Update translations

translations/cs.json

@@ -279,7 +279,9 @@
     "state_badge": {
         "default": {
             "unknown": "Neví se",
-            "unavailable": "Není"
+            "unavailable": "Není",
+            "error": "Chyba",
+            "entity_not_found": "Entita nenalezena"
         },
         "alarm_control_panel": {
             "armed": "Aktivní",
@@ -606,7 +608,17 @@
                     "caption": "ZHA",
                     "description": "Správa Zigbee Home Automation",
                     "services": {
-                        "reconfigure": "Překonfigurovat zařízení ZHA (opravit zařízení). Použijte, pokud se zařízením máte problémy. Je-li dotyčné zařízení napájené bateriemi, ujistěte se prosím, že je při používání této služby spuštěné a přijímá příkazy."
+                        "reconfigure": "Překonfigurovat zařízení ZHA (opravit zařízení). Použijte, pokud se zařízením máte problémy. Je-li dotyčné zařízení napájené bateriemi, ujistěte se prosím, že je při používání této služby spuštěné a přijímá příkazy.",
+                        "updateDeviceName": "V registru zařízení nastavte vlastní název tohoto zařízení.",
+                        "remove": "Odstranit zařízení ze sítě Zigbee."
+                    },
+                    "device_card": {
+                        "area_picker_label": "Oblast"
+                    },
+                    "add_device_page": {
+                        "header": "Zigbee Home Automation - Přidat zařízení",
+                        "spinner": "Hledání zařízení ZHA Zigbee ...",
+                        "discovery_text": "Zde se objeví nalezená zařízení. Postupujte dle pokynů pro vaše zařízení a uveďte je do režimu párování."
                     }
                 },
                 "area_registry": {
@@ -616,7 +628,9 @@
                         "header": "Registr oblastí",
                         "introduction": "Oblasti se používají k uspořádání zařízení podle místa kde jsou. Tato informace bude použita k organizaci rozhraní, k nastavení oprávnění a v integraci s ostatnímy systémy.",
                         "introduction2": "Pro přídání zařízení do oblasti přejděte na stránku integrací pomocí odkazu níže tam klikněte na nakonfigurovanou integraci abyste se dostali na kartu zažízení.",
-                        "integrations_page": "Stránka integrací"
+                        "integrations_page": "Stránka integrací",
+                        "no_areas": "Vypadá to, že ještě nemáte žádné oblasti!",
+                        "create_area": "VYTVOŘIT OBLAST"
                     },
                     "no_areas": "Vypadá to, že ještě nemáte žádné oblasti!",
                     "create_area": "VYTVOŘIT OBLAST",
@@ -830,11 +844,13 @@
                     "data": {
                         "name": "Jméno",
                         "username": "Uživatelské jméno",
-                        "password": "Heslo"
+                        "password": "Heslo",
+                        "password_confirm": "Potvrzení hesla"
                     },
                     "create_account": "Vytvořit účet",
                     "error": {
-                        "required_fields": "Vyplňte všechna povinná pole"
+                        "required_fields": "Vyplňte všechna povinná pole",
+                        "password_not_match": "Hesla se neshodují"
                     }
                 }
             },
@@ -1156,5 +1172,9 @@
                 "auto": "Automaticky"
             }
         }
+    },
+    "groups": {
+        "system-admin": "Správci",
+        "system-users": "Uživatelé"
     }
 }

translations/cy.json

@@ -267,7 +267,9 @@
     "state_badge": {
         "default": {
             "unknown": "?",
-            "unavailable": "off"
+            "unavailable": "off",
+            "error": "Gwall",
+            "entity_not_found": "Heb ganfod endid"
         },
         "alarm_control_panel": {
             "armed": "Arfogi",
@@ -541,11 +543,32 @@
                     "caption": "Z-Wave",
                     "description": "Rheoli eich rhwydwaith Z-Wave"
                 },
+                "integrations": {
+                    "config_entry": {
+                        "hub": "Cysylltiad drwy",
+                        "firmware": "Cadarnwedd: {version}",
+                        "device_unavailable": "Dyfais ddim ar gael",
+                        "entity_unavailable": "endid ar gael",
+                        "no_area": "Dim Ardal"
+                    }
+                },
                 "zha": {
                     "caption": "ZHA",
                     "description": "Rheoli rhwydwaith awtomatiaeth cartref Zigbee",
                     "services": {
-                        "reconfigure": "Ad-drefnu ddyfais ZHA (gwella dyfais). Defnyddiwch hwn os ydych yn cael problemau gyda'r ddyfais. Os ydi'r ddyfais dan sylw wedi pweru á batri, plis gwnewch yn siwr bod o'n ddeffro a derbyn gorchmynion pan fyddwch yn defnyddio gwasanaeth hwn."
+                        "reconfigure": "Ad-drefnu ddyfais ZHA (gwella dyfais). Defnyddiwch hwn os ydych yn cael problemau gyda'r ddyfais. Os ydi'r ddyfais dan sylw wedi pweru á batri, plis gwnewch yn siwr bod o'n ddeffro a derbyn gorchmynion pan fyddwch yn defnyddio gwasanaeth hwn.",
+                        "updateDeviceName": "Gosod enw personol ar gyfer y ddyfais hon yn y gofrestrfa ddyfais.",
+                        "remove": "Tynnwch ddyfais o'r rhwydwaith ZigBee."
+                    },
+                    "device_card": {
+                        "device_name_placeholder": "Enw a roddwyd gan y defnyddiwr",
+                        "area_picker_label": "Ardal",
+                        "update_name_button": "Diweddaru Enw"
+                    },
+                    "add_device_page": {
+                        "header": "Awtomeiddiad Cartref Zigbee - Ychwanegwch Dyfeisiadau",
+                        "spinner": "Chwilio am ddyfeisiau ZHA Zigbee ...",
+                        "discovery_text": "Bydd dyfeisiau a ddarganfuwyd yn ymddangos yma. Dilynwch y cyfarwyddiadau ar gyfer eich dyfais \/ dyfaisiau a rhowch y ddyfais \/ dyfeisiau yn y modd paru."
                     }
                 },
                 "area_registry": {
@@ -555,7 +578,9 @@
                         "header": "Gofrestrfa ardal",
                         "introduction": "Defnyddir ardaloedd i drefnu lle mae dyfeisiau. Defnyddir y wybodaeth hon drwy gydol Home Assistant i helpu chi i drefnu eich rhyngwyneb, caniatadau ac integreiddio â systemau eraill.",
                         "introduction2": "I osod dyfeisiau mewn ardal, defnyddiwch y ddolen isod i fynd i'r dudalen integreiddio ac yna cliciwch ar integreiddiau wedi'i ffurfweddu i gyrraedd y cardiau dyfais.",
-                        "integrations_page": "Tudalen rhyngwynebu"
+                        "integrations_page": "Tudalen rhyngwynebu",
+                        "no_areas": "Edrych fel nad oes gennych ardaloedd eto!",
+                        "create_area": "CREU ARDAL"
                     },
                     "no_areas": "Edrych fel nad oes gennych ardaloedd eto!",
                     "create_area": "CREU ARDAL",
@@ -593,11 +618,6 @@
                         "device_tracker_pick": "Dewiswch dyfeis i'w dracio"
                     }
                 },
-                "integrations": {
-                    "config_entry": {
-                        "no_area": "Dim Ardal"
-                    }
-                },
                 "users": {
                     "editor": {
                         "caption": "Gweld defnyddiwr"
@@ -612,8 +632,33 @@
                 }
             },
             "lovelace": {
+                "cards": {
+                    "shopping-list": {
+                        "checked_items": "Eitemau wedi ticio",
+                        "clear_items": "Clirio eitemau wedi ticio",
+                        "add_item": "Ychwanegu eitem"
+                    },
+                    "empty_state": {
+                        "title": "Croeso Gartref",
+                        "no_devices": "Mae'r dudalen hon yn eich galluogi i reoli'ch dyfeisiau, ond mae'n edrych fel nad oes gennych ddyfeisiau wedi eu sefydlu eto. Ewch i'r dudalen integreiddio i ddechrau.",
+                        "go_to_integrations_page": "Ewch i'r dudalen integreiddio."
+                    }
+                },
                 "editor": {
+                    "edit_card": {
+                        "header": "Ffurfweddu Cerdyn",
+                        "save": "Arbed",
+                        "toggle_editor": "Toglo Golygydd",
+                        "pick_card": "Dewiswch y cerdyn rydych eisiau ychwanegu",
+                        "add": "Ychwanegu Cerdyn",
+                        "edit": "Golygu",
+                        "delete": "Dileu",
+                        "move": "Symud"
+                    },
                     "migrate": {
+                        "header": "Ffurfweddiad anghydnaws",
+                        "para_no_id": "Tydi'r elfen yma ddim efo ID. Plís ychwanegwch ID i'r elfen yma yn 'ui-lovelace.yaml'.",
+                        "para_migrate": "Gall Home Assistant ychwanegu IDs i bob un o'ch cardiau ac edrychiadau yn awtomatig i chi wrth bwyso'r botwm 'Mudo ffurfweddiad'.",
                         "migrate": "Mudo ffurfweddiad"
                     },
                     "header": "Golygu rhyngwyneb defnyddiwr",
@@ -623,13 +668,6 @@
                         "edit": "Golygu golwg",
                         "delete": "Delete golwg"
                     },
-                    "edit_card": {
-                        "pick_card": "Dewiswch y cerdyn rydych eisiau ychwanegu",
-                        "add": "Ychwanegu Cerdyn",
-                        "edit": "Golygu",
-                        "delete": "Dileu",
-                        "move": "Symud"
-                    },
                     "save_config": {
                         "header": "Cymerwch reolaeth ar eich rhyngwyneb defnyddiwr Lovelace",
                         "para": "Gwneith Home Assistant gynnal eich rhyngwyneb defnyddiwr yn ddiofyn, a'i diweddaru pan fydd endidau neu gydrannau Lovelace newydd yn dod ar gael. Os ydych yn cymryd rheolaeth nawn ddim gwneud newidiadau awtomatig pellach i chi.",
@@ -653,13 +691,6 @@
                     "help": "Help",
                     "refresh": "Adnewyddu"
                 },
-                "cards": {
-                    "empty_state": {
-                        "title": "Croeso Gartref",
-                        "no_devices": "Mae'r dudalen hon yn eich galluogi i reoli'ch dyfeisiau, ond mae'n edrych fel nad oes gennych ddyfeisiau wedi eu sefydlu eto. Ewch i'r dudalen integreiddio i ddechrau.",
-                        "go_to_integrations_page": "Ewch i'r dudalen integreiddio."
-                    }
-                },
                 "warning": {
                     "entity_not_found": "Endid ddim ar gael: {entity}",
                     "entity_non_numeric": "Endid di-rhifol: {entity}"
@@ -693,6 +724,16 @@
                         }
                     }
                 }
+            },
+            "page-onboarding": {
+                "user": {
+                    "data": {
+                        "password_confirm": "Cadarnhewch y Cyfrinair"
+                    },
+                    "error": {
+                        "password_not_match": "Cyfrineiriau ddim yn cyfateb"
+                    }
+                }
             }
         },
         "sidebar": {
@@ -753,7 +794,16 @@
                 },
                 "forecast": "Rhagolwg"
             },
+            "water_heater": {
+                "currently": "Ar hyn o bryd",
+                "on_off": "Ar \/ i ffwrdd",
+                "target_temperature": "Tymheredd targed",
+                "operation": "Gweithredu",
+                "away_mode": "Dull i ffwrdd"
+            },
             "alarm_control_panel": {
+                "arm_night": "Larwm nos",
+                "armed_custom_bypass": "Ffordd osgoi personol",
                 "arm_custom_bypass": "Ffordd osgoi personol"
             }
         },
@@ -844,5 +894,10 @@
                 "auto": "Awto"
             }
         }
+    },
+    "groups": {
+        "system-admin": "Gweinyddwyr",
+        "system-users": "Defnyddwyr",
+        "system-read-only": "Defnyddwyr Darllen yn Unig"
     }
 }

translations/de.json

@@ -606,7 +606,7 @@
                 },
                 "zha": {
                     "caption": "ZHA",
-                    "description": "Zigbee Home Automation Netzwerkmanagement",
+                    "description": "ZigBee Home Automation Netzwerkmanagement",
                     "services": {
                         "reconfigure": "Rekonfiguriere ZHA-Gerät (Gerät heilen). Benutze dies, wenn du Probleme mit dem Gerät hast. Wenn es sich bei dem betroffenden Gerät um ein batteriebetriebenes Gerät handelt, stelle sicher dass es wach ist und Kommandos akzeptiert wenn du diesen Dienst benutzt.",
                         "updateDeviceName": "Lege einen benutzerdefinierten Namen für dieses Gerät in der Geräteregistrierung fest.",
@@ -618,8 +618,8 @@
                         "update_name_button": "Name aktualisieren"
                     },
                     "add_device_page": {
-                        "header": "Zigbee Home Automation - Geräte hinzufügen",
+                        "header": "ZigBee Home Automation - Geräte hinzufügen",
-                        "spinner": "Suche nach ZHA Zigbee Geräten... ",
+                        "spinner": "Suche nach ZHA ZigBee Geräten... ",
                         "discovery_text": "Erkannte Geräte werden hier angezeigt. Befolgen Sie die Anweisungen für Ihr Gerät und versetzen Sie das Gerät in den Pairing-Modus."
                     }
                 },

translations/el.json

@@ -1066,7 +1066,7 @@
         },
         "notification_toast": {
             "entity_turned_on": "Ενεργοποιημένο στο {entity} .",
-            "entity_turned_off": "Απενεργοποίηση {entity} .",
+            "entity_turned_off": "Απενεργοποίηση {entity}.",
             "service_called": "Επιτυχής κλήση στην υπηρεσία {service}",
             "service_call_failed": "Απέτυχε η κλήση στην υπηρεσία {service}.",
             "connection_lost": "Η σύνδεση χάθηκε. Επανασύνδεση ..."
@@ -1138,7 +1138,7 @@
         "updater": "Επικαιροποιητής",
         "weblink": "Σύνδεσμος",
         "zwave": "Z-Wave",
-        "vacuum": "Εκκένωση ",
+        "vacuum": "Εκκένωση",
         "zha": "ΖΗΑ",
         "hassio": "Hass.io",
         "homeassistant": "Home Assistant",

translations/es-419.json

@@ -279,7 +279,9 @@
     "state_badge": {
         "default": {
             "unknown": "Desconocido",
-            "unavailable": "No Disponible"
+            "unavailable": "No Disponible",
+            "error": "Error",
+            "entity_not_found": "Entidad no encontrada"
         },
         "alarm_control_panel": {
             "armed": "Activado",
@@ -607,7 +609,18 @@
                     "description": "Gestión de red de Zigbee Home Automation",
                     "services": {
                         "reconfigure": "Reconfigure el dispositivo ZHA (dispositivo de curación). Use esto si tiene problemas con el dispositivo. Si el dispositivo en cuestión es un dispositivo alimentado por batería, asegúrese de que esté activado y acepte los comandos cuando utilice este servicio.",
-                        "updateDeviceName": "Establecer un nombre personalizado para este dispositivo en el registro de dispositivos."
+                        "updateDeviceName": "Establecer un nombre personalizado para este dispositivo en el registro de dispositivos.",
+                        "remove": "Eliminar un dispositivo de la red ZigBee."
+                    },
+                    "device_card": {
+                        "device_name_placeholder": "Nombre de usuario",
+                        "area_picker_label": "Área",
+                        "update_name_button": "Actualizar Nombre"
+                    },
+                    "add_device_page": {
+                        "header": "Automatización del hogar Zigbee - Agregar dispositivos",
+                        "spinner": "Buscando dispositivos ZHA Zigbee ...",
+                        "discovery_text": "Los dispositivos descubiertos se mostrarán aquí. Siga las instrucciones para su(s) dispositivo(s) y coloque el(los) dispositivo(s) en modo de emparejamiento."
                     }
                 },
                 "area_registry": {

