Grammatical (#24396)

Co-authored-by: Franck Nijhof <frenck@frenck.nl>
This commit is contained in:
Eirik Z 2022-10-06 20:12:26 +02:00 committed by GitHub
parent db46d9a701
commit 0f0b4d5f06
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23

View File

@ -19,35 +19,34 @@ Integrates [Nobø Ecohub](https://www.glendimplex.no/produkter/varmestyring/1112
into Home Assistant. This integration is not officially supported or endorsed by Glen Dimplex Nordic AS,
and the authors/maintainers are not official partners of Glen Dimplex Nordic AS.
To configure the integration, you need the 3 last digits of the serial number of your hub. These are located
on the back of the hub. If the hub is on a different local network than Home Assistant, you also need the
IP address of the hub.
To configure the integration, you need the 3 last digits of the serial number of your hub. The serial number is located
on the back of the hub. If the hub is on a different network than Home Assistant (i.e., IoT VLAN or another routable network from Home Assistant), you also need to provide the IP address of the hub.
{% include integrations/config_flow.md %}
## Operation modes
As for now you can see and change operation and preset for zones and set eco/comfort temperatures if you have
Currently, you can see and change operation and preset for zones and set eco/comfort temperatures if you have
a supported thermostat.
The possible operation modes are as follows:
- "Auto" - In this mode, the zone is in the normal setting and preset shows which state the zone is in right now
- "Auto" - In this mode, the zone is in the default setting and preset shows which state the zone is in right now
(according to calendar setup).
- "Heat" - In this mode the zone in the override setting and in the state selected by preset ("Away", "Eco"
- "Heat" - In this mode the zone is overridden and in the state selected by the preset ("Away", "Eco"
or "Comfort").
This can be utilized the following ways:
- Changing preset to "Away", "Eco", or "Comfort" will automatically change operation to "Heat".
- Changing preset to "Away", "Eco", or "Comfort" will automatically change operation mode to "Heat".
- Changing preset to none will automatically change operation to "Auto" and update preset.
- Changing operation to "Auto" will automatically update preset.
- Changing operation to "Heat" will set preset to "Comfort".
### No preset "Off"
Nobø heaters does not support preset "Off". This is not a limitation in the integration, but a safety mechanism in the
Nobø system (maybe they don't want you to accidentally turn off all your heaters and get frozen pipes). "Away"
temperature is fixed to 7°C and cannot be altered. On/off receivers will be off when the zone is in "Away" status.
Nobø heaters does not support preset "Off". This is not a limitation of the integration, but a safety mechanism in the
Nobø system (perhaps related to frozen pipes due to frost in Nordic regions).
"Away" temperature is fixed to 7°C and cannot be altered. On/off receivers will be off when the zone is in "Away" status.
For more information, see the [Nobø Ecohub manual](https://help.nobo.no/en/user-manual/before-you-start/what-is-a-weekly-program/).