This commit introduces a `RELEASE_TYPE` option to the Makefile, which
can be either `production` or `snapshot`. If its `production`, the
behaviour its same as it was before.
If `RELEASE_TYPE` is `snapshot`, the shorter version of the current
commit hash is appended to the version (replacing the
`APPLICATION_VERSION` in the Makefile, as well as the `package.json`
version inside the `.asar`), and the publish scripts get configured to
deploy to different "snapshot" locations.
This commit also reduces the size of the version tag in the bottom right
corner a bit so that it fits when the commit hash is appended to it.
Signed-off-by: Juan Cruz Viotti <jviotti@openmailbox.org>
We've recently moved the compiled CSS output to `lib/gui/css/main.css`,
however we didn't update the relative path to Bootstrap icon web font,
causing every icon to break.
See: https://github.com/resin-io/etcher/pull/1002
Change-Type: patch
Signed-off-by: Juan Cruz Viotti <jviotti@openmailbox.org>
Recently, we've added support for a `recommendedDriveSize` property in
the `manifest.json` of extended image archives, which the image can use
to warn the user that his drive, even if it is large enough to hold the
image, might not be large enough to deliver a good usage experience
later on.
When this property is found, the GUI reacts in the following ways:
- Drives that are large enough to hold the image but don't meet the
recommended drive size are tagged with a warning label in the drive
selector component.
- Attempting to select a "labeled" drive opens a warning modal asking
for user confirmation.
- Drives that don't meet the recommended drive size declared in the
image won't get auto-selected.
- If there is a drive already selected, and the user picks an image
whose recommended drive size is greater than the drive size, the
currently selected drive gets auto-deselected.
Code-wise, the following significant changes have been introduced:
- Implement `SelectionStateModel.getImageRecommendedDriveSize()`.
- Implement `SelectionStateModel.isDriveSizeRecommended()`.
- Extract `WarningModal` out of the settings page (the dangerous setting
modal).
Change-Type: minor
Changelog-Entry: Allow images to declare a recommended minimum drive size.
See: https://github.com/resin-io-modules/etcher-image-stream/pull/36
Fixes: https://github.com/resin-io/etcher/issues/698
Signed-off-by: Juan Cruz Viotti <jviotti@openmailbox.org>
As a way to simplify the design and make more use of available
components rather than creating specialised ones, we replaced the
`.alert-ribbon` component, which consisted of an orange alert appearing
at the top of the screen for when a validation failed, the drive ran out
of space, or other issues, with a modal.
This change allowed us to remove the "warning"-related colors from the
theme palette.
Signed-off-by: Juan Cruz Viotti <jviotti@openmailbox.org>
Despite all modals sharing the same design and layout, each of theme is
being styled separately, when most of the CSS rules can be moved and
generified to `_modal.scss` and re-used by all of them.
This PR also moves `lib/gui/scss/components/_modal.scss` to the "Modal"
Angular's module.
Signed-off-by: Juan Cruz Viotti <jviotti@openmailbox.org>
The `.button` component is not the responsible of knowing the
`min-width` it should occupy in the actual pages.
Signed-off-by: Juan Cruz Viotti <jviotti@openmailbox.org>
We have some global CSS rules that affect `.alert` living in
`_bootstrap.scss`, however `.alert` is only being used by our
`.alert-ribbon` component, so it makes sense to move those rules over
there.
Signed-off-by: Juan Cruz Viotti <jviotti@openmailbox.org>
Move `.badge` coloring to the main page's style file, since the style we
currently hardcode on the component itself is very tied to the
particular context the badge is being instantiated in.
Signed-off-by: Juan Cruz Viotti <jviotti@openmailbox.org>
`.label-danger` is defined by Bootstrap, and its coloring re-uses what
was defined in `$brand-danger`, which is currently unset.
To prevent the module from going out of sync with our new CSS palette,
we explicitly declare the colorings in the component file.
Signed-off-by: Juan Cruz Viotti <jviotti@openmailbox.org>
This is a big PR that extracts out a sensible set of SCSS color
variables that can be used to customise Etcher's look.
To achieve such goal, the following changes were introduced:
- Create a separate `lib/gui/scss/modules/_theme.scss` to conveniently
hold all SCSS color variables.
- Decouple button styles from Bootstrap's `.btn`.
- Stop configuring Bootstrap colors as a whole using the SCSS variables
it exposes and instead declare them directly in the modules that make
use of them.
- Normalize all modal layouts into one. We had like 3 different modal
layouts, each with their own title/body colors, etc. To simplify the
color palette, we make use of a single modal layout everywhere.
- Remove `.progress-button--primary`. `.progress-button` is now
"primary" by default.
- Be precise about `tick` foreground colors.
- Rename `.label-default` to `.label-inset`.
Signed-off-by: Juan Cruz Viotti <jviotti@openmailbox.org>
This PR integrates SCSS Lint, a tool that will help us keep SCSS tidier.
I've included a sensible configuration at `.scss-lint.yml`, and
documentation on how to install it on `CONTRIBUTING.md`.
The tool will run automatically as part of `npm run lint`.