translations/es.json

@@ -279,7 +279,9 @@
     "state_badge": {
         "default": {
             "unknown": "?",
-            "unavailable": "N\/D"
+            "unavailable": "N\/D",
+            "error": "Error",
+            "entity_not_found": "Entidad no encontrada"
         },
         "alarm_control_panel": {
             "armed": "Armado",
@@ -374,7 +376,7 @@
                         "pick_automation": "Elija la automatización para editar",
                         "no_automations": "No pudimos encontrar ninguna automatización editable",
                         "add_automation": "Añadir automatización",
-                        "learn_more": "Aprende más sobre automatizaciones."
+                        "learn_more": "Aprende más sobre las automatizaciones"
                     },
                     "editor": {
                         "introduction": "Use automatizaciones para dar vida a su hogar.",
@@ -462,7 +464,7 @@
                                     "leave": "Salir"
                                 }
                             },
-                            "learn_more": "Aprenda más sobre los desencadenantes"
+                            "learn_more": "Aprende más sobre los disparadores"
                         },
                         "conditions": {
                             "header": "Condiciones",
@@ -508,7 +510,7 @@
                                     "zone": "Zona"
                                 }
                             },
-                            "learn_more": "Aprende más sobre las condiciones."
+                            "learn_more": "Aprende más sobre las condiciones"
                         },
                         "actions": {
                             "header": "Acciones",
@@ -607,7 +609,18 @@
                     "description": "Gestión de red de Zigbee Home Automation",
                     "services": {
                         "reconfigure": "Reconfigura el dispositivo ZHA (curar dispositivo). Usa esto si tienes problemas con el dispositivo. Si el dispositivo en cuestión es un dispositivo alimentado por batería, asegurate de que está activo y aceptando comandos cuando uses este servicio.",
-                        "updateDeviceName": "Establezca un nombre personalizado para este dispositivo en el registro de dispositivos."
+                        "updateDeviceName": "Establezca un nombre personalizado para este dispositivo en el registro de dispositivos.",
+                        "remove": "Eliminar un dispositivo de la red ZigBee."
+                    },
+                    "device_card": {
+                        "device_name_placeholder": "Nombre dado por el usuario",
+                        "area_picker_label": "Área",
+                        "update_name_button": "Cambiar nombre"
+                    },
+                    "add_device_page": {
+                        "header": "Domótica Zigbee - Añadir dispositivos",
+                        "spinner": "Buscando dispositivos ZHA Zigbee....",
+                        "discovery_text": "Los dispositivos detectados aparecerán aquí. Ponlos en modo emparejamiento siguiendo sus instrucciones."
                     }
                 },
                 "area_registry": {
@@ -834,7 +847,7 @@
                         "name": "Nombre",
                         "username": "Nombre de usuario",
                         "password": "Contraseña",
-                        "password_confirm": "Confirmar Contraseña"
+                        "password_confirm": "Confirmar contraseña"
                     },
                     "create_account": "Crear una cuenta",
                     "error": {
@@ -1074,7 +1087,7 @@
         "dialogs": {
             "more_info_settings": {
                 "save": "Guardar",
-                "name": "Nombre",
+                "name": "Anulación de nombre",
                 "entity_id": "Identificación de la entidad"
             },
             "more_info_control": {

translations/eu.json

@@ -227,6 +227,10 @@
         "person": {
             "home": "Etxean",
             "not_home": "Kanpoan"
+        },
+        "default": {
+            "error": "Errorea",
+            "entity_not_found": "Ez da Entitatea Aurkitu"
         }
     },
     "ui": {
@@ -323,6 +327,7 @@
                                     "leave": "Utzi"
                                 },
                                 "time_pattern": {
+                                    "label": "Denbora Eredua",
                                     "hours": "Orduak",
                                     "minutes": "Minutuak",
                                     "seconds": "Segunduak"
@@ -432,10 +437,21 @@
                 "zha": {
                     "caption": "ZHA",
                     "services": {
-                        "updateDeviceName": "Gailu honentzako izen pertsonalizatua ezarri gailuen erregistroan."
+                        "updateDeviceName": "Gailu honentzako izen pertsonalizatua ezarri gailuen erregistroan.",
+                        "remove": "ZigBee saretik gailu guztiak kendu"
+                    },
+                    "device_card": {
+                        "device_name_placeholder": "Erabiltzaileak emandako izena",
+                        "area_picker_label": "Gunea",
+                        "update_name_button": "Izena Eguneratu"
+                    },
+                    "add_device_page": {
+                        "header": "Zigbee Home Automation - Gailuak Gehitu",
+                        "spinner": "ZHA Zigbee gailuak bilatzen..."
                     }
                 },
                 "area_registry": {
+                    "caption": "Gune Erregistroa",
                     "picker": {
                         "header": "Gune Erregistroa",
                         "integrations_page": "Integrazioen orria",
@@ -451,7 +467,9 @@
                     }
                 },
                 "entity_registry": {
+                    "caption": "Entitate Erregistroa",
                     "picker": {
+                        "header": "Entitate Erregistroa",
                         "unavailable": "(ez dago eskuragarri)",
                         "integrations_page": "Integrazioak"
                     },
@@ -641,7 +659,13 @@
                 },
                 "menu": {
                     "configure_ui": "Erabiltzaile interfazea konfiguratu",
-                    "help": "Laguntza"
+                    "unused_entities": "Erabili gabeko entitateak",
+                    "help": "Laguntza",
+                    "refresh": "Freskatu"
+                },
+                "warning": {
+                    "entity_not_found": "Entitatea ez dago eskuragarri: {entity}",
+                    "entity_non_numeric": "Entitatea ez da zenbakizkoa: {entity}"
                 }
             },
             "logbook": {

translations/fr.json

@@ -81,8 +81,8 @@
                 "on": "Dangereux"
             },
             "presence": {
-                "off": "Absent",
+                "off": "Absent.e",
-                "on": "Présent"
+                "on": "Présent.e"
             },
             "battery": {
                 "off": "Normal",
@@ -279,7 +279,9 @@
     "state_badge": {
         "default": {
             "unknown": "Inconnu",
-            "unavailable": "Indisponible"
+            "unavailable": "Indisponible",
+            "error": "Erreur",
+            "entity_not_found": "Entité introuvable"
         },
         "alarm_control_panel": {
             "armed": "Activé",
@@ -479,7 +481,7 @@
                                     "state": "État"
                                 },
                                 "numeric_state": {
-                                    "label": "État numérique",
+                                    "label": "Valeur numérique",
                                     "above": "Dessus",
                                     "below": "Sous",
                                     "value_template": "Contenu du template (optionnel)"
@@ -607,7 +609,18 @@
                     "description": "Gestion de réseau domotique ZigBee",
                     "services": {
                         "reconfigure": "Reconfigurer le périphérique ZHA. Utilisez cette option si vous rencontrez des problèmes avec le périphérique. Si l'appareil en question est un appareil alimenté par batterie, assurez-vous qu'il soit allumé et qu'il accepte les commandes lorsque vous utilisez ce service.",
-                        "updateDeviceName": "Définissez un nom personnalisé pour ce périphérique dans le registre de périphériques."
+                        "updateDeviceName": "Définissez un nom personnalisé pour ce périphérique dans le registre de périphériques.",
+                        "remove": "Supprimer un appareil du réseau ZigBee."
+                    },
+                    "device_card": {
+                        "device_name_placeholder": "Nom d'utilisateur",
+                        "area_picker_label": "Pièce",
+                        "update_name_button": "Mettre à jour le nom"
+                    },
+                    "add_device_page": {
+                        "header": "Zigbee Home Automation - Ajout de périphériques",
+                        "spinner": "Recherche de périphériques ZHA Zigbee ...",
+                        "discovery_text": "Les appareils découverts apparaîtront ici. Suivez les instructions pour votre \/ vos appareil(s) et placez-le(s) en mode de couplage."
                     }
                 },
                 "area_registry": {

translations/hu.json

@@ -279,7 +279,9 @@
     "state_badge": {
         "default": {
             "unknown": "Ism",
-            "unavailable": "N.elér"
+            "unavailable": "N.elér",
+            "error": "Hiba",
+            "entity_not_found": "Entitás nem található"
         },
         "alarm_control_panel": {
             "armed": "Éles",
@@ -607,7 +609,18 @@
                     "description": "Zigbee Home Automation hálózat menedzsment",
                     "services": {
                         "reconfigure": "A ZHA készülék újratelepítése (eszköz rendbehozatala). Ezt a funkciót használd, ha problémáid vannak a készülékkel. Ha a kérdéses eszköz akkumulátoros, győződj meg róla, hogy nincs alvó állapotban és fogadja a parancsokat, amikor ezt a szolgáltatást használod.",
-                        "updateDeviceName": "Egyedi név beállítása ehhez az eszközhöz az eszköz nyilvántartásban"
+                        "updateDeviceName": "Egyedi név beállítása ehhez az eszközhöz az eszköz nyilvántartásban",
+                        "remove": "Eszköz eltávolítása a Zigbee hálózatból"
+                    },
+                    "device_card": {
+                        "device_name_placeholder": "Felhasználónév",
+                        "area_picker_label": "Terület",
+                        "update_name_button": "Név frissítése"
+                    },
+                    "add_device_page": {
+                        "header": "Zigbee Home Automation - Eszközök hozzáadása",
+                        "spinner": "ZHA Zigbee eszközök keresése...",
+                        "discovery_text": "A felfedezett eszközök itt fognak megjelenni. A készülékek használati utasításai alapján állítsd őket párosítási módba."
                     }
                 },
                 "area_registry": {

