.github/workflows/stale.yaml

@@ -14,7 +14,7 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - name: 🚀 Run stale
-        uses: actions/stale@v9.1.0
+        uses: actions/stale@v9.0.0
         with:
           repo-token: ${{ secrets.GITHUB_TOKEN }}
           days-before-stale: 14

.github/workflows/test.yml

@@ -23,7 +23,7 @@ jobs:
         with:
           fetch-depth: 2
       - name: Set up Python ${{ matrix.python-version }}
-        uses: actions/setup-python@v5.6.0
+        uses: actions/setup-python@v5.3.0
         with:
           python-version: ${{ matrix.python-version }}
       - name: Install dependencies

README.md

@@ -210,4 +210,4 @@ switch:
 ```
 
 # Reporting issues
-*Before* reporting issues please enable debug logging as described [here](https://www.home-assistant.io/docs/configuration/troubleshooting/#enabling-debug-logging), check logs and report issue attaching the log file and the relevant YAML section.
+*Before* reporting issues please enable debug logging as described [here](https://www.home-assistant.io/docs/configuration/troubleshooting/#enabling-debug-logging), check logs and report issue attaching the log file.

custom_components/rpi_gpio/binary_sensor.py

@@ -52,20 +52,17 @@ async def async_setup_platform(
 
     sensors = []
     for sensor in config.get(CONF_SENSORS):
-        try:
-            sensors.append(
-                GPIODBinarySensor(
-                    hub,
-                    sensor[CONF_NAME],
-                    sensor[CONF_PORT],
-                    sensor.get(CONF_UNIQUE_ID) or f"{DOMAIN}_{sensor[CONF_PORT]}_{sensor[CONF_NAME].lower().replace(' ', '_')}",
-                    sensor.get(CONF_INVERT_LOGIC),
-                    sensor.get(CONF_PULL_MODE),
-                    sensor.get(CONF_BOUNCETIME)
-                )
+        sensors.append(
+            GPIODBinarySensor(
+                hub,
+                sensor[CONF_NAME],
+                sensor[CONF_PORT],
+                sensor.get(CONF_UNIQUE_ID) or f"{DOMAIN}_{sensor[CONF_PORT]}_{sensor[CONF_NAME].lower().replace(' ', '_')}",
+                sensor.get(CONF_INVERT_LOGIC),
+                sensor.get(CONF_PULL_MODE),
+                sensor.get(CONF_BOUNCETIME)
             )
-        except Exception as e:
-            _LOGGER.error(f"Failed to add binary sensor {sensor[CONF_NAME]} for port {sensor[CONF_PORT]}: {e}")
+        )
 
     async_add_entities(sensors)
 

custom_components/rpi_gpio/cover.py

@@ -71,24 +71,21 @@ async def async_setup_platform(
     invert_relay = config[CONF_INVERT_RELAY]
     covers = []
     for cover in config.get(CONF_COVERS):
-        try:
-            covers.append(
-                GPIODCover(
-                    hub,
-                    cover[CONF_NAME],
-                    cover.get(CONF_RELAY_PIN),
-                    relay_time,
-                    invert_relay,
-                    "AS_IS",
-                    "PUSH_PULL",
-                    cover.get(CONF_STATE_PIN),
-                    state_pull_mode,
-                    invert_state,
-                    cover.get(CONF_UNIQUE_ID) or f"{DOMAIN}_{cover.get(CONF_RELAY_PIN)}_{cover[CONF_NAME].lower().replace(' ', '_')}",
-                )
+        covers.append(
+            GPIODCover(
+                hub,
+                cover[CONF_NAME],
+                cover.get(CONF_RELAY_PIN),
+                relay_time,
+                invert_relay,
+                "AS_IS",
+                "PUSH_PULL",
+                cover.get(CONF_STATE_PIN),
+                state_pull_mode,
+                invert_state,
+                cover.get(CONF_UNIQUE_ID) or f"{DOMAIN}_{cover.get(CONF_RELAY_PIN)}_{cover[CONF_NAME].lower().replace(' ', '_')}",
             )
-        except Exception as e:
-            _LOGGER.error(f"Failed to add cover {cover[CONF_NAME]} for port {cover.get(CONF_RELAY_PIN)}:{cover.get(CONF_STATE_PIN)}: {e}")
+        )
 
     async_add_entities(covers)
 

custom_components/rpi_gpio/hub.py

@@ -7,7 +7,7 @@ _LOGGER = logging.getLogger(__name__)
 
 from homeassistant.core import HomeAssistant
 from homeassistant.const import EVENT_HOMEASSISTANT_STOP, EVENT_HOMEASSISTANT_START
-from homeassistant.exceptions import HomeAssistantError,ServiceValidationError
+from homeassistant.exceptions import HomeAssistantError
 
 from typing import Dict
 from datetime import timedelta
@@ -73,7 +73,6 @@ class Hub:
