diff --git a/source/_components/climate.evohome.markdown b/source/_components/climate.evohome.markdown
new file mode 100644
index 00000000000..a6c2444f2d6
--- /dev/null
+++ b/source/_components/climate.evohome.markdown
@@ -0,0 +1,28 @@
+---
+layout: page
+title: "Honeywell evohome CH/DHW Controller"
+description: "Instructions on how to integrate a Honeywell evohome controller with Home Assistant."
+date: 2018-09-25 12:00
+sidebar: true
+comments: false
+sharing: true
+footer: true
+logo: honeywell.png
+ha_category: Climate
+ha_release: 0.80
+ha_iot_class: "Cloud Polling"
+---
+
+The `evohome` climate platform integrates your _EU-based_ [Honeywell Connect Comfort](https://international.mytotalconnectcomfort.com/Account/Login) CH/DHW controller into Home Assistant, enabling control of its operating mode.
+
+It is related to the honeywell climate component](/components/climate.honeywell/), which allows limited integration with evohome Heating zones.  These two components should be usuable side-by-side, but YMMV.
+
+The evohome evotouch controller supports seven distict modes: Auto, AutoWithEco, Away, DayOff, HeatingOff, and Custom; AutoWithReset is a 7th, hidden, mode.
+
+Currently, only the standard HA operating modes are supported: 'Eco' (AutoWithEco), and 'Off' (HeatingOff), and 'Auto' (all other evohome modes). 'Away' (Away) mode is supported separately.
+
+The actual operating modes are tracked/reported via `device_state_attributes`.
+
+<p class='note'>
+Full configuration details can be found on the main [evohome component](/components/evohome/) page.
+</p>
diff --git a/source/_components/evohome.markdown b/source/_components/evohome.markdown
new file mode 100644
index 00000000000..6a69e5b7413
--- /dev/null
+++ b/source/_components/evohome.markdown
@@ -0,0 +1,55 @@
+---
+layout: page
+title: "Honeywell evohome"
+description: "Instructions on how to integrate Honeywell evohome devices with Home Assistant."
+date: 2018-09-25 12:00
+sidebar: true
+comments: false
+sharing: true
+footer: true
+logo: honeywell.png
+ha_category: Hub
+ha_release: 0.80
+ha_iot_class: "Cloud Polling"
+---
+
+The `evohome` platform is the main component to set up and integrate all supported evohome devices.
+
+It uses the [evohomeclient](https://pypi.org/project/evohomeclient/) client library and so will let you control (only) _EU-based_ [Honeywell Connect Comfort](https://international.mytotalconnectcomfort.com/Account/Login) systems.
+
+Currently, only Controllers are supported; support for Heating zones and DHW controllers will be added at a later time.
+
+It is related to the [honeywell](/components/climate.honeywell/) climate component, which allows limited integration with evohome Heating zones.  These two components should be usuable side-by-side, but YMMV.
+
+
+## {% linkable_title Configuration %}
+
+To use this component in your installation, add the following to your `configuration.yaml` file:
+
+```yaml
+# Example configuration.yaml entry
+evohome:
+  - username: YOUR_USERNAME
+    password: YOUR_PASSWORD
+    location_idx: 0
+```
+This is a IoT cloud-polling device, and the `scan_interval` is currently fixed at 3 minutes.  Testing has indicated that this is a safe interval that - by itself - shouldn't cause you to be rate-limited by Honeywell.
+
+
+### {% linkable_title Configuration variables %}
+
+{% configuration %}
+username:
+  description: The username (email address) that has access to [Honeywell Connect Comfort](https://international.mytotalconnectcomfort.com/Account/Login) web site.
+  required: true
+  type: string
+password:
+  description: The password corresponding to the above username.
+  required: true
+  type: string
+location_idx:
+  description: Used to select which location to use, if your login has access to more than one location.  Multiple locations are not supported.
+  required: false
+  type: int
+  default: 0
+{% endconfiguration %}