Signed-off-by: Juan Cruz Viotti <jviotti@openmailbox.org>
There are many SCSS rules in `lib/gui/scss/main.scss` that only apply to
the main page. In order to keep things tidy, those styles were moved to
`lib/gui/pages/main/styles/_main.scss`.
Signed-off-by: Juan Cruz Viotti <jviotti@openmailbox.org>
Currently, we intentionally prevent a drive from being auto-selected if
there was no selected image for UX purposes, however this way of
thinking has been challenged, and we didn't find a real UX problem by
doing this.
As a minor design improvement, we gray out the drive name in the main
window when an image hasn't been selected yet.
Change-Type: minor
Changelog-Entry: Perform drive auto-selection even when there is no selected image.
Signed-off-by: Juan Cruz Viotti <jviottidc@gmail.com>
This setting makes Etcher not filter non-removable drives, allowing you to
arbitrarily write to your system drives.
This is a dangerous option, therefore we present it in a separate section of
the settings page, and show an informative confirmation dialog.
Change-Type: minor
Changelog-Entry: Add an "unsafe" option to bypass drive protection.
Fixes: https://github.com/resin-io/etcher/issues/480
Signed-off-by: Juan Cruz Viotti <jviottidc@gmail.com>
Currently, the modal style style used in this component was declared in
`components/_modal.scss`, however since this srule is very specific to
the update notifier component, its better declared in
`update-notifier/styles`.
Signed-off-by: Juan Cruz Viotti <jviottidc@gmail.com>
This PR introduces two changes to mitigate this problem and overall
provide a better UX:
- Show ellipses in the middle of the image name in the first step if
needed.
- Add a tooltip below the image selection label in the first step to
show a little modal displaying the full path to the image.
Fixes: https://github.com/resin-io/etcher/issues/418
Signed-off-by: Juan Cruz Viotti <jviottidc@gmail.com>
This is a huge improvement over our current approach, which was simply
to cross out the drive without further explanation.
Signed-off-by: Juan Cruz Viotti <jviottidc@gmail.com>
We want to re-use the `label` component without big paddings in other
areas of the application, therefore we move the custom padding to a
separate label modifier.
Signed-off-by: Juan Cruz Viotti <jviottidc@gmail.com>
This is by no means a complete CSS refactoring. There still a lot to be
done. This encompasses mostly:
- Move "Finish page" specific styles to that module.
- Remove unused CSS rules.
- Move generic Bootstrap rules to `_bootstrap.scss`.
Signed-off-by: Juan Cruz Viotti <jviottidc@gmail.com>
* Show speed during check
Signed-off-by: Juan Cruz Viotti <jviottidc@gmail.com>
* Display ETA during flash and check
Fixes: https://github.com/resin-io/etcher/issues/256
Signed-off-by: Juan Cruz Viotti <jviottidc@gmail.com>
* Make .selectImage() dialog return an object with a `path` property
This allows to return more than one value for the selected image,
like image size and other metadata for example.
Signed-off-by: Juan Cruz Viotti <jviottidc@gmail.com>
* Return image size from .selectImage() dialog
This property will be useful to perform some sanity checks, like
ensuring the selected drive is large enough to contain the image.
Signed-off-by: Juan Cruz Viotti <jviottidc@gmail.com>
* Store both the image path and the image size in the selection model
In order to simplify accessing such properties in an encapsulated
manner, `SelectionStateModel.getImage()` was replaced with the following
functions:
- `SelectionStateModel.getImagePath()`.
- `SelectionStateModel.getImageSize()`.
Signed-off-by: Juan Cruz Viotti <jviottidc@gmail.com>
* Increase SelectionStateModel setter validation
The model not providing any kind of validation was the source of some
bugs I encountered while implementing the previous commits that would
not have happened otherwise.
Signed-off-by: Juan Cruz Viotti <jviottidc@gmail.com>
* Prevent selection of drives that are not large enough
- The drive selector modal was modified such that drives that are not
large enough are crossed out, and the user is not able to click them.
- In the case of drive auto-selection, not large enough drives won't
attempt to get autoselected.
This commit introduces:
- The `SelectionStateModel.isDriveLargeEnough()` function.
Fixes: https://github.com/resin-io/etcher/issues/344
Signed-off-by: Juan Cruz Viotti <jviottidc@gmail.com>
Auto-update functionality is not ready for usage. As a workaround to
prevent users staying with older versions, we now check for updates at
startup, and if the user is not running the latest version, we present a
modal informing the user of the availiblity of a new version, and
provide a call to action to open the Etcher website in his web browser.
Extra features:
- The user can skip the update, and tell the program to delay the
notification for 7 days.
Misc changes:
- Center modal with flexbox, to allow more flexibility on the modal height.
interacting with the S3 server.
- Implement `ManifestBindService`, which now serves as a backend for the
`manifest-bind` directive to allow the directive's functionality to be
re-used by other services.
- Namespace checkbox styles that are specific to the settings page.
Fixes: https://github.com/resin-io/etcher/issues/396
Signed-off-by: Juan Cruz Viotti <jviottidc@gmail.com>
This refactoring will be useful on future changes, where there will be
a single application entry point that will execute the CLI or the GUI
version depending on the environment.
Signed-off-by: Juan Cruz Viotti <jviottidc@gmail.com>
