fi
-
-    if ! hass.file_exists "/ssl/$(hass.config.get 'certfile')"; then
-        if ! hass.file_exists "/ssl/$(hass.config.get 'keyfile')"; then
-            # Both files are missing, let's print a friendlier error message
-            text="You enabled encrypted connections using the \"ssl\": true option.
-            However, the SSL files \"$(hass.config.get 'certfile')\" and \"$(hass.config.get 'keyfile')\"
-            were not found. If you're using Hass.io on your local network and don't want
-            to encrypt connections to the ESPHome dashboard, you can manually disable
-            SSL by setting \"ssl\" to false."
-            hass.die "${text}"
-        fi
-        hass.die 'The configured certfile is not found'
-    fi
-
-    if ! hass.file_exists "/ssl/$(hass.config.get 'keyfile')"; then
-        hass.die 'The configured keyfile is not found'
-    fi
-fi

docker/rootfs/etc/cont-init.d/20-nginx.sh

@@ -1,28 +0,0 @@
-#!/usr/bin/with-contenv bash
-# ==============================================================================
-# Community Hass.io Add-ons: ESPHome
-# Configures NGINX for use with ESPHome
-# ==============================================================================
-# shellcheck disable=SC1091
-source /usr/lib/hassio-addons/base.sh
-
-declare certfile
-declare keyfile
-declare port
-
-mkdir -p /var/log/nginx
-
-# Enable SSL
-if hass.config.true 'ssl'; then
-    rm /etc/nginx/nginx.conf
-    mv /etc/nginx/nginx-ssl.conf /etc/nginx/nginx.conf
-
-    certfile=$(hass.config.get 'certfile')
-    keyfile=$(hass.config.get 'keyfile')
-
-    sed -i "s/%%certfile%%/${certfile}/g" /etc/nginx/nginx.conf
-    sed -i "s/%%keyfile%%/${keyfile}/g" /etc/nginx/nginx.conf
-fi
-
-port=$(hass.config.get 'port')
-sed -i "s/%%port%%/${port}/g" /etc/nginx/nginx.conf

docker/rootfs/etc/cont-init.d/30-esphome.sh

@@ -1,14 +0,0 @@
-#!/usr/bin/with-contenv bash
-# ==============================================================================
-# Community Hass.io Add-ons: ESPHome
-# This files installs the user ESPHome version if specified
-# ==============================================================================
-# shellcheck disable=SC1091
-source /usr/lib/hassio-addons/base.sh
-
-declare esphome_version
-
-if hass.config.has_value 'esphome_version'; then
-    esphome_version=$(hass.config.get 'esphome_version')
-    pip2 install --no-cache-dir --no-binary :all: "https://github.com/esphome/esphome/archive/${esphome_version}.zip"
-fi

docker/rootfs/etc/cont-init.d/40-migrate.sh

@@ -1,13 +0,0 @@
-#!/usr/bin/with-contenv bash
-# ==============================================================================
-# Community Hass.io Add-ons: ESPHome
-# This files migrates the esphome config directory from the old path
-# ==============================================================================
-# shellcheck disable=SC1091
-source /usr/lib/hassio-addons/base.sh
-
-if [[ ! -d /config/esphome && -d /config/esphomeyaml ]]; then
-    echo "Moving config directory from /config/esphomeyaml to /config/esphome"
-    mv /config/esphomeyaml /config/esphome
-    mv /config/esphome/.esphomeyaml /config/esphome/.esphome
-fi

docker/rootfs/etc/nginx/nginx-ssl.conf

@@ -1,62 +0,0 @@
-worker_processes  1;
-pid /var/run/nginx.pid;
-error_log stderr;
-
-events {
-    worker_connections  1024;
-}
-
-http {
-    access_log         stdout;
-    include            mime.types;
-    default_type       application/octet-stream;
-    sendfile           on;
-    keepalive_timeout  65;
-
-    upstream esphome {
-        ip_hash;
-        server unix:/var/run/esphome.sock;
-    }
-    map $http_upgrade $connection_upgrade {
-        default upgrade;
-        ''      close;
-    }
-
-    server {
-        server_name hassio.local;
-        listen %%port%% default_server ssl;
-        root /dev/null;
-
-        ssl_certificate /ssl/%%certfile%%;
-        ssl_certificate_key /ssl/%%keyfile%%;
-        ssl_protocols TLSv1.2;
-        ssl_prefer_server_ciphers on;
-        ssl_ciphers ECDHE-RSA-AES256-GCM-SHA512:DHE-RSA-AES256-GCM-SHA512:ECDHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-SHA384:ECDHE-RSA-AES256-SHA:DHE-RSA-AES256-SHA;
-        ssl_ecdh_curve secp384r1;
-        ssl_session_timeout  10m;
-        ssl_session_cache shared:SSL:10m;
-        ssl_session_tickets off;
-        ssl_stapling on;
-        ssl_stapling_verify on;
-
-        # Redirect http requests to https on the same port.
-        # https://rageagainstshell.com/2016/11/redirect-http-to-https-on-the-same-port-in-nginx/
-        error_page 497 https://$http_host$request_uri;
-
-        location / {
-            proxy_redirect off;
-            proxy_pass http://esphome;
-
-            proxy_http_version 1.1;
-            proxy_set_header Upgrade $http_upgrade;
-            proxy_set_header Connection $connection_upgrade;
-            proxy_set_header Authorization "";
-
-            proxy_set_header X-Real-IP $remote_addr;
-            proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
-            proxy_set_header X-Forwarded-Proto $scheme;
-            proxy_set_header Host $http_host;
-            proxy_set_header X-NginX-Proxy true;
-        }
-    }
-}

docker/rootfs/etc/nginx/nginx.conf

@@ -1,46 +0,0 @@
-worker_processes  1;
-pid /var/run/nginx.pid;
-error_log stderr;
-
-events {
-    worker_connections  1024;
-}
-
-http {
-    access_log         stdout;
-    include            mime.types;
-    default_type       application/octet-stream;
-    sendfile           on;
-    keepalive_timeout  65;
-
-    upstream esphome {
-        ip_hash;
-        server unix:/var/run/esphome.sock;
-    }
-    map $http_upgrade $connection_upgrade {
-        default upgrade;
-        ''      close;
-    }
-
-    server {
-        server_name hassio.local;
-        listen %%port%% default_server;
-        root /dev/null;
-
-        location / {
-            proxy_redirect off;
-            proxy_pass http://esphome;
-
-            proxy_http_version 1.1;
-            proxy_set_header Upgrade $http_upgrade;
-            proxy_set_header Connection $connection_upgrade;
-            proxy_set_header Authorization "";
-
-            proxy_set_header X-Real-IP $remote_addr;
-            proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
-            proxy_set_header X-Forwarded-Proto $scheme;
-            proxy_set_header Host $http_host;
-            proxy_set_header X-NginX-Proxy true;
-        }
-    }
-}

docker/rootfs/etc/services.d/esphome/finish

@@ -1,9 +0,0 @@
-#!/usr/bin/execlineb -S0
-# ==============================================================================
-# Community Hass.io Add-ons: ESPHome
-# Take down the S6 supervision tree when ESPHome fails
-# ==============================================================================
-if -n { s6-test $# -ne 0 }
-if -n { s6-test ${1} -eq 256 }
-
-s6-svscanctl -t /var/run/s6/services

docker/rootfs/etc/services.d/esphome/run

@@ -1,14 +0,0 @@
-#!/usr/bin/with-contenv bash
-# ==============================================================================
-# Community Hass.io Add-ons: ESPHome
-# Runs the ESPHome dashboard
-# ==============================================================================
-# shellcheck disable=SC1091
-source /usr/lib/hassio-addons/base.sh
-
-if hass.config.true 'leave_front_door_open'; then
-    export DISABLE_HA_AUTHENTICATION=true
-fi
-
-hass.log.info "Starting ESPHome dashboard..."
-exec esphome /config/esphome dashboard --socket /var/run/esphome.sock --hassio

docker/rootfs/etc/services.d/nginx/finish

@@ -1,9 +0,0 @@
-#!/usr/bin/execlineb -S0
-# ==============================================================================
-# Community Hass.io Add-ons: ESPHome
-# Take down the S6 supervision tree when NGINX fails
-# ==============================================================================
-if -n { s6-test $# -ne 0 }
-if -n { s6-test ${1} -eq 256 }
-
-s6-svscanctl -t /var/run/s6/services

