W800rf32 (#7373)

* Add files via upload

* Add files via upload

* Initial release of documentation for the w800rf32 component, binary_sensor and switch.

* Update missing pieces in docs and properly format yaml section

* Minor change to make it more concise

* Remove switch platform

* Use new configuration format

* Update version and fix mapping error

* Change type from list to map

source/_components/binary_sensor.w800rf32.markdown

@@ -0,0 +1,69 @@
+---
+layout: page
+title: "W800rf32 Binary Sensor"
+description: "Instructions on how to integrate W800rf32 binary sensors into Home Assistant."
+date: 2018-10-16 12:45
+sidebar: true
+comments: false
+sharing: true
+footer: true
+logo: w800rf32.png
+ha_category: Binary Sensor
+ha_release: 0.83
+ha_iot_class: "Local Push"
+---
+
+The `w800rf32` platform supports X10 RF binary sensors such as Palm Pad 
+remotes, key chain remotes, Hawkeye motion detectors, and many, many other X10 RF devices.
+Some that have specifically been used with this are the KR19A keychain, MS16A motion detector
+and the RSS18 four button wall mount keypad.
+
+# Setting up your devices
+
+Once you have set up your [w800rf32 hub](/components/w800rf32/), add the 
+binary sensors to your `configuration.yaml`:
+
+```yaml
+# Example configuration.yaml entry
+binary_sensor:
+  - platform: w800rf32
+    devices:
+      a1:
+        name: motion_hall
+      a2:
+        name: motion_kitchen
+```
+
+{% configuration %}
+devices:
+  description: A list of devices.
+  required: true
+  type: map
+  keys:
+    name:
+      description: Override the name to use in the frontend.
+      required: false
+      type: string
+    device_class:
+      description: "The [type or class of the sensor](/components/binary_sensor/) to set the icon in the frontend."
+      required: false
+      type: device_class
+    off_delay:
+      description: For sensors that only sends 'On' state updates, this variable sets a delay after which the sensor state will be updated back to 'Off'.
+      required: false
+      type: integer
+{% endconfiguration %}
+
+
+Binary sensors have only two states - "on" and "off". Many door or window
+opening sensors will send a signal each time the door/window is open or closed.
+However, depending on their hardware or on their purpose,
+some sensors are only able to signal their "on" state:
+
+- Most motion sensors send a signal each time they detect motion. They stay "on" for a few seconds and go back to sleep, ready to signal other motion events. Usually, they do not send a signal when they go back to sleep.
+
+For those devices, use the *off_delay* parameter.
+It defines a delay after which a device will go back to an "Off" state.
+That "Off" state will be fired internally by Home Assistant, just as if
+the device fired it by itself. If a motion sensor can only send signals
+once every 5 seconds, sets the *off_delay* parameter to *seconds: 5*.

source/_components/w800rf32.markdown

@@ -0,0 +1,38 @@
+---
+layout: page
+title: "W800rf32"
+description: "Instructions on how to integrate a W800rf32(a) into Home Assistant."
+date: 2018-10-16 10:15
+sidebar: true
+comments: false
+sharing: true
+footer: true
+logo: w800rf32.png
+ha_category: Hub
+ha_release: 0.83
+ha_iot_class: "Local Push"
+---
+
+The `w800rf32` component supports W800RF32 devices by [WGL Designs](http://www.wgldesigns.com/w800.html) which 
+communicate in the frequency range of 310MHz or if you are outside Canada or the U.S., 433.92 MHz.  
+
+The W800 family of RF receivers are designed to receive X10 RF signals generated from X10 products: Palm Pad 
+remotes, key chain remotes, Hawkeye motion detectors, and many, many other X10 RF devices.
+
+To enable W800rf32 in your installation, add the following to your `configuration.yaml` file:
+
+```yaml
+# Example configuration.yaml entry
+w800rf32:
+  device: PATH_TO_DEVICE
+```
+
+{% configuration %}
+device:
+  description: "The path to USB/serial device, example: /dev/ttyUSB0."
+  required: true
+  type: string
+{% endconfiguration %}
+
+
+