🚜 Merges/Redirect ADS component pages (#8548)

source/_components/ads.markdown

@@ -8,13 +8,30 @@ comments: false
 sharing: true
 footer: true
 logo: beckhoff.png
-ha_category: Hub
+ha_category:
+  - Hub
+  - Binary Sensor
+  - Light
+  - Sensor
+  - Switch
 ha_release: "0.60"
 ha_iot_class: "Local Push"
+redirect_from:
+  - /components/binary_sensor.ads/
+  - /components/light.ads/
+  - /components/sensor.ads/
+  - /components/switch.ads/
 ---
 
 The ADS (automation device specification) describes a device-independent and fieldbus independent interface for communication between [Beckhoff](https://www.beckhoff.com/) automation devices running [TwinCAT](http://www.beckhoff.hu/english.asp?twincat/default.htm) and other devices implementing this interface.
 
+There is currently support for the following device types within Home Assistant:
+
+- [Binary Sensor](#binary-sensor)
+- [Light](#light)
+- [Sensor](#sensor)
+- [Switch](#switch)
+
 ## {% linkable_title Configuration %}
 
 To enable ADS, add the following lines to your `configuration.yaml` file:
@@ -58,3 +75,126 @@ Service parameters:
 - **adsvar**: Name of the variable on the ADS device. To access global variables on *TwinCAT2* use a prepending dot `.myvariable`, for TwinCAT3 use `GBL.myvariable`.
 - **adstype**: Specify the type of the variable. Use one of the following: `int`, `byte`, `uint`, `bool`
 - **value**: The value that will be written in the variable.
+
+## {% linkable_title Binary Sensor %}
+
+The `ads` binary sensor platform can be used to monitor a boolean value on your ADS device.
+
+To use your ADS device, you first have to set up your [ADS hub](/components/ads/) and then add the following to your `configuration.yaml`
+file:
+
+```yaml
+# Example configuration.yaml entry
+binary_sensor:
+  - platform: ads
+    adsvar: .boolean1
+```
+
+{% configuration %}
+adsvar:
+  description: The name of the variable which you want to access on the ADS device.
+  required: true
+  type: string
+name:
+  description: An identifier for the light in the frontend.
+  required: false
+  type: string
+device_class:
+  description: The [type/class](/components/binary_sensor/) of the sensor to set the icon in the frontend.
+  required: false
+  type: string
+{% endconfiguration %}
+
+## {% linkable_title Light %}
+
+The `ads` light platform allows you to control your connecte ADS lights.
+
+To use your ADS device, you first have to set up your [ADS hub](/components/ads/) and then add the following to your `configuration.yaml`
+file:
+
+```yaml
+# Example configuration.yaml entry
+light:
+  - platform: ads
+    adsvar: GVL.enable_light
+    adsvar_brightness: GVL.brightness
+```
+
+{% configuration %}
+adsvar:
+  required: true
+  description: The name of the boolean variable that switches the light on
+  type: string
+adsvar_brightness:
+  required: false
+  description: The name of the variable that controls the brightness, use an unsigned integer on the PLC side
+  type: integer
+name:
+  required: false
+  description: An identifier for the Light in the frontend
+  type: string
+{% endconfiguration %}
+
+## {% linkable_title Sensor %}
+
+The `ads` sensor platform allows reading the value of a numeric variable on your ADS device. The variable can be of type *INT*, *UINT* or *BYTE*.
+
+To use your ADS device, you first have to set up your [ADS hub](/components/ads/) and then add the following to your `configuration.yaml`
+file:
+
+```yaml
+# Example configuration.yaml entry
+sensor:
+  - platform: ads
+    adsvar: GVL.temperature
+    unit_of_measurement: '°C'
+    adstype: integer
+```
+
+{% configuration %}
+adsvar:
+  required: true
+  description: The name of the variable which you want to access.
+  type: string
+adstype:
+  required: false
+  description: The datatype of the ADS variable, possible values are int, uint, byte.
+  default: int
+  type: string
+name:
+  required: false
+  description: An identifier for the sensor.
+  type: string
+factor:
+  required: false
+  description: A factor that divides the stored value before displaying in Home Assistant.
+  default: 1
+  type: integer
+{% endconfiguration %}
+
+The *factor* can be used to implement fixed decimals. E.g., set *factor* to 100 if you want to display a fixed decimal value with two decimals. A variable value of `123` will be displayed as `1.23`.
+
+## {% linkable_title Switch %}
+
+The `ads` switch platform accesses a boolean variable on the connected ADS device. The variable is identified by its name.
+
+To use your ADS device, you first have to set up your [ADS hub](/components/ads/) and then add the following to your `configuration.yaml`
+file:
+
+```yaml
+# Example configuration.yaml entry
+switch:
+  - platform: ads
+    adsvar: .global_bool
+```
+
+{% configuration %}
+adsvar:
+  required: true
+  description: The name of the variable which you want to access on the ADS device.
+  type: string
+name:
+  required: false
+  description: An identifier for the switch in the frontend.
+  type: string
+{% endconfiguration %}

