At the moment the progress button which has slightly rounded corners
allows the "__bar" to overflow. This causes the corners to become
angular again which looks weird. I set the button's "overflow" to
"hidden" to fix this issue.
Changelog-Entry: Make sure the progress button is always rounded.
Change-Type: patch
- Add a nice icon in the drive selector dialog when a device has been
discovered through usbboot
- Change the name of usbboot-initialized devices to "Compute Module"
Change-Type: minor
Changelog-Entry: Add eye candy to usbboot initialized devices.
Signed-off-by: Juan Cruz Viotti <jv@jviotti.com>
We experienced timeouts when sending big files (ie ~14 MBs). Setting the
timeout to 0 makes the timeout infinite.
Change-Type: patch
Signed-off-by: Juan Cruz Viotti <jv@jviotti.com>
This commit installs `node-usb` v1.3.0 from GitHub, since that version
was never published to NPM, and is the only one that works with Visual
Studio 2015 (see https://github.com/tessel/node-usb/issues/109).
The usbboot communicates with a Raspberry Pi / Amber through USB and
eventually mounts it as a block device we can write to.
This feature bundles bootcode.bin and start.elf from the original
usbboot implementation.
The flow is the following:
- On each scan, the usbboot scanner will try to get a usbboot compatible
USB device to the next "phase", until they are all transformed to
block devices the user can flash to as usual
Change-Type: minor
Changelog-Entry: Integrate Raspberry Pi's usbboot technology.
Fixes: https://github.com/resin-io/etcher/issues/1541
See: https://github.com/raspberrypi/usbboot
Signed-off-by: Juan Cruz Viotti <jv@jviotti.com>
This allows selection of images without a secondary file extension
(i.e. `example.gz`, compared to `example.img.gz`) by defaulting to `img`
in the image-stream handlers, should no secondary extension be found.
Further this adjusts `.getPenultimateFileExtension()` to return `null`
if the detected penultimate extension is not a known file extension.
Change-Type: patch
This removes `Bluebird.props()` from the image type handlers,
as it's just a remnant when some properties in the return value
were Promises that needed resolving.
Change-Type: patch
Connects To: #1724
We recently added a "pending" flag to all drives that represents whether
the drive is ready for selection or not. This flag will be used by the
"usbboot" flashing adaptor, which will emit various "pending" USB
devices while it converts them to block devices that can actually be
flashed.
In terms of the GUI, the following visible changes were made:
- Drives with a `pending: true` property will be disabled in the drive
selector window
- Drives with a `pending: true` property have a "PENDING" red badge
See: https://github.com/resin-io/etcher/pull/1707
See: https://github.com/resin-io/etcher/pull/1686
Signed-off-by: Juan Cruz Viotti <jv@jviotti.com>
This is a major first step towards adopting an SDK architecture. This
commit creates an SDK adaptor with a `.scan()` function that uses
`drivelist` under the hood. Then, an SDK orchestrator is used to provide
drive scanning capabilities to the GUI.
Here's a list of some particularly interesting changes:
- The drives returned by the SDK adaptor now have a "pending" and an
"adaptor" property. The "pending" property is a boolean flag that
determines if the drive is ready to be used (this will come handy for
usbboot), while the "adaptor" property simply contains the name of the
adaptor that drive came from
- The GUI drive scanner Rx implementation was replaces with a "promise
loop." Before, the drive scanning routine would be called every 2
seconds (without waiting for the previous scan to complete), while
now, the next scan happens *after* the previous scan completes. For
this reason, I reduced the drive scanning interval timeout to match
the timing we had before
Change-Type: patch
See: https://github.com/resin-io/etcher/pull/1686
Signed-off-by: Juan Cruz Viotti <jv@jviotti.com>
As another step towards moving to GitHub Releases, this commit makes the
application care much less about the actual release type of the current
version, instead checking if the application is stable or not, which is
more aligned to what GitHub provides us.
Signed-off-by: Juan Cruz Viotti <jv@jviotti.com>
This disables full wildcard debug output by default now,
leave the possibility to manually enable selective debug output
via the `DEBUG` environment variable.
Change-Type: patch
This checks for `parsererror`s in the DOMParser's returned document,
to prevent re-use of the previous image and avoid displaying an error
document in the SVG icon slot.
Change-Type: patch
Changelog-Entry: Avoid "broken" icon when selecting a zip image archive with invalid SVG.
We send an HTTP request to S3 to determine the latest available version.
There are various error that can happen that we don't have control over
(like `ETIMEDOUT`).
The current approach is to whitelist certain errors and pretend there is
no update available, however this commit improves that whole situation.
Instead of swallowing these errors, we throw a user error from the
function that determines the latest available version. From the
application code, we check if that function throws a user error, and if
so, instead of showing it to the user, we log a mixpanel event and carry
on.
This change is motivated by the latest reporter error we can't do
anything about: `UNABLE_TO_GET_ISSUER_CERT_LOCALLY`.