translations/is.json

@@ -6,6 +6,936 @@
         "logbook": "Logbók",
         "history": "Saga",
         "mailbox": "Pósthólf",
-        "shopping_list": "Innkaupalisti"
+        "shopping_list": "Innkaupalisti",
+        "dev-services": "Þjónustur",
+        "dev-states": "Stöður",
+        "dev-events": "Viðburðir",
+        "dev-mqtt": "MQTT",
+        "dev-info": "Upplýsingar",
+        "calendar": "Dagatal",
+        "profile": "Prófíll"
+    },
+    "state": {
+        "default": {
+            "off": "Af",
+            "on": "Á",
+            "unknown": "Óþekkt",
+            "unavailable": "Ekki tiltækt"
+        },
+        "binary_sensor": {
+            "moisture": {
+                "off": "Þurrt",
+                "on": "Blautt"
+            },
+            "gas": {
+                "off": "Hreinsa",
+                "on": "Uppgötvað"
+            },
+            "motion": {
+                "off": "Hreinsa",
+                "on": "Uppgötvað"
+            },
+            "occupancy": {
+                "off": "Hreinsa",
+                "on": "Uppgötvað"
+            },
+            "smoke": {
+                "off": "Hreinsa",
+                "on": "Uppgötvað"
+            },
+            "sound": {
+                "off": "Hreinsa",
+                "on": "Uppgötvað"
+            },
+            "safety": {
+                "off": "Öruggt",
+                "on": "Óöruggt"
+            },
+            "presence": {
+                "off": "Fjarverandi",
+                "on": "Heima"
+            },
+            "battery": {
+                "off": "Venjulegt",
+                "on": "Lágt"
+            },
+            "problem": {
+                "off": "Í lagi",
+                "on": "Vandamál"
+            },
+            "connectivity": {
+                "off": "Aftengdur",
+                "on": "Tengdur"
+            },
+            "door": {
+                "off": "Lokuð",
+                "on": "Opin"
+            },
+            "garage_door": {
+                "off": "Lokuð",
+                "on": "Opin"
+            },
+            "window": {
+                "off": "Loka",
+                "on": "Opna"
+            },
+            "lock": {
+                "off": "Læst",
+                "on": "Aflæst"
+            }
+        },
+        "camera": {
+            "recording": "Í upptöku",
+            "streaming": "Streymi",
+            "idle": "Aðgerðalaus"
+        },
+        "climate": {
+            "heat": "Hitun",
+            "cool": "Kæling",
+            "idle": "Aðgerðalaus",
+            "auto": "Sjálfvirkt",
+            "dry": "Þurrt",
+            "fan_only": "Vifta eingöngu",
+            "eco": "Sparnaður",
+            "heat_pump": "Hitadæla",
+            "gas": "Gas",
+            "manual": "Handvirkt"
+        },
+        "device_tracker": {
+            "home": "Heima",
+            "not_home": "Fjarverandi"
+        },
+        "group": {
+            "home": "Heima",
+            "not_home": "Fjarverandi",
+            "closing": "Loka",
+            "stopped": "Stöðvað",
+            "locked": "Læst",
+            "unlocked": "Aflæst",
+            "ok": "Í lagi",
+            "problem": "Vandamál"
+        },
+        "input_boolean": {
+            "off": "Af",
+            "on": "Á"
+        },
+        "light": {
+            "off": "Slökkt",
+            "on": "Kveikt"
+        },
+        "lock": {
+            "locked": "Læst",
+            "unlocked": "Aflæst"
+        },
+        "media_player": {
+            "off": "Slökkt",
+            "on": "í gangi",
+            "playing": "Spila",
+            "paused": "Í bið",
+            "idle": "Aðgerðalaus",
+            "standby": "Biðstaða"
+        },
+        "plant": {
+            "ok": "Í lagi",
+            "problem": "Vandamál"
+        },
+        "sensor": {
+            "off": "Af",
+            "on": "Á"
+        },
+        "sun": {
+            "above_horizon": "Yfir sjóndeildarhring",
+            "below_horizon": "Undir sjóndeildarhring"
+        },
+        "switch": {
+            "off": "Slökkt",
+            "on": "Kveikt"
+        },
+        "zwave": {
+            "default": {
+                "initializing": "Frumstilli",
+                "dead": "Dauður",
+                "sleeping": "Í dvala",
+                "ready": "Tilbúinn"
+            },
+            "query_stage": {
+                "initializing": "Frumstilli ({query_stage})",
+                "dead": "Dauður ({query_stage})"
+            }
+        },
+        "weather": {
+            "cloudy": "Skýjað",
+            "fog": "Þoka",
+            "hail": "Haglél",
+            "lightning": "Eldingar",
+            "pouring": "Úrhelli",
+            "rainy": "Rigning",
+            "snowy": "Snjókoma",
+            "snowy-rainy": "Slydda",
+            "windy": "Vindasamt",
+            "windy-variant": "Vindasamt"
+        },
+        "vacuum": {
+            "error": "Villa",
+            "idle": "Aðgerðalaus",
+            "off": "Slökkt",
+            "on": "Í gangi",
+            "paused": "Í bið"
+        },
+        "timer": {
+            "active": "virkur",
+            "idle": "aðgerðalaus",
+            "paused": "í bið"
+        },
+        "person": {
+            "home": "Heima",
+            "not_home": "Fjarverandi"
+        }
+    },
+    "state_badge": {
+        "device_tracker": {
+            "home": "Heima",
+            "not_home": "Fjarverandi"
+        },
+        "person": {
+            "home": "Heima",
+            "not_home": "Fjarverandi"
+        },
+        "default": {
+            "error": "Villa"
+        }
+    },
+    "ui": {
+        "panel": {
+            "shopping-list": {
+                "clear_completed": "Hreinsa lokið",
+                "add_item": "Bæta við hlut",
+                "microphone_tip": "Ýttu á hljóðnemann efst til hægri og segðu \"Add candy to my shopping list\""
+            },
+            "history": {
+                "showing_entries": "Sýni færslur fyrir",
+                "period": "Tímabil"
+            },
+            "logbook": {
+                "showing_entries": "Sýni færslur fyrir",
+                "period": "Tímabil"
+            },
+            "mailbox": {
+                "empty": "Þú hefur engin skilaboð",
+                "playback_title": "Afspilun skilaboða",
+                "delete_prompt": "Eyða þessum skilaboðum?",
+                "delete_button": "Eyða"
+            },
+            "config": {
+                "header": "Stilla af Home Assistant",
+                "core": {
+                    "caption": "Almennt",
+                    "description": "Staðfesta að stillingarskráin þín sé rétt og stjórnun á miðlara",
+                    "section": {
+                        "core": {
+                            "validation": {
+                                "check_config": "Athuga stillingar",
+                                "valid": "Stillingar í lagi!",
+                                "invalid": "Stillingar ógildar"
+                            },
+                            "reloading": {
+                                "heading": "Endurhleðsla stillinga",
+                                "core": "Endurhlaða inn kjarna",
+                                "group": "Endurhlaða inn hópum",
+                                "automation": "Endurhlaða inn sjálfvirkni"
+                            },
+                            "server_management": {
+                                "heading": "Stjórnun miðlara",
+                                "introduction": "Stjórna Home Assistant miðlara... frá Home Assistant.",
+                                "restart": "Endurræsa",
+                                "stop": "Stöðva"
+                            }
+                        }
+                    }
+                },
+                "customize": {
+                    "caption": "Séraðlögun",
+                    "picker": {
+                        "header": "Séraðlögun"
+                    }
+                },
+                "automation": {
+                    "caption": "Sjálfvirkni",
+                    "description": "Stofna og breyta sjálfvirkni",
+                    "picker": {
+                        "pick_automation": "Veldu sjálfvirkni sem á að breyta",
+                        "add_automation": "Bæta við sjálfvirkni",
+                        "learn_more": "Læra meira um sjálfvirkni"
+                    },
+                    "editor": {
+                        "introduction": "Notaðu sjálfvirkni til að glæða húsið þitt lífi",
+                        "default_name": "Ný sjálfvirkni",
+                        "save": "Vista",
+                        "unsaved_confirm": "Þú ert með óvistaðar breytingar. Ertu viss um að þú viljir fara?",
+                        "alias": "Nafn",
+                        "triggers": {
+                            "duplicate": "Fjölfalda",
+                            "delete": "Eyða",
+                            "delete_confirm": "Ert þú viss um að þú viljir eyða?",
+                            "unsupported_platform": "Vettvangur ekki studdur: {platform}",
+                            "type": {
+                                "event": {
+                                    "label": "Viðburður",
+                                    "event_type": "Gerð viðburðar",
+                                    "event_data": "Viðburðargögn"
+                                },
+                                "state": {
+                                    "label": "Staða",
+                                    "from": "Frá",
+                                    "to": "Til",
+                                    "for": "Fyrir"
+                                },
+                                "homeassistant": {
+                                    "label": "Home Assistant",
+                                    "event": "Viðburður:",
+                                    "start": "Ræsing",
+                                    "shutdown": "Lokun"
+                                },
+                                "mqtt": {
+                                    "label": "MQTT"
+                                },
+                                "sun": {
+                                    "label": "Sól",
+                                    "event": "Viðburður:",
+                                    "sunrise": "Sólarupprás",
+                                    "sunset": "Sólsetur"
+                                },
+                                "time": {
+                                    "label": "Tími",
+                                    "at": "Þann"
+                                },
+                                "zone": {
+                                    "entity": "Eining með staðsetningu",
+                                    "event": "Viðburður:",
+                                    "enter": "Koma",
+                                    "leave": "Brottför"
+                                },
+                                "webhook": {
+                                    "label": "Vefkrókur",
+                                    "webhook_id": "Vefkrókur ID"
+                                },
+                                "time_pattern": {
+                                    "label": "Tímamynstur",
+                                    "hours": "Klukkustundir",
+                                    "minutes": "Mínútur",
+                                    "seconds": "Sekúndur"
+                                },
+                                "geo_location": {
+                                    "source": "Uppruni",
+                                    "event": "Viðburður:",
+                                    "enter": "Koma",
+                                    "leave": "Brottför"
+                                }
+                            }
+                        },
+                        "conditions": {
+                            "header": "Skilyrði",
+                            "add": "Bæta við skilyrði",
+                            "duplicate": "Fjölfalda",
+                            "delete": "Eyða",
+                            "delete_confirm": "Ertu viss um að þú viljir eyða?",
+                            "unsupported_condition": "Skilyrði ekki stutt: {condition}",
+                            "type_select": "Gerð skilyrðis",
+                            "type": {
+                                "state": {
+                                    "label": "Staða",
+                                    "state": "Staða"
+                                },
+                                "sun": {
+                                    "label": "Sól",
+                                    "before": "Fyrir:",
+                                    "after": "Eftir:",
+                                    "sunrise": "Sólarupprás",
+                                    "sunset": "Sólsetur"
+                                },
+                                "time": {
+                                    "label": "Tími",
+                                    "after": "Eftir",
+                                    "before": "Fyrir"
+                                },
+                                "zone": {
+                                    "entity": "Eining með staðsetningu"
+                                }
+                            },
+                            "learn_more": "Læra meira um skilyrði"
+                        },
+                        "actions": {
+                            "header": "Aðgerðir",
+                            "introduction": "Aðgerðir er það sem Home Assistant mun gera þegar sjálfvirkni er ræst.",
+                            "add": "Bæta við aðgerð",
+                            "duplicate": "Fjölfalda",
+                            "delete": "Eyða",
+                            "delete_confirm": "Ertu viss um að þú viljir eyða?",
+                            "unsupported_action": "Óstudd aðgerð: {action}",
+                            "type_select": "Gerð aðgerðar",
+                            "type": {
+                                "service": {
+                                    "label": "Kalla í þjónustu",
+                                    "service_data": "Þjónustugögn"
+                                },
+                                "delay": {
+                                    "label": "Töf",
+                                    "delay": "Töf"
+                                },
+                                "wait_template": {
+                                    "label": "Bið"
+                                },
+                                "condition": {
+                                    "label": "Skilyrði"
+                                },
+                                "event": {
+                                    "service_data": "Þjónustu gögn"
+                                }
+                            },
+                            "learn_more": "Læra meira um aðgerðir"
+                        }
+                    }
+                },
+                "zwave": {
+                    "caption": "Z-Wave",
+                    "description": "Stjórnaðu Z-Wave netinu þínu"
+                },
+                "users": {
+                    "caption": "Notendur",
+                    "description": "Stjórna notendum",
+                    "picker": {
+                        "title": "Notendur"
+                    },
+                    "editor": {
+                        "rename_user": "Endurnefna notanda",
+                        "change_password": "Breyta lykilorði",
+                        "activate_user": "Virkja notanda",
+                        "deactivate_user": "Gera notanda óvirkan",
+                        "delete_user": "Eyða notanda",
+                        "caption": "Skoða notanda"
+                    },
+                    "add_user": {
+                        "caption": "Bæta við notanda",
+                        "name": "Nafn",
+                        "username": "Notandanafn",
+                        "password": "Lykilorð",
+                        "create": "Stofna"
+                    }
+                },
+                "cloud": {
+                    "caption": "Home Assistant skýið",
+                    "description_login": "Innskráð(ur) sem {email}",
+                    "description_not_login": "Ekki skráð(ur) inn"
+                },
+                "integrations": {
+                    "caption": "Samþættingar",
+                    "description": "Stjórna tengdum tækjum og þjónustum",
+                    "discovered": "Uppgötvað",
+                    "configured": "Uppsett",
+                    "new": "Setja upp nýja samþættingu",
+                    "configure": "Stilla",
+                    "none": "Ekkert skilgreint sem stendur",
+                    "config_entry": {
+                        "no_devices": "Þessi samþætting hefur engin tæki.",
+                        "no_device": "Einingar án tækja",
+                        "delete_confirm": "Ertu viss um að þú viljir eyða þessari samþættingu?",
+                        "restart_confirm": "Endurræsa Home Assitant til að klára að fjarlægja þessa samþættingu",
+                        "manuf": "eftir {manufacturer}",
+                        "hub": "Tengt gegnum",
+                        "firmware": "Fastbúnaðarútgáfa: {version}",
+                        "device_unavailable": "Tæki ekki tiltækt",
+                        "entity_unavailable": "Eining ekki tiltæk"
+                    }
+                },
+                "zha": {
+                    "caption": "ZHA",
+                    "description": "Zigbee Home Automation net stjórnun",
+                    "services": {
+                        "updateDeviceName": "Stilltu sérsniðið heiti fyrir þetta tæki í tækjaskránni.",
+                        "remove": "Fjarlægja tæki af ZigBee neti."
+                    },
+                    "device_card": {
+                        "device_name_placeholder": "Nafn notanda",
+                        "update_name_button": "Uppfæra nafn"
+                    },
+                    "add_device_page": {
+                        "header": "Zigbee sjálfvirkni - Bæta við tækjum",
+                        "spinner": "Leitað að ZHA Zigbee tækjum...",
+                        "discovery_text": "Uppgötvuð tæki munu birtast hér. Fylgdu leiðbeiningunum fyrir tækið þitt og setjið tækið í pörunarstillingu."
+                    }
+                },
+                "area_registry": {
+                    "description": "Yfirlit yfir öll svæði á heimilinu þínu.",
+                    "editor": {
+                        "delete": "EYÐA",
+                        "update": "UPPFÆRA",
+                        "create": "STOFNA"
+                    },
+                    "picker": {
+                        "integrations_page": "Samþættingar síða"
+                    }
+                },
+                "entity_registry": {
+                    "caption": "Einingarskrá",
+                    "description": "Yfirlit yfir allar þekktar einingar.",
+                    "picker": {
+                        "header": "Einingarskrá",
+                        "unavailable": "(ekki tiltækt)",
+                        "integrations_page": "Samþættingar síða"
+                    },
+                    "editor": {
+                        "unavailable": "Þessi eining er ekki tiltæk eins og er.",
+                        "delete": "EYÐA",
+                        "update": "UPPFÆRA"
+                    }
+                },
+                "person": {
+                    "caption": "Persónur",
+                    "description": "Stjórna persónum sem Home assistand er að rekja.",
+                    "detail": {
+                        "name": "Nafn",
+                        "device_tracker_intro": "Veldu tæki sem tilheyrir þessari persónu.",
+                        "device_tracker_picked": "Rekja tæki",
+                        "device_tracker_pick": "Velja tæki til að rekja"
+                    }
+                }
+            },
+            "profile": {
+                "push_notifications": {
+                    "description": "Senda tilkynningar í þetta tæki.",
+                    "error_load_platform": "Stilla notify.html5.",
+                    "error_use_https": "Krefst þess að SSL sé virkt á vef.",
+                    "push_notifications": "Ýta út tilkynningum",
+                    "link_promo": "Læra meira"
+                },
+                "language": {
+                    "header": "Tungumál",
+                    "link_promo": "Hjálpa við að þýða",
+                    "dropdown_label": "Tungumál"
+                },
+                "themes": {
+                    "header": "Þema",
+                    "error_no_theme": "Engar þemu í boði.",
+                    "link_promo": "Lærðu um þemu",
+                    "dropdown_label": "Þema"
+                },
+                "refresh_tokens": {
+                    "created_at": "Búið til þann {date}",
+                    "last_used": "Síðast notaður þann {date} frá {location}",
+                    "not_used": "Hefur aldrei verið notaður"
+                },
+                "long_lived_access_tokens": {
+                    "learn_auth_requests": "Lærðu hvernig á að útbúa auðkenndar beiðnir.",
+                    "created_at": "Búið til þann {date}",
+                    "prompt_name": "Nafn?",
+                    "last_used": "Síðast notaður þann {date} frá {location}",
+                    "not_used": "Hefur aldrei verið notaður"
+                },
+                "current_user": "Þú ert skráð(ur) inn sem {fullName}.",
+                "is_owner": "Þú ert eigandi.",
+                "logout": "Skrá út",
+                "change_password": {
+                    "header": "Breyta lykilorði",
+                    "current_password": "Núverandi lykilorð",
+                    "new_password": "Nýtt lykilorð",
+                    "confirm_new_password": "Staðfesta nýtt lykilorð",
+                    "error_required": "Skilyrt",
+                    "submit": "Senda"
+                },
+                "mfa": {
+                    "header": "Fjölþátta auðkenningareiningar",
+                    "disable": "Afvirkja",
+                    "enable": "Virkja",
+                    "confirm_disable": "Ertu viss um að þú viljir afvirkja {name} ?"
+                },
+                "mfa_setup": {
+                    "title_aborted": "Hætt var við",
+                    "title_success": "Tókst!",
+                    "step_done": "Uppsetningu lokið fyrir {step}",
+                    "close": "Loka",
+                    "submit": "Senda"
+                }
+            },
+            "page-authorize": {
+                "initializing": "Frumstilli",
+                "logging_in_with": "Skrái inn með ** {authProviderName} **.",
+                "pick_auth_provider": "Eða skráðu þig inn með",
+                "abort_intro": "Hætt var við innskráningu",
+                "form": {
+                    "working": "Vinsamlegast bíðið",
+                    "unknown_error": "Eitthvað fór úrskeiðis",
+                    "providers": {
+                        "homeassistant": {
+                            "step": {
+                                "init": {
+                                    "data": {
+                                        "username": "Notandanafn",
+                                        "password": "Lykilorð"
+                                    }
+                                },
+                                "mfa": {
+                                    "data": {
+                                        "code": "Tvíþættur auðkenningarkóði"
+                                    }
+                                }
+                            },
+                            "error": {
+                                "invalid_auth": "Ógilt notandanafn eða lykilorð",
+                                "invalid_code": "Ógildur auðkenningarkóði"
+                            },
+                            "abort": {
+                                "login_expired": "Lota er útrunninn, vinsamlegast skráðu þig inn aftur."
+                            }
+                        },
+                        "legacy_api_password": {
+                            "step": {
+                                "init": {
+                                    "data": {
+                                        "password": "API lykilorð"
+                                    }
+                                },
+                                "mfa": {
+                                    "data": {
+                                        "code": "Tví-þátta auðkenningarkóði"
+                                    }
+                                }
+                            },
+                            "error": {
+                                "invalid_auth": "Ógilt API lykilorð",
+                                "invalid_code": "Ógildur auðkenningarkóði"
+                            }
+                        },
+                        "trusted_networks": {
+                            "step": {
+                                "init": {
+                                    "data": {
+                                        "user": "Notandi"
+                                    },
+                                    "description": "Vinsamlegast veldu notanda sem þú vilt skrá þig inn með:"
+                                }
+                            },
+                            "abort": {
+                                "not_whitelisted": "Tölvan þín er ekki hvítlistuð."
+                            }
+                        },
+                        "command_line": {
+                            "step": {
+                                "init": {
+                                    "data": {
+                                        "username": "Notandanafn",
+                                        "password": "Lykilorð"
+                                    }
+                                },
+                                "mfa": {
+                                    "data": {
+                                        "code": "Tví-þátta auðkenning"
+                                    }
+                                }
+                            },
+                            "error": {
+                                "invalid_auth": "Ógilt notandanafn eða lykilorð",
+                                "invalid_code": "Ógildur auðkenningarkóði"
+                            },
+                            "abort": {
+                                "login_expired": "Útrunnin lota, vinsamlegast skráðu þig inn á ný."
+                            }
+                        }
+                    }
+                }
+            },
+            "page-onboarding": {
+                "user": {
+                    "intro": "Hefjumst handa með því að byrja á að stona notanda aðgang.",
+                    "required_field": "Skilyrt",
+                    "data": {
+                        "name": "Nafn",
+                        "username": "Notandanafn",
+                        "password": "Lykilorð",
+                        "password_confirm": "Staðfesta lykilorð"
+                    },
+                    "create_account": "Stofna aðgang",
+                    "error": {
+                        "required_fields": "Fylltu út í alla nauðsynlega reiti",
+                        "password_not_match": "Lykilorð passa ekki saman"
+                    }
+                }
+            },
+            "lovelace": {
+                "cards": {
+                    "shopping-list": {
+                        "checked_items": "Valdir hlutir",
+                        "clear_items": "Hreinsa valda hluti",
+                        "add_item": "Bæta við hlut"
+                    },
+                    "empty_state": {
+                        "title": "Velkomin(n) heim",
+                        "go_to_integrations_page": "Fara á samþættingar síðu."
+                    }
+                },
+                "editor": {
+                    "edit_card": {
+                        "header": "Stillingar spjalds",
+                        "save": "Vista",
+                        "toggle_editor": "Víxla ritli",
+                        "pick_card": "Veldu spjald sem þú vilt bæta við.",
+                        "add": "Bæta við spjaldi",
+                        "edit": "Breyta",
+                        "delete": "Eyða",
+                        "move": "Færa"
+                    },
+                    "migrate": {
+                        "header": "Ósamhæfðar stillingar"
+                    },
+                    "header": "Breyta notendaviðmóti",
+                    "edit_view": {
+                        "header": "Skoða stillingar",
+                        "add": "Bæta við sýn",
+                        "edit": "Breyta sýn",
+                        "delete": "Eyða sýn"
+                    },
+                    "save_config": {
+                        "header": "Taka yfir stjórn á Lovelace viðmótinu",
+                        "para_sure": "Ertu viss um að þú viljir taka yfir stjórn á notendaviðmótinu þínu?",
+                        "cancel": "Gleymdu þessu",
+                        "save": "Taka stjórnina"
+                    },
+                    "raw_editor": {
+                        "header": "Breyta stillingum",
+                        "save": "Vista",
+                        "unsaved_changes": "Óvistaðar breytingar",
+                        "saved": "Vistað"
+                    }
+                },
+                "menu": {
+                    "configure_ui": "Stilla notendaviðmót",
+                    "unused_entities": "Ónýttar einingar",
+                    "help": "Hjálp",
+                    "refresh": "Endurnýja"
+                },
+                "warning": {
+                    "entity_not_found": "Eining ekki tiltæk: {entity}"
+                }
+            }
+        },
+        "sidebar": {
+            "log_out": "Skrá út"
+        },
+        "common": {
+            "loading": "Hleð",
+            "cancel": "Hætta við",
+            "save": "Vista"
+        },
+        "duration": {
+            "day": "{count} {count, plural,\n  one {dagur}\n  other {dagar}\n}",
+            "week": "{count} {count, plural,\n  one {vika}\n  other {vikur}\n}",
+            "second": "{count} {count, plural,\n  one {sekúnda}\n  other {sekúndur}\n}",
+            "minute": "{count} {count, plural,\n  one {mínúta}\n  other {mínútur}\n}",
+            "hour": "{count} {count, plural,\n  one {klukkutími}\n  other {klukkutímar}\n}"
+        },
+        "login-form": {
+            "password": "Lykilorð",
+            "remember": "Muna",
+            "log_in": "Skrá inn"
+        },
+        "card": {
+            "camera": {
+                "not_available": "Mynd ekki tiltæk"
+            },
+            "persistent_notification": {
+                "dismiss": "Hafna"
+            },
+            "scene": {
+                "activate": "Virkja"
+            },
+            "script": {
+                "execute": "Framkvæma"
+            },
+            "weather": {
+                "attributes": {
+                    "air_pressure": "Loftþrýstingur",
+                    "humidity": "Rakastig",
+                    "temperature": "Hitastig",
+                    "visibility": "Skyggni",
+                    "wind_speed": "Vindhraði"
+                },
+                "cardinal_direction": {
+                    "e": "A",
+                    "ene": "ANA",
+                    "ese": "ASA",
+                    "n": "N",
+                    "ne": "NA",
+                    "nne": "NNA",
+                    "nw": "NV",
+                    "nnw": "NNV",
+                    "s": "S",
+                    "se": "SA",
+                    "sse": "SSA",
+                    "ssw": "SSV",
+                    "sw": "SV",
+                    "w": "V",
+                    "wnw": "VNV",
+                    "wsw": "VSV"
+                },
+                "forecast": "Spá"
+            },
+            "alarm_control_panel": {
+                "code": "Kóði",
+                "clear_code": "Hreinsa"
+            },
+            "cover": {
+                "position": "Staðsetning"
+            },
+            "fan": {
+                "speed": "Hraði",
+                "direction": "Snúningsátt"
+            },
+            "light": {
+                "brightness": "Birtustig",
+                "color_temperature": "Litastig",
+                "white_value": "Hvítt gildi"
+            },
+            "media_player": {
+                "text_to_speak": "Texti yfir í tal",
+                "source": "Uppruni",
+                "sound_mode": "Hljóðhamur"
+            },
+            "climate": {
+                "currently": "Er núna",
+                "on_off": "Kveikt \/ slökkt",
+                "operation": "Aðgerð",
+                "swing_mode": "Sveifluhamur"
+            },
+            "lock": {
+                "code": "Kóði",
+                "lock": "Læsa",
+                "unlock": "Aflæsa"
+            },
+            "vacuum": {
+                "actions": {
+                    "resume_cleaning": "Halda áfram að þrífa",
+                    "return_to_base": "Fara aftur í bryggju",
+                    "start_cleaning": "Byrja að þrífa",
+                    "turn_on": "Kveikja á",
+                    "turn_off": "Slökkva á"
+                }
+            },
+            "water_heater": {
+                "currently": "Er núna",
+                "on_off": "Kveikt \/ slökkt",
+                "target_temperature": "Viðmiðunarhitastig",
+                "operation": "Aðgerð"
+            }
+        },
+        "components": {
+            "entity": {
+                "entity-picker": {
+                    "entity": "Eining"
+                }
+            },
+            "service-picker": {
+                "service": "Þjónusta"
+            },
+            "relative_time": {
+                "past": "{time} síðan",
+                "future": "Eftir {time}",
+                "never": "Aldrei",
+                "duration": {
+                    "second": "{count} {count, plural,\n  one {sekúnda}\n  other {sekúndur}\n}",
+                    "minute": "{count} {count, plural,\n  one {mínúta}\n  other {mínútur}\n}",
+                    "hour": "{count} {count, plural,\n  one {klukkutími}\n  other {klukkutímar}\n}",
+                    "day": "{count} {count, plural,\n  one {dagur}\n  other {dagar}\n}",
+                    "week": "{count} {count, plural,\n  one {vika}\n  other {vikur}\n}"
+                }
+            },
+            "history_charts": {
+                "loading_history": "Hleð stöðusögu...",
+                "no_history_found": "Engin stöðusaga fannst."
+            }
+        },
+        "notification_toast": {
+            "entity_turned_on": "Kveikti á {entity} .",
+            "entity_turned_off": "Slökkti á {entity} .",
+            "service_called": "Kallað var á {service} þjónustuna.",
+            "service_call_failed": "Ekki tókst að kalla á þjónustu {service}.",
+            "connection_lost": "Tenging tapaðist. Tengist aftur..."
+        },
+        "dialogs": {
+            "more_info_settings": {
+                "save": "Vista",
+                "name": "Yfirskrifa nafn"
+            },
+            "more_info_control": {
+                "script": {
+                    "last_action": "Síðasta aðgerð"
+                },
+                "sun": {
+                    "elevation": "Hækkun",
+                    "rising": "Upprisa",
+                    "setting": "Stillingar"
+                },
+                "updater": {
+                    "title": "Uppfærslu leiðbeiningar"
+                }
+            }
+        },
+        "auth_store": {
+            "ask": "Viltu vista þessa innskráningu?",
+            "decline": "Nei takk",
+            "confirm": "Vista innskráningu"
+        },
+        "notification_drawer": {
+            "empty": "Engar tilkynningar",
+            "title": "Tilkynningar"
+        }
+    },
+    "domain": {
+        "automation": "Sjálfvirkni",
+        "calendar": "Dagatal",
+        "camera": "Myndavél",
+        "configurator": "Stillingarálfur",
+        "conversation": "Samtal",
+        "cover": "Gluggatjöld",
+        "fan": "Vifta",
+        "group": "Hópur",
+        "light": "Ljós",
+        "lock": "Lás",
+        "mailbox": "Pósthólf",
+        "media_player": "Margmiðlunarspilari",
+        "notify": "Tilkynna",
+        "plant": "Planta",
+        "proximity": "Nálægð",
+        "scene": "Sena",
+        "sensor": "Skynjari",
+        "sun": "Sól",
+        "switch": "Rofi",
+        "weblink": "Vefslóð",
+        "zwave": "Z-Wave",
+        "zha": "ZHA",
+        "hassio": "Hass.io",
+        "homeassistant": "Home Assistant",
+        "lovelace": "Lovelace",
+        "system_health": "Heilbrigði kerfis",
+        "person": "Persóna"
+    },
+    "attribute": {
+        "weather": {
+            "humidity": "Rakastig",
+            "visibility": "Skyggni",
+            "wind_speed": "Vindhraði"
+        }
+    },
+    "state_attributes": {
+        "climate": {
+            "fan_mode": {
+                "off": "Slökkt",
+                "on": "Kveikt",
+                "auto": "Sjálfvirkt"
+            }
+        }
+    },
+    "groups": {
+        "system-admin": "Stjórnendur",
+        "system-users": "Notendur",
+        "system-read-only": "Notendur með lesaðgang"
     }
 }

