Added documentation gesture support Deconz (#11671)

source/_integrations/deconz.markdown

@@ -103,7 +103,7 @@ Note: deCONZ automatically signals Home Assistant when new sensors are added, bu
 
 ## Remote control devices
 
-Remote controls (ZHASwitch category) will not be exposed as regular entities, but as events named `deconz_event` with a payload of `id` and `event`. Id will be the device name from deCONZ and Event will be the momentary state of the switch. However, a sensor entity will be created that shows the battery level of the switch as reported by deCONZ, named sensor.device_name_battery_level.
+Remote controls (ZHASwitch category) will not be exposed as regular entities, but as events named `deconz_event` with a payload of `id` and `event` and in case of the Aqara Magic Cube also `gesture`. Id will be the device name from deCONZ and Event will be the momentary state of the switch. Gesture is used for some Aqara Magic Cube specific events like: flip 90 degrees, flip 180 degrees, clockwise and counter clockwise rotation. However, a sensor entity will be created that shows the battery level of the switch as reported by deCONZ, named sensor.device_name_battery_level.
 
 Typical values for switches, the event codes are 4 numbers where the first and last number are of interest here.
 
@@ -118,6 +118,20 @@ Where for example on a Philips Hue Dimmer, 2001 would be holding the dim up butt
 
 For the IKEA Tradfri remote the first digit equals, 1 for the middle button, 2 for up, 3 for down, 4 for left, and 5 for right (e.g., "event: 1002" for middle button short release).
 
+Specific gestures for the Aqara Magic Cube are:
+
+| Gesture | Description |
+|---------|-------------|
+| 0 | Awake |
+| 1 | Shake |
+| 2 | Free fall |
+| 3 | Flip 90 |
+| 4 | Flip 180 |
+| 5 | Move on any side |
+| 6 | Double tap on any side |
+| 7 | Turn clockwise |
+| 8 | Turn counter clockwise |
+
 ### Finding your events
 
 Navigate to **Developer tools->Events**. In the section **Listen to events** add `deconz_event` and press **START LISTENING**. All events from deCONZ will now be shown and by pushing your remote button while monitoring the log it should be fairly easy to find the events you are looking for.
@@ -139,6 +153,7 @@ Currently supported devices as device triggers:
 - Aqara Mini Switch
 - Aqara Round Switch
 - Aqara Square Switch
+- Aqara Magic Cube
 
 #### Requesting support for new device trigger
 
@@ -197,6 +212,18 @@ automation:
           brightness: >
             {% set bri = state_attr('light.lamp', 'brightness') | int %}
             {{ [bri-30, 0] | max }}
+
+  - alias: 'Turn lamp on when turning cube clockwise'
+    initial_state: 'on'
+    trigger:
+      platform: event
+      event_type: deconz_event
+      event_data:
+        id: remote_control_1
+        gesture: 7
+    action:
+      service: light.turn_on
+      entity_id: light.lamp
 ```
 
 {% endraw %}
@@ -445,7 +472,6 @@ The `entity_id` name will be `sensor.device_name`, where `device_name` is define
   - Philips Hue Motion Sensor
   - IKEA Trådfri Remote
   - Philips Hue Dimmer Switch
-  - Xiaomi Cube
   - Xiaomi Aqara Smart Light Switch
   - Xiaomi Aqara Smart Wireless Switch
   - Xiaomi Smart Home Wireless Switch