diff --git a/source/_components/climate.evohome.markdown b/source/_components/climate.evohome.markdown index a6c2444f2d6..bd1b562302e 100644 --- a/source/_components/climate.evohome.markdown +++ b/source/_components/climate.evohome.markdown @@ -1,7 +1,7 @@ --- layout: page -title: "Honeywell evohome CH/DHW Controller" -description: "Instructions on how to integrate a Honeywell evohome controller with Home Assistant." +title: "Honeywell evohome/TCC Climate devices" +description: "Instructions on how to utilize a Honeywell evohome/TCC system within Home Assistant." date: 2018-09-25 12:00 sidebar: true comments: false @@ -13,15 +13,36 @@ ha_release: 0.80 ha_iot_class: "Cloud Polling" --- -The `evohome` climate platform integrates your _EU-based_ [Honeywell Connect Comfort](https://international.mytotalconnectcomfort.com/Account/Login) CH/DHW controller into Home Assistant, enabling control of its operating mode. +The `evohome` climate platform integrates your _non-US_ [Honeywell Total Connect Comfort (TCC)](https://international.mytotalconnectcomfort.com/Account/Login) system into Home Assistant. It has been tested with the Honeywell evohome multi-zone CH/DHW system, but other systems may also work. -It is related to the honeywell climate component](/components/climate.honeywell/), which allows limited integration with evohome Heating zones. These two components should be usuable side-by-side, but YMMV. +It is distinct from - but related to - the [`honeywell`](/components/climate.honeywell/) climate platform, which also allows (limited) integration with Honeywell Connected thermostats; these two components may well be usable side-by-side, but YMMV. -The evohome evotouch controller supports seven distict modes: Auto, AutoWithEco, Away, DayOff, HeatingOff, and Custom; AutoWithReset is a 7th, hidden, mode. +The evohome evotouch Controller supports seven distict operating modes: Auto, AutoWithEco, Away, DayOff, HeatingOff, and Custom; AutoWithReset is a 7th, hidden, mode. -Currently, only the standard HA operating modes are supported: 'Eco' (AutoWithEco), and 'Off' (HeatingOff), and 'Auto' (all other evohome modes). 'Away' (Away) mode is supported separately. +Currently, only the standard HA operating modes are supported; the evohome modes are mapped thus: 'Eco' (AutoWithEco), 'Off' (HeatingOff), and 'Auto' (all other evohome modes). 'Away' mode is supported separately, in the HA fashion. -The actual operating modes are tracked/reported via `device_state_attributes`. +The evohome Heating zones support only three operating modes: FollowSchedule, TemporaryOverride, and PermanentOverride. If the zone is in FollowSchedule mode, it inherits its `operating_mode` from the controller; the other modes are mapped to 'Manual' or 'Off'. + +A device's actual operating mode can be tracked via its `device_state_attributes`, which includes a JSON data structure for current state called `status`. For example: +``` +{ + 'zoneId': '999999', + 'temperatureStatus': { + 'temperature': 21.5, + 'isAvailable': True + }, + 'activeFaults': [], + 'setpointStatus': { + 'targetHeatTemperature': 17.5, + 'setpointMode': 'FollowSchedule' + }, + 'name': 'Main Room' +} +``` +This data can be accessed in automations, etc., via a value template: +``` +value_template: "{{ state_attr('climate.main_room', 'status').setpointStatus.setpointMode }}" +```

Full configuration details can be found on the main [evohome component](/components/evohome/) page. diff --git a/source/_components/climate.honeywell.markdown b/source/_components/climate.honeywell.markdown index bb174d8f5c8..a517334566a 100644 --- a/source/_components/climate.honeywell.markdown +++ b/source/_components/climate.honeywell.markdown @@ -14,13 +14,15 @@ ha_iot_class: "Cloud Polling" --- -The `honeywell` climate platform let you control [Honeywell Connected](http://getconnected.honeywell.com/en/) thermostats from Home Assistant. +The `honeywell` climate platform let you control Honeywell Connected thermostats from Home Assistant.

-This platform does NOT connect to MyTotalConnectComfort.com. If you have a Honeywell WIFI thermostat that is connected through MyTotalConnectComfort.com, you may might to take a look at the IFTTT component which can bridge the gap between Home Assistant and MyTotalConnectComfort.com WIFI thermostats on a limited basis. +This platform is actually a hybrid combination of two distinct climate systems based upon either [somecomfort](https://github.com/kk7ds/somecomfort) (for US-based systems), or [evohome-client](https://github.com/watchforstock/evohome-client) (for international/EU systems) - see the `region` parameter, below. Before you proceed, please be clear which client library is appropriate to your system.

