From 1492c03d3e0a4f2d23382f09366d0c81475cff08 Mon Sep 17 00:00:00 2001 From: rappenze Date: Tue, 14 Mar 2023 10:07:44 +0100 Subject: [PATCH] Update fibaro integration documentation (#26571) Co-authored-by: Franck Nijhof --- source/_integrations/fibaro.markdown | 37 ++++++++++++++++------------ 1 file changed, 21 insertions(+), 16 deletions(-) diff --git a/source/_integrations/fibaro.markdown b/source/_integrations/fibaro.markdown index 19df41b5531..26d4a465662 100644 --- a/source/_integrations/fibaro.markdown +++ b/source/_integrations/fibaro.markdown @@ -1,6 +1,6 @@ --- title: Fibaro -description: Instructions on how to setup Fibaro Z-Wave hubs (HCL and HC2) and configure devices within Home Assistant. +description: Instructions on how to setup Fibaro Home Center and Yubii Home within Home Assistant. ha_category: - Binary Sensor - Climate @@ -29,29 +29,34 @@ ha_config_flow: true ha_integration_type: hub --- -The [Fibaro](https://fibaro.com/) hub is a controller mainly connecting to Z-Wave devices. +The Fibaro integration allows you to connect Home Assistant to a Fibaro Home Center or a Yubii Home hub so that you can control and monitor the connected devices and run scenes. Home Assistant uses a local connection to connect to the Fibaro hub. -There is currently support for the following device types within Home Assistant: +## Supported hub models -- Binary Sensor -- Cover -- Climate -- Light -- Lock -- Sensor -- Scene -- Switch +Fibaro Home Center 2, Home Center Lite, Home Center 3, Home Center 3 Lite, and Yubii Home. -They will be automatically added when the `fibaro` hub is connected to Home Assistant. +## Features -{% include integrations/config_flow.md %} +1. Control devices connected to the hub and synchronize the state of the devices (see platforms for supported devices and capabilities). +2. Entities are automatically added when configuring the Fibaro integration and upon restart of Home Assistant when changed in the Fibaro hub. +3. Support for multiple hubs. +4. Activate scenes defined in the Fibaro hub. + +{% include integrations/config_flow.md %}
- It is recommended to assign a static IP address to your Fibaro controller. This ensures that it won't change its IP address, so you won't have to change the `url` if the controller reboots and comes up with a different IP address. See your router's manual for details on how to set this up. If you need the MAC address of your Fibaro, check the label on the bottom. +It is recommended to assign a static IP address to your Fibaro controller. This ensures that it won't change its IP address, so you won't have to change the `url` if the controller reboots and comes up with a different IP address. See your router's manual for details on how to set this up. If you need the MAC address of your Fibaro, check the label on the bottom.
-### Using Z-Wave devices in automation +## Supported platforms -If you want to use a Z-Wave device from the Fibaro controller in Home Assistant automation, you'll need the entity id. In the Home Assistant UI you'll find all entities listed under **Developer Tools** -> **States**. Look for entities that contain 'fibaro_id' in their attributes, and you'll find the entity id on the left. +- Binary Sensor +- Climate +- Cover +- Light +- Lock +- Scene +- Sensor +- Switch