jeans/home-assistant.io
jeans/home-assistant.io
1
0
Fork 0
mirror of https://github.com/home-assistant/home-assistant.io.git synced 2025-07-24 01:37:23 +00:00
Code Issues Packages Projects Releases Wiki Activity

Remove line breaks

Browse Source
This commit is contained in:
Fabian Affolter 2016-10-20 21:54:25 +02:00
parent 18fb0ff77f
commit 15794a1f45
No known key found for this signature in database
GPG Key ID: DDF3D6F44AAB1336
2 changed files with 9 additions and 25 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

22
source/_components/media_player.yamaha.markdown
View File

@ -37,19 +37,9 @@ Configuration variables:
A few notes:
- Not specifying the host variable will result in automatically
searching your network for Yamaha Receivers. It will add a media
player device for each one.
- For receivers that support more than one zone, Home Assistant will add
one media player per zone supported by the player, named "$name Zone
2" and "$name Zone 3".
- In some cases, autodiscovery fails due to a known bug in the
receiver's firmware. It is possible to manually specify the
reveiver's IP address or via it's hostname (if it is discoverably by
your DNS) then.
- Please note: If adding the IP address or hostname manually, you
**must** enable network standby on your receiver, or else startup of
Home Assistant will hang if you have your receiver switched off.
- Currently the only controls that are available is Power On/Off,
Mute, and Volume control. Other functions such as source select are
in progress of being developed.
- Not specifying the host variable will result in automatically searching your network for Yamaha Receivers. It will add a media player device for each one.
- For receivers that support more than one zone, Home Assistant will add one media player per zone supported by the player, named "$name Zone 2" and "$name Zone 3".
- In some cases, autodiscovery fails due to a known bug in the receiver's firmware. It is possible to manually specify the reveiver's IP address or via it's hostname (if it is discoverably by your DNS) then.
- Please note: If adding the IP address or hostname manually, you **must** enable network standby on your receiver, or else startup of Home Assistant will hang if you have your receiver switched off.
- Currently the only controls that are available is Power On/Off, Mute, and Volume control. Other functions such as source select are in progress of being developed.

12
source/_components/sensor.arwn.markdown
View File

@ -11,14 +11,9 @@ ha_category: Sensor
ha_release: 0.31
---
The `arwn` sensor platform is a client for the
[Ambient Radio Weather Network](http://github.com/sdague/arwn)
project. This collects weather station data and makes it available in
an MQTT subtree.
The `arwn` sensor platform is a client for the [Ambient Radio Weather Network](http://github.com/sdague/arwn) project. This collects weather station data and makes it available in an MQTT subtree.
To use your ARWN setup, you must already have configured the
[MQTT](mqtt) platform. Then add the following to your
`configuration.yaml` file:
To use your ARWN setup, you must already have configured the [MQTT](mqtt) platform. Then add the following to your `configuration.yaml` file:
```yaml
# Example configuration.yaml entry
@ -26,5 +21,4 @@ sensor:
platform: arwn
```
Currently all temperature, barometer, and wind sensors will be
displayed. Support for rain guage sensors will happen in the future.
Currently all temperature, barometer, and wind sensors will be displayed. Support for rain guage sensors will happen in the future.