translations/ko.json

@@ -592,10 +592,10 @@
                     "configure": "설정하기",
                     "none": "설정된 구성요소가 없습니다",
                     "config_entry": {
-                        "no_devices": "이 통합 구성요소는 설정해야 할 장치가 없습니다.",
+                        "no_devices": "이 통합 구성요소는 설정해야 할 기기가 없습니다.",
-                        "no_device": "장치가 없는 구성요소",
+                        "no_device": "기기가 없는 구성요소",
                         "delete_confirm": "이 통합 구성요소를 제거 하시겠습니까?",
-                        "restart_confirm": "통합 구성요소 제거 완료를 위해 Home Assistant 를 재시작합니다",
+                        "restart_confirm": "통합 구성요소 제거 완료를 위해 Home Assistant 웹 페이지를 다시 불러옵니다",
                         "manuf": "{manufacturer} 제조",
                         "hub": "연결 경유 대상",
                         "firmware": "펌웨어: {version}",
@@ -608,9 +608,9 @@
                     "caption": "ZHA",
                     "description": "Zigbee 홈 자동화 네트워크 관리",
                     "services": {
-                        "reconfigure": "ZHA 장치를 다시 구성 합니다. (장치 복구). 장치에 문제가 있는 경우 사용해주세요. 장치가 배터리로 작동하는 경우, 이 서비스를 사용할 때 장치가 켜져있고 통신이 가능한 상태인지 확인해주세요.",
+                        "reconfigure": "ZHA 기기를 다시 구성 합니다. (장치 복구). 기기에 문제가 있는 경우 사용해주세요. 기기가 배터리로 작동하는 경우, 이 서비스를 사용할 때 기기가 켜져있고 통신이 가능한 상태인지 확인해주세요.",
-                        "updateDeviceName": "이 장치의 사용자 정의 이름을 장치 레지스트리에 설정합니다.",
+                        "updateDeviceName": "이 기기의 사용자 정의 이름을 장치 레지스트리에 설정합니다.",
-                        "remove": "ZigBee 네트워크에서 기기 제거"
+                        "remove": "Zigbee 네트워크에서 기기 제거"
                     },
                     "device_card": {
                         "device_name_placeholder": "사용자 지정 이름",
@@ -628,8 +628,8 @@
                     "description": "영역을 만들고 편집합니다",
                     "picker": {
                         "header": "영역 등록",
-                        "introduction": "영역은 장치가있는 위치를 구성하는데 사용합니다. 이 정보는 Home Assistant 의 인터페이스 정리, 권한 및 다른 시스템과의 통합 구성에 도움을 줍니다.",
+                        "introduction": "영역은 기기가있는 위치를 구성하는데 사용합니다. 이 정보는 Home Assistant 의 인터페이스 정리, 권한 및 다른 시스템과의 통합 구성에 도움을 줍니다.",
-                        "introduction2": "특정 영역에 장치를 배치하려면 아래 링크를 따라 통합 구성요소 페이지로 이동 한 다음, 설정된 구성요소의 장치를 클릭하여 영역을 설정 할 수 있습니다.",
+                        "introduction2": "특정 영역에 기기를 배치하려면 아래 링크를 따라 통합 구성요소 페이지로 이동 한 다음, 설정된 구성요소의 기기를 클릭하여 영역을 설정 할 수 있습니다.",
                         "integrations_page": "통합 구성요소 페이지",
                         "no_areas": "등록된 영역이 없습니다. 거실, 침실과 같이 영역을 등록해보세요!",
                         "create_area": "영역 만들기"
@@ -666,7 +666,7 @@
                     "detail": {
                         "name": "이름",
                         "device_tracker_intro": "이 구성원에게 속한 장치를 선택해주세요.",
-                        "device_tracker_picked": "추적 장치",
+                        "device_tracker_picked": "장치 추적 대상",
                         "device_tracker_pick": "추적 할 장치 선택"
                     }
                 }
@@ -865,7 +865,7 @@
                     },
                     "empty_state": {
                         "title": "집에 오신 것을 환영합니다",
-                        "no_devices": "이 페이지에서 장치를 제어 할 수 있지만, 장치가 아직 설정되지 않은 것 같습니다. 시작하려면 통합 페이지로 이동해주세요.",
+                        "no_devices": "이 페이지에서 기기를 제어 할 수 있지만, 기기가 아직 설정되지 않은 것 같습니다. 시작하려면 통합 페이지로 이동해주세요.",
                         "go_to_integrations_page": "통합 페이지로 이동하기."
                     }
                 },
@@ -1121,11 +1121,11 @@
         "binary_sensor": "이진센서",
         "calendar": "일정",
         "camera": "카메라",
-        "climate": "공조장치",
+        "climate": "공조기기",
         "configurator": "구성",
         "conversation": "대화",
         "cover": "여닫이",
-        "device_tracker": "추적장치",
+        "device_tracker": "추적 장치",
         "fan": "송풍기",
         "history_graph": "기록그래프",
         "group": "그룹",

