jeans/home-assistant.io
jeans/home-assistant.io
1
0
Fork 0
mirror of https://github.com/home-assistant/home-assistant.io.git synced 2025-07-21 08:16:53 +00:00
Code Issues Packages Projects Releases Wiki Activity

Add new sensors to airq integration (#26761)

Browse Source 
Co-authored-by: Franck Nijhof <frenck@frenck.nl>
This commit is contained in:
Renat Sibgatulin 2023-04-05 07:16:54 +00:00 committed by GitHub
parent ae4a491e90
commit 0456f07ed5
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
1 changed files with 24 additions and 3 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

27
source/_integrations/airq.markdown
View File

@ -25,43 +25,64 @@ During the configuration, the user is prompted for the IP address of the device
For this integration to communicate with the device, both must be connected to the same Wi-Fi network. For this integration to communicate with the device, both must be connected to the same Wi-Fi network.
After the setup, separate entities will be created for each of the sensors, found in your device.
## Sensors ## Sensors
Currently, the integration supports the following sensors: Currently, the integration supports the following sensors:
| Sensor name | Unit of measurement | | Sensor name | Unit of measurement |
|----------------------|---------------------| |----------------------|---------------------|
| Acetaldehyde | µg/m³ |
| Ammonia | µg/m³ | | Ammonia | µg/m³ |
| Arsine | µg/m³ |
| Bromine | µg/m³ |
| CH4S | µg/m³ |
| Chlorine | µg/m³ | | Chlorine | µg/m³ |
| ClO2 | µg/m³ |
| CO | mg/m³ | | CO | mg/m³ |
| CO2 | ppm | | CO2 | ppm |
| CS2 | µg/m³ |
| Dew Point | °C | | Dew Point | °C |
| Ethanol | µg/m³ | | Ethanol | µg/m³ |
| Ethylene | µg/m³ |
| Formaldehyde | µg/m³ | | Formaldehyde | µg/m³ |
| F2 | µg/m³ |
| H2S | µg/m³ | | H2S | µg/m³ |
| HCl | µg/m³ |
| HCN | µg/m³ |
| HF | µg/m³ |
| Health Index | % | | Health Index | % |
| Humidity (relative) | % | | Humidity (relative) | % |
| Absolute Humidity | g/m³ | | Absolute Humidity | g/m³ |
| Hydrogen | µg/m³ | | Hydrogen | µg/m³ |
| Hydrogen Peroxide | µg/m³ |
| Methane | % | | Methane | % |
| N2O | µg/m³ | | N2O | µg/m³ |
| NO | µg/m³ | | NO | µg/m³ |
| NO2 | µg/m³ | | NO2 | µg/m³ |
| Ozone | µg/m³ | | Organic Acid | ppb |
| Oxygen | µg/m³ | | Oxygen | µg/m³ |
| Ozone | µg/m³ |
| Performance Index | % | | Performance Index | % |
| PM1, PM25, PM10[^pm] | µg/m³ | | PH3 | µg/m³ |
| PM1, PM25, PM10 | µg/m³ |
| Pressure | hPa | | Pressure | hPa |
| Relative Pressure | hPa | | Relative Pressure | hPa |
| Propane | % | | Propane | % |
| Refrigerant | µg/m³ |
| SiH4 | µg/m³ |
| SO2 | µg/m³ | | SO2 | µg/m³ |
| Noise | dBa | | Noise | dBa |
| Noise (Maximum) | dBa | | Noise (Maximum) | dBa |
| Radon | Bq/m³ | | Radon | Bq/m³ |
| Temperature | °C | | Temperature | °C |
| Virus Index | % |
| VOC | ppb | | VOC | ppb |
| VOC (Industrial) | ppb | | VOC (Industrial) | ppb |
PM1, PM25, and PM10 correspond to concentrations of particulates with diameter less than 1µm, 2.5µm, and 10µm respectively PM1, PM25, and PM10 correspond to concentrations of particulates with diameter less than 1µm, 2.5µm, and 10µm respectively
After the setup, separate entities will be created for each of the aforementioned sensors, found in your device. Virus Index uses CO2 as a proxy for potential aerosol load and can be seen as an indicator of ventilation sufficiency (0 %: insufficient ventilation, 100 %: all fine).
Virtual sensors "Relative Pressure" and "Virus Index" are introduced in firmware v1.80.0 but deactivated by default. You can activate them in the air-Q mobile application under "Advanced settings".