diff --git a/source/_integrations/emulated_roku.markdown b/source/_integrations/emulated_roku.markdown index fc3191d6329..44ed3edd615 100644 --- a/source/_integrations/emulated_roku.markdown +++ b/source/_integrations/emulated_roku.markdown @@ -99,7 +99,7 @@ Available key codes | `Back` `InstantReplay` `Info` -`Backspace` +`BackSpace` `Search` `Enter` diff --git a/source/_integrations/lacrosse.markdown b/source/_integrations/lacrosse.markdown index 71e79869386..9fc659a7431 100644 --- a/source/_integrations/lacrosse.markdown +++ b/source/_integrations/lacrosse.markdown @@ -31,6 +31,10 @@ Or, when using Docker containers: docker exec -it pylacrosse -d /dev/ttyUSB0 scan ``` +If you are using the Home Assistant OS or Supervised installation method, these +methods are not available for you. The use of an additional computer to figure +out the ID is advised. + For TX 29 DTH-IT sensors you can also read the ID from the display and calculate the ID as followed: `hex2dec(ID_on_display) / 4`. ## Configuration diff --git a/source/_integrations/mystrom.markdown b/source/_integrations/mystrom.markdown index 133c80e60c2..847fcca8044 100644 --- a/source/_integrations/mystrom.markdown +++ b/source/_integrations/mystrom.markdown @@ -188,21 +188,6 @@ name: default: myStrom Switch {% endconfiguration %} -Check if you are able to access the device located at `http://IP_ADRRESS`. The details about your switch is provided as a JSON response. - -```bash -$ curl -X GET -H "Content-Type: application/json" http://IP_ADDRESS/report -{ - "power": 0, - "relay": false -} -``` - -or change its state: - -```bash -curl -G -X GET http://IP_ADDRESS/relay -d 'state=1' -``` ### Get the current power consumption diff --git a/source/_integrations/rainmachine.markdown b/source/_integrations/rainmachine.markdown index 04f8a75ce5b..d213b70f4ad 100644 --- a/source/_integrations/rainmachine.markdown +++ b/source/_integrations/rainmachine.markdown @@ -38,7 +38,6 @@ Disable a RainMachine program. This will mark the program switch as | Service Data Attribute | Optional | Description | |---------------------------|----------|-------------------------------------------------------------| | `program_id ` | no | The program to disable | -| `entity_id` | yes | An entity belonging to the RainMachine controller to adjust | ### `rainmachine.disable_zone` @@ -48,7 +47,6 @@ Disable a RainMachine zone. This will mark the zone switch as | Service Data Attribute | Optional | Description | |---------------------------|----------|-------------------------------------------------------------| | `zone_id ` | no | The program to disable | -| `entity_id` | yes | An entity belonging to the RainMachine controller to adjust | ### `rainmachine.enable_program` @@ -57,7 +55,6 @@ Enable a RainMachine program. | Service Data Attribute | Optional | Description | |---------------------------|----------|-------------------------------------------------------------| | `program_id ` | no | The program to enable | -| `entity_id` | yes | An entity belonging to the RainMachine controller to adjust | ### `rainmachine.enable_zone` @@ -66,7 +63,6 @@ Enable a RainMachine zone. | Service Data Attribute | Optional | Description | |---------------------------|----------|-------------------------------------------------------------| | `zone_id ` | no | The zone to enable | -| `entity_id` | yes | An entity belonging to the RainMachine controller to adjust | ### `rainmachine.pause_watering` @@ -75,7 +71,6 @@ Pause all watering activities for a number of seconds. | Service Data Attribute | Optional | Description | |---------------------------|----------|-------------------------------------------------------------| | `seconds` | no | The number of seconds to pause | -| `entity_id` | yes | An entity belonging to the RainMachine controller to adjust | ### `rainmachine.start_program` @@ -84,7 +79,6 @@ Start a RainMachine program. | Service Data Attribute | Optional | Description | |---------------------------|----------|-------------------------------------------------------------| | `program_id ` | no | The program to start | -| `entity_id` | yes | An entity belonging to the RainMachine controller to adjust | ### `rainmachine.start_zone` @@ -94,16 +88,11 @@ Start a RainMachine zone for a set number of seconds. |---------------------------|----------|-------------------------------------------------------------| | `zone_id` | no | The zone to start | | `zone_run_time` | yes | The number of seconds to run; defaults to 60 seconds | -| `entity_id` | yes | An entity belonging to the RainMachine controller to adjust | ### `rainmachine.stop_all` Stop all watering activities. -| Service Data Attribute | Optional | Description | -|---------------------------|----------|-------------------------------------------------------------| -| `entity_id` | yes | An entity belonging to the RainMachine controller to adjust | - ### `rainmachine.stop_program` Stop a RainMachine program. @@ -111,7 +100,6 @@ Stop a RainMachine program. | Service Data Attribute | Optional | Description | |---------------------------|----------|-------------------------------------------------------------| | `program_id ` | no | The program to stop | -| `entity_id` | yes | An entity belonging to the RainMachine controller to adjust | ### `rainmachine.stop_zone` @@ -120,16 +108,11 @@ Stop a RainMachine zone. | Service Data Attribute | Optional | Description | |---------------------------|----------|-------------------------------------------------------------| | `zone_id ` | no | The zone to stop | -| `entity_id` | yes | An entity belonging to the RainMachine controller to adjust | ### `rainmachine.unpause_watering` Unpause all watering activities. -| Service Data Attribute | Optional | Description | -|---------------------------|----------|-------------------------------------------------------------| -| `entity_id` | yes | An entity belonging to the RainMachine controller to adjust | - ## Switch The `rainmachine` switch platform allows you to control programs and zones within a [RainMachine smart Wi-Fi sprinkler controller](https://www.rainmachine.com/). diff --git a/source/_integrations/rest_command.markdown b/source/_integrations/rest_command.markdown index 40fbbb9e388..bc2ed19ff71 100644 --- a/source/_integrations/rest_command.markdown +++ b/source/_integrations/rest_command.markdown @@ -46,11 +46,11 @@ service_name: required: false type: template username: - description: The username for HTTP authentication. + description: The username for basic HTTP authentication (digest is not supported). required: false type: string password: - description: The password for HTTP authentication. + description: The password for basic HTTP authentication (digest is not supported). required: false type: string timeout: diff --git a/source/_integrations/watson_tts.markdown b/source/_integrations/watson_tts.markdown index bc9999b9a68..b18a116c668 100644 --- a/source/_integrations/watson_tts.markdown +++ b/source/_integrations/watson_tts.markdown @@ -17,7 +17,7 @@ Watson is a paid service via IBM Cloud but there is a decent [free tier](https:/ ## Setup -For supported formats and voices please go to [IBM Cloud About section](https://cloud.ibm.com/docs/services/text-to-speech?topic=text-to-speech-about#about). +For supported formats and voices please go to [IBM Cloud About section](https://cloud.ibm.com/docs/text-to-speech?topic=text-to-speech-voices#languageVoices). To get started please read the [Getting started tutorial](https://cloud.ibm.com/docs/services/text-to-speech?topic=text-to-speech-gettingStarted#gettingStarted). @@ -43,7 +43,7 @@ watson_url: description: "The endpoint to which the service will connect." required: false type: string - default: "`https://stream.watsonplatform.net/text-to-speech/api`" + default: "`https://api.us-south.text-to-speech.watson.cloud.ibm.com`" watson_apikey: description: "Your secret apikey generated on the IBM Cloud admin console." required: true