translations/lb.json

@@ -259,7 +259,7 @@
         "vacuum": {
             "cleaning": "Botzt",
             "docked": "Agedockt",
-            "error": "Fehler",
+            "error": "Feeler",
             "idle": "Waart",
             "off": "Aus",
             "on": "Un",
@@ -279,14 +279,16 @@
     "state_badge": {
         "default": {
             "unknown": "Onbekannt",
-            "unavailable": "Net Verfügbar"
+            "unavailable": "Net Verfügbar",
+            "error": "Feeler",
+            "entity_not_found": "Entitéit net fonnt"
         },
         "alarm_control_panel": {
             "armed": "Aktivéiert",
             "disarmed": "Desaktivéieren",
-            "armed_home": "Uzbrojony",
+            "armed_home": "Aktivéiert",
-            "armed_away": "Uzbrojony",
+            "armed_away": "Aktivéiert",
-            "armed_night": "Uzbrojony",
+            "armed_night": "Aktivéiert",
             "pending": "Ustoend",
             "arming": "Aktivéieren",
             "disarming": "Desaktivéieren",
@@ -345,7 +347,7 @@
                                 "introduction": "E puer Deeler vum Home Assistant kënne frësch geluede ginn ouni datt een Neistart néideg ass. Klick op nei luede fir di aktuell Konfiguratioun z'entlueden an di nei Konfiguratioun ze lueden.",
                                 "core": "Kär nei lueden",
                                 "group": "Gruppe nei lueden",
-                                "automation": "Automatisme nei lueden",
+                                "automation": "Automatismen nei lueden",
                                 "script": "Skripte nei lueden"
                             },
                             "server_management": {
@@ -366,25 +368,25 @@
                     }
                 },
                 "automation": {
-                    "caption": "Automatisme",
+                    "caption": "Automatismen",
-                    "description": "Automatisme erstellen an änneren",
+                    "description": "Automatismen erstellen an änneren",
                     "picker": {
-                        "header": "Automatisme editéieren",
+                        "header": "Automatismen editéieren",
-                        "introduction": "Den Automatisme Editor erméiglecht et fir Automatismen z'erstellen an ze änneren. Liest w.e.g. [d'Instruktioune](https:\/\/home-assistant.io\/docs\/automation\/editor\/) fir sécher ze stellen dass den Home Assistant richteg agestallt ass.",
+                        "introduction": "Den Automatismen-Editor erméiglecht et fir Automatismen z'erstellen an ze änneren. Lies w.e.g. [d'Instruktioune](https:\/\/home-assistant.io\/docs\/automation\/editor\/) fir sécher ze stellen dass den Home Assistant richteg agestallt ass.",
-                        "pick_automation": "Automatisme fir ze änneren auswielen",
+                        "pick_automation": "Automatismus fir ze änneren auswielen",
-                        "no_automations": "Keen Automatisme fir ze änneren fonnt",
+                        "no_automations": "Keen Automatismus fir ze ännere fonnt",
-                        "add_automation": "Automatisme dobäisetzen",
+                        "add_automation": "Automatismus dobäisetzen",
                         "learn_more": "Méi iwwert Automatioune liesen"
                     },
                     "editor": {
-                        "introduction": "Benotzt Automatismen fir äert Haus zum Liewen ze bréngen",
+                        "introduction": "Benotzt Automatismen fir däin Haus zum Liewen ze bréngen",
-                        "default_name": "Néien Automatisme",
+                        "default_name": "Néien Automatismus",
                         "save": "Späicheren",
                         "unsaved_confirm": "Net gespäichert Ännerungen. Trotzdeem verloossen?",
                         "alias": "Numm",
                         "triggers": {
                             "header": "Ausléiser",
-                            "introduction": "Een Ausléiser start de Prozess vun engem Automatisme. Et ass méiglech méi wéi een Ausléiser fir een Automatisme unzeginn. Wann een Ausléiser start validéiert Home Assistant d'Konditioune an, de Fall gesat, féiert eng Aktioun aus.\n\n[Léier méi iwwert Ausléiser.](https:\/\/home-assistant.io\/docs\/automation\/trigger\/)",
+                            "introduction": "Een Ausléiser start de Prozess vun engem Automatismus. Et ass méiglech méi wéi een Ausléiser fir een Automatismus unzeginn. Wann een Ausléiser start validéiert Home Assistant d'Konditiounen a féiert - de Fall gesat - eng Aktioun aus.\n\n[Léier méi iwwert Ausléiser.](https:\/\/home-assistant.io\/docs\/automation\/trigger\/)",
                             "add": "Ausléiser dobäisetzen",
                             "duplicate": "Replikéieren",
                             "delete": "Läschen",
@@ -466,7 +468,7 @@
                         },
                         "conditions": {
                             "header": "Konditiounen",
-                            "introduction": "Konditioune sinn een optionalen Deel vun engem Automatisme a kënne benotzt gi fir ze bestëmme wann eng Aktioun ausgeféiert gëtt. Konditioune gläichen den Ausléiser mee sinn awer ganz ënnerschiddlech. Een Ausléiser iwwerwaacht d'Evenementer am System, an eng Konditioun iwwerwaacht de Status vum System. Een Ausléiser gesäit wann ee Schalter ugeschalt gëtt. Eng Konditioun gesäit nëmmen op de Schalter un oder aus ass.\n\n[Léier méi iwwer Konditioune.](https:\/\/home-assistant.io\/docs\/scripts\/conditions\/)",
+                            "introduction": "Konditioune sinn een optionalen Deel vun engem Automatismus a kënne benotzt gi fir ze bestëmme wann eng Aktioun ausgeféiert gëtt. Konditioune gläichen den Ausléiser mee sinn awer ganz ënnerschiddlech. Een Ausléiser iwwerwaacht d'Evenementer am System, an eng Konditioun iwwerwaacht de Status vum System. Een Ausléiser gesäit wann ee Schalter ugeschalt gëtt. Eng Konditioun gesäit nëmmen op de Schalter un oder aus ass.\n\n[Léier méi iwwer Konditioune.](https:\/\/home-assistant.io\/docs\/scripts\/conditions\/)",
                             "add": "Konditioun dobäisetzen",
                             "duplicate": "Replikéiere",
                             "delete": "Läschen",
@@ -512,7 +514,7 @@
                         },
                         "actions": {
                             "header": "Aktiounen",
-                            "introduction": "Aktioune déi den Home Assistant ausféiert wann den Automatisme ausgeléist gouf.\n[Léier méi iwwert Aktioune.](https:\/\/home-assistant.io\/docs\/automation\/action\/)",
+                            "introduction": "Aktioune déi den Home Assistant ausféiert wann den Automatismus ausgeléist gouf.\n[Léier méi iwwert Aktiounen.](https:\/\/home-assistant.io\/docs\/automation\/action\/)",
                             "add": "Aktioun dobäisetzen",
                             "duplicate": "Replikéiere",
                             "delete": "Läschen",
@@ -582,7 +584,7 @@
                     "description_not_login": "Net ageloggt"
                 },
                 "integrations": {
-                    "caption": "Integratioune",
+                    "caption": "Integratiounen",
                     "description": "Verwalt verbonnen Apparater an Servicen",
                     "discovered": "Entdeckt",
                     "configured": "Konfiguréiert",
@@ -607,7 +609,18 @@
                     "description": "Gestioun vum Zigbee Home Automation Reseau",
                     "services": {
                         "reconfigure": "ZHA Apparat rekonfiguréieren (Apparat heelen). Benotzt dëst am Fall vu Problemer mam Apparat. Falls den Apparat duerch eng Batterie gespeist gëtt stellt sécher dass en un ass a Befeeler entgéint kann huelen",
-                        "updateDeviceName": "Personaliséiert den Numm fir dësen Apparat an der Iwwersiicht vun den Apparaten."
+                        "updateDeviceName": "Personaliséiert den Numm fir dësen Apparat an der Iwwersiicht vun den Apparaten.",
+                        "remove": "Een Apparat vum Zigbee Reseau läschen."
+                    },
+                    "device_card": {
+                        "device_name_placeholder": "Virnumm",
+                        "area_picker_label": "Beräich",
+                        "update_name_button": "Numm änneren"
+                    },
+                    "add_device_page": {
+                        "header": "Zigbee Home Automation - Apparater dobäisetzen",
+                        "spinner": "Sicht no ZHA Zigbee Apparater...",
+                        "discovery_text": "Entdeckten Apparater tauchen op dëser Platz op. Suivéiert d'Instruktiounen fir är Apparater an aktivéiert den Kupplung's Mod."
                     }
                 },
                 "area_registry": {
@@ -684,10 +697,10 @@
                     "token_title": "Jeton erneiren fir {clientId}",
                     "created_at": "Erstallt um {date}",
                     "confirm_delete": "Sécher fir den Erneierungs Jeton fir {name} ze läsche?",
-                    "delete_failed": "Fehler beim läschen vum Erneierungs Jeton.",
+                    "delete_failed": "Feeler beim läschen vum Erneierungs Jeton.",
                     "last_used": "Fir d'Läscht benotzt um {date} vun {location}",
                     "not_used": "Nach nie benotzt ginn",
-                    "current_token_tooltip": "Fehler beim läschen vum aktuellen Erneierungs Jeton"
+                    "current_token_tooltip": "Feeler beim läschen vum aktuellen Erneierungs Jeton"
                 },
                 "long_lived_access_tokens": {
                     "header": "Lang gëlteg Accèss Jetone",
@@ -695,9 +708,9 @@
                     "learn_auth_requests": "Leiert wéi een \"authenticated requests\" erstellt.",
                     "created_at": "Erstallt um {date}",
                     "confirm_delete": "Sécher fir den Accèss Jeton fir {name} ze läsche?",
-                    "delete_failed": "Fehler beim läschen vum Accèss Jeton",
+                    "delete_failed": "Feeler beim läschen vum Accèss Jeton",
                     "create": "Jeton erstellen",
-                    "create_failed": "Fehler beim erstellen vum Accèss Jeton",
+                    "create_failed": "Feeler beim erstellen vum Accèss Jeton",
                     "prompt_name": "Numm?",
                     "prompt_copy_token": "Kopéiert den Accèss Jeton. E gëtt nie méi ugewisen.",
                     "empty_state": "Et ginn nach keng laang gëlteg Accèss Jeton.",
@@ -919,11 +932,11 @@
             "save": "Späicheren"
         },
         "duration": {
-            "day": "{count} {count, plural,\none {dag}\nother {deeg}\n}",
+            "day": "{count} {count, plural,\none {Dag}\nother {Deeg}\n}",
-            "week": "{count} {count, plural,\none {woch}\nother {woche}\n}",
+            "week": "{count} {count, plural,\none {Woch}\nother {Wochen}\n}",
-            "second": "{count} {count, plural,\none {sekonn}\nother {sekonne}\n}",
+            "second": "{count} {count, plural,\none {Sekonn}\nother {Sekonnen}\n}",
-            "minute": "{count} {count, plural,\n  one {minutt}\n  other {minutten}\n}",
+            "minute": "{count} {count, plural,\n  one {Minutt}\n  other {Minutten}\n}",
-            "hour": "{count} {count, plural,\n  one {stonn}\n  other {stonnen}\n}"
+            "hour": "{count} {count, plural,\n  one {Stonn}\n  other {Stonnen}\n}"
         },
         "login-form": {
             "password": "Passwuert",
@@ -1052,11 +1065,11 @@
                 "future": "An {time}",
                 "never": "Nie",
                 "duration": {
-                    "second": "{count} {count, plural,\none {sekonn}\nother {sekonne}\n}",
+                    "second": "{count} {count, plural,\none {Sekonn}\nother {Sekonnen}\n}",
-                    "minute": "{count} {count, plural,\n  one {minutt}\n  other {minutten}\n}",
+                    "minute": "{count} {count, plural,\n  one {Minutt}\n  other {Minutten}\n}",
-                    "hour": "{count} {count, plural,\n  one {stonn}\n  other {stonnen}\n}",
+                    "hour": "{count} {count, plural,\n  one {Stonn}\n  other {Stonnen}\n}",
-                    "day": "{count} {count, plural,\none {dag}\nother {deeg}\n}",
+                    "day": "{count} {count, plural,\none {Dag}\nother {Deeg}\n}",
-                    "week": "{count} {count, plural,\none {woch}\nother {woche}\n}"
+                    "week": "{count} {count, plural,\none {Woch}\nother {Wochen}\n}"
                 }
             },
             "history_charts": {
@@ -1068,7 +1081,7 @@
             "entity_turned_on": "{entity} gouf ugeschalt",
             "entity_turned_off": "{entity} gouf ausgeschalt",
             "service_called": "Service {service} operuff",
-            "service_call_failed": "Fehler beim opruffen vun {service}",
+            "service_call_failed": "Feeler beim opruffen vun {service}",
             "connection_lost": "Verbindung verluer. Verbindung gëtt nees opgebaut..."
         },
         "dialogs": {
@@ -1104,7 +1117,7 @@
     },
     "domain": {
         "alarm_control_panel": "Kontroll Feld Alarm",
-        "automation": "Automatisme",
+        "automation": "Automatismen",
         "binary_sensor": "Binären Sensor",
         "calendar": "Kalenner",
         "camera": "Kamera",

translations/lt.json

@@ -133,7 +133,9 @@
     "state_badge": {
         "default": {
             "unknown": "Nžn",
-            "unavailable": "Nežin"
+            "unavailable": "Nežin",
+            "error": "Klaida",
+            "entity_not_found": "Objektas nerastas"
         },
         "alarm_control_panel": {
             "armed": "Užrakinta",
@@ -257,7 +259,18 @@
                 "zha": {
                     "description": "„Zigbee Home Automation“ tinklo valdymas",
                     "services": {
-                        "updateDeviceName": "Nustatyti pasirinktinį pavadinimą šiam įrenginiu, prietaisų registre."
+                        "updateDeviceName": "Nustatyti pasirinktinį pavadinimą šiam įrenginiu, prietaisų registre.",
+                        "remove": "Pašalinkite įrenginį iš „ZigBee“ tinklo."
+                    },
+                    "device_card": {
+                        "device_name_placeholder": "Vartotojo suteiktas vardas",
+                        "area_picker_label": "Sritis",
+                        "update_name_button": "Atnaujinti pavadinimą"
+                    },
+                    "add_device_page": {
+                        "header": "„Zigbee“ namų automatika - pridėti įrenginių",
+                        "spinner": "Ieškoma ZHA Zigbee įrenginių...",
+                        "discovery_text": "Čia bus rodomi atrasti įrenginiai. Vadovaukitės jūsų įtaiso instrukcijomis ir nustatykite jį suporavimo režimui."
                     }
                 },
                 "area_registry": {
@@ -284,6 +297,7 @@
                     "picker": {
                         "header": "Subjektų registras",
                         "unavailable": "(nepasiekiamas)",
+                        "introduction2": "Naudokite subjekto registrą, kad perrašytumėte pavadinimą, pakeiskite subjekto ID arba pašalintumėte įrašą iš namų asistento. Atminkite, kad pašalindami registro įrašą tai nepanaikins pačio subjekto. Norėdami tai padaryti, sekite toliau pateiktą nuorodą ir pašalinkite ją iš integracijos puslapio.",
                         "integrations_page": "Integracijų puslapis"
                     },
                     "editor": {