docker/rootfs/etc/services.d/nginx/run

@@ -1,10 +0,0 @@
-#!/usr/bin/with-contenv bash
-# ==============================================================================
-# Community Hass.io Add-ons: ESPHome
-# Runs the NGINX proxy
-# ==============================================================================
-# shellcheck disable=SC1091
-source /usr/lib/hassio-addons/base.sh
-
-hass.log.info "Starting NGINX..."
-exec nginx -g "daemon off;"

esphome/api/api.proto

@@ -1,330 +0,0 @@
-syntax = "proto3";
-
-// The Home Assistant protocol is structured as a simple
-// TCP socket with short binary messages encoded in the protocol buffers format
-// First, a message in this protocol has a specific format:
-//  * VarInt denoting the size of the message object. (type is not part of this)
-//  * VarInt denoting the type of message.
-//  * The message object encoded as a ProtoBuf message
-
-// The connection is established in 4 steps:
-//  * First, the client connects to the server and sends a "Hello Request" identifying itself
-//  * The server responds with a "Hello Response" and selects the protocol version
-//  * After receiving this message, the client attempts to authenticate itself using
-//    the password and a "Connect Request"
-//  * The server responds with a "Connect Response" and notifies of invalid password.
-// If anything in this initial process fails, the connection must immediately closed
-// by both sides and _no_ disconnection message is to be sent.
-
-// Message sent at the beginning of each connection
-// Can only be sent by the client and only at the beginning of the connection
-message HelloRequest {
-  // Description of client (like User Agent)
-  // For example "Home Assistant"
-  // Not strictly necessary to send but nice for debugging
-  // purposes.
-  string client_info = 1;
-}
-
-// Confirmation of successful connection request.
-// Can only be sent by the server and only at the beginning of the connection
-message HelloResponse {
-  // The version of the API to use. The _client_ (for example Home Assistant) needs to check
-  // for compatibility and if necessary adopt to an older API.
-  // Major is for breaking changes in the base protocol - a mismatch will lead to immediate disconnect_client_
-  // Minor is for breaking changes in individual messages - a mismatch will lead to a warning message
-  uint32 api_version_major = 1;
-  uint32 api_version_minor = 2;
-
-  // A string identifying the server (ESP); like client info this may be empty
-  // and only exists for debugging/logging purposes.
-  // For example "ESPHome v1.10.0 on ESP8266"
-  string server_info = 3;
-}
-
-// Message sent at the beginning of each connection to authenticate the client
-// Can only be sent by the client and only at the beginning of the connection
-message ConnectRequest {
-  // The password to log in with
-  string password = 1;
-}
-
-// Confirmation of successful connection. After this the connection is available for all traffic.
-// Can only be sent by the server and only at the beginning of the connection
-message ConnectResponse {
-  bool invalid_password = 1;
-}
-
-// Request to close the connection.
-// Can be sent by both the client and server
-message DisconnectRequest {
-  // Do not close the connection before the acknowledgement arrives
-}
-
-message DisconnectResponse {
-  // Empty - Both parties are required to close the connection after this
-  // message has been received.
-}
-
-message PingRequest {
-  // Empty
-}
-
-message PingResponse {
-  // Empty
-}
-
-message DeviceInfoRequest {
-  // Empty
-}
-
-message DeviceInfoResponse {
-  bool uses_password = 1;
-
-  // The name of the node, given by "App.set_name()"
-  string name = 2;
-
-  // The mac address of the device. For example "AC:BC:32:89:0E:A9"
-  string mac_address = 3;
-
-  // A string describing the ESPHome version. For example "1.10.0"
-  string esphome_core_version = 4;
-
-  // A string describing the date of compilation, this is generated by the compiler
-  // and therefore may not be in the same format all the time.
-  // If the user isn't using esphome, this will also not be set.
-  string compilation_time = 5;
-
-  // The model of the board. For example NodeMCU
-  string model = 6;
-
-  bool has_deep_sleep = 7;
-}
-
-message ListEntitiesRequest {
-  // Empty
-}
-
-message ListEntitiesBinarySensorResponse {
-  string object_id = 1;
-  fixed32 key = 2;
-  string name = 3;
-  string unique_id = 4;
-
-  string device_class = 5;
-  bool is_status_binary_sensor = 6;
-}
-message ListEntitiesCoverResponse {
-  string object_id = 1;
-  fixed32 key = 2;
-  string name = 3;
-  string unique_id = 4;
-
-  bool is_optimistic = 5;
-}
-message ListEntitiesFanResponse {
-  string object_id = 1;
-  fixed32 key = 2;
-  string name = 3;
-  string unique_id = 4;
-
-  bool supports_oscillation = 5;
-  bool supports_speed = 6;
-}
-message ListEntitiesLightResponse {
-  string object_id = 1;
-  fixed32 key = 2;
-  string name = 3;
-  string unique_id = 4;
-
-  bool supports_brightness = 5;
-  bool supports_rgb = 6;
-  bool supports_white_value = 7;
-  bool supports_color_temperature = 8;
-  float min_mireds = 9;
-  float max_mireds = 10;
-  repeated string effects = 11;
-}
-message ListEntitiesSensorResponse {
-  string object_id = 1;
-  fixed32 key = 2;
-  string name = 3;
-  string unique_id = 4;
-
-  string icon = 5;
-  string unit_of_measurement = 6;
-  int32 accuracy_decimals = 7;
-}
-message ListEntitiesSwitchResponse {
-  string object_id = 1;
-  fixed32 key = 2;
-  string name = 3;
-  string unique_id = 4;
-
-  string icon = 5;
-  bool optimistic = 6;
-}
-message ListEntitiesTextSensorResponse {
-  string object_id = 1;
-  fixed32 key = 2;
-  string name = 3;
-  string unique_id = 4;
-
-  string icon = 5;
-}
-message ListEntitiesDoneResponse {
-  // Empty
-}
-
-message SubscribeStatesRequest {
-  // Empty
-}
-message BinarySensorStateResponse {
-  fixed32 key = 1;
-  bool state = 2;
-}
-message CoverStateResponse {
-  fixed32 key = 1;
-  enum CoverState {
-    OPEN = 0;
-    CLOSED = 1;
-  }
-  CoverState state = 2;
-}
-enum FanSpeed {
-  LOW = 0;
-  MEDIUM = 1;
-  HIGH = 2;
-}
-message FanStateResponse {
-  fixed32 key = 1;
-  bool state = 2;
-  bool oscillating = 3;
-  FanSpeed speed = 4;
-}
-message LightStateResponse {
-  fixed32 key = 1;
-  bool state = 2;
-  float brightness = 3;
-  float red = 4;
-  float green = 5;
-  float blue = 6;
-  float white = 7;
-  float color_temperature = 8;
-  string effect = 9;
-}
-message SensorStateResponse {
-  fixed32 key = 1;
-  float state = 2;
-}
-message SwitchStateResponse {
-  fixed32 key = 1;
-  bool state = 2;
-}
-message TextSensorStateResponse {
-  fixed32 key = 1;
-  string state = 2;
-}
-
-message CoverCommandRequest {
-  fixed32 key = 1;
-  enum CoverCommand {
-    OPEN = 0;
-    CLOSE = 1;
-    STOP = 2;
-  }
-  bool has_state = 2;
-  CoverCommand command = 3;
-}
-message FanCommandRequest {
-  fixed32 key = 1;
-  bool has_state = 2;
-  bool state = 3;
-  bool has_speed = 4;
-  FanSpeed speed = 5;
-  bool has_oscillating = 6;
-  bool oscillating = 7;
-}
-message LightCommandRequest {
-  fixed32 key = 1;
-  bool has_state = 2;
-  bool state = 3;
-  bool has_brightness = 4;
-  float brightness = 5;
-  bool has_rgb = 6;
-  float red = 7;
-  float green = 8;
-  float blue = 9;
-  bool has_white = 10;
-  float white = 11;
-  bool has_color_temperature = 12;
-  float color_temperature = 13;
-  bool has_transition_length = 14;
-  uint32 transition_length = 15;
-  bool has_flash_length = 16;
-  uint32 flash_length = 17;
-  bool has_effect = 18;
-  string effect = 19;
-}
-message SwitchCommandRequest {
-  fixed32 key = 1;
-  bool state = 2;
-}
-
-enum LogLevel {
-  NONE = 0;
-  ERROR = 1;
-  WARN = 2;
-  INFO = 3;
-  DEBUG = 4;
-  VERBOSE = 5;
-  VERY_VERBOSE = 6;
-}
-
-message SubscribeLogsRequest {
-  LogLevel level = 1;
-  bool dump_config = 2;
-}
-
-message SubscribeLogsResponse {
-  LogLevel level = 1;
-  string tag = 2;
-  string message = 3;
-  bool send_failed = 4;
-}
-
-message SubscribeServiceCallsRequest {
-
-}
-
-message ServiceCallResponse {
-  string service = 1;
-  map<string, string> data = 2;
-  map<string, string> data_template = 3;
-  map<string, string> variables = 4;
-}
-
-// 1. Client sends SubscribeHomeAssistantStatesRequest
-// 2. Server responds with zero or more SubscribeHomeAssistantStateResponse (async)
-// 3. Client sends HomeAssistantStateResponse for state changes.
-message SubscribeHomeAssistantStatesRequest {
-
-}
-
-message SubscribeHomeAssistantStateResponse {
-  string entity_id = 1;
-}
-
-message HomeAssistantStateResponse {
-  string entity_id = 1;
-  string state = 2;
-}
-
-message GetTimeRequest {
-
-}
-
-message GetTimeResponse {
-  fixed32 epoch_seconds = 1;
-}
-

