The following PRs add support for a custom `_info` directory containing
metadata such an image URL, display name, logo, etc in
`etcher-image-stream`:
- https://github.com/resin-io-modules/etcher-image-stream/pull/16
- https://github.com/resin-io-modules/etcher-image-stream/pull/14
- https://github.com/resin-io-modules/etcher-image-stream/pull/13
Now that this module supports such metadata, we make use of it in the
GUI as follows:
- The file name is replaced with the display name.
- The file name links to the image URL.
- The "Select Image" logo is replaced with the image logo.
Some miscellaneous changes introduces in this PR to support the changes
described above:
- Implement `SelectionStateModel.getImageUrl()`.
- Implement `SelectionStateModel.getImageLogo()`.
- Implement `SelectionStateModel.getImageName()`.
- Ignore the "logo" image property when displaying the "Select image"
event, in order to not fill the console with SVG contents.
- Make `svg-icon` understand SVG strings as paths.
- Make `svg-icon` react to changes to the `path` attribute.
- Extract the core functionality of `openExternal` into
`OSOpenExternalService`.
- Upgrade `etcher-image-stream` to v3.0.1.
Change-Type: minor
Changelog-Entry: Support rich image extensions.
Fixes: https://github.com/resin-io/etcher/issues/470
Signed-off-by: Juan Cruz Viotti <jviottidc@gmail.com>
The current error message is a bit blurry. The new one is much more user
friendly and directly guides the user towards a possible "next action".
Signed-off-by: Juan Cruz Viotti <jviottidc@gmail.com>
We try our best to check that the images the user select are too big for
the selected drive as early as possible, but this probes to be
problematic with certain compressed formats, like bzip2, which doesn't
store any information about the uncompressed size, requiring a ~50s
intensive computation as a minimum to find it out.
For these kinds of formats, we don't perform an early check, but instead
gracefully handle the case where the drive doesn't have any more space.
This PR handles an `ENOSPC` error by displaying the alert orange ribbon,
and prompting the user to retry with a larger drive. This is a huge
improvement over the cryptic `EIO` error what was thrown before, and
over having Etcher freeze at a certain percentage point.
Change-Type: minor
Changelog-Entry: Display a nice alert ribbon if drive runs out of space.
See: https://github.com/resin-io/etcher/issues/571
Signed-off-by: Juan Cruz Viotti <jviottidc@gmail.com>
* upgrade: etcher-image-stream to v2.3.0
This version contains support for `hddimg` files.
Changelog-Entry: Add support for `hddimg` images.
Change-Type: minor
Fixes: https://github.com/resin-io/etcher/issues/549
Link: https://github.com/resin-io-modules/etcher-image-stream/blob/master/CHANGELOG.md#v230---2016-07-01
Signed-off-by: Juan Cruz Viotti <jviottidc@gmail.com>
* minifix(GUI): add a "many more" tooltip in the first step
The amount of image types we support is growing exponentially. Adding
the uncompressed extensions and the compressed ones in a tooltip gave us
room the breathe in the past, but its not enough anymore.
The current approach allows us to scale forever: we list the first three
extensions, and add a "many more" tooltip that shows all the rest.
Change-Type: patch
Signed-off-by: Juan Cruz Viotti <jviottidc@gmail.com>
In certain timezones, like India's, the ETA would display very weird
numbers. The problem was that we passed a number of milliseconds to
MomentJS, which created a Date object based on it taking timezones into
consideration.
As a solution, we convert the seconds to a Date object containing the
lowest possible date values, and set its seconds to the ETA, since this
effectively represents just the number of seconds we're interested in.
Changelog-Entry: Fix incorrect ETA numbers in certain timezones.
Change-Type: patch
Signed-off-by: Juan Cruz Viotti <jviottidc@gmail.com>
The `SupportedFormatsModel` went through some changes recently, notably,
the distinction between compressed and archived formats.
This change introduced a subtle issue since we listed compressed and non
compressed supported formats on the main screen, but forgot about
archives.
Changelog-Entry: Display `*.zip` in the supported images tooltip.
Change-Type: patch
Signed-off-by: Juan Cruz Viotti <jviottidc@gmail.com>
* refactor: getter/setter interface for SettingsModel
This PR introduces a getter/setter interface for `SettingsModel`, which
replaces the old way of managing setting values by simply assigning
properties to an object.
This is the first step towards moving the settings functionality to the
Redux store.
Signed-off-by: Juan Cruz Viotti <jviottidc@gmail.com>
* refactor: store settings in redux store
The state data structure now contains a property called `settings`,
which is a map containing all setting values.
The list of supported settings can be calculated by retrieving the keys
from the `settings` object, which means that if we support a setting, we
must include a default.
Signed-off-by: Juan Cruz Viotti <jviottidc@gmail.com>
* feat: store settings in localStorage
This functionality was deleted by acb0de2 when moving the settings
object to the redux store, promising that the feature will be added back
in a future commit.