Fixes: https://github.com/resin-io/etcher/issues/1525
Change-Type: patch
Changelog-Entry: Fix `UNABLE_TO_GET_ISSUER_CERT_LOCALLY` error at startup when behind certain proxies.
Signed-off-by: Juan Cruz Viotti <jv@jviotti.com>
- Extend the `standard` ESLint configuration
- Remove ESLint rules that are defined in the `standard` configuration
- Get rid of semi-colons
See: https://github.com/resin-io/etcher/pull/1657
Signed-off-by: Juan Cruz Viotti <jv@jviotti.com>
This commit changes the whole codebase to adhere to all StandardJS
guidelines rules except semicolons, since the removal of semicolons
affect pretty much all lines, and the final diff is very hard to follow
(and to assess other more involved changes).
In a nutshell:
- When using `function`, we now require a space before the opening
parenthesis
- If a line with operators is broken into multiple lines, the operator
should now go after the line break
- Unnecessary padding lines are now forbidden
There were also some minor things that the `standard` CLI caught that I
updated here.
See: https://standardjs.com
Signed-off-by: Juan Cruz Viotti <jv@jviotti.com>
There's not much we can do if we can't connect to S3 to determine the
latest available versions when checking if we should show an update
notification dialog or not.
As with similar errors, lets swallow this particular one, and try again
the next time Etcher runs.
Change-Type: patch
Changelog-Entry: Fix `EHOSTDOWN` error at startup.
Fixes: https://github.com/resin-io/etcher/issues/1645
Signed-off-by: Juan Cruz Viotti <jv@jviotti.com>
Change-Type: patch
Changelog-Entry: Display a user-friendly error message if the user is not in the sudoers file.
Signed-off-by: Juan Cruz Viotti <jv@jviotti.com>
We make the size units used the closest relative unit through a new
filter `closestUnit` replacing the old `gigabyte` filter.
Changelog-Entry: Round byte sizes to the more appropriate unit.
* remove filters folder
* new shrinkwrap, add to package.json
* test
We make the svg-icon component accept XML in its path argument to handle
archive-embedded SVG icons.
Changelog-Entry: Make archive-embedded SVG icons work again.
Fixes: https://github.com/resin-io/etcher/issues/1636
The `flashComplete` message takes the drive object and the image
basename as arguments. This was updated on the GUI, but causes the CLI
to throw an error upon completion.
Change-Type: patch
Changelog-Entry: Fix "imageBasename is not defined" error on the CLI.
Signed-off-by: Juan Cruz Viotti <jv@jviotti.com>
Support the rpi-sdcard image file type output by Yocto for
the Raspberry Pi device.
Change-Id: Ia7e3aef0d90fdf21d373a560e6dd2b96e6b51da8
Changelog-Entry: Add support for `.rpi-sdcard` images.
This is part of the process of implementing support for a configuration
file. We previously decoupled the Redux store from localStorage by
moving the logic that actually persists the data to localStorage to a
local-settings.js file, however the localStorage API is synchronous, so
it follows that at the moment, all functions that interact with are also
synchronous.
Moving to storing the settings to a file means turning all these
functions to promises, which we do in this commit, in order to not mix
the addition of the configuration file feature with the huge amount of
refactoring it requires.
See: https://github.com/resin-io/etcher/issues/1356
Change-Type: patch
Signed-off-by: Juan Cruz Viotti <jv@jviotti.com>
This commit refactors the xz and gzip image handlers to pass/use a
custom read function to be able to determine the uncompressed size, and
other needed metadata.
By using this function (which currently only uses the `fs` module), we
can implement support for getting the uncompressed size of compressed
files using HTTP Ranges.
Change-Type: patch
Signed-off-by: Juan Cruz Viotti <jv@jviotti.com>
Simply running `_.merge` on an Error object results in an empty plain
object `{}` being sent to Mixpanel/Sentry.
Signed-off-by: Juan Cruz Viotti <jv@jviotti.com>
Now that the Redux store is no longer front-end dependent, we can move
most of the models to lib/shared. Currently, lib/shared is a mess, and
contains all sorts of functionality, however moving things out of the
GUI is the first step. Once we have everything decoupled, we can
organise all the code we have there.
Signed-off-by: Juan Cruz Viotti <jv@jviotti.com>
This commit fixes a subtle issue where we are calling a non-existing
function of an error object, instead of using the exception reporter
module.
Change-Type: patch
Signed-off-by: Juan Cruz Viotti <jv@jviotti.com>
This is a small refactoring commit that extracts the MIME related
function from utils.js into a new file called mime.js, and stores the
default image MIME type there as a constant, to avoid duplicating it in
multiple parts of the code.
Change-Type: patch
Signed-off-by: Juan Cruz Viotti <jv@jviotti.com>
This commit adds a `packageType` property to package.json, which is set
according to the package type of the Etcher target (e.g: dmg, nsis, deb,
etc).