source/_components/binary_sensor.ads.markdown

@@ -1,41 +0,0 @@
----
-layout: page
-title: "ADS Binary Sensor"
-description: "Instructions on how to set up ADS binary sensors within Home Assistant."
-date: 2017-10-25 10:00
-sidebar: true
-comments: false
-sharing: true
-footer: true
-logo: beckhoff.png
-ha_category: Binary Sensor
-ha_release: "0.60"
-ha_iot_class: "Local Push"
----
-
-The `ads` binary sensor platform can be used to monitor a boolean value on your ADS device.
-
-To use your ADS device, you first have to set up your [ADS hub](/components/ads/) and then add the following to your `configuration.yaml`
-file:
-
-```yaml
-# Example configuration.yaml entry
-binary_sensor:
-  - platform: ads
-    adsvar: .boolean1
-```
-
-{% configuration %}
-adsvar:
-  description: The name of the variable which you want to access on the ADS device.
-  required: true
-  type: string
-name:
-  description: An identifier for the light in the frontend.
-  required: false
-  type: string
-device_class:
-  description: The [type/class](/components/binary_sensor/) of the sensor to set the icon in the frontend.
-  required: false
-  type: string
-{% endconfiguration %}

source/_components/light.ads.markdown

@@ -1,42 +0,0 @@
----
-layout: page
-title: "ADS Light"
-description: Instructions on how to set up ADS lights within Home Assistant
-date: 2017-10-25 10:00
-sidebar: true
-comments: false
-sharing: true
-footer: true
-logo: beckhoff.png
-ha_category: Light
-ha_release: "0.60"
-ha_iot_class: "Local Push"
----
-
-The `ads` light platform allows you to control your connecte ADS lights.
-
-To use your ADS device, you first have to set up your [ADS hub](/components/ads/) and then add the following to your `configuration.yaml`
-file:
-
-```yaml
-# Example configuration.yaml entry
-light:
-  - platform: ads
-    adsvar: GVL.enable_light
-    adsvar_brightness: GVL.brightness
-```
-
-{% configuration %}
-  adsvar:
-    required: true
-    description: The name of the boolean variable that switches the light on
-    type: string
-  adsvar_brightness:
-    required: false
-    description: The name of the variable that controls the brightness, use an unsigned integer on the PLC side
-    type: integer
-  name:
-    required: false
-    description: An identifier for the Light in the frontend
-    type: string
-{% endconfiguration %}

source/_components/sensor.ads.markdown

@@ -1,51 +0,0 @@
----
-layout: page
-title: "ADS Sensor"
-description: "Instructions on how to integrate ADS numeric values into Home Assistant."
-date: 2017-10-25 10:00
-sidebar: true
-comments: false
-sharing: true
-footer: true
-logo: beckhoff.png
-ha_category: Sensor
-ha_release: "0.60"
-ha_iot_class: "Local Push"
----
-
-The `ads` sensor platform allows reading the value of a numeric variable on your ADS device. The variable can be of type *INT*, *UINT* or *BYTE*.
-
-To use your ADS device, you first have to set up your [ADS hub](/components/ads/) and then add the following to your `configuration.yaml`
-file:
-
-```yaml
-# Example configuration.yaml entry
-sensor:
-  - platform: ads
-    adsvar: GVL.temperature
-    unit_of_measurement: '°C'
-    adstype: integer
-```
-
-{% configuration %}
-  adsvar:
-    required: true
-    description: The name of the variable which you want to access.
-    type: string
-  adstype:
-    required: false
-    description: The datatype of the ADS variable, possible values are int, uint, byte.
-    default: int
-    type: string
-  name:
-    required: false
-    description: An identifier for the sensor.
-    type: string
-  factor:
-    required: false
-    description: A factor that divides the stored value before displaying in Home Assistant.
-    default: 1
-    type: integer
-{% endconfiguration %}
-
-The *factor* can be used to implement fixed decimals. E.g., set *factor* to 100 if you want to display a fixed decimal value with two decimals. A variable value of `123` will be displayed as `1.23`.

source/_components/switch.ads.markdown

@@ -1,37 +0,0 @@
----
-layout: page
-title: "ADS Switch"
-description: "Instructions on how to set up ADS switches within Home Assistant."
-date: 2017-10-25 10:00
-sidebar: true
-comments: false
-sharing: true
-footer: true
-logo: beckhoff.png
-ha_category: Switch
-ha_release: "0.60"
-ha_iot_class: "Local Push"
----
-
-The `ads` switch platform accesses a boolean variable on the connected ADS device. The variable is identified by its name.
-
-To use your ADS device, you first have to set up your [ADS hub](/components/ads/) and then add the following to your `configuration.yaml`
-file:
-
-```yaml
-# Example configuration.yaml entry
-switch:
-  - platform: ads
-    adsvar: .global_bool
-```
-
-{% configuration %}
-  adsvar:
-    required: true
-    description: The name of the variable which you want to access on the ADS device.
-    type: string
-  name: 
-    required: false
-    description: An identifier for the switch in the frontend.
-    type: string
-{% endconfiguration %}