Add metoffice

source/_components/sensor.metoffice.markdown

@@ -0,0 +1,51 @@
+---
+layout: page
+title: "Met Office Sensor"
+description: "Instructions on how to integrate Met Office weather conditions into Home Assistant."
+date: 2017-03-23 22:00
+sidebar: true
+comments: false
+sharing: true
+footer: true
+logo: metoffice.png
+ha_category: Weather
+ha_release: 0.41
+---
+
+The `metoffice` sensor platform uses the Met Office's [DataPoint API][datapoint] for weather data.
+
+- Each sensor will be given the `device_id` of "Met Office [condition]"
+- The sensor checks for new data every minute, starting 30 minutes after the timestamp of the most recent data as the data is updated every half-hour.
+
+To add the Met Office weather to your installation you'll need to register for a free api key at the link above and then add the following to your `configuration.yaml` file:
+
+```yaml
+# Example configuration.yaml entry
+sensor:
+  - platform: metoffice
+    api_key: "my-api-key"
+    monitored_conditions:
+      - weather
+      - temperature
+      - feels_like_temperature
+      - wind_speed
+      - wind_direction
+      - wind_gust
+      - visibility
+      - uv
+      - precipitation
+      - humidity
+```
+
+Your location will be detected from your home `latitude` and `longitude` settings.
+
+Configuration variables:
+
+- **api_key** (*Required*): Your personal API key from the [Datapoint website][datapoint].
+
+<p class='note'>
+This sensor is an alternative to the [`metoffice`](/components/weather.metoffice/) weather platform.
+The weather platform is easier to configure but less customisable.
+</p>
+
+[datapoint]: http://www.metoffice.gov.uk/datapoint

source/_components/weather.metoffice.markdown

@@ -0,0 +1,34 @@
+---
+layout: page
+title: "Met Office"
+description: "Instructions on how to integrate Met Office weather conditions into Home Assistant."
+date: 2017-03-23 22:00
+sidebar: true
+comments: false
+sharing: true
+footer: true
+logo: metoffice.png
+ha_category: Weather
+ha_release: 0.41
+---
+
+The `metoffice` weather platform uses the Met Office's [DataPoint API][datapoint] for weather data.
+
+To add the Met Office weather platform to your installation you'll need to register for a free api key at the link above and then add the following to your `configuration.yaml` file:
+
+```yaml
+weather:
+  - platform: metoffice
+    api_key: "my-api-key"
+```
+
+Configuration variables:
+  
+- **api_key** (*Required*): Your personal API key from the [Datapoint website][datapoint].
+
+<p class='note'>
+This platform is an alternative to the [`metoffice`](/components/sensor.metoffice/) sensor.
+The weather platform is easier to configure but less customisable.
+</p>
+
+[datapoint]: http://www.metoffice.gov.uk/datapoint