-To set it up, add the following information to your `configuration.yaml` file: +Although both regions remain supported here, the `evohome-client`-based systems have a new [component](/components/evohome/) available that may suit your needs better. + +To set up this climate platform, add the following information to your `configuration.yaml` file: ```yaml climate: @@ -30,7 +32,7 @@ climate: scan_interval: 600 ```

-Scan interval is expressed in seconds. Omitting scan_interval may result in too-frequent polling and cause you to rate-limited by Honeywell. +Scan interval is expressed in seconds. Omitting or mis-configuring `scan_interval` may result in too-frequent polling and cause you to be rate-limited by Honeywell.

{% configuration %} @@ -43,7 +45,7 @@ password: required: true type: string region: - description: Region identifier (either 'eu' or 'us'). + description: Region identifier (either 'eu' or 'us'). Use the `somecomfort` client library for `us`, and evohome-client for `eu`. required: false default: eu type: string diff --git a/source/_components/evohome.markdown b/source/_components/evohome.markdown index 446ebd3334b..c789e2bda5d 100644 --- a/source/_components/evohome.markdown +++ b/source/_components/evohome.markdown @@ -1,7 +1,7 @@ --- layout: page -title: "Honeywell evohome" -description: "Instructions on how to integrate Honeywell evohome devices with Home Assistant." +title: "Honeywell evohome/TCC systems" +description: "Instructions on how to integrate a Honeywell evohome/TCC system with Home Assistant." date: 2018-09-25 12:00 sidebar: true comments: false @@ -13,11 +13,11 @@ ha_release: 0.80 ha_iot_class: "Cloud Polling" --- -The `evohome` platform is the main component to set up and integrate all supported evohome Climate devices. +The `evohome` component is the main component to set up and integrate all _non-US_ [Honeywell Total Connect Comfort (TCC)](https://international.mytotalconnectcomfort.com/Account/Login) CH/DHW systems, primarily the Honeywell evohome multi-zone CH/DHW system. It does not support the home security functionality of TCC. -It uses the [evohomeclient](https://pypi.org/project/evohomeclient/) client library and so will let you control (only) _EU-based_ [Honeywell Connect Comfort](https://international.mytotalconnectcomfort.com/Account/Login) systems. +It uses v2 of the [evohome-client](https://github.com/watchforstock/evohome-client) client library and so will let you control (only) EU/international systems. It _does not_ leverage the [somecomfort](https://github.com/kk7ds/somecomfort) client library as used by US-based systems; for those, you may find what you need at the [honeywell climate platform](/components/climate.honeywell/). -Currently, only Controllers and Zones are supported; support for DHW controllers will be added at a later time. More information is available [evohome climate component](/components/climate.honeywell/) page. +Currently, only Controllers and Heating zones are supported; support for DHW controllers will be added at a later time. More information is available on the [evohome climate platform](/components/climate.evohome/) page. ## {% linkable_title Configuration %} @@ -30,11 +30,9 @@ evohome: password: YOUR_PASSWORD ``` -This is an IoT cloud-polling device, and the `scan_interval` is currently fixed at 5 minutes. Testing has indicated that this is a safe interval that - by itself - shouldn't cause you to be rate-limited by Honeywell. - {% configuration %} username: - description: The username (email address) that has access to [Honeywell Connect Comfort](https://international.mytotalconnectcomfort.com/Account/Login) web site. + description: The username (email address) that has access to [Honeywell TCC](https://international.mytotalconnectcomfort.com/Account/Login) web site. required: true type: string password: @@ -42,8 +40,16 @@ password: required: true type: string location_idx: - description: Used to select which location to use, if your login has access to more than one location. Multiple locations are not supported. + description: Used to select which location to use, if your login has access to more than one location. Multiple locations at one time are not supported. required: false type: int default: 0 +scan_interval: + description: How often updates are retreived from Honeywell's web servers. The minimum value is 180 seconds, rounded up to the nearest minute. + required: false + type: int + default: 300 {% endconfiguration %} + +This is an IoT cloud-polling device, and the recommended minimum `scan_interval` is 300 seconds. Testing has indicated that this is a safe interval that - by itself - shouldn't cause you to be rate-limited by Honeywell. +