translations/nb.json

@@ -46,7 +46,7 @@
             },
             "moisture": {
                 "off": "Tørr",
-                "on": "Fukt"
+                "on": "Fuktig"
             },
             "gas": {
                 "off": "Klar",
@@ -114,7 +114,7 @@
             },
             "window": {
                 "off": "Lukket",
-                "on": "Åpen"
+                "on": "Åpent"
             },
             "lock": {
                 "off": "Låst",
@@ -307,9 +307,9 @@
     "ui": {
         "panel": {
             "shopping-list": {
-                "clear_completed": "Fjern fullført",
+                "clear_completed": "Fjerning fullført",
                 "add_item": "Legg til",
-                "microphone_tip": "Trykk på mikrofonen øverst til høyre og si “Add candy to my shopping list”"
+                "microphone_tip": "Aktiver mikrofonen øverst til høyre og si “Add candy to my shopping list”"
             },
             "history": {
                 "showing_entries": "Viser oppføringer for",
@@ -340,7 +340,7 @@
                                 "introduction": "Sjekk konfigurasjon din hvis du nylig har gjort noen endringer og ønsker å være sikker på at den er gyldig ved å kjøre en valideringstest",
                                 "check_config": "Sjekk konfigurasjonen",
                                 "valid": "Konfigurasjonen er gyldig!",
-                                "invalid": "Konfigurasjonen er ikke gyldig"
+                                "invalid": "Ugyldig konfigurasjon"
                             },
                             "reloading": {
                                 "heading": "Laster konfigurasjon på nytt",
@@ -352,7 +352,7 @@
                             },
                             "server_management": {
                                 "heading": "Serveradministrasjon",
-                                "introduction": "Kontroller din Home Assistant server...fra Home Assistant.",
+                                "introduction": "Kontroller din Home Assistant server... fra Home Assistant.",
                                 "restart": "Start på nytt",
                                 "stop": "Stopp"
                             }
@@ -386,7 +386,7 @@
                         "alias": "Navn",
                         "triggers": {
                             "header": "Utløsere",
-                            "introduction": "Utløsere er det som starter en automatisering. Det er mulig å spesifisere flere utløsere for samme automatiseringen. Når en utløser starter, vil Home Assistant bekrefte vilkårene, hvis noen, og kjøre handlingen. \n\n[Lær mer om utløsere.](https:\/\/home-assistant.io\/docs\/automation\/trigger\/)",
+                            "introduction": "Utløsere er det som starter en automatiseringsregel. Det er mulig å spesifisere flere utløsere for samme regel. Når en utløser aktiveres, vil Home Assistant bekrefte vilkårene, hvis noen, og kjøre handlingen. \n\n[Lær mer om utløsere.](https:\/\/home-assistant.io\/docs\/automation\/trigger\/)",
                             "add": "Legg til utløser",
                             "duplicate": "Dupliser",
                             "delete": "Slett",
@@ -461,20 +461,20 @@
                                     "zone": "Sone",
                                     "event": "Hendelse:",
                                     "enter": "Ankommer",
-                                    "leave": "Foralter"
+                                    "leave": "Forlater"
                                 }
                             },
                             "learn_more": "Lær mer om utløsere"
                         },
                         "conditions": {
                             "header": "Betingelser",
-                            "introduction": "Betingelser er en valgfri del av en automatisering og kan brukes til å forhindre at en handling skjer når den utløses. Betingelsene ser veldig ut som utløsere, men er veldig forskjellige. En utløser vil se på hendelser som skjer i systemet, mens en betingelse bare ser på hvordan systemet ser ut akkurat nå. En utløser kan observere at en bryter er slått på. En betingelse kan bare se om en bryter for øyeblikket er på eller av. \n\n[Lær mer om betingelser.](https:\/\/home-assistant.io\/docs\/scripts\/conditions\/)",
+                            "introduction": "Betingelser er en valgfri del av en automatiseringsregel og kan brukes til å forhindre at en handling skjer når den blir aktivert. \nBetingelsene ser veldig ut som utløsere, men er veldig forskjellige. \nEn utløser vil se på hendelser som skjer i systemet, mens en betingelse bare ser på hvordan systemet ser ut akkurat nå. En utløser kan observere at en bryter er slått på. En betingelse kan bare se om en bryter for øyeblikket er på eller av. \n\n[Lær mer om betingelser.](https:\/\/home-assistant.io\/docs\/scripts\/conditions\/)",
                             "add": "Legg til betingelse",
                             "duplicate": "Dupliser",
                             "delete": "Slett",
                             "delete_confirm": "Er du sikker på at du ønsker å slette?",
                             "unsupported_condition": "Ikke-støttet tilstand: {condition}",
-                            "type_select": "Betingelse type",
+                            "type_select": "Type Betingelse",
                             "type": {
                                 "state": {
                                     "label": "Tilstand",
@@ -514,7 +514,7 @@
                         },
                         "actions": {
                             "header": "Handlinger",
-                            "introduction": "As acções são o que o Home Assistant fará quando uma automatização for despoletada.\n\n[Ler mais em :](https:\/\/home-assistant.io\/docs\/automation\/action\/)",
+                            "introduction": "Handling(ene) er hva Home Assistant vil utføre når en automatisering utløses.",
                             "add": "Legg til handling",
                             "duplicate": "Dupliser",
                             "delete": "Slett",
@@ -613,11 +613,14 @@
                         "remove": "Fjern en enhet fra ZigBee-nettverket."
                     },
                     "device_card": {
+                        "device_name_placeholder": "Brukerdefinert navn",
                         "area_picker_label": "Område",
                         "update_name_button": "Oppdater navn"
                     },
                     "add_device_page": {
-                        "header": "Zigbee Home Automation - Legg til enheter"
+                        "header": "ZigBee Home Automation - Legg til enheter",
+                        "spinner": "Søker etter ZHA Zigbee enheter...",
+                        "discovery_text": "Oppdagede enheter vises her. Følg instruksjonene for enheten(e) og sett enheten(e) i parringsmodus."
                     }
                 },
                 "area_registry": {
@@ -647,7 +650,7 @@
                         "header": "Enhetsregister",
                         "unavailable": "(utilgjengelig)",
                         "introduction": "Home Assistant beholder et register over hver enhet som den noensinne har sett som kan identifiseres unikt. Hver av disse enhetene vil ha en enhets ID tilknyttet som vil bli reservert for bare denne enheten.",
-                        "introduction2": "Bruk entitetsregisteret til å overskrive navnet, endre enhets ID eller fjern oppføringen fra Home Assistant. Merk at fjerning av enhetsregisteroppføringer ikke fjerner enheten. For å gjøre det, følg linken under og fjern den fra integrasjonssiden.",
+                        "introduction2": "Bruk entitetsregisteret for å overskrive navnet, endre enhets ID eller fjern oppføringen fra Home Assistant. Merk at fjerning av enhetsregisteroppføringer ikke fjerner enheten. For å gjøre det, følg linken under og fjern den fra integrasjonssiden.",
                         "integrations_page": "Integrasjonsside"
                     },
                     "editor": {
@@ -806,7 +809,7 @@
                                 }
                             },
                             "abort": {
-                                "not_whitelisted": "Datamaskinen din er ikke hvitlistet."
+                                "not_whitelisted": "Datamaskinen din er ikke hvitelistet."
                             }
                         },
                         "command_line": {
@@ -878,9 +881,9 @@
                         "move": "Flytt"
                     },
                     "migrate": {
-                        "header": "Konfigurasjon inkompatibel",
+                        "header": "Inkompatibel Konfigurasjon",
-                        "para_no_id": "Dette elementet har ingen ID. Vennligst legg til en ID til dette elementet i 'ui-lovelace.yaml'.",
+                        "para_no_id": "Dette elementet har ingen ID. Vennligst legg til en ID på dette elementet i 'ui-lovelace.yaml'.",
-                        "para_migrate": "Home Assistant kan legge til ID-er til alle dine kort og visninger automatisk for deg ved å trykke på 'Overfør konfigurasjon' knappen.",
+                        "para_migrate": "Home Assistant kan legge til ID-er på alle dine kort og visninger automatisk for deg ved å trykke på 'Overfør konfigurasjon' knappen.",
                         "migrate": "Overfør konfigurasjon"
                     },
                     "header": "Rediger brukergrensesnitt",
@@ -892,7 +895,7 @@
                     },
                     "save_config": {
                         "header": "Ta kontroll over Lovelace brukergrensesnittet ditt",
-                        "para": "Home Assistant hjelper som standard med å vedlikeholde brukergrensesnittet ditt, oppdaterer det når nye enheter eller Lovelace-komponenter blir tilgjengelige. Hvis du tar kontroll, vil vi ikke lenger gjøre endringer automatisk for deg.",
+                        "para": "Som standard hjelper Home Assistant til med å vedlikeholde brukergrensesnittet ditt, oppdaterer det når nye enheter eller Lovelace-komponenter blir tilgjengelige. Hvis du tar kontroll, vil vi ikke lenger gjøre endringer automatisk for deg.",
                         "para_sure": "Er du sikker på at du vil ta kontroll over brukergrensesnittet ditt?",
                         "cancel": "Glem det",
                         "save": "Ta kontroll"
@@ -983,7 +986,7 @@
             },
             "alarm_control_panel": {
                 "code": "Kode",
-                "clear_code": "Klarer",
+                "clear_code": "Tøm",
                 "disarm": "Deaktiver",
                 "arm_home": "Armer hjemme",
                 "arm_away": "Armer borte",

translations/nl.json

@@ -279,7 +279,9 @@
     "state_badge": {
         "default": {
             "unknown": "Onbek.",
-            "unavailable": "Niet besch"
+            "unavailable": "Niet besch",
+            "error": "Fout",
+            "entity_not_found": "Entiteit niet gevonden"
         },
         "alarm_control_panel": {
             "armed": "Actief",
@@ -607,7 +609,18 @@
                     "description": "Zigbee Home Automation netwerkbeheer",
                     "services": {
                         "reconfigure": "Herconfigureer het ZHA-apparaat (heal device). Gebruik dit als je problemen hebt met het apparaat. Als het een apparaat met batterij is, zorg dan dat het wakker is en commando's accepteert wanneer je deze service gebruikt.",
-                        "updateDeviceName": "Stel een aangepaste naam in voor dit apparaat in het apparaatregister."
+                        "updateDeviceName": "Stel een aangepaste naam in voor dit apparaat in het apparaatregister.",
+                        "remove": "Verwijder een apparaat uit het ZigBee-netwerk."
+                    },
+                    "device_card": {
+                        "device_name_placeholder": "Door gebruiker ingegeven naam",
+                        "area_picker_label": "Gebied",
+                        "update_name_button": "Naam bijwerken"
+                    },
+                    "add_device_page": {
+                        "header": "ZigBee Home Automation - Apparaten toevoegen",
+                        "spinner": "Zoeken naar ZHA Zigbee-apparaten ...",
+                        "discovery_text": "Gevonden apparaten worden hier weergegeven. Volg de instructies voor uw apparaat of apparaten en plaats het apparaat of de apparaten in de koppelingsmodus."
                     }
                 },
                 "area_registry": {

translations/nn.json

@@ -237,7 +237,7 @@
             },
             "query_stage": {
                 "initializing": "Initialiserer ({query_stage})",
-                "dead": "Død ({query_stage})"
+                "dead": "Dau ({query_stage})"
             }
         },
         "weather": {
@@ -279,7 +279,8 @@
     "state_badge": {
         "default": {
             "unknown": "Ukjent",
-            "unavailable": "Utilgjengeleg"
+            "unavailable": "Utilgjengeleg",
+            "error": "Feil"
         },
         "alarm_control_panel": {
             "armed": "Påslått",
@@ -314,7 +315,7 @@
                 "period": "Periode"
             },
             "logbook": {
-                "showing_entries": "Viser oppføringer for",
+                "showing_entries": "Visar oppføringar for",
                 "period": "Periode"
             },
             "mailbox": {
@@ -607,6 +608,12 @@
                     "description": "Zigbee heimeautomasjon nettverksadministrering",
                     "services": {
                         "reconfigure": "Konfigurer ZHA-eininga (heal device) på nytt. Bruk dette om du har problem med eininga. Dersom eining går på batteri, ver sikker på at den er vaken og tek i mot kommandar når du brukar denne tenesta."
+                    },
+                    "device_card": {
+                        "update_name_button": "Oppdater namn"
+                    },
+                    "add_device_page": {
+                        "spinner": "Leitar etter ZHA ZigBee apparat..."
                     }
                 },
                 "area_registry": {
@@ -836,7 +843,8 @@
                     },
                     "create_account": "Lag konto",
                     "error": {
-                        "required_fields": "Fyll ut dei nødvendige felta"
+                        "required_fields": "Fyll ut dei nødvendige felta",
+                        "password_not_match": "Passorda er ikkje eins"
                     }
                 }
             },
@@ -918,7 +926,7 @@
         "duration": {
             "day": "{count} {count, plural,\none {dag}\nother {dagar}\n}",
             "week": "{count} {count, plural,\none {veke}\nother {veker}\n}",
-            "second": "{count} {count, plural,\none {sekund}\nother {sekunder}\n}",
+            "second": "{count} {count, plural,\none {sekund}\nother {sekundar}\n}",
             "minute": "{count} {count, plural,\none {minutt}\nother {minutt}\n}",
             "hour": "{count} {count, plural,\none {time}\nother {timar}\n}"
         },
@@ -1160,6 +1168,7 @@
         }
     },
     "groups": {
-        "system-admin": "Administratorer"
+        "system-admin": "Administratorer",
+        "system-users": "Brukarar"
     }
 }

translations/pl.json

@@ -86,7 +86,7 @@
             },
             "battery": {
                 "off": "naładowana",
-                "on": "rozładowana"
+                "on": "Rozładowana"
             },
             "problem": {
                 "off": "ok",
@@ -468,7 +468,7 @@
                         },
                         "conditions": {
                             "header": "Warunki",
-                            "introduction": "Warunki są opcjonalną częścią reguły automatyzacji i można ich użyć, aby zapobiec działaniom po uruchomieniu. Warunki wyglądają bardzo podobnie do wyzwalaczy, ale są bardzo różne. Wyzwalacz będzie analizował zdarzenia zachodzące w systemie, a warunek będzie dotyczył tylko tego, jak wygląda teraz system. Wyzwalacz może zaobserwować, że przełącznik jest przełączany. Warunek może tylko sprawdzić, czy przełącznik jest aktualnie włączony lub wyłączony. ",
+                            "introduction": "Warunki są opcjonalną częścią reguły automatyzacji i można ich użyć, aby zapobiec działaniom po uruchomieniu. Warunki wyglądają bardzo podobnie do wyzwalaczy, ale są bardzo różne. Wyzwalacz będzie analizował zdarzenia zachodzące w systemie, a warunek będzie dotyczył tylko tego, jak wygląda teraz system. Wyzwalacz może zaobserwować, że przełącznik jest przełączany. Warunek może tylko sprawdzić, czy przełącznik jest aktualnie włączony lub wyłączony.",
                             "add": "Dodaj warunek",
                             "duplicate": "Duplikuj",
                             "delete": "Usuń",
@@ -635,12 +635,12 @@
                         "create_area": "UTWÓRZ OBSZAR"
                     },
                     "no_areas": "Wygląda na to, że jeszcze nie masz zdefiniowanych obszarów!",
-                    "create_area": "STWÓRZ OBSZAR",
+                    "create_area": "UTWÓRZ OBSZAR",
                     "editor": {
                         "default_name": "Nowy obszar",
                         "delete": "USUŃ",
                         "update": "UAKTUALNIJ",
-                        "create": "STWÓRZ"
+                        "create": "UTWÓRZ"
                     }
                 },
                 "entity_registry": {