esphome/api/client.py

@@ -1,495 +0,0 @@
-from datetime import datetime
-import functools
-import logging
-import socket
-import threading
-import time
-
-# pylint: disable=unused-import
-from typing import Optional  # noqa
-from google.protobuf import message  # noqa
-
-from esphome import const
-import esphome.api.api_pb2 as pb
-from esphome.const import CONF_PASSWORD, CONF_PORT
-from esphome.core import EsphomeError
-from esphome.helpers import resolve_ip_address, indent, color
-from esphome.py_compat import text_type, IS_PY2, byte_to_bytes, char_to_byte, format_bytes
-from esphome.util import safe_print
-
-_LOGGER = logging.getLogger(__name__)
-
-
-class APIConnectionError(EsphomeError):
-    pass
-
-
-MESSAGE_TYPE_TO_PROTO = {
-    1: pb.HelloRequest,
-    2: pb.HelloResponse,
-    3: pb.ConnectRequest,
-    4: pb.ConnectResponse,
-    5: pb.DisconnectRequest,
-    6: pb.DisconnectResponse,
-    7: pb.PingRequest,
-    8: pb.PingResponse,
-    9: pb.DeviceInfoRequest,
-    10: pb.DeviceInfoResponse,
-    11: pb.ListEntitiesRequest,
-    12: pb.ListEntitiesBinarySensorResponse,
-    13: pb.ListEntitiesCoverResponse,
-    14: pb.ListEntitiesFanResponse,
-    15: pb.ListEntitiesLightResponse,
-    16: pb.ListEntitiesSensorResponse,
-    17: pb.ListEntitiesSwitchResponse,
-    18: pb.ListEntitiesTextSensorResponse,
-    19: pb.ListEntitiesDoneResponse,
-    20: pb.SubscribeStatesRequest,
-    21: pb.BinarySensorStateResponse,
-    22: pb.CoverStateResponse,
-    23: pb.FanStateResponse,
-    24: pb.LightStateResponse,
-    25: pb.SensorStateResponse,
-    26: pb.SwitchStateResponse,
-    27: pb.TextSensorStateResponse,
-    28: pb.SubscribeLogsRequest,
-    29: pb.SubscribeLogsResponse,
-    30: pb.CoverCommandRequest,
-    31: pb.FanCommandRequest,
-    32: pb.LightCommandRequest,
-    33: pb.SwitchCommandRequest,
-    34: pb.SubscribeServiceCallsRequest,
-    35: pb.ServiceCallResponse,
-    36: pb.GetTimeRequest,
-    37: pb.GetTimeResponse,
-}
-
-
-def _varuint_to_bytes(value):
-    if value <= 0x7F:
-        return byte_to_bytes(value)
-
-    ret = bytes()
-    while value:
-        temp = value & 0x7F
-        value >>= 7
-        if value:
-            ret += byte_to_bytes(temp | 0x80)
-        else:
-            ret += byte_to_bytes(temp)
-
-    return ret
-
-
-def _bytes_to_varuint(value):
-    result = 0
-    bitpos = 0
-    for c in value:
-        val = char_to_byte(c)
-        result |= (val & 0x7F) << bitpos
-        bitpos += 7
-        if (val & 0x80) == 0:
-            return result
-    return None
-
-
-# pylint: disable=too-many-instance-attributes,not-callable
-class APIClient(threading.Thread):
-    def __init__(self, address, port, password):
-        threading.Thread.__init__(self)
-        self._address = address  # type: str
-        self._port = port  # type: int
-        self._password = password  # type: Optional[str]
-        self._socket = None  # type: Optional[socket.socket]
-        self._socket_open_event = threading.Event()
-        self._socket_write_lock = threading.Lock()
-        self._connected = False
-        self._authenticated = False
-        self._message_handlers = []
-        self._keepalive = 5
-        self._ping_timer = None
-        self._refresh_ping()
-
-        self.on_disconnect = None
-        self.on_connect = None
-        self.on_login = None
-        self.auto_reconnect = False
-        self._running_event = threading.Event()
-        self._stop_event = threading.Event()
-
-    @property
-    def stopped(self):
-        return self._stop_event.is_set()
-
-    def _refresh_ping(self):
-        if self._ping_timer is not None:
-            self._ping_timer.cancel()
-            self._ping_timer = None
-
-        def func():
-            self._ping_timer = None
-
-            if self._connected:
-                try:
-                    self.ping()
-                except APIConnectionError:
-                    self._fatal_error()
-                else:
-                    self._refresh_ping()
-
-        self._ping_timer = threading.Timer(self._keepalive, func)
-        self._ping_timer.start()
-
-    def _cancel_ping(self):
-        if self._ping_timer is not None:
-            self._ping_timer.cancel()
-            self._ping_timer = None
-
-    def _close_socket(self):
-        self._cancel_ping()
-        if self._socket is not None:
-            self._socket.close()
-            self._socket = None
-        self._socket_open_event.clear()
-        self._connected = False
-        self._authenticated = False
-        self._message_handlers = []
-
-    def stop(self, force=False):
-        if self.stopped:
-            raise ValueError
-
-        if self._connected and not force:
-            try:
-                self.disconnect()
-            except APIConnectionError:
-                pass
-        self._close_socket()
-
-        self._stop_event.set()
-        if not force:
-            self.join()
-
-    def connect(self):
-        if not self._running_event.wait(0.1):
-            raise APIConnectionError("You need to call start() first!")
-
-        if self._connected:
-            raise APIConnectionError("Already connected!")
-
-        try:
-            ip = resolve_ip_address(self._address)
-        except EsphomeError as err:
-            _LOGGER.warning("Error resolving IP address of %s. Is it connected to WiFi?",
-                            self._address)
-            _LOGGER.warning("(If this error persists, please set a static IP address: "
-                            "https://esphome.io/components/wifi.html#manual-ips)")
-            raise APIConnectionError(err)
-
-        _LOGGER.info("Connecting to %s:%s (%s)", self._address, self._port, ip)
-        self._socket = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
-        self._socket.settimeout(10.0)
-        self._socket.setsockopt(socket.IPPROTO_TCP, socket.TCP_NODELAY, 1)
-        try:
-            self._socket.connect((ip, self._port))
-        except socket.error as err:
-            self._fatal_error()
-            raise APIConnectionError("Error connecting to {}: {}".format(ip, err))
-        self._socket.settimeout(0.1)
-
-        self._socket_open_event.set()
-
-        hello = pb.HelloRequest()
-        hello.client_info = 'ESPHome v{}'.format(const.__version__)
-        try:
-            resp = self._send_message_await_response(hello, pb.HelloResponse)
-        except APIConnectionError as err:
-            self._fatal_error()
-            raise err
-        _LOGGER.debug("Successfully connected to %s ('%s' API=%s.%s)", self._address,
-                      resp.server_info, resp.api_version_major, resp.api_version_minor)
-        self._connected = True
-        if self.on_connect is not None:
-            self.on_connect()
-
-    def _check_connected(self):
-        if not self._connected:
-            self._fatal_error()
-            raise APIConnectionError("Must be connected!")
-
-    def login(self):
-        self._check_connected()
-        if self._authenticated:
-            raise APIConnectionError("Already logged in!")
-
-        connect = pb.ConnectRequest()
-        if self._password is not None:
-            connect.password = self._password
-        resp = self._send_message_await_response(connect, pb.ConnectResponse)
-        if resp.invalid_password:
-            raise APIConnectionError("Invalid password!")
-
-        self._authenticated = True
-        if self.on_login is not None:
-            self.on_login()
-
-    def _fatal_error(self):
-        was_connected = self._connected
-
-        self._close_socket()
-
-        if was_connected and self.on_disconnect is not None:
-            self.on_disconnect()
-
-    def _write(self, data):  # type: (bytes) -> None
-        if self._socket is None:
-            raise APIConnectionError("Socket closed")
-
-        _LOGGER.debug("Write: %s", format_bytes(data))
-        with self._socket_write_lock:
-            try:
-                self._socket.sendall(data)
-            except socket.error as err:
-                self._fatal_error()
-                raise APIConnectionError("Error while writing data: {}".format(err))