         _LOGGER.debug(f"verify_gpiochip: {path} is a gpiochip_device")
         self._chip = gpiod.Chip(path)
         info = self._chip.get_info()
-        _LOGGER.debug(f"verify_gpiochip: {path} info is: {info}")
         if not "pinctrl" in info.label:
             _LOGGER.debug(f"verify_gpiochip: {path} no pinctrl {info.label}")
             return False
@@ -83,12 +82,10 @@ class Hub:
 
     def verify_port_ready(self, port: int):
         info = self._chip.get_line_info(port)
-        _LOGGER.debug(f"original port {port} info: {info}")
-        if info.used:
-            if info.consumer != DOMAIN:
-                raise HomeAssistantError(f"Port {port} already in use by {info.consumer}")
-            else:
-                raise HomeAssistantError(f"Port {port} already in use by another entity, check your config for duplicates port usage")
+        _LOGGER.debug(f"original port info: {info}")
+        if info.used and info.consumer != DOMAIN:
+            _LOGGER.error(f"Port {port} already in use by {info.consumer}")
+            raise HomeAssistantError(f"Port {port} already in use by {info.consumer}")
 
     @property
     def hub_id(self) -> str:
@@ -103,11 +100,11 @@ class Hub:
         line_request = self._chip.request_lines(
             consumer=DOMAIN,
             config={port: gpiod.LineSettings(
-                direction = Direction.OUTPUT,
-                bias = BIAS[bias],
-                drive = DRIVE[drive_mode],
-                active_low = active_low,
-                output_value = Value.ACTIVE if init_state is not None and init_state else Value.INACTIVE)})
+            direction = Direction.OUTPUT,
+            bias = BIAS[bias],
+            drive = DRIVE[drive_mode],
+            active_low = active_low,
+            output_value = Value.ACTIVE if init_state is not None and init_state else Value.INACTIVE)})
         _LOGGER.debug(f"add_switch line_request: {line_request}")
         return line_request
 
@@ -135,9 +132,9 @@ class Hub:
                 active_low = active_low,
                 debounce_period = timedelta(milliseconds=debounce),
                 event_clock = Clock.REALTIME)})
-        _LOGGER.debug(f"add_sensor line_request: {line_request}")
+
         current_is_on = True if line_request.get_value(port) == Value.ACTIVE else False
-        _LOGGER.debug(f"add_sensor current state: {current_is_on}")
+        _LOGGER.debug(f"add_sensor line_request: {line_request}. current state: {current_is_on}")
         return line_request, current_is_on
 
     def add_cover(self, relay_port, relay_active_low, relay_bias, relay_drive, 

custom_components/rpi_gpio/manifest.json

@@ -7,5 +7,5 @@
   "iot_class": "local_push",
   "issue_tracker": "https://github.com/thecode/ha-rpi_gpio/issues",
   "requirements": [ "gpiod>=2.2.1" ],
-  "version": "2025.2.1"
+  "version": "2024.12.2"
 }

custom_components/rpi_gpio/switch.py

@@ -56,21 +56,18 @@ async def async_setup_platform(
 
     switches = []
     for switch in config.get(CONF_SWITCHES):
-        try:
-            switches.append(
-                GPIODSwitch(
-                    hub,
-                    switch[CONF_NAME],
-                    switch[CONF_PORT],
-                    switch.get(CONF_UNIQUE_ID) or f"{DOMAIN}_{switch[CONF_PORT]}_{switch[CONF_NAME].lower().replace(' ', '_')}",
-                    switch.get(CONF_INVERT_LOGIC),
-                    switch.get(CONF_PULL_MODE),
-                    switch.get(CONF_DRIVE),
-                    switch[CONF_PERSISTENT]
-                )
+        switches.append(
+            GPIODSwitch(
+                hub,
+                switch[CONF_NAME],
+                switch[CONF_PORT],
+                switch.get(CONF_UNIQUE_ID) or f"{DOMAIN}_{switch[CONF_PORT]}_{switch[CONF_NAME].lower().replace(' ', '_')}",
+                switch.get(CONF_INVERT_LOGIC),
+                switch.get(CONF_PULL_MODE),
+                switch.get(CONF_DRIVE),
+                switch[CONF_PERSISTENT]
             )
-        except Exception as e:
-            _LOGGER.error(f"Failed to add switch {switch[CONF_NAME]} for port {switch[CONF_PORT]}: {e}")
+        )
 
     async_add_entities(switches)
 

requirements_lint.txt

@@ -1,7 +1,7 @@
-black==25.1.0
-flake8==7.3.0
-isort==6.0.1
-mypy==1.17.0
-pre-commit==4.2.0
+black==24.10.0
+flake8==7.1.1
+isort==5.13.2
+mypy==1.14.0
+pre-commit==4.0.1
 pydocstyle==6.3.0
-pylint==3.3.7
+pylint==3.3.2