diff --git a/source/_integrations/pegel_online.markdown b/source/_integrations/pegel_online.markdown
index 5668943799a..dfcfa9e3065 100644
--- a/source/_integrations/pegel_online.markdown
+++ b/source/_integrations/pegel_online.markdown
@@ -1,6 +1,6 @@
 ---
 title: PEGELONLINE
-description: Instructions on how to integrate Radarr sensors with Home Assistant
+description: Instructions on how to integrate PEGELONLINE measurements into Home Assistant.
 ha_category:
   - Environment
   - Sensor
@@ -15,6 +15,21 @@ ha_codeowners:
 ha_integration_type: service
 ---
 
-This integration uses the data from the German Federal Waterways and Shipping Administration (_Wasserstraßen- und Schifffahrtsverwaltung des Bundes_) [PEGELONLINE](https://www.pegelonline.wsv.de/) to provide water level sensors.
+This integration uses the data from the German Federal Waterways and Shipping Administration (_Wasserstraßen- und Schifffahrtsverwaltung des Bundes_) [PEGELONLINE](https://www.pegelonline.wsv.de/) to provide different [sensors](#sensors), based on the available data of the selected measurement station.
 
 {% include integrations/config_flow.md %}
+
+## Sensors
+
+Currently, the integration supports the following sensors:
+
+| Sensor name | Common unit of measurement |
+| --- | --- |
+| Air temperature | °C |
+| Clearance height (_only for bridges_) | cm |
+| Oxygen level | mg/l |
+| pH | `None` |
+| Water flow speed | m/s |
+| Water level | cm |
+| Water temperature | °C |
+| Water volume flow | m³/s |