translations/ru.json

@@ -1062,7 +1062,7 @@
             },
             "relative_time": {
                 "past": "{time} назад",
-                "future": "{time} назад",
+                "future": "через {time}",
                 "never": "Никогда",
                 "duration": {
                     "second": "{count} {count, plural,\n  one {сек.}\n  other {сек.}\n}",

translations/sk.json

@@ -265,12 +265,18 @@
             "on": "Zapnutý",
             "paused": "Pozastavený",
             "returning": "Vracia sa do doku"
+        },
+        "person": {
+            "home": "Doma",
+            "not_home": "Preč"
         }
     },
     "state_badge": {
         "default": {
             "unknown": "Nezn",
-            "unavailable": "Nedost"
+            "unavailable": "Nedost",
+            "error": "Chyba",
+            "entity_not_found": "Entita nebola nájdená"
         },
         "alarm_control_panel": {
             "armed": "Zakód",
@@ -287,6 +293,10 @@
         "device_tracker": {
             "home": "Doma",
             "not_home": "Preč"
+        },
+        "person": {
+            "home": "Doma",
+            "not_home": "Preč"
         }
     },
     "ui": {
@@ -359,7 +369,8 @@
                         "introduction": "Editor automatizácií vám umožňuje vytvárať a upravovať automatizácie. Prečítajte si prosím [pokyny](https:\/\/home-assistant.io\/docs\/automation\/editor\/), aby ste sa uistili, že ste nakonfigurovali Home Assistant správne.",
                         "pick_automation": "Vyberte automatizáciu, ktorú chcete upraviť",
                         "no_automations": "Nepodarilo sa nájsť žiadne editovateľné automatizácie",
-                        "add_automation": "Pridať automatizáciu"
+                        "add_automation": "Pridať automatizáciu",
+                        "learn_more": "Získajte viac informácií o automatizáciách"
                     },
                     "editor": {
                         "introduction": "Použite automatizácie, aby váš domov ožil",
@@ -445,7 +456,8 @@
                                     "event": "Udalosť:",
                                     "leave": "Opustiť"
                                 }
-                            }
+                            },
+                            "learn_more": "Získajte viac informácií o spúšťačoch"
                         },
                         "conditions": {
                             "header": "Podmienky",
@@ -490,11 +502,12 @@
                                     "entity": "Entita s umiestnením",
                                     "zone": "Zóna"
                                 }
-                            }
+                            },
+                            "learn_more": "Získajte viac informácií o podmienkach"
                         },
                         "actions": {
                             "header": "Akcie",
-                            "introduction": "Akcie, ktoré vykoná domáci asistent, sa aktivujú po spustení automatizácie. \n\n [Viac informácií o akciách.](https:\/\/home-assistant.io\/docs\/automation\/action\/)",
+                            "introduction": "Akcie, ktoré vykoná Home Assistant, sa aktivujú po spustení automatizácie. \n\n [Viac informácií o akciách.](https:\/\/home-assistant.io\/docs\/automation\/action\/)",
                             "add": "Pridať akciu",
                             "duplicate": "Duplikovať",
                             "delete": "Odstrániť",
@@ -523,7 +536,8 @@
                                     "event": "Udalosť:",
                                     "service_data": "Dáta služby"
                                 }
-                            }
+                            },
+                            "learn_more": "Získajte viac informácií o akciách"
                         }
                     }
                 },
@@ -546,7 +560,15 @@
                         "change_password": "Zmeniť heslo",
                         "activate_user": "Aktivovať používateľa",
                         "deactivate_user": "Deaktivovať používateľa",
-                        "delete_user": "Vymazať používateľa"
+                        "delete_user": "Vymazať používateľa",
+                        "caption": "Zobraziť používateľa"
+                    },
+                    "add_user": {
+                        "caption": "Pridať používateľa",
+                        "name": "Meno",
+                        "username": "Užívateľské meno",
+                        "password": "Heslo",
+                        "create": "Vytvoriť"
                     }
                 },
                 "cloud": {
@@ -577,13 +599,22 @@
                 },
                 "zha": {
                     "caption": "ZHA",
-                    "description": "Správa siete ZigBee Home Automation"
+                    "description": "Správa siete ZigBee Home Automation",
+                    "services": {
+                        "updateDeviceName": "Nastavte vlastný názov pre toto zariadenie v registri zariadenia."
+                    },
+                    "device_card": {
+                        "area_picker_label": "Oblasť"
+                    }
                 },
                 "area_registry": {
                     "caption": "Register oblastí",
                     "description": "Prehľad všetkých oblastí vo vašej domácnosti.",
                     "picker": {
-                        "header": "Register oblastí"
+                        "header": "Register oblastí",
+                        "integrations_page": "Stránka Integrácie",
+                        "no_areas": "Vyzerá to, že ešte nemáte žiadne oblasti!",
+                        "create_area": "VYTVORIŤ OBLASŤ"
                     },
                     "no_areas": "Vyzerá to, že ešte nemáte žiadne oblasti!",
                     "create_area": "VYTVORIŤ OBLASŤ",
@@ -599,7 +630,8 @@
                     "description": "Prehľad všetkých známych entít.",
                     "picker": {
                         "header": "Register entít",
-                        "unavailable": "(nedostupné)"
+                        "unavailable": "(nedostupné)",
+                        "integrations_page": "Stránka Integrácie"
                     },
                     "editor": {
                         "unavailable": "Táto entita nie je momentálne k dispozícii.",
@@ -770,16 +802,16 @@
                                 },
                                 "mfa": {
                                     "data": {
-                                        "code": "Dvojfaktorový autentifikačný kód"
+                                        "code": "2-faktorový autentifikačný kód"
                                     }
                                 }
                             },
                             "error": {
-                                "invalid_auth": "Nesprávne používateľske meno alebo heslo",
+                                "invalid_auth": "Nesprávne používateľské meno alebo heslo",
                                 "invalid_code": "Nesprávny autentifikačný kód"
                             },
                             "abort": {
-                                "login_expired": "Relácia vypršala, prihlásťe sa prosím znova"
+                                "login_expired": "Relácia vypršala, prihláste sa prosím znova"
                             }
                         }
                     }
@@ -793,11 +825,13 @@
                     "data": {
                         "name": "Meno",
                         "username": "Používateľské meno",
-                        "password": "Heslo"
+                        "password": "Heslo",
+                        "password_confirm": "Potvrďte nové heslo"
                     },
                     "create_account": "Vytvoriť účet",
                     "error": {
-                        "required_fields": "Vyplňte všetky povinné polia"
+                        "required_fields": "Vyplňte všetky povinné polia",
+                        "password_not_match": "Heslá sa nezhodujú"
                     }
                 }
             },
@@ -846,6 +880,12 @@
                     },
                     "menu": {
                         "raw_editor": "Raw editor konfigurácie"
+                    },
+                    "raw_editor": {
+                        "header": "Upraviť konfiguráciu",
+                        "save": "Uložiť",
+                        "unsaved_changes": "Neuložené zmeny",
+                        "saved": "Uložené"
                     }
                 },
                 "menu": {
@@ -853,6 +893,10 @@
                     "unused_entities": "Nepoužité entity",
                     "help": "Pomoc",
                     "refresh": "Obnoviť"
+                },
+                "warning": {
+                    "entity_not_found": "Entita nie je k dispozícií",
+                    "entity_non_numeric": "Entita je nečíselná: {entity}"
                 }
             }
         },
@@ -1020,7 +1064,7 @@
         "dialogs": {
             "more_info_settings": {
                 "save": "Uložiť",
-                "name": "Názov",
+                "name": "Prepísať názov",
                 "entity_id": "Entity ID"
             },
             "more_info_control": {
@@ -1088,7 +1132,8 @@
         "zha": "ZHA",
         "hassio": "Hass.io",
         "homeassistant": "Home Assistant",
-        "lovelace": "Lovelace"
+        "lovelace": "Lovelace",
+        "person": "Osoba"
     },
     "attribute": {
         "weather": {
@@ -1096,5 +1141,9 @@
             "visibility": "Viditeľnosť",
             "wind_speed": "Rýchlosť vetra"
         }
+    },
+    "groups": {
+        "system-admin": "Správcovia",
+        "system-users": "Používatelia"
     }
 }

translations/sl.json

@@ -279,7 +279,9 @@
     "state_badge": {
         "default": {
             "unknown": "Neznano",
-            "unavailable": "N\/A"
+            "unavailable": "N\/A",
+            "error": "Napaka",
+            "entity_not_found": "Subjekt ni bil najden"
         },
         "alarm_control_panel": {
             "armed": "Aktiven",
@@ -607,7 +609,18 @@
                     "description": "Upravljanje omrežja za avtomatizacijo doma Zigbee",
                     "services": {
                         "reconfigure": "Ponovno konfigurirajte napravo ZHA (\"pozdravite\" napravo). To uporabite, če imate z njo težave. Če ta naprava deluje na baterije, se prepričajte, da je budna in sprejema ukaze pri uporabi te storitve.",
-                        "updateDeviceName": "Nastavite ime po meri za to napravo v registru naprav."
+                        "updateDeviceName": "Nastavite ime po meri za to napravo v registru naprav.",
+                        "remove": "Odstranite napravo iz omrežja ZigBee."
+                    },
+                    "device_card": {
+                        "device_name_placeholder": "Ime, ki ga je dodelil uporabnik",
+                        "area_picker_label": "Območje",
+                        "update_name_button": "Posodobi ime"
+                    },
+                    "add_device_page": {
+                        "header": "Zigbee Home Automation - Dodaj naprave",
+                        "spinner": "Iskanje ZHA Zigbee naprav...",
+                        "discovery_text": "Tukaj bodo prikazane odkrite naprave. Sledite navodilom za napravo in jo postavite v način seznanjanja."
                     }
                 },
                 "area_registry": {
@@ -1066,7 +1079,7 @@
         },
         "notification_toast": {
             "entity_turned_on": "Vklopljen je {entity} .",
-            "entity_turned_off": "Izklopljen {entity} .",
+            "entity_turned_off": "Izklopljen {entity}.",
             "service_called": "Storitev {service} klicana.",
             "service_call_failed": "Storitve ni bilo mogoče poklicati {service}.",
             "connection_lost": "Povezava prekinjena. Vnovično vzpostavljanje povezave..."

translations/sv.json

@@ -279,7 +279,9 @@
     "state_badge": {
         "default": {
             "unknown": "Okänd",
-            "unavailable": "Otillgänglig"
+            "unavailable": "Otillgänglig",
+            "error": "Fel",
+            "entity_not_found": "Enheten hittades inte"
         },
         "alarm_control_panel": {
             "armed": "Tillkopplat",
@@ -466,7 +468,7 @@
                         },
                         "conditions": {
                             "header": "Villkor",
-                            "introduction": "Villkoren är en valfri del av en automatiseringsregel och kan användas för att förhindra att en åtgärd inträffar när den triggas. Villkoren liknar triggers men är väldigt olika. En trigger kommer att se på händelser som händer i systemet medan ett villkor bara tittar på hur systemet ser ut just nu. En trigger kan observera att en strömbrytare slås på. Ett villkor kan bara se om en strömbrytare är på eller av. \n\n [Lär dig mer om villkoren.] (Https:\/\/home-assistant.io\/docs\/scripts\/conditions\/)",
+                            "introduction": "Villkor är en valfri del av en automatiseringsregel och kan användas för att förhindra att en åtgärd inträffar när den triggas. Villkoren liknar triggers men är väldigt olika. En trigger reagerar på händelser som händer i systemet medan ett villkor bara utvärderar hur systemet ser ut just nu. En trigger kan reagera på att en strömbrytare slås på. Ett villkor kan bara se om en strömbrytare är på eller av. \n\n [Lär dig mer om villkoren.] (Https:\/\/home-assistant.io\/docs\/scripts\/conditions\/)",
                             "add": "Lägg till villkor",
                             "duplicate": "Duplicera",
                             "delete": "Radera",
@@ -607,7 +609,18 @@
                     "description": "Zigbee Home Automation (ZHA) nätverkshantering",
                     "services": {
                         "reconfigure": "Omkonfigurera ZHA-enheten (läk enheten). Använd det här om du har problem med enheten. Om den aktuella enheten är en batteridriven enhet, se till att den är påslagen och accepterar kommandon när du använder den här tjänstens funktion.",
-                        "updateDeviceName": "Ange ett anpassat namn för den här enheten i enhetsregistret"
+                        "updateDeviceName": "Ange ett anpassat namn för den här enheten i enhetsregistret",
+                        "remove": "Ta bort en enhet från ZigBee-nätverket."
+                    },
+                    "device_card": {
+                        "device_name_placeholder": "Användarnamn",
+                        "area_picker_label": "Plats",
+                        "update_name_button": "Uppdatera namn"
+                    },
+                    "add_device_page": {
+                        "header": "Zigbee Home Automation - Lägg till enheter",
+                        "spinner": "Söker efter ZHA Zigbee-enheter ...",
+                        "discovery_text": "Upptäckta enheter kommer dyka upp här. Följ instruktionerna för dina enheter och sätt dem i parningsläge."
                     }
                 },
                 "area_registry": {

translations/ta.json

@@ -124,7 +124,7 @@
             "open": "திறக்கப்பட்டுள்ளது",
             "opening": "திறக்கிறது",
             "closed": "மூடப்பட்டது",
-            "closing": "மூடுகிறது ",
+            "closing": "மூடுகிறது",
             "stopped": "நிறுத்தப்பட்டது"
         },
         "device_tracker": {
@@ -221,7 +221,7 @@
             "armed_home": "எச்சரிக்கை ஒலி அமைக்கப்பட்டுள்ளது ",
             "armed_away": "எச்சரிக்கை ஒலி அமைக்கப்பட்டுள்ளது ",
             "armed_night": "எச்சரிக்கை ஒலி அமைக்கப்பட்டுள்ளது ",
-            "pending": "கிடப்பில் ",
+            "pending": "கிடப்பில்",
             "arming": "எச்சரிக்கை ஒலி அமைக்கிறது ",
             "disarming": "எச்சரிக்கை ஒலி அமைக்கப்படவில்லை",
             "triggered": "தூண்ட",

