Merge branch 'current' into next

source/_components/dialogflow.markdown

@@ -43,7 +43,9 @@ To get the webhook URL, go to the integrations page in the configuration screen
 - Click on "Create Agent"
 - Select name, language (if you are planning to use Google Actions check their [supported languages](https://support.google.com/assistant/answer/7108196?hl=en)) and time zone
 - Click "Save"
-- Go to "Fulfillment" (in the left menu)
+- Go to project settings (cog symbol in left menu)
+- under "API VERSION" click on "V1 API"
+- Now go to "Fulfillment" (in the left menu)
 - Enable Webhook and set your Dialogflow webhook url as the endpoint, e.g., `https://myhome.duckdns.org/api/webhook/800b4cb4d27d078a8871656a90854a292651b20635685f8ea23ddb7a09e8b417`
 - Click "Save"
 - Create a new intent

source/_docs/authentication.markdown

@@ -86,6 +86,8 @@ While you should hopefully be storing your passwords in a password manager, if y
 * `auth`
 * `auth_provider.homeassistant`
 * `onboarding`
+* `hassio` (for hassio users)
+* `cloud` (for nabucasa users)
 
 When you start Home Assistant next, you'll be required to set up authentication again.
 

source/_docs/z-wave/device-specific.markdown

@@ -45,6 +45,8 @@ Turn on "Disco lights":
 $ echo -e -n "\x01\x08\x00\xF2\x51\x01\x01\x05\x01\x50" > /dev/serial/by-id/usb-0658_0200-if00
 ```
 
+If the above two commands give errors about not having that device, you should try replacing the `/dev/serial/by-id/usb-0658_0200-if00` with `/dev/ttyACM0` or `/dev/ttyACM1` (depending on which tty your aeotec stick is addressed to).  
+
 ### {% linkable_title Razberry Board %}
 
 You need to disable the on-board Bluetooth since the board requires the use of the hardware UART (and there's only one on the Pi3). You do this by adding the following to the end of `/boot/config.txt`:
@@ -298,6 +300,8 @@ Press circle and plus simultaneously to wake up the device.
 
 <!-- from https://products.z-wavealliance.org/products/2817 -->
 
+Once you've added the NanoMote to your z-wave network, you'll need to update your zwcfg*.xml file with the below xml data.  Stop Home Assistant and open your zwcfg*.xml file (located in your config folder).  Find the NanoMote device section and then its corresponding `CommandClass` section with id="91".  Replace the entire CommandClass section with the below xml data.  Save the file and restart Home Assistant.  
+
 ```xml
     <CommandClass id="91" name="COMMAND_CLASS_CENTRAL_SCENE" version="1" request_flags="4" innif="true" scenecount="0">
         <Instance index="1" />