-
-    def _send_message(self, msg):
-        # type: (message.Message) -> None
-        for message_type, klass in MESSAGE_TYPE_TO_PROTO.items():
-            if isinstance(msg, klass):
-                break
-        else:
-            raise ValueError
-
-        encoded = msg.SerializeToString()
-        _LOGGER.debug("Sending %s:\n%s", type(msg), indent(text_type(msg)))
-        if IS_PY2:
-            req = chr(0x00)
-        else:
-            req = bytes([0])
-        req += _varuint_to_bytes(len(encoded))
-        req += _varuint_to_bytes(message_type)
-        req += encoded
-        self._write(req)
-        self._refresh_ping()
-
-    def _send_message_await_response_complex(self, send_msg, do_append, do_stop, timeout=1):
-        event = threading.Event()
-        responses = []
-
-        def on_message(resp):
-            if do_append(resp):
-                responses.append(resp)
-            if do_stop(resp):
-                event.set()
-
-        self._message_handlers.append(on_message)
-        self._send_message(send_msg)
-        ret = event.wait(timeout)
-        try:
-            self._message_handlers.remove(on_message)
-        except ValueError:
-            pass
-        if not ret:
-            raise APIConnectionError("Timeout while waiting for message response!")
-        return responses
-
-    def _send_message_await_response(self, send_msg, response_type, timeout=1):
-        def is_response(msg):
-            return isinstance(msg, response_type)
-
-        return self._send_message_await_response_complex(send_msg, is_response, is_response,
-                                                         timeout)[0]
-
-    def device_info(self):
-        self._check_connected()
-        return self._send_message_await_response(pb.DeviceInfoRequest(), pb.DeviceInfoResponse)
-
-    def ping(self):
-        self._check_connected()
-        return self._send_message_await_response(pb.PingRequest(), pb.PingResponse)
-
-    def disconnect(self):
-        self._check_connected()
-
-        try:
-            self._send_message_await_response(pb.DisconnectRequest(), pb.DisconnectResponse)
-        except APIConnectionError:
-            pass
-        self._close_socket()
-
-        if self.on_disconnect is not None:
-            self.on_disconnect()
-
-    def _check_authenticated(self):
-        if not self._authenticated:
-            raise APIConnectionError("Must login first!")
-
-    def subscribe_logs(self, on_log, log_level=None, dump_config=False):
-        self._check_authenticated()
-
-        def on_msg(msg):
-            if isinstance(msg, pb.SubscribeLogsResponse):
-                on_log(msg)
-
-        self._message_handlers.append(on_msg)
-        req = pb.SubscribeLogsRequest(dump_config=dump_config)
-        if log_level is not None:
-            req.level = log_level
-        self._send_message(req)
-
-    def _recv(self, amount):
-        ret = bytes()
-        if amount == 0:
-            return ret
-
-        while len(ret) < amount:
-            if self.stopped:
-                raise APIConnectionError("Stopped!")
-            if not self._socket_open_event.is_set():
-                raise APIConnectionError("No socket!")
-            try:
-                val = self._socket.recv(amount - len(ret))
-            except AttributeError:
-                raise APIConnectionError("Socket was closed")
-            except socket.timeout:
-                continue
-            except socket.error as err:
-                raise APIConnectionError("Error while receiving data: {}".format(err))
-            ret += val
-        return ret
-
-    def _recv_varint(self):
-        raw = bytes()
-        while not raw or char_to_byte(raw[-1]) & 0x80:
-            raw += self._recv(1)
-        return _bytes_to_varuint(raw)
-
-    def _run_once(self):
-        if not self._socket_open_event.wait(0.1):
-            return
-
-        # Preamble
-        if char_to_byte(self._recv(1)[0]) != 0x00:
-            raise APIConnectionError("Invalid preamble")
-
-        length = self._recv_varint()
-        msg_type = self._recv_varint()
-
-        raw_msg = self._recv(length)
-        if msg_type not in MESSAGE_TYPE_TO_PROTO:
-            _LOGGER.debug("Skipping message type %s", msg_type)
-            return
-
-        msg = MESSAGE_TYPE_TO_PROTO[msg_type]()
-        msg.ParseFromString(raw_msg)
-        _LOGGER.debug("Got message: %s:\n%s", type(msg), indent(str(msg)))
-        for msg_handler in self._message_handlers[:]:
-            msg_handler(msg)
-        self._handle_internal_messages(msg)
-        self._refresh_ping()
-
-    def run(self):
-        self._running_event.set()
-        while not self.stopped:
-            try:
-                self._run_once()
-            except APIConnectionError as err:
-                if self.stopped:
-                    break
-                if self._connected:
-                    _LOGGER.error("Error while reading incoming messages: %s", err)
-                    self._fatal_error()
-        self._running_event.clear()
-
-    def _handle_internal_messages(self, msg):
-        if isinstance(msg, pb.DisconnectRequest):
-            self._send_message(pb.DisconnectResponse())
-            if self._socket is not None:
-                self._socket.close()
-                self._socket = None
-            self._connected = False
-            if self.on_disconnect is not None:
-                self.on_disconnect()
-        elif isinstance(msg, pb.PingRequest):
-            self._send_message(pb.PingResponse())
-        elif isinstance(msg, pb.GetTimeRequest):
-            resp = pb.GetTimeResponse()
-            resp.epoch_seconds = int(time.time())
-            self._send_message(resp)
-
-
-def run_logs(config, address):
-    conf = config['api']
-    port = conf[CONF_PORT]
-    password = conf[CONF_PASSWORD]
-    _LOGGER.info("Starting log output from %s using esphome API", address)
-
-    cli = APIClient(address, port, password)
-    stopping = False
-    retry_timer = []
-
-    has_connects = []
-
-    def try_connect(tries=0, is_disconnect=True):
-        if stopping:
-            return
-
-        if is_disconnect:
-            _LOGGER.warning(u"Disconnected from API.")
-
-        while retry_timer:
-            retry_timer.pop(0).cancel()
-
-        error = None
-        try:
-            cli.connect()
-            cli.login()
-        except APIConnectionError as err:  # noqa
-            error = err
-
-        if error is None:
-            _LOGGER.info("Successfully connected to %s", address)
-            return
-
-        wait_time = min(2**tries, 300)
-        if not has_connects:
-            _LOGGER.warning(u"Initial connection failed. The ESP might not be connected "
-                            u"to WiFi yet (%s). Re-Trying in %s seconds",
-                            error, wait_time)
-        else:
-            _LOGGER.warning(u"Couldn't connect to API (%s). Trying to reconnect in %s seconds",
-                            error, wait_time)
-        timer = threading.Timer(wait_time, functools.partial(try_connect, tries + 1, is_disconnect))
-        timer.start()
-        retry_timer.append(timer)
-
-    def on_log(msg):
-        time_ = datetime.now().time().strftime(u'[%H:%M:%S]')
-        text = msg.message
-        if msg.send_failed:
-            text = color('white', '(Message skipped because it was too big to fit in '
-                                  'TCP buffer - This is only cosmetic)')
-        safe_print(time_ + text)
-
-    def on_login():
-        try:
-            cli.subscribe_logs(on_log, dump_config=not has_connects)
-            has_connects.append(True)
-        except APIConnectionError:
-            cli.disconnect()
-
-    cli.on_disconnect = try_connect
-    cli.on_login = on_login
-    cli.start()
-
-    try:
-        try_connect(is_disconnect=False)
-        while True:
-            time.sleep(1)
-    except KeyboardInterrupt:
-        stopping = True
-        cli.stop(True)
-        while retry_timer:
-            retry_timer.pop(0).cancel()
-    return 0

