mirror of
https://github.com/home-assistant/home-assistant.io.git
synced 2025-07-21 00:06:51 +00:00
Add zwave cover info (#826)
* Add zwave cover info * Wrong filename * add rpi_gpio to cover * Add homematic to cover * Wrong date and Ha version * add rfxtrx to cover * Deprecated warning for garage_door * Deprecated warning for rollershutter
This commit is contained in:
John Arild Berentsen
GitHub
parent
9981cd8e98
commit
17fca881ac
19
source/_components/cover.homematic.markdown
Normal file
19
source/_components/cover.homematic.markdown
Normal file
@ -0,0 +1,19 @@
|
||||
---
|
||||
layout: page
|
||||
title: "Homematic Cover"
|
||||
description: "Instructions how to integrate Homematic covers within Home Assistant."
|
||||
date: 2016-08-24 14:25
|
||||
sidebar: true
|
||||
comments: false
|
||||
sharing: true
|
||||
footer: true
|
||||
logo: homematic.png
|
||||
ha_category: Cover
|
||||
ha_release: 0.27
|
||||
ha_iot_class: "Local Push"
|
||||
---
|
||||
|
||||
|
||||
The `homematic` cover platform lets you control [Homematic](http://www.homematic.com/) covers such as rollershutters through Home Assistant.
|
||||
|
||||
Devices will be configured automatically. Please refer to the [component](/components/homematic/) configuration on how to setup Homematic.
|
||||
68
source/_components/cover.rfxtrx.markdown
Normal file
68
source/_components/cover.rfxtrx.markdown
Normal file
@ -0,0 +1,68 @@
|
||||
---
|
||||
layout: page
|
||||
title: "RFXtrx Cover"
|
||||
description: "Instructions how to integrate RFXtrx covers into Home Assistant."
|
||||
date: 2016-08-24 14:30
|
||||
sidebar: true
|
||||
comments: false
|
||||
sharing: true
|
||||
footer: true
|
||||
logo: rfxtrx.png
|
||||
ha_category: Cover
|
||||
ha_release: 0.27
|
||||
---
|
||||
|
||||
The `rfxtrx` platform supports Siemens/LightwaveRF and RFY roller shutters that communicate in the frequency range of 433.92 MHz.
|
||||
|
||||
First you have to set up your [rfxtrx hub](/components/rfxtrx/).
|
||||
|
||||
### {% linkable_title Configuration %}
|
||||
|
||||
##### Siemens/LightwaveRF
|
||||
The easiest way to find your roller shutters is to add this to your `configuration.yaml`:
|
||||
|
||||
```yaml
|
||||
cover:
|
||||
platform: rfxtrx
|
||||
automatic_add: True
|
||||
```
|
||||
|
||||
Launch your homeassistant and go the website (e.g http://localhost:8123).
|
||||
Push your remote and your device should be added.
|
||||
|
||||
Once added it will show an ID (e.g `0b11000102ef9f210010f70`) and you can verify that it works from the frontend.
|
||||
Then you should update your configuration to:
|
||||
|
||||
```yaml
|
||||
cover:
|
||||
platform: rfxtrx
|
||||
devices:
|
||||
0b11000102ef9f210010f70:
|
||||
name: device_name
|
||||
```
|
||||
|
||||
##### RFY
|
||||
The [RFXtrx433e](http://www.rfxcom.com/RFXtrx433E-USB-43392MHz-Transceiver/en) is required for RFY support, however it does not support receive for the RFY protocol - as such devices cannot be automatically added. Instead, configure the device in the [rfxmngr](http://www.rfxcom.com/downloads.htm) tool. Make a note of the assigned ID and Unit Code and then add a device to the configuration with the following id `071a0000[id][unit_code]`. Eg, if the id was `0a` `00` `01`, and the unit code was `01` then the fully qualified id would be `071a00000a000101`.
|
||||
|
||||
##### Common
|
||||
Example configuration:
|
||||
|
||||
```yaml
|
||||
# Example configuration.yaml entry
|
||||
cover:
|
||||
platform: rfxtrx
|
||||
automatic_add: False
|
||||
signal_repetitions: 2
|
||||
devices:
|
||||
0b1100ce3213c7f210010f70: # Siemens/LightwaveRF
|
||||
name: Bedroom Shutter
|
||||
070a00000a000101: # RFY
|
||||
name: Bathroom Shutter
|
||||
```
|
||||
|
||||
Configuration variables:
|
||||
|
||||
- **devices** (*Required*): A list of devices with their name to use in the frontend.