Signed-off-by: Juan Cruz Viotti <jviottidc@gmail.com>
This is a rather big PR that moves the flash results information to the
Redux store, which simplifies and improves a lot of things as throughly
described in the commits that introduced Redux.
Here's a summary of the changes:
- Add a `flashResults` property to the store.
- Validate the contents of `flashResults`, handling certain edge cases
that make the modal incoherent.
- Split `ImageWriterService.setFlashing()` to
`ImageWriterService.setFlashingFlag()` and
`ImageWriterService.unsetFlashingFlag()`.
- Require the flash results to be passed to
`ImageWriterService.unsetFlashingFlag()`.
- Stop resolving the flash results from `ImageWriterService.flash()`.
- Implement `ImageWriterService.getFlashResults()`.
- Make the `RESET_FLASH_STATE` action reset the flash results.
- Access the source checksum from the store in the "finish" page,
instead of requiring the controller to pass it as a state parameter.
- Implement `.wasLastFlashSuccessful()` function in the main controller
to replace the `.success` property.
- Completely remove the `.success` property in the main controller.
Signed-off-by: Juan Cruz Viotti <jviottidc@gmail.com>
So the property is consistent from what we get from `etcher-image-write`
and we don't have to unnecessarily rename ourselves to pass it to the
model.
Signed-off-by: Juan Cruz Viotti <jviottidc@gmail.com>
This PR introduces two changes to mitigate this problem and overall
provide a better UX:
- Show ellipses in the middle of the image name in the first step if
needed.
- Add a tooltip below the image selection label in the first step to
show a little modal displaying the full path to the image.
Fixes: https://github.com/resin-io/etcher/issues/418
Signed-off-by: Juan Cruz Viotti <jviottidc@gmail.com>
Currently, `DriveScannerService` is in charge of both scanning the
available drives and maintaining the state of the currently detected
drives.
To honour the single responsibility principle, we split this service
into a `DrivesModel`, which is incharge of maintaining the state without
caring how they are detected, and `DriveScannerService`, which only
scans the available drives and modified `DrivesModel` accordingly.
Signed-off-by: Juan Cruz Viotti <jviottidc@gmail.com>
* Show speed during check
Signed-off-by: Juan Cruz Viotti <jviottidc@gmail.com>
* Display ETA during flash and check
Fixes: https://github.com/resin-io/etcher/issues/256
Signed-off-by: Juan Cruz Viotti <jviottidc@gmail.com>
* Make .selectImage() dialog return an object with a `path` property
This allows to return more than one value for the selected image,
like image size and other metadata for example.
Signed-off-by: Juan Cruz Viotti <jviottidc@gmail.com>
* Return image size from .selectImage() dialog
This property will be useful to perform some sanity checks, like
ensuring the selected drive is large enough to contain the image.
Signed-off-by: Juan Cruz Viotti <jviottidc@gmail.com>
* Store both the image path and the image size in the selection model
In order to simplify accessing such properties in an encapsulated
manner, `SelectionStateModel.getImage()` was replaced with the following
functions:
- `SelectionStateModel.getImagePath()`.
- `SelectionStateModel.getImageSize()`.
Signed-off-by: Juan Cruz Viotti <jviottidc@gmail.com>
* Increase SelectionStateModel setter validation
The model not providing any kind of validation was the source of some
bugs I encountered while implementing the previous commits that would
not have happened otherwise.
Signed-off-by: Juan Cruz Viotti <jviottidc@gmail.com>
* Prevent selection of drives that are not large enough
- The drive selector modal was modified such that drives that are not
large enough are crossed out, and the user is not able to click them.
- In the case of drive auto-selection, not large enough drives won't
attempt to get autoselected.
This commit introduces:
- The `SelectionStateModel.isDriveLargeEnough()` function.
Fixes: https://github.com/resin-io/etcher/issues/344
Signed-off-by: Juan Cruz Viotti <jviottidc@gmail.com>
This PR introduces `etcher-image-stream`:
https://github.com/resin-io-modules/etcher-image-stream
a module that will handle support for decompression, URL streaming, and
any other way to get a source of data to write in Etcher.
Most of the changes in this PR are because XZ decompression includes a
native dependency (no pure JS implementations out there for now), so we
had to tweak various things for the dependency to work correctly on
Etcher/Electron.
See: https://github.com/resin-io/etcher/issues/325
Signed-off-by: Juan Cruz Viotti <jviottidc@gmail.com>
This new version reports the size as a number of bytes instead of a
human readable string, so we have to take care of converting back to a
readable GB format ourselves.
Signed-off-by: Juan Cruz Viotti <jviottidc@gmail.com>
This refactoring will be useful on future changes, where there will be
a single application entry point that will execute the CLI or the GUI
version depending on the environment.
Signed-off-by: Juan Cruz Viotti <jviottidc@gmail.com>
