Add zha radio_type (#4586)

Adds support for XBee radios, which requires setting `radio_type` in the zha config.
This commit is contained in:
Russell Cloran 2018-02-09 13:55:13 -08:00 committed by Franck Nijhof
parent a854b89b59
commit 0b49ea80bf

View File

@ -26,6 +26,7 @@ There is currently support for the following device types within Home Assistant:
Known working ZigBee radios:
- Nortek/GoControl Z-Wave & Zigbee USB Adaptor - Model HUSBZB-1
- XBee Series 2C
To configure the component, a `zha` section must be present in the `configuration.yaml`,
and the path to the serial device for the radio and path to the database which will persist your network data is required.
@ -39,7 +40,9 @@ zha:
Configuration variables:
- **radio_type** (*Optional*): One of `ezsp` (default) or `xbee`
- **usb_path** (*Required*): Path to the serial device for the radio.
- **baud_rate** (*Optional*): Baud rate of the serial device.
- **database_path** (*Required*): Path to the database which will keep persistent network data.
To add new devices to the network, call the `permit` service on the `zha` domain, and then follow the device instructions for doing a scan or factory reset. In case you want to add Philips Hue bulbs that have previously been added to another bridge, have a look at: [https://github.com/vanviegen/hue-thief/](https://github.com/vanviegen/hue-thief/)