esphome/automation.py

@@ -1,391 +1,430 @@
-import copy
-
-import voluptuous as vol
-
+import esphome.codegen as cg
 import esphome.config_validation as cv
-from esphome.const import CONF_ABOVE, CONF_ACTION_ID, CONF_AND, CONF_AUTOMATION_ID, \
-    CONF_BELOW, CONF_CONDITION, CONF_CONDITION_ID, CONF_DELAY, CONF_ELSE, CONF_ID, CONF_IF, \
-    CONF_LAMBDA, CONF_OR, CONF_RANGE, CONF_THEN, CONF_TRIGGER_ID, CONF_WHILE, CONF_WAIT_UNTIL
-from esphome.core import CORE
-from esphome.cpp_generator import Pvariable, TemplateArguments, add, get_variable, \
-    process_lambda, templatable
-from esphome.cpp_types import Action, App, Component, PollingComponent, Trigger, bool_, \
-    esphome_ns, float_, uint32, void
-from esphome.util import ServiceRegistry
+from esphome.const import (
+    CONF_ALL,
+    CONF_ANY,
+    CONF_AUTOMATION_ID,
+    CONF_CONDITION,
+    CONF_COUNT,
+    CONF_ELSE,
+    CONF_ID,
+    CONF_THEN,
+    CONF_TIME,
+    CONF_TIMEOUT,
+    CONF_TRIGGER_ID,
+    CONF_TYPE_ID,
+    CONF_UPDATE_INTERVAL,
+)
+from esphome.schema_extractors import SCHEMA_EXTRACT, schema_extractor
+from esphome.util import Registry
 
 
 def maybe_simple_id(*validators):
-    validator = vol.All(*validators)
+    """Allow a raw ID to be specified in place of a config block.
+    If the value that's being validated is a dictionary, it's passed as-is to the specified validators. Otherwise, it's
+    wrapped in a dict that looks like ``{"id": <value>}``, and that dict is then handed off to the specified validators.
+    """
+    return maybe_conf(CONF_ID, *validators)
 
+
+def maybe_conf(conf, *validators):
+    """Allow a raw value to be specified in place of a config block.
+    If the value that's being validated is a dictionary, it's passed as-is to the specified validators. Otherwise, it's
+    wrapped in a dict that looks like ``{<conf>: <value>}``, and that dict is then handed off to the specified
+    validators.
+    (This is a general case of ``maybe_simple_id`` that allows the wrapping key to be something other than ``id``.)
+    """
+    validator = cv.All(*validators)
+
+    @schema_extractor("maybe")
     def validate(value):
+        if value == SCHEMA_EXTRACT:
+            return (validator, conf)
+
         if isinstance(value, dict):
             return validator(value)
-        return validator({CONF_ID: value})
+        with cv.remove_prepend_path([conf]):
+            return validator({conf: value})
 
     return validate
 
 
-def validate_recursive_condition(value):
-    is_list = isinstance(value, list)
-    value = cv.ensure_list()(value)[:]
-    for i, item in enumerate(value):
-        path = [i] if is_list else []
-        item = copy.deepcopy(item)
-        if not isinstance(item, dict):
-            raise vol.Invalid(u"Condition must consist of key-value mapping! Got {}".format(item),
-                              path)
-        key = next((x for x in item if x != CONF_CONDITION_ID), None)
-        if key is None:
-            raise vol.Invalid(u"Key missing from action! Got {}".format(item), path)
-        if key not in CONDITION_REGISTRY:
-            raise vol.Invalid(u"Unable to find condition with the name '{}', is the "
-                              u"component loaded?".format(key), path + [key])
-        item.setdefault(CONF_CONDITION_ID, None)
-        key2 = next((x for x in item if x not in (CONF_CONDITION_ID, key)), None)
-        if key2 is not None:
-            raise vol.Invalid(u"Cannot have two conditions in one item. Key '{}' overrides '{}'! "
-                              u"Did you forget to indent the block inside the condition?"
-                              u"".format(key, key2), path)
-        validator = CONDITION_REGISTRY[key][0]
-        try:
-            condition = validator(item[key])
-        except vol.Invalid as err:
-            err.prepend(path)
-            raise err
-        value[i] = {
-            CONF_CONDITION_ID: cv.declare_variable_id(Condition)(item[CONF_CONDITION_ID]),
-            key: condition,
-        }
-    return value
+def register_action(name, action_type, schema):
+    return ACTION_REGISTRY.register(name, action_type, schema)
 
 
-def validate_recursive_action(value):
-    is_list = isinstance(value, list)
-    if not is_list:
-        value = [value]
-    for i, item in enumerate(value):
-        path = [i] if is_list else []
-        item = copy.deepcopy(item)
-        if not isinstance(item, dict):
-            raise vol.Invalid(u"Action must consist of key-value mapping! Got {}".format(item),
-                              path)
-        key = next((x for x in item if x != CONF_ACTION_ID), None)
-        if key is None:
-            raise vol.Invalid(u"Key missing from action! Got {}".format(item), path)
-        if key not in ACTION_REGISTRY:
-            raise vol.Invalid(u"Unable to find action with the name '{}', is the component loaded?"
-                              u"".format(key), path + [key])
-        item.setdefault(CONF_ACTION_ID, None)
-        key2 = next((x for x in item if x not in (CONF_ACTION_ID, key)), None)
-        if key2 is not None:
-            raise vol.Invalid(u"Cannot have two actions in one item. Key '{}' overrides '{}'! "
-                              u"Did you forget to indent the block inside the action?"
-                              u"".format(key, key2), path)
-        validator = ACTION_REGISTRY[key][0]
-        try:
-            action = validator(item[key])
-        except vol.Invalid as err:
-            err.prepend(path)
-            raise err
-        value[i] = {
-            CONF_ACTION_ID: cv.declare_variable_id(Action)(item[CONF_ACTION_ID]),
-            key: action,
-        }
-    return value
+def register_condition(name, condition_type, schema):
+    return CONDITION_REGISTRY.register(name, condition_type, schema)
 
 
-ACTION_REGISTRY = ServiceRegistry()
-CONDITION_REGISTRY = ServiceRegistry()
+Action = cg.esphome_ns.class_("Action")
+Trigger = cg.esphome_ns.class_("Trigger")
+ACTION_REGISTRY = Registry()
+Condition = cg.esphome_ns.class_("Condition")
+CONDITION_REGISTRY = Registry()
+validate_action = cv.validate_registry_entry("action", ACTION_REGISTRY)
+validate_action_list = cv.validate_registry("action", ACTION_REGISTRY)
+validate_condition = cv.validate_registry_entry("condition", CONDITION_REGISTRY)
+validate_condition_list = cv.validate_registry("condition", CONDITION_REGISTRY)
 
-# pylint: disable=invalid-name
-DelayAction = esphome_ns.class_('DelayAction', Action, Component)
-LambdaAction = esphome_ns.class_('LambdaAction', Action)
-IfAction = esphome_ns.class_('IfAction', Action)
-WhileAction = esphome_ns.class_('WhileAction', Action)
-WaitUntilAction = esphome_ns.class_('WaitUntilAction', Action, Component)
-UpdateComponentAction = esphome_ns.class_('UpdateComponentAction', Action)
-Automation = esphome_ns.class_('Automation')
 
