From 14be6d60ce7b3685a9ab567635ffac8b69fd6948 Mon Sep 17 00:00:00 2001 From: Nico <59510296+N1c093@users.noreply.github.com> Date: Mon, 10 Oct 2022 19:19:43 +0200 Subject: [PATCH] Fix typo on Keymitt MicroBot Push integration (#24413) --- source/_integrations/keymitt_ble.markdown | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/source/_integrations/keymitt_ble.markdown b/source/_integrations/keymitt_ble.markdown index 4b6f683017e..79ce5191680 100644 --- a/source/_integrations/keymitt_ble.markdown +++ b/source/_integrations/keymitt_ble.markdown @@ -19,7 +19,7 @@ This integration allows you to locally control a MicroBot Push (previously manuf ### Prerequisites -In order to use this integration, it is required to have working [Bluetooth](/integrations/blueooth) set up on the device running Home Assistant. A Naran/Keymitt hub is not required. +In order to use this integration, it is required to have working [Bluetooth](/integrations/bluetooth) set up on the device running Home Assistant. A Naran/Keymitt hub is not required. The device will need to be in pairing mode before adding to Home Assistant. To reset the MicroBot Push, turn it off, then back on, and immediately hold the push button while the LED is red. After approximately 5 seconds, the LED will flash rapidly, at which point release the button. The LED will blink blue if the pairing mode has been successfully activated.