|
||||
- **automatic_add** (*Optional*): To enable the automatic addition of new roller shutters (Siemens/LightwaveRF only).
|
||||
- **signal_repetitions** (*Optional*): Because the rxftrx device sends its actions via radio and from most receivers it's impossible to know if the signal was received or not. Therefore you can configure the roller shutter to try to send each signal repeatedly.
|
||||
- **fire_event** (*Optional*): Fires an event even if the state is the same as before. Can be used for automations.
|
||||
48
source/_components/cover.rpi_gpio.markdown
Normal file
48
source/_components/cover.rpi_gpio.markdown
Normal file
@ -0,0 +1,48 @@
|
||||
---
|
||||
layout: page
|
||||
title: "Raspberry Pi Cover"
|
||||
description: "Instructions how to setup the Raspberry Pi covers within Home Assistant."
|
||||
date: 2016-08-24 14:28
|
||||
sidebar: true
|
||||
comments: false
|
||||
sharing: true
|
||||
footer: true
|
||||
logo: raspberry-pi.png
|
||||
ha_category: Cover
|
||||
ha_release: 0.27
|
||||
---
|
||||
|
||||
The `rpi_gpio` cover platform allows you to use a Raspberry Pi to control your cover such as Garage doors.
|
||||
|
||||
It uses two pins on the Raspberry Pi.
|
||||
- The `state_pin` will detect if the cover is closed, and
|
||||
- the `relay_pin` will trigger the cover to open or close.
|
||||
|
||||
Although you do not need Andrews Hilliday's software controller when you run Home Assistant, he has written clear instructions on how to hook your garage door & sensors up to your Raspberry Pi, which can be found [here](https://github.com/andrewshilliday/garage-door-controller#hardware-setup).
|
||||
|
||||
To enable Raspberry Pi Covers in your installation, add the following to your `configuration.yaml` file:
|
||||
|
||||
```yaml
|
||||
# Example configuration.yaml entry
|
||||
cover:
|
||||
platform: rpi_gpio
|
||||
state_pull_mode: DOWN
|
||||
relay_time: 1
|
||||
covers:
|
||||
- relay_pin: 10
|
||||
state_pin: 11
|
||||
name: 'Left door'
|
||||
- relay_pin: 12
|
||||
state_pin: 13
|
||||
name: 'Right door'
|
||||
```
|
||||
|
||||
Configuration variables:
|
||||
|
||||
- **covers** array (*Required*): List of your doors.
|
||||
- **name** (*Optional*): Name to use in the Frontend.
|
||||
- **relay_pin** (*Required*): The pin of your Raspberry Pi where the relay is connected.
|
||||
- **state_pin** (*Required*): The pin of your Raspberry Pi to retrieve the state.
|
||||
- **state_pull_mode** (*Optional*): The direction the State pin is pulling. It can be UP or DOWN. Default is UP.
|
||||
- **relay_time** (*Optional*): The time that the relay will be on for in seconds. Default is .2 seconds.
|
||||
|
||||
16
source/_components/cover.zwave.markdown
Normal file
16
source/_components/cover.zwave.markdown
Normal file
@ -0,0 +1,16 @@
|
||||
---
|
||||
layout: page
|
||||
title: "Z-Wave Cover"
|
||||
description: "Instructions how to setup the Z-Wave binary sensors within Home Assistant."
|
||||
date: 2016-08-24 14:15
|
||||
sidebar: true
|
||||
comments: false
|
||||
sharing: true
|
||||
footer: true
|
||||
logo: z-wave.png
|
||||
ha_category: Cover
|
||||
ha_release: 0.27
|
||||
---
|
||||
|
||||
Garage doors and Rollershuters are supported as Cover in Home Assistant.
|
||||
To get your Z-Wave covers working with Home Assistant, follow the instructions for the general [Z-Wave component](/components/zwave/).
|
||||
@ -8,5 +8,6 @@ comments: false
|
||||
sharing: true
|
||||
footer: true
|
||||
---
|
||||
**This component has been deprecated in favor of the "cover" component and will be removed in the future. Please use cover.**
|
||||
|
||||
Home Assistant can give you an interface to control any garage door.
|
||||
|
||||
@ -9,4 +9,6 @@ sharing: true
|
||||
footer: true
|
||||
---
|
||||
|
||||
**This component has been deprecated in favor of the "cover" component and will be removed in the future. Please use cover.**
|
||||
|
||||
Home Assistant can give you an interface to control any rollershutters.
|
||||
|
||||
Loading…
x
Reference in New Issue
Block a user