-Condition = esphome_ns.class_('Condition')
-AndCondition = esphome_ns.class_('AndCondition', Condition)
-OrCondition = esphome_ns.class_('OrCondition', Condition)
-RangeCondition = esphome_ns.class_('RangeCondition', Condition)
-LambdaCondition = esphome_ns.class_('LambdaCondition', Condition)
+def validate_potentially_and_condition(value):
+    if isinstance(value, list):
+        with cv.remove_prepend_path(["and"]):
+            return validate_condition({"and": value})
+    return validate_condition(value)
+
+
+def validate_potentially_or_condition(value):
+    if isinstance(value, list):
+        with cv.remove_prepend_path(["or"]):
+            return validate_condition({"or": value})
+    return validate_condition(value)
+
+
+DelayAction = cg.esphome_ns.class_("DelayAction", Action, cg.Component)
+LambdaAction = cg.esphome_ns.class_("LambdaAction", Action)
+IfAction = cg.esphome_ns.class_("IfAction", Action)
+WhileAction = cg.esphome_ns.class_("WhileAction", Action)
+RepeatAction = cg.esphome_ns.class_("RepeatAction", Action)
+WaitUntilAction = cg.esphome_ns.class_("WaitUntilAction", Action, cg.Component)
+UpdateComponentAction = cg.esphome_ns.class_("UpdateComponentAction", Action)
+SuspendComponentAction = cg.esphome_ns.class_("SuspendComponentAction", Action)
+ResumeComponentAction = cg.esphome_ns.class_("ResumeComponentAction", Action)
+Automation = cg.esphome_ns.class_("Automation")
+
+LambdaCondition = cg.esphome_ns.class_("LambdaCondition", Condition)
+ForCondition = cg.esphome_ns.class_("ForCondition", Condition, cg.Component)
 
 
 def validate_automation(extra_schema=None, extra_validators=None, single=False):
     if extra_schema is None:
         extra_schema = {}
-    if isinstance(extra_schema, vol.Schema):
+    if isinstance(extra_schema, cv.Schema):
         extra_schema = extra_schema.schema
     schema = AUTOMATION_SCHEMA.extend(extra_schema)
 
     def validator_(value):
         if isinstance(value, list):
+            # List of items, there are two possible options here, either a sequence of
+            # actions (no then:) or a list of automations.
             try:
                 # First try as a sequence of actions
-                return [schema({CONF_THEN: value})]
-            except vol.Invalid as err:
-                if err.path and err.path[0] == CONF_THEN:
-                    err.path.pop(0)
-
+                # If that succeeds, return immediately
+                with cv.remove_prepend_path([CONF_THEN]):
+                    return [schema({CONF_THEN: value})]
+            except cv.Invalid as err:
                 # Next try as a sequence of automations
                 try:
-                    return vol.Schema([schema])(value)
-                except vol.Invalid as err2:
-                    if 'Unable to find action' in str(err):
+                    return cv.Schema([schema])(value)
+                except cv.Invalid as err2:
+                    if "extra keys not allowed" in str(err2) and len(err2.path) == 2:
+                        # pylint: disable=raise-missing-from
+                        raise err
+                    if "Unable to find action" in str(err):
                         raise err2
-                    raise vol.MultipleInvalid([err, err2])
+                    raise cv.MultipleInvalid([err, err2])
         elif isinstance(value, dict):
             if CONF_THEN in value:
                 return [schema(value)]
-            return [schema({CONF_THEN: value})]
+            with cv.remove_prepend_path([CONF_THEN]):
+                return [schema({CONF_THEN: value})]
         # This should only happen with invalid configs, but let's have a nice error message.
         return [schema(value)]
 
+    @schema_extractor("automation")
     def validator(value):
+        if value == SCHEMA_EXTRACT:
+            return schema
+
         value = validator_(value)
         if extra_validators is not None:
-            value = vol.Schema([extra_validators])(value)
+            value = cv.Schema([extra_validators])(value)
         if single:
             if len(value) != 1:
-                raise vol.Invalid("Cannot have more than 1 automation for templates")
+                raise cv.Invalid("Cannot have more than 1 automation for templates")
             return value[0]
         return value
 
     return validator
 
 
-AUTOMATION_SCHEMA = vol.Schema({
-    cv.GenerateID(CONF_TRIGGER_ID): cv.declare_variable_id(Trigger),
-    cv.GenerateID(CONF_AUTOMATION_ID): cv.declare_variable_id(Automation),
-    vol.Optional(CONF_IF): validate_recursive_condition,
-    vol.Required(CONF_THEN): validate_recursive_action,
-})
+AUTOMATION_SCHEMA = cv.Schema(
+    {
+        cv.GenerateID(CONF_TRIGGER_ID): cv.declare_id(Trigger),
+        cv.GenerateID(CONF_AUTOMATION_ID): cv.declare_id(Automation),
+        cv.Required(CONF_THEN): validate_action_list,
+    }
+)
 
-AND_CONDITION_SCHEMA = validate_recursive_condition
+AndCondition = cg.esphome_ns.class_("AndCondition", Condition)
+OrCondition = cg.esphome_ns.class_("OrCondition", Condition)
+NotCondition = cg.esphome_ns.class_("NotCondition", Condition)
+XorCondition = cg.esphome_ns.class_("XorCondition", Condition)
 
 
-@CONDITION_REGISTRY.register(CONF_AND, AND_CONDITION_SCHEMA)
-def and_condition_to_code(config, condition_id, arg_type, template_arg):
-    for conditions in build_conditions(config, arg_type):
-        yield
-    rhs = AndCondition.new(template_arg, conditions)
-    type = AndCondition.template(template_arg)
-    yield Pvariable(condition_id, rhs, type=type)
+@register_condition("and", AndCondition, validate_condition_list)
+async def and_condition_to_code(config, condition_id, template_arg, args):
+    conditions = await build_condition_list(config, template_arg, args)
+    return cg.new_Pvariable(condition_id, template_arg, conditions)
 
 
-OR_CONDITION_SCHEMA = validate_recursive_condition
+@register_condition("or", OrCondition, validate_condition_list)
+async def or_condition_to_code(config, condition_id, template_arg, args):
+    conditions = await build_condition_list(config, template_arg, args)
+    return cg.new_Pvariable(condition_id, template_arg, conditions)
 
 
-@CONDITION_REGISTRY.register(CONF_OR, OR_CONDITION_SCHEMA)
-def or_condition_to_code(config, condition_id, arg_type, template_arg):
-    for conditions in build_conditions(config, arg_type):
-        yield
-    rhs = OrCondition.new(template_arg, conditions)
-    type = OrCondition.template(template_arg)
-    yield Pvariable(condition_id, rhs, type=type)
+@register_condition("all", AndCondition, validate_condition_list)
+async def all_condition_to_code(config, condition_id, template_arg, args):
+    conditions = await build_condition_list(config, template_arg, args)
+    return cg.new_Pvariable(condition_id, template_arg, conditions)
 
 
-RANGE_CONDITION_SCHEMA = vol.All(vol.Schema({
-    vol.Optional(CONF_ABOVE): cv.templatable(cv.float_),
-    vol.Optional(CONF_BELOW): cv.templatable(cv.float_),
-}), cv.has_at_least_one_key(CONF_ABOVE, CONF_BELOW))
+@register_condition("any", OrCondition, validate_condition_list)
+async def any_condition_to_code(config, condition_id, template_arg, args):
+    conditions = await build_condition_list(config, template_arg, args)
+    return cg.new_Pvariable(condition_id, template_arg, conditions)
 
 
-@CONDITION_REGISTRY.register(CONF_RANGE, RANGE_CONDITION_SCHEMA)
-def range_condition_to_code(config, condition_id, arg_type, template_arg):
-    for conditions in build_conditions(config, arg_type):
-        yield
-    rhs = RangeCondition.new(template_arg, conditions)
-    type = RangeCondition.template(template_arg)
-    condition = Pvariable(condition_id, rhs, type=type)
-    if CONF_ABOVE in config:
-        for template_ in templatable(config[CONF_ABOVE], arg_type, float_):
-            yield
-        condition.set_min(template_)
-    if CONF_BELOW in config:
-        for template_ in templatable(config[CONF_BELOW], arg_type, float_):
-            yield
-        condition.set_max(template_)
-    yield condition
+@register_condition("not", NotCondition, validate_potentially_and_condition)
+async def not_condition_to_code(config, condition_id, template_arg, args):
+    condition = await build_condition(config, template_arg, args)
+    return cg.new_Pvariable(condition_id, template_arg, condition)
 
 
-DELAY_ACTION_SCHEMA = cv.templatable(cv.positive_time_period_milliseconds)
+@register_condition("xor", XorCondition, validate_condition_list)
+async def xor_condition_to_code(config, condition_id, template_arg, args):
+    conditions = await build_condition_list(config, template_arg, args)
+    return cg.new_Pvariable(condition_id, template_arg, conditions)
 
 
-@ACTION_REGISTRY.register(CONF_DELAY, DELAY_ACTION_SCHEMA)
-def delay_action_to_code(config, action_id, arg_type, template_arg):
-    rhs = App.register_component(DelayAction.new(template_arg))
-    type = DelayAction.template(template_arg)
-    action = Pvariable(action_id, rhs, type=type)
-    for template_ in templatable(config, arg_type, uint32):
-        yield
-    add(action.set_delay(template_))
-    yield action
+@register_condition("lambda", LambdaCondition, cv.returning_lambda)
+async def lambda_condition_to_code(config, condition_id, template_arg, args):
+    lambda_ = await cg.process_lambda(config, args, return_type=bool)
+    return cg.new_Pvariable(condition_id, template_arg, lambda_)
 