translations/th.json

@@ -241,7 +241,7 @@
             }
         },
         "weather": {
-            "clear-night": "เคลียร์, กลางคืน",
+            "clear-night": "ฟ้าโปร่ง, กลางคืน",
             "cloudy": "มีเมฆมาก",
             "fog": "หมอก",
             "hail": "ลูกเห็บ",
@@ -279,7 +279,9 @@
     "state_badge": {
         "default": {
             "unknown": "ไม่ทราบสถานะ",
-            "unavailable": "ไม่พร้อมใช้งาน"
+            "unavailable": "ไม่พร้อมใช้งาน",
+            "error": "เกิดข้อผิดพลาด",
+            "entity_not_found": "ไม่พบเอนทิตี"
         },
         "alarm_control_panel": {
             "armed": "เปิดการป้องกัน",
@@ -325,13 +327,13 @@
             },
             "config": {
                 "header": "การตั้งค่า Home Assistant",
-                "introduction": "ดูสิ! คุณสามารถที่จะกำหนดค่าส่วนประกอบต่างๆ ของคุณได้ โดยรวมถึงส่วนของระบบเชียวนะ! ถึงแม้ตอนนี้ส่วนการแสดงผลยังทำไม่ได้ก็ตาม แต่เรากำลังพัฒนามันอยู่ คงจะใช้ได้เร็วๆ นี้ละ",
+                "introduction": "ดูสิ! สามารถกำหนดค่าส่วนประกอบต่างๆ ของคุณได้ด้วย รวมถึงส่วนของระบบของ Home Assistant เลยเชียวนะ! ถึงแม้ตอนนี้ส่วนการแสดงผลยังทำไม่ได้ก็ตาม แต่เรากำลังพัฒนามันอยู่ คงจะใช้ได้เร็วๆ นี้ละ",
                 "core": {
                     "caption": "ทั่วไป",
                     "description": "ตรวจสอบไฟล์การกำหนดค่าและควบคุมเซิร์ฟเวอร์",
                     "section": {
                         "core": {
-                            "header": "การปรับแต่งและควบคุมเซิร์ฟเวอร์",
+                            "header": "การกำหนดค่าและควบคุมเซิร์ฟเวอร์",
                             "introduction": "เรารู้นะว่าการตั้งค่าเนี่ยมันน่าเบื่อขนาดไหน ในส่วนนี้มันจะช่วยทำให้ชีวิตคุณง่ายขึ้นนิดหน่อย",
                             "validation": {
                                 "heading": "ตรวจสอบการกำหนดค่า",
@@ -362,7 +364,7 @@
                     "description": "ปรับแต่งเอนทิตี้ในรูปแบบของคุณ",
                     "picker": {
                         "header": "การปรับแต่ง",
-                        "introduction": "ปรับแต่งคุณลักษณะต่อเอนทิตีละตัว โดยการเพิ่ม\/แก้ไขจะมีผลทันที เอาการกำหนดเองจะมีผลเมื่อมีการปรับปรุงเอนทิตี"
+                        "introduction": "ปรับแต่งคุณลักษณะของเอนทิตี้แต่ละตัว เมื่อมีการเพิ่มหรือแก้ไขจะมีผลทันที หากลบคุณลักษณะจะเห็นผลต่อเมื่อเอนทิตี้นั้นได้รับการอัพเดท"
                     }
                 },
                 "automation": {
@@ -607,7 +609,18 @@
                     "description": "การจัดการระบบอัติโนมัติของ Zigbee",
                     "services": {
                         "reconfigure": "กำหนดค่าอุปกรณ์ ZHA อีกครั้ง (เพื่อรักษาอุปกรณ์) ใช้สิ่งนี้หากคุณมีปัญหากับอุปกรณ์ หากอุปกรณ์ดังกล่าวเป็นอุปกรณ์ที่ใช้พลังงานจากแบตเตอรี่โปรดตรวจสอบให้แน่ใจว่าอุปกรณ์นั้นเปิดอยู่และยอมรับคำสั่งเมื่อคุณใช้บริการ",
-                        "updateDeviceName": "ตั้งชื่อที่กำหนดเองสำหรับอุปกรณ์นี้ในการลงทะเบียนอุปกรณ์"
+                        "updateDeviceName": "ตั้งชื่อที่กำหนดเองสำหรับอุปกรณ์นี้ในการลงทะเบียนอุปกรณ์",
+                        "remove": "ลบอุปกรณ์ออกจากเครือข่าย ZigBee"
+                    },
+                    "device_card": {
+                        "device_name_placeholder": "ชื่อที่ผู้ใช้กำหนดให้",
+                        "area_picker_label": "ห้อง",
+                        "update_name_button": "ชื่อการปรับปรุง"
+                    },
+                    "add_device_page": {
+                        "header": "Zigbee Home Automation - เพิ่มอุปกรณ์",
+                        "spinner": "กำลังค้นหาอุปกรณ์ ZHA Zigbee ...",
+                        "discovery_text": "อุปกรณ์ที่ค้นหาเจอจะปรากฏที่นี่ ทำตามคำแนะนำบนอุปกรณ์ของคุณและให้อุปกรณ์อยู่ในโหมดการจับคู่ด้วย"
                     }
                 },
                 "area_registry": {
@@ -680,27 +693,28 @@
                 },
                 "refresh_tokens": {
                     "header": "Refresh Tokens",
-                    "description": "ในแต่ละครั้ง Refresh Token จะถูกเห็นเป็น Login Session โดย Refresh Token จะถูกลบอัตโนมัติ เมื่อคุณออกจากระบบ Refresh Token จะยังถูกใช้ในบัญชีของคุณเสมอ",
+                    "description": "ในแต่ละครั้ง Refresh Token จะถูกเห็นเป็น Login Session โดย Refresh Token จะถูกลบอัตโนมัติเมื่อคุณกดปุ่มออกจากระบบ\nRefresh Token ต่อไปนี้กำลังถูกใช้ในบัญชีของคุณอยู่..",
                     "token_title": "Refresh Tokens สำหรับ {clientId}",
                     "created_at": "สร้างเมื่อ {date}",
                     "confirm_delete": "คุณแน่ใจหรือไม่ว่าต้องการลบ Refresh Tokens ของ {name} ?",
                     "delete_failed": "การลบ Refresh Token ล้มเหลว",
-                    "last_used": "ใช้ครั้งล่าสุดเมื่อ {date} ในตำแหน่ง {location}",
+                    "last_used": "ใช้ครั้งล่าสุดเมื่อ {date} จาก {location}",
                     "not_used": "ยังไม่เคยถูกใช้งาน",
                     "current_token_tooltip": "ไม่สามารถลบ Refresh Token ปัจจุบันได้"
                 },
                 "long_lived_access_tokens": {
-                    "header": "Access Tokens สำหรับการเข้าถึงระยะยาว",
+                    "header": "โทเค็นการเข้าถึงระยะยาว",
+                    "description": "สร้างโทเค็นการเข้าถึงระยะยาวเพื่อให้สคริปต์ของคุณเชื่อมต่อกับ Home Assistant ได้ โดยแต่ละโทเค็นที่สร้างขึ้นจะอยู่ได้ 10 ปีนับจากวันที่สร้าง\nโทเค็นการเข้าถึงระยะยาวต่อไปนี้กำลังถูกใช้ในบัญชีของคุณอยู่..",
                     "learn_auth_requests": "เรียนรู้วิธีสร้างคำขอที่มีการรับรองความถูกต้อง",
                     "created_at": "สร้างเมื่อ {date}",
                     "confirm_delete": "คุณแน่ใจหรือไม่ว่าต้องการลบโทเค็นการเข้าถึงของ {name} ?",
-                    "delete_failed": "เกิดข้อผิดพลาดในการลบ Access Token ",
+                    "delete_failed": "เกิดข้อผิดพลาดในการลบ Access Token",
                     "create": "สร้าง Token ใหม่",
                     "create_failed": "เกิดข้อผิดพลาดในการลบ Access Token ",
                     "prompt_name": "ชื่อ?",
                     "prompt_copy_token": "จด Access Token ของคุณไว้ที่อื่นด้วย มันจะไม่แสดงให้เห็นอีกแล้วหลังจากนี้",
-                    "empty_state": "คุณยังไม่มี Access Token ระยะยาวเลย",
+                    "empty_state": "คุณยังไม่มีโทเค็นการเข้าถึงระยะยาวเลย",
-                    "last_used": "ใช้ครั้งล่าสุดเมื่อ {date} ในตำแหน่ง {location}",
+                    "last_used": "ใช้ครั้งล่าสุดเมื่อ {date} จาก {location}",
                     "not_used": "ยังไม่เคยถูกใช้งาน"
                 },
                 "current_user": "ขณะนี้คุณเข้าสู่ระบบในชื่อ {fullName}",
@@ -715,7 +729,7 @@
                     "submit": "ส่งข้อมูล"
                 },
                 "mfa": {
-                    "header": "โมดูลการรับรองความถูกต้องด้วยหลายปัจจัย",
+                    "header": "โมดูลการพิสูจน์ตัวตนแบบหลายปัจจัย",
                     "disable": "ปิดการใช้งาน",
                     "enable": "เปิดใช้งาน",
                     "confirm_disable": "คุณแน่ใจหรือไม่ว่าต้องการปิดใช้งาน {name} ?"
@@ -869,6 +883,7 @@
                     "migrate": {
                         "header": "การกำหนดค่าไม่ถูกต้อง",
                         "para_no_id": "องค์ประกอบนี้ยังไม่มี ID (สามารถเพิ่ม ID ลงในองค์ประกอบนี้ได้ในไฟล์ 'ui-lovelace.yaml')",
+                        "para_migrate": "Home Assistant สามารถเพิ่มเลขกำกับของการ์ดและแสดงผลอัตโนมัติให้คุณได้ โดยกดปุ่ม 'Mirate Config'",
                         "migrate": "โอนย้ายการกำหนดค่า"
                     },
                     "header": "แก้ไข UI",
@@ -897,7 +912,7 @@
                 },
                 "menu": {
                     "configure_ui": "ตั้งค่าการแสดงผล",
-                    "unused_entities": "เอนทิตีที่ไม่ได้ถูกใช้",
+                    "unused_entities": "เอนทิตีที่ไม่ได้ใช้",
                     "help": "วิธีใช้",
                     "refresh": "รีเฟรช"
                 },
@@ -943,10 +958,10 @@
             },
             "weather": {
                 "attributes": {
-                    "air_pressure": "ความดันอากาศ",
+                    "air_pressure": "ความกดอากาศ",
                     "humidity": "ความชื้น",
                     "temperature": "อุณหภูมิ",
-                    "visibility": "ความชัดเจน",
+                    "visibility": "ทัศนวิสัย",
                     "wind_speed": "ความเร็วลม"
                 },
                 "cardinal_direction": {
@@ -961,13 +976,13 @@
                     "s": "ทิศใต้",
                     "se": "ทิศตะวันออกเฉียงใต้",
                     "sse": "ทิศอาคเนย์เฉียงใต้",
-                    "ssw": "ทิศหรดีเฉียงใต้",
+                    "ssw": "ทิศตะวันตกเฉียงใต้ค่อนใต้",
                     "sw": "ทิศตะวันตกเฉียงใต้",
                     "w": "ทิศตะวันตก",
                     "wnw": "ทิศพายัพเฉียงตะวันตก",
-                    "wsw": "ทิศหรดีเฉียงตะวันตก"
+                    "wsw": "ทิศตะวันตกเฉียงใต้ค่อนตะวันตก"
                 },
-                "forecast": "พยากรณ์"
+                "forecast": "พยากรณ์ล่วงหน้า"
             },
             "alarm_control_panel": {
                 "code": "รหัส",
@@ -1046,8 +1061,8 @@
                 "service": "บริการ"
             },
             "relative_time": {
-                "past": "{time}ที่ผ่านมา",
+                "past": "{time}ที่แล้ว",
-                "future": "{time} ที่ผ่านมา",
+                "future": "{time} ที่แล้ว",
                 "never": "ไม่เคย",
                 "duration": {
                     "second": "{count} {count, plural,\n  one {วินาที}\n  other {วินาที}\n}",
@@ -1147,7 +1162,7 @@
     "attribute": {
         "weather": {
             "humidity": "ความชื้น",
-            "visibility": "ความชัดเจน",
+            "visibility": "ทัศนวิสัย",
             "wind_speed": "ความเร็วลม"
         }
     },

translations/uk.json

@@ -279,7 +279,8 @@
     "state_badge": {
         "default": {
             "unknown": "Невід",
-            "unavailable": "Недост"
+            "unavailable": "Недост",
+            "error": "Помилка"
         },
         "alarm_control_panel": {
             "armed": "Охорона",

translations/zh-Hans.json

@@ -279,7 +279,9 @@
     "state_badge": {
         "default": {
             "unknown": "未知",
-            "unavailable": "不可用"
+            "unavailable": "不可用",
+            "error": "错误",
+            "entity_not_found": "未找到实体"
         },
         "alarm_control_panel": {
             "armed": "警戒中",
@@ -607,7 +609,16 @@
                     "description": "Zigbee 智能家居(ZHA) 网络管理",
                     "services": {
                         "reconfigure": "重新配置ZHA设备（唤醒设备）。如果您的设备遇到问题，请使用此项。如果有问题的设备是电池供电的，请确保在使用此服务时它处于唤醒状态并可以接受指令。",
-                        "updateDeviceName": "在设备注册表中为此设备设置自定义名称。"
+                        "updateDeviceName": "在设备注册表中为此设备设置自定义名称。",
+                        "remove": "从 ZigBee 网络中删除设备。"
+                    },
+                    "device_card": {
+                        "device_name_placeholder": "用户指定的名称"
+                    },
+                    "add_device_page": {
+                        "header": "Zigbee家庭自动化 - 添加设备",
+                        "spinner": "正在寻找ZHA Zigbee设备......",
+                        "discovery_text": "发现的设备将显示在此处。按照设备的说明进行操作，并将设备置于配对模式。"
                     }
                 },
                 "area_registry": {

translations/zh-Hant.json

@@ -279,7 +279,9 @@
     "state_badge": {
         "default": {
             "unknown": "未知",
-            "unavailable": "不可用"
+            "unavailable": "不可用",
+            "error": "錯誤",
+            "entity_not_found": "找不到物件"
         },
         "alarm_control_panel": {
             "armed": "已警戒",
@@ -607,7 +609,18 @@
                     "description": "Zigbee 家庭自動化網路管理",
                     "services": {
                         "reconfigure": "重新設定 ZHA Zibgee 裝置（健康裝置）。假如遇到裝置問題，請使用此選項。假如有問題的裝置為使用電池的裝置，請先確定裝置已喚醒並處於接受命令狀態。",
-                        "updateDeviceName": "於物件 ID 中自訂此設備名稱。"
+                        "updateDeviceName": "於物件 ID 中自訂此設備名稱。",
+                        "remove": "自 Zigbee 網路移除裝置。"
+                    },
+                    "device_card": {
+                        "device_name_placeholder": "使用者自訂名稱",
+                        "area_picker_label": "分區",
+                        "update_name_button": "更新名稱"
+                    },
+                    "add_device_page": {
+                        "header": "Zigbee 家庭自動化 - 新增裝置",
+                        "spinner": "正在搜尋 ZHA Zigbee 裝置...",
+                        "discovery_text": "所發現的裝置將會顯示於此。跟隨裝置的指示並將其設定為配對模式。"
                     }
                 },
                 "area_registry": {