From 0f7c1ac1680a83ab5446bc09fdf4edfbd7db403d Mon Sep 17 00:00:00 2001 From: Duco Sebel <74970928+DCSBL@users.noreply.github.com> Date: Tue, 24 Jun 2025 14:08:12 +0200 Subject: [PATCH] Add documentation on how to setup kWh Meter in HomeWizard (#39654) Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> --- source/_integrations/homewizard.markdown | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) diff --git a/source/_integrations/homewizard.markdown b/source/_integrations/homewizard.markdown index 22ff31ee34b..e4ca1684112 100644 --- a/source/_integrations/homewizard.markdown +++ b/source/_integrations/homewizard.markdown @@ -39,7 +39,13 @@ Integration for the [HomeWizard Energy](https://www.homewizard.com) platform. It You have to enable the local API to allow Home Assistant to communicate with your device. Do this in the HomeWizard Energy app: {% tip %} -You can skip this step if you are configuring your Wi-Fi P1 Meter with firmware version 6 or higher, or your Plug-In Battery. These products use a different authentication method that doesn't require enabling the local API. +You can skip this step if you are configuring one of the following devices: + +- Wi-Fi P1 Meter with firmware version 6 or higher +- Wi-Fi kWh Meter with firmware version 5 or higher +- Plug-In Battery + +These products use a different authentication method that doesn't require enabling the local API. {% endtip %} 1. Go to Settings (gear icon in the upper-right). @@ -183,8 +189,9 @@ It may happen that you can't find your devices or they won't show up in the inte 1. During setup, you may be asked to press a button on your device to authenticate it with Home Assistant. - **P1 Meter**: Press the white button on the front of the P1 Meter. - - **Plug-In Battery**: Press the black touch button on the front of the device. You will hear a beep. - - **Energy Socket**, **Water Meter** and **kWh Meter**: they do not require this step. + - **Plug-In Battery**: Press the black touch button on the front of the device. You will hear a beep. + - **kWh Meter**: Press and hold the button with the Wi‑Fi icon for two seconds. Release the button before the display shows "AP". + - **Energy Socket** and **Water Meter**: they do not require this step. 2. After pressing the button, you must select **Continue** within 30 seconds to complete the setup. - If the setup times out, you may need to press the button again.