 
-IF_ACTION_SCHEMA = vol.All({
-    vol.Required(CONF_CONDITION): validate_recursive_condition,
-    vol.Optional(CONF_THEN): validate_recursive_action,
-    vol.Optional(CONF_ELSE): validate_recursive_action,
-}, cv.has_at_least_one_key(CONF_THEN, CONF_ELSE))
+@register_condition(
+    "for",
+    ForCondition,
+    cv.Schema(
+        {
+            cv.Required(CONF_TIME): cv.templatable(
+                cv.positive_time_period_milliseconds
+            ),
+            cv.Required(CONF_CONDITION): validate_potentially_and_condition,
+        }
+    ).extend(cv.COMPONENT_SCHEMA),
+)
+async def for_condition_to_code(config, condition_id, template_arg, args):
+    condition = await build_condition(
+        config[CONF_CONDITION], cg.TemplateArguments(), []
+    )
+    var = cg.new_Pvariable(condition_id, template_arg, condition)
+    await cg.register_component(var, config)
+    templ = await cg.templatable(config[CONF_TIME], args, cg.uint32)
+    cg.add(var.set_time(templ))
+    return var
 
 
-@ACTION_REGISTRY.register(CONF_IF, IF_ACTION_SCHEMA)
-def if_action_to_code(config, action_id, arg_type, template_arg):
-    for conditions in build_conditions(config[CONF_CONDITION], arg_type):
-        yield None
-    rhs = IfAction.new(template_arg, conditions)
-    type = IfAction.template(template_arg)
-    action = Pvariable(action_id, rhs, type=type)
+@register_action(
+    "delay", DelayAction, cv.templatable(cv.positive_time_period_milliseconds)
+)
+async def delay_action_to_code(config, action_id, template_arg, args):
+    var = cg.new_Pvariable(action_id, template_arg)
+    await cg.register_component(var, {})
+    template_ = await cg.templatable(config, args, cg.uint32)
+    cg.add(var.set_delay(template_))
+    return var
+
+
+@register_action(
+    "if",
+    IfAction,
+    cv.All(
+        {
+            cv.Exclusive(
+                CONF_CONDITION, CONF_CONDITION
+            ): validate_potentially_and_condition,
+            cv.Exclusive(CONF_ANY, CONF_CONDITION): validate_potentially_or_condition,
+            cv.Exclusive(CONF_ALL, CONF_CONDITION): validate_potentially_and_condition,
+            cv.Optional(CONF_THEN): validate_action_list,
+            cv.Optional(CONF_ELSE): validate_action_list,
+        },
+        cv.has_at_least_one_key(CONF_THEN, CONF_ELSE),
+        cv.has_at_least_one_key(CONF_CONDITION, CONF_ANY, CONF_ALL),
+    ),
+)
+async def if_action_to_code(config, action_id, template_arg, args):
+    cond_conf = next(el for el in config if el in (CONF_ANY, CONF_ALL, CONF_CONDITION))
+    conditions = await build_condition(config[cond_conf], template_arg, args)
+    var = cg.new_Pvariable(action_id, template_arg, conditions)
     if CONF_THEN in config:
-        for actions in build_actions(config[CONF_THEN], arg_type):
-            yield None
-        add(action.add_then(actions))
+        actions = await build_action_list(config[CONF_THEN], template_arg, args)
+        cg.add(var.add_then(actions))
     if CONF_ELSE in config:
-        for actions in build_actions(config[CONF_ELSE], arg_type):
-            yield None
-        add(action.add_else(actions))
-    yield action
+        actions = await build_action_list(config[CONF_ELSE], template_arg, args)
+        cg.add(var.add_else(actions))
+    return var
 
 
-WHILE_ACTION_SCHEMA = vol.Schema({
-    vol.Required(CONF_CONDITION): validate_recursive_condition,
-    vol.Required(CONF_THEN): validate_recursive_action,
-})
+@register_action(
+    "while",
+    WhileAction,
+    cv.Schema(
+        {
+            cv.Required(CONF_CONDITION): validate_potentially_and_condition,
+            cv.Required(CONF_THEN): validate_action_list,
+        }
+    ),
+)
+async def while_action_to_code(config, action_id, template_arg, args):
+    conditions = await build_condition(config[CONF_CONDITION], template_arg, args)
+    var = cg.new_Pvariable(action_id, template_arg, conditions)
+    actions = await build_action_list(config[CONF_THEN], template_arg, args)
+    cg.add(var.add_then(actions))
+    return var
 
 
-@ACTION_REGISTRY.register(CONF_WHILE, WHILE_ACTION_SCHEMA)
-def while_action_to_code(config, action_id, arg_type, template_arg):
-    for conditions in build_conditions(config[CONF_CONDITION], arg_type):
-        yield None
-    rhs = WhileAction.new(template_arg, conditions)
-    type = WhileAction.template(template_arg)
-    action = Pvariable(action_id, rhs, type=type)
-    for actions in build_actions(config[CONF_THEN], arg_type):
-        yield None
-    add(action.add_then(actions))
-    yield action
+@register_action(
+    "repeat",
+    RepeatAction,
+    cv.Schema(
+        {
+            cv.Required(CONF_COUNT): cv.templatable(cv.positive_not_null_int),
+            cv.Required(CONF_THEN): validate_action_list,
+        }
+    ),
+)
+async def repeat_action_to_code(config, action_id, template_arg, args):
+    var = cg.new_Pvariable(action_id, template_arg)
+    count_template = await cg.templatable(config[CONF_COUNT], args, cg.uint32)
+    cg.add(var.set_count(count_template))
+    actions = await build_action_list(
+        config[CONF_THEN],
+        cg.TemplateArguments(cg.uint32, *template_arg.args),
+        [(cg.uint32, "iteration"), *args],
+    )
+    cg.add(var.add_then(actions))
+    return var
 
 
-def validate_wait_until(value):
-    schema = vol.Schema({
-        vol.Required(CONF_CONDITION): validate_recursive_condition
-    })
-    if isinstance(value, dict) and CONF_CONDITION in value:
-        return schema(value)
-    return validate_wait_until({CONF_CONDITION: value})
+_validate_wait_until = cv.maybe_simple_value(
+    {
+        cv.Required(CONF_CONDITION): validate_potentially_and_condition,
+        cv.Optional(CONF_TIMEOUT): cv.templatable(cv.positive_time_period_milliseconds),
+    },
+    key=CONF_CONDITION,
+)
 
 
-WAIT_UNTIL_ACTION_SCHEMA = validate_wait_until
+@register_action("wait_until", WaitUntilAction, _validate_wait_until)
+async def wait_until_action_to_code(config, action_id, template_arg, args):
+    conditions = await build_condition(config[CONF_CONDITION], template_arg, args)
+    var = cg.new_Pvariable(action_id, template_arg, conditions)
+    if CONF_TIMEOUT in config:
+        template_ = await cg.templatable(config[CONF_TIMEOUT], args, cg.uint32)
+        cg.add(var.set_timeout_value(template_))
+    await cg.register_component(var, {})
+    return var
 
 
-@ACTION_REGISTRY.register(CONF_WAIT_UNTIL, WAIT_UNTIL_ACTION_SCHEMA)
-def wait_until_action_to_code(config, action_id, arg_type, template_arg):
-    for conditions in build_conditions(config[CONF_CONDITION], arg_type):
-        yield None
-    rhs = WaitUntilAction.new(template_arg, conditions)
-    type = WaitUntilAction.template(template_arg)
-    action = Pvariable(action_id, rhs, type=type)
-    add(App.register_component(action))
-    yield action
+@register_action("lambda", LambdaAction, cv.lambda_)
+async def lambda_action_to_code(config, action_id, template_arg, args):
+    lambda_ = await cg.process_lambda(config, args, return_type=cg.void)
+    return cg.new_Pvariable(action_id, template_arg, lambda_)
 
 
-LAMBDA_ACTION_SCHEMA = cv.lambda_
+@register_action(
+    "component.update",
+    UpdateComponentAction,
+    maybe_simple_id(
+        {
+            cv.Required(CONF_ID): cv.use_id(cg.PollingComponent),
+        }
+    ),
+)
+async def component_update_action_to_code(config, action_id, template_arg, args):
+    comp = await cg.get_variable(config[CONF_ID])
+    return cg.new_Pvariable(action_id, template_arg, comp)
 