This information is then sent to Mixpanel as the `packageType` property
of the "Application start" event.
Change-Type: patch
Changelog-Entry: Send anonymous analytics about package types.
Fixes: https://github.com/resin-io/etcher/issues/1328
Signed-off-by: Juan Cruz Viotti <jv@jviotti.com>
This is a small initial step towards decoupling the image stream
handlers from the concept of a "file."
Change-Type: patch
Signed-off-by: Juan Cruz Viotti <jv@jviotti.com>
This plugin helps us detect some things the built-in jsdoc rules can't,
like whether there is an example or not.
As expected, the addition of this plugin helped detect some minor JSDoc
issues.
Signed-off-by: Juan Cruz Viotti <jv@jviotti.com>
We remove the Angular dependency from `lib/gui/os/dialog` and
`lib/gui/modules/error` which is also now renamed to
`lib/gui/modules/exception`.
Changelog-Entry: Deangular the os-dialog and error modules
The lib/gui/etcher.js file contained a workaround to an Electron issue
that have since then been solved. In summary:
- Replace the `did-finish-load` event of `webContents` with
`ready-to-show`, which is only emitted when the whole webview has
finished loading
Change-Type: patch
Signed-off-by: Juan Cruz Viotti <jv@jviotti.com>
After https://github.com/resin-io/etcher/pull/1569, the redux store can
run outside of a browser context. This commit moves it to `lib/shared`,
where we will likely move all the other models as well. As an extra, I
renamed `Store` to `store`, since there was no reason for that variable
to be capitalized.
Change-Type: patch
Signed-off-by: Juan Cruz Viotti <jv@jviotti.com>
We're currently persisting the user settings in localSettings by using a
redux plugin called redux-localstorage. As a way to decouple the redux
store from a technology that is browser specific, this commit makes the
following changes:
- Create local-settings.js, which is concerned with managing settings in
a persisting location
- Decouple the redux store from the persisting storage method
- Extend the settings model to persist settings, cache reads, etc
Change-Type: patch
Signed-off-by: Juan Cruz Viotti <jv@jviotti.com>
- Exclude *.dll/*.exe files from the asar in non-Windows operating
systems (from 19.8.0)
- Correctly parse boolean flags in `--extraMetadata` (in v19.9.0)
See: https://github.com/electron-userland/electron-builder/releases/tag/v19.9.1
Change-Type: patch
Signed-off-by: Juan Cruz Viotti <jv@jviotti.com>
* feat(gui): Friendly error dialog when opening image fails
This displays a friendlier error dialog if opening an image fails
due any reason (like i.e. an unsupported compression method)
Change-Type: patch
* test(image-stream): Add test for unsupported compression method
* test(image-stream): Only check `error.description` when given
* test(image-stream): Add zip-deflate64.zip
The electron-builder configuration we're putting in package.json is
growing. To make it easier to read and edit, we'll move the whole
`build` property into a configuration file called
`electron-builder.yml`.
Change-Type: patch
Signed-off-by: Juan Cruz Viotti <jv@jviotti.com>
We swap the placement of the progress speed and time residing below the
progress bar.
Changelog-Entry: Swap speed and time below the flashing progress bar.
Closes: https://github.com/resin-io/etcher/issues/1312
This commit is the first on a series of commit to incrementally
implement support for configuration files (so we avoid a huge PR like we
have at the moment).
Once of the first things we can do is replace the `SET_SETTING` redux
action with an atomic `SET_SETTINGS` action that sets all the settings
for the application at once.
The purpose of this change is that later the `SET_SETTINGS` action can
be modified to stringify all the settings and store them in a
configuration file, without having to deal with merges, conflicts, etc
(since the client application if forced to resolve those problems before
calling the `SET_SETTINGS` action.)
The behaviour of the code remains almost the same, with the exception
that the user can now set settings that we don't know about, so the user
can switch between Etcher versions without getting weird errors if one
of the configuration keys he has doesn't exist in the other version.
See: https://github.com/resin-io/etcher/pull/1382
Change-Type: patch
Signed-off-by: Juan Cruz Viotti <jv@jviotti.com>
Etcher supports disabling the update notification dialog by setting the
`ETCHER_DISABLE_UPDATES` environment variable.
In order to simplify disabling updates for when these are managed by a
package manager (e.g. in a debian package), this removes support for the
`ETCHER_DISABLE_UPDATES` environment variable, and instead requires
packagers to tweak the `updates.enabled` property of the package.json
file, which is set to `true` by default.
We don't want to encourage end users to disable the update mechanism, so
the documention was removed from `USER-DOCUMENTATION.md`. This option
will remain as something only packagers should tweak.
Change-Type: minor
Changelog-Entry: Remove support for the `ETCHER_DISABLE_UPDATES` environment variable.
Signed-off-by: Juan Cruz Viotti <jv@jviotti.com>