 
-@ACTION_REGISTRY.register(CONF_LAMBDA, LAMBDA_ACTION_SCHEMA)
-def lambda_action_to_code(config, action_id, arg_type, template_arg):
-    for lambda_ in process_lambda(config, [(arg_type, 'x')], return_type=void):
-        yield None
-    rhs = LambdaAction.new(template_arg, lambda_)
-    type = LambdaAction.template(template_arg)
-    yield Pvariable(action_id, rhs, type=type)
+@register_action(
+    "component.suspend",
+    SuspendComponentAction,
+    maybe_simple_id(
+        {
+            cv.Required(CONF_ID): cv.use_id(cg.PollingComponent),
+        }
+    ),
+)
+async def component_suspend_action_to_code(config, action_id, template_arg, args):
+    comp = await cg.get_variable(config[CONF_ID])
+    return cg.new_Pvariable(action_id, template_arg, comp)
 
 
-LAMBDA_CONDITION_SCHEMA = cv.lambda_
+@register_action(
+    "component.resume",
+    ResumeComponentAction,
+    maybe_simple_id(
+        {
+            cv.Required(CONF_ID): cv.use_id(cg.PollingComponent),
+            cv.Optional(CONF_UPDATE_INTERVAL): cv.templatable(
+                cv.positive_time_period_milliseconds
+            ),
+        }
+    ),
+)
+async def component_resume_action_to_code(config, action_id, template_arg, args):
+    comp = await cg.get_variable(config[CONF_ID])
+    var = cg.new_Pvariable(action_id, template_arg, comp)
+    if CONF_UPDATE_INTERVAL in config:
+        template_ = await cg.templatable(config[CONF_UPDATE_INTERVAL], args, int)
+        cg.add(var.set_update_interval(template_))
+    return var
 
 
-@CONDITION_REGISTRY.register(CONF_LAMBDA, LAMBDA_CONDITION_SCHEMA)
-def lambda_condition_to_code(config, condition_id, arg_type, template_arg):
-    for lambda_ in process_lambda(config, [(arg_type, 'x')], return_type=bool_):
-        yield
-    rhs = LambdaCondition.new(template_arg, lambda_)
-    type = LambdaCondition.template(template_arg)
-    yield Pvariable(condition_id, rhs, type=type)
+async def build_action(full_config, template_arg, args):
+    registry_entry, config = cg.extract_registry_entry_config(
+        ACTION_REGISTRY, full_config
+    )
+    action_id = full_config[CONF_TYPE_ID]
+    builder = registry_entry.coroutine_fun
+    ret = await builder(config, action_id, template_arg, args)
+    return ret
 
 
-CONF_COMPONENT_UPDATE = 'component.update'
-COMPONENT_UPDATE_ACTION_SCHEMA = maybe_simple_id({
-    vol.Required(CONF_ID): cv.use_variable_id(PollingComponent),
-})
-
-
-@ACTION_REGISTRY.register(CONF_COMPONENT_UPDATE, COMPONENT_UPDATE_ACTION_SCHEMA)
-def component_update_action_to_code(config, action_id, arg_type, template_arg):
-    for var in get_variable(config[CONF_ID]):
-        yield None
-    rhs = UpdateComponentAction.new(template_arg, var)
-    type = UpdateComponentAction.template(template_arg)
-    yield Pvariable(action_id, rhs, type=type)
-
-
-def build_action(full_config, arg_type):
-    action_id = full_config[CONF_ACTION_ID]
-    key, config = next((k, v) for k, v in full_config.items() if k in ACTION_REGISTRY)
-
-    builder = ACTION_REGISTRY[key][1]
-    template_arg = TemplateArguments(arg_type)
-    for result in builder(config, action_id, arg_type, template_arg):
-        yield None
-    yield result
-
-
-def build_actions(config, arg_type):
+async def build_action_list(config, templ, arg_type):
     actions = []
     for conf in config:
-        for action in build_action(conf, arg_type):
-            yield None
+        action = await build_action(conf, templ, arg_type)
         actions.append(action)
-    yield actions
+    return actions
 
 
-def build_condition(full_config, arg_type):
-    action_id = full_config[CONF_CONDITION_ID]
-    key, config = next((k, v) for k, v in full_config.items() if k in CONDITION_REGISTRY)
-
-    builder = CONDITION_REGISTRY[key][1]
-    template_arg = TemplateArguments(arg_type)
-    for result in builder(config, action_id, arg_type, template_arg):
-        yield None
-    yield result
+async def build_condition(full_config, template_arg, args):
+    registry_entry, config = cg.extract_registry_entry_config(
+        CONDITION_REGISTRY, full_config
+    )
+    action_id = full_config[CONF_TYPE_ID]
+    builder = registry_entry.coroutine_fun
+    ret = await builder(config, action_id, template_arg, args)
+    return ret
 
 
-def build_conditions(config, arg_type):
+async def build_condition_list(config, templ, args):
     conditions = []
     for conf in config:
-        for condition in build_condition(conf, arg_type):
-            yield None
+        condition = await build_condition(conf, templ, args)
         conditions.append(condition)
-    yield conditions
+    return conditions
 
 
-def build_automation_(trigger, arg_type, config):
-    rhs = App.make_automation(TemplateArguments(arg_type), trigger)
-    type = Automation.template(arg_type)
-    obj = Pvariable(config[CONF_AUTOMATION_ID], rhs, type=type)
-    if CONF_IF in config:
-        conditions = None
-        for conditions in build_conditions(config[CONF_IF], arg_type):
-            yield None
-        add(obj.add_conditions(conditions))
-    actions = None
-    for actions in build_actions(config[CONF_THEN], arg_type):
-        yield None
-    add(obj.add_actions(actions))
-    yield obj
-
-
-def build_automation(trigger, arg_type, config):
-    CORE.add_job(build_automation_, trigger, arg_type, config)
+async def build_automation(trigger, args, config):
+    arg_types = [arg[0] for arg in args]
+    templ = cg.TemplateArguments(*arg_types)
+    obj = cg.new_Pvariable(config[CONF_AUTOMATION_ID], templ, trigger)
+    actions = await build_action_list(config[CONF_THEN], templ, args)
+    cg.add(obj.add_actions(actions))
+    return obj

esphome/codegen.py

@@ -0,0 +1,93 @@
+# Base file for all codegen-related imports
+# All integrations should have a line in the import section like this
+#
+# >>> import esphome.codegen as cg
+#
+# Integrations should specifically *NOT* import directly from the
+# other helper modules (cpp_generator etc) directly if they don't
+# want to break suddenly due to a rename (this file will get backports for features).
+
+# pylint: disable=unused-import
+from esphome.cpp_generator import (  # noqa: F401
+    ArrayInitializer,
+    Expression,
+    LineComment,
+    MockObj,
+    MockObjClass,
+    Pvariable,
+    RawExpression,
+    RawStatement,
+    Statement,
+    StructInitializer,
+    TemplateArguments,
+    add,
+    add_build_flag,
+    add_define,
+    add_global,
+    add_library,
+    add_platformio_option,
+    get_variable,
+    get_variable_with_full_id,
+    is_template,
+    new_Pvariable,
+    new_variable,
+    process_lambda,
+    progmem_array,
+    safe_exp,
+    statement,
+    static_const_array,
+    templatable,
+    variable,
+    with_local_variable,
+)
+from esphome.cpp_helpers import (  # noqa: F401
+    build_registry_entry,
+    build_registry_list,
+    extract_registry_entry_config,
+    gpio_pin_expression,
+    past_safe_mode,
+    register_component,
+    register_parented,
+)
+from esphome.cpp_types import (  # noqa: F401
+    NAN,
+    App,
+    Application,
+    Component,
+    ComponentPtr,
+    Controller,
+    EntityBase,
+    EntityCategory,
+    ESPTime,
+    GPIOPin,
+    InternalGPIOPin,
+    JsonObject,
+    JsonObjectConst,
+    Parented,
+    PollingComponent,
+    arduino_json_ns,
+    bool_,
+    const_char_ptr,
+    double,
+    esphome_ns,
+    float_,
+    global_ns,
+    gpio_Flags,
+    int16,
+    int32,
+    int64,
+    int_,
+    nullptr,
+    optional,
+    size_t,
+    std_ns,
+    std_shared_ptr,
+    std_string,
+    std_string_ref,
+    std_vector,
+    uint8,
+    uint16,
+    uint32,
+    uint64,
+    void,
+)

esphome/components/a01nyub/__init__.py

@@ -0,0 +1 @@
+CODEOWNERS = ["@MrSuicideParrot"]